Power Inductors
Power Choke Coil (Automotive Grade)
Series : PCC-M0648M-LE
PCC-M0748M-LE
High heat resistance and high reliability using metal composite core (MC)
Industrial Property : patents 3 (Registered 2/Pending 1)
Features
●Low loss (Low DC resistance)
●High heat resistance
: Operation up to 150 °C including self-heating
●SMD type
●High-reliability
: High vibration resistance as result of newly developed integral construction ;
under severe reliability conditions of automotive and other strenuous
applications
●High bias current
: Excellent inductance stability using ferrous alloy magnetic material
●Temp. stability
: Excellent inductance stability over broad temp. range
●Low audible (buzz) noise : A gapless structure achieved with metal composite core
●High efficiency
: Low DC resistance of winding and low eddy-current loss of the core
●Shielded construction
●AEC-Q200 compliant
●RoHS compliant
Recommended Applications
●Noise filter for various drive circuitry requiring high temp. operation and peak current handling capability
●Boost-Converter, Buck-Converter DC/DC
Standard Packing Quantity (Minimum Quantity/Packing Unit)
● 1,000 pcs/box (2 reel)
Explanation of Part Numbers
1
2
3
4
E
T
Q
P
Product Code
Classification
5
6
7
8
9
M
Height
Winding
Inductance
4R7
220
→
→
10
11
K
F
Core
Suffix
4.7 μH
22 μH
12
Size
Code
N
M
Size
□ 6 mm
□ 7 mm
Temperature rating
Operating temperature range
After PWB mounting
Storage condition
Before PWB mounting
Tc : -40 ℃ to +150 ℃ (Including self-temperature rise)
Ta : -5 ℃ to +35 ℃ 85%RH max.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Feb. 2020
Power Inductors
1. Series PCC-M0648M-LE (ETQP4M□□□KFN)
Standard Parts
Inductance
Part No.
L0
(μH)
DCR (at 20 ℃)
(mΩ)
*1
Tolerance
Typ. (max.)
(%)
Tolerance
(%)
MSL
Level
△L=–30%
Rated Current (Typ. : A)
△T=40K
*2
*3
*4
*5
ETQP4M3R3KFN
3.30
13.10 (14.41)
7.2
9.2
12.0
1
ETQP4M4R7KFN
4.70
20.70 (22.77)
5.7
7.3
9.3
1
ETQP4M100KFN
10.00
4.1
5.2
8.1
1
ETQP4M150KFN
15.00
3.3
4.2
6.7
1
±20
40.40 (44.44)
±10
63.80 (70.18)
Series
PCC-M0648M-LE
[6.4×6.0×4.8(mm)]
*1: Measured at 100 kHz
*2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4)
and measured at room temperature. See also ✽5
*3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation
performance. Note: Heat radiation constant are approx. 30 K/W measured on 6.4×6.0×4.8 mm case size. See also (✽5)
*4: Saturation rated current : DC current which causes L(0) drop –30 %.
*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.
*6: Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This
should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150°C
should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance Characteristics (Reference①)
● Inductance vs DC Current
[ ETQP4M3R3KFN ]
3
2
1
0
0
2
4
6
8
10
12
[ ETQP4M4R7KFN ]
6
Inductors (μH)
Inductors (μH)
4
14
5
4
3
2
1
0
16
0
2
4
6
DC Bias (A)
[ ETQP4M100KFN ]
10
8
6
4
2
0
0
2
4
6
8
10
DC Bias (A)
12
[
20
Inductors (μH)
Inductors (μH)
12
8
10
12
14
16
DC Bias (A)
14
16
ETQP4M150KFN ]
16
12
8
4
0
0
1
2
3
4
5
6
7
8
9
10
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Feb. 2020
Power Inductors
Performance Characteristics (Reference②)
● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4), See also ✽2
60
40
20
0
0
2
4
6
8
10
12
14
DC Bias (A)
[ ETQP4M100KFN ]
60
40
20
0
0
1
2
3
4
5
DC Bias (A)
6
7
8
Temperature rise ΔT(K)
80
[ ETQP4M3R3KFN ]
Temperature rise ΔT(K)
Temperature rise ΔT(K)
80
Temperature rise ΔT(K)
PWB condition B : Multilayer PWB with high heat dissipation performance. See also ✽3
[ ETQP4M4R7KFN ]
80
60
40
20
0
0
2
4
6
8
10
12
DC Bias (A)
[
ETQP4M150KFN ]
80
60
40
20
0
0
1
2
3
4
5
6
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Feb. 2020
Power Inductors
2. Series PCC-M0748M-LE (ETQP4M□□□KFM)
Standard Parts
Inductance
Part No.
