Products Catalog
Inductors
・For automotive
・For consumer
2022.6
Inductors INDEX
Product item
Part number
Type ∙ Series
Guidelines and precautions
Page
1
PCC-M0530M/M0540M
PCC-M0630M/M0645M
M series
PCC-M0754M/M0750M
PCC-M0854M/M0850M
PCC-M1054M/M1050M
ETQ P3M□□□Y□□
ETQ P4M□□□Y□□
ETQ P5M□□□Y□□
ETQ P6M□□□YLC/KLC
2
PCC-M1040ML/M1050ML/M1060ML (MC)
Power Choke Coils
(Automotive Grade)
MS series
PCC-M0854MS/M1050MS (MC)
ETQ P5M□□□YSK
ETQ P5M□□□YSC
19
MF series
PCC-M1280MF/M15A0MF (MC)
ETQ P8M□□□JFA
ETQ PAM□□□JFW
23
ETQ P3M□□□KV□
ETQ P4M□□□KV□
31
ETQ P4M□□□KFN
ETQ P4M□□□KFM
43
ETQ P3M□□□HF□
50
ETQ PDH240DTV
55
LP series
LE series
H series
PCC-M0530M-LP/M0630M-LP
PCC-M0840M-LP/M1040M-LP (MC)
PCC-M0648M-LE
PCC-M0748M-LE (MC)
PCC-M0530M-H
PCC-M0630M-H (MC)
PCC-D1413H (DUST)
Power Choke Coils
(Consumer use)
NRFND
Voltage Step-up
Coils
Soldering conditions (Automotive Grade)
58
Application Guidelines (Automotive Grade)
59
PCC-M0730L (MC)
ETQ P3L
61
PCC-M0740L (MC) Low DCR type
ETQ P4L
63
PCC-M1040L (MC)
ETQ P4L
65
PCC-M1040L (MC) Low DCR type
ETQ P4L
67
PCC-M1250L (MC)
ETQ P5L
69
Chip type
Soldering conditions (Consumer use)
71
Packaging methods (Consumer use)
72
Application Guidelines (Consumer use)
73
ELT 3KN
75
Soldering conditions (Voltage Step-up Coils)
77
Packaging methods (Voltage Step-up Coils)
78
Application Guidelines (Voltage Step-up Coils)
79
NRFND
Not recommended for new design
Guidelines and precautions regarding the
technical information and use of our products
described in this online catalog.
■ If you want to use our products described in this online catalog for applications requiring special
qualities or reliability, or for applications where the failure or malfunction of the products may directly
jeopardize human life or potentially cause personal injury (e.g. aircraft and aerospace equipment,
traffic and transportation equipment, combustion equipment, medical equipment, accident prevention,
anti-crime equipment, and/or safety equipment), it is necessary to verify whether the specifications of
our products fit to such applications. Please ensure that you will ask and check with our inquiry desk
as to whether the specifications of our products fit to such applications use before you use our products.
■ The quality and performance of our products as described in this online catalog only apply to our
products when used in isolation. Therefore, please ensure you evaluate and verify our products under
the specific circumstances in which our products are assembled in your own products and in which our
products will actually be used.
■ If you use our products in equipment that requires a high degree of reliability, regardless of the
application, it is recommended that you set up protection circuits and redundancy circuits in order
to ensure safety of your equipment.
■ The products and product specifications described in this online catalog are subject to change for
improvement without prior notice. Therefore, please be sure to request and confirm the latest product
specifications which explain the specifications of our products in detail, before you finalize the design
of your applications, purchase, or use our products.
■ The technical information in this online catalog provides examples of our products' typical operations
and application circuits. We do not guarantee the non-infringement of third party's intellectual property
rights and we do not grant any license, right, or interest in our intellectual property.
■ If any of our products, product specifications and/or technical information in this online catalog is to
be exported or provided to non-residents, the laws and regulations of the exporting country,
especially with regard to security and export control, shall be observed.
■ The switchover date for compliance with the RoHS Directive/REACH Regulations varies depending
on the part number or series of our products.
■ When you use the inventory of our products for which it is unclear whether those products are
compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the website
inquiry form and contact us.
We do not take any responsibility for the use of our products outside the scope of the
specifications, descriptions, guidelines and precautions described in this online catalog.
16-Apr-21
1
UPDATE
Power Inductors
Power Choke Coil (Automotive Grade)
PCC-M0530M, M0540M, M0630M, M0645M series
PCC-M0754M, M0750M, M0854M, M0850M series
PCC-M1054M, M1050M, M1040ML, M1050ML, M1060ML series
High heat resistance and high reliability using metal composite core (MC)
Industrial property : Patents 21 (Registered 2 / Pending 19)
Features
●High heat resistance : Operation up to 150 ℃ including self-heating
●High-reliability :
High vibration resistance as result of newly developed
integral construction; under severe reliability conditions
of automotive and other strenuous applications
●High bias current : Excellent inductance stability using
ferrous alloy magnetic material (Fig.1)
●Temp. stability :
Excellent inductance stability over broad temp. range (Fig.1)
●Low audible (buzz) noise :
A gapless structure achieved with metal composite core
●High efficiency :
Low DC resistance of winding and low eddy-current loss of the core
●Shielded construction
●AEC-Q200 compliant
●RoHS compliant
●Fig.1
Inductance v.s. DC current, Temp.
ETQP5M470YFM (reference)
60
Inductors (μH)
50
40
30
25 °C
100 °C
125 °C
150 °C
20
10
0
0
0.5
1
1.5
2
2.5
3
DC Bias (A)
Recommended applications
●Noise filter for various drive circuitry requiring high temp. operation and peak current handling capability
●Boost-Converter, Buck-Converter DC/DC
Standard packing quantity (Minimum quantity/Packing unit)
: PCC - M0645M,M0754M,M0750M,M0854M,M0850M,
M1054M,M1050M,M1040ML,M1050ML,M1060ML
: PCC - M0530M,M0540M,M0630M
● 1,000 pcs/box (2 reel)
● 2,000 pcs/box (2 reel)
Explanation of part numbers
1
2
3
4
E
T
Q
P
Product code
Classification
5
6
7
8
9
M
Height
10
11
12
Y
Inductance
Winding
Core
Suffix
Size
(Example)
Code
4R7
220
101
Inductance
4.7 μH
22 μH
100 μH
Code
P
N
M
K
C
Size
□ 5 mm
□ 6 mm
□ 7 mm
□ 8 mm
□ 10 mm
Temperature rating
Operating temperature range
After PWB mounting
Storage condition
Before PWB mounting
Tc : -40 ℃ to +150 ℃ (Including self-temperature rise)
Ta : -5 ℃ to +35 ℃ 85%RH max.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
2
30-Jun-22
Power Choke Coil (Automotive Grade)
1. PCC-M0530M / PCC-M0540M series (ETQP3M□□□YFP / ETQP4M□□□YFP)
Standard parts
DCR (at 20 ℃)
(mΩ)
Inductance*1
Part No.
L0
(μH)
ETQP3M2R2YFP
ETQP3M3R3YFP
ETQP4M4R7YFP
ETQP4M220YFP
Tolerance
Typ. (max.)
(%)
2.2
3.3
4.6
22.0
22.6 ( 24.8)
31.3 ( 34.4)
36.0 ( 39.6)
163.0 (179.0)
±20
MSL
level
Rated current (A) Typ.
Tolerance
(%)
±10
*2
△T= 40 K
( )*3
△L= –30 %*4
*5
10.9
8.6
7.7
3.1
1
1
1
1
5.8 (4.8)
5.0 (4.1)
4.8 (4.0)
2.3 (1.9)
Series
[Size (mm)]
PCC-M0530M
[5.5×5.0×3.0]
PCC-M0540M
[5.5×5.0×4.0]
*1: Measured at 100 kHz
*2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with
high-heat dissipation (heat dissipation constant 5.5x5.0x3.0 mm : approx. 52 K/W, 5.5x5.0x4.0 mm:approx. 48 K/W).
*3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of
FR4 t=1.6 mm and DC current is applied.
*4: Saturation rated current : DC current which causes L(0) drop –30 %.
*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.
◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This
should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150℃
should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance characteristics (Reference①)
● Inductance vs DC Current
[ ETQP3M2R2YFP ]
[ ETQP3M3R3YFP ]
5
2.0
Inductance (μH)
Inductance (μH)
2.5
1.5
1.0
0.5
0.0
0
2
4
6
8
10
12
14
4
3
2
1
0
0
2
4
DC Bias (A)
[ ETQP4M4R7YFP ]
Inductance (μH)
Inductance (μH)
5
4
3
2
1
0
0
2
4
6
8
6
8
12
10
14
DC Bias (A)
10
12
14
DC Bias (A)
[ ETQP4M220YFP ]
30
25
20
15
10
5
0
0
1
2
3
4
5
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
3
30-Jun-22
Power Choke Coil (Automotive Grade)
Performance characteristics (Reference②)
[ ETQP3M2R2YFP ]
80
Temperature rise ΔT(K)
Temperature rise ΔT(K)
● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4).*3
PWB condition B : Multilayer PWB with high heat dissipation performance.*2
60
40
20
0
0
1
2
3
4
5
6
7
8
60
40
20
0
DC Bias (A)
[ ETQP4M4R7YFP ]
Temperature rise ΔT(K)
Temperature rise ΔT(K)
60
40
20
0
1
2
3
4
5
0
1
6
7
DC Bias (A)
2
3
4
DC Bias (A)
5
6
7
3.0
3.5
[ ETQP4M220YFP ]
80
80
0
[ ETQP3M3R3YFP ]
80
60
40
20
0
0
0.5
1.0
1.5
2.0
2.5
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
4
30-Jun-22
Power Choke Coil (Automotive Grade)
2. PCC-M0630M / PCC-M0645M series (ETQP3M□□□YFN / ETQP4M□□□YFN)
Standard parts
Inductance*1
Part No.
L0
(μH)
Tolerance
(%)
0.68
1.0
2.2
3.3
6.8
10.0
22.0
33.0
47.0
ETQP3MR68YFN
ETQP3M1R0YFN
ETQP4M2R2YFN
ETQP4M3R3YFN
ETQP4M6R8YFN
ETQP4M100YFN
ETQP4M220YFN
ETQP4M330YFN
ETQP4M470YFN
±20
DCR (at 20 ℃)
(mΩ)
△T= 40 K*2
Tolerance
Typ. (max.)
(%)
6.3 (6.90)
7.9 (8.70)
10.4 (11.44)
16.1 (17.71)
39.3 (43.20)
54.2 (59.60)
126.0 (138.60)
172.0 (189.20)
210.0 (231.00)
MSL
level
Rated current (A) Typ.
( )*3
12.0 (9.8)
10.7 (8.8)
10.2 (8.0)
8.2 (6.4)
5.2 (4.1)
4.5 (3.5)
2.9 (2.3)
2.5 (2.0)
2.2 (1.8)
±10
△L= –30 %*4
*5
24.0
20.0
14.4
13.3
10.0
8.3
6.0
4.1
3.8
1
1
1
1
1
1
1
3
1
Series
[Size (mm)]
PCC-M0630M
[6.5×6.0×3.0]
PCC-M0645M
[6.5×6.0×4.5]
*1: Measured at 100 kHz
*2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with
high-heat dissipation (heat dissipation constant 6.5x6.0x3.0 mm : approx. 44 K/W, 6.5x6.0x4.5 mm:approx. 37 K/W).
*3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of
FR4 t=1.6 mm and DC current is applied.
*4: Saturation rated current : DC current which causes L(0) drop –30 %.
*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.
◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This
should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150℃
should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance characteristics (Reference①)
● Inductance vs DC Current
[ ETQP3M1R0YFN ]
[ ETQP3MR68YFN ]
0.5
0.4
0.3
0.2
0.1
0.0
0
4
8
12
16
20
3.0
0.8
2.5
0.6
0.4
0.2
0.0
24
[ ETQP4M3R3YFN ]
0
5
10
15
4
6
8 10 12
6
5
4
3
2
1
0
14 16 18 20
0
DC Bias (A)
[ ETQP4M220YFN ]
2
3
4
5
6
7
10
5
0
2
4
6
8
DC Bias (A)
10
12
20
8
6
4
2
0
8 9 10
1
2
3
4
5
6
7
8
9
[ ETQP4M470YFN ]
50
30
20
10
0
0
DC Bias (A)
Inductance (μH)
Inductance (μH)
Inductance (μH)
15
15
10
[ ETQP4M330YFN ]
20
0
1
40
25
10
DC Bias (A)
[ ETQP4M100YFN ]
DC Bias (A)
30
5
12
Inductance (μH)
Inductance (μH)
Inductance (μH)
1
0
[ ETQP4M6R8YFN ]
8
2
2
1.0
0.0
20
7
0
1.5
DC Bias (A)
3
0
2.0
0.5
DC Bias (A)
4
[ ETQP4M2R2YFN ]
1.0
Inductance (μH)
0.6
Inductance (μH)
Inductance (μH)
0.7
0
0.5 1 1.5 2 2.5 3 3.5 4 4.5 5
40
30
20
10
0
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
5
0 0.5 1 1.5 2 2.5 3 3.5 4
4.5 5
DC Bias (A)
30-Jun-22
Power Choke Coil (Automotive Grade)
Performance characteristics (Reference②)
● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4).*3
PWB condition B : Multilayer PWB with high heat dissipation performance.*2
40
20
0
4
2
6
80
Temperature rise ΔT(K)
60
0
60
40
20
0
0
8 10 12 14 16 18
4
2
6
DC Bias (A)
40
20
4
6
8
10
12
2
4
40
20
0
0
1
40
20
DC Bias (A)
3
4
5
6
7
3
4
60
40
20
0
0.5
1
1.5
2
12 14 16
60
40
20
0
0
1
2
3
4
5
6
2.5
3
80
60
40
20
0
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
6
10
[ ETQP4M470YFN ]
80
0
8
DC Bias (A)
Temperature rise ΔT(K)
60
2
2
6
80
[ ETQP4M330YFN ]
Temperature rise ΔT(K)
Temperature rise ΔT(K)
0
[ ETQP4M100YFN ]
60
[ ETQP4M220YFN ]
1
0
DC Bias (A)
80
0
20
DC Bias (A)
80
DC Bias (A)
0
40
8 10 12 14 16 18
Temperature rise ΔT(K)
60
2
60
[ ETQP4M6R8YFN ]
Temperature rise ΔT(K)
Temperature rise ΔT(K)
[ ETQP4M3R3YFN ]
0
80
DC Bias (A)
80
0
[ ETQP4M2R2YFN ]
[ ETQP3M1R0YFN]
Temperature rise ΔT(K)
Temperature rise ΔT(K)
[ ETQP3MR68YFN ]
80
0
0.5
1
1.5
2
2.5
3
DC Bias (A)
30-Jun-22
Power Choke Coil (Automotive Grade)
3. PCC-M0754M / PCC-M750M series (ETQP5M□□□YFM / ETQP5M□□□YGM)
Standard parts
DCR (at 20 ℃)
(mΩ)
Inductance*1
Part No.
L0
(μH)
ETQP5M3R3YFM
ETQP5M4R7YFM
ETQP5M6R8YFM
ETQP5M100YFM
ETQP5M220YFM
ETQP5M330YFM
ETQP5M470YFM
ETQP5M680YFM
3.3
4.7
6.8
10.0
22.0
33.0
48.0
68.0
ETQP5M101YGM
95.0
Tolerance
(%)
±20
△T= 40 K*2
Tolerance
Typ. (max.)
(%)
11.9 (13.09)
20.4 (22.50)
26.7 (29.40)
37.6 (41.30)
92.0 (102.00)
120.0 (132.00)
156.0 (172.00)
251.0 (276.10)
MSL
level
Rated current (A) Typ.
( )*3
10.4 (8.3)
8.0 (6.3)
6.9 (5.5)
5.7 (4.7)
3.7 (3.0)
3.3 (2.6)
2.9 (2.3)
2.3 (1.9)
±10
1.9 (1.4)
348.0 (382.80)
Series
[Size (mm)]
△L= –30 %*4
*5
14.4
13.1
12.1
10.6
5.8
4.8
4.1
3.9
1
1
1
1
1
1
1
1
PCC-M0754M
[7.5×7.0×5.4]
3.1
3
PCC-M0750M
[7.5×7.0×5.0]
*1: Measured at 100 kHz
*2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with
high-heat dissipation (heat dissipation constant 7.5x7.0x5.4 mm : approx. 31 K/W, 7.5x7.0x5.0 mm:approx. 29 K/W).
*3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of
FR4 t=1.6 mm and DC current is applied.
*4: Saturation rated current : DC current which causes L(0) drop –30 %.
*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.
◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This
should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150℃
should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance characteristics (Reference①)
● Inductance vs DC Current
[ ETQP5M3R3YFM ]
[ ETQP5M4R7YFM ]
3
2
1
0
0
5
10
15
6
8
5
7
6
4
3
2
1
0
20
Inductance (μH)
Inductance (μH)
Inductance (μH)
4
[ ETQP5M100YFM ]
5
4
2
6
4
8
10
0
20
30
20
10
10
5
0
2
4
6
8
4
DC Bias (A)
5
6
8
10
12 14
16
30
20
10
0
10
0
2
4
6
8
DC Bias (A)
[ ETQP5M680YFM ]
100
[ ETQP5M101YGM ]
80
60
40
20
0
3
6
[ ETQP5M330YFM ]
Inductance (μH)
Inductance (μH)
40
2
4
2
DC Bias (A)
15
80
50
1
0
DC Bias (A)
[ ETQP5M470YFM ]
Inductance (μH)
15
20
0
12 14 16
60
0
2
40
DC Bias (A)
0
10
Inductance (μH)
Inductance (μH)
Inductance (μH)
6
2
3
[ ETQP5M220YFM ]
25
8
0
4
DC Bias (A)
10
0
5
1
0
DC Bias (A)
12
[ ETQP5M6R8YFM]
0
1
2
3
4
5
6
7
8
60
40
20
0
0
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
7
1
2
3
4
5
DC Bias (A)
30-Jun-22
Power Choke Coil (Automotive Grade)
Performance characteristics (Reference②)
● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4).*3
PWB condition B : Multilayer PWB with high heat dissipation performance.*2
[ ETQP5M4R7YFM ]
40
20
0
2
4
6
8
10
12
14
60
40
20
0
DC Bias (A)
0
[ ETQP5M100YFM ]
40
20
0
4
6
4
DC Bias (A)
8
0
0
60
40
20
0
2
0
1
2
3
4
5
20
0
3
4
8
10
40
20
0
1
2
3
4
5
DC Bias (A)
[ ETQP5M101YGM ]
80
80
60
40
20
0
6
60
0
Temperature rise ΔT(K)
Temperature rise ΔT(K)
40
4
DC Bias (A)
[ ETQP5M330YFM ]
[ ETQP5M680YFM ]
60
DC Bias (A)
20
80
[ ETQP5M470YFM ]
2
10
40
DC Bias (A)
80
1
8
80
DC Bias (A)
0
6
Temperature rise ΔT(K)
Temperature rise ΔT(K)
Temperature rise ΔT(K)
60
2
2
60
[ ETQP5M220YFM ]
80
0
Temperature rise ΔT(K)
60
0
Temperature rise ΔT(K)
[ ETQP5M6R8YFM]
80
80
Temperature rise ΔT(K)
Temperature rise ΔT(K)
[ ETQP5M3R3YFM ]
80
0
1
2
3
4
60
40
20
0
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
8
0
0.5
1
1.5
2
2.5
3
DC Bias (A)
30-Jun-22
Power Choke Coil (Automotive Grade)
4. PCC-M0854M / PCC-M0850M series (ETQP5M□□□YFK / ETQP5M□□□YGK)
Standard parts
Inductance*1
Part No.
