Power Inductors
Power Choke Coil (Automotive Grade)
PCC-M0530M-H series
PCC-M0630M-H series
High heat resistance and high reliability using metal composite core (MC)
Features
● Reduce core loss in high frequency band (More than 2 MHz)
● High heat resistance
: Operation up to 150 ℃ including self-heating
● Low profile
: 3mm max. height
● SMD type
: High vibration resistance as result of newly developed integral construction ;
● High-reliability
under severe reliability conditions of automotive and other strenuous
applications
● High bias current
: Excellent inductance stability using ferrous alloy magnetic material
● Temp. stability
: Excellent inductance stability over broad temp. range
● Low audible (buzz) noise
: A gapless structure achieved with metal composite core
● High efficiency
: Low DC resistance of winding and low eddy-current loss of the core
● Shielded construction
● AEC-Q200 compliant
● RoHS compliant
Recommended applications
● Noise filter for various drive circuitry requiring high temp. operation and peak current handling capability
● Boost-Converter, Buck-Converter DC/DC
Standard packing quantity (Minimum quantity/Packing unit)
● 2,000 pcs/box (2 reel)
Explanation of part numbers
1
2
3
4
E
T
Q
P
Product code
5
Classification
6
7
8
9
M
Height
Inductance
Winding
10
11
H
F
Core
Suffix
12
Size
(Example)
Code
Inductance
Code
Size
2R2
2.2 μH
P
□ 5 mm
100
10 μH
N
□ 6 mm
Temperature rating
Operating temperature range
Storage condition
After PWB mounting
Before PWB mounting
Tc : -40 ℃ to +150 ℃ (Including self-temperature rise)
Ta : -5 ℃ to +35 ℃ 85%RH max.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
6-Aug-21
Power Choke Coil (Automotive Grade)
PCC-M0530M-H / PCC-M0630M-H series (ETQP3M□□□HFP/ETQP3M□□□HFN)
Standard parts
DCR (at 20 ℃)
(mΩ)
Inductance*1
Part No.
L0
(μH)
ETQP3M2R2HFP
2.2
ETQP3M100HFN
10.0
Tolerance
Tolerance
(%)
19.5 (21.45)
±20
±20
68.0 (74.8)
144.0 (158.4)
22.0
ETQP3M220HFN
Typ. (max.)
(%)
Rated current (A) Typ.
△T= 40 K*2
MSL
Series
[Size L×W×H]
(mm)
△L= –30 %*4
*5
6.3 (5.2)
9.0
1
PCC-M0530M-H
[5.0×5.5×3.0]
3.7 (3.0)
5.5
1
PCC-M0630M-H
2.5 (2.1)
4.0
1
[6.0×6.5×3.0]
( )*3
*1: Measured at 100 kHz
*2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with
high-heat dissipation (heat dissipation constant : approx. 20 K/W).
*3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of
FR4 t=1.6 mm and DC current is applied.
*4: Saturation rated current : DC current which causes L(0) drop –30 %.
*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.
◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This
should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150°C
should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance characteristics (Reference①)
● Inductance vs DC Current
12
10
2.0
Inductors (μH)
Inductors (μH)
[ ETQP3M100HFN ]
[ ETQP3M2R2HFP ]
2.5
1.5
1.0
0.5
0
0
2
4
6
10
8
12
14
DC Bias (A)
8
6
4
2
0
0
1
2
3
4
5
6
7
8
9
DC Bias (A)
[ ETQP3M220HFN ]
25
Inductors (μH)
20
15
10
5
0
0
1
2
3
4
5
6
7
8
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
6-Aug-21
Power Choke Coil (Automotive Grade)
Performance characteristics (Reference②)
● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4).*3
PWB condition B : Multilayer PWB with high heat dissipation performance.*2
[ ETQP3M100HFN ]
Temperature rise ΔT(K)
Temperature rise ΔT(K)
[ ETQP3M2R2HFP ]
80
60
40
20
0
0
1
2
3
4
5
6
7
8
80
60
40
20
0
0
1
2
DC Bias (A)
3
4
5
6
DC Bias (A)
Temperature rise ΔT(K)
ETQP3M2208/208/208/20HFN
80
60
40
20
0
0
1
2
3
4
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
6-Aug-21
Power Choke Coil (Automotive Grade)
Dimensions in mm (not to scale)
Dimensional tolerance unless noted : ±0.5
Series PCC-M0530M-H
Series PCC-M0630M-H
(ETQP3M□□□HFP)
(ETQP3M□□□HFN)
Suffix
Inductance
1.5
Polarity
0.05 min.
3.0 max.
Date Code
3.0±0.3
6.0±0.4
3.0±0.3
5.0±0.4
1.2±0.4
1.2±0.4
Polarity
0.05 min.
Date Code
Suffix
6.5±0.4
5.5±0.4
1.5
3.0 max.