L0
(μH)
DCR (at 20 ℃)
(mΩ)
*1
Tolerance
Typ. (max.)
(%)
Tolerance
(%)
MSL
Level
△L=–30%
Rated Current (Typ. : A)
△T=40K
*2
*3
*4
*5
ETQP4M4R7KFM
4.70
16.80(18.48)
6.5
8.8
10.7
1
ETQP4M100KFM
10.00
36.00(39.60)
4.5
6.0
9.6
1
ETQP4M220KFM
22.00
2.9
3.9
4.6
1
ETQP4M470KFM
47.00
2.2
2.9
3.7
1
±20
84.10(92.51)
±10
148.60(163.46)
Series
PCC-M0748M-LE
[7.4×7.0×4.8(mm)]
*1: Measured at 100 kHz
*2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4)
and measured at room temperature. See also ✽5
*3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation
performance. Note: Heat radiation constant are approx. 30 K/W measured on 7.4×7.0×4.8 mm case size. See also (✽5)
*4: Saturation rated current : DC current which causes L(0) drop –30 %.
*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.
*6: Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This
should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150°C
should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance Characteristics (Reference①)
● Inductance vs DC Current
[ ETQP4M4R7KFM ]
5
4
3
2
1
0
0
2
4
6
8
10
12
[ ETQP4M100KFM ]
12
Inductors (μH)
Inductors (μH)
6
14
10
8
6
4
2
0
16
0
2
4
DC Bias (A)
Inductors (μH)
Inductors (μH)
20
15
10
5
0
1
2
3
4
5
DC Bias (A)
10
12
14
16
6
[ ETQP4M470KFM ]
50
25
0
8
DC Bias (A)
[ ETQP4M220KFM ]
30
6
7
8
40
30
20
10
0
0
1
2
3
4
5
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Feb. 2020
Power Inductors
Performance Characteristics (Reference②)
● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4), See also ✽2
80
60
40
20
0
0
2
4
6
8
10
12
14
DC Bias (A)
80
80
[ ETQP4M220KFM ]
60
40
20
0
Temperature rise ΔT(K)
Temperature rise ΔT(K)
Temperature rise ΔT(K)
[ ETQP4M4R7KFM ]
80
Temperature rise ΔT(K)
PWB condition B : Multilayer PWB with high heat dissipation performance. See also ✽3
0
1
2
3
4
5
DC Bias (A)
6
7
8
[ ETQP4M100KFM ]
60
40
20
0
0
2
4
6
8
10
12
DC Bias (A)
[
ETQP4M470KFM ]
60
40
20
0
0
1
2
3
4
5
6
7
DC Bias (A)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Feb. 2020
Power Inductors
Dimensions in mm (not to scale)
Dimensional tolerance unless noted : ±0.5
Series PCC-M0648M-LE
Series PCC-M0748M-LE
(ETQP4M□□□KFN)
(ETQP4M□□□KFM)
Suffix
0.05 min.
4.8 max.
0.05 min.
2.0±0.2
1.6±0.4
1.6±0.4
Date Code Polarity
4.8 max.
1.6±0.4
1.6±0.4
Date Code Polarity
7.0±0.4
2.0±0.2
Inductance
Suffix
7.4±0.4
6.0±0.4
Inductance
6.4±0.4
Recommended Land Pattern in mm (not to scale)
Dimensional tolerance unless noted : ±0.5
Series PCC-M0648M-LE
(ETQP4M□□□KFN)
Series PCC-M0748M-LE
(ETQP4M□□□KFM)
2.0
7.4
8.0
7.0
2.2
2.2
8.4
7.4
3.0
8.4
※Don't wire on the pattern on shaded portion the PWB.
