ERZV10D511CS

Varistors (ZNR Surge Absorber) Type D D type V series For Varistor Voltages ranging from 200 to 1100V, kindly also consider corresponding, smaller E Series devices with better performance for their size. → Please click here Features ●Large withstanding surge current capability in compact sizes ●Large “Energy Handling Capability” absorbing transient overvoltages in compact sizes ●Wide range of varistor voltages ●RoHS compliant Recommended applications ●Transistor, diode, IC, thyristor or triac semiconductor protection ●Surge protection in consumer electronic equipment ●Surge protection in communication, measuring or controller electronics ●Surge protection in electronic home appliances, gas or petroleum appliances Applicable standards ●UL1449 (VZCA2/UL, VZCA8/C-UL) ●VDE IEC61051-1，-2，-2-2，IEC60950-1 Annex.Q, IEC62368-1 G8.2 ●CSA C22.2 N 269.5 ●CQC (GB/T10193, GB/T10194, GB4943.1, GB8898) Refer to "Standard Products" , and "Application Note for Safety Standards" , for the details. ■As for handling precautions and minimum quantity / packing unit, please see related information Explanation of part numbers (Bulk) 1 2 3 4 5 6 7 Ｅ Ｒ Ｚ Ｖ 　 　 Ｄ Product code 8 9 10 11 12 　 　 　 　 Series Design No. Code Element size Code Element size Code 05 ø5 mm 10 ø10 mm D Straight lead 07 ø7 mm 14 ø14 mm V Crimped lead* 09 ø10 mm 20 ø20 mm Norminal varistor voltage Lead configuration The first two digits are significant figures and the third one denotes the number of zeros following. *Excluding ø20 *Only the lead cut Explanation of part numbers (Taping) 1 2 3 4 5 6 7 Ｅ Ｒ Ｚ Ｖ 　 　 Ｄ Product code 8 9 10 11 12 　 　 　 　 Series Code Taping / Packaging A to D Radial taping(Po=12.7 mm) E to H Radial taping(Po=15.0 mm) Design No. Lead configuration Code Element size Code 5 ø5 mm D Straight lead 7 ø7 mm V Crimped lead 9 ø10 mm A ø10 mm E ø14 mm Norminal varistor voltage The first two digits are significant figures and the third one denotes the number of zeros following. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 23-Dec-21 Varistors (ZNR Surge Absorber) Type D Reference guide to standard products Part No. Applicable standards Varistor voltage* Maximum allowable voltage Clamping voltage at 8/20 μs Maximum Peak current at 8/20 μs (A) Type name Approvals max.(V) lp(A) １time ２times ERZV05D180 V180 ◇ 40 1 250 125 ERZV07D180 V7180 ◇ 36 2.5 500 250 ERZV09D180 V9180 ◇ 36 5 1000 500 ERZV10D180 V10180 ◇ 36 5 1000 500 ERZV14D180 V14180 ◇ 36 10 2000 1000 ERZV20D180 V20180 ◇ 36 20 3000 2000 ERZV05D220 V220 ◇ 48 1 250 125 ERZV07D220 V7220 ◇ 43 2.5 500 250 ERZV09D220 V9220 ◇ 43 5 1000 500 ERZV10D220 V10220 ◇ 43 5 1000 500 ERZV14D220 V14220 ◇ 43 10 2000 1000 ERZV20D220 V20220 ◇ 43 20 3000 2000 ERZV05D270 V270 ◇ 60 1 250 125 ERZV07D270 V7270 ◇ 53 2.5 500 250 ERZV09D270 V9270 ◇ 53 5 1000 500 ERZV10D270 V10270 ◇ 53 5 1000 500 ERZV14D270 V14270 ◇ 53 10 2000 1000 ERZV20D270 V20270 ◇ 53 20 3000 2000 ERZV05D330 V330 ◇ 73 1 250 125 ERZV07D330 V7330 ◇ 65 2.5 500 250 ERZV09D330 V9330 ◇ 65 5 1000 500 ERZV10D330 V10330 ◇ 65 5 1000 500 ERZV14D330 V14330 ◇ 65 10 2000 1000 ERZV20D330 V20330 ◇ 65 20 3000 2000 ERZV05D390 V390 ◇ 86 1 250 125 ERZV07D390 V7390 ◇ 77 2.5 500 250 ERZV09D390 V9390 ◇ 77 5 1000 500 ERZV10D390 V10390 ◇ 77 5 1000 500 ERZV14D390 V14390 ◇ 77 10 2000 1000 ERZV20D390 V20390 ◇ 77 20 3000 2000 ERZV05D470 V470 ◇ 104 1 250 125 ERZV07D470 V7470 ◇ 93 2.5 500 250 ERZV09D470 V9470 ◇ 93 5 1000 500 ERZV10D470 V10470 ◇ 93 5 1000 500 ERZV14D470 V14470 ◇ 93 10 2000 1000 ERZV20D470 V20470 ◇ 93 20 3000 2000 ERZV05D560 V560 ◇ 123 1 250 125 ERZV07D560 V7560 ◇ 110 2.5 500 250 ERZV09D560 V9560 ◇ 110 5 1000 500 ERZV10D560 V10560 ◇ 110 5 1000 500 ERZV14D560 V14560 ◇ 110 10 2000 1000 ERZV20D560 V20560 ◇ 110 20 3000 2000 ERZV05D680 V680 ◇ 150 1 250 125 ERZV07D680 V7680 ◇ 135 2.5 500 250 ERZV09D680 V9680 ◇ 135 5 1000 500 ERZV10D680 V10680 ◇ 135 5 1000 500 ERZV14D680 V14680 ◇ 135 10 2000 1000 ERZV20D680 V20680 ◇ 135 20 3000 2000 ＊Measuring Current of Varistor Voltage （V） 18 (16 to 20) 22 (20 to 24) 27 (24 to 30) 33 (30 to 36) 39 (35 to 43) 47 (42 to 52) 56 (50 to 62) 68 (61 to 75) AC rms (Ｖ) 11 14 17 20 25 30 35 40 DC (Ｖ) 14 18 22 26 31 38 45 56 5 Series（ERZV05D □□□）：0.1 mA，Others：1 mA ○: UL1449 (VZCA2/UL, VZCA8/C-UL), ☆:VDE (IEC61051-1, -2, -2-2), ★ : VDE (IEC60950-1 Annex.Q, IEC62368-1 G8.2 ), □ : CSA C22.2 No.269.5 ◇: CQC (GB/T10193, GB/T10194), ◆ : CQC (GB4943.1, GB8898) ※Approval number (File No.) of safety regulations are subject to revision without notice. Ask factory for a copy of the latest file No. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 23-Dec-21 Varistors (ZNR Surge Absorber) Type D Reference guide to standard products Applicable standards Part No. Varistor voltage* ２times Approvals max.(V) lp (A) １time V820U ○☆◇ 145 5 800 600 ERZV07D820 V7820U ○☆◇ 135 10 1750 1250 ERZV09D820 V9820U ○☆◇ 135 25 3500 2500 ERZV10D820 V10820U ○☆◇ 135 25 3500 2500 ERZV14D820 V14820U ○☆◇ 135 50 6000 5000 ERZV20D820 V20820U ○☆◇ 135 100 10000 7000 ERZV05D101 V101U ○☆◇ 175 5 800 600 ERZV07D101 V7101U ○☆◇ 165 10 1750 1250 ERZV09D101 V9101U ○☆◇ 165 25 3500 2500 ERZV10D101 V10101U ○☆◇ 165 25 3500 2500 ERZV14D101 V14101U ○☆◇ 165 50 6000 5000 ERZV20D101 V20101U ○☆◇ 165 100 10000 7000 ERZV05D121 V121U ○☆◇ 210 5 800 600 ERZV07D121 V7121U ○☆◇ 200 10 1750 1250 ERZV09D121 V9121U ○☆◇ 200 25 3500 2500 ERZV10D121 V10121U ○☆◇ 200 25 3500 2500 ERZV14D121 V14121U ○☆◇ 200 50 6000 5000 ERZV20D121 V20121U ○☆◇ 200 100 10000 7000 ERZV05D151 V151U ○☆◇ 260 5 800 600 ERZV07D151 V7151U ○☆◇ 250 10 1750 1250 ERZV09D151 V9151U ○☆◇ 250 25 3500 2500 ERZV10D151 V10151U ○☆◇ 250 25 3500 2500 ERZV14D151 V14151U ○☆◇ 250 50 6000 5000 ERZV20D151 V20151U ○☆◇ 250 100 10000 7000 ERZV05D201 V201U ○☆□◇ 355 5 800 600 ERZV07D201 V7201U ○☆□◇ 340 10 1750 1250 ERZV09D201 V9201U ○☆□◇ 340 25 3500 2500 ERZV10D201 V10201U ○☆□◇ 340 25 3500 2500 ERZV14D201 V14201U ○☆★□◇◆ 340 50 6000 5000 ERZV20D201 V20201U ○☆★□◇◆ 340 100 10000 7000 ERZV05D221 V221U ○☆□◇ 380 5 800 600 ERZV07D221 V7221U ○☆□◇ 360 10 1750 1250 ERZV09D221 V9221U ○☆□◇ 360 25 3500 2500 ERZV10D221 V10221U ○☆□◇ 360 25 3500 2500 ERZV14D221 V14221U ○☆★□◇◆ 360 50 6000 5000 ERZV20D221 V20221U ○☆★□◇◆ 360 100 10000 7000 ERZV05D241 V241U ○☆□◇ 415 5 800 600 ERZV07D241 V7241U ○☆□◇ 395 10 1750 1250 ERZV09D241 V9241U ○☆□◇ 395 25 3500 2500 ERZV10D241 V10241U ○☆□◇ 395 25 3500 2500 ERZV14D241 V14241U ○☆★□◇◆ 395 50 6000 5000 ERZV20D241 V20241U ○☆★□◇◆ 395 100 10000 7000 ERZV05D271 V271U ○☆□◇ 475 5 800 600 ERZV07D271 V7271U ○☆□◇ 455 10 1750 1250 ERZV09D271 V9271U ○☆□◇ 455 25 3500 2500 ERZV10D271 V10271U ○☆□◇ 455 25 3500 2500 ERZV14D271 V14271U ○☆★□◇◆ 455 50 6000 5000 ERZV20D271 V20271U ○☆★□◇◆ 455 100 10000 7000 100 (90 to 110) 120 (108 to 132) 150 (135 to 165) 200 (185 to 225) 220 (198 to 242) 240 (216 to 264) 270 (247 to 303) 50 60 75 95 130 140 150 175 DC (Ｖ) Maximum peak current at 8/20 μs (A) Type name 82 (74 to 90) AC rms (Ｖ) Clamping voltage at 8/20 μs ERZV05D820 ＊Measuring Current of Varistor Voltage （V） Maximum allowable voltage 65 85 100 125 170 180 200 225 5 Series（ERZV05D □□□）：0.1 mA，Others：1 mA ○: UL1449 (VZCA2/UL, VZCA8/C-UL), ☆:VDE (IEC61051-1, -2, -2-2), ★ : VDE (IEC60950-1 Annex.Q, IEC62368-1 G8.2 ), □ : CSA C22.2 No.269.5 ◇: CQC (GB/T10193, GB/T10194), ◆ : CQC (GB4943.1, GB8898) ※Approval number (File No.) of safety regulations are subject to revision without notice. Ask factory for a copy of the latest file No. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 23-Dec-21 Varistors (ZNR Surge Absorber) Type D Reference guide to standard products Part No. Applicable standards Varistor voltage* （V） Maximum allowable voltage ２times Type name Approvals max.