ETQ-P5LR50XFA

Products Catalog Inductors ・For automotive ・For consumer 2023.10 INDUCTORS INDEX Product item Part number Type ∙ Series Safety and Legal Matters to Be Observed Page 1 Matters to Be Observed When Using This Product (Automotive Grade) 2 PCC-M0530M/M0540M PCC-M0630M/M0645M PCC-M0754M/M0750M M series PCC-M0854M/M0850M PCC-M1054M/M1050M 　ETQ P3M□□□Y□□ 　ETQ P4M□□□Y□□ 　ETQ P5M□□□Y□□ 　ETQ P6M□□□YLC/KLC 4 PCC-M1040ML/M1050ML/M1060ML (MC) Power Choke Coils (Automotive grade) MS series PCC-M0854MS/M1050MS (MC) ETQ P5M□□□YSK ETQ P5M□□□YSC 21 MF series PCC-M1280MF/M15A0MF (MC) ETQ P8M□□□JFA ETQ PAM□□□JFW 25 　ETQ P3M□□□KV□ 　ETQ P4M□□□KV□ 33 　ETQ P4M□□□KFN 　ETQ P4M□□□KFM 45 ETQP5M□□□CVM 52 ETQ P3M□□□HF□ 56 ETQ PDH240DTV 61 LP series LE series LL series H series PCC-M0530M-LP/M0630M-LP PCC-M0840M-LP/M1040M-LP (MC) PCC-M0648M-LE PCC-M0748M-LE (MC) PCC-M0750M-LL (Development product) PCC-M0530M-H PCC-M0630M-H (MC) PCC-D1413H (DUST) Power Choke Coils (Consumer use) Soldering conditions (Automotive Grade) 64 Matters to Be Observed When Using This Product (Consumer use) 65 PCC-M0730L (MC) ETQ P3L 66 PCC-M0740L (MC) Low DCR type ETQ P4L 68 PCC-M1040L (MC) ETQ P4L 70 PCC-M1040L (MC) Low DCR type ETQ P4L 72 PCC-M1250L (MC) ETQ P5L 74 Soldering conditions (Consumer use) 76 Packaging methods (Consumer use) 77 Safety and Legal Matters to Be Observed Safety and Legal Matters to Be Observed 　Product specifications and applications ■ Please be advised that this product and product specifications are subject to change without notice for improvement purposes. Therefore, please request and confirm the latest delivery specifications that explain the specifications in detail before the final design, or purchase or use of the product, regardless of the application. In addition, do not use this product in any way that deviates from the contents of the company's delivery specifications. 　 ■ Unless otherwise specified in this catalog or the delivery specifications, this product is intended for use in general electronic equipment (AV products, home appliances, commercial equipment, office equipment, information and communication equipment, etc.). When this product is used for the following special cases, please separately discuss the delivery specifications suited to each application with the company. These include applications requiring special quality and reliability, wherein their failures or malfunctions may directly threaten human life or cause harm to the human body (e.g.: space/aircraft equipment, transportation/traffic equipment, combustion equipment, medical equipment, disaster prevention/crime prevention equipment, safety equipment, etc.). 　 　Safety design and product evaluation ■ Please ensure safety through protection circuits, redundant circuits, etc., in the customer's system design so that a defect in our company's product will not endanger human life or cause other serious damage. ■ This catalog shows the quality and performance of individual parts. The durability of parts varies depending on the usage environment and conditions. Therefore, please ensure to evaluate and confirm the state of each part after it has been mounted in your product in the actual operating environment before use. If you have any doubts about the safety of this product, then please notify us immediately, and be sure to conduct a technical review including the above protection circuits and redundant circuits at your company. 　Laws / Regulations / Intellectual property ■ The transportation of dangerous goods as designated by UN numbers, UN classifications, etc., does not apply to this product. In addition, when exporting products, product specifications, and technical information described in this catalog, please comply with the laws and regulations of the countries to which the products are exported, especially those concerning security export control. ■ Each model of this product complies with the RoHS Directive (Restriction of the use of hazardous substances in electrical and electronic equipment) (2011/65/EU and (EU) 2015/863). The date of compliance with the RoHS Directive and REACH Regulation varies depending on the product model. Further, if you are using product models in stock and are not sure whether or not they comply with the RoHS Directive or REACH Regulation, please contact us by selecting "Sales Inquiry" from the inquiry form. ■ During the manufacturing process of this product and any of its components and materials to be used, Panasonic does not intentionally use ozone-depleting substances stipulated in the Montreal Protocol and specific bromine-based flame retardants such as PBBs (Poly-Brominated Biphenyls) / PBDEs (Poly-Brominated Diphenyl Ethers). In addition, the materials used in this product are all listed as existing chemical substances based on the Act on the Regulation of Manufacture and Evaluation of Chemical Substances. ■ With regard to the disposal of this product, please confirm the disposal method in each country and region where it is incorporated into your company's product and used. 　 ■ The technical information contained in this catalog is intended to show only typical operation and application circuit examples of this product. This catalog does not guarantee that such information does not infringe upon the intellectual property rights of Panasonic or any third party, nor imply that the license of such rights has been granted. Panasonic Industry will assume no liability whatsoever if the use of our company's products deviates from the contents of this catalog or does not comply with the precautions. Please be advised of these restrictions. 30-Jun-23 1 Matters to Be Observed When Using This Product Matters to Be Observed When Using This Product (Power inductor for Automotive) 　Use environments and cleaning conditions ■ This product (capacitor) is intended for standard general-purpose use in electronic equipment, and is not designed for use in the specific environments described below. Using the product in such specific environments or service conditions, therefore, may affect the performance of the product. Please check with us about the performance and reliability of the product first before using the product. (1) A product splashed with water, coffee, etc., is in a wet state. (2) Used in a place where the product is heavily exposed to sea breeze or a corrosive gas, such as Cl2, H2S, NH3, SO2, or NOX. (3) Used in an outdoor environment where the product is exposed to direct sunlight, ozone, radiation, UV-rays, etc., or in a dusty place. ■ Sealing the product with a resin may damage the copper wire insulation cover of the product. In such a case, consult us first. ■ Immersing the product in a solvent, cleaning agent, or coating agent containing toluene or xylene for a long period may result in a significant drop in the performance of the product. In such a case, consult us first. 　Response to anomalies and handling conditions ■ The inductor, as a single component, does not have a protective function against a problem such as overloading, short circuit, or open failure. Make sure to provide a circuit set with a protection device or circuit that protects the inductor, and confirm that smoke generation/ignition, weakened dielectric strength, lower insulation resistance, etc., do not occur. ■ The temperature rise rate of the inductor changes depending on the state in which the inductor is incorporated in the circuit set. Make sure to confirm that the temperature of the inductor is equal to or lower than the temperature corresponding to the specified insulation class (heat-resistant class) when the inductor is incorporated in the circuit set. ■ Applying voltage higher than the specified withstand voltage to the inductor at a dielectric strength test leads to the deterioration of the insulation performance of the inductor. Be careful to avoid this. ■ Handle the inductor while protecting it from static electricity with proper electrostatic control measures. (Process/equipment) Applying voltage equal to or higher than 200 V to the inductor may change its characteristics. Keep voltage applied to the inductor lower than 200 V. ■ The inductor having received mechanical stress as a result of dropping on the floor, etc., may have formed a crack on its bobbin, etc., and therefore the performance of the inductor may have dropped significantly. Avoid using such an inductor. ■ When severe mechanical stress is applied to an inductor, its core may chip or crack. There are also some cases where the core already has a chipped or cracked part. However, this chip or crack is negligible and has no effect on the quality of the inductor. 　Reliability and product life A product conforming to "AEC-Q200" refers to a product having passed some or all of the evaluation test items defined in AEC-Q200. To know the detailed specifications of individual products or specific evaluation test scores, please contact us. We issue a delivery specification sheet for each product ordered. Please confirm with the sheet when you place an order with us. 30-Jun-23 2 Matters to Be Observed When Using This Product / Reference Information 　Circuit design and circuit board design ■ When the inductor is used in a different product set among a series of similar product sets, there are times when the inductor will fail to achieve 100% of its capability because of the difference in service conditions, etc. In such a case, consult us first. ■ When the inductor is used in an audible frequency range (= about 20 Hz to 20 kHz) or burst mode, it may emit a sound (beat) under certain operation conditions (current waveform conditions). This sound may be heard as noise, depending on circuits/board configurations in which the inductor is incorporated. Check for this problem before using the inductor. ■ When there is a possibility that electrostatic noise is applied to circuit components, place an ESD preventing component, such as a capacitor resistant to static electricity, in a preceding stage to the inductor. In such a case, consult us first. ■ To ensure insulation between the internal coil of the inductor and the upper surface of the board, avoid forming patterns or vias in which voltage exceeding the guaranteed operating voltage is applied, on the uppermost layer of the board in counter to the inductor bottom. (DUST series) ■ Do not form a pattern, via, etc., on the counter to the bottom of the inductor. (MC series) * Fig. 1 ■ Keep a component placed around the inductor from being in contact with the surface (top face, side face) of the inductor. (MC series) * Fig. 2 ■ Different from a ferrite core type with a magnetic energy concentration gap, the inductor described herein has a vertical leakage flux distribution. Exercise special caution when using a component or a circuit configuration susceptible to leakage flux from an inductor. Counter to the bottom part 8.4 Top face Counter to the bottom part 8 3.8 Side face (PWB) 2.8 10 Fig.1 Side face Fig.2 Reference information 　Labeling on package On the inductor package, a product number, the number of components, and the place of origin are indicated. Usually, the place of origin is written in English. 30-Jun-23 3 Power Inductors Power Choke Coil (Automotive Grade) PCC-M0530M, M0540M, M0630M, M0645M series PCC-M0754M, M0750M, M0854M, M0850M series PCC-M1054M, M1050M, M1040ML, M1050ML, M1060ML series High heat resistance and high reliability using metal composite core (MC) Industrial property : Patents 21 (Registered 2 / Pending 19) Features ● High heat resistance : Operation up to 150 ℃ including self-heating. (180 ℃ short time*) * Please contact for possible to use over 150 ℃ condition. Temperature up to 180 ℃ may possibly be used. ● High-reliability : : High vibration resistance as result of newly developed integral construction; under severe reliability conditions of automotive and other strenuous applications ● High bias current : Excellent inductance stability using ferrous alloy magnetic material (Fig.1) ● Temp. stability : Excellent inductance stability over broad temp. range (Fig.1) ● Low audible (buzz) noise : A gapless structure achieved with metal composite core ● High efficiency : Low DC resistance of winding and low eddy-current loss of the core ● Shielded construction ● AEC-Q200 compliant ● RoHS compliant (Fig.1) Inductance v.s. DC current, Temp. ETQP5M470YFM (reference) 60 Inductors (μH) 50 40 30 25 °C 100 °C 125 °C 150 °C 20 10 0 0 0.5 1 1.5 2 2.5 3 DC Bias (A) Recommended applications ● Noise filter for various drive circuitry requiring high temp. operation and peak current handling capability ● Boost-Converter, Buck-Converter DC/DC Standard packing quantity (Minimum quantity/Packing unit) : PCC 　 : PCC - ● 1,000 pcs/box (2 reel) ● 2,000 pcs/box (2 reel) M0645M，M0754M，M0750M，M0854M，M0850M， M1054M，M1050M，M1040ML，M1050ML，M1060ML M0530M，M0540M，M0630M Explanation of part numbers 1 2 3 4 E T Q P Product code Classification 5 6 7 8 9 10 11 12 M Height Inductance Winding Core Suffix Size (Example) Code 4R7 220 101 Inductance 4.7 μH 22 μH 100 μH Code P N M K C Size □ 5 mm □ 6 mm □ 7 mm □ 8 mm □ 10 mm Temperature rating Operating temperature range After PWB mounting Storage condition Before PWB mounting Tc : -40 ℃ to +150 ℃ (Including self-temperature rise) Ta : -5 ℃ to +35 ℃ 85%RH max. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 4 5-Jun-23 Power Choke Coil (Automotive Grade) 1. PCC-M0530M / PCC-M0540M series (ETQP3M□□□YFP / ETQP4M□□□YFP) Standard parts DCR (at 20 ℃) （ｍΩ） Inductance*1 Part No. L0 (μH) ETQP3M2R2YFP ETQP3M3R3YFP ETQP4M4R7YFP ETQP4M220YFP Tolerance Typ. (max.) (%) 2.2 3.3 4.6 22.0 22.6 ( 24.8) 31.3 ( 34.4) 36.0 ( 39.6) 163.0 (179.0) ±20 Rated current (A) Typ. (%) ±10 (G) MSL level *5 *6 △L= △T= 40 K*2 Tolerance Vibration resistance (　)*3 –30 %*4 5.8 (4.8) 5.0 (4.1) 4.8 (4.0) 2.3 (1.9) 10.9 8.6 7.7 3.1 Series [Size L×W×H] (mm) PCC-M0530M [5.0×5.5×3.0] PCC-M0540M [5.0×5.5×4.0] 1 10 *1: Measured at 100 kHz *2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with high-heat dissipation (heat dissipation constant 5.5x5.0x3.0 mm : approx. 52 K/W, 5.5x5.0x4.0 mm：approx. 