■ As for Soldering Conditions and Safety Precautions (Power Choke Coils (Automotive Grade)),
Please see Data Files
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Feb. 2020
Power Inductors
Packaging Methods (Taping)
● Embossed Carrier Tape Dimensions in mm (not to scale)
t1
B
F
A
t2
W
E
P0
P2
φD0
P1
Tape running direction
Series
A
B
W
E
F
PCC-M0648M-LE
6.6
7.1
16
1.75
7.5
12
P1
P2
P0
φ D0
1.5
0.4
5.0
PCC-M0748M-LE
7.6
8.1
16
1.75
7.5
12
2
4
1.5
0.4
6.0
A
B
C
D
E
W
330
(100)
13
21
2
17.5
2
4
t1
t2
● Taping Reel Dimensions in mm (not to scale)
Series
E
C
PCC-M0648M-LE
B
PCC-M0748M-LE
φD
W
A
Terminal
Component Placement (Taping)
Standard Packing Quantity/Reel
Serise
Part No.
PCC-M0648M-LE
ETQP4M□□□KFN
PCC-M0748M-LE
ETQP4M□□□KFM
Minimum Quantity/ Packing Unit
1,000 pcs / box(2 reel)
Quantity per reel
500 pcs
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Feb. 2020
*XLGHOLQHVDQGSUHFDXWLRQVUHJDUGLQJWKH
WHFKQLFDOLQIRUPDWLRQDQGXVHRIRXUSURGXFWV
GHVFULEHGLQWKLVRQOLQHFDWDORJ
ٹ,I\RXZDQWWRXVHRXUSURGXFWVGHVFULEHGLQWKLVRQOLQHFDWDORJIRUDSSOLFDWLRQVUHTXLULQJ
VSHFLDOTXDOLWLHVRUUHOLDELOLW\RUIRUDSSOLFDWLRQVZKHUHWKHIDLOXUHRUPDOIXQFWLRQRIWKH
SURGXFWVPD\GLUHFWO\MHRSDUGL]HKXPDQOLIHRUSRWHQWLDOO\FDXVHSHUVRQDOLQMXU\
HJDLUFUDIWDQGDHURVSDFHHTXLSPHQWWUDIILFDQGWUDQVSRUWDWLRQHTXLSPHQWFRPEXVWLRQ
HTXLSPHQWPHGLFDOHTXLSPHQWDFFLGHQWSUHYHQWLRQDQWLFULPHHTXLSPHQWDQGRUVDIHW\
HTXLSPHQWLWLVQHFHVVDU\WRYHULI\ZKHWKHUWKHVSHFLILFDWLRQVRIRXUSURGXFWVILWWRVXFK
DSSOLFDWLRQV3OHDVHHQVXUHWKDW\RXZLOODVNDQGFKHFNZLWKRXULQTXLU\GHVNDVWRZKHWKHU
WKHVSHFLILFDWLRQVRIRXUSURGXFWVILWWRVXFKDSSOLFDWLRQVXVHEHIRUH\RXXVHRXUSURGXFWV
ٹ7KHTXDOLW\DQGSHUIRUPDQFHRIRXUSURGXFWVDVGHVFULEHGLQWKLVRQOLQHFDWDORJRQO\DSSO\
WRRXUSURGXFWVZKHQXVHGLQLVRODWLRQ7KHUHIRUHSOHDVHHQVXUH\RXHYDOXDWHDQGYHULI\
RXUSURGXFWVXQGHUWKHVSHFLILFFLUFXPVWDQFHVLQZKLFKRXUSURGXFWVDUHDVVHPEOHGLQ\RXU
RZQSURGXFWVDQGLQZKLFKRXUSURGXFWVZLOODFWXDOO\EHXVHG
ٹ,I\RXXVHRXUSURGXFWVLQHTXLSPHQWWKDWUHTXLUHVDKLJKGHJUHHRIUHOLDELOLW\UHJDUGOHVV
RIWKHDSSOLFDWLRQLWLVUHFRPPHQGHGWKDW\RXVHWXSSURWHFWLRQFLUFXLWVDQGUHGXQGDQF\
FLUFXLWVLQRUGHUWRHQVXUHVDIHW\RI\RXUHTXLSPHQW
ٹ7KHSURGXFWVDQGSURGXFWVSHFLILFDWLRQVGHVFULEHGLQWKLVRQOLQHFDWDORJDUHVXEMHFWWR
FKDQJHIRULPSURYHPHQWZLWKRXWSULRUQRWLFH7KHUHIRUHSOHDVHEHVXUHWRUHTXHVWDQG
FRQILUPWKHODWHVWSURGXFWVSHFLILFDWLRQVZKLFKH[SODLQWKHVSHFLILFDWLRQVRIRXUSURGXFWVLQ
GHWDLOEHIRUH\RXILQDOL]HWKHGHVLJQRI\RXUDSSOLFDWLRQVSXUFKDVHRUXVHRXUSURGXFWV