(V) lp (A) １time V331U ○☆□◇ 570 5 800 600 ERZV07D331 V7331U ○☆□◇ 545 10 1750 1250 ERZV09D331 V9331U ○☆□◇ 545 25 3500 2500 ERZV10D331 V10331U ○☆□◇ 545 25 3500 2500 ERZV14D331 V14331U ○☆★□◇◆ 545 50 6000 4500 ERZV20D331 V20331U ○☆★□◇◆ 545 100 10000 6500 ERZV05D361 V361U ○☆□◇ 620 5 800 600 ERZV07D361 V7361U ○☆□◇ 595 10 1750 1250 ERZV09D361 V9361U ○☆□◇ 595 25 3500 2500 ERZV10D361 V10361U ○☆□◇ 595 25 3500 2500 ERZV14D361 V14361U ○☆★□◇◆ 595 50 6000 4500 ERZV20D361 V20361U ○☆★□◇◆ 595 100 10000 6500 ERZV05D391 V391U ○☆□◇ 675 5 800 600 ERZV07D391 V7391U ○☆□◇ 650 10 1750 1250 ERZV09D391 V9391U ○☆□◇ 650 25 3500 2500 ERZV10D391 V10391U ○☆□◇ 650 25 3500 2500 ERZV14D391 V14391U ○☆★□◇◆ 650 50 6000 4500 ERZV20D391 V20391U ○☆★□◇◆ 650 100 10000 6500 ERZV05D431 V431U ○☆□◇ 745 5 800 600 ERZV07D431 V7431U ○☆□◇ 710 10 1750 1250 ERZV09D431 V9431U ○☆□◇ 710 25 3500 2500 ERZV10D431 V10431U ○☆□◇ 710 25 3500 2500 ERZV14D431 V14431U ○☆★□◇◆ 710 50 6000 4500 ERZV20D431 V20431U ○☆★□◇◆ 710 100 10000 6500 ERZV05D471 V471U ○☆□◇ 810 5 800 600 ERZV07D471 V7471U ○☆□◇ 775 10 1750 1250 775 25 3500 2500 775 25 3500 2500 360 (324 to 396) 390 (351 to 429) 430 (387 to 473) 210 230 250 275 DC (Ｖ) Maximum peak current at 8/20 μs (A) ERZV05D331 330 (297 to 363) AC rms (Ｖ) Clamping voltage at 8/20 μs 270 300 320 350 ERZV09D471 V9471U ○☆□◇ ERZV10D471 V10471U ○☆★□◇◆ ERZV14D471 V14471U ○☆★□◇◆ 775 50 6000 4500 ERZV20D471 V20471U ○☆★□◇◆ 775 100 10000 6500 ERZV07D511 V7511U ○☆□◇ 845 10 1750 1250 ERZV09D511 V9511U ○☆□◇ 845 25 3500 2500 ERZV10D511 V10511U ○☆★□◇◆ 845 25 3500 2500 ERZV14D511 V14511U ○☆★□◇◆ 845 50 6000 4500 ERZV20D511 V20511U ○☆★□◇◆ 845 100 10000 6500 ERZV10D561 V10561U ○☆★□◇◆ 930 25 3500 2500 ERZV14D561 V14561U ○☆★□◇◆ 930 50 5000 4500 ERZV20D561 V20561U ○☆★□◇◆ 930 100 7500 6500 ERZV10D621 V10621U ○☆★□◇◆ 1025 25 3500 2500 ERZV14D621 V14621U ○☆★□◇◆ 1025 50 5000 4500 ERZV20D621 V20621U ○☆★□◇◆ 1025 100 7500 6500 ERZV10D681 V10681U ○☆★□◇◆ 1120 25 3500 2500 ERZV14D681 V14681U ○☆★□◇◆ 1120 50 5000 4500 ERZV20D681 V20681U ○☆★□◇◆ 1120 100 7500 6500 ＊Measuring Current of Varistor Voltage 470 (423 to 517) 510 (459 to 561) 560 (504 to 616) 620 (558 to 682) 680 (612 to 748) 300 320 350 385 420 385 410 450 505 560 5 Series（ERZV05D □□□）：0.1 mA，Others：1 mA ○: UL1449 (VZCA2/UL, VZCA8/C-UL), ☆:VDE (IEC61051-1, -2, -2-2), ★ : VDE (IEC60950-1 Annex.Q, IEC62368-1 G8.2 ), □ : CSA C22.2 No.269.5 ◇: CQC (GB/T10193, GB/T10194), ◆ : CQC (GB4943.1, GB8898) ※Approval number (File No.) of safety regulations are subject to revision without notice. Ask factory for a copy of the latest file No. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 23-Dec-21 Varistors (ZNR Surge Absorber) Type D Reference guide to standard products Part No. Applicable standards Type name Approvals ERZV10D751 V10751U ○☆★□◇◆ ERZV14D751 V14751U ○☆★□◇◆ ERZV20D751 V20751U ○☆★□◇◆ ERZV10D821 V10821U ○☆★□◇◆ ERZV14D821 V14821U ○☆★□◇◆ ERZV20D821 V20821U ○☆★□◇◆ ERZV10D911 V10911U ○☆★□◇◆ ERZV14D911 V14911U ○☆★□◇◆ ERZV20D911 V20911U ○☆★□◇◆ ERZV10D102 V10102U ○☆★□◇◆ ERZV14D102 V14102U ○☆★□◇◆ ERZV20D102 V20102U ○☆★□◇◆ ERZV10D112 V10112U ○☆★□◇◆ ERZV14D112 V14112U ○☆★□◇◆ ERZV20D112 V20112U ○☆★□◇◆ ERZV10D182CS V10182U ○☆★□◇◆ ERZV14D182CS V14182U ERZV20D182 V20182U Varistor voltage* （V） Maximum allowable voltage AC rms (Ｖ) 750 (675 to 825) 460 820 (738 to 902) 510 910 (819 to 1001) 550 1000 (900 to 1100) 1100 (990 to 1210) 1800 ○☆★□◇◆ (1700 to 1980) 625 680 1000 DC (Ｖ) 615 670 745 825 895 1465 ○☆★□◇◆ ＊Measuring Current of Varistor Voltage Maximum peak current at 8/20 μs (A) Clamping voltage 8/20 μs max.(V) lp (A) 1 time 2 times 1240 *25 3500 2500 1240 *50 5000 4500 1240 100 7500 6500 1355 *25 3500 2500 1355 *50 5000 4500 1355 100 7500 6500 1500 *25 3500 2500 1500 *50 5000 4500 1500 100 7500 6500 1650 *25 3500 2500 1650 *50 5000 4500 1650 100 7500 6500 1815 *25 3500 2500 1815 *50 5000 4500 1815 100 7500 6500 2970 *25 3500 2500 2970 *50 5000 4500 2970 100 7500 6500 5 Series（ERZV05D □□□）：0.1 mA，Others：1 mA ○: UL1449 (VZCA2/UL, VZCA8/C-UL), ☆:VDE (IEC61051-1, -2, -2-2), ★ : VDE (IEC60950-1 Annex.Q, IEC62368-1 G8.2 ), □ : CSA C22.2 No.269.5 ◇: CQC (GB/T10193, GB/T10194), ◆ : CQC (GB4943.1, GB8898) ※Approval number (File No.) of safety regulations are subject to revision without notice. Ask factory for a copy of the latest file No. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 23-Dec-21 Varistors (ZNR Surge Absorber) Type D ５Series Ratings and characteristics ●Operating temperature range : ‒40 to 85 ℃　●Storage temperature range : ‒40 to 125 ℃ Part No. Maximum allowable voltage Varistor voltage Clamping voltage （max.） **lp Rated power Maximum peak current (8/20 μs) Maximum energy Capacitance (max.) (10/1000 μs) (2 ms) (J) (J) （A） （A） 0.01 0.6 0.4 250 125 1600 0.01 0.7 0.5 250 125 1500 *60 0.01 0.9 0.7 250 125 1450 *26 *73 0.01 1.1 0.8 250 125 1400 *25 *31 *86 0.01 1.2 0.9 250 125 *700 47(42 to 52) *30 *38 104 0.01 1.5 1.1 250 125 *650 56(50 to 62) *35 *45 123 0.01 1.8 1.3 250 125 *600 1.6 Ｖ0.1 ｍＡ(Ｖ) AC rms (Ｖ) DC (Ｖ) (Ｖ) (W) ERZV05D180 18(16 to 20) *11 *14 *40 ERZV05D220 22(20 to 24) *14 *18 *48 ERZV05D270 27(24 to 30) *17 *22 ERZV05D330 33(30 to 36) *20 ERZV05D390 39(35 to 43) ERZV05D470 ERZV05D560 1 time 2 times at 1 kHz (pF) ERZV05D680 68(61 to 75) *40 *56 150 0.01 2.2 250 125 *580 ERZV05D820 82(74 to 90) *50 *65 145 0.1* 3.5 2.5 800 600 *460 ERZV05D101 100(90 to 110) *60 *85 175 0.1* 4.0 3.0 800 600 *400 ERZV05D121 120(108 to 132) *75 100 210 0.1* 5.0 3.5 800 600 *350 ERZV05D151 150(135 to 165) *95 125 260 0.1* 6.5 4.5 800 600 *300 ★The following part numbers, kindly also consider corresponding, smaller E Series devices with better performance for their size. ERZV05D201 200(185 to 225) 130 170 355 0.1* 8.5 6.0 ERZV05D221 220(198 to 242) 140 180 380 0.1* 9.0 Please click here → 800 600 *120 6.5 800 600 *110 7.5 ERZV05D241 240(216 to 264) 150 200 415 0.1* 10.5 800 600 ERZV05D271 270(247 to 303) 175 225 475 0.1* 11.0 8.0 800 600 ERZV05D331 330(297 to 363) 210 270 570 0.1* 13.0 9.5 800 600 ERZV05D361 360(324 to 396) 230 300 620 0.1* 16.0 11.0 800 600 ERZV05D391 390(351 to 429) 250 320 675 0.1* 17.0 12.0 800 600 ERZV05D431 430(387 to 473) 275 350 745 0.1* 20.0 13.5 800 600 ERZV05D471 470(423 to 517) 300 385 810 0.1* 21.0 15.0 800 600 *100 ***90✽ ***80✽ ***80✽ ***80✽ ***70✽ ***60✽ ✽Measured at 1 MHz　　　✽✽Ip Measuring current of clamping voltage 180 to 680 : 1 A, 820 to 471 : 5 A Dimensions in mm (not to scale) W±1.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 H max. 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 Unit : mm L±1.0 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.4 1.6 1.8 2.1 ★The following part numbers, kindly also consider corresponding, smaller E Series devices with better performance for their size. → Please click here ERZV05D201 ERZV05D221 ERZV05D241 ERZV05D271 ERZV05D331 ERZV05D361 ERZV05D391 ERZV05D431 ERZV05D471 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 4.4 4.5 4.6 4.8 5.1 5.3 5.4 5.6 5.8 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 1.7 1.8 1.9 2.1 2.4 2.5 2.7 2.9 3.1 D T L W ø0.6 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. L T max. 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.1 4.3 4.5 4.8 H D max. 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 20.0 min. Part No. ERZV05D180 ERZV05D220 ERZV05D270 ERZV05D330 ERZV05D390 ERZV05D470 ERZV05D560 ERZV05D680 ERZV05D820 ERZV05D101 ERZV05D121 ERZV05D151 W 23-Dec-21 Varistors (ZNR Surge Absorber) Type D Typical Characteristics Voltage vs. Current Impulse Derating ERZV05D180 to ERZV05D680 400 ERZV05D180 to ERZV05D680 1000 Max.Clamping Voltage Max.Leakage Current up to 106 times : 10 sec. interval 560 470 200 390 330 100 270 390 100 90 80 70 60 220 180 Impulse Current（A) Voltage（V） 2 times：5 min. interval up to 10 times：2 min. interval 680 300 50 40 30 20 10 9 8 7 6 10 1 5 Test current waveform 4 10–6 to 10–4 A: Direct current 10–1 to 103 A: 8/20 μs 3 10-6 10-5 10-4 10-3 10-2 10-1 100 101 102 103 104 0.1 105 20 Current（A） Max.Leakage Current 1000 up to 10 times：2 min. interval up to 106 times : 10 sec. interval 471 431 391 361 331 271 241 221 201 500 100 Impulse Current（A) 600 Voltage（V） 10000 2 times：5 min. interval Max.Clamping Voltage 700 151 400 121 101 300 820 200 100 90 80 70 60 10 1 50 Test current waveform 331 10–6 to 10–4 A: Direct current 10–1 to 103 A: 8/20 μs 221 40 30 1000 ERZV05D820 to ERZV05D471 431 391 361 1000 900 800 100 Impulse Width（μs） ERZV05D820 to ERZV05D471 2000 (Relation between impulse width and impulse current multiple) 10-6 10-5 10-4 10-3 10-2 10-1 100 Current（A） 101 102 103 104 105 0.1 20 100 1000 Impulse Width（μs） Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 10000 23-Dec-21 Varistors (ZNR Surge Absorber) Type D 7 Series Ratings and characteristics ●Operating temperature range : ‒40 to 85 ℃　●Storage temperature range : ‒40 to 125 ℃ Part No. ERZV07D180 ERZV07D220 ERZV07D270 ERZV07D330 ERZV07D390 ERZV07D470 ERZV07D560 ERZV07D680 ERZV07D820 ERZV07D101 ERZV07D121 ERZV07D151 Maximum allowable voltage Varistor voltage Clamping voltage （max.） **lp Rated power Ｖ1 ｍＡ(Ｖ) AC rms (Ｖ) DC (Ｖ) (Ｖ) (W) 18(16 to 20) 22(20 to 24) 27(24 to 30) 33(30 to 36) 39(35 to 43) 47(42 to 52) 56(50 to 62) 68(61 to 75) 82(74 to 90) 100(90 to 110) 120(108 to 132) 150(135 to 165) *11 *14 *17 *20 *25 *30 *35 *40 *50 *60 *75 *95 *14 *18 *22 *26 *31 *38 *45 *56 *65 *85 100 125 *36 *43 *53 *65 *77 *93 110 135 135 165 200 250 