L0
(μH)
Tolerance
(%)
ETQP5M470YFK
2.5
3.3
10.0
15.0
22.0
48.0
ETQP5M101YGK
100.0
ETQP5M2R5YFK
ETQP5M3R3YFK
ETQP5M100YFK
ETQP5M150YFK
ETQP5M220YFK
DCR (at 20 ℃)
(mΩ)
Typ. (max.)
△T= 40 K*2
Tolerance
(%)
125.0 (138.00)
( )*3
14.0 (11.9)
12.5 (10.7)
6.7 (5.7)
5.5 (4.7)
4.8 (4.1)
3.4 (2.9)
302.0 (333.00)
2.1 (1.7)
7.6 (8.40)
9.5 (10.45)
33.4 (36.80)
±20
48.2 (53.10)
±10
63.0 (70.00)
MSL
level
Rated current (A) Typ.
Series
[Size (mm)]
△L= –30 %*4
*5
20.1
17.9
13.0
7.2
6.9
5.4
1
1
1
1
1
1
PCC-M0854M
[8.5×8.0×5.4]
3.0
3
PCC-M0850M
[8.5×8.0×5.0]
*1: Measured at 100 kHz
*2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with
high-heat dissipation (heat dissipation constant 8.5x8.0x5.4 mm : approx. 27 K/W, 8.5x8.0x5.0 mm:approx. 29 K/W).
*3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of
FR4 t=1.6 mm and DC current is applied.
*4: Saturation rated current : DC current which causes L(0) drop –30 %.
*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.
◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This
should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150℃
should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance characteristics (Reference①)
● Inductance vs DC Current
[ ETQP5M3R3YFK ]
[ ETQP5M2R5YFK ]
3.0
Inductance (μH)
2.0
1.5
1.0
0.5
0
5
10
20
15
25
12
3
Inductance (μH)
Inductance (μH)
2.5
0.0
2
1
0
30
0
5
DC Bias (A)
15
20
25
5
6
4
8
4
2
0
2
4
10
12
DC Bias (A)
8
10
12 14
16
[ ETQ5M470YFK ]
60
20
15
10
5
0
6
DC Bias (A)
Inductance (μH)
Inductance (μH)
10
2
6
[ ETQP5M220YFK ]
15
0
8
0
30
25
20
Inductance (μH)
10
10
DC Bias (A)
[ ETQP5M150YFK ]
0
[ ETQP5M100YFK ]
4
0
2
4
6
8
10
50
40
30
20
10
0
0
DC Bias (A)
2
4
6
8
DC Bias (A)
[ ETQP5M101YGK ]
Inductance (μH)
120
100
80
60
40
20
0
0
1
2
3
4
5
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
9
30-Jun-22
Power Choke Coil (Automotive Grade)
Performance characteristics (Reference②)
● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4).*3
PWB condition B : Multilayer PWB with high heat dissipation performance.*2
40
20
0
8
12
16
20
60
40
20
0
0
3
6
DC Bias (A)
40
20
0
3
4
5
6
7
8
DC Bias (A)
Temperature rise ΔT(K)
Temperature rise ΔT(K)
60
2
15
18
60
40
20
0
0
2
80
60
40
20
0
0
1
2
3
4
5
6
4
6
DC Bias (A)
8
10
[ ETQ5M470YFK ]
[ ETQP5M220YFK ]
[ ETQP5M150YFK ]
1
12
80
DC Bias (A)
80
0
9
7
Temperature rise ΔT(K)
4
80
Temperature rise ΔT(K)
60
0
[ ETQP5M100YFK ]
[ ETQP5M3R3YFK ]
Temperature rise ΔT(K)
Temperature rise ΔT(K)
[ ETQP5M2R5YFK ]
80
80
60
40
20
0
0
DC Bias (A)
1
2
3
4
5
DC Bias (A)
Temperature rise ΔT(K)
[ ETQP5M101YGK ]
80
60
40
20
0
0
0.5
1.0
1.5
2.0
2.5
3.0
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
10
30-Jun-22
Power Choke Coil (Automotive Grade)
5. PCC-M1054M / PCC-M1050M series (ETQP5M□□□YFC / ETQP5M□□□YGC)
Standard parts
Inductance*1
Part No.
L0
(μH)
ETQP5M3R3YGC
1.5
2.5
3.3
4.7
10.0
15.0
22.0
33.0
47.0
66.0
3.3
ETQP5M101YGC
97.0
ETQP5M1R5YFC
ETQP5M2R5YFC
ETQP5M3R3YFC
ETQP5M4R7YFC
ETQP5M100YFC
ETQP5M150YFC
ETQP5M220YFC
ETQP5M330YFC
ETQP5M470YFC
ETQP5M680YFC
Tolerance
(%)
±20
DCR (at 20 ℃)
(mΩ)
△T= 40 K*2
Tolerance
Typ. (max.)
(%)
3.8 (4.20)
5.3 (5.90)
7.1 (7.90)
10.2 (11.30)
23.8 (26.20)
35.6 (39.16)
45.0 (50.00)
68.5 (75.40)
99.0 (108.90)
136.0 (149.60)
7.1 (7.81)
MSL
level
Rated current (A) Typ.
( )*3
21.4 (17.9)
18.1 (15.1)
15.7 (13.1)
13.1 (10.9)
8.5 (7.1)
7.0 (5.8)
6.2 (5.2)
5.0 (4.2)
4.2 (3.5)
3.6 (3.0)
14.7 (11.8)
±10
208.0 (229.00)
2.7 (2.2)
△L= –30 %*4
*5
35.1
27.2
22.7
20.0
10.7
12.0
8.8
7.6
6.8
4.9
23.4
1
1
1
1
1
1
1
1
1
1
1
3.0
3
Series
[Size (mm)]
PCC-M1054M
[10.7×10.0×5.4]
PCC-M1050M
[10.7×10.0×5.0]
*1: Measured at 100 kHz
*2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with
high-heat dissipation (heat dissipation constant 10.7x10.0x5.4 mm : approx. 23 K/W, 10.7x10.0x5.0 mm:approx. 26 K/W).
*3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of
FR4 t=1.6 mm and DC current is applied.
*4: Saturation rated current : DC current which causes L(0) drop –30 %.
*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.
◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This
should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150℃
should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance characteristics (Reference①)
● Inductance vs DC Current
[ ETQP5M1R5YFC ]
[ ETQP5M2R5YFC ]
0.8
0.4
0
10
20
DC Bias (A)
30
2.0
1.5
1.0
0.5
0.0
40
[ ETQP5M4R7YFC ]
0
Inductance (μH)
Inductance (μH)
2
1
25
0
5
10
15
15
10
5
2
4
6
DC Bias (A)
2
1
0
40
0
5
6
4
2
0
2
4
6
8
10
25
30
15
10
5
0
8 10 12 14 16
0
2
4
[ ETQP5M330YFC ]
20
10
0
2
4
6
DC Bias (A)
8
10
60
50
8
10
12
14
[ ETQP5M470YFC ]
40
30
20
10
0
0
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
11
6
DC Bias (A)
30
0
20
DC Bias (A)
[ ETQP5M150YFC ]
8
40
15
10
DC Bias (A)
[ ETQP5M220YFC ]
0
30
3
20
DC Bias (A)
20
0
20
DC Bias (A)
12
10
0
20
Inductance (μH)
Inductance (μH)
3
10
4
[ ETQP5M100YFC ]
6
5
4
0
Inductance (μH)
0.0
3.0
2.5
Inductance (μH)
1.2
[ ETQP5M3R3YFC ]
Inductance (μH)
Inductance (μH)
Inductance (μH)
1.6
2
4
6
DC Bias (A)
8
10
30-Jun-22
Power Choke Coil (Automotive Grade)
Performance characteristics (Reference①)
[ ETQP5M680YFC ]
40
20
3
2
1
0
0
1
2
3
4
5
6
8
7
120
Inductors (μH)
Inductors (μH)
Inductors (μH)
60
0
[ ETQP5M3R3YGC ]
4
80
9
0
5
10
15
20
25
100
80
60
40
20
0
30 35
DC Bias (A)
DC Bias (A)
[ ETQP5M101YGC ]
0
1
2
3
5
4
6
7
DC Bias (A)
Performance characteristics (Reference②)
60
40
20
10
15
20
25
30
20
0
0
5
10
80
[ ETQP5M4R7YFC ]
60
40
20
0
0
4
8
12
16
20
80
40
20
0
0
2
4
8
10
DC Bias (A)
[ ETQP5M680YFC ]
60
40
20
0
0
1
2
3
4
DC Bias (A)
5
6
Temperature rise ΔT(K)
6
80
Temperature rise ΔT(K)
Temperature rise ΔT(K)
Temperature rise ΔT(K)
80
20
4
6
8
10
12
0
4
8
80
60
40
20
0
0
1
2
3
4
5
6
7
DC Bias (A)
[ ETQP5M3R3YGC ]
60
40
20
0
0
5
10
80
16
20
24
[ ETQP5M150YFC ]
60
40
20
0
0
15
20
80
2
4
6
8
10
80
[ ETQP5M470YFC ]
60
40
20
0
0
1
2
3
4
5
DC Bias (A)
6
[ ETQP5M101YGC ]
60
40
20
0
0
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
12
12
DC Bias (A)
[ ETQP5M330YFC ]
40
2
0
DC Bias (A)
60
[ ETQP5M220YFC ]
0
20
DC Bias (A)
60
0
25
[ ETQP5M100YFC ]
DC Bias (A)
80
20
40
DC Bias (A)
Temperature rise ΔT(K)
Temperature rise ΔT(K)
DC Bias (A)
15
Temperature rise ΔT(K)
5
40
[ ETQP5M3R3YFC ]
60
Temperature rise ΔT(K)
0
60
80
Temperature rise ΔT(K)
0
[ ETQP5M2R5YFC]
80
Temperature rise ΔT(K)
[ ETQP5M1R5YFC ]
80
Temperature rise ΔT(K)
Temperature rise ΔT(K)
● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4).*3
PWB condition B : Multilayer PWB with high heat dissipation performance.*2
1
2
3
4
5
DC Bias (A)
30-Jun-22
Power Choke Coil (Automotive Grade)
6. PCC-M1040ML / PCC-M1050ML / PCC-M1060ML series
(ETQP4M□□□KLC / ETQP5M□□□YLC / ETQP6M□□□YLC/KLC)
Standard parts
DCR (at 20 ℃)
(mΩ)
Inductance*1
Part No.
NEW
L0
(μH)
ETQP4MR47KLC
ETQP5MR33YLC
ETQP5MR68YLC
ETQP5M1R0YLC
ETQP5M2R0YLC
ETQP6M1R5YLC
ETQP6M2R5YLC
ETQP6M3R3YLC
ETQP6M4R7YLC
ETQP6M150KLC
Tolerance
Typ. (max.)
(%)
MSL
level
Rated current (A) Typ.
*2
△T= 40 K
Tolerance
(%)
( )*3
△L= –30 %*4
*5
0.47
1.53 (1.68)
31.1 (24.9)
47.3
1
0.33
0.68
1.0
2.0
1.5
2.5
3.3
4.7
14.0
1.1 (1.21)
1.75 (1.93)
2.3 (2.53)
4.6 (5.06)
3.2 (3.52)
4.55 (5.00)
6.0 (6.60)
8.7 (9.57)
28.0 (30.80)
39.7 (33.2)
31.5 (26.3)
27.5 (23.0)
19.4 (16.2)
23.3 (19.5)
19.6 (16.3)
17.0 (14.2)
14.1 (11.8)
7.9(6.5)
56.7
40.0
37.8
31.3
32.0
25.8
26.3
22.5
11.2
1
1
1
1
1
1
1
1
1
±20
±10
Series
[Size (mm)]
PCC-M1040ML
[10.9×10.0×4.0]
PCC-M1050ML
[10.9×10.0×5.0]
PCC-M1060ML
[10.9×10.0×6.0]
*1: Measured at 100 kHz
*2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with
high-heat dissipation (heat dissipation constant 10.9x10.0x5.0 mm : approx. 23 K/W, 10.9x10.0x6.0 mm:approx. 23 K/W).
*3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of
FR4 t=1.6 mm and DC current is applied.
*4: Saturation rated current : DC current which causes L(0) drop –30 %.
*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.
◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This
should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150℃
should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance characteristics (Reference①)
● Inductance vs DC Current
[ ETQP4MR47KLC ]
Inductance (μH)
Inductance (μH)
0.6
0.5
0.4
0.3
0.2
0.1
0.0
0
10
20
30
40
50
60
70
0.3
0.2
0.1
0.0
80
[ ETQP5MR33YLC ]
0.4
0
10
20
30
[ ETQP5MR68YLC ]
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
0
10
20
30
40
50
80
0.6
0.4
0.2
0
10
20
30
40
50
60
DC Bias (A)
[ ETQP5M2R0YLC ]
[ ETQP6M1R5YLC ]
2.0
2.0
Inductance (μH)
Inductance (μH)
70
0.8
0.0
60
1.5
1.0
0.5
0.0
60
[ ETQP5M1R0YLC ]
1.2
1.0
DC Bias (A)
2.5
50
DC Bias (A)
Inductance (μH)
Inductance (μH)
DC Bias (A)
40
0
5
10
15
20
25
30
35
40
45
50
1.5
1.0
0.5
0.0
0
DC Bias (A)
5
10
15
20
25
30
35
40
45
50
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
13
30-Jun-22
Power Choke Coil (Automotive Grade)
Performance characteristics (Reference①)
[ ETQP6M3R3YLC ]
[ ETQP6M2R5YLC ]
Inductance (μH)
Inductance (μH)
3.0
2.5
2.0
1.5
1.0
0.5
0.0
0
10
20
30
40
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
0
DC Bias (A)
5
10
4
3
2
1
0
0
5
10
15
20
25
30
20
25
DC Bias (A)
30
35
40
[ ETQP6M150KLC ]
5
Inductance (μH)
Inductance (μH)
[ ETQP6M4R7YLC ]
15
35
16.0
14.0
12.0
10.0
8.0
6.0
4.0
2.0
0.0
40
DC Bias (A)
0
2
4
6
8
10
12
14
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
14
30-Jun-22
Power Choke Coil (Automotive Grade)
Performance characteristics (Reference②)
[ ETQP4MR47KLC ]
80
Temperature rise ΔT(K)
Temperature rise ΔT(K)
● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4).*3
PWB condition B : Multilayer PWB with high heat dissipation performance.*2
60
40
20
0
0
5
10
15
20
25
30
35
40
45
50
[ ETQP5MR33YLC ]
80
60
40
20
0
0
10
20
60
40
20
5
10
15
20
25
30
35
40
45
60
40
20
0
Temperature rise ΔT(K)
Temperature rise ΔT(K)
[ ETQP5M2R0YLC ]
60
40
20
5
10
15
0
5
10
15
20
25
30
Temperature rise ΔT(K)
Temperature rise ΔT(K)
60
40
20
0
4
8
12
16
20
24
28
0
0
5
10
15
Temperature rise ΔT(K)
Temperature rise ΔT(K)
20
25
[ ETQP6M3R3YLC ]
80
60
40
20
0
0
5
10
15
20
25
[ ETQP6M150KLC ]
60
40
20
10
35
20
[ ETQP6M4R7YLC ]
5
30
40
DC Bias (A)
80
0
35
60
DC Bias (A)
0
30
DC Bias (A)
[ ETQP6M2R5YLC ]
0
25
[ ETQP6M1R5YLC ]
80
DC Bias (A)
80
20
DC Bias (A)
80
0
60
80
DC Bias (A)
0
50
[ ETQP5M1R0YLC ]
Temperature rise ΔT(K)
Temperature rise ΔT(K)
[ ETQP5MR68YLC ]
80
0
40
DC Bias (A)
DC Bias (A)
0
30
15
20
DC Bias (A)
80
60
40
20
0
0
2
4
6
8
10
12
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
15
30-Jun-22
Power Choke Coil (Automotive Grade)
Dimensions in mm (not to scale)
Dimensional tolerance unless noted : ±0.5
Series PCC-M0530M
Series PCC-M0540M
Series PCC-M0630M
Series PCC-M0645M
(ETQP3M□□□YFP/ETQP4M□□□YFP)
(ETQP3M□□□YFN/ETQP4M□□□YFN)
Inductance
Suffix
Inductance
5.5±0.4
Polarity
1.2
1.2
3.0±0.3
6.0±0.4
3.0±0.3
5.0±0.4
Date Code
Suffix
6.5±0.4
Date Code
Polarity
1.5
Series
H
M0530M
3.0 max.
M0540M
4.0 max.
H
3.0 max.
M0645M
4.5 max.
Series PCC-M0854M
Series PCC-M0850M
(ETQP5M□□□YFM/YGM)
(ETQP5M□□□YFK/YGK)
Inductance
Suffix
Suffix
Polarity
2.0
2.0
Date Code
3.0±0.3
8.0±0.4
3.0±0.3
8.5±0.4
7.0±0.4
Date Code
Series
M0630M
Series PCC-M0754M
Series PCC-M0750M
Inductance
7.5±0.4
Polarity
2.0
Series
H
M0754M
5.4 max.
M0750M
5.0 max.
Series PCC-M1054M
Series PCC-M1050M
Series
H
M0854M
5.4 max.
M0850M
5.0 max.
Series PCC-M1040ML
(ETQP4M□□□KLC)
(ETQP5M□□□YFC/YGC)
Suffix
Suffix
Inductance
10.7±0.5
Polarity
2.0
2.0
10.0±0.4
10.0±0.4
4.2±0.3
10.9±0.6
Date Code
4.7±0.3
Inductance
2.0
Unit : mm
0.1 min.
H
0.1 min.
H
Unit : mm
Date Code
1.5
Unit : mm
0.05 min.
H
0.05 min.
H
Unit : mm
Polarity
2±0.5
2±0.5
M1054M
5.4 max.
M1050M
5.0 max.
Unit : mm
H
H
0.05 min.
0.1 min.
H
Unit : mm
Series
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
16
Series
H
M1040ML
4.0 max.
30-Jun-22
Power Choke Coil (Automotive Grade)
Dimensions in mm (not to scale)
10.9±0.6
10.0±0.4
Series PCC-M1050ML
Series PCC-M1060ML
(ETQP5M□□□YLC/ETQP6M□□□YLC/KLC)
Series
H
5.0 max.
M1060ML
6.0 max.
Polarity
1.8
0.05 min.