ٹ7KHWHFKQLFDOLQIRUPDWLRQLQWKLVRQOLQHFDWDORJSURYLGHVH[DPSOHVRIRXUSURGXFWV
W\SLFDORSHUDWLRQVDQGDSSOLFDWLRQFLUFXLWV:HGRQRWJXDUDQWHHWKHQRQLQIULQJHPHQWRI
WKLUGSDUW\
VLQWHOOHFWXDOSURSHUW\ULJKWVDQGZHGRQRWJUDQWDQ\OLFHQVHULJKWRULQWHUHVW
LQRXULQWHOOHFWXDOSURSHUW\
ٹ,IDQ\RIRXUSURGXFWVSURGXFWVSHFLILFDWLRQVDQGRUWHFKQLFDOLQIRUPDWLRQLQWKLVRQOLQH
FDWDORJLVWREHH[SRUWHGRUSURYLGHGWRQRQUHVLGHQWVWKHODZVDQGUHJXODWLRQVRIWKH
H[SRUWLQJFRXQWU\HVSHFLDOO\ZLWKUHJDUGWRVHFXULW\DQGH[SRUWFRQWUROVKDOOEHREVHUYHG
5HJDUGLQJWKH&HUWLILFDWHRI&RPSOLDQFHZLWK
WKH(85R+6'LUHFWLYH5($&+5HJXODWLRQV!
ٹ7KHVZLWFKRYHUGDWHIRUFRPSOLDQFHZLWKWKH5R+6'LUHFWLYH5($&+5HJXODWLRQVYDULHV
GHSHQGLQJRQWKHSDUWQXPEHURUVHULHVRIRXUSURGXFWV
ٹ:KHQ\RXXVHWKHLQYHQWRU\RIRXUSURGXFWVIRUZKLFKLWLVXQFOHDUZKHWKHUWKRVHSURGXFWV
DUHFRPSOLDQWZLWKWKH5R+6'LUHFWLYH5($&+5HJXODWLRQSOHDVHVHOHFW6DOHV,QTXLU\LQWKH
ZHEVLWHLQTXLU\IRUPDQGFRQWDFWXV
:HGRQRWWDNHDQ\UHVSRQVLELOLW\IRUWKHXVHRIRXUSURGXFWVRXWVLGHWKHVFRSHRIWKH
VSHFLILFDWLRQVGHVFULSWLRQVJXLGHOLQHVDQGSUHFDXWLRQVGHVFULEHGLQWKLVRQOLQHFDWDORJ
$SU
Power Inductors
Safety Precautions
(Common precautions for Power Choke Coils (Automotive Grade) : Series DUST, Series MC)
・ When using our products, no matter what sort of equipment they might be used for, be sure to make a written
agreement on the specifications with us in advance. The design and specifications in this catalog are subject to
change without prior notice.
・ Do not use the products beyond the specifications described in this catalog.
・ This catalog explains the quality and performance of the products as individual components. Be fore use, check and
evaluate their operations when installed in your products.
・ Install the following systems for a failsafe design to ensure safety if these products are to be used in equip ment
where a defect in these products may cause the loss of human life or other significant damage, such as damage to
vehicles (au to mo bile, train, vessel), traffic lights, medical equipment, aerospace equipment, elec tric heating
appliances, com bus tion/gas equipment, rotating equipment, and disaster/crime prevention equip ment.
✽ Systems equipped with a protection circuit and a protection device.
✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault.
■Precautions for use
1. Provision to abnormal condition
This power choke coil itself does not have any protective function in abnormal condition such as overload,
short-circuit and open-circuit conditions, etc.