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.25 0.25 0.25 0.25 (10/1000 μs) (2 ms) (J) 1.1 1.3 1.6 2.0 2.4 2.8 3.4 4.1 7 8.5 10 13 (J) *0.9 *1.1 *1.3 *1.6 *1.9 *2.3 *2.7 *3.3 5 6 7 9 ★The following part numbers, kindly also consider corresponding, smaller E Series devices with better performance for their size. ERZV07D201 ERZV07D221 ERZV07D241 ERZV07D271 ERZV07D331 ERZV07D361 ERZV07D391 ERZV07D431 ERZV07D471 ERZV07D511 200(185 220(198 240(216 270(247 330(297 360(324 390(351 430(387 470(423 510(459 to to to to to to to to to to 225) 242) 264) 303) 363) 396) 429) 473) 517) 561) 130 140 150 175 210 230 250 275 300 320 170 180 200 225 270 300 320 350 385 410 340 360 395 455 545 595 650 710 775 845 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 Maximum peak current (8/20 μs) Maximum energy 17.5 19 21 24 28 32 35 40 42 45 → 12.5 13.5 15* 17* 20* 23* 25* 27.5 30* 32* Capacitance (max.) 1 time 2 times （A） （A） 500 500 500 500 500 500 500 500 1750 1750 1750 1750 250 250 250 250 250 250 250 250 1250 1250 1250 1250 at 1 kHz (pF) 3800 3600 3400 2900 1600 1550 1500 1200 *810 *700 *590 *500 Please click here 1750 1750 1750 1750 1750 1750 1750 1750 1750 1750 1250 1250 1250 1250 1250 1250 1250 1250 1250 1250 *200 *190 *170 *150 *130 *130 *130 *120 *100 ***90✽ ✽Measured at 1 MHz　　　✽✽Ip Measuring current of clamping voltage 180 to 680 : 2.5 A, 820 to 511 : 10 A Dimensions in mm (not to scale) W±1.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 H max. 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 Unit : mm L±1.0 1.3 1.4 1.5 1.7 1.6 1.7 1.8 2.0 1.4 1.6 1.8 2.1 ★The following part numbers, kindly also consider corresponding, smaller E Series devices with better performance for their size. → Please click here ERZV07D201 ERZV07D221 ERZV07D241 ERZV07D271 ERZV07D331 ERZV07D361 ERZV07D391 ERZV07D431 ERZV07D471 ERZV07D511 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 4.4 4.5 4.6 4.8 5.1 5.3 5.4 5.6 5.8 6.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 1.7 1.8 1.9 2.1 2.4 2.5 2.7 2.9 3.1 3.3 D T L W ø0.6 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. L T max. 4.5 4.6 4.7 4.9 4.8 4.9 5.0 5.2 4.1 4.3 4.5 4.8 H D max. 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 20.0 min. Part No. ERZV07D180 ERZV07D220 ERZV07D270 ERZV07D330 ERZV07D390 ERZV07D470 ERZV07D560 ERZV07D680 ERZV07D820 ERZV07D101 ERZV07D121 ERZV07D151 W 23-Dec-21 Varistors (ZNR Surge Absorber) Type D Typical Characteristics Voltage vs. Current Impulse Derating (Relation between impulse width and impulse current multiple) ERZV07D180 to ERZV07D680 ERZV07D180 to ERZV07D680 1000 Max.Leakage Current 400 2 times：5 min. interval Max.Clamping Voltage up to 10 times：2 min. interval 680 300 up to 106 times : 10 sec. interval 560 470 200 390 330 270 100 90 80 70 180 Impulse Current（A) Voltage（V） 100 220 60 50 40 30 20 10 9 8 7 1 6 Test current waveform 5 10–6 to 10–3 A: Direct current 10–1 to 103 A: 8/20 μs 4 3 10 10-6 10-5 10-4 10-3 10-2 10-1 100 101 102 103 104 0.1 105 Current（A） 20 100 1000 10000 Impulse Width（μs） ERZV07D820 to ERZV07D511 ERZV07D820 to ERZV07D511 10000 2 times：5 min. interval Max.Leakage Current 2000 up to 10 times：2 min. interval Max.Clamping Voltage 471 431 391 361 1000 900 800 700 1000 271 500 Impulse Current（A) 241 221 201 600 Voltage（V） up to 106 times : 10 sec. interval 511 471 431 391 361 331 151 400 121 300 101 820 200 100 90 80 70 60 10 Test current waveform 50 10–6 to 10–3 A: Direct current 10–1 to 104 A: 8/20 μs 331 321 40 30 100 10-6 10-5 10-4 10-3 10-2 10-1 100 Current（A） 101 102 103 104 105 1 20 100 1000 10000 Impulse Width（μs） Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 23-Dec-21 Varistors (ZNR Surge Absorber) Type D 9 Series Ratings and characteristics ●Operating temperature range : ‒40 to 85 ℃　●Storage temperature range : ‒40 to 125 ℃ Part No. ERZV09D180 ERZV09D220 ERZV09D270 ERZV09D330 ERZV09D390 ERZV09D470 ERZV09D560 ERZV09D680 ERZV09D820 ERZV09D101 ERZV09D121 ERZV09D151 Maximum allowable voltage Varistor voltage Clamping voltage （max.） **lp Rated power Ｖ1 ｍＡ(Ｖ) AC rms (Ｖ) DC (Ｖ) (Ｖ) (W) 18(16 to 20) 22(20 to 24) 27(24 to 30) 33(30 to 36) 39(35 to 43) 47(42 to 52) 56(50 to 62) 68(61 to 75) 82(74 to 90) 100(90 to 110) 120(108 to132) 150(135 to 165) *11 *14 *17 *20 *25 *30 *35 *40 *50 *60 *75 *95 *14 *18 *22 *26 *31 *38 *45 *56 *65 *85 100 125 *36 *43 *53 *65 *77 *93 110 135 135 165 200 250 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.4 0.4 0.4 0.4 (10/1000 μs) (2 ms) 1 time 2 times (J) 2.6 3.2 3.9 4.8 5.6 6.8 8.1 9.8 14.0 17 20 25 (J) 2.2 2.6 3.2 4.0 4.7 5.6 6.7 8.2 10 12 *14.5 18 （A） （A） 1000 1000 1000 1000 1000 1000 1000 1000 3500 3500 3500 3500 500 500 500 500 500 500 500 500 2500 2500 2500 2500 ★The following part numbers, kindly also consider corresponding, smaller E Series devices with better performance for their size. ERZV09D201 ERZV09D221 ERZV09D241 ERZV09D271 ERZV09D331 ERZV09D361 ERZV09D391 ERZV09D431 ERZV09D471 ERZV09D511 200(185 to 225) 220(198 to 242) 240(216 to264) 270(247 to 303) 330(297 to 363) 360(324 to 396) 390(351 to 429) 430(387 to 473) 470(423 to 517) 510(459 to 561) 130 140 150 175 210 230 250 275 300 320 170 180 200 225 270 300 320 350 385 410 340 360 395 455 545 595 650 710 775 845 Maximum peak current (8/20 μs) Maximum energy 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 35 39 42 49 58 65 70 80 85 92 → 25 *27.5 30 35 42 45 50 55 60 67 Capacitance (max.) at 1 kHz (pF) 16000* 11000* 8000 6300 5200 4600 3750 2800 2000 1700 1400 1100 Please click here 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 *430 *410 *380 *350 *300 *300 *300 *270 *230 *210 ✽Ip Measuring current of clamping voltage 180 to 680 : 5 A, 820 to 511 : 25 A Dimensions in mm (not to scale) W±1.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 H max. 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 Unit : mm L±1.0 1.3 1.4 1.5 1.7 1.7 1.8 1.9 2.2 1.6 1.8 2.0 2.2 ★The following part numbers, kindly also consider corresponding, smaller E Series devices with better performance for their size. → Please click here ERZV09D201 ERZV09D221 ERZV09D241 ERZV09D271 ERZV09D331 ERZV09D361 ERZV09D391 ERZV09D431 ERZV09D471 ERZV09D511 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 4.1 4.2 4.3 4.5 4.8 5.0 5.1 5.3 5.6 5.8 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 1.7 1.8 1.9 2.0 2.3 2.5 2.6 2.8 3.1 3.2 D T L W ø0.6 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. L T max. 3.8 4.0 4.2 4.5 4.0 4.2 4.4 4.5 3.8 3.9 4.1 4.4 H D max. 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 20.0 min. Part No. ERZV09D180 ERZV09D220 ERZV09D270 ERZV09D330 ERZV09D390 ERZV09D470 ERZV09D560 ERZV09D680 ERZV09D820 ERZV09D101 ERZV09D121 ERZV09D151 W 23-Dec-21 Varistors (ZNR Surge Absorber) Type D Typical Characteristics Voltage vs. Current Impulse Derating ERZV09D180 to ERZV09D680 ERZV09D180 to ERZV09D680 Max.Leakage Current 400 (Relation between impulse width and impulse current multiple) 1000 Max.Clamping Voltage 2 times：5 min. interval 680 up to 10 times：2 min. interval 560 up to 106 times : 10 sec. interval 470 300 390 200 330 270 100 100 90 80 70 60 Impulse Current（A) Voltage（V） 220 180 50 40 30 20 10 9 8 7 1 6 Test current waveform 5 10–6 to 10–3 A: Direct current 10–1 to 103 A: 8/20 μs 4 3 10 0.1 10-6 10-5 10-4 10-3 10-2 10-1 100 101 102 103 104 20 105 Current（A） 100 1000 10000 Impulse Width（μs） ERZV09D820 to ERZV09D511 ERZV09D820 to ERZV09D511 10000 Max.Leakage Current 2000 2 times：5 min. interval Max.Clamping Voltage up to 10 times：2 min. interval 471 431 391 361 1000 900 800 700 up to 106 times : 10 sec. interval 511 471 431 391 361 331 271 241 221 201 1000 500 151 400 121 Impulse Current（A) Voltage（V） 600 101 300 820 200 100 90 80 70 60 100 10 Test current waveform 50 10–6 to 10–3 A: Direct current 10–1 to 104 A: 8/20 μs 331 40 321 30 10-6 10-5 1 10-4 10-3 10-2 10-1 100 Current（A） 101 102 103 104 105 20 100 1000 10000 Impulse Width（μs） Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 23-Dec-21 Varistors (ZNR Surge Absorber) Type D 10 Series Ratings and characteristics ●Operating temperature range : ‒40 to 85 ℃　●Storage temperature range : ‒40 to 125 ℃ Part No. Varistor voltage Maximum allowable voltage Clamping voltage （max.） **lp Rated power Maximum peak current (8/20 μs) Maximum energy (10/1000 μs) (2 ms) (J) (J) （A） （A） 0.05 2.6 2.2 1000 500 16000* 0.05 3.2 2.6 1000 500 11000* **53 0.05 3.9 3.2 1000 500 8000 **65 0.05 4.8 4.0 1000 500 6300 Ｖ1 ｍＡ(Ｖ) AC rms (Ｖ) DC (Ｖ) (Ｖ) (W) ERZV10D180 18(16 to 20) **11 14 **36 ERZV10D220 22(20 to 24) **14 18 **43 ERZV10D270 27(24 