Date Code
M1050ML
Suffix
7.3±0.3
Inductance
1.8
H
Dimensional tolerance unless noted : ±0.5
Recommended land pattern in mm (not to scale)
Dimensional tolerance unless noted : ±0.5
(ETQP3M□□□YFN/ETQP4M□□□YFN)
7.1
(ETQP5M□□□YFM/YGM)
8.0
8.4
3.6
6.0
3.6
6.1
Series PCC-M0754M
Series PCC-M0750M
3.6
(ETQP3M□□□YFP/ETQP4M□□□YFP)
Series PCC-M0630M
Series PCC-M0645M
7.0
Series PCC-M0530M
Series PCC-M0540M
2.2
2.8
2.8
8.8
Series PCC-M0854M
Series PCC-M0850M
Series PCC-M1040ML
11.7
11.9
(ETQP4M□□□KLC)
(ETQP5M□□□YFC/YGC)
4.0
9.0
9.4
4.8
11.0
(ETQP5M□□□YFK/YGK)
10.0
Series PCC-M1054M
Series PCC-M1050M
3.8
6.1
12.4
13.7
Series PCC-M1050ML
Series PCC-M1060ML
5.0
11.0
7.2
5.8
12.7
(ETQP5M□□□YLC/ETQP6M□□□YLC/KLC)
11.9
11.0
7.9
※Don't wire on the pattern on shaded portion the PWB.
Unit : mm
■ As for soldering conditions and safety precautions
(Power choke coils (Automotive grade)),
please see data files
6.5
13.9
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
17
30-Jun-22
Power Choke Coil (Automotive Grade)
Packaging methods (Taping)
● Embossed carrier tape
P0
t1
E
P2
B
W
F
A
P1
Series
PCC-M0530M
PCC-M0540M
PCC-M0630M
PCC-M0645M
PCC-M0754M/M0750M
PCC-M0854M/M0850M
PCC-M1054M/M1050M
PCC-M1040ML/M1050ML/M1060ML
t2
Tape running direction
A
B
5.6
6.1
7.1
6.6
8.1
9.1
7.6
8.6
10.65 11.75
W
16.0
24.0
E
1.75
F
P1
7.5
12.0
11.5
P2
P0
øD0
2.0
4.0
1.5
16.0
Unit : mm
t1
t2
3.3
4.3
3.3
5.0
0.4
6.0
0.5
6.35
● Taping reel
Unit : mm
E
B
C
øD
W
Serise
PCC-M0530M/M0540M
PCC-M0630M/M0645M
PCC-M0754M/M0750M
PCC-M0854M/M0850M
PCC-M1054M/M1050M
PCC-M1040ML/M1050ML/M1060ML
A
B
C
øD
E
330
100
13
21
2
W
17.5
25.5
A
Serise
M0630M/M0645M
M0754M/M0750M
M0854M/M0850M
Serise
M0530M/M0540M
M1054M/M1050M
M1040ML/M1050ML
M1060ML
Terminal
Parts mounting (Taping)
Terminal
Standard packing quantity / Reel
Serise
PCC-M0530M
PCC-M0540M
PCC-M0630M
PCC-M0645M
PCC-M0754M
PCC-M0750M
PCC-M0854M
PCC-M0850M
PCC-M1054M
PCC-M1050M
PCC-M1040ML
PCC-M1050ML
PCC-M1060ML
Part No.
ETQP3M□□□YFP
ETQP4M□□□YFP
ETQP3M□□□YFN
ETQP4M□□□YFN
ETQP5M□□□YFM
ETQP5M□□□YGM
ETQP5M□□□YFK
ETQP5M□□□YGK
ETQP5M□□□YFC
ETQP5M□□□YGC
ETQP4M□□□KLC
ETQP5M□□□YLC
ETQP6M□□□YLC/KLC
Minimum quantity / Packing unit
Quantity per reel
2,000 pcs / box (2 reel)
1,000 pcs
1,000 pcs / box (2 reel)
500 pcs
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
18
12-Nov-21
UPDATE
Power Inductors
Power Choke Coil (Automotive Grade)
PCC-M0854MS series
PCC-M1050MS series
High heat resistance and high reliability using metal composite core (MC)
Industrial property : Patents 18 (Registered 10 / Pending 8)
Features
●The vibration-resistant structure achieves a vibration acceleration-resistance of 50 G or higher
in 150 ℃ environments
●Reduce core loss in high frequency band (More than 2 MHz)
●High heat resistance
: Operation up to 150 ℃ including self-heating
●SMD type
: High vibration resistance as result of newly developed integral construction;
●High-reliability
under severe reliability conditions of automotive and other strenuous
applications
: Excellent inductance stability using ferrous alloy magnetic material
●High bias current
: Excellent inductance stability over broad temp. range
●Temp. stability
: A gapless structure achieved with metal composite core
●Low audible (buzz) noise
: Low DC resistance of winding and low eddy-current loss of the core
●High efficiency
●Shielded construction
●AEC-Q200 compliant
●RoHS compliant
Recommended applications
●ECU placed in the engine itself, mechanical-electrical-integrated ECU
●Noise filter for various drive circuitry requiring high temp. operation and peak current handling capability
●Boost-Converter, Buck-Converter DC/DC
Standard packing quantity (Minimum quantity/Packing unit)
● 1,000 pcs/box (2 reel)
Temperature rating
1
2
3
4
E
T
Q
P
Product code
Classification
5
6
7
8
9
M
Height
Inductance
Winding
Code
R68
10
11
Y
S
Core
Suffix
Inductance
0.68 μH
12
Size
Code
Size
K
□ 8 mm
C
□ 10 mm
Temperature rating
Operating temperature range
After PWB mounting
Storage condition
Before PWB mounting
Tc : -40 ℃ to +150 ℃ (Including self-temperature rise)
Ta : -5 ℃ to +35 ℃ 85%RH max.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
19
12-Nov-21
Power Choke Coil (Automotive Grade)
Standard parts
DCR (at 20 ℃)
(mΩ)
Inductance*1
Part No.
L0
(μH)
Tolerance
△T= 40 K*2
Tolerance
Typ. (max.)
(%)
MSL
level
Rated current (A) Typ.
(%)
( )*3
△L= –30 %*4
*5
ETQP5M2R5YSK
2.45
7.4 (8.14)
14.1 (12.0)
21.7
1
ETQP5MR68YSC
0.68
1.66 (1.83)
32.3 (27.0)
40.0
1
NEW
1.90
19.8 (16.5)
29.8
1
6.2 (5.2)
7.9
1
ETQP5M2R0YSC
20.00
▲ETQP5M220YSC
4.45 (4.90)
±20
45.50 (50.05)
44.00
▲ETQP5M470YSC
102.00 (112.20)
2.50
▲ETQP6M2R5YSC
±10
4.1 (3.4)
PCC-M0854MS
[8.5×8.0×5.4]
PCC-M1050MS
[10.9×10.0×5.0]
PCC-M1056MS
[10.9×10.0×5.6]
PCC-M1054MS
1
5.6
19.7 (16.4)
4.48 (4.93)
Series
[Size (mm)]
[10.9×10.0×5.4]
PCC-M1060MS
1
23.7
[10.9×10.0×6.0]
▲ Under development
*1: Measured at 100 kHz
*2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with
high-heat dissipation (heat dissipation constant 8.5x8.0x5.4 mm : approx. 30 K/W, 10.9x10.0x5.0 mm : approx. 20 K/W).
*3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of
FR4 t=1.6 mm and DC current is applied.
*4: Saturation rated current : DC current which causes L(0) drop –30 %.
*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.
◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This
should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150℃
should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance characteristics (Reference①)
● Inductance vs DC Current
[ ETQP5M2R5YSK ]
2.5
0.6
2.0
0.5
1.5
1.0
0.5
0.0
0
5
10
15
[ ETQP5MR68YSC ]
0.7
Inductance (μH)
Inductance (μH)
3.0
20
25
0.4
0.3
0.2
0.1
0.0
30
0
10
20
DC Bias (A)
[ ETQP5M2R0YSC ]
1.5
1.0
0.5
20
10
0
15.0
10.0
5.0
0.0
50
40
30
20.0
DC Bias (A)
Inductance (μH)
Inductance (μH)
30.0
20.0
10.0
2
3
4
5
10
3.0
40.0
1
8
[ ▲ETQP5M2R5YSC ]
[▲ ETQP5M470YSC ]
0
6
4
2
0
DC Bias (A)
50.0
0.0
50
[ ▲ETQP5M220YSC ]
2.0
0.0
40
25.0
Inductance (μH)
Inductance (μH)
2.5
30
DC Bias (A)
6
7
8
2.0
1.0
0.0
9
DC Bias (A)
0
5
10
15
20
25
30
35
40
DC Bias (A)
▲ Under development
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
20
12-Nov-21
Power Choke Coil (Automotive Grade)
Performance characteristics (Reference②)
● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4), See also ✽2
PWB condition B : Multilayer PWB with high heat dissipation performance. See also ✽3
[ ETQP5M2R5YSK ]
[ ETQP5MR68YSC ]
80
Temperature rise ΔT(K)
Temperature rise ΔT(K)
80
60
40
20
0
0
2
4
6
8
10
12
14
16
18
20
60
40
20
0
0
5
10
15
Temperature rise ΔT(K)
Temperature rise ΔT(K)
60
40
20
5
15
10
25
20
30
40
20
10
0
1
0
3
2
Temperature rise ΔT(K)
Temperature rise ΔT(K)
5
6
25
30
[ ▲ETQP6M2R5YSC ]
50
30
20
10
2
4
DC Bias (A)
40
1
45
30
[ ▲ETQP5M470YSC ]
0
40
50
DC Bias (A)
0
35
[ ▲ETQP5M220YSC ]
[ ETQP5M2R0YSC ]
0
30
DC Bias (A)
80
0
25
20
DC Bias (A)
3
4
5
80
60
40
20
0
5
0
15
10
20
DC Bias (A)
DC Bias (A)
▲ Under development
Dimensions in mm (not to scale)
Dimensional tolerance unless noted : ±0.5
Series PCC-M1050MS/54MS/56MS
Series PCC-M1060MS
Series PCC-M0854MS
(ETQP5M□□□YSK)
10.0±0.4
5.08±0.3
Polarity
1.8
0.05 min.
1.3
5.4 max.
1.3
1.8
H
Date Code
Polarity
0.1 min.
Date Code
Suffix
7.3±0.3
Inductance
10.9±0.6
Suffix
8.0±0.4
Inductance
8.5±0.4
(ETQP5M□□□YSC/ETQP6M□□□YSC)
Unit : mm
Series
H
M105□MS
5.0/5.4/5.6 max.
M1060MS
6.0 max.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
21
12-Nov-21
Power Choke Coil (Automotive Grade)
Recommended land pattern in mm (not to scale)
Dimensional tolerance unless noted : ±0.5
Series PCC-M1050MS/54MS/56MS
Series PCC-M1060MS
Series PCC-M0854MS
(ETQP5M□□□YSC/ETQP6M□□□YSC)
11.9
6
9
7.9
9.5
4.826
10.5
11
(ETQP5M□□□YSK)
6.5
13.9
※Don't wire on the pattern on shaded portion the PWB.
Unit : mm
■ As for soldering conditions and safety precautions (Power choke coils (Automotive grade)),
please see data files
Packaging methods (Taping)
● Embossed Carrier Tape Dimensions in mm (not to scale)
P0
t1
E
P2
B
W
F
A
P1
Series
A
9.1
PCC-M0854MS
PCC-M105□MS/M1060MS
10.65
t2
Tape running direction
B
8.6
11.75
W
16.0
24.0
E
1.75
F
7.5
11.5
P1
12.0
16.0
P2
P0
øD0
t1
0.4
0.5
2.0
4.0
1.5
A
B
C
øD
E
330
100
13
21
2
Unit : mm
t2
6.0
6.35
● Taping Reel Dimensions in mm (not to scale)
B
E
C
øD
W
Standard Reel Dimensions
Series
PCC-M0854MS
PCC-M105□MS/M1060MS
Unit : mm
W
17.5
25.5
A
Component placement (Taping)
Serise PCC-M105□MS/M1060MS
Terminal
Serise PCC-M0854MS
Terminal
Standard packing quantity / Reel
Serise
PCC-M0854MS
PCC-M105□MS
PCC-M1060MS
Part No.
ETQP5M
YSK
ETQP5M
YSC
ETQP6M
YSC
Minimum quantity / Packing unit
1,000 pcs / box (2 reel)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
22
Quantity per reel
500 pcs
12-Nov-21
UPDATE
Power Inductors
Power Choke Coil (Automotive Grade)
PCC-M1280MF series
PCC-M15A0MF series
High heat resistance and high reliability using metal composite core (MC)
Industrial property : Patents 3
Features
●High heat resistance
: Operation up to 160 ℃ including self-heating
●Large current power
:53 A (M1280MF R33 type), 87 A (M15A0MF R33 type)
●High vibration resistance
:30 G
●SMD type
: High vibration resistance as result of newly developed integral construction ;
●High-reliability
under severe reliability conditions of automotive and other strenuous
applications
●High bias current
: Excellent inductance stability using ferrous alloy magnetic material
●Temp. stability
: Excellent inductance stability over broad temp. range
●Low audible (buzz) noise
: A gapless structure achieved with metal composite core
●High efficiency
: Low DC resistance of winding and low eddy-current loss of the core
●Shielded construction
●AEC-Q200 compliant
●RoHS compliant
Recommended applications
●Noise filter for various drive circuitry requiring high temp. operation and peak current handling capability
●Boost-Converter, Buck-Converter DC/DC
Standard packing quantity (Minimum quantity/Packing unit)
● 500 pcs/box (2 reels): PCC-M1280MF series (ETQP8M□□□JFA)
● 200 pcs/box (2 reels): PCC-M15A0MF series (ETQPAM□□□JFW)
Explanation of part numbers
1
2
3
4
E
T
Q
P
Product Code
5
6
7
8
9
M
Classification
Height
Winding
Inductance
10
11
J
F
Core
Suffix
12
Size
(Example)
Code
Height
Code
8
8 mm
R33
Inductance
0.33 μH
Code
A
□ 12 mm
Size
A
10.5 mm
R68
0.68 μH
W
□ 15 mm
4R7
4.7 μH
Temperature rating
Operating temperature range
Storage condition
After PWB mounting
Before PWB mounting
Tc : -40 ℃ to +160 ℃ (Including self-temperature rise)
Ta : -5 ℃ to +35 ℃ 85%RH max.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
23
12-Jan-22
Power Choke Coil (Automotive Grade)
1. PCC-M1280MF series
Standard parts
Inductance*1
Part No.
▲ETQP8MR33JFA
ETQP8MR68JFA
ETQP8M1R0JFA
ETQP8M1R5JFA
ETQP8M2R5JFA
ETQP8M3R3JFA
ETQP8M4R7JFA
L0
(μH)
Tolerance
(%)
0.33
0.68
1.0
1.5
2.5
3.3
4.7
±20
DCR (at 20 ℃)
(mΩ)
△T= 40 K*2
Tolerance
Typ. (max.)
(%)
0.7 (0.77)
1.1 (1.21)
1.36 (1.50)
1.8 (1.98)
2.6 (2.86)
3.6 (3.96)
4.9 (5.39)
MSL
level
Rated current (A) Typ.
( )*3
53.5 (44.4)
42.6 (35.4)
38.3 (31.8)
33.3 (27.7)
27.7 (23.0)
23.6 (19.6)
20.2 (16.8)
±10
△L= –30 %*4
*5
84.5
56.9
44.4
29.9
32.1
27.6
24.7
1
1
1
1
1
1
1
Series
[Size (mm)]
PCC-M1280MF
[12.6×13.2×8.0]
PCC-M1280MF
[12.6×13.1×8.0]
▲ This spec may change because these are under development
*1: Measured at 100 kHz
*2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with
high-heat dissipation (heat dissipation constant : approx. 20 K/W).
*3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of
FR4 t=1.6 mm and DC current is applied.
*4: Saturation rated current : DC current which causes L(0) drop –30 %.
*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.
◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This
should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +160°C
should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance characteristics (Reference①)
● Inductance vs DC Current
[ ETQP8MR68JFA ]
[▲ ETQP8MR33JFA ]
0.25
0.20
0.15
0.10
Inductors (μH)
Inductors (μH)
Inductors (μH)
1.2
0.6
0.30
0.5
0.4
0.3
0.2
0.1
0.05
0.00
0
20
40
60
80
100 120
0.0
140 160
0
20
40
DC Bias (A)
[ ETQP8M1R5JFA ]
80
0.5
30
40
0
10
20
50
60
DC Bias (A)
40
50
60
70
80
[ ETQP8M3R3JFA ]
3.0
2.5
2.0
1.5
1.0
0.0
30
3.5
0.5
20
0.2
DC Bias (A)
Inductors (μH)
1.0
10
0.4
[ ETQP8M2R5JFA ]
1.5
0
0.8
0.6
0.0
100
3.0
Inductors (μH)
Inductors (μH)
60
1.0
DC Bias (A)
2.0
0.0
[ ETQP8M1R0JFA ]
0.7
0.40
0.35
2.5
2.0
1.5
1.0
0.5
0
10
20
30
40
50
60
0.0
0
10
DC Bias (A)
20
30
40
50
DC Bias (A)
[ ETQP8M4R7JFA ]
5
Inductors (μH)
4
3
2
▲ Under development
1
0
0
10
20
30
40
50
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
24
12-Jan-22
Power Choke Coil (Automotive Grade)
Performance characteristics (Reference②)
● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4).*3
PWB condition B : Multilayer PWB with high heat dissipation performance.*2
60
40
20
0
10
20
30
40
50
60
70
80
Temperature rise ΔT(K)
80
0
60
40
20
0
80
0
10
20
40
20
20
30
50
60
40
20
0
0
10
20
40
50
DC Bias (A)
60
40
20
0
5
10
15
20
25
40
50
60
[ ETQP8M3R3JFA ]
80
0
30
DC Bias (A)
Temperature rise ΔT(K)
60
10
40
60
[ ETQP8M2R5JFA ]
Temperature rise ΔT(K)
Temperature rise ΔT(K)
[ ETQP8M1R5JFA ]
80
0
30
80
DC Bias (A)
DC Bias (A)
0
[ ETQP8M1R0JFA ]
[ ETQP8MR68JFA]
Temperature rise ΔT(K)
Temperature rise ΔT(K)
[ ▲ ETQP8MR33JFA ]
30
35
40
80
60
40
20
0
0
DC Bias (A)
5
10
15
20
25
30
35
DC Bias (A)
Temperature rise ΔT(K)
[ ETQP8M4R7JFA ]
80
60
40
▲ Under development
20
0
0
5
10
15
20
25
30
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
25
12-Jan-22
NEW
2. PCC-M15A0MF series
Standard parts
Inductance*1
Part No.
ETQPAMR33JFW
▲ETQPAMR68JFW
▲ETQPAM1R0JFW
▲ETQPAM1R5JFW
▲ETQPAM2R5JFW
▲ETQPAM3R3JFW
▲ETQPAM4R7JFW
L0
(μH)
0.33
0.68
1.0
1.5
2.5
3.3
4.7
Power Choke Coil (Automotive Grade)
Tolerance
(%)
±20
DCR (at 20 ℃)
(mΩ)
Typ. (max.)
