EVM-1USX30BY2

SMT Trimmer Potentiometers 4 mm Square SMT Trimmer Potentiometers (Cermet, Open Frame Type) Type: 1U EVM1D EVM1E EVM1U 1E 1D Features ● 4 mm square series for reflow soldering ● Both sides adjust type (EVM1U) ● High reliability realized by cermet element ● Excellent mountability ● Conforms to JIS C5260-1:1999 ● RoHS compliant Recommended Applications ● Audio/visual, ● General office, and communication equipment electronic equipment Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 10 11 12 E V M 1 D S X 3 0 B 5 2 Product Code Type/Structure (1D, 1E, 1U) Packaging Taper & Resistance Example : B52=500 Ω Specifications 100 Ω to 1 MΩ ±25 % Total Resistance Value Resistance Tolerance Power Rating Limiting Element Voltage 0.2 W 50 V Rotation Torque 2 to 20 mN·m ±250 × 10 –6/°C Temperature Coefficient of Resistance Minimum Quantity/Packing Unit Taping Part Number EVM1D EVM1E EVM1U Quantity per reel Packaging quantity Dia. of reel (mm) 1,000 4,000 0178 The standard packaging methods for a reel is 0178. Please contact us, if you would like different packaging methods. (Bulk, Reel of 0330, Reel of 0380) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Jul. 2014 SMT Trimmer Potentiometers Dimensions in mm (not to scale) ● 3-terminal, Cross Slot.............................................................................................................................................. EVM1D No. 1 1.4 1.4 2.4 Resin 2.2 4.5 2 1.2 1.5 2.2 2.3 Wiper position mark a 2.6 2.5 1.1 1.4 3.8 b c 1.6 4.2 1.6 3.5 Resistance Driver Slot width 0.55 length 2.5 depth 0.35 (Recommended Land Pattern) a c b (Circuit diagram) Mass (Weight) : 58 mg/pc. ● 3-terminal, Cross Slot............................................................................................................................................... EVM1E No. 2 Wiper position mark b c 1.4 2.5 2.4 1.1 1.4 1.2 1.35 2.2 1.85 1.4 4.2 2.2 2 a Resistance Resin 2.6 2 1.4 3.8 0.8 1.9 3.5 Driver Slot width 0.55 length 2.5 depth 0.35 0.8 2 4.4 (Recommended Land Pattern) a c b (Circuit diagram) Mass (Weight) : 58 mg/pc. ● 3-terminal, Cross Slot, Both Sides Adjust ............................................................................................................ EVM1U c 1.4 2.5 f2.3 1.1 1.4 1.2 2.2 f1.7 b 1.4 2.2 4.5 a 2.4 1.4 Dummy 4 2 2 3.8 2.6 Wiper position mark 1.4 0.5 1.5 2.3 No. 3 0.8 1.9 Resistance Driver Slot width 0.55 length 2.5 depth 0.35 Mass (Weight) : 71 mg/pc. 0.8 2 4.4 3.5 Driver Slot width 0.45 depth 0.35 (Recommended Land Pattern) a c b (Circuit diagram) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Jul. 2014