to 30) **17 22 ERZV10D330 33(30 to 36) **20 26 1 time 2 times Capacitance (max.) at 1 kHz (pF) ERZV10D390 39(35 to 43) **25 31 **77 0.05 5.6 4.7 1000 500 5200 ERZV10D470 47(42 to 52) **30 38 **93 0.05 6.8 5.6 1000 500 4600 ERZV10D560 56(50 to 62) **35 45 *110 0.05 8.1 6.7 1000 500 3750 ERZV10D680 68(61 to 75) **40 56 *135 0.05 9.8 8.2 1000 500 2800 ERZV10D820 82(74 to 90) **50 65 *135 0.4* 14 10** 3500 2500 2000 ERZV10D101 100(90 to 110) **60 85 *165 0.4* 17 12** 3500 2500 1700 ERZV10D121 120(108 to 132) **75 100 *200 0.4* 20 14.5 3500 2500 1400 ERZV10D151 150(135 to 165) **95 125 *250 0.4* 25 18** 3500 2500 1100 ★The following part numbers, kindly also consider corresponding, smaller E Series devices with better performance for their size. → Please click here ERZV10D201 200(185 to 225) *130 170 *340 0.4* 35 25** 3500 2500 *430 ERZV10D221 220(198 to 242) *140 180 *360 0.4* 39 27.5 3500 2500 *410 ERZV10D241 240(216 to 264) *150 200 *395 0.4* 42 30** 3500 2500 *380 ERZV10D271 270(247 to 303) *175 225 *455 0.4* 49 35** 3500 2500 *350 ERZV10D331 330(297 to 363) *210 270 *545 0.4* 58 42** 3500 2500 *300 ERZV10D361 360(324 to 396) *230 300 *595 0.4* 65 45** 3500 2500 *300 ERZV10D391 390(351 to 429) *250 320 *650 0.4* 70 50** 3500 2500 *300 ERZV10D431 430(387 to 473) *275 350 *710 0.4* 80 55** 3500 2500 *270 ERZV10D471 470(423 to 517) *300 385 *775 0.4* 85 60** 3500 2500 *230 ERZV10D511 510(459 to 561) *320 410 *845 0.4* 92 67** 3500 2500 *210 ERZV10D561 560(504 to 616) *350 450 *930 0.4* 92 67** 3500 2500 *200 ERZV10D621 620(558 to 682) *385 505 1025 0.4* 92 67** 3500 2500 *190 ERZV10D681 680(612 to 748) *420 560 1120 0.4* 92 67** 3500 2500 *170 ERZV10D751 750(675 to 825) *460 615 1240 0.4* 100 70** 3500 2500 *160 ERZV10D821 820(738 to 902) *510 670 1355 0.4* 110 80** 3500 2500 *140 ERZV10D911 910(819 to 1001) *550 745 1500 0.4* 130 90** 3500 2500 *120 ERZV10D102 1000(900 to 1100) *625 825 1650 0.4* 140 100*** 3500 2500 *110 ERZV10D112 1100(990 to 1210) *680 895 1815 0.4* 155 110*** 3500 2500 *110 ERZV10D182CS 1800(1700 to 1980) 1000 1465 2970 0.4* 247 183*** 3500 2500 ***70✽ ✽Measured at 1 MHz　　　✽✽Ip Measuring current of clamping voltage 180 to 680 : 5 A, 820 to 182 : 25 A Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 23-Dec-21 Varistors (ZNR Surge Absorber) Type D Dimensions in mm (not to scale) Unit : mm L±1.0 1.3 1.4 1.5 1.7 1.6 1.7 1.8 2.0 1.6 1.8 2.0 2.3 D L W ★The following part numbers, kindly also consider corresponding, smaller E Series devices with better performance for their size. → Please click here ERZV10D201 ERZV10D221 ERZV10D241 ERZV10D271 ERZV10D331 ERZV10D361 ERZV10D391 ERZV10D431 ERZV10D471 ERZV10D511 ERZV10D561 ERZV10D621 ERZV10D681 ERZV10D751 ERZV10D821 ERZV10D911 ERZV10D102 ERZV10D112 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 4.8 4.9 5.0 5.2 5.5 5.7 5.8 6.0 6.2 6.4 6.7 7.1 7.4 7.8 8.1 8.6 9.1 9.7 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 1.9 2.0 2.1 2.3 2.6 2.8 2.9 3.1 3.3 3.5 3.8 4.2 4.5 4.9 5.2 5.7 6.2 6.8 ERZV10D182CS 13.5 14.4 11.0✽ 16.5 10.0 (±1.5) ✽ W2 T ø0.8 L H max. 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 W (ERZV10D182CS) D T H L W±1.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 H T max. 4.6 4.7 4.8 5.0 4.9 5.0 5.1 5.3 4.5 4.7 4.9 5.2 20.0 min. D max. 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 4.0±1.5 Part No. ERZV10D180 ERZV10D220 ERZV10D270 ERZV10D330 ERZV10D390 ERZV10D470 ERZV10D560 ERZV10D680 ERZV10D820 ERZV10D101 ERZV10D121 ERZV10D151 ø0.8 L Typical Characteristics Voltage vs. Current Impulse Derating ERZV10D180 to ERZV10D680 400 ERZV10D180 to ERZV10D680 390 330 200 Impulse Current（A) 220 Voltage（V） up to 10 times:2 min. interval 100 270 180 100 90 80 70 60 50 2 times：5 min. interval 1000 680 560 470 Max.Clamping Voltage Max.Leakage Current 300 (Relation between impulse width and impulse current multiple) 40 30 10 1 20 0.1 10 9 8 7 6 100 1000 10000 Impulse Width（μs） Test current waveform 5 10–6 to 10–3 A: Direct current 10–1 to 103 A: 8/20 μs 4 3 20 10-6 10-5 10-4 10-3 10-2 10-1 100 101 102 103 104 105 Current（A） Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 23-Dec-21 Varistors (ZNR Surge Absorber) Type D Typical Characteristics Voltage vs. Current Impulse Derating ERZV10D820 to ERZV10D511 ERZV10D820 to ERZV10D511 10000 Max.Leakage Current up to 10 times：2 min. interval 800 700 up to 106 times : 10 sec. interval 511 471 431 391 361 331 271 241 221 201 471 431 391 361 1000 900 1000 600 Voltage（V） 2 times：5 min. interval Max.Clamping Voltage Impulse Current（A) 2000 (Relation between impulse width and impulse current multiple) 500 151 400 121 101 300 100 10 820 200 1 20 1000 100 10000 Impulse Width（μs） 100 ERZV10D561 to ERZV10D112 90 80 70 60 10000 up to 106 times : 10 sec. interval Test current waveform 50 10–3 to A: Direct current 10–1 to 104 A: 8/20 μs 331 321 10-6 10-5 10-4 10-3 10-2 10-1 100 101 102 103 104 1000 105 Current（A） ERZV10D561 to ERZV10D182CS 5000 Max.Leakage Current Max.Clamping Voltage 102 911 821 112 102 911 821 751 681 621 2000 1 20 100 10000 1000 Impulse Width（μs） ERZV10D182CS 561 10000 2 times：5 min. interval up to 10 times：2 min. interval up to 106 times : 10 sec. interval 1000 900 1000 Impulse Current（A) Voltage（V） 100 10 182CS 4000 3000 Impulse Current（A) 10–6 40 30 2 times：5 min. interval up to 10 times：2 min. interval 800 700 600 500 400 300 200 751 681 621 10-6 10-5 100 10 Test current waveform 10–6 to 10–3 A: Direct current 10–1 to 104 A: 8/20 μs 10-4 10-3 10-2 10-1 Current（A） 100 101 102 103 104 105 1 20 100 1000 10000 Impulse Width（μs） Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 23-Dec-21 Varistors (ZNR Surge Absorber) Type D 14 Series Ratings and characteristics ●Operating temperature range : ‒40 to 85 ℃　●Storage temperature range : ‒40 to 125 ℃ Part No. Varistor voltage Ｖ1 ｍＡ(Ｖ) Maximum allowable voltage AC rms (Ｖ) DC (Ｖ) Clamping voltage （max.） **lp Rated power (Ｖ) (W) Maximum peak current (8/20 μs) Maximum energy (10/1000 μs) (2 ms) 1 time 2 times (J) (J) （A） （A） Capacitance (max.) at 1 kHz (pF) ERZV14D180 18(16 to 20) **11 14 **36 0.1 5.2 4.3 2000 1000 25000 ERZV14D220 22(20 to 24) **14 18 **43 0.1 6.3 5.3 2000 1000 20000 ERZV14D270 27(24 to 30) **17 22 **53 0.1 7.8 6.5 2000 1000 16000 ERZV14D330 33(30 to 36) **20 26 **65 0.1 9.5 7.9 2000 1000 12200 ERZV14D390 39(35 to 43) **25 31 **77 0.1 11 9.4 2000 1000 *7000 ERZV14D470 47(42 to 52) **30 38 **93 0.1 14 11** 2000 1000 *6750 ERZV14D560 56(50 to 62) **35 45 *110 0.1 16 13** 2000 1000 *6500 ERZV14D680 68(61 to 75) **40 56 *135 0.1 20 16** 2000 1000 *5500 ERZV14D820 82(74 to 90) **50 65 *135 0.6 28 20** 6000 5000 *3700 ERZV14D101 100(90 to 110) **60 85 *165 0.6 35 25** 6000 5000 *3200 ERZV14D121 120(108 to 132) **75 100 *200 0.6 42 30** 6000 5000 *2700 ERZV14D151 150(135 to 165) **95 125 *250 0.6 53 37.5 6000 5000 *2200 ★The following part numbers, kindly also consider corresponding, smaller E Series devices with better performance for their size. → Please click here ERZV14D201 200(185 to 225) *130 170 *340 0.6 70 50** 6000 5000 **770 ERZV14D221 220(198 to 242) *140 180 *360 0.6 78 55** 6000 5000 **740 ERZV14D241 240(216 to 264) *150 200 *395 0.6 84 60** 6000 5000 **700 ERZV14D271 270(247 to 303) *175 225 *455 0.6 99 70** 6000 5000 **640 ERZV14D331 330(297 to 363) *210 270 *545 0.6 115 80** 6000 4500 **580 ERZV14D361 360(324 to 396) *230 300 *595 0.6 130 90** 6000 4500 **540 ERZV14D391 390(351 to 429) *250 320 *650 0.6 140 100** 6000 4500 **500 ERZV14D431 430(387 to 473) *275 350 *710 0.6 155 110** 6000 4500 **450 ERZV14D471 470(423 to 517) *300 385 *775 0.6 175 125** 6000 4500 **400 ERZV14D511 510(459 to 561) *320 410 *845 0.6 190 136** 6000 4500 **350 ERZV14D561 560(504 to 616) *350 450 *930 0.6 190 136** 5000 4500 **340 ERZV14D621 620(558 to 682) *385 505 1025 0.6 190 136** 5000 4500 **330 ERZV14D681 680(612 to 748) *420 560 1120 0.6 190 136** 5000 4500 **320 ERZV14D751 750(675 to 825) *460 615 1240 0.6 210 150** 5000 4500 **310 ERZV14D821 820(738 to 902) *510 670 1355 0.6 235 165** 5000 4500 **280 ERZV14D911 910(819 to 1001) *550 745 1500 0.6 255 180** 5000 4500 **250 ERZV14D102 1000(900 to 1100) *625 825 1650 0.6 280 200** 5000 4500 **230 ERZV14D112 1100(990 to 1210) *680 895 1815 0.6 310 220** 5000 4500 **210 ERZV14D182CS 1800(1700 to 1980) 1000 1465 2970 0.6 510 360** 5000 4500 **120 ✽Ip Measuring current of clamping voltage 180 to 680 : 10 A, 820 to 182 : 50 A Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 23-Dec-21 Varistors (ZNR Surge Absorber) Type D Dimensions in mm (not to scale) Unit : mm L±1.0 1.3 1.4 1.5 1.7 1.6 1.7 1.8 2.0 1.6 1.8 2.0 2.3 D L L W ★The following part numbers, kindly also consider corresponding, smaller E Series devices with better performance for their size. → Please click here ø0.8 ERZV14D201 ERZV14D221 ERZV14D241 ERZV14D271 ERZV14D331 ERZV14D361 ERZV14D391 ERZV14D431 ERZV14D471 ERZV14D511 ERZV14D561 ERZV14D621 ERZV14D681 ERZV14D751 ERZV14D821 ERZV14D911 ERZV14D102 ERZV14D112 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 4.8 4.9 5.0 5.2 5.5 5.7 5.8 6.0 6.2 6.4 6.7 7.1 7.4 7.8 8.1 8.6 9.1 9.7 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 19.0 19.0 19.0 19.0 19.0 19.0 19.0 19.0 1.9 2.0 2.1 2.3 2.6 2.8 2.9 3.1 3.3 3.5 3.8 4.2 4.5 4.9 5.2 5.7 6.2 6.8 ERZV14D182CS 17.0 14.4* 15.0✽ 20.5 10.5 (±2.0) ✽：W2 T W (ERZV14D182CS) D T H L H max. 