48 K/W). *3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of FR4 t=1.6 mm and DC current is applied. *4: Saturation rated current : DC current which causes L(0) drop –30 %. *5: Vibration resistance conditions : Amplitude: 5 mm or less, sweep speed: 1 oct / min, frequency 5-2000 Hz, 3 directions/2 hours each, total 6 hours *6: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used． ◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150°C should not be exceeded. Please contact for possible to use over 150 ℃ condition. Temperature up to 180 ℃ may possibly be used. Performance characteristics (Reference①) ● Inductance vs DC Current ［ ETQP3M2R2YFP ］ ［ ETQP3M3R3YFP ］ 5 2.0 Inductance (μH) Inductance (μH) 2.5 1.5 1.0 0.5 0.0 0 2 4 6 8 10 12 14 4 3 2 1 0 0 2 4 DC Bias (A) ［ ETQP4M4R7YFP ］ Inductance (μH) Inductance (μH) 4 3 2 1 0 2 4 6 8 8 12 10 14 ［ ETQP4M220YFP ］ 5 0 6 DC Bias (A) 10 12 14 DC Bias (A) 30 25 20 15 10 5 0 0 1 2 3 4 5 DC Bias (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 5 5-Jun-23 Power Choke Coil (Automotive Grade) Performance characteristics (Reference②) ● Case Temperature vs DC Current PWB condition A : Four-layer PWB (1.6 mm FR4).*3 PWB condition B : Multilayer PWB with high heat dissipation performance.*2 ［ ETQP3M3R3YFP ］ Temperature rise ΔT(K) Temperature rise ΔT(K) ［ ETQP3M2R2YFP ］ 80 60 40 20 0 0 1 2 3 4 5 6 7 8 80 60 40 20 0 DC Bias (A) 0 1 4 5 6 7 3.0 3.5 80 Temperature rise ΔT(K) Temperature rise ΔT(K) 3 DC Bias (A) ［ ETQP4M220YFP ］ ［ ETQP4M4R7YFP ］ 80 60 40 20 0 2 0 1 2 3 4 5 6 7 DC Bias (A) 60 40 20 0 0 0.5 1.0 1.5 2.0 2.5 DC Bias (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 6 5-Jun-23 Power Choke Coil (Automotive Grade) 2. PCC-M0630M / PCC-M0645M series (ETQP3M□□□YFN / ETQP4M□□□YFN) Standard parts Inductance*1 Part No. L0 (μH) ETQP3MR68YFN ETQP3M1R0YFN ETQP4M2R2YFN ETQP4M3R3YFN ETQP4M6R8YFN ETQP4M100YFN ETQP4M220YFN ETQP4M330YFN ETQP4M470YFN Tolerance (%) 0.68 1.0 2.2 3.3 6.8 10.0 22.0 33.0 47.0 ±20 DCR (at 20 ℃) （ｍΩ） Rated current (A) Typ. △T= 40 K (%) 6.3 (6.90) 7.9 (8.70) 10.4 (11.44) 16.1 (17.71) 39.3 (43.20) 54.2 (59.60) 126.0 (138.60) 172.0 (189.20) 210.0 (231.00) *3 *5 *6 –30 %*4 24.0 20.0 14.4 13.3 10.0 8.3 6.0 4.1 3.8 (　) 12.0 (9.8) 10.7 (8.8) 10.2 (8.0) 8.2 (6.4) 5.2 (4.1) 4.5 (3.5) 2.9 (2.3) 2.5 (2.0) 2.2 (1.8) ±10 (G) MSL level △L= *2 Tolerance Typ. (max.) Vibration resistance Series [Size L×W×H] (mm) PCC-M0630M [6.0×6.5×3.0] 1 10.0 PCC-M0645M [6.0×6.5×4.5] 3 1 *1: Measured at 100 kHz *2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with high-heat dissipation (heat dissipation constant 6.5x6.0x3.0 mm : approx. 44 K/W, 6.5x6.0x4.5 mm：approx. 37 K/W). *3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of FR4 t=1.6 mm and DC current is applied. *4: Saturation rated current : DC current which causes L(0) drop –30 %. *5: Vibration resistance conditions : Amplitude: 5 mm or less, sweep speed: 1 oct / min, frequency 5-2000 Hz, 3 directions/2 hours each, total 6 hours *6: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used． ◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150°C should not be exceeded. Please contact for possible to use over 150 ℃ condition. Temperature up to 180 ℃ may possibly be used. Performance characteristics (Reference①) ● Inductance vs DC Current ［ ETQP3MR68YFN ］ 0.5 0.4 0.3 0.2 0.1 0.0 0 4 8 12 16 20 0.8 0.6 0.4 0.2 0.0 24 3.0 Inductance (μH) Inductance (μH) Inductance (μH) 0.6 0 5 10 DC Bias (A) DC Bias (A) ［ ETQP4M3R3YFN ］ 1 0 2 4 6 5 4 3 2 15 10 5 DC Bias (A) 5 6 7 20 10 10 12 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 15 20 6 4 2 0 1 2 3 4 5 6 7 8 9 DC Bias (A) 50 ［ ETQP4M470YFN ］ 40 30 20 10 0 DC Bias (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 7 10 DC Bias (A) 8 8 9 10 30 0 8 4 Inductance (μH) Inductance (μH) Inductance (μH) 20 6 3 40 25 4 2 ［ ETQP4M330YFN ］ ［ ETQP4M220YFN ］ 2 1 5 10 DC Bias (A) 30 0 1.0 0.5 0 0 DC Bias (A) 0 1.5 ［ ETQP4M100YFN ］ 1 0 8 10 12 14 16 18 20 2.0 12 Inductance (μH) 2 6 2.5 0.0 0 20 7 3 0 15 ［ ETQP4M6R8YFN ］ 8 Inductance (μH) Inductance (μH) 4 ［ ETQP4M2R2YFN ］ ［ ETQP3M1R0YFN ］ 1.0 0.7 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 DC Bias (A) 5-Jun-23 Power Choke Coil (Automotive Grade) Performance characteristics (Reference②) ● Case Temperature vs DC Current PWB condition A : Four-layer PWB (1.6 mm FR4).*3 PWB condition B : Multilayer PWB with high heat dissipation performance.*2 ［ ETQP3MR68YFN ］ ［ ETQP3M1R0YFN ］ 20 0 0 4 6 60 40 20 0 8 10 12 14 16 18 DC Bias (A) 0 2 4 20 2 4 6 8 10 12 60 40 20 0 0 1 2 3 4 DC Bias (A) 5 6 7 40 20 DC Bias (A) 4 6 8 10 12 14 16 ［ ETQP4M100YFN ］ 60 40 20 0 0 1 2 3 4 5 6 ［ ETQP4M470YFN ］ 80 60 40 20 0 4 DC Bias (A) Temperature rise ΔT(K) Temperature rise ΔT(K) 60 3 2 ［ ETQP4M330YFN ］ 80 2 0 DC Bias (A) 80 1 20 80 ［ ETQP4M220YFN ］ 0 40 0 Temperature rise ΔT(K) 40 0 60 ［ ETQP4M6R8YFN ］ DC Bias (A) Temperature rise ΔT(K) 8 10 12 14 16 18 80 60 0 6 80 DC Bias (A) ［ ETQP4M3R3YFN ］ 80 Temperature rise ΔT(K) 2 Temperature rise ΔT(K) Temperature rise ΔT(K) 40 Temperature rise ΔT(K) Temperature rise ΔT(K) 60 0 ［ ETQP4M2R2YFN ］ 80 80 0 0.5 1 1.5 2 2.5 3 60 40 20 0 0 DC Bias (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 8 0.5 1 1.5 2 2.5 3 DC Bias (A) 5-Jun-23 Power Choke Coil (Automotive Grade) 3. PCC-M0754M / PCC-M750M series (ETQP5M□□□YFM / YGM) Standard parts Inductance*1 Part No. L0 (μH) ETQP5M3R3YFM ETQP5M4R7YFM ETQP5M6R8YFM ETQP5M100YFM ETQP5M220YFM ETQP5M330YFM ETQP5M470YFM ETQP5M680YFM 3.3 4.7 6.8 10.0 22.0 33.0 48.0 68.0 ETQP5M101YGM 95.0 Tolerance (%) ±20 DCR (at 20 ℃) （ｍΩ） Rated current (A) Typ. △T= 40 K (%) 11.9 (13.09) 20.4 (22.50) 26.7 (29.40) 37.6 (41.30) 92.0 (102.00) 120.0 (132.00) 156.0 (172.00) 251.0 (276.10) ±10 (　)*3 10.4 (8.3) 8.0 (6.3) 6.9 (5.5) 5.7 (4.7) 3.7 (3.0) 3.3 (2.6) 2.9 (2.3) 2.3 (1.9) –30 %*4 14.4 13.1 12.1 10.6 5.8 4.8 4.1 3.9 1.9 (1.4) 3.1 348.0 (382.80) (G) MSL level *5 *6 △L= *2 Tolerance Typ. (max.) Vibration resistance Series [Size L×W×H] (mm) 1 PCC-M0754M [7.0×7.5×5.4] 3 PCC-M0750M [7.0×7.5×5.0] 10.0 *1: Measured at 100 kHz *2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with high-heat dissipation (heat dissipation constant 7.5x7.0x5.4 mm : approx. 31 K/W, 7.5x7.0x5.0 mm：approx. 29 K/W). *3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of FR4 t=1.6 mm and DC current is applied. *4: Saturation rated current : DC current which causes L(0) drop –30 %. *5: Vibration resistance conditions : Amplitude: 5 mm or less, sweep speed: 1 oct / min, frequency 5-2000 Hz, 3 directions/2 hours each, total 6 hours *6: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used． ◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150°C should not be exceeded. Please contact for possible to use over 150 ℃ condition. Temperature up to 180 ℃ may possibly be used. Performance characteristics (Reference①) ● Inductance vs DC Current ［ ETQP5M3R3YFM ］ ［ ETQP5M4R7YFM ］ 3 2 1 0 0 5 10 15 6 8 5 7 6 4 3 2 1 0 20 Inductance (μH) Inductance (μH) Inductance (μH) 4 ［ ETQP5M100YFM ］ 0 5 4 2 6 4 8 10 0 20 30 20 10 10 5 0 2 4 6 8 4 DC Bias (A) 5 6 8 10 12 14 16 30 20 10 0 10 0 2 4 6 8 DC Bias (A) ［ ETQP5M680YFM ］ ［ ETQP5M101YGM ］ 100 80 60 40 20 0 3 6 ［ ETQP5M330YFM ］ Inductance (μH) Inductance (μH) 40 2 4 2 DC Bias (A) 15 80 50 1 0 DC Bias (A) ［ ETQP5M470YFM ］ Inductance (μH) 15 20 0 12 14 16 60 0 2 40 DC Bias (A) 0 10 Inductance (μH) Inductance (μH) Inductance (μH) 6 2 3 ［ ETQP5M220YFM ］ 25 8 0 4 DC Bias (A) 10 0 5 1 DC Bias (A) 12 ［ ETQP5M6R8YFM］ 0 1 2 3 4 5 6 7 8 60 40 20 0 0 DC Bias (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 9 1 2 3 4 5 DC Bias (A) 5-Jun-23 Power Choke Coil (Automotive Grade) Performance characteristics (Reference②) ● Case Temperature vs DC Current PWB condition A : Four-layer PWB (1.6 mm FR4).*3 PWB condition B : Multilayer PWB with high heat dissipation performance.*2 ［ ETQP5M4R7YFM ］ 40 20 0 2 4 6 8 10 12 14 60 40 20 0 DC Bias (A) 0 ［ ETQP5M100YFM ］ 40 20 0 4 6 4 DC Bias (A) 8 0 0 60 40 20 0 2 0 1 2 3 4 5 20 0 3 4 8 10 40 20 0 1 2 3 4 5 DC Bias (A) ［ ETQP5M101YGM ］ 80 80 60 40 20 0 6 60 0 Temperature rise ΔT(K) Temperature rise ΔT(K) 40 4 DC Bias (A) ［ ETQP5M330YFM ］ ［ ETQP5M680YFM ］ 60 DC Bias (A) 20 80 ［ ETQP5M470YFM ］ 2 10 40 DC Bias (A) 80 1 8 80 DC Bias (A) 0 6 Temperature rise ΔT(K) Temperature rise ΔT(K) Temperature rise ΔT(K) 60 2 2 60 ［ ETQP5M220YFM ］ 80 0 Temperature rise ΔT(K) 60 0 Temperature rise ΔT(K) ［ ETQP5M6R8YFM］ 80 80 Temperature rise ΔT(K) Temperature rise ΔT(K) ［ ETQP5M3R3YFM ］ 80 0 1 2 3 4 60 40 20 0 DC Bias (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 10 0 0.5 1 1.5 2 2.5 3 DC Bias (A) 5-Jun-23 Power Choke Coil (Automotive Grade) 4. PCC-M0854M / PCC-M0850M series (ETQP5M□□□YFK / GAK / YGK) Standard parts DCR (at 20 ℃) （ｍΩ） Inductance*1 Part No. L0 (μH) ETQP5M100GAK 2.5 3.3 10.0 15.0 22.0 48.0 10.0 ETQP5M101YGK 100.0 ETQP5M2R5YFK ETQP5M3R3YFK ETQP5M100YFK ETQP5M150YFK ETQP5M220YFK ETQP5M470YFK Tolerance (%) Rated current (A) Typ. (%) 31.5 (34.65) (　)*3 14.0 (11.9) 12.5 (10.7) 6.7 (5.7) 5.5 (4.7) 4.8 (4.1) 3.4 (2.9) 6.9 (5.9) –30 %*4 20.1 17.9 13.0 7.2 6.9 5.4 11.1 302.0 (333.00) 2.1 (1.7) 3.0 7.6 (8.40) 9.5 (10.45) 33.4 (36.80) 48.2 (53.10) ±20 ±10 63.0 (70.00) 125.0 (138.00) (G) MSL level *5 *6 △L= △T= 40 K*2 Tolerance Typ. (max.) Vibration resistance Series [Size L×W×H] (mm) 1 PCC-M0854M [8.0×8.5×5.4] 3 PCC-M0850M [8.0×8.5×5.0] 10.0 *1: Measured at 100 kHz *2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with high-heat dissipation (heat dissipation constant 8.5x8.0x5.4 mm : approx. 27 K/W, 8.5x8.0x5.0 mm：approx. 29 K/W). *3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of FR4 t=1.6 mm and DC current is applied. *4: Saturation rated current : DC current which causes L(0) drop –30 %. *5: Vibration resistance conditions : Amplitude: 5 mm or less, sweep speed: 1 oct / min, frequency 5-2000 Hz, 3 directions/2 hours each, total 6 hours *6: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used． ◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150°C should not be exceeded. Please contact for possible to use over 150 ℃ condition. Temperature up to 180 ℃ may possibly be used. Performance characteristics (Reference①) ● Inductance vs DC Current ［ ETQP5M3R3YFK ］ ［ ETQP5M2R5YFK ］ 4 2.0 1.5 1.0 0.5 0.0 0 10 5 20 15 25 12 3 Inductance (μH) 2.5 Inductance (μH) Inductance (μH) 3.0 2 1 0 30 0 5 10 DC Bias (A) ［ ETQP5M150YFK ］ 5 6 4 8 10 12 2 0 2 4 6 8 10 12 14 16 DC Bias (A) ［ ETQ5M470YFK ］ 15 10 5 0 0 2 4 6 8 10 50 40 30 20 10 0 0 DC Bias (A) 2 4 6 8 DC Bias (A) ［ ETQP5M101YGK ］ 120 Inductance (μH) Inductance (μH) 4 0 30 20 ［ ETQP5M100GAK ］ 10 8 6 4 2 0 6 60 DC Bias (A) 12 25 Inductance (μH) Inductance (μH) Inductance (μH) 10 2 20 8 ［ ETQP5M220YFK ］ 25 15 0 15 10 DC Bias (A) 20 0 ［ ETQP5M100YFK ］ 100 80 60 40 20 0 0 2 4 6 8 10 12 14 16 18 20 DC Bias (A) 0 1 2 3 4 5 DC Bias (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 11 5-Jun-23 Power Choke Coil (Automotive Grade) Performance characteristics (Reference②) ● Case Temperature vs DC Current PWB condition A : Four-layer PWB (1.6 mm FR4).*3 PWB condition B : Multilayer PWB with high heat dissipation performance.*2 40 20 0 8 12 16 60 40 20 20 0 0 3 6 DC Bias (A) 40 20 0 3 4 5 6 7 8 Temperature rise ΔT(K) Temperature rise ΔT(K) 60 2 6 DC Bias (A) 8 10 Temperature rise ΔT(K) Temperature rise ΔT(K) 20 4 0 2 20 0 1 2 3 4 5 6 6 8 10 ［ ETQ5M470YFK ］ 40 0 4 DC Bias (A) 7 80 60 40 20 0 0 1 2 3 4 5 DC Bias (A) ［ ETQP5M101YGK ］ 40 2 20 0 60 ［ ETQP5M100GAK ］ 0 40 DC Bias (A) 60 0 18 80 DC Bias (A) 80 15 60 ［ ETQP5M220YFK ］ ［ ETQP5M150YFK ］ 1 12 80 DC Bias (A) 80 0 9 Temperature rise ΔT(K) 4 80 Temperature rise ΔT(K) 60 0 ［ ETQP5M100YFK ］ ［ ETQP5M3R3YFK ］ Temperature rise ΔT(K) Temperature rise ΔT(K) ［ ETQP5M2R5YFK ］ 80 80 60 40 20 0 0 0.5 1.0 1.5 2.0 2.5 3.0 DC Bias (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 12 5-Jun-23 Power Choke Coil (Automotive Grade) 5. PCC-M1054M / PCC-M1050M series (ETQP5M□□□YFC / YGC) Standard parts Inductance*1 Part No. L0 (μH) Tolerance (%) 1.5 2.5 3.3 4.7 10.0 15.0 22.0 33.0 47.0 66.0 3.3 82.0 ETQP5M1R5YFC ETQP5M2R5YFC ETQP5M3R3YFC ETQP5M4R7YFC ETQP5M100YFC ETQP5M150YFC ETQP5M220YFC ETQP5M330YFC ETQP5M470YFC ETQP5M680YFC ETQP5M3R3YGC ETQP5M820YGC ±20 97.0 ETQP5M101YGC DCR (at 20 ℃) （ｍΩ） Rated current (A) Typ. △T= 40 K*2 Tolerance Typ. (max.) (%) 3.8 (4.20) 5.3 (5.90) 7.1 (7.81) 10.2 (11.30) 23.8 (26.20) 35.6 (39.16) 45.0 (50.00) 68.5 (75.40) 99.0 (108.90) 136.0 (149.60) 7.1 (7.81) 194.0 (213.4) (　)*3 21.4 (17.9) 18.1 (15.1) 15.7 (13.1) 13.1 (10.9) 8.5 (7.1) 7.0 (5.8) 6.2 (5.2) 5.0 (4.2) 4.2 (3.5) 3.6 (3.0) 14.7 (11.8) 2.8 (2.2) ±10 208.0 (229.00) 2.7 (2.2) Vibration resistance (G) MSL level *5 *6 Series [Size L×W×H] (mm) 1 PCC-M1054M [10.0×10.7×5.4] 3 PCC-M1050M [10.0×10.7×5.0] △L= –30 %*4 35.1 27.2 22.7 20.0 10.7 12.0 8.8 7.6 6.8 5.2 23.4 4.3 10.0 3.0 *1: Measured at 100 kHz *2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with high-heat dissipation (heat dissipation constant 10.7x10.0x5.4 mm : approx. 23 K/W, 10.7x10.0x5.0 mm：approx. 26 K/W). *3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of FR4 t=1.6 mm and DC current is applied. *4: Saturation rated current : DC current which causes L(0) drop –30 %. *5: Vibration resistance conditions : Amplitude: 5 mm or less, sweep speed: 1 oct / min, frequency 5-2000 Hz, 3 directions/2 hours each, total 6 hours *6: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used． ◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150°C should not be exceeded. Please contact for possible to use over 150 ℃ condition. Temperature up to 180 ℃ may possibly be used. Performance characteristics (Reference①) ● Inductance vs DC Current ［ ETQP5M1R5YFC ］ 0.4 10 20 DC Bias (A) 30 2.0 1.5 1.0 0.5 0.0 40 0 Inductance (μH) Inductance (μH) 2 1 25 0 5 10 15 15 10 5 2 4 6 DC Bias (A) 3 2 1 0 40 4 2 0 2 4 6 8 10 15 10 20 25 30 ［ ETQP5M150YFC ］ 15 10 5 0 8 10 12 14 16 ［ ETQP5M330YFC ］ 20 10 0 2 4 6 DC Bias (A) 8 0 10 60 50 4 6 8 10 12 14 ［ ETQP5M470YFC ］ 40 30 20 10 0 0 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 13 2 DC Bias (A) 30 0 5 20 6 40 0 DC Bias (A) DC Bias (A) ［ ETQP5M220YFC ］ 0 30 8 DC Bias (A) 20 0 20 DC Bias (A) 12 10 0 20 Inductance (μH) Inductance (μH) 3 10 4 ［ ETQP5M100YFC ］ ［ ETQP5M4R7YFC ］ 6 5 4 0 Inductance (μH) 0 ［ ETQP5M3R3YFC ］ Inductance (μH) 0.8 3.0 2.5 Inductance (μH) 1.2 0.0 ［ ETQP5M2R5YFC ］ Inductance (μH) Inductance (μH) 1.6 2 4 6 DC Bias (A) 8 10 5-Jun-23 Power Choke Coil (Automotive Grade) Performance characteristics (Reference①) ［ ETQP5M680YFC ］ Inductors (μH) 60 40 20 3 2 1 0 0 0 1 2 3 4 5 6 7 8 ［ ETQP5M820YGC ］ 100 Inductors (μH) Inductors (μH) ［ ETQP5M3R3YGC ］ 4 80 0 9 5 10 15 20 25 80 60 40 20 0 30 35 0 1 2 3 DC Bias (A) DC Bias (A) 4 5 6 8 7 DC Bias (A) ［ ETQP5M101YGC ］ 120 Inductors (μH) 100 80 60 40 20 0 0 1 2 3 5 4 6 7 DC Bias (A) Performance characteristics (Reference②) 10 15 20 25 30 DC Bias (A) ［ ETQP5M100YFC ］ 80 60 40 20 0 0 2 4 6 8 10 12 0 80 10 60 40 20 0 80 0 1 2 3 4 5 DC Bias (A) 6 20 25 40 20 0 0 2 4 6 DC Bias (A) 8 10 ［ ETQP5M680YFC ］ 80 60 40 20 0 40 20 0 0 0 1 2 3 4 5 6 DC Bias (A) 4 8 12 16 20 24 DC Bias (A) ［ ETQP5M150YFC ］ DC Bias (A) 80 15 60 Temperature rise ΔT(K) Temperature rise ΔT(K) 5 DC Bias (A) ［ ETQP5M470YFC ］ Temperature rise ΔT(K) 0 Temperature rise ΔT(K) 5 60 60 40 20 0 80 0 2 4 6 DC Bias (A) 8 10 60 40 20 0 40 20 0 5 10 15 0 4 8 12 16 80 60 40 20 0 20 DC Bias (A) 0 1 2 3 4 5 6 80 ［ ETQP5M820YGC ］ 60 40 20 0 0 1 2 3 4 DC Bias (A) ［ ETQP5M101YGC ］ 40 20 0 1 2 3 4 5 DC Bias (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 14 7 DC Bias (A) 60 0 20 DC Bias (A) ［ ETQP5M3R3YGC ］ 60 0 ［ ETQP5M4R7YFC ］ 80 ［ ETQP5M330YFC ］ ［ ETQP5M220YFC ］ 80 Temperature rise ΔT(K) 0 20 ［ ETQP5M3R3YFC ］ Temperature rise ΔT(K) 0 40 Temperature rise ΔT(K) 20 60 80 Temperature rise ΔT(K) 40 ［ ETQP5M2R5YFC］ 80 Temperature rise ΔT(K) 60 Temperature rise ΔT(K) ［ ETQP5M1R5YFC ］ 80 Temperature rise ΔT(K) Temperature rise ΔT(K) Temperature rise ΔT(K) ● Case Temperature vs DC Current PWB condition A : Four-layer PWB (1.6 mm FR4).