ESE-13H05A

Detector Switches/ESE13 ESE13 Detector Switches Type: ESE13 Features Recommended Applications Thin type : Height=1.2 mm Highly reliable contact SMD type (Embossed taping, Reflow soldering) Detection of media in portable electronic equipment (Mobile phones / Digital still cameras / Camcorders) Explanation of Part Numbers 1 2 3 4 5 6 7 9 Design No Product Code 6th H V 8 Type From under to top operation type From top to under operation type Rating 9th A B C D Positioning Terminal Type Without Boss With Boss Without Boss With Boss J-bent Type J-bent Type Straight Type Straight Type 50 μA 3 V DC to 10 mA 5 V DC (Resistive load) 50 0 mΩ max. (Initial) Contact Resistance Insulation Resistance 100 MΩ min. (at 100 V DC for 1 minute) Dielectric Withstanding Voltage 100 V AC (50 Hz or 60 Hz) for 1 minute Operating Force 3 0 0 m N m a x. Mounting Height 1.2 mm Poles and Throws 1-pole 1-throw ESE13 V Type : 2.15 mm (2.15 mm) ESE13 H Type : 3.05 mm (2.15 mm) Full Travel (Pushing distance) Operating Life 50,0 0 0 cycles min. Temperature Range –10 °C to +60 °C (Standard), –40 °C to +85 °C (Automotive) Heat Resistance +70 °C for 9 6 hours Low Temperature Resistance –25 °C for 9 6 hours Humidity Resistance Minimum Quantity/Packing Unit Quantity/Carton +40 °C 9 0 % to 95 % RH for 9 6 hours ESE13H 5,0 0 0 pcs. Embossed Taping (Reel Pack) ESE13V 3,0 0 0 pcs. Embossed Taping (Reel Pack) ESE13H 30 ,00 0 pcs. ESE13V 18,0 0 0 pcs. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 2017.06 industrial.panasonic.com/ac/e/ –1–   Panasonic Corporation 2017 ANCTB48E 201706-Fd Detector Switches/ESE13 Dimensions in mm (not to scale) ESE13V J-bent terminals 1-pole 1-throw B 3.6 B 0.55 3.0 PWB mounting hole for reference (Pitch tolerance: ±0.05) 0.55 Without boss ESE13V01C 3.6 Separate terminal 1.95 Common terminal 0.7 0.7 2.0 1.0 A 4.6 2.2 C +0.1 -0 0.8 2-φ B D Release position 0.4 Pivot center 1.2±0.2 (1) (0.58) ction dire tion ) ˚ (60 ˚) (15 B D Separate 3.0 0.55 terminal PWB mounting hole for reference ON angular dimension (Pitch tolerance: ±0.05) Ac 4.2 1.14±0.3 1.55±0.35 ON start position 3.05±0.3 2.65±0.3 0 φ0.6 -0.1 x. A C 0.5 0.65 Common terminal ma 1.2 With boss ESE13V01D 0.5 0.2 1.0 4.3 0.5 2±0.05 3.0 0.5 0.5 0.45 0.6 0.9 1.2±0.2 (1) (0.58) 0.8 2-φ 0.65 0.4 Pivot center ction dire tion ˚) (60 ) ˚ (15 3.05±0.3 2.65±0.3 ON angular dimension Ac ESE13V Straight terminals 1-pole 1-throw 4.2 No. 2 0.5 2±0.05 1.0 3.0 0.5 0.5 0.2 0.55 ma 0.5 0 φ0.6 -0.1 x. ESE13H J-bent terminals 1-pole 1-throw With boss ESE13H01B Common terminal 0.7 Common terminal C A 0.7 2.0 1.0 A 0.4 (0.38) 1.2±0.2 Separate terminal D B 3.0 0.55 PWB mounting hole for reference (Pitch tolerance: ±0.05) 0.5 0.5 0.55 2±0.05 1.0 0.65 0.5 0.45 (0.58) 0.6 0.65 3.05±0.3 ON angular dimension °) (60 °) (15 Separate B D terminal 0.77±0.3 Full travel 2.14±0.35 ON start position 0.2 ma Pivot center x. 1.6±0.3 1 +00. 0.8 2-φ 4.3 2.2 3.6 Without boss ESE13H01A 2.3 4.2 C 1.2 No. 3 Separate terminal D 1.14±0.3 1.55±0.35 .1 +0 -0 A 4.3 Separate D terminal Release position ON start position 1.0 2.2 A 0.7 2.0 Common terminal C 1.2 C Without boss ESE13V01A 0.7 1.95 4.2 Common terminal 0.45 With boss ESE13V01B 0.6 0.9 No. 1 0.5 0 φ0.6 –0.1 3.0 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ –2–   Panasonic Corporation 2017 ANCTB48E 201706-Fd Detector Switches/ESE13 Dimensions in mm (not to scale) ESE13H Straight terminals 1-pole 1-throw 2.3 Common 0.7 terminal C A Separate terminal 0.2 Separate terminal ON angular dimension 0.77±0.3 (2.14±0.35) A 2 0.5 0.6 0.65 (0.38) 0.6 B 0.55 0.65 0.4 3.05±0.3 1.6±0.3 1.2±0.2 ˚) ˚) (15 (0.58) 0.5 0.55 2±0.05 1.0 3.0 3 (60 Pivot center D PWB mounting hole for reference (Pitch tolerance: ±0.05) ma x. 0.5 2.0 .1 +0 0 8- 0. -φ B D Full travel ON start position 0.7 4.3 C 4.6 2.2 Without boss ESE13H01C 4.2 Common terminal 1.2 With boss ESE13H01D 3.6 No. 4 0 φ0.6 -0.1 Circuit Diagram 1-pole 1-throw (N.O) Common C terminal Standard Reel Dimensions in mm (not to scale) Taping Reel END P=8.0±0.1 4.0±0.1 Drawing direction TOP 2.0±0.1 Leading portion 400 mm min Pilot holes 13.5 .1 +0 0 Carrier tape .5 φ1 7.5±0.1 1.75±0.1 16.4 16.0±0.3 φ380.0±2.0 Embossed Carrier Taping Non-packed portion (160 mm min.) Packed portion Non-packed portion (100 mm min.) Cover tape Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ –3–   Panasonic Corporation 2017 ANCTB48E 201706-Fd