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 H W±1.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 min. T max. 4.6 4.7 4.8 5.0 4.9 5.0 5.1 5.3 4.5 4.7 4.9 5.2 20.0 D max. 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 4.0±1.5 Part No. ERZV14D180 ERZV14D220 ERZV14D270 ERZV14D330 ERZV14D390 ERZV14D470 ERZV14D560 ERZV14D680 ERZV14D820 ERZV14D101 ERZV14D121 ERZV14D151 ø0.8 L Typical Characteristics Voltage vs. Current Impulse Derating (Relation between impulse width and impulse current multiple) ERZV14D180 to ERZV14D680 ERZV14D180 to ERZV14D680 10000 Max.Clamping Voltage Max.Leakage Current 300 up to 106 times : 10 sec. interval 390 330 Impulse Current（A) Voltage（V） up to 10 times：2 min. interval 470 200 270 220 470 100 90 80 70 60 50 2 times：5 min. interval 680 560 400 180 40 1000 100 10 30 20 1 10 9 8 7 6 100 1000 Impulse Width（μs） 10000 Test current waveform 5 10–6 to 10–3 A: Direct current 10–1 to 104 A: 8/20 μs 4 3 20 10-6 10-5 10-4 10-3 10-2 10-1 100 101 102 103 104 105 Current（A） Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 23-Dec-21 Varistors (ZNR Surge Absorber) Type D Typical Characteristics Voltage vs. Current Impulse Derating ERZV14D820 to ERZV14D511 ERZV14D820 to ERZV14D511 10000 1000 900 800 Max.Leakage Current Max.Clamping Voltage 471 431 391 361 up to 106 times : 10 sec. interval 1000 700 Voltage（V） 600 151 121 500 101 820 400 2 times：5 min. interval up to 10 times：2 min. interval 511 471 431 391 361 331 271 241 221 201 Impulse Current（A) 2000 (Relation between impulse width and impulse current multiple) 100 10 300 200 1 20 100 1000 10000 Impulse Width（μs） ERZV14D561 to ERZV14D112 100 90 80 70 60 10000 up to 106 times : 10 sec. interval 50 30 10-6 Test current waveform 10–6 to 10–3 A: Direct current 10–1 to 104 A: 8/20 μs 331 321 10-5 10-4 10-3 10-2 10-1 100 101 102 103 104 1000 105 Current（A） ERZV14D561 to ERZV14D182CS 5000 Max.Clamping Voltage Max.Leakage Current 4000 182CS 102 911 821 3000 Impulse Current（A) 40 112 102 911 821 2000 100 10 1 20 100 1000 10000 Impulse Width（μs） 751 681 ERZV14D182CS 621 561 10000 2 times：5 min. interval up to 10 times：2 min. interval up to 106 times : 10 sec. interval 1000 900 1000 800 Impulse Current（A) Voltage（V） 2 times：5 min. interval up to 10 times：2 min. interval 700 600 500 400 300 10-6 10-5 10 Test current waveform 751 681 621 200 100 10–6 to 10–3 A: Direct current 10–1 to 104 A: 8/20 μs 1 10-4 10-3 10-2 10-1 Current（A） 100 101 102 103 104 105 20 100 1000 10000 Impulse Width（μs） Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 23-Dec-21 Varistors (ZNR Surge Absorber) Type D 20 Series Ratings and characteristics ●Operating temperature range : ‒40 to 85 ℃　●Storage temperature range : ‒40 to 125 ℃ Part No. Varistor voltage Maximum allowable voltage Clamping voltage （max.） **lp Rated power (Ｖ) (W) Maximum peak current (8/20 μs) Maximum energy (10/1000 μs) (2 ms) (J) (J) （A） （A） **13 12 3000 2000 40000 0.2 **16 14 3000 2000 30000 0.2 **19 17 3000 2000 24500 **65 0.2 **24 21 3000 2000 20000 31 **77 0.2 **28 25 3000 2000 13800 38 **93 0.2 **34 30 3000 2000 13500 **35 45 *110 0.2 **41 36 3000 2000 12200 **40 56 *135 0.2 **49 44 3000 2000 11500 82(74 to 90) **50 65 *135 1.0 **56 40 10000 7000 *7500 100(90 to 110) **60 85 *165 1.0 **70 50 10000 7000 *6500 120(108 to 132) **75 100 *200 1.0 **85 60 10000 7000 *5500 150(135 to 165) **95 125 *250 1.0 *106 75 10000 7000 *4500 Ｖ1 ｍＡ(Ｖ) AC rms (Ｖ) DC (Ｖ) ERZV20D180 18(16 to 20) **11 14 **36 0.2 ERZV20D220 22(20 to 24) **14 18 **43 ERZV20D270 27(24 to 30) **17 22 **53 ERZV20D330 33(30 to 36) **20 26 ERZV20D390 39(35 to 43) **25 ERZV20D470 47(42 to 52) **30 ERZV20D560 56(50 to 62) ERZV20D680 68(61 to 75) ERZV20D820 ERZV20D101 ERZV20D121 ERZV20D151 ★The following part numbers, kindly also consider corresponding, smaller E Series devices with better performance for their size. → 1 time 2 times Capacitance (max.) at 1 kHz (pF) Please click here ERZV20D201 200(185 to 225) *130 170 *340 1.0 *140 100 10000 7000 *1700 ERZV20D221 220(198 to 242) *140 180 *360 1.0 *155 110 10000 7000 *1600 ERZV20D241 240(216 to 264) *150 200 *395 1.0 *168 120 10000 7000 *1500 ERZV20D271 270(247 to 303) *175 225 *455 1.0 *190 135 10000 7000 *1300 ERZV20D331 330(297 to 363) *210 270 *545 1.0 *228 160 10000 6500 *1100 ERZV20D361 360(324 to 396) *230 300 *595 1.0 *255 180 10000 6500 *1100 ERZV20D391 390(351 to 429) *250 320 *650 1.0 *275 195 10000 6500 *1100 ERZV20D431 430(387 to 473) *275 350 *710 1.0 *303 215 10000 6500 *1000 ERZV20D471 470(423 to 517) *300 385 *775 1.0 *350 250 10000 6500 **900 ERZV20D511 510(459 to 561) *320 410 *845 1.0 *382 273 10000 6500 **800 ERZV20D561 560(504 to 616) *350 450 *930 1.0 *382 273 *7500 6500 **750 ERZV20D621 620(558 to 682) *385 505 1025 1.0 *382 273 *7500 6500 **700 ERZV20D681 680(612 to 748) *420 560 1120 1.0 *382 273 *7500 6500 **650 ERZV20D751 750(675 to 825) *460 615 1240 1.0 *420 300 *7500 6500 **600 ERZV20D821 820(738 to 902) *510 670 1355 1.0 *460 325 *7500 6500 **530 ERZV20D911 910(819 to 1001) *550 745 1500 1.0 *510 360 *7500 6500 **500 ERZV20D102 1000(900 to 1100) *625 825 1650 1.0 *565 400 *7500 6500 **450 ERZV20D112 1100(990 to 1210) *680 895 1815 1.0 *620 440 *7500 6500 **400 1000 1465 2970 1.0 1020 720 *7500 6500 **250 ERZV20D182 1800(1700 to 1980) ✽Ip Measuring current of clamping voltage 180 to 680 : 20 A, 820 to 182 : 100 A Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 23-Dec-21 Varistors (ZNR Surge Absorber) Type D Dimensions in mm (not to scale) 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 1.5 1.6 1.7 1.9 1.9 2.0 2.1 2.2 1.8 2.0 2.2 2.5 D T L L 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 L±1.0 W ø1.0 ★The following part numbers, kindly also consider corresponding, smaller E Series devices with better performance for their size. → Please click here ERZV20D201 ERZV20D221 ERZV20D241 ERZV20D271 ERZV20D331 ERZV20D361 ERZV20D391 ERZV20D431 ERZV20D471 ERZV20D511 ERZV20D561 ERZV20D621 ERZV20D681 ERZV20D751 ERZV20D821 ERZV20D911 ERZV20D102 ERZV20D112 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 5.2 5.3 5.4 5.6 5.9 6.1 6.2 6.4 6.6 6.8 7.1 7.5 7.8 8.2 8.5 9.0 9.5 10.1 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 25.5 25.5 25.5 25.5 25.5 25.5 25.5 25.5 2.1 2.2 2.3 2.5 2.8 3.0 3.1 3.3 3.5 3.7 4.2 4.4 4.7 5.1 5.4 5.9 6.4 7.0 ERZV20D182 ✽：W2 23.5 14.8 　15.0✽ 28.0 10.7 (±2.0) W (ERZV20D182) D H T L 5.1 5.2 5.3 5.5 5.5 5.6 5.7 5.8 4.9 5.1 5.3 5.6 Unit : mm H max. H W±1.0 min. 