Inductance
Unit : mm
Recommended land pattern in mm (not to scale)
Dimensional tolerance unless noted : ±0.5
Series PCC-M0530M-H
Series PCC-M0630M-H
(ETQP3M□□□HFP)
(ETQP3M□□□HFN)
3.6
6.0
3.6
7.0
7.1
6.1
2.2
7.2
2.8
8.8
※Don't wire on the pattern on shaded portion the PWB.
Unit : mm
■ As for soldering conditions and safety precautions (Power choke coils (Automotive grade)),
please see data files
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
6-Aug-21
Power Choke Coil (Automotive Grade)
Packaging methods (Taping)
● Embossed carrier tape dimensions in mm (not to scale)
P0
t1
E
P2
øD0
B
W
F
A
t2
P1
Tape running direction
Unit : mm
Series
A
B
W
E
F
P1
PCC-M0530M-H
5.6
6.1
16
1.75
7.5
12
PCC-M0630M-H
7.1
6.6
16
1.75
7.5
12
P2
P0
øD0
t1
t2
4
1.5
0.4
3.3
2
4
1.5
0.4
3.3
2
● Taping reel dimensions in mm (not to scale)
Unit : mm
Series
E
PCC-M0530M-H
C
B
PCC-M0630M-H
A
B
C
øD
E
W
330
(100)
13
21
2
17.5
øD
W
A
Parts mounting (Taping)
SeriesPCC-M0630M-H
Terminal
Series PCC-M0530M-H
Standard packing quantity / Reel
Serise
Part No.
PCC-M0530M-H
ETQP3M□□□HFP
PCC-M0630M-H
ETQP3M□□□HFN
Minimum quantity / Packing unit
Quantity per reel
2,000 pcs / box(2 reel)
1,000 pcs
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
6-Aug-21
Safety and Legal Matters to Be Observed
Safety and Legal Matters to Be Observed
Product specifications and applications
■ Please be advised that this product and product specifications are subject to change without notice for
improvement purposes. Therefore, please request and confirm the latest delivery specifications that explain
the specifications in detail before the final design, or purchase or use of the product, regardless of the
application. In addition, do not use this product in any way that deviates from the contents of the company's
delivery specifications.
■ Unless otherwise specified in this catalog or the product specifications, this product is intended for use in
general electronic equipment (AV products, home appliances, commercial equipment, office equipment,
information and communication equipment, etc.).
When this product is used for the following special cases, the specification document suited to each application
shall be signed/sealed (with Panasonic Industry and the user) in advance..These include applications requiring
special quality and reliability, wherein their failures or malfunctions may directly threaten human life or cause harm
to the human body (e.g.: space/aircraft equipment, transportation/traffic equipment, combustion equipment,
medical equipment, disaster prevention/crime prevention equipment, safety equipment, etc.).
Safety design and product evaluation
■ Please ensure safety through protection circuits, redundant circuits, etc., in the customer's system design so
that a defect in our company's product will not endanger human life or cause other serious damage.
■ This catalog shows the quality and performance of individual parts. The durability of parts varies depending on
the usage environment and conditions. Therefore, please ensure to evaluate and confirm the state of each part
after it has been mounted in your product in the actual operating environment before use.
If you have any doubts about the safety of this product, then please notify us immediately, and be sure to conduct
a technical review including the above protection circuits and redundant circuits at your company.
Laws / Regulations / Intellectual property
■ The transportation of dangerous goods as designated by UN numbers, UN classifications, etc., does not apply
to this product. In addition, when exporting products, product specifications, and technical information described
in this catalog, please comply with the laws and regulations of the countries to which the products are exported,
especially those concerning security export control.
■ Each model of this product complies with the RoHS Directive (Restriction of the use of hazardous substances in
electrical and electronic equipment) (2011/65/EU and (EU) 2015/863). The date of compliance with the RoHS
Directive and REACH Regulation varies depending on the product model.
Further, if you are using product models in stock and are not sure whether or not they comply with the RoHS
Directive or REACH Regulation, please contact us by selecting "Sales Inquiry" from the inquiry form.
■ During the manufacturing process of this product and any of its components and materials to be used,
Panasonic Industry does not intentionally use ozone-depleting substances stipulated in the Montreal Protocol
and specific bromine-based flame retardants such as PBBs (Poly-Brominated Biphenyls) / PBDEs
(Poly-Brominated Diphenyl Ethers). In addition, the materials used in this product are all listed as existing
chemical substances based on the Act on the Regulation of Manufacture and Evaluation of Chemical Substances.
■ With regard to the disposal of this product, please confirm the disposal method in each country and region
where it is incorporated into your company's product and used.
■ The technical information contained in this catalog is intended to show only typical operation and application
circuit examples of this product. This catalog does not guarantee that such information does not infringe upon
the intellectual property rights of Panasonic Industry or any third party, nor imply that the license of such rights
has been granted.