*3 PWB condition B : Multilayer PWB with high heat dissipation performance.*2 5-Jun-23 5 Power Choke Coil (Automotive Grade) 6. PCC-M1040ML / PCC-M1050ML / PCC-M1060ML series (ETQP4M□□□KLC / ETQP5M□□□YLC / ETQP6M□□□YLC / KLC) Standard parts DCR (at 20 ℃) （ｍΩ） Inductance*1 Part No. L0 (μH) Tolerance Typ. (max.) (%) Rated current (A) Typ. Tolerance (%) (　)*3 –30 %*4 0.47 1.53 (1.68) 31.1 (24.9) 47.3 ETQP5MR33YLC 0.33 0.68 1.0 2.0 1.5 2.5 3.3 4.7 14.0 1.1 (1.21) 1.75 (1.93) 2.3 (2.53) 4.6 (5.06) 3.2 (3.52) 4.55 (5.00) 6.0 (6.60) 8.7 (9.57) 28.0 (30.80) 39.7 (33.2) 31.5 (26.3) 27.5 (23.0) 19.4 (16.2) 23.3 (19.5) 19.6 (16.3) 17.0 (14.2) 14.1 (11.8) 7.9(6.5) 56.7 40.0 37.8 31.3 32.0 25.8 26.3 22.5 11.2 ETQP5M1R0YLC ETQP5M2R0YLC ETQP6M1R5YLC ETQP6M2R5YLC ETQP6M3R3YLC ETQP6M4R7YLC ETQP6M150KLC ±20 ±10 (G) MSL level *5 *6 △L= △T= 40 K*2 ETQP4MR47KLC ETQP5MR68YLC Vibration resistance Series [Size L×W×H] (mm) PCC-M1040ML [10.0×10.9×4.0] PCC-M1050ML [10.0×10.9×5.0] 1 10.0 PCC-M1060ML [10.0×10.9×6.0] *1: Measured at 100 kHz *2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with high-heat dissipation (heat dissipation constant 10.9x10.0x4.0 mm : approx. 27 K/W, 10.9x10.0x5.0 mm : approx. 23 K/W, 10.9x10.0x6.0 mm：approx. 23 K/W). *3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of FR4 t=1.6 mm and DC current is applied. *4: Saturation rated current : DC current which causes L(0) drop –30 %. *5: Vibration resistance conditions : Amplitude: 5 mm or less, sweep speed: 1 oct / min, frequency 5-2000 Hz, 3 directions/2 hours each, total 6 hours *6: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used． ◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150°C should not be exceeded. Please contact for possible to use over 150 ℃ condition. Temperature up to 180 ℃ may possibly be used. Performance characteristics (Reference①) ● Inductance vs DC Current ［ ETQP4MR47KLC ］ Inductance (μH) Inductance (μH) 0.6 0.5 0.4 0.3 0.2 0.1 0.0 0 10 20 30 40 50 60 70 0.3 0.2 0.1 0.0 80 ［ ETQP5MR33YLC ］ 0.4 0 10 20 30 ［ ETQP5MR68YLC ］ 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 0 10 20 30 40 50 70 80 0.6 0.4 0.2 0 10 20 30 40 50 60 DC Bias (A) ［ ETQP6M1R5YLC ］ ［ ETQP5M2R0YLC ］ 2.0 Inductance (μH) Inductance (μH) 60 0.8 0.0 60 2.0 1.5 1.0 0.5 0.0 50 ［ ETQP5M1R0YLC ］ 1.2 1.0 DC Bias (A) 2.5 40 DC Bias (A) Inductance (μH) Inductance (μH) DC Bias (A) 0 5 10 15 20 25 30 35 40 45 50 DC Bias (A) 1.5 1.0 0.5 0.0 0 5 10 15 20 25 30 35 40 45 50 DC Bias (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 15 5-Jun-23 Power Choke Coil (Automotive Grade) Performance characteristics (Reference①) ［ ETQP6M3R3YLC ］ ［ ETQP6M2R5YLC ］ Inductance (μH) Inductance (μH) 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 10 20 30 40 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 DC Bias (A) 5 10 4 3 2 1 0 0 5 10 15 20 25 30 20 25 DC Bias (A) 30 35 40 ［ ETQP6M150KLC ］ 5 Inductance (μH) Inductance (μH) ［ ETQP6M4R7YLC ］ 15 35 16.0 14.0 12.0 10.0 8.0 6.0 4.0 2.0 0.0 40 DC Bias (A) 0 2 4 6 8 10 12 14 DC Bias (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 16 5-Jun-23 Power Choke Coil (Automotive Grade) Performance characteristics (Reference②) ［ ETQP4MR47KLC ］ 80 Temperature rise ΔT(K) Temperature rise ΔT(K) ● Case Temperature vs DC Current PWB condition A : Four-layer PWB (1.6 mm FR4).*3 PWB condition B : Multilayer PWB with high heat dissipation performance.*2 60 40 20 0 0 5 10 15 20 25 30 35 40 45 50 ［ ETQP5MR33YLC ］ 80 60 40 20 0 0 10 20 60 40 20 5 10 15 20 25 30 35 40 45 60 40 20 0 Temperature rise ΔT(K) Temperature rise ΔT(K) ［ ETQP5M2R0YLC ］ 60 40 20 5 10 15 0 5 10 15 20 25 30 Temperature rise ΔT(K) Temperature rise ΔT(K) 60 40 20 0 4 8 12 16 20 24 28 0 0 5 10 15 Temperature rise ΔT(K) Temperature rise ΔT(K) 20 25 ［ ETQP6M3R3YLC ］ 80 60 40 20 0 0 5 10 15 20 25 ［ ETQP6M150KLC ］ 60 40 20 10 35 20 ［ ETQP6M4R7YLC ］ 5 30 40 DC Bias (A) 80 0 35 60 DC Bias (A) 0 30 DC Bias (A) ［ ETQP6M2R5YLC ］ 0 25 ［ ETQP6M1R5YLC ］ 80 DC Bias (A) 80 20 DC Bias (A) 80 0 60 80 DC Bias (A) 0 50 ［ ETQP5M1R0YLC ］ Temperature rise ΔT(K) Temperature rise ΔT(K) ［ ETQP5MR68YLC ］ 80 0 40 DC Bias (A) DC Bias (A) 0 30 15 20 DC Bias (A) 80 60 40 20 0 0 2 4 6 8 10 12 DC Bias (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 17 5-Jun-23 Power Choke Coil (Automotive Grade) Dimensions in mm (not to scale) Dimensional tolerance unless noted : ±0.5 Series PCC-M0530M Series PCC-M0540M Series PCC-M0630M Series PCC-M0645M (ETQP3M□□□YFP/ETQP4M□□□YFP) (ETQP3M□□□YFN/ETQP4M□□□YFN) Inductance Suffix Inductance 5.5±0.4 Polarity 1.2 1.2 3.0±0.3 6.0±0.4 3.0±0.3 5.0±0.4 Date Code Suffix 6.5±0.4 Date Code Polarity 1.5 Series H M0530M 3.0 max. M0540M 4.0 max. H 3.0 max. M0645M 4.5 max. Series PCC-M0854M Series PCC-M0850M (ETQP5M□□□YFM/YGM) (ETQP5M□□□YFK/GAK/YGK) Inductance Suffix Suffix Polarity 2.0 2.0 Date Code 3.0±0.3 8.0±0.4 3.0±0.3 8.5±0.4 7.0±0.4 Date Code Series M0630M Series PCC-M0754M Series PCC-M0750M Inductance 7.5±0.4 Polarity 2.0 Series H M0754M 5.4 max. M0750M 5.0 max. Series PCC-M1054M Series PCC-M1050M Series H M0854M 5.4 max. M0850M 5.0 max. Series PCC-M1040ML (ETQP4M□□□KLC) (ETQP5M□□□YFC/YGC) Suffix Suffix Inductance 10.7±0.5 Polarity 2.0 2.0 10.0±0.4 10.0±0.4 4.2±0.3 10.9±0.6 Date Code 4.7±0.3 Inductance 2.0 Unit : mm 0.1 min. H 0.1 min. H Unit : mm Date Code 1.5 Unit : mm 0.05 min. H 0.05 min. H Unit : mm Polarity 2±0.5 2±0.5 M1054M 5.4 max. M1050M 5.0 max. Unit : mm H H 0.05 min. 0.1 min. H Unit : mm Series Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 18 Series H M1040ML 4.0 max. 5-Jun-23 Power Choke Coil (Automotive Grade) Dimensions in mm (not to scale) 10.9±0.6 10.0±0.4 Series PCC-M1050ML Series PCC-M1060ML (ETQP5M□□□YLC/ETQP6M□□□YLC/KLC) Series H 5.0 max. M1060ML 6.0 max. Polarity 1.8 0.05 min. Date Code M1050ML Suffix 7.3±0.3 Inductance 1.8 H Dimensional tolerance unless noted : ±0.5 Recommended land pattern in mm (not to scale) Dimensional tolerance unless noted : ±0.5 (ETQP3M□□□YFN/ETQP4M□□□YFN) 7.1 (ETQP5M□□□YFM/YGM) 8.0 8.4 3.6 6.0 3.6 6.1 Series PCC-M0754M Series PCC-M0750M 3.6 (ETQP3M□□□YFP/ETQP4M□□□YFP) Series PCC-M0630M Series PCC-M0645M 7.0 Series PCC-M0530M Series PCC-M0540M 2.2 2.8 2.8 8.8 Series PCC-M0854M Series PCC-M0850M (ETQP5M□□□YFK/GAK/YGK) 10.0 Series PCC-M1054M Series PCC-M1050M Series PCC-M1040ML 11.7 11.9 (ETQP4M□□□KLC) 4.0 9.0 9.4 4.8 11.0 (ETQP5M□□□YFC/YGC) 3.8 6.1 12.4 13.7 Series PCC-M1050ML Series PCC-M1060ML 5.0 11.0 7.2 5.8 12.7 (ETQP5M□□□YLC/ETQP6M□□□YLC/KLC) 11.9 11.0 7.9 ※Don't wire on the pattern on shaded portion the PWB. Unit : mm ■ As for soldering conditions and safety precautions (Power choke coils (Automotive grade)), please see data files 6.5 13.9 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 19 5-Jun-23 Power Choke Coil (Automotive Grade) Packaging methods (Taping) ● Embossed carrier tape P0 t1 E P2 B W F A P1 Series PCC-M0530M PCC-M0540M PCC-M0630M PCC-M0645M PCC-M0754M/M0750M PCC-M0854M/M0850M PCC-M1054M/M1050M PCC-M1040ML/M1050ML/M1060ML t2 Tape running direction A B 5.6 6.1 7.1 6.6 8.1 9.1 7.6 8.6 10.65 11.75 W 16.0 24.0 E 1.75 F P1 7.5 12.0 11.5 P２ P０ øD0 2.0 4.0 1.5 16.0 Unit : mm t1 t2 3.3 4.3 3.3 5.0 0.4 6.0 0.5 6.35 ● Taping reel Unit : mm E B C øD W Serise PCC-M0530M/M0540M PCC-M0630M/M0645M PCC-M0754M/M0750M PCC-M0854M/M0850M PCC-M1054M/M1050M PCC-M1040ML/M1050ML/M1060ML A B C øD E 330 100 13 21 2 W 17.5 25.5 A Serise M0630M/M0645M M0754M/M0750M M0854M/M0850M Serise M0530M/M0540M M1054M/M1050M M1040ML/M1050ML M1060ML Terminal Parts mounting (Taping) Terminal Standard packing quantity / Reel Serise PCC-M0530M PCC-M0540M PCC-M0630M PCC-M0645M PCC-M0754M PCC-M0750M PCC-M0854M PCC-M0850M PCC-M1054M PCC-M1050M PCC-M1040ML PCC-M1050ML PCC-M1060ML Part No. ETQP3M□□□YFP ETQP4M□□□YFP ETQP3M□□□YFN ETQP4M□□□YFN ETQP5M□□□YFM ETQP5M□□□YGM ETQP5M□□□YFK/GAK ETQP5M□□□YGK ETQP5M□□□YFC ETQP5M□□□YGC ETQP4M□□□KLC ETQP5M□□□YLC ETQP6M□□□YLC/KLC Minimum quantity / Packing unit Quantity per reel 2,000 pcs / box (2 reel) 1,000 pcs 1,000 pcs / box (2 reel) 500 pcs Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 20 5-Jun-23 UPDATE Power Inductors Power Choke Coil (Automotive Grade) PCC-M0854MS series PCC-M1050MS series High heat resistance and high reliability using metal composite core (MC) Industrial property : Patents 18 (Registered 10 / Pending 8) Features ●The vibration-resistant structure achieves a vibration acceleration-resistance of 50 G or higher in 150 ℃ environments ●Reduce core loss in high frequency band (More than 2 MHz) : Operation up to 150 ℃ including self-heating. (180 ℃ short time*) ●High heat resistance * Please contact for possible to use over 150 ℃ condition. Temperature up to 180 ℃ may possibly be used. ●SMD type : High vibration resistance as result of newly developed integral construction; ●High-reliability under severe reliability conditions of automotive and other strenuous applications ●High bias current : Excellent inductance stability using ferrous alloy magnetic material ●Temp. stability : Excellent inductance stability over broad temp. range ●Low audible (buzz) noise : A gapless structure achieved with metal composite core ●High efficiency : Low DC resistance of winding and low eddy-current loss of the core ●Shielded construction ●AEC-Q200 compliant ●RoHS compliant Recommended applications ●ECU placed in the engine itself, mechanical-electrical-integrated ECU ●Noise filter for various drive circuitry requiring high temp. operation and peak current handling capability ●Boost-Converter, Buck-Converter DC/DC Standard packing quantity (Minimum quantity/Packing unit) ● 1,000 pcs/box (2 reel) Temperature rating 1 2 3 4 E T Q P Product code 5 Classification 6 7 8 9 M Height Inductance Winding Code R68 10 11 Y S Core Suffix Inductance 0.68 μH 12 Size Code Size K □ 8 mm C □ 10 mm Temperature rating Operating temperature range Storage condition After PWB mounting Before PWB mounting Tc : -40 ℃ to +150 ℃ (Including self-temperature rise) Ta : -5 ℃ to +35 ℃ 85%RH max. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 21 31-Oct-23 Power Choke Coil (Automotive Grade) Standard parts DCR (at 20 ℃) （ｍΩ） Inductance*1 Part No. L0 (μH) Tolerance △L= *2 △T= 40 K Tolerance Typ. (max.) (%) Rated current (A) Typ. (%) (　)*3 –30 %*4 ETQP5M2R5YSK 2.45 7.4 (8.14) 14.1 (12.0) 21.7 ETQP5MR68YSC 0.68 1.66 (1.83) 32.3 (27.0) 40.0 ETQP5M2R0YSC 1.90 19.8 (16.5) 29.8 ▲ETQP5M220YSC 20.00 6.2 (5.2) 7.9 ▲ETQP5M470YSC NEW ETQP6M2R5YSC 4.45 (4.90) ±20 ±10 45.50 (50.05) 44.00 102.00 (112.20) 2.50 4.1 (3.4) 4.48 (4.93) (G) MSL level *5 *6 Series [Size L×W×H] (mm) PCC-M0854MS [8.0×8.5×5.4] PCC-M1050MS [10.0×10.9×5.0] 50.0 1 PCC-M1056MS [10.0×10.9×5.6] 5.6 19.7 (16.4) Vibration resistance PCC-M1054MS 30.0 23.7 [10.0×10.9×5.4] PCC-M1060MS 50.0 [10.0×10.9×6.0] ▲ Under development *1: Measured at 100 kHz *2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with high-heat dissipation (heat dissipation constant 8.5 x 8.0 x 5.4 mm : approx. 27 K/W, 10.9 x 10.0 mm : approx. 23 K/W). *3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of FR4 t=1.6 mm and DC current is applied. *4: Saturation rated current : DC current which causes L(0) drop –30 %. *5: Vibration resistance conditions : Amplitude: 5 mm or less, sweep speed: 1 oct / min, frequency 5-2000 Hz, 3 directions/2 hours each, total 6 hours *6: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used． ◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150°C should not be exceeded. Please contact for possible to use over 150 ℃ condition. Temperature up to 180 ℃ may possibly be used. Performance characteristics (Reference①) ● Inductance vs DC Current ［ ETQP5M2R5YSK ］ 2.5 0.6 2.0 0.5 1.5 1.0 0.5 0.0 0 5 10 15 ［ ETQP5MR68YSC ］ 0.7 Inductance (μH) Inductance (μH) 3.0 20 25 0.4 0.3 0.2 0.1 0.0 30 0 10 20 DC Bias (A) Inductance (μH) Inductance (μH) 1.5 1.0 0.5 20 10 0 15.0 10.0 5.0 0.0 50 40 30 20.0 DC Bias (A) Inductance (μH) Inductance (μH) 30.0 20.0 10.0 0 1 2 3 4 5 8 10 6 7 ［ ETQP6M2R5YSC ］ 3.0 40.0 0.0 6 4 2 0 DC Bias (A) ［▲ ETQP5M470YSC ］ 50.0 50 ［ ▲ETQP5M220YSC ］ 25.0 2.0 0.0 40 DC Bias (A) ［ ETQP5M2R0YSC ］ 2.5 30 8 2.0 1.0 0.0 9 DC Bias (A) 0 5 10 15 20 25 DC Bias (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 22 30 35 40 ▲ Under development 31-Oct-23 Power Choke Coil (Automotive Grade) Performance characteristics (Reference②) ● Case Temperature vs DC Current PWB condition A : Four-layer PWB (1.6 mm FR4), See also ✽2 PWB condition B : Multilayer PWB with high heat dissipation performance. See also ✽3 ［ ETQP5M2R5YSK ］ ［ ETQP5MR68YSC ］ 80 Temperature rise ΔT(K) Temperature rise ΔT(K) 80 60 40 20 0 0 2 4 6 8 10 12 14 16 18 20 60 40 20 0 0 5 10 15 Temperature rise ΔT(K) Temperature rise ΔT(K) 60 40 20 5 15 10 25 20 30 40 20 10 0 1 0 3 2 Temperature rise ΔT(K) Temperature rise ΔT(K) 5 6 25 30 ［ ETQP6M2R5YSC ］ 50 30 20 10 2 4 DC Bias (A) 40 1 45 30 ［ ▲ETQP5M470YSC ］ 0 40 50 DC Bias (A) 0 35 ［ ▲ETQP5M220YSC ］ ［ ETQP5M2R0YSC ］ 0 30 DC Bias (A) 80 0 25 20 DC Bias (A) 3 4 5 80 60 40 20 0 5 0 15 10 20 DC Bias (A) DC Bias (A) ▲ Under development Dimensions in mm (not to scale) Dimensional tolerance unless noted : ±0.5 Series PCC-M1050MS/54MS/56MS Series PCC-M1060MS Series PCC-M0854MS (ETQP5M□□□YSK) 10.0±0.4 5.08±0.3 Polarity 1.8 0.05 min. 1.3 5.4 max. 1.3 1.8 H Date Code Polarity 0.1 min. Date Code Suffix 7.3±0.3 Inductance 10.9±0.6 Suffix 8.0±0.4 Inductance 8.5±0.4 (ETQP5M□□□YSC/ETQP6M□□□YSC) Unit : mm Series H M105□MS 5.0/5.4/5.6 max. M1060MS 6.0 max. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 23 31-Oct-23 Power Choke Coil (Automotive Grade) Recommended land pattern in mm (not to scale) Dimensional tolerance unless noted : ±0.5 Series PCC-M1050MS/54MS/56MS Series PCC-M1060MS Series PCC-M0854MS (ETQP5M□□□YSC/ETQP6M□□□YSC) 11.9 6 9 7.9 9.5 4.826 10.5 11 (ETQP5M□□□YSK) 6.5 13.9 ※Don't wire on the pattern on shaded portion the PWB. Unit : mm ■ As for soldering conditions and safety precautions (Power choke coils (Automotive grade)), please see data files Packaging methods (Taping) ● Embossed Carrier Tape Dimensions in mm (not to scale) P0 t1 E P2 B W F A P1 Series A 9.1 PCC-M0854MS PCC-M105□MS/M1060MS 10.65 t2 Tape running direction B 8.6 11.75 W 16.0 24.0 E 1.75 F 7.5 11.5 P1 12.0 16.0 P２ P０ øD0 t1 0.4 0.5 2.0 4.0 1.5 A B C øD E 330 100 13 21 2 Unit : mm t2 6.0 6.35 ● Taping Reel Dimensions in mm (not to scale) B E C øD W Standard Reel Dimensions Series PCC-M0854MS PCC-M105□MS/M1060MS Unit : mm W 17.5 25.5 A Component placement (Taping) Serise PCC-M105□MS/M1060MS Terminal Serise PCC-M0854MS Terminal Standard packing quantity / Reel Serise PCC-M0854MS PCC-M105□MS PCC-M1060MS Part No. ETQP5M YSK ETQP5M YSC ETQP6M YSC Minimum quantity / Packing unit 1,000 pcs / box (2 reel) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 24 Quantity per reel 500 pcs 31-Oct-23 UPDATE Power Inductors Power Choke Coil (Automotive Grade) PCC-M1280MF series PCC-M15A0MF series High heat resistance and high reliability using metal composite core (MC) Industrial property : Patents 3 Features ● High heat resistance : Operation up to 160 ℃ including self-heating. (180 ℃ short time*) ● Large current power ：53 A (M1280MF R33 type), 87 A (M15A0MF R33 type) * Please contact for possible to use over 160 ℃ condition. Temperature up to 180 ℃ may possibly be used. ● High vibration resistance ：30 G ● SMD type ● High-reliability : High vibration resistance as result of newly developed integral construction ; ● High bias current : Excellent inductance stability using ferrous alloy magnetic material ● Low audible (buzz) noise : A gapless structure achieved with metal composite core under severe reliability conditions of automotive and other strenuous applications ● Temp. stability : Excellent inductance stability over broad temp. range ● High efficiency : Low DC resistance of winding and low eddy-current loss of the core ● Shielded construction ● AEC-Q200 compliant ● RoHS compliant Recommended applications ● Noise filter for various drive circuitry requiring high temp. operation and peak current handling capability ● Boost-Converter, Buck-Converter DC/DC Standard packing quantity (Minimum quantity/Packing unit) ● 500 pcs/box (2 reels): PCC-M1280MF series (ETQP8M□□□JFA) ● 200 pcs/box (2 reels): PCC-M15A0MF series (ETQPAM□□□JFW) Explanation of part numbers 1 2 3 4 E T Q P Product Code 5 6 7 8 9 M Classification Height Winding Inductance 10 11 J F Core Suffix 12 Size (Example) Code Height Code 8 8 mm R33 Inductance 0.33 μH Code A □ 12 mm Size A 10.5 mm R68 0.68 μH W □ 15 mm 4R7 4.7 μH Temperature rating Operating temperature range Storage condition After PWB mounting Before PWB mounting Tc : -40 ℃ to +160 ℃ (Including self-temperature rise) Ta : -5 ℃ to +35 ℃ 85%RH max. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 25 1-Aug-23 Power Choke Coil (Automotive Grade) 1. PCC-M1280MF series Standard parts DCR (at 20 ℃) （ｍΩ） Inductance*1 Part No. L0 (μH) Tolerance (%) 0.33 0.68 1.0 1.5 2.5 3.3 4.7 ETQP8MR33JFA ETQP8MR68JFA ETQP8M1R0JFA ETQP8M1R5JFA ETQP8M2R5JFA ETQP8M3R3JFA ETQP8M4R7JFA Typ. (max.) (%) *3 (G) MSL level *5 *6 –30 %*4 84.5 56.9 44.4 29.9 32.1 27.6 24.7 (　) 53.5 (44.4) 42.6 (35.4) 38.3 (31.8) 33.3 (27.7) 27.7 (23.0) 23.6 (19.6) 20.2 (16.8) ±10 Vibration resistance △L= △T= 40 K*2 Tolerance 0.7 (0.77) 1.1 (1.21) 1.36 (1.50) 1.8 (1.98) 2.6 (2.86) 3.6 (3.96) 4.9 (5.39) ±20 Rated current (A) Typ. Series [Size L×W×H] (mm) PCC-M1280MF [13.2×12.6×8.0] 1 30.0 PCC-M1280MF [13.1×12.6×8.0] *1: Measured at 100 kHz *2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with high-heat dissipation (heat dissipation constant : approx. 20 K/W). *3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of FR4 t=1.6 mm and DC current is applied. *4: Saturation rated current : DC current which causes L(0) drop –30 %. *5: Vibration resistance conditions : Amplitude: 5 mm or less, sweep speed: 1 oct / min, frequency 5-2000 Hz, 3 directions/2 hours each, total 6 hours *6: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used． ◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +160°C should not be exceeded. Please contact for possible to use over 160 ℃ condition. Temperature up to 180 ℃ may possibly be used. Performance characteristics (Reference①) ● Inductance vs DC Current ［ ETQP8MR68JFA ］ ［ ETQP8MR33JFA ］ 0.25 0.20 0.15 0.10 Inductors (μH) Inductors (μH) Inductors (μH) 1.2 0.6 0.30 0.5 0.4 0.3 0.2 0.1 0.05 0.00 0 20 40 60 80 100 120 0.0 140 160 0 20 40 DC Bias (A) 80 1.0 0.5 30 40 0 10 20 2.0 1.5 1.0 50 60 DC Bias (A) 0.0 30 40 50 60 70 80 ［ ETQP8M3R3JFA ］ 3.0 2.5 0.5 20 0.2 3.5 Inductors (μH) Inductors (μH) 1.5 10 0.4 DC Bias (A) 3.0 0 0.8 0.6 0.0 100 ［ ETQP8M2R5JFA ］ 2.0 Inductors (μH) 60 1.0 DC Bias (A) ［ ETQP8M1R5JFA ］ 0.0 ［ ETQP8M1R0JFA ］ 0.7 0.40 0.35 2.5 2.0 1.5 1.0 0.5 0 10 20 30 40 50 60 0.0 0 10 DC Bias (A) 20 30 40 50 DC Bias (A) ［ ETQP8M4R7JFA ］ 5 Inductors (μH) 4 3 2 1 0 0 10 20 30 40 50 DC Bias (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 26 1-Aug-23 Power Choke Coil (Automotive Grade) Performance characteristics (Reference②) ● Case Temperature vs DC Current PWB condition A : Four-layer PWB (1.6 mm FR4).*3 PWB condition B : Multilayer PWB with high heat dissipation performance.*2 60 40 20 0 10 20 30 40 50 60 70 80 Temperature rise ΔT(K) 80 0 60 40 20 0 80 0 10 20 40 20 20 30 50 60 40 20 0 0 10 20 40 50 DC Bias (A) 60 40 20 0 5 10 15 20 25 40 50 30 35 40 80 60 40 20 0 0 DC Bias (A) 5 10 15 20 25 30 DC Bias (A) Temperature rise ΔT(K) ［ ETQP8M4R7JFA ］ 80 60 40 20 0 0 5 10 15 20 25 30 DC Bias (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 27 60 ［ ETQP8M3R3JFA ］ 80 0 30 DC Bias (A) Temperature rise ΔT(K) 60 10 40 60 ［ ETQP8M2R5JFA ］ Temperature rise ΔT(K) Temperature rise ΔT(K) ［ ETQP8M1R5JFA ］ 80 0 30 80 DC Bias (A) DC Bias (A) 0 ［ ETQP8M1R0JFA ］ ［ ETQP8MR68JFA］ Temperature rise ΔT(K) Temperature rise ΔT(K) ［ ETQP8MR33JFA ］ 1-Aug-23 35 Power Choke Coil (Automotive Grade) 2. PCC-M15A0MF series Standard parts Inductance*1 Part No. ETQPAMR33JFW NEW ETQPAMR68JFW ▲ETQPAM1R0JFW ▲ETQPAM1R5JFW ▲ETQPAM2R5JFW ▲ETQPAM3R3JFW ▲ETQPAM4R7JFW L0 (μH) Tolerance 0.33 0.68 1.0 1.5 2.5 3.3 4.7 (%) ±20 DCR (at 20 ℃) （ｍΩ） Typ. (max.) 0.42 [0.48] 0.70 [0.77] (0.88 [0.97]) (1.10 [1.21]) (1.70 [1.87) (2.40 [2.64]) (3.10 [3.41]) Rated current (A) Typ. △T= 40 K*2 Tolerance (%) ±15 (±15) (±10) △L= (　)*3 –30 %*4 83 [69] 65 [53] (57 [47]) (52 [43]) (42 [34]) (35 [29]) (31 [26]) 103 71 (52) (43) (41) (37) (30) Vibration resistance (G) MSL level *5 *6 30 1 Series [Size L×W×H] (mm) PCC-M15A0MF [17.2×15.6×10.5] ▲ This spec may change because these are under development *1: Measured at 100 kHz *2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with high-heat dissipation (heat dissipation constant : approx. 13.8 K/W). *3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of FR4 t=1.6 mm and DC current is applied. *4: Saturation rated current : DC current which causes L(0) drop –30 %. *5: Vibration resistance conditions : Amplitude: 5 mm or less, sweep speed: 1 oct / min, frequency 5-2000 Hz, 3 directions/2 hours each, total 6 hours *6: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used． ◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +160°C should not be exceeded. Please contact for possible to use over 160 ℃ condition. Temperature up to 180 ℃ may possibly be used. Performance characteristics (Reference①) ● Inductance vs DC Current ［ ETQPAMR33JFW ］ DC Bias (A) DC Bias (A) ［ ▲ETQPAM1R5JFW ］ DC Bias (A) ［ ▲ETQPAM3R3JFW ］ ［ ▲ETQPAM2R5JFW ］ Inductors (μH) Inductors (μH) Inductors (μH) DC Bias (A) ［ ▲ETQPAM1R0JFW ］ Inductors (μH) Inductors (μH) Inductors (μH) ［ ETQPAMR68JFW］ DC Bias (A) DC Bias (A) Inductors (μH) ［ ▲ETQPAM4R7JFW ］ ▲ This spec may change because these are under development DC Bias (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 28 1-Aug-23 Power Choke Coil (Automotive Grade) Performance characteristics (Reference②) ● Case Temperature vs DC Current PWB condition A : Four-layer PWB (1.6 mm FR4).*3 PWB condition B : Multilayer PWB with high heat dissipation performance.*2 ［ ETQPAMR68JFW］ DC Bias (A) DC Bias (A) DC Bias (A) ［ ▲ETQPAM2R5JFW ］ ［ ▲ETQPAM3R3JFW ］ DC Bias (A) Temperature rise ΔT(K) Temperature rise ΔT(K) Temperature rise ΔT(K) ［ ▲ETQPAM1R5JFW ］ ［ ▲ETQPAM1R0JFW ］ Temperature rise ΔT(K) Temperature rise ΔT(K) Temperature rise ΔT(K) ［ ETQPAMR33JFW ］ DC Bias (A) DC Bias (A) Temperature rise ΔT(K) ［ ▲ETQPAM4R7JFW ］ ▲ This spec may change because these are under development DC Bias (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 29 1-Aug-23 Power Choke Coil (Automotive Grade) Dimensions in mm (not to scale) Dimensional tolerance unless noted : ±0.5 ・ETQP8MR33JFA ・ETQPAMR33JFW ・▲ETQPAM2R5JFW ・ETQP8MR68JFA ・ETQPAMR68JFW ・▲ETQPAM3R3JFW ・ETQP8M1R0JFA ・▲ETQPAM1R0JFW ・▲ETQPAM4R7JFW ・ETQP8M1R5JFA ・▲ETQPAM1R5JFW Inductance Inductance 12.6±0.5 15.6 ± 0.5 R33 17.2 ± 0.5 Data code 10.5 max. 8.0 max. 0.05 min. Data code ※ The mounting terminal should not protrude from C 0.05 min. 13.2±0.5 R68 ※ The mounting terminal should not protrude from C Unit : mm Unit : mm Part No. A B C Part No. A B C ETQP8MR33JFA 2.2±0.4 (6.4) 3.10±0.15 ETQPAMR33JFW 3.1±0.8 (5.6) 5.0±0.16 ETQP8MR68JFA 2.0±0.4 (7.1) 2.75±0.16 ETQPAMR68JFW 2.6±0.8 (5.6) 5.0±0.16 ETQP8M1R0JFA 2.0±0.4 (7.1) 2.75±0.16 ▲ETQPAM1R0JFW 2.6±0.8 (5.6) 5.0±0.16 ETQP8M1R5JFA 2.0±0.4 (7.1) 2.75±0.16 ▲ETQPAM1R5JFW 2.6±0.8 (5.6) 5.0±0.16 ▲ETQPAM2R5JFW (2.2) (9.2) (3.2) ▲ETQPAM3R3JFW (2.2) (9.2) (3.2) ▲ETQPAM4R7JFW (1.5) (9.2) (3.2) ▲ This spec may change because these are under development A : Terminal width ・ETQP8M2R5JFA ・ETQP8M3R4JFA ・ETQP8M4R7JFA B : Convex part on the bottom of the product C : Terminal storage portion Inductance 13.1±0.5 12.6±0.5 Unit : mm 3R3 Part No. A B C ETQP8M2R5JFA 1.8±0.4 (7.7) 2.45±0.10 ETQP8M3R3JFA 1.5±0.4 (8.1) 2.25±0.14 ETQP8M4R7JFA 1.25±0.4 (8.1) 2.25±0.14 0.05 min. 8.0 max. Data code ※ The mounting terminal should not protrude from C Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 30 1-Aug-23 Power Choke Coil (Automotive Grade) Recommended land pattern in mm (not to scale) Dimensional tolerance unless not ・ETQP8MR33JFA ・ETQP8M4R7JFA 10 ・ETQP8M3R3JFA 10 3.2 3.4 7.2 Recommend copper pad area 2.0 13.6 Recommend resist opening area ・ETQP8M2R5JFA 5.4 14.8 5.4 7.0 Recommend copper pad area 2.0 13.8 Recommend resist opening area Don't wire this portion with PWB. Don't wire this portion with PWB. 10 20 4.0 5.4 5.4 20 4.0 14.8 5.4 14.8 20 5.5 2.0 13.5 10 5.4 4.0 Recommend copper pad area Recommend resist opening area Don't wire this portion with PWB. ・ETQP8MR68JFA ・ETQP8M1R0JFA ・ETQP8M1R5JFA 10 10 10 4.0 5.4 5.4 4.0 14.8 20 4.0 14.8 5.4 5.4 3.7 20 10 10 4.0 10 6.7 2.0 14.1 6.2 Recommend copper pad area Recommend resist opening area Don't wire this portion with PWB. ・ETQPAMR33JFW ・ETQPAMR68JFW ・▲ETQPAM1R0JFW ・▲ETQPAM1R5JFW 2.0 Recommend copper pad area Recommend resist opening area 14.2 Don't wire this portion with PWB. ・▲ETQPAM2R5JFW ・▲ETQPAM3R3JFW ・▲ETQPAM4R7JFW ▲ This spec may change because these are under development 2.6 4.6 17.8 25 Recommend resist opening area Recommend copper pad area 4 layer PCB/capper thicness：70um 5.6 16.7 Don't wire this portion with PWB. 31 UNit : mm ■ As for soldering conditions and safety precautions (Power choke coils (Automotive grade)), please see data files Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 31 1-Aug-23 Power Choke Coil (Automotive Grade) Packaging methods (Taping) ● Embossed carrier tape dimensions in mm (not to scale) PCC-M1280MF 20.0±0.2 17.7±0.5 A-A’ cross section -0.05 12.9±0.5 1.5+0.1 D P0:28±0.2 D2x:1.5 +0.10 0 D part D detail F:14.2±0.1 P3:28.4±0.1 W:32±0.3 13.35±0.5 0.5 9.6±0.5 D part detail B-B’ cross section A A D P2:2±0.2 B B D2y:1.7 +0.15 1.7 +0.15 -0.05 B A-A’ cross section P1:4±0.2 D1:ø1.5 ±0.1 0 E:1.75±0.1 1.75±0.1 (P4:0±0.2) 28.4±0.1 ３2±0.3 A' 4±0.2 2±0.2 PCC-M15A0MF T:0.5 K0:11.2±0.2 16.5+0.5 B-B’ cross section Unit : mm ● Taping reel dimensions in mm (not to scale) E B C øD W A Standard reel dimensions Series A B C øD E W PCC-M1280MF PCC-M15A0MF 330 330 (100) (100) 13 13 21 21 2 2 33.5 33.5 Unit : mm Parts mounting (Taping) Terminal Terminal Tape running direction Standard packing quantity / Reel Serise PCC-M1280MF PCC-M15A0MF Part No. ETQP8M□□□JFA ETQPAM□□□JFW Minimum quantity / Packing unit 500 pcs / box (2 reels) 200 pcs / box (2 reels) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 32 Quantity per reel 250 pcs 100 pcs 1-Aug-23 UPDATE Power Inductors Power Choke Coil (Automotive Grade) PCC-M0530M-LP, PCC-M0630M-LP series PCC-M0840M-LP, PCC-M1040M-LP series High heat resistance and high reliability using metal composite core (MC) Industrial property : Patents 3 (Registered 2 / Pending 1) Features ●High heat resistance : Operation up to 155 ℃ including self-heating. (180 ℃ short time*) ●Low profile : ３ｍｍ max. height (PCC-M0530M-LP, PCC-M0630M-LP) ４ｍｍ max. height (PCC-M0840M-LP, PCC-M1040M-LP) * Please contact for possible to use over 155 ℃ condition. Temperature up to 180 ℃ may possibly be used. ●SMD type ●High-reliability : High vibration resistance as result of newly developed integral construction ; under severe reliability conditions of automotive and other strenuous applications : Excellent inductance stability using ferrous alloy magnetic material : Excellent inductance stability over broad temp. range : A gapless structure achieved with metal composite core : Low DC resistance of winding and low eddy-current loss of the core ●High bias current ●Temp. stability ●Low audible (buzz) noise ●High efficiency ●Shielded construction ●AEC-Q200 compliant ●RoHS compliant Recommended applications ●Noise filter for various drive circuitry requiring high temp. operation and peak current handling capability ●Boost-Converter, Buck-Converter DC/DC Standard packing quantity (Minimum quantity/Packing unit) ●4,000 pcs/box (2 reel) : PCC-M0530M-LP, M0630M-LP ●1,000 pcs/box (2 reel) : PCC-M0840M-LP, M1040M-LP Explanation of part numbers 1 2 3 4 E T Q P Product code 5 Classification 6 7 8 9 M Height Inductance Winding 10 11 K V Core Suffix 12 Size (Example) Code 4R7 220 R68 Inductance 4.7 μH 22 μH 0.68 μH Code P N K C Size □ 5 mm □ 6 mm □ 8 mm □ 10 mm Temperature rating Operating temperature range Storage condition After PWB mounting Before PWB mounting Tc : -55 ℃ to +155 ℃ (Including self-temperature rise) Ta : -5 ℃ to +35 ℃ 85%RH max. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 33 10-May-23 Power Choke Coil (Automotive Grade) 1. PCC-M0530M-LP series (ETQP3M□□□KVP) Standard parts Part No. NEW DCR (at 20 ℃) （ｍΩ） Inductance*1 L0 (μH) Tolerance 22.0 10.0 6.8 4.7 3.3 2.2 1.5 1.0 0.68 0.47 0.33 ETQP3M220KVP ETQP3M100KVP ETQP3M6R8KVP ETQP3M4R7KVP ETQP3M3R3KVP ETQP3M2R2KVP ETQP3M1R5KVP ETQP3M1R0KVP ETQP3MR68KVP ETQP3MR47KVP ETQP3MR33KVP Typ. (max.) (%) △T= 40 K (%) (　)*3 2.2(1.8) 2.9 (2.4) 3.5 (2.9) 4.1(3.4) 5.4 (4.4) 6.3 (5.2) 8.1 (6.7) 9.0 (7.5) 10.2 (8.4) 11.6 (9.6) 12.7 (10.6) ±10 Vibration resistance (G) MSL level *5 *6 10.0 1 △L= *2 Tolerance 165.0 (181.5) 96.0 (105.60) 65.7 (72.27) 45.6 (50.16) 27.3 (30.03) 20.0 (22.00) 12.0 (13.20) 9.6 (10.56) 7.6 (8.36) 5.8 (6.38) 4.85 (5.34) ±20 Rated current (A) Typ. –30 %*4 2.8 4.2 6.1 6.7 8.0 10.1 12.0 14.1 15.9 17.9 21.8 Series [Size L×W×H] (mm) PCC-M0530M-LP [5.0×5.5×3.0] *1: Measured at 100 kHz *2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with high-heat dissipation (heat dissipation constant 5.5 x 5.0 x 3.0 mm : approx. 51 K/W). *3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of FR4 t=1.6 mm and DC current is applied. *4: Saturation rated current : DC current which causes L(0) drop –30 %. *5: Vibration resistance conditions : Amplitude: 5 mm or less, sweep speed: 1 oct / min, frequency 5-2000 Hz, 3 directions / 4 hours each, total 12 hours *6: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used． ◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +155°C should not be exceeded. Please contact for possible to use over 155 ℃ condition. Temperature up to 180 ℃ may possibly be used. Performance characteristics (Reference①-１) ● Inductance vs DC Current ［ ETQP3M220KVP ］ 25 ［ ETQP3M100KVP ］ 12 10 5 0 0 1 2 3 4 Inductors (μH) Inductors (μH) Inductors (μH) 20 15 8 4 0 DC Bias (A) 4 DC Bias (A) 6 2 2.0 1.0 2 4 6 DC Bias (A) 8 10 0 12 ［ ETQP3M1R5KVP ］ 1.2 Inductors (μH) Inductors (μH) 1.0 0.5 0 0 4 8 12 DC Bias (A) 16 20 4 8 12 6 8 10 2.0 1.5 1.0 0 16 0 4 ［ ETQP3M1R0KVP ］ 0.4 0 10 DC Bias (A) 12 16 20 ［ ETQP3MR68KVP ］ 0.8 0.6 0.4 0.2 0 0 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 34 8 DC Bias (A) 0.8 0 4 DC Bias (A) ［ ETQP3M2R2KVP ］ DC Bias (A) 2.0 1.5 0 Inductors (μH) 0 2 0.5 1 0 0 2.5 Inductors (μH) 3 4 0 8 3.0 4 Inductors (μH) Inductors (μH) 2 ［ ETQP3M3R3KVP ］ ［ ETQP3M4R7KVP ］ 5 6 2 0 5 ［ ETQP3M6R8KVP ］ 8 10 20 DC Bias (A) 30 10-May-23 Power Choke Coil (Automotive Grade) Performance characteristics (Reference①-2) ● Inductance vs DC Current ［ ETQP3MR47KVP ］ 0.4 0.3 0.2 0.1 0 ［ ETQP3MR33KVP ］ 0.4 Inductors (μH) Inductors (μH) 0.5 0 10 20 30 DC Bias (A) 0.3 0.2 0.1 0 40 0 4 8 12 DC Bias (A) 16 20 Performance characteristics (Reference②) ● Case Temperature vs DC Current PWB condition A : Four-layer PWB (1.6 mm FR4).*3 PWB condition B : Multilayer PWB with high heat dissipation performance.*2 Temperature rise ΔT(K) Temperature rise ΔT(K) 60 40 20 0 0 1 2 DC Bias (A) 60 40 20 0 3 0 40 20 3 4 DC Bias (A) 5 Temperature rise ΔT(K) Temperature rise ΔT(K) 20 6 8 DC Bias (A) 10 40 20 0 4 8 12 DC Bias (A) 16 3 4 5 0 2 4 6 60 40 20 0 8 0 2 4 6 8 DC Bias (A) ［ ETQP3M1R0KVP ］ ［ ETQP3MR68KVP ］ 80 60 40 20 0 4 8 12 60 40 20 0 0 DC Bias (A) 60 0 2 ［ ETQP3M2R2KVP ］ 20 ［ ETQP3MR47KVP ］ 80 1 DC Bias (A) 40 0 12 Temperature rise ΔT(K) Temperature rise ΔT(K) 40 4 0 80 80 60 2 20 DC Bias (A) ［ ETQP3M1R5KVP ］ 0 40 0 5 60 0 6 80 0 4 Temperature rise ΔT(K) 2 3 Temperature rise ΔT(K) 60 1 2 60 ［ ETQP3M3R3KVP ］ 80 Temperature rise ΔT(K) Temperature rise ΔT(K) ［ ETQP3M4R7KVP ］ 0 1 80 DC Bias (A) 80 0 ［ ETQP3M6R8KVP ］ ［ ETQP3M100KVP ］ 80 Temperature rise ΔT(K) ［ ETQP3M220KVP ］ 80 4 8 12 16 DC Bias (A) ［ ETQP3MR33KVP ］ 80 60 40 20 0 0 4 8 12 DC Bias (A) 16 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 35 10-May-23 Power Choke Coil (Automotive Grade) 2. PCC-M0630M-LP series (ETQP3M□□□KVN) Standard parts DCR (at 20 ℃) （ｍΩ） Inductance*1 Part No. L0 (μH) Tolerance 33.0 22.0 15.0 10.0 6.8 4.7 3.3 2.2 1.5 1.0 0.68 ETQP3M330KVN ETQP3M220KVN ETQP3M150KVN ETQP3M100KVN ETQP3M6R8KVN ETQP3M4R7KVN ETQP3M3R3KVN ETQP3M2R2KVN ETQP3M1R5KVN ETQP3M1R0KVN ETQP3MR68KVN Tolerance Typ. (max.) (%) (%) 206.0 (226.60) 128.0 (140.80) 99.2 (109.12) 71.0 (78.10) 45.6 (50.16) 29.0 (31.90) 24.1 (26.51) 14.5 (15.95) 11.0 (12.10) 6.2 (6.82) 5.2 (5.72) ±20 Rated current (A) Typ. (G) MSL level *5 *6 10.0 1 △L= *2 △T= 40 K (　)*3 2.1 (1.7) 2.7 (2.2) 3.0 (2.5) 3.6 (2.9) 4.5 (3.6) 5.6 (4.6) 6.1 (5.0) 7.9 (6.5) 9.1 (7.4) 12.1 (9.9) 13.2 (10.8) ±10 Vibration resistance –30 %*4 3.0 4.3 5.1 5.8 8.1 9.8 11.5 12.8 14.2 16.0 20.2 Series [Size L×W×H] (mm) PCC-M0630M-LP [6.0×6.4×3.0] *1: Measured at 100 kHz *2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with high-heat dissipation (heat dissipation constant 6.5 x 6.0 x 3.0 mm : approx. 44 K/W). *3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of FR4 t=1.6 mm and DC current is applied. *4: Saturation rated current : DC current which causes L(0) drop –30 %. *5: Vibration resistance conditions : Amplitude: 5 mm or less, sweep speed: 1 oct / min, frequency 5-2000 Hz, 3 directions / 4 hours each, total 12 hours *6: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used． ◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +155°C should not be exceeded. Please contact for possible to use over 155 ℃ condition. Temperature up to 180 ℃ may possibly be used. Performance characteristics (Reference①) ● Inductance vs DC Current Inductors (μH) 20 10 0 0 1 2 3 4 20 15 10 5 0 5 0 2 DC Bias (A) ［ ETQP3M6R8KVN ］ 2 0 4 8 5 12 ［ ETQP3M1R5KVN ］ 3 2 1 0 0.5 16 DC Bias (A) 4 8 12 16 20 24 20 0 2 6 8 10 12 ［ ETQP3M2R2KVN ］ 2.5 2.0 1.0 0 4 DC Bias (A) 4 8 12 16 1.5 1.0 0.5 0 20 0 4 8 12 16 20 DC Bias (A) ［ ETQP3MR68KVN ］ 0.4 10 4 0.8 0.8 0 8 0 8 6 DC Bias (A) ［ ETQP3M1R0KVN ］ 0 4 2.0 0 20 Inductors (μH) 1.0 12 2 ［ ETQP3M3R3KVN ］ 1.2 Inductors (μH) Inductors (μH) 1.5 8 0 DC Bias (A) 2.0 4 5 3.0 0 16 ［ ETQP3M100KVN ］ 12 DC Bias (A) ［ ETQP3M4R7KVN ］ DC Bias (A) 0 10 0 8 Inductors (μH) 4 0 6 4 6 0 4 15 DC Bias (A) Inductors (μH) Inductors (μH) 8 ［ ETQP3M150KVN ］ 20 Inductors (μH) Inductors (μH) 30 ［ ETQP3M220KVN ］ Inductors (μH) 25 Inductors (μH) ［ ETQP3M330KVN ］ 0.6 0.4 0.2 0 30 0 10 20 30 40 DC Bias (A) DC Bias (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 36 10-May-23 24 Power Choke Coil (Automotive Grade) Performance characteristics (Reference②) ● Case Temperature vs DC Current PWB condition A : Four-layer PWB (1.6 mm FR4).*3 PWB condition B : Multilayer PWB with high heat dissipation performance.*2 40 20 0 1 2 3 60 40 20 0 0 1 DC Bias (A) ［ ETQP3M6R8KVN ］ 40 20 2 4 6 40 20 0 0 2 4 6 8 2 20 12 40 20 0 5 10 0 0 15 4 6 DC Bias (A) ［ ETQP3M2R2KVN ］ 80 60 40 20 0 2 0 2 4 6 8 60 40 20 0 0 4 8 12 DC Bias (A) ［ ETQP3MR68KVN ］ 60 0 5 4 20 80 Temperature rise ΔT(K) 40 3 DC Bias (A) ［ ETQP3M1R0KVN ］ Temperature rise ΔT(K) 60 DC Bias (A) 1 40 ［ ETQP3M3R3KVN ］ 80 8 0 80 60 ［ ETQP3M1R5KVN ］ 4 0 DC Bias (A) 80 0 20 60 DC Bias (A) Temperature rise ΔT(K) 60 0 40 ［ ETQP3M4R7KVN ］ Temperature rise ΔT(K) Temperature rise ΔT(K) 4 80 DC Bias (A) Temperature rise ΔT(K) 3 60 DC Bias (A) 80 0 2 80 Temperature rise ΔT(K) 0 ［ ETQP3M100KVN ］ 80 Temperature rise ΔT(K) Temperature rise ΔT(K) Temperature rise ΔT(K) 60 0 ［ ETQP3M150KVN ］ ［ ETQP3M220KVN ］ 80 Temperature rise ΔT(K) ［ ETQP3M330KVN ］ 80 20 DC Bias (A) 60 40 20 0 0 5 10 15 20 DC Bias (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 37 10-May-23 Power Choke Coil (Automotive Grade) 3. PCC-M0840M-LP series (ETQP4M□□□KVK) Standard parts DCR (at 20 ℃) （ｍΩ） Inductance*1 Part No. L0 (μH) Tolerance 33.0 22.0 15.0 10.0 6.8 4.7 3.3 2.2 1.5 1.0 0.68 ETQP4M330KVK ETQP4M220KVK ETQP4M150KVK ETQP4M100KVK ETQP4M6R8KVK ETQP4M4R7KVK ETQP4M3R3KVK ETQP4M2R2KVK ETQP4M1R5KVK ETQP4M1R0KVK ETQP4MR68KVK Tolerance Typ. (max.) (%) (%) 118.0 (129.80) 78.4 (86.24) 55.0 (60.50) 41.6 (45.76) 23.5 (25.85) 16.1 (17.71) 14.1 (15.51) 8.5 (9.35) 4.9 (5.39) 3.7 (4.07) 2.92 (3.21) ±20 Rated current (A) Typ. (G) MSL level *5 *6 5.0 1 △L= *2 △T= 40 K (　)*3 3.1 (2.6) 3.8 (3.2) 4.5 (3.8) 5.2 (4.4) 6.9 (5.9) 8.3 (7.1) 8.9 (7.6) 11.4 (9.8) 15.1 (12.8) 17.3 (14.8) 19.5 (16.6) ±10 Vibration resistance –30 %*4 4.7 6.0 7.6 9.1 11.0 15.1 17.4 20.4 22.5 24.4 29.0 Series [Size L×W×H] (mm) PCC-M0840M-LP [8.0×8.4×4.0] *1: Measured at 100 kHz *2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with high-heat dissipation (heat dissipation constant 8.5×8.0×4.0 mm : approx. 36 K/W). *3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of FR4 t=1.6 mm and DC current is applied. *4: Saturation rated current : DC current which causes L(0) drop –30 %. *5: Vibration resistance conditions : Amplitude: 5 mm or less, sweep speed: 1 oct / min, frequency 5-2000 Hz, 3 directions / 4 hours each, total 12 hours *6: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used． ◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +155°C should not be exceeded. Please contact for possible to use over 155 ℃ condition. Temperature up to 180 ℃ may possibly be used. Performance characteristics (Reference①) ● Inductance vs DC Current 0 2 4 6 15 10 5 0 8 0 DC Bias (A) ［ ETQP4M6R8KVK ］ DC Bias (A) 5 10 15 DC Bias (A) ［ ETQP4M1R5KVK ］ 1.0 0.5 20 DC Bias (A) 30 40 3 2 1 0 10 20 30 1.0 0 10 20 30 30 0 4 8 12 16 DC Bias (A) ［ ETQP4M2R2KVK ］ 2.5 2.0 1.5 1.0 0.5 0 0 10 20 30 DC Bias (A) ［ ETQP4MR68KVK ］ 0.8 0.4 10 20 DC Bias (A) 0.8 0 4 0 12 2.0 0 ［ ETQP4M1R0KVK ］ 0 8 ［ ETQP4M3R3KVK ］ 1.2 Inductors (μH) 1.5 10 4 DC Bias (A) 2.0 0 0 3.0 0 20 5 8 DC Bias (A) Inductors (μH) 0 10 0 12 Inductors (μH) Inductors (μH) Inductors (μH) 2 0 Inductors (μH) 8 4 4 0 4 15 ［ ETQP4M4R7KVK ］ 5 6 ［ ETQP4M100KVK ］ 12 Inductors (μH) 10 Inductors (μH) 20 8 ［ ETQP4M150KVK ］ 20 20 Inductors (μH) Inductors (μH) 30 0 ［ ETQP4M220KVK ］ 25 Inductors (μH) ［ ETQP4M330KVK ］ 0.6 0.4 0.2 0 40 DC Bias (A) 0 10 20 30 40 50 DC Bias (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 38 10-May-23 40 Power Choke Coil (Automotive Grade) Performance characteristics (Reference②) ● Case Temperature vs DC Current PWB condition A : Four-layer PWB (1.6 mm FR4).*3 PWB condition B : Multilayer PWB with high heat dissipation performance.*2 40 20 0 1 2 3 4 5 60 40 20 0 0 1 DC Bias (A) 60 40 20 0 2 4 6 8 20 0 4 15 DC Bias (A) 20 25 20 0 40 20 5 10 15 0 2 20 6 4 8 ［ ETQP4M2R2KVK ］ 60 40 20 0 12 0 4 8 12 16 DC Bias (A) ［ ETQP4MR68KVK ］ 60 0 8 4 DC Bias (A) 80 0 0 DC Bias (A) 40 0 12 8 Temperature rise ΔT(K) 20 6 60 ［ ETQP4M1R0KVK ］ Temperature rise ΔT(K) 40 4 2 20 80 DC Bias (A) 60 10 0 40 ［ ETQP4M3R3KVK ］ 40 0 10 80 5 0 80 60 ［ ETQP4M1R5KVK ］ 0 20 60 DC Bias (A) Temperature rise ΔT(K) Temperature rise ΔT(K) Temperature rise ΔT(K) 6 80 DC Bias (A) Temperature rise ΔT(K) 5 40 ［ ETQP4M4R7KVK ］ ［ ETQP4M6R8KVK ］ 0 4 3 60 DC Bias (A) 80 0 2 80 Temperature rise ΔT(K) 0 80 Temperature rise ΔT(K) Temperature rise ΔT(K) Temperature rise ΔT(K) 80 60 ［ ETQP4M100KVK ］ ［ ETQP4M150KVK ］ ［ ETQP4M220KVK ］ Temperature rise (ΔTK) ［ ETQP4M330KVK ］ 80 80 60 40 20 0 25 DC Bias (A) 0 10 20 30 DC Bias (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 39 10-May-23 Power Choke Coil (Automotive Grade) 4. PCC-M1040M-LP series (ETQP4M□□□KVC) Standard parts DCR (at 20 ℃) （ｍΩ） Inductance*1 Part No. L0 (μH) Tolerance 100.0 68.0 47.0 33.0 22.0 15.0 10.0 6.8 4.7 3.3 2.2 1.5 1.0 ETQP4M101KVC ETQP4M680KVC ETQP4M470KVC ETQP4M330KVC ETQP4M220KVC ETQP4M150KVC ETQP4M100KVC ETQP4M6R8KVC ETQP4M4R7KVC ETQP4M3R3KVC ETQP4M2R2KVC ETQP4M1R5KVC ETQP4M1R0KVC 242.0 (266.20) 178.4 (196.24) 132.0 (145.20) 84.6 (93.06) 60.0 (66.00) 37.0 (40.70) 25.4 (27.94) 18.5 (20.35) 12.3 (13.53) 9.4 (10.34) 6.8 (7.48) 4.9 (5.39) 2.6 (2.86) ±20 △T= 40 K (%) (　)*3 2.5 (2.0) 2.9 (2.4) 3.4 (2.8) 4.2 (3.4) 5.0 (4.1) 6.3 (5.2) 7.6 (6.3) 8.9 (7.4) 11.2 (9.2) 12.6 (10.3) 14.8 (12.1) 17.4 (14.3) 23.9 (19.6) ±10 Vibration resistance (G) MSL level *5 *6 5.0 1 △L= *2 Tolerance Typ. (max.) (%) Rated current (A) Typ. –30 %*4 3.5 4.7 4.7 5.6 7.4 9.2 10.8 12.1 13.9 17.1 21.0 25.0 34.6 Series [Size L×W×H] (mm) PCC-M1040M-LP [10.0×10.7×4.0] *1: Measured at 100 kHz *2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with high-heat dissipation (heat dissipation constant 10.7×10.0×4.0 mm : approx. 27 K/W). *3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of FR4 t=1.6 mm and DC current is applied. *4: Saturation rated current : DC current which causes L(0) drop –30 %. *5: Vibration resistance conditions : Amplitude: 5 mm or less, sweep speed: 1 oct / min, frequency 5-2000 Hz, 3 directions / 4 hours each, total 12 hours *6: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used． ◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +155°C should not be exceeded. Please contact for possible to use over 155 ℃ condition. Temperature up to 180 ℃ may possibly be used. Performance characteristics (Reference①) ● Inductance vs DC Current 70 60 Inductors (μH) 80 60 40 20 50 40 30 20 10 0 1 2 3 4 5 6 0 7 0 DC Bias (A) Inductors (μH) Inductors (μH) 20 15 10 5 8 5 6 7 10 0 8 5 0 12 12 10 4 8 12 16 1 DC Bias (A) 30 ［ ETQP4M100KVC ］ 1.0 0 10 20 8 4 0 4 8 12 16 2 1.5 1.0 0.5 0 10 20 30 40 DC Bias (A) DC Bias (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 40 8 6 10 6 4 2 0 5 10 15 20 25 DC Bias (A) 2.0 0 30 4 ［ ETQP4M6R8KVC ］ 0 20 ［ ETQP4M2R2KVC ］ 2.0 0 0 DC Bias (A) 2.5 Inductors (μH) 2 0 8 6 10 DC Bias (A) ［ ETQP4M3R3KVC ］ Inductors (μH) 3 20 4 8 0 0 3.0 4 10 2 DC Bias (A) ［ ETQP4M4R7KVC ］ 0 0 20 DC Bias (A) 15 5 Inductors (μH) 4 20 ［ ETQP4M150KVC ］ DC Bias (A) 0 3 30 Inductors (μH) 20 25 4 2 30 40 DC Bias (A) ［ ETQP4M220KVC ］ 0 1 ［ ETQP4M330KVC ］ Inductors (μH) 0 ［ ETQP4M470KVC ］ 2.0 Inductors (μH) Inductors (μH) 100 0 50 80 Inductors (μH) ［ ETQP4M680KVC ］ ［ ETQP4M101KVC ］ Inductors (μH) 120 ［ ETQP4M1R5KVC ］ 1.5 1.0 0.5 0 0 10 20 30 40 50 DC Bias (A) 10-May-23 Power Choke Coil (Automotive Grade) Performance characteristics (Reference①) ● Inductance vs DC Current ［ ETQP4M1R0KVC ］ Inductors (μH) 1.2 0.8 0.4 0 0 10 20 30 40 50 60 DC Bias (A) Performance characteristics (Reference②) ● Case Temperature vs DC Current PWB condition A : Four-layer PWB (1.6 mm FR4).*3 PWB condition B : Multilayer PWB with high heat dissipation performance.