0.42 [0.48]
(0.72 [0.83])
(0.92 [1.06])
(1.10 [1.21])
(1.70 [1.87)
(2.00 [2.20])
(3.00 [3.30])
MSL
level
Rated current (A) Typ.
Tolerance
(%)
±15
(±15)
(±10)
*2
△T= 40 K
( )*3
83 [69]
(64 [53])
(56 [46])
(51 [42])
(41 [34])
(38 [32])
(31 [26])
△L= –30 %*4
*5
103
(71)
(52)
(43)
(41)
(37)
(30)
1
1
1
1
1
1
1
Series
[Size (mm)]
PCC-M15A0MF
[15.6×17.2×10.5]
▲ This spec may change because these are under development
*1: Measured at 100 kHz
*2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with
high-heat dissipation (heat dissipation constant : approx. 13.8 K/W).
*3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of
FR4 t=1.6 mm and DC current is applied.
*4: Saturation rated current : DC current which causes L(0) drop –30 %.
*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.
◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This
should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +160°C
should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance characteristics (Reference①)
● Inductance vs DC Current
[ ▲ETQPAMR68JFW]
DC Bias (A)
DC Bias (A)
[ ▲ETQPAM1R5JFW ]
DC Bias (A)
[ ▲ETQPAM2R5JFW ]
[ ▲ETQPAM3R3JFW ]
Inductors (μH)
Inductors (μH)
Inductors (μH)
DC Bias (A)
[ ▲ETQPAM1R0JFW ]
Inductors (μH)
Inductors (μH)
Inductors (μH)
[ ETQPAMR33JFW ]
DC Bias (A)
DC Bias (A)
Inductors (μH)
[ ▲ETQPAM4R7JFW ]
▲ This spec may change because these are under development
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
26
12-Jan-22
Power Choke Coil (Automotive Grade)
Performance characteristics (Reference②)
● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4).*3
PWB condition B : Multilayer PWB with high heat dissipation performance.*2
[ ▲ETQPAMR68JFW]
DC Bias (A)
DC Bias (A)
DC Bias (A)
[ ▲ETQPAM2R5JFW ]
[ ▲ETQPAM3R3JFW ]
DC Bias (A)
Temperature rise ΔT(K)
Temperature rise ΔT(K)
Temperature rise ΔT(K)
[ ▲ETQPAM1R5JFW ]
[ ▲ETQPAM1R0JFW ]
Temperature rise ΔT(K)
Temperature rise ΔT(K)
Temperature rise ΔT(K)
[ ETQPAMR33JFW ]
DC Bias (A)
DC Bias (A)
Temperature rise ΔT(K)
[ ▲ETQPAM4R7JFW ]
▲ This spec may change because these are under development
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
27
12-Jan-22
Power Choke Coil (Automotive Grade)
Dimensions in mm (not to scale)
Dimensional tolerance unless noted : ±0.5
・ETQP8MR33JFA
・ETQPAMR33JFW
・▲ETQPAM2R5JFW
・ETQP8MR68JFA
・▲ETQPAMR68JFW
・▲ETQPAM3R3JFW
・ETQP8M1R0JFA
・▲ETQPAM1R0JFW
・▲ETQPAM4R7JFW
・ETQP8M1R5JFA
・▲ETQPAM1R5JFW
Inductance
Inductance
12.6±0.5
15.6 ± 0.5
R33
17.2 ± 0.5
Data code
10.5 max.
8.0 max.
0.05 min.
Data code
※ The mounting terminal should not protrude from C
0.05 min.
13.2±0.5
R68
※ The mounting terminal should not protrude from C
Unit : mm
Unit : mm
Part No.
A
B
C
Part No.
A
B
C
ETQP8MR33JFA
2.2±0.4
(6.4)
3.10±0.15
ETQPAMR33JFW
3.1±0.8
(5.6)
5.0±0.16
ETQP8MR68JFA
2.0±0.4
(7.1)
2.75±0.16
▲ETQPAMR68JFW
(2.8)
(5.6)
(5.0)
ETQP8M1R0JFA
2.0±0.4
(7.1)
2.75±0.16
▲ETQPAM1R0JFW
(2.8)
(5.6)
(5.0)
ETQP8M1R5JFA
2.0±0.4
(7.1)
2.75±0.16
▲ETQPAM1R5JFW
(2.8)
(5.6)
(5.0)
▲ETQPAM2R5JFW
(2.2)
(9.2)
(3.2)
▲ETQPAM3R3JFW
(2.2)
(9.2)
(3.2)
▲ETQPAM4R7JFW
(1.5)
(9.2)
(3.2)
▲ This spec may change because these are under development
A : Terminal width
・ETQP8M2R5JFA
・ETQP8M3R4JFA
・ETQP8M4R7JFA
B : Convex part on the bottom of the product
C : Terminal storage portion
Inductance
13.1±0.5
12.6±0.5
Unit : mm
3R3
Part No.
A
B
C
ETQP8M2R5JFA
1.8±0.4
(7.7)
2.45±0.10
ETQP8M3R3JFA
1.5±0.4
(8.1)
2.25±0.14
ETQP8M4R7JFA
1.25±0.4
(8.1)
2.25±0.14
0.05 min.
8.0 max.
Data code
※ The mounting terminal should not protrude from C
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
28
12-Jan-22
Power Choke Coil (Automotive Grade)
Recommended land pattern in mm (not to scale)
Dimensional tolerance unless not
・ETQP8MR33JFA
・ETQP8M4R7JFA
10
・ETQP8M3R3JFA
10
3.2
3.4
7.2
Recommend
copper pad area
2.0
13.6
Recommend
resist opening area
・ETQP8M2R5JFA
5.4
14.8
5.4
7.0
Recommend
copper pad area
2.0
13.8
Recommend
resist opening area
Don't wire this portion with PWB.
Don't wire this portion with PWB.
10
20
4.0
5.4
5.4
20
4.0
14.8
5.4
14.8
20
5.5
2.0
13.5
10
5.4
4.0
Recommend
copper pad area
Recommend
resist opening area
Don't wire this portion with PWB.
・ETQP8MR68JFA
・ETQP8M1R0JFA
・ETQP8M1R5JFA
10
10
10
4.0
5.4
5.4
4.0
14.8
20
4.0
14.8
5.4
5.4
3.7
20
10
10
4.0
10
6.7
2.0
14.1
6.2
Recommend
copper pad area
Recommend
resist opening area
Don't wire this portion with PWB.
・ETQPAMR33JFW
・▲ETQPAMR68JFW
・▲ETQPAM1R0JFW
・▲ETQPAM1R5JFW
2.0
Recommend
copper pad area
Recommend
resist opening area
14.2
Don't wire this portion with PWB.
・▲ETQPAM2R5JFW
・▲ETQPAM3R3JFW
・▲ETQPAM4R7JFW
▲ This spec may change because these are under development
2
4.6
17.8
25
Recommend
resist opening area
Recommend
copper pad area
4 layer
PCB/capper
thicness:70um
7.5
16.7
Don't wire this portion with PWB.
31
UNit : mm
■ As for soldering conditions and safety precautions (Power choke coils (Automotive grade)),
please see data files
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
29
12-Jan-22
Power Choke Coil (Automotive Grade)
Packaging methods (Taping)
● Embossed carrier tape dimensions in mm (not to scale)
PCC-M1280MF
20.0±0.2
17.7±0.5
A-A’ cross section
-0.05
12.9±0.5
1.5+0.1
D
P0:28±0.2
D2x:1.5 +0.10
0
D part D
detail
F:14.2±0.1
P3:28.4±0.1
W:32±0.3
13.35±0.5
0.5
9.6±0.5
D part detail
B-B’ cross section
A
A
D
P2:2±0.2
B
B
D2y:1.7 +0.15
1.7 +0.15
-0.05
B
A-A’ cross section
P1:4±0.2
D1:ø1.5 ±0.1
0
E:1.75±0.1
1.75±0.1
(P4:0±0.2)
28.4±0.1
32±0.3
A'
4±0.2
2±0.2
PCC-M15A0MF
T:0.5
K0:11.2±0.2
16.5+0.5
B-B’ cross section
Unit : mm
● Taping reel dimensions in mm (not to scale)
E
B
C
øD
W
A
Standard reel dimensions
Series
A
B
C
øD
E
W
PCC-M1280MF
PCC-M15A0MF
330
330
(100)
(100)
13
13
21
21
2
2
33.5
33.5
Unit : mm
Parts mounting (Taping)
Terminal
Terminal
Tape running direction
Standard packing quantity / Reel
Serise
PCC-M1280MF
PCC-M15A0MF
Part No.
ETQP8M□□□JFA
ETQPAM□□□JFW
Minimum quantity / Packing unit
500 pcs / box (2 reels)
200 pcs / box (2 reels)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
30
Quantity per reel
250 pcs
100 pcs
12-Jan-22
UPDATE
Power Inductors
Power Choke Coil (Automotive Grade)
PCC-M0530M-LP, PCC-M0630M-LP series
PCC-M0840M-LP, PCC-M1040M-LP series
High heat resistance and high reliability using metal composite core (MC)
Industrial property : Patents 3 (Registered 2 / Pending 1)
Features
●High heat resistance
●Low profile
: Operation up to 155 ℃ including self-heating
: 3mm max. height (PCC-M0530M-LP, PCC-M0630M-LP)
4mm max. height (PCC-M0840M-LP, PCC-M1040M-LP)
●SMD type
●High-reliability
: High vibration resistance as result of newly developed integral construction ;
under severe reliability conditions of automotive and other strenuous
applications
: Excellent inductance stability using ferrous alloy magnetic material
: Excellent inductance stability over broad temp. range
: A gapless structure achieved with metal composite core
: Low DC resistance of winding and low eddy-current loss of the core
●High bias current
●Temp. stability
●Low audible (buzz) noise
●High efficiency
●Shielded construction
●AEC-Q200 compliant
●RoHS compliant
Recommended applications
●Noise filter for various drive circuitry requiring high temp. operation and peak current handling capability
●Boost-Converter, Buck-Converter DC/DC
Standard packing quantity (Minimum quantity/Packing unit)
●4,000 pcs/box (2 reel) : PCC-M0530M-LP, M0630M-LP
●1,000 pcs/box (2 reel) : PCC-M0840M-LP, M1040M-LP
Explanation of part numbers
1
2
3
4
E
T
Q
P
Product code
5
Classification
6
7
8
9
M
Height
Inductance
Winding
10
11
K
V
Core
Suffix
12
Size
(Example)
Code
4R7
220
R68
Inductance
4.7 μH
22 μH
0.68 μH
Code
P
N
K
C
Size
□ 5 mm
□ 6 mm
□ 8 mm
□ 10 mm
Temperature rating
Operating temperature range
Storage condition
After PWB mounting
Before PWB mounting
Tc : -55 ℃ to +155 ℃ (Including self-temperature rise)
Ta : -5 ℃ to +35 ℃ 85%RH max.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
31
30-Jun-22
Power Choke Coil (Automotive Grade)
1. PCC-M0530M-LP series (ETQP3M□□□KVP)
Standard parts
DCR (at 20 ℃)
(mΩ)
Inductance*1
Part No.
L0
(μH)
Tolerance
(%)
10.0
6.8
4.7
3.3
2.2
1.5
1.0
0.68
0.47
0.33
ETQP3M100KVP
ETQP3M6R8KVP
ETQP3M4R7KVP
ETQP3M3R3KVP
ETQP3M2R2KVP
ETQP3M1R5KVP
ETQP3M1R0KVP
ETQP3MR68KVP
NEW ETQP3MR47KVP
ETQP3MR33KVP
(%)
96.0 (105.60)
65.7 (72.27)
45.6 (50.16)
27.3 (30.03)
20.0 (22.00)
12.0 (13.20)
9.6 (10.56)
7.6 (8.36)
5.8 (6.38)
4.85 (5.34)
±20
△T= 40 K*2
Tolerance
Typ. (max.)
MSL
level
Rated current (A) Typ.
( )*3
2.9 (2.4)
3.5 (2.9)
4.1(3.4)
5.4 (4.4)
6.3 (5.2)
8.1 (6.7)
9.0 (7.5)
10.2 (8.4)
11.6 (9.6)
12.7 (10.6)
±10
△L= –30 %*4
*5
4.2
6.1
6.7
8.0
10.1
12.0
14.1
15.9
17.9
21.8
1
1
1
1
1
1
1
1
1
1
Series
[Size (mm)]
PCC-M0530M-LP
[5.5×5.0×3.0]
*1: Measured at 100 kHz
*2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with
high-heat dissipation (heat dissipation constant 5.5 x 5.0 x 3.0 mm : approx. 51 K/W).
*3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of
FR4 t=1.6 mm and DC current is applied.
*4: Saturation rated current : DC current which causes L(0) drop –30 %.
*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.
◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This
should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +155°C
should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance characteristics (Reference①-1)
● Inductance vs DC Current
[ ETQP3M100KVP ]
4
4
DC Bias (A)
6
1.2
Inductors (μH)
Inductors (μH)
1.0
4
8
DC Bias (A)
12
[ ETQP3M1R0KVP ]
0.8
0.4
0
0
10
DC Bias (A)
20
0
2
4
6
DC Bias (A)
8
2
0
[ ETQP3M2R2KVP ]
2
4
6
DC Bias (A)
8
12
10
[ ETQP3M1R5KVP ]
2.0
1.5
1.0
0.5
0
4
8
12
DC Bias (A)
0.4
0.2
10
20
DC Bias (A)
1.0
0.5
0
30
4
12
16
20
0.4
0.3
0.2
0.1
0
0
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
32
8
DC Bias (A)
[ ETQP3MR47KVP ]
0.5
0.6
0
1.5
0
16
[ ETQP3MR68KVP ]
0.8
0
3
0
10
2.0
0
16
Inductors (μH)
Inductors (μH)
2.0
4
1
2.5
3.0
0
2
0
8
[ ETQP3M3R3KVP ]
0
4
Inductors (μH)
2
6
Inductors (μH)
0
[ ETQP3M4R7KVP ]
5
Inductors (μH)
8
0
[ ETQP3M6R8KVP ]
8
Inductors (μH)
Inductors (μH)
12
10
20
DC Bias (A)
30
40
30-Jun-22
Power Choke Coil (Automotive Grade)
Performance characteristics (Reference①-2)
● Inductance vs DC Current
[ ETQP3MR33KVP ]
Inductors (μH)
0.4
0.3
0.2
0.1
0
0
4
8
12
DC Bias (A)
16
20
Performance characteristics (Reference②)
● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4).*3
PWB condition B : Multilayer PWB with high heat dissipation performance.*2
[ ETQP3M100KVP ]
[ ETQP3M6R8KVP ]
40
20
0
0
1
2
3
4
60
40
20
0
5
Temperature rise ΔT(K)
60
0
1
2
DC Bias (A)
4
6
60
40
20
0
8
0
2
DC Bias (A)
20
4
8
12
DC Bias (A)
Temperature rise ΔT(K)
6
2
20
4
8
5
6
[ ETQP3M1R5KVP ]
40
20
0
2
4
6
8
10
12
12
[ ETQP3MR47KVP ]
80
40
0
4
DC Bias (A)
60
0
3
60
0
8
Temperature rise ΔT(K)
40
0
4
[ ETQP3MR68KVP ]
80
Temperature rise ΔT(K)
Temperature rise ΔT(K)
60
0
1
DC Bias (A)
[ ETQP3M1R0KVP ]
80
0
80
Temperature rise ΔT(K)
Temperature rise ΔT(K)
Temperature rise ΔT(K)
20
2
20
DC Bias (A)
[ ETQP3M2R2KVP ]
40
0
40
0
5
80
60
0
4
60
DC Bias (A)
[ ETQP3M3R3KVP ]
80
3
[ ETQP3M4R7KVP ]
80
80
Temperature rise ΔT(K)
Temperature rise ΔT(K)
80
16
60
40
20
0
0
DC Bias (A)
4
8
12
16
DC Bias (A)
[ ETQP3MR33KVP ]
80
60
40
20
0
0
4
8
12
DC Bias (A)
16
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
33
30-Jun-22
Power Choke Coil (Automotive Grade)
2. PCC-M0630M-LP series (ETQP3M□□□KVN)
Standard parts
DCR (at 20 ℃)
(mΩ)
Inductance*1
Part No.
L0
(μH)
Tolerance
33.0
22.0
15.0
10.0
6.8
4.7
3.3
2.2
1.5
1.0
0.68
ETQP3M330KVN
ETQP3M220KVN
ETQP3M150KVN
ETQP3M100KVN
ETQP3M6R8KVN
ETQP3M4R7KVN
ETQP3M3R3KVN
ETQP3M2R2KVN
ETQP3M1R5KVN
ETQP3M1R0KVN
ETQP3MR68KVN
(%)
206.0 (226.60)
128.0 (140.80)
99.2 (109.12)
71.0 (78.10)
45.6 (50.16)
29.0 (31.90)
24.1 (26.51)
14.5 (15.95)
11.0 (12.10)
6.2 (6.82)
5.2 (5.72)
±20
△T= 40 K*2
Tolerance
Typ. (max.)
(%)
MSL
level
Rated current (A) Typ.
( )*3
2.1 (1.7)
2.7 (2.2)
3.0 (2.5)
3.6 (2.9)
4.5 (3.6)
5.6 (4.6)
6.1 (5.0)
7.9 (6.5)
9.1 (7.4)
12.1 (9.9)
13.2 (10.8)
±10
△L= –30 %*4
*5
3.0
4.3
5.1
5.8
8.1
9.8
11.5
12.8
14.2
16.0
20.2
1
1
1
1
1
1
1
1
1
1
1
Series
[Size (mm)]
PCC-M0630M-LP
[6.4×6.0×3.0]
*1: Measured at 100 kHz
*2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with
high-heat dissipation (heat dissipation constant 6.5 x 6.0 x 3.0 mm : approx. 44 K/W).
*3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of
FR4 t=1.6 mm and DC current is applied.
*4: Saturation rated current : DC current which causes L(0) drop –30 %.
*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.
◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This
should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +155°C
should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance characteristics (Reference①)
● Inductance vs DC Current
Inductors (μH)
20
10
0
0
1
2
3
4
20
15
10
5
0
5
0
2
DC Bias (A)
[ ETQP3M6R8KVN ]
5
0
2
4
2
0
4
8
12
[ ETQP3M1R5KVN ]
3
2
1
0
0.5
4
8
12
16
DC Bias (A)
8
12
16
20 24
1.0
0
8
10
12
20
12
16
1.0
0.5
0
20
0
4
8
12
16
20
DC Bias (A)
[ ETQP3MR68KVN ]
0.4
10
8
1.5
0.8
0.8
0
4
DC Bias (A)
[ ETQP3M1R0KVN ]
0
6
2.0
2.0
0
20
Inductors (μH)
1.0
0
4
1.2
Inductors (μH)
1.5
4
[ ETQP3M2R2KVN ]
3.0
DC Bias (A)
2.0
2
2.5
0
16
0
DC Bias (A)
[ ETQP3M3R3KVN ]
Inductors (μH)
4
4
0
8
6
8
DC Bias (A)
4
Inductors (μH)
Inductors (μH)
10
0
8
[ ETQP3M4R7KVN ]
DC Bias (A)
Inductors (μH)
6
[ ETQP3M100KVN ]
12
5
6
0
4
15
DC Bias (A)
8
0
[ ETQP3M150KVN ]
20
Inductors (μH)
Inductors (μH)
30
[ ETQP3M220KVN ]
Inductors (μH)
25
Inductors (μH)
[ ETQP3M330KVN ]
0.6
0.4
0.2
0
30
0
10
20
30
40
DC Bias (A)
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
34
30-Jun-22
24
Power Choke Coil (Automotive Grade)
Performance characteristics (Reference②)
● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4).*3
PWB condition B : Multilayer PWB with high heat dissipation performance.*2
40
20
0
1
2
3
60
40
20
0
0
1
DC Bias (A)
[ ETQP3M6R8KVN ]
40
20
2
4
6
40
20
0
0
2
4
6
8
2
20
12
40
20
0
5
10
0
0
15
4
6
DC Bias (A)
[ ETQP3M2R2KVN ]
80
60
40
20
0
2
0
2
4
6
8
60
40
20
0
0
4
8
12
DC Bias (A)
[ ETQP3MR68KVN ]
60
0
5
4
20
80
Temperature rise ΔT(K)
40
3
DC Bias (A)
[ ETQP3M1R0KVN ]
Temperature rise ΔT(K)
60
DC Bias (A)
1
40
[ ETQP3M3R3KVN ]
80
8
0
80
60
[ ETQP3M1R5KVN ]
4
0
DC Bias (A)
80
0
20
60
DC Bias (A)
Temperature rise ΔT(K)
60
0
40
[ ETQP3M4R7KVN ]
Temperature rise ΔT(K)
Temperature rise ΔT(K)
4
80
DC Bias (A)
Temperature rise ΔT(K)
3
60
DC Bias (A)
80
0
2
80
Temperature rise ΔT(K)
0
[ ETQP3M100KVN ]
80
Temperature rise ΔT(K)
Temperature rise ΔT(K)
Temperature rise ΔT(K)
60
0
[ ETQP3M150KVN ]
[ ETQP3M220KVN ]
80
Temperature rise ΔT(K)
[ ETQP3M330KVN ]
80
20
DC Bias (A)
60
40
20
0
0
5
10
15
20
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
35
30-Jun-22
Power Choke Coil (Automotive Grade)
3. PCC-M0840M-LP series (ETQP4M□□□KVK)
Standard parts
DCR (at 20 ℃)
(mΩ)
Inductance*1
Part No.
L0
(μH)
Tolerance
33.0
22.0
15.0
10.0
6.8
4.7
3.3
2.2
1.5
1.0
0.68
ETQP4M330KVK
ETQP4M220KVK
ETQP4M150KVK
ETQP4M100KVK
ETQP4M6R8KVK
ETQP4M4R7KVK
ETQP4M3R3KVK
ETQP4M2R2KVK
ETQP4M1R5KVK
ETQP4M1R0KVK
ETQP4MR68KVK
Tolerance
Typ. (max.)
(%)
(%)
118.0 (129.80)
78.4 (86.24)
55.0 (60.50)
41.6 (45.76)
23.5 (25.85)
16.1 (17.71)
14.1 (15.51)
8.5 (9.35)
4.9 (5.39)
3.7 (4.07)
2.92 (3.21)
±20
Rated current (A) Typ.
△T= 40 K*2
( )*3
3.1 (2.6)
3.8 (3.2)
4.5 (3.8)
5.2 (4.4)
6.9 (5.9)
8.3 (7.1)
8.9 (7.6)
11.4 (9.8)
15.1 (12.8)
17.3 (14.8)
19.5 (16.6)
±10
MSL
level
△L= –30 %*4
*5
4.7
6.0
7.6
9.1
11.0
15.1
17.4
20.4
22.5
24.4
29.0
1
1
1
1
1
1
1
1
1
1
1
Series
[Size (mm)]
PCC-M0840M-LP
[8.5×8.0×4.0]
*1: Measured at 100 kHz
*2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with
high-heat dissipation (heat dissipation constant 8.5×8.0×4.0 mm : approx. 36 K/W).
*3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of
FR4 t=1.6 mm and DC current is applied.
*4: Saturation rated current : DC current which causes L(0) drop –30 %.
*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.
◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This
should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +155°C
should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance characteristics (Reference①)
● Inductance vs DC Current
2
4
6
15
10
5
0
8
0
DC Bias (A)
6
4
2
0
0
5
10
15
DC Bias (A)
1.0
0.5
DC Bias (A)
30
4
40
0
12
[ ETQP4M3R3KVK ]
0
4
8
12
16
DC Bias (A)
[ ETQP4M2R2KVK ]
3.0
3
2
1
0
10
20
2.0
1.0
0
30
0
10
20
30
1.5
1.0
0.5
0
0
10
20
30
DC Bias (A)
[ ETQP4MR68KVK ]
0.4
10
30
2.0
0.8
0.8
0
20
DC Bias (A)
[ ETQP4M1R0KVK ]
0
8
4
DC Bias (A)
1.2
Inductors (μH)
Inductors (μH)
1.5
20
0
DC Bias (A)
[ ETQP4M1R5KVK ]
10
5
8
2.5
0
20
2.0
0
DC Bias (A)
10
0
12
Inductors (μH)
5
4
8
15
[ ETQP4M4R7KVK ]
8
Inductors (μH)
Inductors (μH)
[ ETQP4M6R8KV ]
4
Inductors (μH)
0
[ ETQP4M100KVK ]
12
Inductors (μH)
10
Inductors (μH)
20
0
[ ETQP4M150KVK ]
20
20
Inductors (μH)
Inductors (μH)
30
0
[ ETQP4M220KVK ]
25
Inductors (μH)
[ ETQP4M330KVK ]
0.6
0.4
0.2
0
40
DC Bias (A)
0
10
20
30
40
50
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
36
30-Jun-22
40
Power Choke Coil (Automotive Grade)
Performance characteristics (Reference②)
● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4).*3
PWB condition B : Multilayer PWB with high heat dissipation performance.*2
40
20
0
1
2
3
4
5
60
40
20
0
0
1
DC Bias (A)
60
40
20
0
2
4
6
8
20
0
4
15
DC Bias (A)
20
25
20
0
40
20
5
10
15
0
2
20
6
4
8
[ ETQP4M2R2KVK ]
60
40
20
0
12
0
4
8
12
16
DC Bias (A)
[ ETQP4MR68KVK ]
60
0
8
4
DC Bias (A)
80
0
0
DC Bias (A)
40
0
12
8
Temperature rise ΔT(K)
20
6
60
[ ETQP4M1R0KVK ]
Temperature rise ΔT(K)
40
4
2
20
80
DC Bias (A)
60
10
0
40
[ ETQP4M3R3KVK ]
40
0
10
80
5
0
80
60
[ ETQP4M1R5KVK ]
0
20
60
DC Bias (A)
Temperature rise ΔT(K)
Temperature rise ΔT(K)
Temperature rise ΔT(K)
6
80
DC Bias (A)
Temperature rise ΔT(K)
5
40
[ ETQP4M4R7KVK ]
[ ETQP4M6R8KVK ]
0
4
3
60
DC Bias (A)
80
0
2
80
Temperature rise ΔT(K)
0
80
Temperature rise ΔT(K)
Temperature rise ΔT(K)
Temperature rise ΔT(K)
80
60
[ ETQP4M100KVK ]
[ ETQP4M150KVK ]
[ ETQP4M220KVK ]
Temperature rise (ΔTK)
[ ETQP4M330KVK ]
80
80
60
40
20
0
25
DC Bias (A)
0
10
20
30
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
37
30-Jun-22
Power Choke Coil (Automotive Grade)
4. PCC-M1040M-LP series (ETQP4M□□□KVC)
Standard parts
Part No.
NEW
NEW
DCR (at 20 ℃)
(mΩ)
Inductance*1
L0
(μH)
Tolerance
100.0
68.0
47.0
33.0
22.0
15.0
10.0
6.8
4.7
3.3
2.2
1.5
1.0
ETQP4M101KVC
ETQP4M680KVC
ETQP4M470KVC
ETQP4M330KVC
ETQP4M220KVC
ETQP4M150KVC
ETQP4M100KVC
ETQP4M6R8KVC
ETQP4M4R7KVC
ETQP4M3R3KVC
ETQP4M2R2KVC
ETQP4M1R5KVC
ETQP4M1R0KVC
(%)
242.0 (266.20)
178.4 (196.24)
132.0 (145.20)
84.6 (93.06)
60.0 (66.00)
37.0 (40.70)
25.4 (27.94)
18.5 (20.35)
12.3 (13.53)
9.4 (10.34)
6.8 (7.48)
4.9 (5.39)
2.6 (2.86)
±20
△T= 40 K*2
Tolerance
Typ. (max.)
(%)
Rated current (A) Typ.
( )*3
2.5 (2.0)
2.9 (2.4)
3.4 (2.8)
4.2 (3.4)
5.0 (4.1)
6.3 (5.2)
7.6 (6.3)
8.9 (7.4)
11.2 (9.2)
12.6 (10.3)
14.8 (12.1)
17.4 (14.3)
23.9 (19.6)
±10
MSL
level
△L= –30 %*4
*5
3.5
4.7
4.7
5.6
7.4
9.2
10.8
12.1
13.9
17.1
21.0
25.0
34.6
1
1
1
1
1
1
1
1
1
1
1
1
1
Series
[Size (mm)]
PCC-M1040M-LP
[10.7×10.0×4.0]
*1: Measured at 100 kHz
*2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with
high-heat dissipation (heat dissipation constant 10.7×10.0×4.0 mm : approx. 27 K/W).
*3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of
FR4 t=1.6 mm and DC current is applied.
*4: Saturation rated current : DC current which causes L(0) drop –30 %.
*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.
◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This
should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +155°C
should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance characteristics (Reference①)
● Inductance vs DC Current
[ ETQP4M680KVC ]
70
60
Inductors (μH)
80
60
40
20
50
40
30
20
10
0
1
2
3
4
5
6
0
7
0
DC Bias (A)
[ ETQP4M220KVC ]
15
10
5
8
5
6
7
10
0
8
5
0
12
12
10
4
8
12
2
1
DC Bias (A)
30
8
8
4
4
8
10
20
12
16
1.5
1.0
0.5
0
10
20
30
40
DC Bias (A)
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
38
8
6
10
6
4
2
0
5
10
20
15
25
DC Bias (A)
2.0
0
30
4
[ ETQP4M6R8KVC ]
0
20
[ ETQP4M2R2KVC ]
1.0
0
2
DC Bias (A)
2.5
2.0
0
0
DC Bias (A)
Inductors (μH)
Inductors (μH)
3
10
0
8
6
[ ETQP4M100KVC ]
0
16
3.0
20
4
0
0
[ ETQP4M3R3KVC ]
4
10
2
DC Bias (A)
[ ETQP4M4R7KVC ]
0
0
20
DC Bias (A)
15
5
Inductors (μH)
4
20
[ ETQP4M150KVC ]
DC Bias (A)
0
3
30
Inductors (μH)
20
Inductors (μH)
Inductors (μH)
20
4
2
30
40
DC Bias (A)
25
0
1
[ ETQP4M330KVC ]
Inductors (μH)
0
[ ETQP4M470KVC ]
2.0
Inductors (μH)
Inductors (μH)
100
0
50
80
Inductors (μH)
[ ETQP4M101KVC ]
Inductors (μH)
120
[ ETQP4M1R5KVC ]
1.5
1.0
0.5
0
0
10
20
30
40
50
DC Bias (A)
30-Jun-22
Power Choke Coil (Automotive Grade)
Performance characteristics (Reference①)
● Inductance vs DC Current
[ ETQP4M1R0KVC ]
Inductors (μH)
1.2
0.8
0.4
0
0
10
20
30
40
50
60
DC Bias (A)
Performance characteristics (Reference②)
● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4).*3
PWB condition B : Multilayer PWB with high heat dissipation performance.*2
20
0
1
2
3
4
40
20
0
0
1
[ ETQP4M220KVC ]
20
6
8
60
40
20
0
0
2
40
20
0
4
8
12
16
DC Bias (A)
Temperature rise ΔT(K)
80
4
6
8
0
[ ETQP4M3R3KVC ]
60
40
20
0
0
4
8
12
1
2
3
4
5
40
20
0
0
40
20
0
2
4
6
8
80
16
10
40
20
10
20
DC Bias (A)
DC Bias (A)
4
5
60
40
20
0
0
4
8
12
[ ETQP4M1R5KVC ]
80
60
40
20
0
0
10
20
DC Bias (A)
[ ETQP4M1R0KVC ]
60
40
20
0
0
10
20
30
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
39
6
DC Bias (A)
[ ETQP4M2R2KVC ]
0
3
80
12
60
0
2
[ ETQP4M6R8KVC ]
[ ETQP4M100KVC ]
60
0
1
DC Bias (A)
DC Bias (A)
Temperature rise ΔT(K)
80
Temperature rise ΔT(K)
Temperature rise ΔT(K)
[ ETQP4M4R7KVC ]
60
0
0
DC Bias (A)
DC Bias (A)
80
20
80
Temperature rise ΔT(K)
40
4
40
60
DC Bias (A)
80
Temperature rise ΔT(K)
Temperature rise ΔT(K)
60
2
4
[ ETQP4M150KVC ]
80
0
0
3
2
60
DC Bias (A)
DC Bias (A)
80
Temperature rise ΔT(K)
0
60
[ ETQP4M330KVC ]
[ ETQP4M470KVC ]
Temperature rise ΔT(K)
40
80
Temperature rise ΔT(K)
60
[ ETQP4M680KVC ]
80
Temperature rise ΔT(K)
[ ETQP4M101KVC ]
Temperature rise ΔT(K)
Temperature rise ΔT(K)
80
30-Jun-22
Power Choke Coil (Automotive Grade)
Dimensions in mm (not to scale)
Dimensional tolerance unless noted : ±0.5
Series PCC-M0530M-LP
Series PCC-M0630M-LP
(ETQP3M□□□KVP)
(ETQP3M□□□KVN)
Inductance
Suffix
6.0±0.4
2.54±0.3
Date Code
Polarity
Polarity
1.04±0.4
0.05 min.
0.05 min.
Series PCC-M0840M-LP
Series PCC-M1040M-LP
(ETQP4M□□□KVK)
(ETQP4M□□□✽KVC) ✽Exemption 1R0
Inductance
Suffix
10.0±0.4
5.08±0.3
Polarity
1.3±0.4
Date Code
1.3±0.4
Polarity
2.08±0.4
2.08±0.4
4.0 max.
4.0 max.
0.05 min.
Suffix
10.7±0.4
8.0±0.4
8.5±0.4
3.0±0.3
Inductance
Date Code
1.04±0.4
1.0±0.4
3.0 max.
1.0±0.4
3.0 max.
Date Code
Suffix
6.4±0.4
5.0±0.4
5.5±0.4
3.18±0.3
Inductance
0.05 min.
Series PCC-M1040M-LP
(ETQP4M1R0KVC)
Inductance
Suffix
Date Code
4.7±0.3
10.0±0.4
10.7±0.4
Polarity
2.15±0.5
4.0 max.
2.15±0.5
Unit : mm
0.05 min.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
40
30-Jun-22
Power Choke Coil (Automotive Grade)
Recommended land pattern in mm (not to scale)
Dimensional tolerance unless noted : ±0.5
(ETQP3M□□□KVP)
Series PCC-M0630M-LP
(ETQP3M□□□KVN)
Series PCC-M0840M-LP
(ETQP4M□□□KVK)
9.5
2.946
7.0
3.429
6.0
2.79
6.5
5.334
7.4
9.0
Series PCC-M0530M-LP
3.429
6.756
4.826
8.255
9.652
Series PCC-M1040M-LP
Series PCC-M1040M-LP
(ETQP4M1R0KVC)
(ETQP4M□□□✽KVC)✽Exemption 1R0
4.953
11.0
3.251
5.187
5.842
12.065
12.192
11.0
11.7
11.7
※Don't wire on the pattern on shaded portion the PWB.
Unit : mm
■ As for soldering conditions and safety precautions (Power choke coils (Automotive grade)),
please see data files
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
41
30-Jun-22
Power Choke Coil (Automotive Grade)
Packaging methods (Taping)
● Embossed carrier tape dimensions in mm (not to scale)
P0
B
W
F
A
t2
t1
E
P2
øD0
P1
Tape running direction
Unit : mm
Series
A
B
W
E
F
P1
PCC-M0530M-LP
5.6
6.1
12
1.75
5.5
8
2
4
1.5
0.3
3.3
PCC-M0630M-LP
6.5
7.1
16
1.75
7.5
8
2
4
1.5
0.3
3.3
PCC-M0840M-LP
8.63
9.1
16
1.75
7.5
12
2
4
1.5
0.4
6.0
PCC-M1040M-LP
10.65 11.75
24
1.75
11.5
16
2
4
1.5
0.5
6.35
A
B
C
øD
E
W
13.5
330
(100)
13
21
2
17.5
P2
P0
øD0
t1
t2
● Taping reel dimensions in mm (not to scale)
Unit : mm
Series
PCC-M0530M-LP
PCC-M0630M-LP
PCC-M0840M-LP
PCC-M1040M-LP
B
E
C
øD
25.5
W
A
Terminal
Parts mounting (Taping)
Standard packing quantity / Reel
Serise
Part No.
PCC-M0530M-LP
ETQP3M□□□KVP
PCC-M0630M-LP
ETQP3M□□□KVN
PCC-M0840M-LP
ETQP4M□□□KVK
PCC-M1040M-LP
ETQP4M□□□KVC
Minimum quantity / Packing unit
Quantity per reel
4,000 pcs / box (2 reel)
2,000 pcs
1,000 pcs / box (2 reel)
500 pcs
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
42
30-Jun-22
UPDATE
Power Inductors
Power Choke Coil (Automotive Grade)
PCC-M0648M-LE series
PCC-M0748M-LE series
High heat resistance and high reliability using metal composite core (MC)
Industrial property : Patents 3 (Registered 2 / Pending 1)
Features
●Low loss (Low DC resistance)
●High heat resistance
: Operation up to 150 ℃ including self-heating
●SMD type
: High vibration resistance as result of newly developed integral construction ;
●High-reliability
under severe reliability conditions of automotive and other strenuous
applications
●High bias current
: Excellent inductance stability using ferrous alloy magnetic material
●Temp. stability
: Excellent inductance stability over broad temp. range
●Low audible (buzz) noise
: A gapless structure achieved with metal composite core
●High efficiency
: Low DC resistance of winding and low eddy-current loss of the core
●Shielded construction
●AEC-Q200 compliant
●RoHS compliant
Recommended applications
●Noise filter for various drive circuitry requiring high temp. operation and peak current handling capability
●Boost-Converter, Buck-Converter DC/DC
Standard packing quantity (Minimum quantity/Packing unit)
● 1,000 pcs/box (2 reel)
Explanation of part numbers
1
2
3
4
E
T
Q
P
Product code
Classification
5
6
7
8
9
M
Height
Inductance
Winding
10
11
K
F
Core
Suffix
12
Size
(Example)
Code
4R7
220
Inductance
4.7 μH
22 μH
Code
N
M
Size
□ 6 mm
□ 7 mm
Temperature rating
Operating temperature range
After PWB mounting
Storage condition
Before PWB mounting
Tc : -40 ℃ to +150 ℃ (Including self-temperature rise)
Ta : -5 ℃ to +35 ℃ 85%RH max.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
43
30-Jun-22
Power Choke Coil (Automotive Grade)
1. PCC-M0648M-LE series (ETQP4M□□□KFN)
Standard parts
DCR (at 20 ℃)
(mΩ)
Inductance*1
Part No.