■ Design, materials, or process related to technical owned by Panasonic Industry are subject to change without
notice.
Panasonic Industry will assume no liability whatsoever if the use of our company's
products deviates from the contents of this catalog or does not comply with the
precautions. Please be advised of these restrictions.
10-May-24
Matters to Be Observed When Using This Product
Matters to Be Observed When Using This Product
(Power inductor for Automotive)
Use environments and cleaning conditions
■ This product (inductor) is intended for standard general-purpose use in electronic equipment, and is not designed for
use in the specific environments described below. Using the product in such specific environments or service conditions,
therefore, may affect the performance of the product.
Please check with us about the performance and reliability of the product first before using the product.
(1) A product splashed with water, coffee, etc., is in a wet state.
(2) Used in a place where the product is heavily exposed to sea breeze or a corrosive gas, such as Cl2, H2S, NH3, SO2,
or NOX.
(3) Used in an outdoor environment where the product is exposed to direct sunlight, ozone, radiation, UV-rays, etc.,
or in a dusty place.
■ Sealing the product with a resin may damage the copper wire insulation cover of the product. In such a case, consult
us first.
■ Immersing the product in a solvent, cleaning agent, or coating agent containing toluene or xylene for a long period
may result in a significant drop in the performance of the product. In such a case, consult us first.
Response to anomalies and handling conditions
■ The inductor, as a single component, does not have a protective function against a problem such as overloading,
short circuit, or open failure. Make sure to provide a circuit set with a protection device or circuit that protects the inductor,
and confirm that smoke generation/ignition, weakened dielectric strength, lower insulation resistance, etc., do not occur.
■ The temperature rise rate of the inductor changes depending on the state in which the inductor is incorporated in the
circuit set. Make sure to confirm that the temperature of the inductor is equal to or lower than the temperature
corresponding to the specified insulation class (heat-resistant class) when the inductor is incorporated in the circuit set.
■ Applying voltage higher than the specified withstand voltage to the inductor at a dielectric strength test leads to the
deterioration of the insulation performance of the inductor. Be careful to avoid this.
■ Handle the inductor while protecting it from static electricity with proper electrostatic control measures.
(Process/equipment) Applying voltage equal to or higher than 200 V to the inductor may change its characteristics.
Keep voltage applied to the inductor lower than 200 V.
■ The inductor having received mechanical stress as a result of dropping on the floor, etc., may have formed a crack on
its core, etc., and therefore the performance of the inductor may have dropped significantly. Avoid using such an
inductor.
■ When severe mechanical stress is applied to an inductor, its core may chip or crack.
There are also some cases where the core already has a chipped or cracked part. However, this chip or crack is
negligible and has no effect on the quality of the inductor.
Reliability and product life
A product conforming to "AEC-Q200" refers to a product having passed some or all of the evaluation test items defined
in AEC-Q200. To know the detailed specifications of individual products or specific evaluation test scores, please contact us.
We issue a delivery specification sheet for each product ordered. Please confirm with the sheet when you place an order
with us.
10-May-24
Matters to Be Observed When Using This Product / Reference Information
Circuit design and circuit board design
■ When the inductor is used in a different product set among a series of similar product sets, there are times when the
inductor will fail to achieve 100% of its capability because of the difference in service conditions, etc. In such a case,
consult us first.
■ When the inductor is used in an audible frequency range (= about 20 Hz to 20 kHz) or burst mode, it may emit a sound
(beat) under certain operation conditions (current waveform conditions). This sound may be heard as noise, depending
on circuits/board configurations in which the inductor is incorporated. Check for this problem before using the inductor.
■ When there is a possibility that electrostatic noise is applied to circuit components, place an ESD preventing component,
such as a capacitor resistant to static electricity, in a preceding stage to the inductor. In such a case, consult us first.
■ To ensure insulation between the internal coil of the inductor and the upper surface of the board, avoid forming patterns
or vias in which voltage exceeding the guaranteed operating voltage is applied, on the uppermost layer of the board in
counter to the inductor bottom. (DUST series)
■ Do not form a pattern, via, etc., on the counter to the bottom of the inductor. (MC series/* Fig.1, Dust type/*Fig.2)
■ Keep a component placed around the inductor from being in contact with the surface (top face, side face) of the inductor.
(MC series/* Fig. 3)
■ Different from a ferrite core type with a magnetic energy concentration gap, the inductor described herein has a vertical
leakage flux distribution.
Exercise special caution when using a component or a circuit configuration susceptible to leakage flux from an inductor.
Counter to the bottom part
Counter to the bottom part
1.9
8.4
Top face
Side face
4.4
8.4
20.6
8
3.8
5
Counter to the
bottom part
(PWB)
2.8
Side face
10
10.35
10.35
Fig.1
Fig.2
Fig.3
Reference information
Labeling on package
On the inductor package, a product number, the number of components, and the place of origin are indicated. Usually,
the place of origin is written in English.
10-May-24