*2 20 0 1 2 3 4 40 20 0 0 1 ［ ETQP4M220KVC ］ 20 6 8 60 40 20 0 0 2 40 20 0 4 8 12 16 DC Bias (A) Temperature rise ΔT(K) 80 4 6 8 0 ［ ETQP4M3R3KVC ］ 60 40 20 0 0 4 8 12 1 2 3 4 5 40 20 0 0 40 20 0 2 4 6 8 80 16 10 40 20 10 20 DC Bias (A) DC Bias (A) 4 5 60 40 20 0 0 4 8 12 ［ ETQP4M1R5KVC ］ 80 60 40 20 0 0 10 20 DC Bias (A) ［ ETQP4M1R0KVC ］ 60 40 20 0 0 10 20 30 DC Bias (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 41 6 DC Bias (A) ［ ETQP4M2R2KVC ］ 0 3 80 12 60 0 2 ［ ETQP4M6R8KVC ］ ［ ETQP4M100KVC ］ 60 0 1 DC Bias (A) DC Bias (A) Temperature rise ΔT(K) 80 Temperature rise ΔT(K) Temperature rise ΔT(K) ［ ETQP4M4R7KVC ］ 60 0 0 DC Bias (A) DC Bias (A) 80 20 80 Temperature rise ΔT(K) 40 4 40 60 DC Bias (A) 80 Temperature rise ΔT(K) Temperature rise ΔT(K) 60 2 4 ［ ETQP4M150KVC ］ 80 0 0 3 2 60 DC Bias (A) DC Bias (A) 80 Temperature rise ΔT(K) 0 60 ［ ETQP4M330KVC ］ ［ ETQP4M470KVC ］ Temperature rise ΔT(K) 40 80 Temperature rise ΔT(K) 60 ［ ETQP4M680KVC ］ 80 Temperature rise ΔT(K) ［ ETQP4M101KVC ］ Temperature rise ΔT(K) Temperature rise ΔT(K) 80 10-May-23 Power Choke Coil (Automotive Grade) Dimensions in mm (not to scale) Dimensional tolerance unless noted : ±0.5 Series PCC-M0530M-LP Series PCC-M0630M-LP (ETQP3M□□□KVP) (ETQP3M□□□KVN) Inductance Suffix 6.0±0.4 2.54±0.3 Date Code Polarity Polarity 1.04±0.4 0.05 min. 0.05 min. Series PCC-M0840M-LP Series PCC-M1040M-LP (ETQP4M□□□KVK) (ETQP4M□□□✽KVC) ✽Exemption 1R0 Inductance Suffix 10.0±0.4 5.08±0.3 Polarity 1.3±0.4 Date Code 1.3±0.4 Polarity 2.08±0.4 2.08±0.4 4.0 max. 4.0 max. 0.05 min. Suffix 10.7±0.4 8.0±0.4 8.5±0.4 3.0±0.3 Inductance Date Code 1.04±0.4 1.0±0.4 3.0 max. 1.0±0.4 3.0 max. Date Code Suffix 6.4±0.4 5.0±0.4 5.5±0.4 3.18±0.3 Inductance 0.05 min. Series PCC-M1040M-LP (ETQP4M1R0KVC) Inductance Suffix Date Code 4.7±0.3 10.0±0.4 10.7±0.4 Polarity 2.15±0.5 4.0 max. 2.15±0.5 Unit : mm 0.05 min. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 42 10-May-23 Power Choke Coil (Automotive Grade) Recommended land pattern in mm (not to scale) Dimensional tolerance unless noted : ±0.5 (ETQP3M□□□KVP) Series PCC-M0630M-LP (ETQP3M□□□KVN) Series PCC-M0840M-LP (ETQP4M□□□KVK) 9.5 2.946 7.0 3.429 6.0 2.79 6.5 5.334 7.4 9.0 Series PCC-M0530M-LP 3.429 6.756 4.826 8.255 9.652 Series PCC-M1040M-LP Series PCC-M1040M-LP (ETQP4M1R0KVC) (ETQP4M□□□✽KVC)✽Exemption 1R0 4.953 11.0 3.251 5.187 5.842 12.065 12.192 11.0 11.7 11.7 ※Don't wire on the pattern on shaded portion the PWB. Unit : mm ■ As for soldering conditions and safety precautions (Power choke coils (Automotive grade)), please see data files Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 43 10-May-23 Power Choke Coil (Automotive Grade) Packaging methods (Taping) ● Embossed carrier tape dimensions in mm (not to scale) P0 B W F A t2 t1 E P2 øD0 P1 Tape running direction Unit : mm Series A B W E F P1 PCC-M0530M-LP 5.6 6.1 12 1.75 5.5 8 2 4 1.5 0.3 3.3 PCC-M0630M-LP 6.5 7.1 16 1.75 7.5 8 2 4 1.5 0.3 3.3 PCC-M0840M-LP 8.63 9.1 16 1.75 7.5 12 2 4 1.5 0.4 6.0 PCC-M1040M-LP 10.65 11.75 24 1.75 11.5 16 2 4 1.5 0.5 6.35 A B C øD E W 13.5 330 (100) 13 21 2 17.5 P２ P０ øD0 t1 t2 ● Taping reel dimensions in mm (not to scale) Unit : mm Series PCC-M0530M-LP PCC-M0630M-LP PCC-M0840M-LP PCC-M1040M-LP B E C øD 25.5 W A Terminal Parts mounting (Taping) Standard packing quantity / Reel Serise Part No. PCC-M0530M-LP ETQP3M□□□KVP PCC-M0630M-LP ETQP3M□□□KVN PCC-M0840M-LP ETQP4M□□□KVK PCC-M1040M-LP ETQP4M□□□KVC Minimum quantity / Packing unit Quantity per reel 4,000 pcs / box (2 reel) 2,000 pcs 1,000 pcs / box (2 reel) 500 pcs Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 44 10-May-23 Power Inductors Power Choke Coil (Automotive Grade) PCC-M0648M-LE series PCC-M0748M-LE series High heat resistance and high reliability using metal composite core (MC) Industrial property : Patents 3 (Registered 2 / Pending 1) Features ● Low loss (Low DC resistance) ● High heat resistance : Operation up to 150 ℃ including self-heating. (180 ℃ short time*) * Please contact for possible to use over 150 ℃ condition. Temperature up to 180 ℃ may possibly be used. ● SMD type ● High-reliability : High vibration resistance as result of newly developed integral construction ; ● High bias current : Excellent inductance stability using ferrous alloy magnetic material ● Low audible (buzz) noise : A gapless structure achieved with metal composite core under severe reliability conditions of automotive and other strenuous applications ● Temp. stability : Excellent inductance stability over broad temp. range ● High efficiency : Low DC resistance of winding and low eddy-current loss of the core ● Shielded construction ● AEC-Q200 compliant ● RoHS compliant Recommended applications ● Noise filter for various drive circuitry requiring high temp. operation and peak current handling capability ● Boost-Converter, Buck-Converter DC/DC Standard packing quantity (Minimum quantity/Packing unit) ● 1,000 pcs/box (2 reel) Explanation of part numbers 1 2 3 4 E T Q P Product code Classification 5 6 7 8 9 M Height Inductance Winding 10 11 K F Core Suffix 12 Size (Example) Code 4R7 220 Inductance 4.7 μH 22 μH Code N M Size □ 6 mm □ 7 mm Temperature rating Operating temperature range After PWB mounting Storage condition Before PWB mounting Tc : -40 ℃ to +150 ℃ (Including self-temperature rise) Ta : -5 ℃ to +35 ℃ 85%RH max. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 45 31-Oct-23 Power Choke Coil (Automotive Grade) 1. PCC-M0648M-LE series (ETQP4M□□□KFN) Standard parts DCR (at 20 ℃) （ｍΩ） Inductance*1 Part No. L0 (μH) Tolerance Typ. (max.) (%) Rated current (A) Typ. Tolerance (%) (　)*3 3.3 13.1 (14.41) 9.2 (7.2) 12.2 4.7 20.7 (22.77) 7.3 (5.7) 10.2 5.9 (4.6) 9.9 5.2 (4.1) 9.1 ETQP4M6R8KFN 6.8 ETQP4M100KFN 10.0 ETQP4M150KFN 15.0 63.8 (70.18) 4.2 (3.3) 6.9 ETQP4M220KFN 22.0 113.0 (124.3) 3.1 (2.4) 4.1 40.4 (44.44) ±10 MSL level *5 *6 4.4 1 –30 %*4 ETQP4M4R7KFN 32.1 (35.31) (G) △L= △T= 40 K*2 ETQP4M3R3KFN ±20 Vibration resistance Series [Size L×W×H] (mm) PCC-M0648M-LE [6.0×6.4×4.8] *1: Measured at 100 kHz *2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with high-heat dissipation (heat dissipation constant 6.4 x 6.0 x 4.8 mm : approx. 36 K/W). *3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of FR4 t=1.6 mm and DC current is applied. *4: Saturation rated current : DC current which causes L(0) drop –30 %. *5: Vibration resistance conditions : Amplitude: 5 mm or less, sweep speed: 1 oct / min, frequency 5-2000 Hz, 3 directions/2 hours each, total 6 hours *6: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used． ◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150°C should not be exceeded. Please contact for possible to use over 150 ℃ condition. Temperature up to 180 ℃ may possibly be used. Performance characteristics (Reference①) ● Inductance vs DC Current 6 Inductance (μH) Inductance (μH) ［ ETQP4M4R7KFN ］ ［ ETQP4M3R3KFN ］ 4 3 2 1 0 0 2 4 6 8 10 12 14 5 4 3 2 1 0 16 0 2 4 6 DC Bias (A) ［ ETQP4M6R8KFN ］ 6 4 2 0 0 2 4 6 8 12 10 14 4 2 0 2 4 20 Inductance (μH) Inductance (μH) 16 12 8 4 4 5 6 8 10 12 14 16 7 8 9 10 ［ ETQP4M220KFN ］ 15 10 5 0 3 6 DC Bias (A) 25 2 16 6 0 16 ［ ETQP4M150KFN ］ 1 14 8 20 0 12 10 DC Bias (A) 0 10 ［ ETQP4M100KFN ］ 12 Inductance (μH) Inductance (μH) 8 8 DC Bias (A) 0 1 2 3 4 5 DC Bias (A) DC Bias (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 46 31-Oct-23 Power Choke Coil (Automotive Grade) Performance characteristics (Reference②) ● Case Temperature vs DC Current PWB condition A : Four-layer PWB (1.6 mm FR4).*3 PWB condition B : Multilayer PWB with high heat dissipation performance.*2 ［ ETQP4M4R7KFN ］ Temperature rise ΔT(K) Temperature rise ΔT(K) ［ ETQP4M3R3KFN ］ 80 60 40 20 0 0 2 4 6 8 10 12 14 80 60 40 20 0 0 2 4 DC Bias (A) Temperature rise ΔT(K) Temperature rise ΔT(K) ［ ETQP4M6R8KFN ］ 80 60 40 20 0 0 1 3 2 4 5 6 7 8 60 40 20 0 0 1 2 Temperature rise ΔT(K) Temperature rise ΔT(K) 40 20 0 4 3 5 4 7 6 8 ［ ETQP4M220KFN ］ 60 3 12 ［ ETQP4M100KFN ］ ［ ETQP4M150KFN ］ 2 10 DC Bias (A) 80 1 8 80 DC Bias (A) 0 6 DC Bias (A) 5 6 DC Bias (A) 80 60 40 20 0 0 1 2 3 4 5 DC Bias (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 47 31-Oct-23 Power Choke Coil (Automotive Grade) 2. PCC-M0748M-LE series (ETQP4M□□□KFM) Standard parts DCR (at 20 ℃) （ｍΩ） Inductance*1 Part No. L0 (μH) Tolerance Typ. (max.) (%) Rated current (A) Typ. Tolerance (%) (　)*3 –30 %*4 4.7 16.8 (18.48) 8.8 (6.5) 10.6 ETQP4M100KFM 10.0 36.0 (39.60) 6.0 (4.5) 9.5 ETQP4M150KFM 15.0 4.6 (3.4) 7.2 ETQP4M220KFM 22.0 3.9 (2.9) 5.2 ETQP4M330KFM 33.0 115.0 (126.5) 3.4 (2.5) 4.2 ETQP4M470KFM 47.0 148.6 (163.46) 2.9 (2.2) 3.7 60.7 (66.77) 84.1 (92.51) ±10 (G) MSL level *5 *6 4.4 1 △L= △T= 40 K*2 ETQP4M4R7KFM ±20 Vibration resistance Series [Size L×W×H] (mm) PCC-M0748M-LE [7.0×7.4×4.8] *1: Measured at 100 kHz *2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with high-heat dissipation (heat dissipation constant 7.4 x 7.0 x 4.8 mm : approx. 31 K/W). *3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of FR4 t=1.6 mm and DC current is applied. *4: Saturation rated current : DC current which causes L(0) drop –30 %. *5: Vibration resistance conditions : Amplitude: 5 mm or less, sweep speed: 1 oct / min, frequency 5-2000 Hz, 3 directions/2 hours each, total 6 hours *6: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used． ◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150°C should not be exceeded. Please contact for possible to use over 150 ℃ condition. Temperature up to 180 ℃ may possibly be used. Performance characteristics (Reference①) ● Inductance vs DC Current 12 5 Inductance (μH) Inductance (μH) ［ ETQP4M100KFM ］ ［ ETQP4M4R7KFM ］ 6 4 3 2 1 0 0 2 4 6 8 12 10 14 10 8 6 4 2 0 16 0 2 4 6 DC Bias (A) ［ ETQP4M150KFM ］ 12 8 4 0 0 4 2 8 6 10 DC Bias (A) 8 5 0 0 1 20 10 4 3 4 5 6 ［ ETQP4M470KFM ］ 40 30 20 10 0 3 2 DC Bias (A) Inductance (μH) Inductance (μH) 7 10 12 30 2 16 20 50 1 14 15 ［ ETQP4M330KFM ］ 0 12 25 40 0 10 ［ ETQP4M220KFM ］ 30 Inductance (μH) Inductance (μH) 16 8 DC Bias (A) 5 0 1 2 3 4 5 DC Bias (A) DC Bias (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 48 31-Oct-23 Power Choke Coil (Automotive Grade) Performance characteristics (Reference②) ● Case Temperature vs DC Current PWB condition A : Four-layer PWB (1.6 mm FR4).*3 PWB condition B : Multilayer PWB with high heat dissipation performance.*2 ［ ETQP4M4R7KFM ］ Temperature rise ΔT(K) Temperature rise ΔT(K) 80 60 40 20 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 ［ ETQP4M100KFM ］ 80 60 40 20 0 0 1 2 3 DC Bias (A) Temperature rise ΔT(K) Temperature rise ΔT(K) 8 9 20 0 1 2 3 5 4 6 7 60 40 20 0 0 1 ［ ETQP4M330KFM ］ Temperature rise ΔT(K) 40 20 2 3 5 6 ［ ETQP4M470KFM ］ 60 1 4 DC Bias (A) 80 0 3 2 DC Bias (A) Temperature rise ΔT(K) 7 ［ ETQP4M220KFM ］ 40 0 6 80 60 0 5 DC Bias (A) ［ ETQP4M150KFM ］ 80 4 4 5 80 60 40 20 0 0 1 2 3 4 5 DC Bias (A) DC Bias (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 49 31-Oct-23 Power Choke Coil (Automotive Grade) Dimensions in mm (not to scale) Dimensional tolerance unless noted : ±0.5 Series PCC-M0648M-LE Series PCC-M0748M-LE (ETQP4M□□□KFM) Suffix 7.0±0.4 1.6±0.4 1.6±0.4 Polarity 0.05 min. 4.8 max. Date Code 4.8 max. 6.0±0.4 1.6±0.4 1.6±0.4 Polarity 0.05 min. Date Code Suffix 2.0±0.2 Inductance 7.4±0.4 2.0±0.2 (ETQP4M□□□KFN) Inductance 6.4±0.4 Unit : mm Recommended land pattern in mm (not to scale) Dimensional tolerance unless noted : ±0.5 Series PCC-M0648M-LE Series PCC-M0748M-LE (ETQP4M□□□KFN) (ETQP4M□□□KFM) 2.2 7.0 2.2 8.0 8.4 7.4 3.0 2.0 7.4 8.4 ※Don't wire on the pattern on shaded portion the PWB. Unit : mm ■ As for soldering conditions and safety precautions (Power choke coils (Automotive grade)), please see data files Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 50 31-Oct-23 Power Choke Coil (Automotive Grade) Packaging methods (Taping) ● Embossed Carrier Tape Dimensions in mm (not to scale) B W F A t2 t1 E P0 P2 øD0 P1 Tape running direction Unit : mm P２ P０ øD0 t1 t2 Series A B W E F P1 PCC-M0648M-LE 6.6 7.1 16 1.75 7.5 12 2 4 1.5 0.4 5.0 PCC-M0748M-LE 7.6 8.1 16 1.75 7.5 12 2 4 1.5 0.4 6.0 A B C øD E W 330 (100) 13 21 2 17.5 ● Taping Reel Dimensions in mm (not to scale) E C B Unit : mm øD W Series PCC-M0648M-LE PCC-M0748M-LE A Terminal Parts mounting (Taping) Standard packing quantity / Reel Serise Part No. PCC-M0648M-LE ETQP4M□□□KFN PCC-M0748M-LE ETQP4M□□□KFM Minimum quantity / Packing unit Quantity per reel 1,000 pcs / box (2 reel) 500 pcs Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 51 31-Oct-23 Development product Power Inductors Power Choke Coil (Automotive Grade) PCC-M0750M-LL series High heat resistance and high reliability using metal composite core (MC) Features ● High efficiency : Low DC resistance of winding and low eddy-current loss of the core ● High heat resistance : Operation up to 155 ℃ including self-heating. (180 ℃ short time*) * Please contact for possible to use over 155 ℃ condition. Temperature up to 180 ℃ may possibly be used. ● Low profile : 5 ｍｍ max. height ● High-reliability : High vibration resistance as result of newly developed integral construction ; ● High bias current : Excellent inductance stability using ferrous alloy magnetic material ● Low audible (buzz) noise : A gapless structure achieved with metal composite core ● SMD type under severe reliability conditions of automotive and other strenuous applications ● Temp. stability : Excellent inductance stability over broad temp. range ● Shielded construction ● AEC-Q200 compliant ● RoHS compliant Recommended applications ● Boost-Converter, Buck-Converter DC / DC Standard packing quantity (Minimum quantity/Packing unit) ● 1,000 pcs / box (2 reel) Explanation of part numbers 1 2 3 4 5 6 7 8 9 10 11 12 E T Q P 5 M R 2 2 C V M Classification Height Winding Core Suffix Product code Inductance Code Inductance 0.22 μH R22 Size Code Size M □ 7 mm Temperature rating Operating temperature range Storage condition After PWB mounting Before PWB mounting Tc : -55 ℃ to +155 ℃ (Including self-temperature rise) Ta : -5 ℃ to +35 ℃ 85%RH max. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 52 31-Oct-23 Power Choke Coil (Automotive Grade) PCC-M0750M-LL series (ETQP5M□□□CVM) Standard parts DCR (at 20 ℃) （ｍΩ） Inductance*1 Part No. ▲ETQP5MR22CVM L0 (μH) Tolerance 0.22 ±20 (%) Rated current (A) Typ. Tolerance Typ. (max.) (%) 0.71 (0.78) ±10 Vibration resistance (G) MSL level (　)*3 –30 %*4 △L= *5 *6 44.0 (32.0) 63.7 5.0 1 △T= 40 K*2 *1: Measured at 100 kHz *2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with high-heat dissipation (heat dissipation constant : approx. 29 K/W). Series [Size L×W×H] (mm) PCC-M0750M-LL [7.0×7.9×5.0] ▲ Development product *3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of FR4 t=1.6 mm and DC current is applied. *4: Saturation rated current : DC current which causes L(0) drop –30 %. *5: Vibration resistance conditions : Amplitude: 5 mm or less, sweep speed: 1 oct / min, frequency 5-2000 Hz, 3 directions/4 hours each, total 12 hours *6: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used． ◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +155 ℃ should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area. Performance characteristics (Reference①) ● Inductance vs DC Current ［ ETQP5MR22CVM ］ Inductors (μH) 0.25 0.20 0.15 0.10 0.05 0 0 10 20 30 40 50 60 70 DC Bias (A) Performance characteristics (Reference②) ● Case Temperature vs DC Current PWB condition A : Four-layer PWB (1.6 mm FR4).