ESB-30B304

Push Switches/ESB30 ESB30 Push Switches Type: ESB30 (H=12.5 mm) Features R educed interlo ck operatio n switching noise (-10 dB compared to the current value) Simultaneous locking prevention mechanism Recommended Applications Operation switches for automobiles (air conditioners switches, Hazard switches, etc.) Secondary power switches for lower voltage in consumer electronic equipment and different types of mode switches Explanation of Part Numbers 1 2 3 Product Code 4 5 Type 6 7 8 9 Travel Operating A : 1.5 mm 1 : PP (Self-lock) B : 2.5 mm 3 : NL (Non-lock) 10 Design No. 50 μA 3 V DC to 0.2 A 14 V DC (Resistive load) Travel Lock Travel=2.5 mm Mounting Height Full Travel=3.5 mm 12.5 mm Poles and Throws 2-poles 2-throws Operating Mode Self-lock, Non-lock Switching Mode Non-shorting Operating Force 2.0 N±1.0 N, 3.5 N±1.5 N Minimum Quantity/Packing Unit 480 pcs. (Tray Pack) Quantity/Carton 2,40 0 pcs. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 2017.01 industrial.panasonic.com/ac/e/ –1–   Panasonic Corporation 2017 ANCTB44E 201701-Fd Push Switches/ESB30 Standard Products Operating Force Lever Height Lock Travel 2 N±1.0 N 20.5 mm 2.5 mm 3.5 N±1.5 N 20.5 mm Terminal Shape Operating Mode Straight Formed PP ESB30B132 ESB30B102 NL ESB30B304 ESB30B305 PP ESB30B103 ESB30B133 NL ESB30B332 ESB30B333 2.5 mm Note: PP=Self-lock, NL=Non-lock Dimensions in mm (not to scale) ESB30B132 Lock Travel Full Travel 2.5 mm 3.5 mm Operating Force (N) 2-poles 2-throws 2.0 1.0 10.9 1.0 2.0 Travel (mm) F-S Characteristics 5.5 4.5 Lock travel 3.8 0.2 3.30±0.05 3.5 12.5 20.5 1.0±0.1 2.5±0.1 1.5 N.O. C N.C. 0.7 2-2.5 2.50 7.0 8.9 2.50 7.00 C 6-φ1.00 PWB mounting hole for reference (Tolerance:±0.05) View from terminal side 1 2 2.5±0.1 A details R 1.4 5 PUSH N.O. N.C. 0. 0.8 0.3 4 C 2.8 C 1.8 A Full travel (7.0) 8.1 Circuit diagram (View from terminal side) Forming dimension of terminal (Except for common terminal) Application Notes: Operating force should be applied at the center of the lever. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ –2–   Panasonic Corporation 2017 ANCTB44E 201701-Fd