L0
(μH)
Tolerance
Typ. (max.)
(%)
MSL
level
Rated current (A) Typ.
Tolerance
(%)
*2
△T= 40 K
( )*3
△L= –30 %*4
*5
ETQP4M3R3KFN
3.3
13.1 (14.41)
9.2 (7.2)
12.0
1
ETQP4M4R7KFN
4.7
20.7 (22.77)
7.3 (5.7)
9.3
1
ETQP4M6R8KFN
6.8
5.9 (4.6)
9.9
1
ETQP4M100KFN
10.0
40.4 (44.44)
5.2 (4.1)
8.1
1
ETQP4M150KFN
15.0
63.8 (70.18)
4.2 (3.3)
6.7
1
32.1 (35.31)
±20
±10
Series
[Size (mm)]
PCC-M0648M-LE
[6.4×6.0×4.8]
*1: Measured at 100 kHz
*2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with
high-heat dissipation (heat dissipation constant 6.4 x 6.0 x 4.8 mm : approx. 30 K/W).
*3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of
FR4 t=1.6 mm and DC current is applied.
*4: Saturation rated current : DC current which causes L(0) drop –30 %.
*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.
◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This
should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150°C
should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance characteristics (Reference①)
● Inductance vs DC Current
6
Inductance (μH)
Inductance (μH)
[ ETQP4M4R7KFN ]
[ ETQP4M3R3KFN ]
4
3
2
1
0
0
2
4
6
8
10
12
14
5
4
3
2
1
0
16
0
2
4
6
DC Bias (A)
Inductance (μH)
Inductance (μH)
4
2
0
2
4
6
8
12
14
16
[ ETQP4M100KFN ]
12
6
0
10
DC Bias (A)
[ ETQP4M6R8KFN ]
8
8
10
12
14
10
8
6
4
2
0
16
DC Bias (A)
0
2
4
6
8
10
12
14
16
DC Bias (A)
[ ETQP4M150KFN ]
Inductance (μH)
20
16
12
8
4
0
0
1
2
3
4
5
6
7
8
9
10
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
44
30-Jun-22
Power Choke Coil (Automotive Grade)
Performance characteristics (Reference②)
● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4).*3
PWB condition B : Multilayer PWB with high heat dissipation performance.*2
[ ETQP4M4R7KFN ]
Temperature rise ΔT(K)
Temperature rise ΔT(K)
[ ETQP4M3R3KFN ]
80
60
40
20
0
0
2
4
6
8
10
12
14
80
60
40
20
0
0
2
4
DC Bias (A)
Temperature rise ΔT(K)
Temperature rise ΔT(K)
[ ETQP4M6R8KFN ]
80
60
40
20
0
0
1
3
2
4
5
6
7
8
DC Bias (A)
Temperature rise ΔT(K)
6
8
10
12
DC Bias (A)
[ ETQP4M100KFN ]
80
60
40
20
0
0
1
2
3
4
5
6
7
8
DC Bias (A)
[ ETQP4M150KFN ]
80
60
40
20
0
0
1
2
3
4
5
6
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
45
30-Jun-22
Power Choke Coil (Automotive Grade)
2. PCC-M0748M-LE series (ETQP4M□□□KFM)
Standard parts
DCR (at 20 ℃)
(mΩ)
Inductance*1
Part No.
NEW
L0
(μH)
Tolerance
Typ. (max.)
(%)
MSL
level
Rated current (A) Typ.
Tolerance
(%)
*2
△T= 40 K
( )*3
△L= –30 %*4
*5
ETQP4M4R7KFM
4.7
16.8 (18.48)
8.8 (6.5)
10.7
1
ETQP4M100KFM
10.0
36.0 (39.60)
6.0 (4.5)
9.6
1
ETQP4M220KFM
22.0
3.9 (2.9)
4.6
1
ETQP4M330KFM
ETQP4M470KFM
±20
84.1 (92.51)
±10
33.0
115.0 (126.5)
3.4 (2.5)
4.2
1
47.0
148.6 (163.46)
2.9 (2.2)
3.7
1
Series
[Size (mm)]
PCC-M0748M-LE
[7.4×7.0×4.8]
*1: Measured at 100 kHz
*2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with
high-heat dissipation (heat dissipation constant 7.4 x 7.0 x 4.8 mm : approx. 30 K/W).
*3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of
FR4 t=1.6 mm and DC current is applied.
*4: Saturation rated current : DC current which causes L(0) drop –30 %.
*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.
◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This
should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150°C
should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance characteristics (Reference①)
● Inductance vs DC Current
12
5
Inductance (μH)
Inductance (μH)
[ ETQP4M100KFM ]
[ ETQP4M4R7KFM ]
6
4
3
2
1
0
0
2
4
6
8
10
12
14
10
8
6
4
2
0
16
0
2
4
6
DC Bias (A)
Inductance (μH)
Inductance (μH)
20
15
10
5
0
1
2
3
4
5
6
7
14
16
20
10
0
1
2
3
4
5
DC Bias (A)
[ ETQP4M470KFM ]
50
30
0
8
DC Bias (A)
Inductance (μH)
12
40
25
0
10
[ ETQP4M330KFM ]
[ ETQP4M220KFM ]
30
8
DC Bias (A)
40
30
20
10
0
0
1
2
3
4
5
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
46
30-Jun-22
Power Choke Coil (Automotive Grade)
Performance characteristics (Reference②)
● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4).*3
PWB condition B : Multilayer PWB with high heat dissipation performance.*2
[ ETQP4M4R7KFM ]
Temperature rise ΔT(K)
Temperature rise ΔT(K)
80
60
40
20
0
0
1
2
3
4
5
6
7
8
9
[ ETQP4M100KFM ]
80
60
40
20
0
10 11 12 13
0
1
2
DC Bias (A)
6
7
8
9
[ ETQP4M330KFM ]
Temperature rise ΔT(K)
Temperature rise ΔT(K)
5
80
60
40
20
0
4
DC Bias (A)
[ ETQP4M220KFM ]
80
3
0
1
3
2
4
5
6
DC Bias (A)
60
40
20
0
0
1
2
3
4
5
DC Bias (A)
Temperature rise ΔT(K)
[ ETQP4M470KFM ]
80
60
40
20
0
0
1
2
3
4
5
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
47
30-Jun-22
Power Choke Coil (Automotive Grade)
Dimensions in mm (not to scale)
Dimensional tolerance unless noted : ±0.5
Series PCC-M0648M-LE
Series PCC-M0748M-LE
(ETQP4M□□□KFM)
Suffix
7.0±0.4
1.6±0.4
1.6±0.4
Polarity
0.05 min.
4.8 max.
Date Code
4.8 max.
6.0±0.4
1.6±0.4
1.6±0.4
Polarity
0.05 min.
Date Code
Suffix
2.0±0.2
Inductance
7.4±0.4
2.0±0.2
(ETQP4M□□□KFN)
Inductance
6.4±0.4
Unit : mm
Recommended land pattern in mm (not to scale)
Dimensional tolerance unless noted : ±0.5
Series PCC-M0648M-LE
Series PCC-M0748M-LE
(ETQP4M□□□KFN)
(ETQP4M□□□KFM)
2.2
7.0
2.2
8.0
8.4
7.4
3.0
2.0
7.4
8.4
※Don't wire on the pattern on shaded portion the PWB.
Unit : mm
■ As for soldering conditions and safety precautions (Power choke coils (Automotive grade)),
please see data files
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
48
30-Jun-22
Power Choke Coil (Automotive Grade)
Packaging methods (Taping)
● Embossed Carrier Tape Dimensions in mm (not to scale)
B
W
F
A
t2
t1
E
P0
P2
øD0
P1
Tape running direction
Unit : mm
P2
P0
øD0
t1
t2
Series
A
B
W
E
F
P1
PCC-M0648M-LE
6.6
7.1
16
1.75
7.5
12
2
4
1.5
0.4
5.0
PCC-M0748M-LE
7.6
8.1
16
1.75
7.5
12
2
4
1.5
0.4
6.0
A
B
C
øD
E
W
330
(100)
13
21
2
17.5
● Taping Reel Dimensions in mm (not to scale)
E
C
B
Unit : mm
øD
W
Series
PCC-M0648M-LE
PCC-M0748M-LE
A
Terminal
Parts mounting (Taping)
Standard packing quantity / Reel
Serise
Part No.
PCC-M0648M-LE
ETQP4M□□□KFN
PCC-M0748M-LE
ETQP4M□□□KFM
Minimum quantity / Packing unit
Quantity per reel
1,000 pcs / box (2 reel)
500 pcs
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
49
30-Jun-22
Power Inductors
Power Choke Coil (Automotive Grade)
PCC-M0530M-H series
PCC-M0630M-H series
High heat resistance and high reliability using metal composite core (MC)
Features
● Reduce core loss in high frequency band (More than 2 MHz)
● High heat resistance
: Operation up to 150 ℃ including self-heating
● Low profile
: 3mm max. height
● SMD type
: High vibration resistance as result of newly developed integral construction ;
● High-reliability
under severe reliability conditions of automotive and other strenuous
applications
● High bias current
: Excellent inductance stability using ferrous alloy magnetic material
● Temp. stability
: Excellent inductance stability over broad temp. range
● Low audible (buzz) noise
: A gapless structure achieved with metal composite core
● High efficiency
: Low DC resistance of winding and low eddy-current loss of the core
● Shielded construction
● AEC-Q200 compliant
● RoHS compliant
Recommended applications
● Noise filter for various drive circuitry requiring high temp. operation and peak current handling capability
● Boost-Converter, Buck-Converter DC/DC
Standard packing quantity (Minimum quantity/Packing unit)
● 2,000 pcs/box (2 reel)
Explanation of part numbers
1
2
3
4
E
T
Q
P
Product code
5
Classification
6
7
8
9
M
Height
Inductance
Winding
10
11
H
F
Core
Suffix
12
Size
(Example)
Code
Inductance
Code
Size
2R2
2.2 μH
P
□ 5 mm
100
10 μH
N
□ 6 mm
Temperature rating
Operating temperature range
Storage condition
After PWB mounting
Before PWB mounting
Tc : -40 ℃ to +150 ℃ (Including self-temperature rise)
Ta : -5 ℃ to +35 ℃ 85%RH max.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
50
6-Aug-21
Power Choke Coil (Automotive Grade)
PCC-M0530M-H / PCC-M0630M-H series (ETQP3M□□□HFP/ETQP3M□□□HFN)
Standard parts
DCR (at 20 ℃)
(mΩ)
Inductance*1
Part No.
L0
(μH)
ETQP3M2R2HFP
2.2
ETQP3M100HFN
10.0
Tolerance
Tolerance
(%)
19.5 (21.45)
±20
±20
68.0 (74.8)
144.0 (158.4)
22.0
ETQP3M220HFN
Typ. (max.)
(%)
MSL
level
Rated current (A) Typ.
*2
△T= 40 K
Series
[Size (mm)]
△L= –30 %*4
*5
6.3 (5.2)
9.0
1
PCC-M0530M-H
[5.5×5.0×3.0]
3.7 (3.0)
5.5
1
PCC-M0630M-H
2.5 (2.1)
4.0
1
[6.5×6.0×3.0]
( )*3
*1: Measured at 100 kHz
*2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with
high-heat dissipation (heat dissipation constant : approx. 20 K/W).
*3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of
FR4 t=1.6 mm and DC current is applied.
*4: Saturation rated current : DC current which causes L(0) drop –30 %.
*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.
◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This
should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150°C
should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance characteristics (Reference①)
● Inductance vs DC Current
[ ETQP3M100HFN ]
12
2.0
10
Inductors (μH)
Inductors (μH)
[ ETQP3M2R2HFP ]
2.5
1.5
1.0
0.5
0
0
2
4
6
10
8
12
8
6
4
2
0
14
DC Bias (A)
0
1
2
3
4
5
6
7
8
9
DC Bias (A)
[ ETQP3M220HFN ]
25
Inductors (μH)
20
15
10
5
0
0
1
2
3
4
5
6
7
8
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
51
6-Aug-21
Power Choke Coil (Automotive Grade)
Performance characteristics (Reference②)
● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4).*3
PWB condition B : Multilayer PWB with high heat dissipation performance.*2
[ ETQP3M100HFN ]
Temperature rise ΔT(K)
Temperature rise ΔT(K)
[ ETQP3M2R2HFP ]
80
60
40
20
0
0
1
2
3
4
5
6
7
8
80
60
40
20
0
0
1
2
DC Bias (A)
3
4
5
6
DC Bias (A)
Temperature rise ΔT(K)
ETQP3M2208/208/208/20HFN
80
60
40
20
0
0
1
2
3
4
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
52
6-Aug-21
Power Choke Coil (Automotive Grade)
Dimensions in mm (not to scale)
Dimensional tolerance unless noted : ±0.5
Series PCC-M0530M-H
Series PCC-M0630M-H
(ETQP3M□□□HFP)
(ETQP3M□□□HFN)
Suffix
Inductance
1.5
Polarity
0.05 min.
3.0 max.
Date Code
3.0±0.3
6.0±0.4
3.0±0.3
5.0±0.4
1.2±0.4
1.2±0.4
Polarity
0.05 min.
Date Code
Suffix
6.5±0.4
5.5±0.4
1.5
3.0 max.
Inductance
Unit : mm
Recommended land pattern in mm (not to scale)
Dimensional tolerance unless noted : ±0.5
Series PCC-M0530M-H
Series PCC-M0630M-H
(ETQP3M□□□HFP)
(ETQP3M□□□HFN)
3.6
6.0
3.6
7.0
7.1
6.1
2.2
2.8
7.2
8.8
※Don't wire on the pattern on shaded portion the PWB.
Unit : mm
■ As for soldering conditions and safety precautions (Power choke coils (Automotive grade)),
please see data files
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
53
6-Aug-21
Power Choke Coil (Automotive Grade)
Packaging methods (Taping)
● Embossed carrier tape dimensions in mm (not to scale)
P0
t1
E
P2
øD0
B
W
F
A
t2
P1
Tape running direction
Unit : mm
Series
A
B
W
E
F
P1
P2
P0
øD0
t1
t2
PCC-M0530M-H
5.6
6.1
16
1.75
7.5
12
2
4
1.5
0.4
3.3
PCC-M0630M-H
7.1
6.6
16
1.75
7.5
12
2
4
1.5
0.4
3.3
● Taping reel dimensions in mm (not to scale)
Unit : mm
Series
E
PCC-M0530M-H
C
B
PCC-M0630M-H
A
B
C
øD
E
W
330
(100)
13
21
2
17.5
øD
W
A
Parts mounting (Taping)
Series PCC-M0530M-H
Terminal
SeriesPCC-M0630M-H
Standard packing quantity / Reel
Serise
Part No.
PCC-M0530M-H
ETQP3M□□□HFP
PCC-M0630M-H
ETQP3M□□□HFN
Minimum quantity / Packing unit
Quantity per reel
2,000 pcs / box(2 reel)
1,000 pcs
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
54
6-Aug-21
Power Inductors
Power Choke Coil (Automotive Grade)
PCC-D1413H (DUST) series
Realize high heat resistance, low loss and high reliability with dust core (DUST)
Industrial property:patents 5 (Pending)
Features
●High heat resistance
●SMD and small package
●High-reliability
: Operation up to 150 ℃ including self-heating
: L 14.7×W 13.2×H 13.1 mm
: High vibration resistance as result of newly developed integral construction ;
under severe reliability conditions of automotive and other strenuous
applications
: Excellent inductance stability using ferrous alloy magnetic material
: 5 Hz to 2 kHz/30 G
: Achieve by Low loss Dust core and Edgewise coil with rectangular wire
●High bias current
●High Vibration proof
●High efficiency
●Shielded construction
●AEC-Q200 compliant
●RoHS compliant
Recommended applications
● Driver circuits of fuel injection systems in automotive, driver circuits of diesel common rail injection,
step-up power supplies for motor driver-circuits
Standard packing quantity (Minimum quantity/Packing unit)
● 600 pcs /10 tray
Explanation of part numbers
1
2
3
4
E
T
Q
P
Product Code
Classification
5
6
7
8
9
H
Height
Winding
10
11
12
Suffix
Size
D
Inductance
Core
Temperature rating
Operating temperature range
After PWB mounting
Storage condition
Before PWB mounting
Tc : -40 ℃ to +150 ℃ (Including self-temperature rise)
Ta : -5 ℃ to +35 ℃ 85%RH max.
Standard parts
Part No.
ETQPDH240DTV
Inductance*1
L0 at 0A (μH)
L1 at 10A (μH)
36.0±30 %
(24.0)*2
DCR
at 20 ℃ (mΩ)
25.8 typ.
ACR
at 20 kHz (mΩ)
50.0 typ.
Rated current*3
△T=40K (A)
6.9
*1: Measured at 100 kHz.
*2: Reference Only.
*3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4)
and measured at room temperature.
◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This
should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150℃
should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
55
1-Feb-20
Power Choke Coil (Automotive Grade)
Performance characteristics (Reference)
● Inductance vs DC Current
[ ETQPDH240DTV ]
● Case Temperature vs DC Current
[ ETQPDH240DTV ]
100
45
90
40
80
Temperature rise ΔT(K)
50
Inductors (μH)
35
30
25
20
15
10
60
50
40
30
20
10
5
0
70
0
2
4
6
10
8
12
14
16
18
20
0
0
1
2
3
4
5
6
7
8
9
DC Bias (A)
DC Bias (A)
Dimensions in mm (not to scale)
Connection
Dimensional tolerance unless noted : ±0.5
Suffix
10.53
P1
13.1
13.2±0.6
P2
P2
5.9
2.45
14.7
6.7 min.
12.6
2.45
Inductance
10.53
Date Code
P1
✽None polar character
Unit : mm
Recommended land pattern in mm (not to scale)
Dimensional tolerance unless noted : ±0.5
1.9
Recommend
Resist opening area
8.4
20.6
5
4.4
10.35
10.35
Recommend
copper pad area
✽ Due to bigger part, Thermal Capacity is large and
may occure PWB temperature differences during
reflow process.
Recommended land pattern (Heat absorb) should
be designed with reflow mountablity.