Therefore, it shall be confirmed as the end product that there is no risk of smoking, fire, dielectric withstand
voltage, insulation resistance, etc. in abnormal conditions to provide protective devices and/or protection circuit
in the end product.
2. Temperature rise
Temperature rise of power choke coil depends on the installation condition in end products. It shall be confirmed
in the actual end product that temperature rise of power choke coil is in the limit of specified temperature class.
3. Dielectric strength
Dielectric withstanding test with higher voltage than specific value will damage Insulating material and shorten
its life.
4. Water
This Power choke coil must not be used in wet condition by water, coffee or any liquid because insulation
strength becomes very low in such condition.
5. Potting
If this power choke coil is potted in some compound, coating material of magnet wire might be occasionally
damaged. Please ask us if you intend to pot this power choke coil.
6. Model
When this power choke coil is used in a similar or new product to the original one, it might be unable to satisfy
he specifications due to difference of condition of usage.
Please ask us if you use this power choke coil in the manner such as above.
7. Drop
If the power choke coil receives mechanical stress such as drop, characteristics may become poor (due to
damage on coil bobbin, etc.). Never use such stressed power choke coil.
8. Buzz Noise
When this coil is used in the frequency band of the audible range (≒ 20 Hz to 20 kHz), or, when using in
burst mode, depending on the operating conditions (conditions of the energized waveform) sounds (buzz noise)
may occur. Depending on the circuit / board installation environment it may be heard as abnormal sounds,
so please check in advance.
9. Solvent (Series MC)
If this power choke coil is dipped in the cleaning agent, and the coating agent of the toluene and the xylene
system, there is a possibility that the performance decreases greatly. Please ask us if you intend to pot this power
choke coil.
10. Static electricity measures (Series MC)
① Circuit design
Please set up the ESD measures parts such as capacitors in the former steps of this power choke coil for static
electricity when there is a possibility that static electricity is impressed to the choke coil on the circuit.
Moreover, please consult our company about such a case once.
01. Oct. 2019
Power Inductors
② Treatment with single
Take countermeasures against static electricity when using single power choke coil. (process and equipment)
There is a possibility that the characteristic changes when the voltage of 200 V or more is impressed to this
power choke coil. Please handle 200 V or less.
11. Printed circuit board design
① Land pattern and Via which exceed Operating Voltage, should not be placed top layer PWB under the products
for keeping isolation between inside coil and surface of PWB. (Series DUST)
② To the opposing part in this power choke coil bottom please install neither pattern nor the beer, etc. (Series MC)
8
8.4
3.8
The opposing part in
the choke coil bottom
2.8
10
③ Parts arranged around this power choke coil do
not touch the surface of this power choke coil
(Top side and side). (Series MC)
Top side
Side
The opposing
part in the
choke coil
bottom
(PWB)
Side
④ This power choke coil is different from the ferrite core-type that installs general concentration GAP.
It has the leakage magnetic bunch distribution of the choke coil to the vertical direction. Please be cautious
when using parts and circuit compositions which are easily affected by the leakage flux.
12. Other using emviroment
This power choke coil is not designed for the use in the following, special environment.
Therefore, please do not use it in the following special environment.
• Use in place where a lot of causticity gases such as sea breeze, Cl2, H2S, NH3, SO2, and Nox exist.
• Use in place where out-of-door exposure and direct sunshine strike.
13. Core Chipping and Core Crack
This choke coil has a possibility to make partial chipping or crack in the core due to excessive mechanical stress
from outside, and might have initially a partial chipping and/or cracks that do not affect the quality.
14. Keeping environment
If this power choke coil is kept under following environment and condition, there is a possibility that the
performance and soldering decreases greatly.
• Keep in place where a lot of causticity gases such as sea breeze, Cl2, H2S, NH3, SO2, and Nox exist.
• Keep in place where out-of-door exposure and direct sunshine strike.
■AEC-Q200 Compliant
The products are tested based on all or part of the test conditions and methods defined in AEC-Q200.
Please consult with Panasonic for the details of the product specification and specific evaluation test results,
etc., and please review and approve Panasonic's product specification before ordering.
<Package markings>
Package markings include the product number, quantity, and country of origin.
In principle, the country of origin should be indicated in English.
01. Oct. 2019