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 T max. 20.0 D max. L 20.0 min Part No. ERZV20D180 ERZV20D220 ERZV20D270 ERZV20D330 ERZV20D390 ERZV20D470 ERZV20D560 ERZV20D680 ERZV20D820 ERZV20D101 ERZV20D121 ERZV20D151 ø1.0 Typical Characteristics Voltage vs. Current Impulse Derating (Relation between impulse width and impulse current multiple) ERZV20D180 to ERZV20D680 400 ERZV20D180 to ERZV20D680 Max.Leakage Current 300 10000 680 Max.Clamping Voltage 200 up to 106 times : 10 sec. interval 330 1000 Impulse Current（A) 270 Voltage（V） 2 times：5 min. interval up to 10 times：2 min. interval 560 470 390 220 100 90 80 70 60 50 180 40 30 100 10 20 1 20 10 9 8 7 6 1000 10000 Test current waveform 5 10–6 to 10–3 A: Direct current 10–1 to 104 A: 8/20 μs 4 3 100 Impulse Width（μs） 10-6 10-5 10-4 10-3 10-2 10-1 100 101 102 103 104 105 Current (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 23-Dec-21 Varistors (ZNR Surge Absorber) Type D Typical Characteristics Voltage vs. Current Impulse Derating ERZV20D820 to ERZV20D511 ERZV20D820 to ERZV20D511 10000 Max.Leakage Current 361 up to 106 times : 10 sec. interval 1000 241 221 201 600 Voltage（V） up to 10 times：2 min. interval 511 471 431 391 361 331 271 471 431 391 1000 900 800 700 2 times：5 min. interval Max.Clamping Voltage Impulse Current（A) 2000 151 500 121 400 101 820 300 200 100 10 1 20 100 1000 10000 Impulse Width（μs） 100 ERZV20D561 to ERZV20D112 90 80 10000 2 times：5 min. interval 70 60 up to 10 times：2 min. interval Test current waveform 40 up to 106 times : 10 sec. interval 10–6 to 10–3 A: Direct current 10–1 to 104 A: 8/20 μs 241 331 221 1000 30 10-6 10-5 10-4 10-3 10-2 10-1 100 101 102 103 104 105 Current（A） ERZV20D561 to ERZV20D182 5000 Max.Leakage Current Max.Clamping Voltage 182 Impulse Current（A) 50 4000 102 911 821 3000 112 102 911 821 100 10 1 751 681 621 561 2000 20 100 1000 10000 Impulse Width（μs） ERZV20D182 10000 2 times：5 min. interval up to 10 times：2 min. interval up to 106 times : 10 sec. interval 1000 900 1000 800 Impulse Current（A) Voltage（V） (Relation between impulse width and impulse current multiple) 700 600 500 400 300 10–6 to 10–3 A: Direct current 10–1 to 104 A: 8/20 μs 200 10-5 10 Test current waveform 751 681 621 10-6 100 10-4 10-3 10-2 10-1 Current（A） 100 101 102 103 104 105 1 20 100 1000 10000 Impulse Width（μs） Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 23-Dec-21 Varistors (ZNR Surge Absorber) Type D Straight Leads Cut Type (Bulk Type) Ratings and characteristics ※Refer to bulk standard type. Dimensions in mm (not to scale) D W B H T** ød L* notes ✽ Dimension “L”: Conforms to each individtual specification. 　　 ✽✽ Dimension “T”: Conforms to each individual specification. Unit : mm Series Varister Voltage Symbol D H W øｄ B 5 7 9 180 to 471 180 to 511 180 to 511 180 to 511 561 to 751 821 to 112 180 to 511 561 to 751 821 to 112 7.0 max. 10.0 max. 5.0±1.0 8.5 max. 11.5 max. 5.0±1.0 11.5max. 14.0max. 5.0±1.0 11.5max. 14.5max. 7.5±1.0 12.5max. 15.5max. 7.5±1.0 12.5max. 15.5max. 7.5±1.0 15.5 max. 18.5 max. 7.5±1.0 16.0max. 19.0max. 7.5±1.0 16.0max. 19.0max. 7.5±1.0 0.60 Standard Products Part No. +0.06 0.60 -0.05 +0.06 0.60 -0.05 10 +0.06 -0.05 0.80 +0.08 0.80 -0.05 14 +0.08 -0.05 0.80 +0.08 -0.05 0.80 +0.08 -0.05 0.80 +0.08 -0.05 0.80 +0.08 -0.05 4.0±1.0 4.0±1.0 4.0±1.0 4.0±1.0 4.0±1.0 4.0±1.5 4.0±1.0 4.0±1.0 4.0±1.5 ERZV05D□□□CS ERZV07D□□□CS ERZV09D□□□CS ERZV10D□□□CS ERZV10D□□□CS ERZV10D□□□C1 ERZV14D□□□CS ERZV14D□□□CS ERZV14D□□□C1 Crimped Leads Cut Type (Bulk Type) Ratings and Characteristics ※Refer to bulk standard type. Dimensions in mm (not to scale) D A T** *** C ød B C L* W notes ✽ Dimension “L”: Conforms to each individtual specification. 　　 ✽✽ Dimension “T”: Conforms to each individual specification. 　 ✽✽✽ Resin extenyions : No resin below the center of the hook. Unit : mm Series Varister Voltage Symbol A D C W øｄ B Standard Products Part No. 5 7 9 180 to 471 180 to 511 180 to 511 180 to 511 561 to 751 821 to 112 180 to 511 561 to 751 821 to 112 13.0 max. 7.0 max. 1.2±0.4 5.0±1.0 14.5 max. 8.5 max. 1.2±0.4 5.0±1.0 17.5 max. 11.5max. 1.2±0.4 5.0±1.0 17.5 max. 11.5max. 1.4±0.4 7.5±1.0 19.0 max. 12.5max. 1.4±0.4 7.5±1.0 20.0 max. 12.5max. 1.4±0.4 7.5±1.0 21.0 max. 15.5 max. 1.4±0.4 7.5±1.0 22.0 max. 16.0max. 1.4±0.4 7.5±1.0 23.5 max. 16.0max. 1.4±0.4 7.5±1.0 0.60 +0.06 -0.05 0.60 +0.06 -0.05 0.60 10 +0.06 -0.05 0.80 +0.08 -0.05 0.80 14 +0.08 -0.05 0.80 +0.08 -0.05 0.80 +0.08 -0.05 0.80 +0.08 -0.05 0.80 +0.08 -0.05 4.0±1.0 4.0±1.0 4.0±1.0 4.0±1.0 4.0±1.0 4.0±1.5 4.0±1.0 4.0±1.0 4.0±1.5 ERZV05V□□□CS ERZV07V□□□CS ERZV09V□□□CS ERZV10V□□□CS ERZV10V□□□CS ERZV10V□□□C1 ERZV14V□□□CS ERZV14V□□□CS ERZV14V□□□C1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 23-Dec-21 Varistors (ZNR Surge Absorber) Type D Taping Specifications for Automated Assembly (Straight Leads and Taping) Ratings and characteristics ※Refer to bulk standard type. Dimensions in mm (not to scale) TypeⅠ・Ⅱ P △h øD T* A P2 F1 H0 H W1 L W0 W2 P1 Position of H0 dimension F P0 Position of F1 dimension øD0 t ød ✽ Dimension “T”: Conforms to each individual specification. P2 P △h øD T* A TypeⅢ・Ⅳ F F1 H0 H W1 L W0 W2 P1 Position of H0 dimension ød P0 Position of F1 dimension t øD0 ✽ Dimension “T”: Conforms to each individual specification. Series 5 7 9 Varister Voltage 180 to 471 TypeⅠ 180 to 511 TypeⅠ 180 to 511 TypeⅠ 12.7±1.0 12.7±1.0 P0 12.7±0.3 12.7±0.3 P1 3.85±0.70 P2 6.35±1.30 +0.06 Type Symbol P Unit : mm 10 14 180 to 331 TypeⅠ 361 to 511 TypeⅡ 561 to 112 TypeⅡ 180 to 331 type Ⅲ 361 to 511 Type Ⅳ 12.7±1.0 15.0±1.0 15.0±1.0 15.0±1.0 30.0±1.0 30.0±1.0 30.0±1.0 12.7±0.3 15.0±0.3 15.0±0.3 15.0±0.3 15.0±0.3 15.0±0.3 15.0±0.3 3.85±0.70 3.85±0.70 3.75±0.70 3.75±0.70 3.75±0.70 3.75±0.70 3.75±0.70 3.75±0.70 6.35±1.30 6.35±1.30 7.5±1.3 7.5±1.3 7.5±1.3 7.5±1.3 7.5±1.3 7.5±1.3 +0.06 +0.06 +0.08 +0.08 +0.08 +0.08 +0.08 561 to 112 Type Ⅳ +0.08 øｄ 0.60 F △ｈ 5.0±0.5 5.0±0.5 5.0±0.5 7.5±0.5 7.5±0.5 7.5±0.5 7.5±0.5 7.5±0.5 7.5±0.5 0±2 0±2 0±2 0±2 0±2 0±2 0±2 0±2 0±2 -0.05 +1.0 0.60 -0.05 +1.0 0.60 -0.05 +1.0 0.80 -0.05 +1.0 0.80 -0.05 +1.0 0.80 -0.05 +1.0 0.80 -0.05 +1.0 0.80 -0.05 +1.0 0.80 -0.05 +1.0 W 18.0 W0 W1 W2 H 5.0 min. 5.0 min. 5.0 min. 5.0 min. 5.0 min. 5.0 min. 5.0 min. 5.0 min. 5.0 min. 9.0±0.5 9.0±0.5 9.0±0.5 9.0±0.5 9.0±0.5 9.0±0.5 9.0±0.5 9.0±0.5 9.0±0.5 3 max. 3 max. 3 max. 3 max. 3 max. 3 max. 3 max. 3 max. 3 max. Approx. 20 Approx. 20 Approx. 20 Approx. 22 Approx. 22 Approx. 22 Approx. 22 Approx. 22 Approx. 22 H0 17.0±0.5 17.0±0.5 17.0±0.5 ―― ―― ―― ―― -0.5 18.0 -0.5 18.0 -0.5 18.0 18.0 -0.5 +2.0 0 F1 ―― ―― ―― ―― øD0 t L øD A ø4.0±0.2 ø4.0±0.2 ø4.0±0.2 ø4.0±0.2 Standard Products Part No. 18.0 16.00 -0.5 +0.75 -0.5 ø4.0±0.2 18.0 16.00 -0.5 +0.75 -0.5 ø4.0±0.2 18.0 18.0 -0.5 +2.0 0 ―― ø4.0±0.2 18.0 16.00 -0.5 +0.75 -0.5 ø4.0±0.2 18.0 16.00 -0.5 +0.75 -0.5 ø4.0±0.2 0.6±0.3 0.6±0.3 0.6±0.3 0.6±0.3 0.6±0.3 0.6±0.3 0.6±0.3 0.6±0.3 0.6±0.3 11 max. 11 max. 11 max. 11 max. 11 max. 11 max. 11 max. 11 max. 11 max. 7.0 max. 8.5 max. 11.5 max. 11.5 max. 11.5 max. 12.5 max. 15.5 max. 15.5 max. 16.0 max. 10.0 max. 11.5 max. 14.0 max. 14.5 max. 14.5 max. 15.5 max. 18.5 max. 18.5 max. 19.0 max. 　ERZVA5D□□□ 　ERZVA7D□□□ 　ERZVA9D□□□ 　ERZVGAD□□□ 　ERZVGAD□□□ 　ERZVGAD□□□ 　ERZVGED□□□ 　ERZVGED□□□ 　ERZVGED□□□ Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 23-Dec-21 Varistors (ZNR Surge Absorber) Type D Taping Specifications for Automated Assembly (Crimped Leads and Taping) Ratings and characteristics ※Refer to bulk standard type. Dimensions in mm (not to scale) TypeⅠ P △h øD T* H0 W W1 L W0 W2 P1 H A P2 F ød øD0 t P0 ✽ Dimension “T”: Conforms to each individual specification. P2 T* H W F W1 L W0 W2 P1 H0 A TypeⅡ △h øD P ød t øD0 P0 ✽ Dimension “T”: Conforms to each individual specification. Series Varister Voltage Type Symbol P P0 P1 P2 5 180 to 471 TypeⅠ 12.7±1.0 180 to 331 TypeⅠ 15.0±1.0 10 361 to 511 TypeⅠ 15.0±1.0 561 to 112 TypeⅠ 15.0±1.0 180 to 331 TypeⅡ 30.0±1.0 14 361 to 511 TypeⅡ 30.0±1.0 561 to 112 TypeⅡ 30.0±1.0 12.7±0.3 12.7±0.3 12.7±0.3 15.0±0.3 15.0±0.3 15.0±0.3 15.0±0.3 15.0±0.3 15.0±0.3 3.85±0.70 3.85±0.70 3.75±0.70 3.75±0.70 3.75±0.70 3.75±0.70 3.75±0.70 3.75±0.70 6.35±1.30 6.35±1.30 6.35±1.30 7.5±1.3 7.5±1.3 7.5±1.3 7.5±1.3 7.5±1.3 7.5±1.3 +0.06 0.60 F △ｈ W W0 W1 W2 H H0 øD0 t L øD A 5.0±0.5 Products Part No. 9 180 to 511 TypeⅠ 12.7±1.0 3.85±0.70 øｄ Standard 7 180 to 511 TypeⅠ 12.7±1.0 Unit : mm 0±2 18.0 -0.05 +1.0 -0.5 0.60 +0.06 -0.05 5.0±0.5 0±2 18.0 +1.0 -0.5 0.60 +0.06 -0.05 5.0±0.5 0±2 18.0 +1.0 -0.5 0.80 +0.08 -0.05 7.5±0.5 0±2 18.0 +1.0 -0.5 0.80 +0.08 -0.05 7.5±0.5 0±2 18.0 +1.0 -0.5 0.80 +0.08 -0.05 7.5±0.5 0±2 18.0 +1.0 -0.5 0.80 +0.08 -0.05 7.5±0.5 0±2 18.0 +1.0 -0.5 0.80 +0.08 -0.05 7.5±0.5 0±2 18.0 +1.0 -0.5 0.80 +0.08 -0.05 7.5±0.5 0±2 18.0 +1.0 -0.5 5.0 min. 5.0 min. 5.0 min. 5.0 min. 5.0 min. 5.0 min. 5.0 min. 5.0 min. 5.0 min. 9.0±0.5 9.0±0.5 9.0±0.5 9.0±0.5 9.0±0.5 9.0±0.5 9.0±0.5 9.0±0.5 9.0±0.5 3 max. 3 max. 3 max. 3 max. 3 max. 3 max. 3 max. 3 max. 3 max. Approx. 22 Approx. 22 Approx. 22 Approx. 22 Approx. 22 Approx. 22 Approx. 22 Approx. 22 Approx. 22 17.0±0.5 17.0±0.5 17.0±0.5 16.0±0.5 16.0±0.5 16.0±0.5 16.0±0.5 16.0±0.5 16.0±0.5 ø4.0±0.2 ø4.0±0.2 ø4.0±0.2 ø4.0±0.2 ø4.0±0.2 ø4.0±0.2 ø4.0±0.2 ø4.0±0.2 ø4.0±0.2 0.6±0.3 0.6±0.3 0.6±0.3 0.6±0.3 0.6±0.3 0.6±0.3 0.6±0.3 0.6±0.3 0.6±0.3 11 max. 11 max. 11 max. 11 max. 11 max. 11 max. 11 max. 11 max. 11 max. 7.0 max. 8.5 max. 11.5 max. 11.5 max. 11.5 max. 12.5 max. 15.5 max. 15.5 max. 16.0 max. 13.0 max. 14.5 max. 17.5 max. 17.5 max. 17.5 max. ＊(refer) 21.0 max. 21.0 max. ＊(refer) 　ERZVA5V□□□ 　ERZVA7V□□□ 　ERZVA9V□□□ 　ERZVEAV□□□ 　ERZVEAV□□□ 　ERZVEEV□□□ 　ERZVEEV□□□ ✽Dimension "A" ERZV□□V561 ERZV□□V621 ERZV□□V681 ERZV□□V751 10 Series 19.0 max. 19.0 max. 19.0 max. 19.0 max. 14 Series 22.0 max. 22.0 max. 22.0 max. 22.0 max. ERZV□□V821 ERZV□□V911 ERZV□□V102 ERZV□□V112 　ERZVEAV□□□ 10 Series 20.0 max. 20.0 max. 20.0 max. 20.0 max. 　