*3 PWB condition B : Multilayer PWB with high heat dissipation performance.*2 ［ ETQP5MR22CVM ］ Temperature rise ΔT(K) 80 60 40 20 0 0 10 20 30 40 50 DC Bias (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 53 31-Oct-23 Power Choke Coil (Automotive Grade) Dimensions in mm (not to scale) Dimensional tolerance unless noted : ±0.5 PCC-M0750M-LL series (ETQP5M□□□CVM) 7.9±0.4 3.18±0.2 Suffix 7.0±0.4 Inductance ◎ 1.5±0.4 0.05min 1.5±0.4 5.00max Polarity Date code Unit : mm Recommended land pattern in mm (not to scale) Dimensional tolerance unless noted : ±0.5 PCC-M0750M-LL series 8.0 3.38 (ETQP5M□□□CVM) 3.0 8.4 ※Don't wire on the pattern on shaded portion the PWB. Unit : mm ■ As for soldering conditions and safety precautions (Power choke coils (Automotive grade)), please see data files Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 54 31-Oct-23 Power Choke Coil (Automotive Grade) Packaging methods (Taping) ● Embossed carrier tape dimensions in mm (not to scale) P0 t1 E P2 øD0 B W F A t2 P1 Tape running direction Unit : mm Series A B W E F P1 P２ P０ øD0 t1 t2 PCC-M0750M-LL 7.7 8.3 16 1.75 7.5 12 2 4 1.5 0.4 6.0 ● Taping reel dimensions in mm (not to scale) Unit : mm E A B C øD E W 330 (100) 13 21 2 17.5 B C Series PCC-M0750M-LL øD W A Parts mounting (Taping) Terminal PCC-M0750M-LL series Standard packing quantity / Reel Serise Part No. Minimum quantity / Packing unit Quantity per reel PCC-M0750M-LL ETQP5M□□□CVM 1,000 pcs / box (2 reel) 500 pcs Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 55 31-Oct-23 Power Inductors Power Choke Coil (Automotive Grade) PCC-M0530M-H series PCC-M0630M-H series High heat resistance and high reliability using metal composite core (MC) Features ● Reduce core loss in high frequency band (More than 2 MHz) ● High heat resistance : Operation up to 150 ℃ including self-heating ● Low profile : ３ｍｍ max. height ● SMD type : High vibration resistance as result of newly developed integral construction ; ● High-reliability under severe reliability conditions of automotive and other strenuous applications ● High bias current : Excellent inductance stability using ferrous alloy magnetic material ● Temp. stability : Excellent inductance stability over broad temp. range ● Low audible (buzz) noise : A gapless structure achieved with metal composite core ● High efficiency : Low DC resistance of winding and low eddy-current loss of the core ● Shielded construction ● AEC-Q200 compliant ● RoHS compliant Recommended applications ● Noise filter for various drive circuitry requiring high temp. operation and peak current handling capability ● Boost-Converter, Buck-Converter DC/DC Standard packing quantity (Minimum quantity/Packing unit) ● 2,000 pcs/box (2 reel) Explanation of part numbers 1 2 3 4 E T Q P Product code 5 Classification 6 7 8 9 M Height Inductance Winding 10 11 H F Core Suffix 12 Size (Example) Code Inductance Code Size 2R2 2.2 μH P □ 5 mm 100 10 μH N □ 6 mm Temperature rating Operating temperature range Storage condition After PWB mounting Before PWB mounting Tc : -40 ℃ to +150 ℃ (Including self-temperature rise) Ta : -5 ℃ to +35 ℃ 85%RH max. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 56 6-Aug-21 Power Choke Coil (Automotive Grade) PCC-M0530M-H / PCC-M0630M-H series (ETQP3M□□□HFP/ETQP3M□□□HFN) Standard parts DCR (at 20 ℃) （ｍΩ） Inductance*1 Part No. L0 (μH) ETQP3M2R2HFP 2.2 ETQP3M100HFN 10.0 Tolerance Tolerance (%) 19.5 (21.45) ±20 ±20 68.0 (74.8) 144.0 (158.4) 22.0 ETQP3M220HFN Typ. (max.) (%) MSL level Rated current (A) Typ. △T= 40 K*2 Series [Size L×W×H] (mm) △L= –30 %*4 *5 6.3 (5.2) 9.0 1 PCC-M0530M-H [5.0×5.5×3.0] 3.7 (3.0) 5.5 1 PCC-M0630M-H 2.5 (2.1) 4.0 1 [6.0×6.5×3.0] (　)*3 *1: Measured at 100 kHz *2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with high-heat dissipation (heat dissipation constant : approx. 20 K/W). *3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of FR4 t=1.6 mm and DC current is applied. *4: Saturation rated current : DC current which causes L(0) drop –30 %. *5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used． ◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150°C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area. Performance characteristics (Reference①) ● Inductance vs DC Current ［ ETQP3M100HFN ］ 12 2.0 10 Inductors (μH) Inductors (μH) ［ ETQP3M2R2HFP ］ 2.5 1.5 1.0 0.5 0 0 2 4 6 10 8 12 8 6 4 2 0 14 DC Bias (A) 0 1 2 3 4 5 6 7 8 9 DC Bias (A) ［ ETQP3M220HFN ］ 25 Inductors (μH) 20 15 10 5 0 0 1 2 3 4 5 6 7 8 DC Bias (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 57 6-Aug-21 Power Choke Coil (Automotive Grade) Performance characteristics (Reference②) ● Case Temperature vs DC Current PWB condition A : Four-layer PWB (1.6 mm FR4).*3 PWB condition B : Multilayer PWB with high heat dissipation performance.*2 ［ ETQP3M100HFN ］ Temperature rise ΔT(K) Temperature rise ΔT(K) ［ ETQP3M2R2HFP ］ 80 60 40 20 0 0 1 2 3 4 5 6 7 8 80 60 40 20 0 0 1 2 DC Bias (A) 3 4 5 6 DC Bias (A) Temperature rise ΔT(K) ETQP3M2208/208/208/20HFN 80 60 40 20 0 0 1 2 3 4 DC Bias (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 58 6-Aug-21 Power Choke Coil (Automotive Grade) Dimensions in mm (not to scale) Dimensional tolerance unless noted : ±0.5 Series PCC-M0530M-H Series PCC-M0630M-H (ETQP3M□□□HFP) (ETQP3M□□□HFN) Suffix Inductance 1.5 Polarity 0.05 min. 3.0 max. Date Code 3.0±0.3 6.0±0.4 3.0±0.3 5.0±0.4 1.2±0.4 1.2±0.4 Polarity 0.05 min. Date Code Suffix 6.5±0.4 5.5±0.4 1.5 3.0 max. Inductance Unit : mm Recommended land pattern in mm (not to scale) Dimensional tolerance unless noted : ±0.5 Series PCC-M0530M-H Series PCC-M0630M-H (ETQP3M□□□HFP) (ETQP3M□□□HFN) 3.6 6.0 3.6 7.0 7.1 6.1 2.2 2.8 7.2 8.8 ※Don't wire on the pattern on shaded portion the PWB. Unit : mm ■ As for soldering conditions and safety precautions (Power choke coils (Automotive grade)), please see data files Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 59 6-Aug-21 Power Choke Coil (Automotive Grade) Packaging methods (Taping) ● Embossed carrier tape dimensions in mm (not to scale) P0 t1 E P2 øD0 B W F A t2 P1 Tape running direction Unit : mm Series A B W E F P1 P２ P０ øD0 t1 t2 PCC-M0530M-H 5.6 6.1 16 1.75 7.5 12 2 4 1.5 0.4 3.3 PCC-M0630M-H 7.1 6.6 16 1.75 7.5 12 2 4 1.5 0.4 3.3 ● Taping reel dimensions in mm (not to scale) Unit : mm Series E PCC-M0530M-H C B PCC-M0630M-H A B C øD E W 330 (100) 13 21 2 17.5 øD W A Parts mounting (Taping) Series PCC-M0530M-H Terminal SeriesPCC-M0630M-H Standard packing quantity / Reel Serise Part No. PCC-M0530M-H ETQP3M□□□HFP PCC-M0630M-H ETQP3M□□□HFN Minimum quantity / Packing unit Quantity per reel 2,000 pcs / box（2 reel） 1,000 pcs Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 60 6-Aug-21 Power Inductors Power Choke Coil (Automotive Grade) PCC-D1413H (DUST) series Realize high heat resistance, low loss and high reliability with dust core (DUST) Industrial property：patents 5 (Pending) Features ●High heat resistance ●SMD and small package ●High-reliability : Operation up to 150 ℃ including self-heating : L 14.7×W 13.2×H 13.1 mm : High vibration resistance as result of newly developed integral construction ; under severe reliability conditions of automotive and other strenuous applications : Excellent inductance stability using ferrous alloy magnetic material : 5 Hz to 2 kHz/30 G : Achieve by Low loss Dust core and Edgewise coil with rectangular wire ●High bias current ●High Vibration proof ●High efficiency ●Shielded construction ●AEC-Q200 compliant ●RoHS compliant Recommended applications ● Driver circuits of fuel injection systems in automotive, driver circuits of diesel common rail injection, step-up power supplies for motor driver-circuits Standard packing quantity (Minimum quantity/Packing unit) ● 600 pcs /10 tray Explanation of part numbers 1 2 3 4 E T Q P Product Code Classification 5 6 7 8 9 H Height Winding 10 11 12 Suffix Size D Inductance Core Temperature rating Operating temperature range After PWB mounting Storage condition Before PWB mounting Tc : -40 ℃ to +150 ℃ (Including self-temperature rise) Ta : -5 ℃ to +35 ℃ 85%RH max. Standard parts Part No. ETQPDH240DTV Inductance*1 L0 at 0A (μH) L1 at 10A (μH) 36.0±30 % (24.0)*2 DCR at 20 ℃ (mΩ) 25.8 typ. ACR at 20 kHz (mΩ) 50.0 typ. Rated current*3 △T=40K (A) 6.9 *1: Measured at 100 kHz. *2: Reference Only. *3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. ◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150℃ should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 61 1-Feb-20 Power Choke Coil (Automotive Grade) Performance characteristics (Reference) ● Inductance vs DC Current ［ ETQPDH240DTV ］ ● Case Temperature vs DC Current ［ ETQPDH240DTV ］ 100 45 90 40 80 Temperature rise ΔT(K) 50 Inductors (μH) 35 30 25 20 15 10 60 50 40 30 20 10 5 0 70 0 2 4 6 10 8 12 14 16 18 20 0 0 1 2 3 4 5 6 7 8 9 DC Bias (A) DC Bias (A) Dimensions in mm (not to scale) Connection Dimensional tolerance unless noted : ±0.5 Suffix 10.53 P1 13.1 13.2±0.6 P2 P2 5.9 2.45 14.7 6.7 min. 12.6 2.45 Inductance 10.53 Date Code P1 ✽None polar character Unit : mm Recommended land pattern in mm (not to scale) Dimensional tolerance unless noted : ±0.5 1.9 Recommend Resist opening area 8.4 20.6 5 4.4 10.35 10.35 Recommend copper pad area ✽ Due to bigger part, Thermal Capacity is large and may occure PWB temperature differences during reflow process. Recommended land pattern (Heat absorb) should be designed with reflow mountablity. Unit : mm ■ As for soldering conditions and safety precautions (Power choke coils (Automotive grade)), please see data files Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 62 1-Feb-20 10 Power Choke Coil (Automotive Grade) Packaging methods (Tray) ● Blister tray (mm) 60 pcs B G A F D E C ● Blister tray dimention Unit : mm Part No. A ETQPDH240DTV 152 Ｂ 262 C D E F G 23 14.8 15.1 19 18 Parts mounting (Tray) Standard packing quantity / Tray Part No. Quantity ETQPDH240DTV 600 pcs / 10 Tray (60 pcs / 1 Tray) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 63 1-Feb-20 Power Inductors Temperature (℃) Reflow soldering conditions T3 T2 T1 t1 t2 0 Time ● Pb free solder recommended temperature profile Power Choke Coils (Automotive Grade) Series ETQP3M◻◻◻YFP ETQP4M◻◻◻YFP ETQP3M◻◻◻YFN ETQP4M◻◻◻YFN ETQP5M◻◻◻YFM ETQP5M◻◻◻YGM ETQP5M◻◻◻YFK ETQP5M◻◻◻YGK ETQP5M◻◻◻YFC ETQP5M◻◻◻YGC ETQP5M◻◻◻YLC ETQP6M◻◻◻YLC ETQP5M◻◻◻YSK ETQP5M◻◻◻YSC ETQP8M◻◻◻JFA ETQP3M◻◻◻KVP ETQP3M◻◻◻KVN ETQP4M◻◻◻KVK ETQP4M◻◻◻KVC ETQP4M◻◻◻KFN ETQP4M◻◻◻KFM ETQP3M◻◻◻HFP ETQP3M◻◻◻HFN ETQPDH◻◻◻DTV Preheat T1 [℃] t1 [s] 150 to 170 60 to 120 Soldering T2 [℃] t2 [s] 230℃ 30 to 40 Peak temperature T3 T3 limit 250℃, 5 s 260℃, 10 s 2 times max. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 64 Time of reflow 01-May-20 Matters to Be Observed When Using This Product / Reference Information Matters to Be Observed When Using This Product (Power inductor for consumer use) 　Use environments and cleaning conditions ■ This product (capacitor) is intended for standard general-purpose use in electronic equipment, and is not designed for use in the specific environments described below. Using the product in such specific environments or service conditions, therefore, may affect the performance of the product. Please check with us about the performance and reliability of the product first before using the product. (1) A product splashed with water, coffee, etc., is in a wet state. (2) Used in a place where the product is heavily exposed to sea breeze or a corrosive gas, such as Cl2, H2S, NH3, SO2, or NOX. (3) Used in an outdoor environment where the product is exposed to direct sunlight, ozone, radiation, UV-rays, etc., or in a dusty place. ■ Sealing the product with a resin may damage the copper wire insulation cover of the product. In such a case, consult us first. ■ Immersing the product in a solvent, cleaning agent, or coating agent containing toluene or xylene for a long period may result in a significant drop in the performance of the product. In such a case, consult us first. 　Response to anomalies and handling conditions ■ The inductor, as a single component, does not have a protective function against a problem such as overloading, short circuit, or open failure. Make sure to provide a circuit set with a protection device or circuit that protects the inductor, and confirm that smoke generation/ignition, weakened dielectric strength, lower insulation resistance, etc., do not occur. ■ The temperature rise rate of the inductor changes depending on the state in which the inductor is incorporated in the circuit set. Make sure to confirm that the temperature of the inductor is equal to or lower than the temperature corresponding to the specified insulation class (heat-resistant class) when the inductor is incorporated in the circuit set. ■ Applying voltage higher than the specified withstand voltage to the inductor at a dielectric strength test leads to the deterioration of the insulation performance of the inductor. Be careful to avoid this. ■ Handle the inductor while protecting it from static electricity with proper electrostatic control measures. (Process/equipment) Applying voltage equal to or higher than 200 V to the inductor may change its characteristics. Keep voltage applied to the inductor lower than 200 V. ■ The inductor having received mechanical stress as a result of dropping on the floor, etc., may have formed a crack on its bobbin, etc., and therefore the performance of the inductor may have dropped significantly. Avoid using such an inductor. ■ When severe mechanical stress is applied to an inductor, its core may chip or crack. There are also some cases where the core already has a chipped or cracked part. However, this chip or crack is negligible and has no effect on the quality of the inductor. ■ The storage temperature of an inductor ranges from -5 ℃ to 35 ℃, and the working temperature (ambient temperature) of an inductor ranges from -40 ℃ to 130 ℃ (which includes the temperature increase). * The highest working temperature of PCC-F126(N6) series is 100 ℃. 　Circuit design and circuit board design ■ When the inductor is used in a different product set among a series of similar product sets, there are times when the inductor will fail to achieve 100% of its capability because of the difference in service conditions, etc. In such a case, consult us first. ■ When there is a possibility that electrostatic noise is applied to circuit components, place an ESD preventing component, such as a capacitor resistant to static electricity, in a preceding stage to the inductor. In such a case, consult us first. Reference information 　Labeling on package On the inductor package, a product number, the number of components, and the place of origin are indicated. Usually, the place of origin is written in English. 