Unit : mm
■ As for soldering conditions and safety precautions (Power choke coils (Automotive grade)),
please see data files
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
56
1-Feb-20
10
Power Choke Coil (Automotive Grade)
Packaging methods (Tray)
● Blister tray (mm) 60 pcs
B
G
A
F
D
E
C
● Blister tray dimention
Unit : mm
Part No.
A
ETQPDH240DTV
152
B
262
C
D
E
F
G
23
14.8
15.1
19
18
Parts mounting (Tray)
Standard packing quantity / Tray
Part No.
Quantity
ETQPDH240DTV
600 pcs / 10 Tray (60 pcs / 1 Tray)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
57
1-Feb-20
Power Inductors
Temperature (℃)
Reflow soldering conditions
T3
T2
T1
t1
t2
0
Time
● Pb free solder recommended temperature profile
Power Choke Coils (Automotive Grade)
Series
ETQP3M◻◻◻YFP
ETQP4M◻◻◻YFP
ETQP3M◻◻◻YFN
ETQP4M◻◻◻YFN
ETQP5M◻◻◻YFM
ETQP5M◻◻◻YGM
ETQP5M◻◻◻YFK
ETQP5M◻◻◻YGK
ETQP5M◻◻◻YFC
ETQP5M◻◻◻YGC
ETQP5M◻◻◻YLC
ETQP6M◻◻◻YLC
ETQP5M◻◻◻YSK
ETQP5M◻◻◻YSC
ETQP8M◻◻◻JFA
ETQP3M◻◻◻KVP
ETQP3M◻◻◻KVN
ETQP4M◻◻◻KVK
ETQP4M◻◻◻KVC
ETQP4M◻◻◻KFN
ETQP4M◻◻◻KFM
ETQP3M◻◻◻HFP
ETQP3M◻◻◻HFN
ETQPDH◻◻◻DTV
Preheat
T1 [℃]
t1 [s]
150 to 170
60 to 120
Soldering
T2 [℃]
t2 [s]
230℃
30 to 40
Peak temperature
T3
T3 limit
250℃, 5 s
260℃, 10 s 2 times max.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
58
Time of
reflow
01-May-20
Power Choke Coil (Automotive Grade)
Application Guidelines (Automotive grade)
Safety precautions
・ When using our products, no matter what sort of equipment they might be used for, be sure to make a written
・
・
・
agreement on the specifications with us in advance. The design and specifications in this catalog are subject to
change without prior notice.
Do not use the products beyond the specifications described in this catalog.
This catalog explains the quality and performance of the products as individual components. Before use, check
and evaluate their operations when installed in your products.
Install the following systems for a failsafe design to ensure safety if these products are to be used in equipment
where a defect in these products may cause the loss of human life or other significant damage, such as damage
to vehicles (automobile, train, vessel), traffic lights, medical equipment, aerospace equipment, electric heating
appliances, combustion/gas equipment, rotating equipment, and disaster/crime prevention equipment.
✽ Systems equipped with a protection circuit and a protection device.
✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault.
Precautions for use
1. Provision to abnormal condition
This power choke coil itself does not have any protective function in abnormal condition such as overload,
short-circuit and open-circuit conditions, etc.
Therefore, it shall be confirmed as the end product that there is no risk of smoking, fire, dielectric withstand
voltage, insulation resistance, etc. in abnormal conditions to provide protective devices and/or protection circuit
in the end product.
2. Temperature rise
Temperature rise of power choke coil depends on the installation condition in end products. It shall be confirmed
in the actual end product that temperature rise of power choke coil is in the limit of specified temperature class.
3. Dielectric strength
Dielectric withstanding test with higher voltage than specific value will damage Insulating material and shorten
its life.
4. Water
This Power choke coil must not be used in wet condition by water, coffee or any liquid because insulation
strength becomes very low in such condition.
5. Potting
If this power choke coil is potted in some compound, coating material of magnet wire might be occasionally
damaged. Please ask us if you intend to pot this power choke coil.
6. Model
When this power choke coil is used in a similar or new product to the original one, it might be unable to satisfy
he specifications due to difference of condition of usage.
Please ask us if you use this power choke coil in the manner such as above.
7. Drop
If the power choke coil receives mechanical stress such as drop, characteristics may become poor (due to
damage on coil bobbin, etc.). Never use such stressed power choke coil.
8. Buzz Noise
When this coil is used in the frequency band of the audible range (≒ 20 Hz to 20 kHz), or, when using in
burst mode, depending on the operating conditions (conditions of the energized waveform) sounds (buzz noise)
may occur. Depending on the circuit / board installation environment it may be heard as abnormal sounds,
so please check in advance.
9. Solvent (Series MC)
If this power choke coil is dipped in the cleaning agent, and the coating agent of the toluene and the xylene
system, there is a possibility that the performance decreases greatly. Please ask us if you intend to pot this power
choke coil.
10. Static electricity measures (Series MC)
①Circuit design
Please set up the ESD measures parts such as capacitors in the former steps of this power choke coil for static
electricity when there is a possibility that static electricity is impressed to the choke coil on the circuit.
Moreover, please consult our company about such a case once.
1-Oct-19
59
Power Choke Coil (Automotive Grade)
②Treatment with single
Take countermeasures against static electricity when using single power choke coil. (process and equipment)
There is a possibility that the characteristic changes when the voltage of 200 V or more is impressed to this
power choke coil. Please handle 200 V or less.
11. Printed circuit board design
①Land pattern and Via which exceed Operating Voltage, should not be placed top layer PWB under the products
for keeping isolation between inside coil and surface of PWB. (Series DUST)
②To the opposing part in this power choke coil bottom please install neither pattern nor the beer, etc. (Series MC)
8
8.4
3.8
The opposing part in
the choke coil bottom
2.8
10
③Parts arranged around this power choke coil do
not touch the surface of this power choke coil
(Top side and side). (Series MC)
The opposing
part in the
choke coil
bottom
Side
Top side
(PWB)
Side
④This power choke coil is different from the ferrite core-type that installs general concentration GAP.
It has the leakage magnetic bunch distribution of the choke coil to the vertical direction. Please be cautious
when using parts and circuit compositions which are easily affected by the leakage flux.
12. Other using emviroment
This power choke coil is not designed for the use in the following, special environment.
Therefore, please do not use it in the following special environment.
・Use in place where a lot of causticity gases such as sea breeze, Cl2, H2S, NH3, SO2, and NOx exist.
・Use in place where out-of-door exposure and direct sunshine strike.
13. Core Chipping and Core Crack
This choke coil has a possibility to make partial chipping or crack in the core due to excessive mechanical stress
from outside, and might have initially a partial chipping and/or cracks that do not affect the quality.
14. Keeping environment
If this power choke coil is kept under following environment and condition, there is a possibility that the
performance and soldering decreases greatly.
・Keep in place where a lot of causticity gases such as sea breeze, Cl2, H2S, NH3, SO2, and NOx exist.
・Keep in place where out-of-door exposure and direct sunshine strike.
<Package markings>
Package markings include the product number, quantity, and country of origin.
In principle, the country of origin should be indicated in English.
AEC-Q200 Compliant
The products are tested based on all or part of the test conditions and methods defined in AEC-Q200.
Please consult with Panasonic for the details of the product specification and specific evaluation test results,
etc., and please review and approve Panasonic's product specification before ordering.
1-Oct-19
60
Power Inductors
Power Choke Coil
PCC-M0730L (MC) series
Small mounting size for multi-phase DC/DC converter circuits
Industrial property : Patents 18 (Registered 15 / Pending 3)
Features
●Small type (8.7×7.0×H3.0 mm)
●High power (22 A)
●Low loss (DCR : 1.12 mΩ)
●Tighter DCR tolerance (±7 %)
●Suitable for high frequency circuit (up to 1 MHz)
●Low buzz noise due to its gap-less structure
●Shielded construction
●RoHS compliant
Recommended applications
●Notebook and Desktop PC power supply modules
●Servers, Routers, DC/DC converters for driving CPUs
Standard packing quantity (Minimum quantity/Packing unit)
●3,000 pcs/box(2 reel)
Explanation of part numbers
1
2
3
4
5
6
E
T
Q
P
3
L
Classification
Size
Winding
Product code
7
8
9
Inductance
10
11
12
Core
Packaging
Suffix
Standard parts
Part No.
Inductance (at 20℃)*1
L0 at 0A
L1*4
Rated current
(A)*2
Rated current DC resistance
(reference)
(at 20℃)
(A)*3
(mΩ) max.
(μH)
(μH)
Measurement
current
ETQP3LR15CFM
0.15±20 %
(0.12)
29
29
43
0.66±7 %
ETQP3LR24CFM
0.24±20 %
(0.19)
22
22
35
1.12±7 %
(A)
*1: Inductance is measured at 1.0 MHz.
*2: Rated current defines actual value of DC current, when temperature rise of coil becomes 40 K. (Method A)
*3: Rated current (reference) defines actual value of DC current, when temperature rise of coil becomes 40 K. (Method B)
*4: Reference only
◆ Method A (PANASONIC's standard measurement conditions), Method B (high heat dissipation measurement) is different from
Method A by the measurement methods. In normal application condition, the part's temperature depends on circuit design
and heat dissipation condition. This condition shall be verified by the worst operational condition.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
61
18-Sep-20
Power Choke Coil
Performance characteristics (Reference)
Inductance vs DC Current
Case Temperature vs DC Current(Method A)
ETQP3LR24CFM
ETQP3LR15CFM
(uH)
ETQP3LR24CFM
ETQP3LR15CFM
0.30
100
0.25
80
Temp. rise (K)
0.20
0.15
0.10
40
20
0.05
0.00
60
0
5
10
15
20
25
30
35
0
40
0
5
10
15
(A)
20
25
30
35
Idc (A)
Dimensions in mm (not to scale)
8.7 max.
2.0±0.3
7.0±0.3
0.01 min.
P1
P2
2.0
3.0 max.
Unit : mm
Connection
Recommended land patterns in mm (not to scale)
2.6
P2
P1
2.8
3.6
2.8
Unit : mm
■ As for soldering conditions and safety precautions (Power choke coils for consumer use),
please see data files.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
62
18-Sep-20
Power Inductors
Power Choke Coil (Low DCR type)
PCC-M0740L (MC) series
Small mounting size for multi-phase DC/DC converter circuits
Industrial property : Patents 2 (Pending)
Features
●Small type (8.7×7.0×H4.0 mm)
●High power (17 A to 24 A)
●Low loss (DCR : 1.0 to 1.5 mΩ)
●Tighter DCR tolerance (±7 %)
●Suitable for high frequency circuit (up to 1 MHz)
●Low buzz noise due to its gap-less structure
●Shielded construction
●RoHS compliant
Recommended applications
●Notebook and Desktop PC power supply modules
●Servers, Routers, DC/DC converters for driving CPUs
Standard packing quantity (Minimum quantity/Packing unit)
●3,000 pcs/box (2 reel)
Explanation of part numbers
1
2
3
4
5
6
E
T
Q
P
4
L
Classification
Size
Winding
Product code
7
8
9
Inductance
10
11
12
Core
Packaging
Suffix
Standard parts
Inductance (at 20℃)*1
Part No.
L1*4
L0 at 0A
Rated current
(A)*2
Rated current DC resistance
(reference)
(at 20℃)
(A)*3
(mΩ) max.
(μH)
(μH)
Measurement
current
ETQP4LR15AFM
0.15±20 %
(0.13)
29
29
43.0
0.66±7 %
ETQP4LR24AFM
0.24±20 %
(0.20)
24
24
35.5
1.00±7 %
ETQP4LR36AFM
0.36±20 %
(0.30)
20
20
31.0
1.35±7 %
ETQP4LR42AFM
0.42±20 %
(0.35)
17
17
28.5
1.50±7 %
(A)
*1: Inductance is measured at 1.0 MHz.
*2: Rated current defines actual value of DC current, when temperature rise of coil becomes 40 K. (Method A)
*3: Rated current (reference) defines actual value of DC current, when temperature rise of coil becomes 40 K. (Method B)
*4: Reference only
◆ Method A (PANASONIC's standard measurement conditions), Method B (high heat dissipation measurement) is different from
Method A by the measurement methods. In normal application condition, the part's temperature depends on circuit design
and heat dissipation condition. This condition shall be verified by the worst operational condition.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
63
18-Sep-20
Power Choke Coil (Low DCR type)
Performance characteristics (Reference)
Inductance vs DC Current
Case Temperature vs DC Current(Method A)
ETQP4LR42AFM
ETQP4LR42AFM
(uH)
ETQP4LR36AFM
ETQP4LR36AFM
ETQP4LR24AFM
ETQP4LR24AFM
ETQP4LR15AFM
ETQP4LR15AFM
100
0.45
90
0.40
80
0.35
70
Temp. rise (K)
0.30
0.25
0.20
0.15
60
50
40
30
0.10
20
0.05
10
0.00
0
5
10
15
20
25
0
30
0
5
10
15
(A)
20
25
30
Idc (A)
Dimensions in mm (not to scale)
0.01 min.
Unit : mm
A
7.0±0.3
8.7 max.
Part No.
ETQP4LR15AFM
P1
4.0 max.
Connection
ETQP4LR24AFM
P2
ETQP4LR36AFM
2.0
ETQP4LR42AFM
A
3.0±0.3
2.0±0.3
Recommended land patterns in mm (not to scale)
P2
B
Unit : mm
Part No.
ETQP4LR15AFM
ETQP4LR24AFM
ETQP4LR36AFM
P1
2.8
3.6
2.8
ETQP4LR42AFM
B
3.6
2.6
■ As for soldering conditions and safety precautions (Power choke coils for consumer use),
please see data files.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
64
18-Sep-20
Power Inductors
Power Choke Coil
PCC-M1040L (MC) series
Small mounting size for multi-phase DC/DC converter circuits
Industrial property : Patents 4 (Pending)
Features
●Small type (11.5×10.0×H4.0 mm)
●High power (21 A to 28 A)
●Low loss (DCR : 0.7 to 1.56 mΩ)
●Tighter DCR tolerance (±5 % to ±10 %)
●Suitable for high frequency circuit (up to 1 MHz)
●Low buzz noise due to its gap-less structure
●Shielded construction
●RoHS compliant
Recommended applications
●Notebook and Desktop PC power supply modules
●Servers, Routers, DC/DC converters for driving CPUs
Standard packing quantity (Minimum quantity/Packing unit)
●2,000 pcs/box(2 reel): ETQP4LR36WFC, ETQP4LR56WFC, ETQP4LR45XFC
●1,000 pcs/box(2 reel): ETQP4LR19WFC
Explanation of part numbers
1
2
3
4
5
6
E
T
Q
P
4
L
Classification
Size
Winding
Product code
7
8
9
Inductance
10
11
12
Core
Packaging
Suffix
Standard parts
Inductance (at 20℃)*1
Part No.
L2*4
L1
L0 at 0A
Rated current
Measurement
(A)*2
Rated current
(reference)
(A)*3
DC resistance
(at 20℃)
(mΩ)
(μH)
(μH)
Measurement
current
(A)
(μH)
ETQP4LR19WFC
(0.2)
0.19±20 %
21
(0.17)
30
28
38
0.70±10 %
ETQP4LR36WFC
(0.37)
0.36±20 %
17
(0.34)
24
24
33
1.10± 5 %
ETQP4LR56WFC
(0.6)
0.56±20 %
15
(0.53)
21
21
28
1.56± 5 %
ETQP4LR45XFC
+20 %
0.45
−25 %
—
—
(0.38)
25
25
33
1.10± 5 %
current
(A)
*1: Inductance is measured at 1.0 MHz.
*2: Rated current defines actual value of DC current, when temperature rise of coil becomes 40 K. (Method A)
*3: Rated current (reference) defines actual value of DC current, when temperature rise of coil becomes 40 K. (Method B)
*4: Reference only
◆ Method A (PANASONIC's standard measurement conditions), Method B (high heat dissipation measurement) is different from
Method A by the measurement methods. In normal application condition, the part's temperature depends on circuit design
and heat dissipation condition. This condition shall be verified by the worst operational condition.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
65
15-Sep-20
Power Choke Coil
Performance characteristics (Reference)
Inductance vs DC Current
Case Temperature vs DC Current(Method A)
ETQP4LR56WFC
ETQP4LR36WFC
ETQP4LR19WFC
ETQP4LR45XFC
(uH)
0.8
ETQP4LR56WFC
ETQP4LR36WFC / ETQP4LR45XFC
ETQP4LR19WFC
100
90
0.7
80
Temp. rise (K)
0.6
0.5
0.4
0.3
0.2
60
50
40
30
20
0.1
0.0
70
10
0
2
4
6
8
10
12
14
16
18
20
22
24
26
28
0
30
0
5
10
15
(A)
20
25
30
Idc (A)
Dimensions in mm (not to scale)
11.5 max.
10.0±0.3
4.0±0.2
0.01 min.
P2
P1
2.5
4.0 max.
Connection
Unit : mm
Recommended land patterns in mm (not to scale)
4.6
P2
P1
3.8
6.0
3.8
Unit : mm
■ As for soldering conditions and safety precautions (Power choke coils for consumer use),
please see data files.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
66
15-Sep-20
Power Inductors
Power Choke Coil (Low DCR type)
PCC-M1040L (MC) series
Small mounting size for multi-phase DC/DC converter circuits
Industrial property : Patents 2 (Pending)
Features
●Small type (11.7×10.0×H4.0 mm)
●High power (21 A to 30 A)
●Low loss (DCR : 0.76 to 1.58 mΩ)
●Tighter DCR tolerance (±5 %, ±7 %)
●Suitable for high frequency circuit (up to 1 MHz)
●Low buzz noise due to its gap-less structure
●Shielded construction
●RoHS compliant
Recommended applications
●Notebook and Desktop PC power supply modules
●Servers, Routers, DC/DC converters for driving CPUs
Standard packing quantity (Minimum quantity/Packing unit)
●2,000 pcs/box(2 reel)
Explanation of part numbers
1
2
3
4
5
6
E
T
Q
P
4
L
Classification
Size
Winding
Product code
7
8
9
Inductance
10
11
12
Core
Packaging
Suffix
Standard parts
Part No.
Inductance (at 20℃)*1
L0 at 0A
L1*4
Rated current
(A)*2
Rated current DC resistance
(reference)
(at 20℃)
(A)*3
(mΩ) max.
(μH)
(μH)
Measurement
current
ETQP4LR15AFC
0.15±20 %
(0.13)
42
42
51
0.45±7 %
ETQP4LR36AFC
0.36±20 %
(0.29)
30
30
40
0.76±5 %
ETQP4LR68XFC
0.68±20 %
(0.59)
21
21
28
1.58±5 %
(A)
*1: Inductance is measured at 1.0 MHz.