ERZVEEV□□□ 14 Series 23.5 max. 23.5 max. 23.5 max. 23.5 max. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 23-Dec-21 Varistors (ZNR Surge Absorber) Type D Application Note for Safety Standards ● Approvals products lists in "Reference Guide to Standard Products." ● UL, VDE and CSA : Registered in "Type name", it isn’t registered in "Panasonic Part No." ● CQC : Registered in "Panasonic Part No." ● "Rated Voltages" are specified for UL recognized components in list shown below. ■The AC Rated Voltage and Maximum Allowable Voltage Type Name Maximum Allowable Voltage Rated Voltage (Vrms) ACrms (V) DC (V) UL1449 CSA C22.2 No.269.5 V✽820U *50 *65 *45 N/A V✽101U *60 *85 *55 N/A V✽121U *75 100 *68 N/A V✽151U *95 125 *86 N/A V✽201U 130 170 118 118 V✽221U 140 180 127 127 V✽241U 150 200 136 136 V✽271U 175 225 159 159 V✽331U 210 270 189 189 V✽361U 230 300 209 209 V✽391U 250 320 227 227 V✽431U 275 350 250 250 V✽471U 300 385 272 272 V✽511U 320 410 291 291 V✽561U 350 450 320 320 V✽621U 385 505 350 350 V✽681U 420 560 381 381 V✽751U 460 615 418 418 V✽821U 510 670 463 463 V✽911U 550 745 500 500 V✽102U 625 825 568 568 V✽112U 680 895 600 618 V✽182U 1000* 1465* 600 909 ✽：5 Series is blank, 7 series is 7, 9 series is 9, 10 series is 10, 14 series is 14, 20 series is 20 　 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 23-Dec-21 Guidelines and precautions regarding the technical information and use of our products described in this online catalog. ■ If you want to use our products described in this online catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially cause personal injury (e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety equipment), it is necessary to verify whether the specifications of our products fit to such applications. Please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. ■ The quality and performance of our products as described in this online catalog only apply to our products when used in isolation. Therefore, please ensure you evaluate and verify our products under the specific circumstances in which our products are assembled in your own products and in which our products will actually be used. ■ If you use our products in equipment that requires a high degree of reliability, regardless of the application, it is recommended that you set up protection circuits and redundancy circuits in order to ensure safety of your equipment. ■ The products and product specifications described in this online catalog are subject to change for improvement without prior notice. Therefore, please be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, purchase, or use our products. ■ The technical information in this online catalog provides examples of our products' typical operations and application circuits. We do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. ■ If any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and export control, shall be observed. ■ The switchover date for compliance with the RoHS Directive/REACH Regulations varies depending on the part number or series of our products. ■ When you use the inventory of our products for which it is unclear whether those products are compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the website inquiry form and contact us. We do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. 01-Oct-19 Varistors (ZNR Surge Absorber) Varistors (ZNR Surge Absorber) Type D, Series V Varistors (ZNR Surge Absorber) Type SMD, Series HF, VF Handling Precautions Safety Precautions In case that a Varistors (ZNR Surge Absorber) (hereafter referred to as the ZNR, or product name) is used, if an abnormality takes place because of peripheral conditions of the ZNR(material, environments, power source conditions, circuit conditions, etc. in equipment design), fire, electric shock, burn, or product failure may be occur. The precautions for this product are described below, understand the content thoroughly before usage. For more questions, contact us. If there's any uncertainty/doubt/products safety items, please contact us. When a dogma shall be occurred about safety for this products, be sure to inform us rapidly, operate your technical examination. 1. Precautions to be strictly observed 1.1 Confirmation of performance ratings Use the ZNR within its rated range of performance such as the Max. allowable voltage, withstanding surge current, withstanding energy, impulse life(surge life), average pulse power, and operating temperature range. If used outside the range, the ZNR can be degrade and have element fracture, which may result in smoking and ignition. 1.2 To avoid accidents due to unexpected phenomena, take the following measures 1) In the event of fracture of the ZNR, its pieces may scatter ; hence, put the case or cover of the set product in place. 2) Do not install the ZNR near combustible substances(polyvinyl chloride wires, resin moldings, etc.). If it is difficult to do, install a nonflammable cover. 3) Across-the-line use When the ZNR is used across a line, put a current fuse in series with the ZNR(Refer to Item 2.1.1). (4) . 4) Use between line to ground (1) If the case that the ZNR is used between a line to the ground, the short-circuit of the ZNR may not blow the current fuse because of grounding resistance, which may cause smoking and ignition of the ZNR’s exterior resin. As the measure against it, install an earth leakage breaker on the power supply side of the ZNR position. If no earth leakage breaker is installed, use a thermal fuse together wth a current fuse in series. (Refer to Table 1.) (2) If the case that the ZNR is used between a live part to metal case, an electric shock may develop at a shortcircuit of the ZNR ; hence, ground the metal case to the ground or keep it from the human body. 1.3 If ZNR is shorted out and happen smoke or ignition, please cut provided current to ZNR immediately. 2. Application notes 2.1 Pay attention to the following items to avoid the shortened life and failure of the ZNR 1) Circuit conditions (1) Select a ZNR of which the maximum voltage including fluctuations in source voltage allows for the maximum permissible circuit voltage. (Refer to Table 1.) (2) In cases that surges are intermittently applied at short intervals(for example, in case that the voltage of the noise simulator test is implemented etc.), do not let them exceed the ZNR’s rated power. (3) Select a ZNR recommended in Table 1. Across-the-line use If possible, use a Part No. marked with * in case of voltage temporarily rises load unbalance of separately-wired loads, short between hot and neutral-line, open of neutral line in single-phase-three-wired system, and due to resonance at switching for a capacitive, inductive load. 14-Dec-20 Varistors (ZNR Surge Absorber) Used between line to ground Use a different Part No. from “Across-the-line use” as table 1, because of raising voltage in case of “Line to Ground Fault”. Use a Part No. marked with ** in table 1, in case of the insulation resistance test(500 VDC) for equipment. When using a Part of the varistor voltage that the insulation efficiency examination can not be cleared, there is a case where the surge absorber can be done by removing it from the circuit depending on the circuit condition(Refer examination of Japan Domestic Safety Regulations). Use a Part No. marked with *** in table 1, in case of the withstanding voltage test (1000 VAC or 1200 VAC) for equipment. (4) Concerning current fuse We recommend selecting a ZNR and the rated current of a current fuse as follows. Finally, please be sure that there is no danger if the ZNR mounted on the equipment breaks. ●Type D, Series V Standard Part No. Fuse rated current ERZV05D□□□ ERZV07D□□□ ERZV09D□□□ ERZV10D□□□ ERZV14D□□□ ERZV20D□□□ 3 A max. 5 A max. 7 A max. 7 A max. 10 A max. 10 A max. ◆ Fuses shall use rated voltages ap pro pri ate for circuits. ●Type SMD, Series VF Standard Part No. Fuse rated current ERZVF□M□□□ 5 A max. ◆ Fuses shall use rated voltages ap pro pri ate for circuits. ◆ Concerning HF series, please confirm adjusted to load dump surge and protection cooperation. The recommended fuse position is shown in table 1, “Example of ZNR application”, however, if the load current of protected equipment is larger than that of the above recommended fuse rated current, install a current fuse at the position shown below. Current Fuse Power Source Side Protected Equipment ZNR (5) Concerning thermal fuse Set a thermal fuse to get high thermal 14-Dec-20 Varistors (ZNR Surge Absorber) Table 1 Example of ZNR application DC/AC Single-phase Across-the-Line use fuse Use between Line to ground DC/AC Single-phase fuse ZNR1 L Connections example L Protected Equipmen N ZNR1 Protected Equipmen N ZNR2 Thermal Fuse Thermal coupling AC 3-phase AC 3-phase fuse fuse ZNR3 ZNR3 ZNR3 Protected Protected Equipme Equipmen ZNR3 Protected Equipme ZNR4 Example of varistor voltage ZNR3 Source voltage [AC] 100 V 120 V ZNR 1 200 V 220 V ZNR 3 240 V 380 V ZNR Nominai varistor voltage SMD Mold Type Type D 201 to 361* 201 to 361* 241 to 431* 241 to 431* 471 to 621* 471 471 to 621* 471 511, 621* 821 - Thermal Fuse Thermal coupling ZNR Source voltage [AC] 100 V 220 V ZNR 2 ZNR 4 230 V 240 V 380 V Note : Element size is Nominai varistor voltage SMD Mold Type Type D 471 471 511 621* 821 and more** 182*** 511 621* 821 and more** 182*** 112** 182*** selected by impulse Condition. (6) On use for equipment The catalog guarantees the quality as individual component. Before you use the products, please make sure to check and evaluate the products in the circumstance where they are installed in your product. 