30-Jun-23 65 Power Inductors Power Choke Coil PCC-M0730L (MC) series Small mounting size for multi-phase DC/DC converter circuits Industrial property : Patents 18 (Registered 15 / Pending 3) Features ●Small type (8.7×7.0×H3.0 mm) ●High power (22 A) ●Low loss (DCR : 1.12 mΩ) ●Tighter DCR tolerance (±7 ％) ●Suitable for high frequency circuit (up to 1 MHz） ●Low buzz noise due to its gap-less structure ●Shielded construction ●RoHS compliant Recommended applications ●Notebook and Desktop PC power supply modules ●Servers, Routers, DC/DC converters for driving CPUs Standard packing quantity (Minimum quantity/Packing unit) ●3,000 pcs/box（2 reel） Explanation of part numbers 1 2 3 4 5 6 E T Q P 3 L Classification Size Winding Product code 7 8 9 Inductance 10 11 12 Core Packaging Suffix Standard parts Part No. Inductance (at 20℃)*1 L0 at 0A L1*4 Rated current (A)*2 Rated current DC resistance (reference) (at 20℃) (A)*3 (mΩ) max. (μH) (μH) Measurement current ETQP3LR15CFM 0.15±20 % (0.12) 29 29 43 0.66±7 % ETQP3LR24CFM 0.24±20 % (0.19) 22 22 35 1.12±7 % (A) *1: Inductance is measured at 1.0 MHz. *2: Rated current defines actual value of DC current, when temperature rise of coil becomes 40 K. (Method A) *3: Rated current (reference) defines actual value of DC current, when temperature rise of coil becomes 40 K. (Method B) *4: Reference only ◆ Method A (PANASONIC's standard measurement conditions), Method B (high heat dissipation measurement) is different from Method A by the measurement methods. In normal application condition, the part's temperature depends on circuit design and heat dissipation condition. This condition shall be verified by the worst operational condition. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 66 18-Sep-20 Power Choke Coil Performance characteristics (Reference) Inductance vs DC Current Case Temperature vs DC Current（Method A） ETQP3LR24CFM ETQP3LR15CFM (uH) ETQP3LR24CFM ETQP3LR15CFM 0.30 100 0.25 80 Temp. rise (K) 0.20 0.15 0.10 40 20 0.05 0.00 60 0 5 10 15 20 25 30 35 0 40 0 5 10 15 (A) 20 25 30 35 Idc (A) Dimensions in mm (not to scale) 8.7 max. 2.0±0.3 7.0±0.3 0.01 min. P1 P2 2.0 3.0 max. Unit : mm Connection Recommended land patterns in mm (not to scale) 2.6 P2 P1 2.8 3.6 2.8 Unit : mm ■ As for soldering conditions and safety precautions (Power choke coils for consumer use), please see data files. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 67 18-Sep-20 Power Inductors Power Choke Coil (Low DCR type) PCC-M0740L (MC) series Small mounting size for multi-phase DC/DC converter circuits Industrial property : Patents 2 (Pending) Features ●Small type (8.7×7.0×H4.0 mm) ●High power (17 A to 24 A) ●Low loss (DCR : 1.0 to 1.5 mΩ) ●Tighter DCR tolerance (±7 ％) ●Suitable for high frequency circuit (up to 1 MHz) ●Low buzz noise due to its gap-less structure ●Shielded construction ●RoHS compliant Recommended applications ●Notebook and Desktop PC power supply modules ●Servers, Routers, DC/DC converters for driving CPUs Standard packing quantity (Minimum quantity/Packing unit) ●3,000 pcs/box (2 reel) Explanation of part numbers 1 2 3 4 5 6 E T Q P 4 L Classification Size Winding Product code 7 8 9 Inductance 10 11 12 Core Packaging Suffix Standard parts Inductance (at 20℃)*1 Part No. L1*4 L0 at 0A Rated current (A)*2 Rated current DC resistance (reference) (at 20℃) (A)*3 (mΩ) max. (μH) (μH) Measurement current ETQP4LR15AFM 0.15±20 % (0.13) 29 29 43.0 0.66±7 % ETQP4LR24AFM 0.24±20 % (0.20) 24 24 35.5 1.00±7 % ETQP4LR36AFM 0.36±20 % (0.30) 20 20 31.0 1.35±7 % ETQP4LR42AFM 0.42±20 % (0.35) 17 17 28.5 1.50±7 % (A) *1: Inductance is measured at 1.0 MHz. *2: Rated current defines actual value of DC current, when temperature rise of coil becomes 40 K. (Method A) *3: Rated current (reference) defines actual value of DC current, when temperature rise of coil becomes 40 K. (Method B) *4: Reference only ◆ Method A (PANASONIC's standard measurement conditions), Method B (high heat dissipation measurement) is different from Method A by the measurement methods. In normal application condition, the part's temperature depends on circuit design and heat dissipation condition. This condition shall be verified by the worst operational condition. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 68 18-Sep-20 Power Choke Coil (Low DCR type) Performance characteristics (Reference) Inductance vs DC Current Case Temperature vs DC Current（Method A） ETQP4LR42AFM ETQP4LR42AFM (uH) ETQP4LR36AFM ETQP4LR36AFM ETQP4LR24AFM ETQP4LR24AFM ETQP4LR15AFM ETQP4LR15AFM 100 0.45 90 0.40 80 0.35 70 Temp. rise (K) 0.30 0.25 0.20 0.15 60 50 40 30 0.10 20 0.05 10 0.00 0 5 10 15 20 25 0 30 0 5 10 15 (A) 20 25 30 Idc (A) Dimensions in mm (not to scale) 0.01 min. Unit : mm A 7.0±0.3 8.7 max. Part No. ETQP4LR15AFM P1 4.0 max. Connection ETQP4LR24AFM P2 ETQP4LR36AFM 2.0 ETQP4LR42AFM A 3.0±0.3 2.0±0.3 Recommended land patterns in mm (not to scale) P2 B Unit : mm Part No. ETQP4LR15AFM ETQP4LR24AFM ETQP4LR36AFM P1 2.8 3.6 2.8 ETQP4LR42AFM B 3.6 2.6 ■ As for soldering conditions and safety precautions (Power choke coils for consumer use), please see data files. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 69 18-Sep-20 Power Inductors Power Choke Coil PCC-M1040L (MC) series Small mounting size for multi-phase DC/DC converter circuits Industrial property : Patents 4 (Pending) Features ●Small type (11.5×10.0×H4.0 mm) ●High power (21 A to 28 A) ●Low loss (DCR : 0.7 to 1.56 mΩ) ●Tighter DCR tolerance (±5 ％ to ±10 ％) ●Suitable for high frequency circuit (up to 1 MHz) ●Low buzz noise due to its gap-less structure ●Shielded construction ●RoHS compliant Recommended applications ●Notebook and Desktop PC power supply modules ●Servers, Routers, DC/DC converters for driving CPUs Standard packing quantity (Minimum quantity/Packing unit) ●2,000 pcs/box(2 reel): ETQP4LR36WFC, ETQP4LR56WFC, ETQP4LR45XFC ●1,000 pcs/box(2 reel): ETQP4LR19WFC Explanation of part numbers 1 2 3 4 5 6 E T Q P 4 L Classification Size Winding Product code 7 8 9 Inductance 10 11 12 Core Packaging Suffix Standard parts Inductance (at 20℃)*1 Part No. L2*4 L1 L0 at 0A Rated current Measurement (A)*2 Rated current (reference) (A)*3 DC resistance (at 20℃) (mΩ) (μH) (μH) Measurement current (A) (μH) ETQP4LR19WFC (0.2) 0.19±20 % 21 (0.17) 30 28 38 0.70±10 % ETQP4LR36WFC (0.37) 0.36±20 % 17 (0.34) 24 24 33 1.10±　5 % ETQP4LR56WFC (0.6) 0.56±20 % 15 (0.53) 21 21 28 1.56±　5 % ETQP4LR45XFC +20 % 0.45 −25 % — — (0.38) 25 25 33 1.10±　5 % current (A) *1: Inductance is measured at 1.0 MHz. *2: Rated current defines actual value of DC current, when temperature rise of coil becomes 40 K. (Method A) *3: Rated current (reference) defines actual value of DC current, when temperature rise of coil becomes 40 K. (Method B) *4: Reference only ◆ Method A (PANASONIC's standard measurement conditions), Method B (high heat dissipation measurement) is different from Method A by the measurement methods. In normal application condition, the part's temperature depends on circuit design and heat dissipation condition. This condition shall be verified by the worst operational condition. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 70 15-Sep-20 Power Choke Coil Performance characteristics (Reference) Inductance vs DC Current Case Temperature vs DC Current（Method A） ETQP4LR56WFC ETQP4LR36WFC ETQP4LR19WFC ETQP4LR45XFC (uH) 0.8 ETQP4LR56WFC ETQP4LR36WFC / ETQP4LR45XFC ETQP4LR19WFC 100 90 0.7 80 Temp. rise (K) 0.6 0.5 0.4 0.3 0.2 60 50 40 30 20 0.1 0.0 70 10 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 0 30 0 5 10 15 (A) 20 25 30 Idc (A) Dimensions in mm (not to scale) 11.5 max. 10.0±0.3 4.0±0.2 0.01 min. P2 P1 2.5 4.0 max. Connection Unit : mm Recommended land patterns in mm (not to scale) 4.6 P2 P1 3.8 6.0 3.8 Unit : mm ■ As for soldering conditions and safety precautions (Power choke coils for consumer use), please see data files. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 71 15-Sep-20 Power Inductors Power Choke Coil (Low DCR type) PCC-M1040L (MC) series Small mounting size for multi-phase DC/DC converter circuits Industrial property : Patents 2 (Pending) Features ●Small type (11.7×10.0×H4.0 mm) ●High power (21 A to 30 A) ●Low loss (DCR : 0.76 to 1.58 mΩ) ●Tighter DCR tolerance (±5 ％, ±7 ％) ●Suitable for high frequency circuit (up to 1 MHz） ●Low buzz noise due to its gap-less structure ●Shielded construction ●RoHS compliant Recommended applications ●Notebook and Desktop PC power supply modules ●Servers, Routers, DC/DC converters for driving CPUs Standard packing quantity (Minimum quantity/Packing unit) ●2,000 pcs/box（2 reel） Explanation of part numbers 1 2 3 4 5 6 E T Q P 4 L Classification Size Winding Product code 7 8 9 Inductance 10 11 12 Core Packaging Suffix Standard parts Part No. Inductance (at 20℃)*1 L0 at 0A L1*4 Rated current (A)*2 Rated current DC resistance (reference) (at 20℃) (A)*3 (mΩ) max. (μH) (μH) Measurement current ETQP4LR15AFC 0.15±20 % (0.13) 42 42 51 0.45±7 % ETQP4LR36AFC 0.36±20 % (0.29) 30 30 40 0.76±5 % ETQP4LR68XFC 0.68±20 % (0.59) 21 21 28 1.58±5 % (A) *1: Inductance is measured at 1.0 MHz. *2: Rated current defines actual value of DC current, when temperature rise of coil becomes 40 K. (Method A) *3: Rated current (reference) defines actual value of DC current, when temperature rise of coil becomes 40 K. (Method B) *4: Reference only ◆ Method A (PANASONIC's standard measurement conditions), Method B (high heat dissipation measurement) is different from Method A by the measurement methods. In normal application condition, the part's temperature depends on circuit design and heat dissipation condition. This condition shall be verified by the worst operational condition. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 72 18-Sep-20 Power Choke Coil (Low DCR type) Performance characteristics (Reference) Inductance vs DC Current Case Temperature vs DC Current（Method A） ETQP4LR68XFC ETQP4LR36AFC ETQP4LR15AFC ETQP4LR68XFC ETQP4LR36AFC ETQP4LR15AFC (uH) 0.80 140 0.70 120 0.60 100 Temp. rise (K) 0.50 0.40 0.30 0.20 80 60 40 20 0.10 0.00 0 0 5 10 15 20 25 (A) 30 35 40 45 50 0 5 10 15 20 25 30 35 40 45 Idc (A) Dimensions in mm (not to scale) 11.7 max. 10.0±0.3 4.0±0.3 0.01 min. P1 P2 4.0 max. 2.5 Unit : mm Connection Recommended land patterns in mm (not to scale) 4.6 P2 P1 3.8 6.0 3.8 Unit : mm ■ As for soldering conditions and safety precautions (Power choke coils for consumer use), please see data files. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 73 18-Sep-20 50 This series is not a recommended product. Not recommended for new design. Power Inductors Power Choke Coil PCC-M1250L (MC) series High power, Low loss, Low-profile Industrial property : Patents 2 (Pending) Features ●High power (25 A to 30 A) ●Low loss (DCR : 0.8 to 1.1 mΩ) ●Tighter DCR tolerance (±5 ％ to ±7 ％) ●Low profile (14.5×12.5×H5.0 mm) ●Suitable for high frequency circuit (up to 1 MHz） ●Low buzz noise due to its gap-less structure ●Shielded construction ●RoHS compliant Recommended applications ●Notebook and Desktop PC power supply modules ●Servers, Routers, DC/DC converters for driving CPUs Standard packing quantity (Minimum quantity/Packing unit) ●1,000 pcs/box (2 reel) Explanation of part numbers 1 2 3 4 5 6 E T Q P 5 L Classification Size Winding Product code 7 8 9 Inductance 10 11 12 Core Packaging Suffix Standard parts Inductance (at 20℃)*1 L1 Part No. Rated current (A)*2 DC resistance (at 20℃) (mΩ) 42 30 0.80±7 % 42 27 1.10±5 % L2*3 (μH) Measurement current (μH) Measurement current ETQP5LR50XFA 0.50±20 % 30 (0.46) ETQP5LR60XFA 0.60±20 % 30 (0.54) (A) (A) *1: Inductance is measured at 1.0 MHz. *2: Rated current defines actual value of DC current, when temperature rise of coil becomes 40 K. *3: Reference only Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 74 21-Apr-23 Power Choke Coil Performance characteristics (Reference) Inductance vs DC Current Case Temperature vs DC Current ETQP5LR50XFA ETQP5LR60XFA ETQP5LR60XFA ETQP5LR50XFA 1.0 100 0.9 90 0.8 80 Temp. rise (K) 0.7 (uH) 0.6 0.5 0.4 0.3 60 50 40 30 0.2 20 0.1 0.0 70 10 0 5 10 15 20 25 30 35 40 (A) 0 0 5 10 15 20 25 30 35 40 Idc (A) Dimensions in mm (not to scale) 14.5 max. 12.5±0.3 4.0±0.2 0.01 min. P2 P1 (2.5) 5.0 max. Unit : mm Connection Recommended land patterns in mm (not to scale) 4.6 P2 P1 3.8 8.7 3.8 Unit : mm ■ As for soldering conditions and safety precautions (Power choke coils for consumer use), please see data files. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 75 21-Apr-23 45 Power Choke Coil Temperature (°C) Reflow soldering conditions T3 T2 T1 t1 t2 0 Time ● Pb free solder recommended temperature profile Power Choke Coils for Consumer use Series T1 [℃] Preheat t1 [s] Soldering t2 [s] T2 [℃] Peak temperature T3 T3 Limit Time of reflow PCC-M0730L PCC-M0740L PCC-M1040L 150 to 170 60 to 120 230 °C 30 to 40 250 °C, 5 s 260 °C, 10 s 2 times max. PCC-M1250L Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 76 1-Apr-20 Power Choke Coil Packaging methods (Taping) ● Embossed carrier tape dimensions in mm (not to scale) P2 P0 t2 E t1 W B F A P1 Tape running direction Unit : mm Series A B W E F P1 P２ P０ øD0 t1 t2 PCC-M0730L 7.6 8.9 16 1.75 7.5 12 2 4 1.5 0.4 4.2 PCC-M0740L 7.6 8.9 16 1.75 7.5 12 2 4 1.5 0.4 4.3 PCC-M1040L 10.6 11.8 24 1.75 11.5 16 2 4 1.5 0.4 5.2 PCC-M1250L 13.1 14.8 24 1.75 11.5 16 2 4 1.5 0.4 5.3 A B C D E 380 80 13 21 2 ● Taping reel dimensions in mm (not to scale) Unit : mm Series PCC-M0730L PCC-M0740L PCC-M1040L PCC-M1250L E B C D W 17.5 25.4 W A Component placement (Taping) Standard packing quantity/Reel Serise Part No. PCC-M0730L ETQP3L□□□CFM PCC-M0740L ETQP4L□□□AFM Minimum quantity / Packing unit Quantity per reel 3,000 pcs / box (2 reel) 1,500 pcs 2,000 pcs / box (2 reel) 1,000 pcs 1,000 pcs / box (2 reel) 500 pcs ETQP4L□□□WFC PCC-M1040L ETQP4L□□□XFC PCC-M1040L ETQP4L□□□AFC ETQP4LR19WFC PCC-M1250L ETQP5L□□□XFA Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 77 1-Apr-20 Safty Precautions When using our products, no matter what sort of equipment they might be used for, be sure to confirm the applications and environmental conditions with our specifications in advance. Device Solutions Business Division 1006 Kadoma, Kadoma City, Osaka 571-8506 Japan © Panasonic Industry Unauthorized duplication of this catalog is strictly forbidden. The contents of catalog are as of October 2023.