EVJ-Y81F30B54

Rotary Potentiometers/EVJC/EVJY Japan Malaysia 12 mm Square Two-in-One Rotary Potentiometers (Dual Type) Type: EVJC/EVJY ■ Features ■ Recommended Applications ● Rectangular-shaped, automatic mounting type ● High tactile feedback ● Available for automatic dip soldering (Flux-proof ● Audio Equipment ● Video Equipment ● Electronic Musical Instruments structure) ● Highly reliable and dust-proof ■ Explanation of Part Numbers 1 2 3 4 E V J C Y Product Code 5 6 Specifications 7 8 9 10 Shaft Trims & Dimensions 11 12 Taper & Resistance ■ Product Chart Installation direction Style Height (H=mm) 10.0 Without bushing Applications Detent Type Volume control Without detent EVJC00 Without detent EVJC30 Tone control Volume control 12.5 Tone control Volume control 10.0 Horizontal With bushing Tone control Volume control 12.5 Tone control Volume control 10.0 With sleeve Tone control Volume control 12.5 Tone control Volume control Without bushing — Tone control Volume control Vertical With bushing With sleeve — — Tone control Midpoint EVJC31 Without detent EVJC90 Without detent EVJC40 Midpoint EVJC41 Without detent EVJC20 Without detent EVJC50 Midpoint EVJC51 Without detent EVJCB0 Without detent EVJCH0 Midpoint EVJCH1 Without detent EVJC25 Without detent EVJC55 Midpoint EVJC56 Without detent EVJCB5 Without detent EVJCH5 Midpoint EVJCH6 Without detent EVJY00 Without detent EVJY80 Midpoint EVJY81 Without detent EVJY10 Without detent EVJY90 Midpoint EVJY91 Volume control Without detent EVJY15 Tone control Without detent Midpoint EVJY95 EVJY96 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Oct. 2005 Rotary Potentiometers/EVJC/EVJY ■ Specifications Classification Item Applications 12 mm square Two-in-One Rotation Angle Mechanical Specifications 300 ° Rotation Torque 2 mN·m to 20 mN·m Shaft Stopper Strength 0.5 N·m min. Shaft Pull/Push Strength 80 N min. Shaft Inclination (Measured at the top of the shaft) 0.35 mm max. Bushing-Nut Tightening Torque 1 N·m max. Nominal Total Resistance 5 k
to 500 k
(Tolerance ±20 %) Taper A, B, C, D, G, BH Power Derating Curve 100 Type Taper & Terminal Residual Resistance Electrical Specifications Maximum Attenuation (for volume control, taper A, B, D) Endurance Nominal Total Resistance Rated Load(%) Power Rating 0.05 W (0 °C to 50 °C) For potentiometers operating in ambient temperatures above 50 °C, Rating should be derated in accordance with the figure on the right. 80 60 40 33 20 0 20 40 60 70 Ambient Temperature(°C) For general purpose (tone) For volume control A, B, D, G B, C, G A, D C A, B, D A, B, D C C 1 to 2 2 to 3 2 to 3 1 to 2 1 to 2 2 to 3 1 to 2 2 to 3 5 k
< R < 50 k
25
max. 25
max. 15
max. 25
max. 20
max. 50 k
< R < 250 k
25
max. 50
max. 15
max. 50
max. 20
max. 250 k
< R < 500 k
100
max. 100
max. 50
max. 100
max. 50
max. Nominal total resistance 5 k
< R < 10 k
10 k
< R < 50 k
50 k
< R < 100 k
100 k
< R Max. Attenuation –65 dB max. –72 dB max. –82 dB max. –92 dB max. Insertion loss 0.1 dB max. Tracking For volume control within ±3 dB at –40 to 0 dB For Tone control within ±3 dB at midpoint Insulation Resistance 100 M
min. at 250 Vdc Dielectric Withstand Voltage 300 Vac for 1 minute Noise Level 47 mV max. Apply 20 V (When Voltage Rating < 20 V, use the rated voltage.) Rotate shaft at 30 r/min. Operating Life ✽1 15000 cycles min. Minimum Quantity/Packing Unit ✽2 Packing Unit ✽2 80 pcs. (Tray Pack) L20.0 mm 800 pcs. L20.0 mm ✽1 : No direct current should be applied. ✽2 : With bushing : L=L+7.5 mm Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Dec. 2005 Rotary Potentiometers/EVJC/EVJY ■ Dimensions in mm (not to scale) for Volume : EVJC00, EVJC90 for Tone : EVJC30, EVJC40 (without detent) (with detent) ● Horizontal, without Bushing .......................................................................................... EVJC31, EVJC41 No. 1 14.2±1.0 12.1±1.0 11.0 (0.3) (1.3) (0.4) 5.2 ˚ H (6.0) 5-2.0 11.0±1.0 14.0±0.7 6-f 0.8 (3.6) (3.5) (5.5) 8.7 0.3±0.1 0.6±0.1 L 2.1+0.1 0 +0.1 0 Recommended