*2: Rated current defines actual value of DC current, when temperature rise of coil becomes 40 K. (Method A)
*3: Rated current (reference) defines actual value of DC current, when temperature rise of coil becomes 40 K. (Method B)
*4: Reference only
◆ Method A (PANASONIC's standard measurement conditions), Method B (high heat dissipation measurement) is different from
Method A by the measurement methods. In normal application condition, the part's temperature depends on circuit design
and heat dissipation condition. This condition shall be verified by the worst operational condition.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
67
18-Sep-20
Power Choke Coil (Low DCR type)
Performance characteristics (Reference)
Inductance vs DC Current
Case Temperature vs DC Current(Method A)
ETQP4LR68XFC
ETQP4LR36AFC
ETQP4LR15AFC
ETQP4LR68XFC
ETQP4LR36AFC
ETQP4LR15AFC
(uH)
0.80
140
0.70
120
0.60
100
Temp. rise (K)
0.50
0.40
0.30
0.20
80
60
40
20
0.10
0.00
0
0
5
10
15
20
25
(A)
30
35
40
45
50
0
5
10
15
20
25
30
35
40
45
Idc (A)
Dimensions in mm (not to scale)
11.7 max.
10.0±0.3
4.0±0.3
0.01 min.
P1
P2
4.0 max.
2.5
Unit : mm
Connection
Recommended land patterns in mm (not to scale)
4.6
P2
P1
3.8
6.0
3.8
Unit : mm
■ As for soldering conditions and safety precautions (Power choke coils for consumer use),
please see data files.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
68
18-Sep-20
50
Power Inductors
Power Choke Coil
PCC-M1250L (MC) series
High power, Low loss, Low-profile
Industrial property : Patents 2 (Pending)
Features
●High power (25 A to 30 A)
●Low loss (DCR : 0.8 to 1.1 mΩ)
●Tighter DCR tolerance (±5 % to ±7 %)
●Low profile (14.5×12.5×H5.0 mm)
●Suitable for high frequency circuit (up to 1 MHz)
●Low buzz noise due to its gap-less structure
●Shielded construction
●RoHS compliant
Recommended applications
●Notebook and Desktop PC power supply modules
●Servers, Routers, DC/DC converters for driving CPUs
Standard packing quantity (Minimum quantity/Packing unit)
●1,000 pcs/box (2 reel)
Explanation of part numbers
1
2
3
4
5
6
E
T
Q
P
5
L
Classification
Size
Winding
Product code
7
8
9
Inductance
10
11
12
Core
Packaging
Suffix
Standard parts
Inductance (at 20℃)*1
L1
Part No.
Rated current
(A)*2
DC resistance
(at 20℃)
(mΩ)
42
30
0.80±7 %
42
27
1.10±5 %
L2*3
(μH)
Measurement
current
(μH)
Measurement
current
ETQP5LR50XFA
0.50±20 %
30
(0.46)
ETQP5LR60XFA
0.60±20 %
30
(0.54)
(A)
(A)
*1: Inductance is measured at 1.0 MHz.
*2: Rated current defines actual value of DC current, when temperature rise of coil becomes 40 K.
*3: Reference only
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
69
1-Apr-20
Power Choke Coil
Performance characteristics (Reference)
Inductance vs DC Current
Case Temperature vs DC Current
ETQP5LR50XFA
ETQP5LR60XFA
ETQP5LR60XFA
ETQP5LR50XFA
1.0
100
0.9
90
0.8
80
Temp. rise (K)
0.7
(uH)
0.6
0.5
0.4
0.3
60
50
40
30
0.2
20
0.1
0.0
70
10
0
5
10
15
20
25
30
35
40
(A)
0
0
5
10
15
20
25
30
35
40
Idc (A)
Dimensions in mm (not to scale)
14.5 max.
12.5±0.3
4.0±0.2
0.01 min.
P2
P1
(2.5)
5.0 max.
Unit : mm
Connection
Recommended land patterns in mm (not to scale)
4.6
P2
P1
3.8
8.7
3.8
Unit : mm
■ As for soldering conditions and safety precautions (Power choke coils for consumer use),
please see data files.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
70
1-Apr-20
45
Power Choke Coil
Temperature (°C)
Reflow soldering conditions
T3
T2
T1
t1
t2
0
Time
● Pb free solder recommended temperature profile
Power Choke Coils for Consumer use
Series
T1 [℃]
Preheat
t1 [s]
Soldering
t2 [s]
T2 [℃]
Peak temperature
T3
T3 Limit
Time of reflow
PCC-M0730L
PCC-M0740L
PCC-M1040L
150 to 170
60 to 120
230 °C
30 to 40
250 °C, 5 s
260 °C, 10 s
2 times max.
PCC-M1250L
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
71
1-Apr-20
Power Choke Coil
Packaging methods (Taping)
● Embossed carrier tape dimensions in mm (not to scale)
P2
P0
t2
E
t1
W
B
F
A
P1
Tape running direction
Unit : mm
Series
A
B
W
E
F
P1
P2
P0
øD0
t1
t2
PCC-M0730L
7.6
8.9
16
1.75
7.5
12
2
4
1.5
0.4
4.2
PCC-M0740L
7.6
8.9
16
1.75
7.5
12
2
4
1.5
0.4
4.3
PCC-M1040L
10.6
11.8
24
1.75
11.5
16
2
4
1.5
0.4
5.2
PCC-M1250L
13.1
14.8
24
1.75
11.5
16
2
4
1.5
0.4
5.3
A
B
C
D
E
380
80
13
21
2
● Taping reel dimensions in mm (not to scale)
Unit : mm
Series
PCC-M0730L
PCC-M0740L
PCC-M1040L
PCC-M1250L
E
B
C
D
W
17.5
25.4
W
A
Component placement (Taping)
Standard packing quantity/Reel
Serise
Part No.
PCC-M0730L
ETQP3L□□□CFM
PCC-M0740L
ETQP4L□□□AFM
Minimum quantity / Packing unit
Quantity per reel
3,000 pcs / box (2 reel)
1,500 pcs
2,000 pcs / box (2 reel)
1,000 pcs
1,000 pcs / box (2 reel)
500 pcs
ETQP4L□□□WFC
PCC-M1040L
ETQP4L□□□XFC
PCC-M1040L
ETQP4L□□□AFC
ETQP4LR19WFC
PCC-M1250L
ETQP5L□□□XFA
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
72
1-Apr-20
Power Inductors
Application Guidelines (For consumer)
Safety precautions
・ When using our products, no matter what sort of equipment they might be used for, be sure to make a written
agreement on the specifications with us in advance. The design and specifications in this catalog are subject to
change without prior notice.
・ Do not use the products beyond the specifications described in this catalog.
・ This catalog explains the quality and performance of the products as individual components. Before use, check
and evaluate their operations when installed in your products.
・ Install the following systems for a failsafe design to ensure safety if these products are to be used in equipment
where a defect in these products may cause the loss of human life or other significant damage, such as damage
to vehicles (automobile, train, vessel), traffic lights, medical equipment, aerospace equipment, elec tric heating
appliances, combustion/gas equipment, rotating equipment, and disaster/crime prevention equipment.
✽ Systems equipped with a protection circuit and a protection device.
✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault.
Precautions for use
1. Provision to abnormal condition
This power choke coil itself does not have any protective function in abnormal condition such as overload,
short-circuit and open-circuit conditions, etc.
Therefore, it shall be confirmed as the end product that there is no risk of smoking, fire, dielectric withstand
voltage, insulation resistance, etc. in abnormal conditions to provide protective devices and/or protection circuit
in the end product.
2. Temperature rise
Temperature rise of power choke coil depends on the installation condition in end products. It shall be confirmed
in the actual end product that temperature rise of power choke coil is in the limit of specified temperature class.
3. Dielectric strength
Dielectric withstanding test with higher voltage than specific value will damage Insulating material and shorten
its life.
4. Water
This Power choke coil must not be used in wet condition by water, coffee or any liquid because insulation
strength becomes very low in such condition.
5. Potting
If this power choke coil is potted in some compound, coating material of magnet wire might be occasionally
damaged. Please ask us if you intend to pot this power choke coil.
6. Solvent
If this power choke coil is dipped in the cleaning agent, and the coating agent of the toluene and the xylene
system, there is a possibility that the performance decreases greatly. Please ask us if you intend to pot this power
choke coil.
7. Static electricity measures
① Circuit design
Please set up the ESD measures parts such as capacitors in the former steps of this power choke coil for static
electricity when there is a possibility that static electricity is impressed to the choke coil on the circuit.
Moreover, please consult our company about such a case once.
② Treatment with single
Take countermeasures against static electricity when using single power choke coil. (process and equipment)
There is a possibility that the characteristic changes when the voltage of 200 V or more is impressed to this
power choke coil. Please handle 200 V or less.
73
1-Oct-19
Power Inductors
8. Core Chipping and Core Crack
This choke coil has a possibility to make partial chipping or crack in the core due to excessive mechanical
stress from outside, and might have initially a partial chipping and/or cracks that do not affect the quality.
9. Storage temperature
‒5 ℃ to +35 ℃
10. Operating temperature
Minimum temperature
:‒40 ℃ (Ambient temperature of the power choke coil)
Maximum temperature
:130 ℃ (Ambient temperature of the power choke coil plus the temperature rise)
100 ℃ (Only series : PCC-F126F(N6))
11. Model
When this power choke coil is used in a similar or new product to the original one, it might be unable to satisfy
he specifications due to difference of condition of usage.
Please ask us if you use this power choke coil in the manner such as above.
12. Drop
If the power choke coil receives mechanical stress such as drop, characteristics may become poor (due to
damage on coil bobbin, etc.). Never use such stressed power choke coil.
<Package markings>
Package markings include the product number, quantity, and country of origin.
In principle, the country of origin should be indicated in English.
1-Oct-19
74
This series is not a recommended product.
Not recommended for new design.
Voltage Step-up Coils
Chip type
ELT3KN
series
High inductance Voltage Step-up coil chip series for
piezoelectric buzzers and DC/DC circuitry of EL panels
Features
● Small and thin
● High inductance
● RoHS compliant
Recommended applications
● Piezoelectric buzzer, Booster circuit for EL backlight (Watch, Electric thermometer, Portable device)
Standard packing quantity (Minimum quantity/Packing unit)
●1,000 pcs or 5,000 pcs / reel
Explanation of part numbers
1
2
3
4
5
6
7
8
9
10
E
L
T
3
K
N
0
0
4
C
Product code
Outer size
Construction
Design No.
Packaging
Code
Packaging
B
ø 180 Reel
C
ø370 Reel
5.5±0.2
1.1±0.2
1.1±0.2
5.5±0.2
0.8±0.1
0.10±0.05
1.4 max.
(3.1)
4.5±0.2
3.3±0.1
2.5±0.1
1.2±0.1
①
②
④
⑥
0.10±0.05
H
0.8±0.1
4.5±0.2
➄
3.1±0.2
0.25±0.05
(3.3)
0.18±0.05
③
➄
1.2±0.1
3.1±0.2
0.85±0.10
0.18±0.05
0.6±0.1
3.3±0.1
①
④
④
1.1±0.1
D
1.65±0.20
0.125±0.050
(3.3)
0.18±0.05
1.4±0.2
③
③
1.2±0.1
②
②
3.3±0.1
①
5.5±0.2
1.2±0.1
0.6±0.1
3.3±0.2
1.2±0.1
0.85±0.10
3.3±0.1
①
(3.1)
➄
5.5±0.2
B
④
0.85±0.10
1.2±0.1
③
3.3±0.2
(3.1)
➄
④
E
②
2.0±0.2
1.5±0.1
0.18±0.05
③
➄
①
②
②
④
0.6±0.1
1.2±0.1
3.3±0.2
①
3.3±0.1
C
3.3±0.2
0.6±0.1
3.3±0.1
1.2±0.1
A
0.85±0.10
Dimensions in mm (not to scale)
➄
Part Name: ①Core ②Terminal ③Ring ④Coil ⑤Terminal board ⑥Adhesive
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
75
18-Apr-22
Voltage Step-up Coils (Chip type)
Standard parts
Inductance
Part No.
(mH)
ELT3KN004◻
ELT3KN007◻
ELT3KN113◻
ELT3KN126◻
ELT3KN142◻
ELT3KN019◻
ELT3KN109◻
ELT3KN114◻
ELT3KN014◻
ELT3KN018◻
ELT3KN028◻
ELT3KN032◻
ELT3KN101◻
ELT3KN104◻
ELT3KN118◻
ELT3KN121◻
ELT3KN122◻
ELT3KN123◻
ELT3KN124◻
ELT3KN127◻
ELT3KN128◻
ELT3KN129◻
ELT3KN130◻
ELT3KN131◻
ELT3KN020◻
ELT3KN111◻
ELT3KN125◻
ELT3KN041◻
ELT3KN042◻
ELT3KN043◻
ELT3KN139◻
ELT3KN140◻
ELT3KN135◻
ELT3KN136◻
ELT3KN137◻
ELT3KN149◻
ELT3KN151◻
ELT3KN152◻
ELT3KN155◻
ELT3KN162◻
ELT3KN163◻
14.00
20.00
1.00
1.50
0.82
14.00
3.80
2.50
30.00
35.00
50.00
25.00
10.00
1.00
2.50
1.00
2.00
1.00
4.00
0.47
0.56
0.68
2.30
2.00
30.00
7.50
4.00
14.00
20.00
12.00
0.68
0.82
1.10
2.00
4.00
0.33
0.56
0.47
1.10
4.00
1.10
DC resistance
Tolerance(%)
(Ω)
125
170
34
49
24
125
115
83
150
235
250
185
285
35
64
22.5
44
25
85
14
15
17
51
44
150
177
85
125
175
117
19
22
32
55
117
11
17
14
38
117
32
±40
±10
±40
±10
±40
±35
±40
±10
±30
±10
±40
±10
Tolerance(%)
DC current
(mA) max.
1.7
1.4
25.0
29.0
30.0
1.7
15.0
15.0
1.9
1.9
1.4
10.0
1.4
30.0
20.0
40.0
20.0
30.0
15.0
50.0
45.0
34.0
23.0
20.0
2.5
10.0
15.0
1.7
1.4
1.7
40.0
30.0
30.0
20.0
15.0
60.0
50.0
50.0
25.0
15.0
30.0
±10
±15
±10
±20
±15
±10
±15
±10
±15
±10
±15
±10
±15
±10
±15
Magnetic
composition
Dimensions
Permalloy ring
A
Brass ring
Permalloy ring
B
Brass ring
Permalloy ring
C
Brass ring
Permalloy ring
D
Brass ring
Permalloy ring
E
Brass ring
H
Ring less
E
Brass ring
“□” shows the packaging specifications.
Applied diagram examples
〈For buzzer〉
VO
+1.5 V
〈For EL DC/DC〉
+3.0 V
V2
V1
VO
Vi
Vi
Vi
Vi
V1
V2
Load
SC
SC
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
76
18-Apr-22
Voltage Step-up Coils (Chip type)
Temperature (°C)
Reflow soldering conditions
T3
T2
T1
t1
t2
0
Time
● Pb free solder recommended temperature profile
Voltage Step-up Coils
Part No.
ELT3KN
Preheat
Soldering
Peak temperature
T1 [℃]
t1 [s]
T2 [℃]
t2 [s]
T3
T3 Limit
150 to 170
60 to 120
230 ℃
30 max.
245 ℃, 10 s
260 ℃, 10 s
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
77
Time of reflow
2 times max.
6-Aug-21
Voltage Step-up Coils (Chip type)
Packaging methods (Taping)
● Embossed carrier tape dimensions in mm (not to scale)
t1
Chip pocket
Sprocket hole
B
F
A
W
E
øD0
Chip component
P1
Tape running direction
P2 P3
t2
Unit : mm
Part No.
A
B
W
E
F
P1
P2
P0
øD0
t1
t2
ELT3KN
3.7
6.4
12.0
1.75
5.5
8.0
2.0
4.0
1.5
0.3
2.6
● Reel dimensions in mm (not to scale)
T
E
C
B
Unit : mm
D
W
A
Packaging
A
B
C
D
E
W
t
T
B
180
60
13
21
2
13
1.1
15.2
C
370
60
13
21
2
14
2.0
18.0
t
● Leader Part, Vacant Position
Leader part
200 min.
50 min.
Vacant position
Tape end
50 min.
Vacant position
Standard packing quantity
Packaging
Quantity per reel
B
1,000 pcs
C
5,000 pcs
Kind of taping
B 1,000 pcs. Embossed carrier
Embossed carrier taping
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
78
6-Aug-21
Voltage Step-up Coils
Application Guidelines
Safety precautions
・ When using our products, no matter what sort of equipment they might be used for, be sure to make a written agreement on
the specifications with us in advance. The design and specifications in this catalog are subject to change without prior notice.
・ Do not use the products beyond the specifications described in this catalog.
・ This catalog explains the quality and performance of the products as individual components. Before use, check and evaluate
their operations when installed in your products.
・ Install the following systems for a failsafe design to ensure safety if these products are to be used in equipment where a defect in
these products may cause the loss of human life or other significant damage, such as damage to vehicles (automobile, train, vessel),
traffic lights, medical equipment, aerospace equipment, electric heating appliances, combustion/gas equipment, rotating equipment,
and disaster/crime prevention equipment.
✽ Systems equipped with a protection circuit and a protection device.
✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault.
Precautions for use
1. Operation range and environments
① These products are designed and manufactured for general and standard use in general electronic equipment
(e.g. AV equipment, home electric appliances, office equipment, information and communication equipment)
② These products are not designed for the use in the following special conditions. Before using the products,
carefully check the effects on their quality and performance, and determine whether or not they can be used.
・In liquid, such as water, oil, chemicals, or organic solvent
・In direct sunlight, outdoors, or in dust
・In salty air or air with a high concentration of corrosive gas, such as Cl2,H2S,NH3,SO2,or NOx
・In an environment where these products cause dew condensation
2. Handling
① Do not bring magnets or magnetized materials close to the product. The influence of their magnetic field can change the
inductance value.
② Do not apply strong mechanical shocks by either dropping or collision with other parts.
Excessive schock can damage the part.
3. Resoldering with a soldering iron
① Resoldering should be done within 3 seconds by soldering iron, the temperature with 350 °C or less and should be cooling
down after ward. Both side of terminals shall be fixed closely to PWB. And terminals shall not be pressed in heating.
Don’t Press
② The wiring tab shall not be held by sharp-edged tool.
Wiring Tab
③ Iron shall not be put to the component itself.
4. Mounting side
① External force must be less than 4.9N while mounting.
② The wiring tab is expose the terminal, so please be careful when you design PWB pattern of coil circumference.
5. Cleaning
If you clean the inductor, please use own your ultrasonic cleaning to check specified conditions.
6. Storage conditions
Normal temperature (‒5 to 35 ℃), normal humidity (85 %RH max.),shall not be exposed to direct sunlight and harmful
gases and care should be taken so as not to cause dew.
<Package markings>
Package markings include the product number, quantity, and country of origin.
In principle, the country of origin should be indicated in English.
6-Aug-21
79
Safty Precautions
When using our products, no matter what sort of equipment they might be used for,
be sure to confirm the applications and environmental conditions with our specifications in advance.
Industry Co., Ltd.
Device Solutions Business Division
1006 Kadoma, Kadoma City, Osaka
571-8506 Japan
©
6OBVUIPSJ[FEEVQMJDBUJPOPGUIJTDBUBMPHJTTUSJDUMZGPSCJEEFO
5IFDPOUFOUTPGDBUBMPHBSFBTPG+VOF
2022.6