EVAL_PAN4555ETU

SNAP PAN4555ETU The PAN4555ETU Easy-To-Use (ETU) module is the easiest way to make the first step into the mesh networking world. It provides pinned I/O for testing and prototyping with a 0.1” (2.5mm) perf or stripboard. No special designs are needed to get this module working. This module is a short range, low power, 2.4 GHz ISM band transceiver which includes a complete 802.15.4 physical layer (PHY) modem. Designed for the IEEE 802.15.4 wireless standard and an independant micro-controller (MCU) with a reference oscillator to provide a cost effective solution for shortrange data links and networks. Software is included. Product Performance: • • • • • • • • • • • • • • Pin Pitch: 2.54mm / 0.1” 16 Selectable Channels With 250 Kbps In The 2.4 GHz Band Low Power Modes For Increased Battery Life High Sensitivity Of -92 dBm Typical At 1% Packet Error Rate 0 dBm Typ. Output Power Programmable Over A 30 dB Range Low Supply Voltage: 2.0 V To 3.4 V, 2.7 V Typical Operating Temperature Range: -40°C To +85°C Link Quality And Clear Channel Assessment Capability 60k Flash And 4k RAM Memory 4 Channel A/d Converter With 10 Bit Adc For Fast And Easy Conversion From Analog Inputs (Temperature, Pressure And Fluid Levels) To Digital Values 3 Channel 16 Bit Timer/pulse Width Modulation (Tpm) Outputs BDM Port For Direct Download Programming In Total 20 Digital I/O Lines With Programmable Pull-ups And Few With High-current Driver FCC, ETSI, IC Approved Applications: • • • • • Remote Control And Wire Replacement In Industrial Systems Such As Wireless Sensor Networks Factory / Home Automation And Motor / Lighting Control Inventory Management And RFID Tagging Automated Meter Reading Monitoring (Environmental, Patient or Fitness) Part Numbers: Part Number Description EVAL_PAN4555ETU PAN4555 Development Module, 2.4 GHz Panasonic Electronic Components http://www.panasonic.com/rfmodules 1-800-344-2112 10 ® SNAP ® PAN4555ETU Dimensions & Pin Layout: Pin Name Pin No. Pin Name 15.24mm / 0.6” Pin No. 2.54mm, 0.1” Fits into normal 2.54mm / 0.1” pitch Note: The pin names of the module and the internal MC13213 are equivalent. Technical Specifications: Parameter Value Condition / Notes -92 dBm typical For 1% Packet Error Rate Output Power 0 dBm Maximal Power Supply 2.0 V to 3.4 V Single Supply, 2.7 V Typical Receiver Sensitivity Power Control Range 30 dB Maximum Data Rate 250 kbps Current Consumption Receive Mode Transmit Mode Idle Mode Doze Mode Hibernate Mode Off Mode 37 mA typ. 30 mA typ. 500 uA typ. 35 uA typ. 1 uA typ.