PWB piercing plan (Pitch tolerance: ±0.1) View from mounting side 2.0 3.3 6.7 2.0 3.3 12.2±0.1 5-2.0 (f 7.0) (5.0) 6.5 6.8 30 ˚± 5 (2.5) for Volume : EVJC20, EVJCB0 for Tone : EVJC50, EVJCH0 (without detent) ............................................................................................... EVJC51, EVJCH1 Horizontal, with Bushing (with detent) ● No. 2 14.2±1.0 12.1±1.0 11.0 8.0±0.2 30 ˚± 5˚ 2.0 7.5 (6.0) H (5.5) 8.7 8.0±0.2 5-2.0 2.0 (3.6) (3.5) 6-f 0.8 0.3±0.1 0.6±0.1 5-2.0 11.0±1.0 14.0±0.7 L Mounting surface 7.5 +0.1 0 Mounting surface Recommended PWB piercing plan (Pitch tolerance: ±0.1) View from mounting side 2.0 3.3 3.3 2.0 12.2±0.1 +0.1 2.1 0 (0.4) 6.5 6.8 M9 P=0.75 6.0 0.8 (2.5) for Volume : EVJC25, EVJCB5 for Tone : EVJC55, EVJCH5 (without detent) (with detent) ● Horizontal, with Sleeve.................................................................................................. EVJC56, EVJCH6 No. 3 6.0 7.5 (5.5) 2.0 (3.6) (3.5) 6-f 0.8 0.3±0.1 0.6±0.1 2-5.0 11.0±1.0 14.0±0.7 2.0 (6.0) H 6.5 6.8 12.2±0.1 5-2.0 2.1 +0.1 0 3.3 (0.4) 0.8 8.7 8.0±0.2 f 9.0 14.2±1.0 12.1±1.0 11.0 8.0±0.2 30 °± 5° 2.0 side A Recommended PWB piercing plan (Pitch tolerance: ±0.1) View from mounting side 2.0 3.3 (2.5) 7.5 Side A L +0.1 0 for Volume : EVJY00 for Tone : EVJY80 (without detent) (with detent) ● Vertical, without Bushing .............................................................................................................. EVJY81 No. 4 (3.6) 6.7 5.2 13.8±1.0 2.0 (0.3) (3.2) 0. 0.1 13.0 11.0 (5.5) 8.7 0.6±0.1 2-5.0 2.1 +0.1 0 5° (5.5) 6.5 6.8 30 °± (1.3) 0.3 13.0±0.5 2.0 11.0±0.1 L 12.1±1.0 11.0 6-f 0.8 +0.1 0 5-2.0 Recommended PWB piercing plan (Pitch tolerance: ±0.1) View from mounting side Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Mar. 2005 Rotary Potentiometers/EVJC/EVJY for Volume : EVJY10 for Tone : EVJY90 (without detent) (with detent) ● Vertical, with Bushing ................................................................................................................... EVJY91 No. 5 L 7.5 6.0 (3.6) 13.8±1.0 2.1 +0.1 0 11.0 (0.3) (3.2) 2-5.0 13.0 0.3 ± 0.1 0.6±0.1 13.0±0.1 2.0 11.0±0.1 (5.5) 6.5 6.8 2.0 ± 0.5 0.8 (5.5) 8.7 8.0 ± 0.2 M9, P=0.75 12.1±1.0 11.0 8.0±0.2 30 ˚± 5˚ 6-f 0.8 +0.1 0 5-2.0 Recommended PWB piercing plan (Pitch tolerance: ±0.1) View from mounting side Mounting surface for Volume : EVJY15 for Tone : EVJY95 (without detent) (with detent) ● Vertical, with Sleeve ...................................................................................................................... EVJY96 No. 6 (3.6) 13.0±0.1 2.0 13.0±0.5 11.0 (3.2) 0.3±0.1 2.0 11.0±0.1 2.0 0.8 (5.5) (5.5) 6.5 8.7 6.8 8.0±0.5 f9.0 7.5 6.0 2.1+0.1 0 L 12.1±1.0 11.0 8.0±0.5 30 ˚±5 ˚ 2.0 6-f0.8+0.1 0 5-2.0 Recommended PWB piercing plan (Pitch tolerance: ±0.1) View from mounting side Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Nov. 2005 Rotary Potentiometers/EVJC/EVJY ■ Circuit Diagram and PWB Piercing Plan Volume control without tap 3 With tap Tone control 3 2 2 Relation of mounting holes and terminals 3 3 2 2 ———— 1 2 1 1 1 2 1 3 3 2 1 1 1 2 3 3 Notes: 1. I=Resistor 1, II=Resistor 2 2. Relation of mounting holes and terminals. Refer to each piercing plan for dimensions. 3. View from mounted part side. ■ Shaft Trims and Dimensions in mm Dimensions 0 6.0 –0.1 30 f 0 4.5 –0.1 k1 Trim Position C Terminal side Note: The drawing at full CCW position Dimensions in mm Shaft Style Horizontal 6.7 L without Bushing L 6.7 Vertical Horizontal with Bushing or with Sleeve k2 L 7.5 Vertical k2 7.5 L Bushing, Sleeve L m1 Corner cut m2 15.0 4.5 C0.5 — 20.0 7.0 C1.0 — 25.0 12.0 C1.0 — 30.0 12.0 C1.0 — 15.0 4.5 C0.5 — 20.0 7.0 C1.0 — 25.0 12.0 C1.0 — 30.0 12.0 C1.0 — 12.5 7.0 C1.0 5.0 15.0 7.0 C1.0 5.0 17.5 12.0 C1.0 5.0 20.0 12.0 C1.0 5.0, 7.0 22.5 12.0 C1.0 5.0, 7.0 12.5 7.0 C1.0 5.0 15.0 7.0 C1.0 5.0 17.5 12.0 C1.0 5.0 20.0 12.0 C1.0 5.0, 7.0 22.5 12.0 C1.0 5.0, 7.0 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Mar. 2005