2) Operating environments (1) The ZNR is designed to be used indoors. Do not use it exposed outdoors. (2) Do not use the ZNR in places exposed to temperatures beyond the operating temperature range, such as places exposed to sunlight and vicinities of heating equipment. (3) Do not use the ZNR in places exposed to high temperatures and high humidity, such as places exposed directly to rain, wind, dew condensation, and vapor. (4) Do not use the ZNR in dusty and salinity environment and atmospheres polluted by corrosive gases, in liquids such as water, oil, chemical, organic solvent. 3) Processing conditions (1) Do not wash the ZNR by such solvents(thinner, acetone, etc.) as its exterior resin deteriorates. (2) Do not apply a strong vibration or shock (by falling, etc.) to the ZNR, cracking to its exterior resin and element may occur. (3) When coating the ZNR with resin(including molding), do not use such resin. (4) Do not bend the ZNR type D lead wires at the position close to its ZNR type D exterior resin, or apply external force to the position. (5) When soldering the ZNR lead wires, follow the recommended conditions and do not melt the solder and insulating materials constituting the ZNR. 14-Dec-20 Varistors (ZNR Surge Absorber) Soldering Method 260 ℃, within 10 seconds. 260 ℃, within 10 seconds. Flow soldering Type D Flow soldering SMD Type Reflow soldering Attention Item Recommended Condition Type D is not Refl ow soldering object part. When the package density of the part is high pill out gas because the solderability sometimes becomes bad. When Land is too big compared with the size of the terminal surface of the part, be careful because the part sometimes upset when solder fuses. Refer to Reflow soldering profile * 1 Soldering iron temperature should not exceed 400 ℃ and should not be applied for mor than 5 seconds. * 2 Profile be careful because there is a margin of error in the way of measuring. * 3 The temperature depend on the size and the package density of the substrate. Therefore, confirm every kind of the substrate. The limits of resistance to ●Soldering temperature-time profile to recommend reflow solderling heat 260 Reflow soldering Preheating Gradual cooling 250 Rising temp. （Ⅰ） Gradual Preheating cooling Rising temp. Main heating Temperature (°C) Soldering Temperature (°C) Temperature (°C) Flow soldering 230 220 210 200 0 （Ⅱ） Time 240 Time 10 20 30 40 The normal to 130 ℃ max. 120 s Rising temperature I The normal to preheating temperature 30 to 60 s Soldering max. 260 ℃ max. 10 s Preheating 150 ℃ to 180 ℃ 60 to 120 s Preheating to 200 ℃ 2 to 6 ℃ / s Gradual cooling Rising temperature II Main heating Gradual cooling 60 Time (s) Preheating Gradual cooling 50 (cf. The limit of resistance to refl ow soldering heat) 200 ℃ to 100 ℃ 1 to 4 ℃ / s (Reflow soldering shall be within two times) (6) Lead-wire terminal land-hole (only for Type D) When designing lead-wire-terminal land-hole of circuit board, please check actual ZNR by reference specification about center value of lead-wire terminal pitch. (7) Mounting (only for Type SMD) In case of mounting ZNR on a Printed Circuit Board, be careful not to put excessive impact load, such as pressure from adsorption nozzle, and mechanical impact/stress of position-shifting or positioning. Also, we recommend you to fix a Printed Circuit Board to sheathing resin with an adhesive in case of position-shifting of ZNR when mounting. 4)  Long-term storage (1) Do not store the ZNR under high temperature and high humidity. Store it indoor environment at a temperature up to 40 ℃ and at humidity below 75 %RH, and use it within two years. Before using the ZNR that has been stored for a long period(two years or longer), confirm the solderability. (2) Avoid atmospheres full of corrosive gases (hydrogen sulfide, sulfurous acid, chlorine, ammonia, etc.). (3) Avoid direct sunlight and dew condensation. 5)  Rated Voltage for UL or other safety certifications Our ZNR define “ Max. Allowable Voltage” and “Rated Voltage “ to keep leakage current specification and others. If you getting certificate of safety approval about your equipment with our ZNR, please follow our “Rated Voltage”. 14-Dec-20 Varistors (ZNR Surge Absorber) 6)  Dropped product Do not drop this product on the floor. If this product is dropped, it can be damaged mechanically or electrically. Avoid using the dropped product. 3.  Notices 3.1  Our ZNR was designed and manufactured for standard applications such as general electronics devices, office equipment, information and communications equipment, measuring instruments, household appliances and audio-video equipment.For applications in which special quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or cause threat of personal injury (such as for aircraft and aerospace equipment, traffic and transport equipment, combustion equipment, medical equipment, accident prevention and anti-theft devices, and safety equipment), please be sure to consult with our sales representative　in advance and to exchange product specifications which conform to such applications. 　applications in which special quality and reliability are required, or if the failure or malfunction of the products may. 3.2  Note that we do not take any responsibility for faults and abnormalities resulting from the use not in conformity with the contents of entries in the delivery specification. 3.3 There is a possibility that the ZNR will unexpectedly cause smoke or ignite because of an abnormal rise of the　circuit voltage and invasion of excessive surge. To prevent that accident from spreading over the equipment and not to expand the damage, use multiplex protection such as the adoption of frameretardant materials for housing parts and structural parts. 4. Applicable laws and regulations , others 4.1 This product not been manufactured with any ozone depleting chemical controlled under the Montreal Protocol. 4.2 This product comply with RoHS(Restriction of the use of certain Hazardous Substance in electrical and electronic　equipment) (DIRECTIVE 2011/65/EU and (EU)2015/863). 4.3 All the materials used in this part are registered material under the Law Concerning the Examination and Regulationof Manufacture, etc. of Chemical Substance. 4.4 If you need the notice by letter of “A preliminary judgement on the Laws of Japan foreign exchange and Foreign Trade Control”, be sure to let us know. 4.5 These products are not dangerous goods on the transportation as identified by UN(United nations) numbers or UN classification. 5. Others 5.1 As to the disposal of ZNR, check the method of disposal in each country or origin where the ZNR are incorporated in your products to be used. 5.2 The technical information in this specification provides example of our products’ typical operations and application circuit. We do not guarantee the non-infringement of third party’s intellectual property rights and we do not grant any license, right or interest in our intellectual property. 6. AEC-Q200 Compliant (Type SMD, Series HF) The products are tested based on all or part of the test conditions and methods defined in AEC-Q200. Please consult with Panasonic for the details of the product specification and specific evaluation test results, etc., and please review and approve Panasonic's product specification before ordering. 14-Dec-20