EVPANDA1A

Light Touch Switches/EVPAN 3.5 mm×2.9 mm Side-operational Half Dive /SMD Light Touch Switches Type: EVPAN ■ Features ● External dimensions : 3.5 mm×2.9 mm (Excluding the push plate), Height 1.2 mm ● Printed circuit board being as low as 0.7 mm ● High mount ability ■ Recommended Applications ● Operation switches for portable electronic equipment (Mobile phones, Digital still cameras, Camcorders, Portable audio players, etc.) ■ Explanation of Part Numbers 1 2 3 Product Code 4 5 Type 6 7 Operating Force 8 9 1 A Terminal type (Straight/L-shape) ■ Specifications Type Snap action / Push-on type SPST Rating 10 μA 2 V DC to 50 mA 12 V DC (Resistive load) Contact Resistance 500 mΩ max. Insulation Resistance Electrical 100 MΩ min. (at 100 V DC) Dielectric Withstanding Voltage 250 V AC for 1 minute Bouncing 10 ms max. (ON, OFF) Operating Force Mechanical 1.6 N, 2.2 N Push Travel Endurance 0.2 mm Push Strength 70 N (1 minute) Operating Life 100,000 cycles min. Operating Temperature –20 °C to +70 °C –40 °C to +85 °C (Bulk) –20 °C to +60 °C (Taping) Storage Temperature Minimum Quantity/Packing Unit 7,000 pcs. Embossed Taping (Reel Pack) Quantity/Carton 35,000 pcs. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately.  LQGXVWULDOSDQDVRQLFFRPDFH 1 © Panasonic Corporation 2019 ANCTB28E 201903-Fd Light Touch Switches/EVPAN ■ Dimensions in mm (not to scale) EVPANA EVPAND , 1 2 2 , 0.85 Straight terminals 1 3.5 2.9 (Embossed Taping) General dimension tolerance : ± 0.2 ( )dimensions are reference dimensions. 1.2±0.2 0.70±0.15 0.5 5.2 3.5 1.4 0.95 , 1 1 2 2 , 0.9±0.1 0.775±0.05 5.5±0.1 3.55±0.10 3.0 +0.1 0 2.10±0.05 Circuit diagram 0.8 3.1 +0.1 0 2.9 1.2±0.1 0.3±0.1 1.55 2.125 R0.5 max PWB land pattern for reference Part Numbers Operating Force Height Push Plate Color Operating Life EVPANAA1A 1.6 N 0.7 mm Black 100,000 cycles EVPANDA1A 2.2 N 0.7 mm Black 100,000 cycles EVPANBA1A 1.6 N 0.7 mm Black 500,000 cycles (Embossed Taping) , 1 1 2 2 3.5 2.9 , 0.85 L-shape terminals General dimension tolerance : ± 0.2 ( )dimensions are reference dimensions. 1.2±0.2 0.70±0.15 0.5 5.2 3.5 0.6±0.1 EVPAND EVPANB 0.95 0.4 1.4 , 1 1 2 2 , 0.85±0.1 5.7±0.1 3.55±0.10 +0.1 0 2.25±0.05 2.10±0.05 0.775±0.05 Circuit diagram 4.6 φ 0. 0.8 3.0 7 3.1 +0.1 0 2.9 4.7±0.1 1.2±0.1 +0 0 .1 1.55 2.125 R0.5 max PWB land pattern for reference Part Numbers Operating Force Height Push Plate Color Operating Life EVPANDE1A 2.2 N 0.7 mm Black 100,000 cycles EVPANBE1A 1.6 N 0.7 mm Black 500,000 cycles Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ 2 © Panasonic Corporation 2019 ANCTB28E 201903-Fd Light Touch Switches/EVPAN ■ Recommended Solder Mask 0.775±0.05 0.85±0.05 1.2±0.05 0.775±0.05 0.85±0.05 1.2±0.05 2.1±0.05 5.7±0.05 3.55±0.05 2.1±0.05 5.7±0.05 3.55±0.05 4.7±0.05 0.2±0.05 Recommended Solder Mask B Recommended Solder Mask A In case to much solder pastels applied B mask would be good to resolve the phenomenon. ■ Recommended Reflow Soldering Conditions Operation Top (°C) MAX. 260 Fan or Normal Temp. 230 180 150 (Normal Temp.) 90±30 40±10 Soldering Time (s) ● Embossed Carrier Taping Tape width=12.0 mm t1 Feeding hole Chip pocket P2 P0 Taping condition : Lack of products in the middle of taping should be one MAX, but total quantity specified in the specifications should be secured. Peeling off strength of top tape : It should be within 0.2N to 1.0N at 165 degree in peeling off angle. Joint of carrier tape : One joint per one reel may exist. E φD0 B F W A t2 P1 Chip component Tape running direction ● Straight terminals Unit: mm Part No. Height A B W EVPAN 1.2 5.6±0.2 4.5±0.2 12.0±0.3 F E P1 5.5±0.1 1.75±0.10 8.0±0.1 P2 P0 D0 Dia. 2.0±0.1 4.0±0.1 1.5 _0 +0.1 t1 t2 0.3±0.1 1.35±0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ 3 © Panasonic Corporation 2019 ANCTB28E 201903-Fd Requests to customers Please refer to "the latest product specifications" when designing your product. Requests to customers : https://industrial.panasonic.com/ac/e/salespolicies/ Safety Precautions When using our products, no matter what sort of equipment they might be used for, be sure to confirm the applications and environmental conditions with our specifications in advance. Please contact .......... Electromechanical Control Business Division 1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8506, Japan industrial.panasonic.com/ac/e/ ©Panasonic Corporation 2019 ANCTB28E-1 201903-Fd Specifications are subject to change without notice.