EVPASEC1A

Light Touch Switches/EVPAS 6 mm Square Long Travel 2 terminals SMD Light Touch Switches Type: EVPAS ■ Features ● External dimensions : 6.0 mm×6.1 mm, Height 5.0 mm (Including the push plate) ● Steady and low contact resistance (100 mΩ max.) ● Excellent solderability (J-bent-type terminals) ■ Recommended Applications ● Operating switches for car electronic equipments. ● Input on operating switches for telephones, electronic musical instruments, etc. ■ Explanation of Part Numbers(Standard specification only) 1 2 3 Product Code 4 5 6 7 8 9 Push Plate Color・Product Height Type Operating Force・Travel ■ Specifications Type Snap action/Push-on type SPST Rating 10 μA 2 V DC to 50 mA 12 V DC (Resistive load) Contact Resistance Electrical 100 mΩ max. Insulation Resistance 100 MΩ min. (at 100 V DC) Dielectric Withstanding Voltage 250 V AC for 1 minute Bouncing 10 ms max. (ON, OFF) Type Mechanical Operating Force Travel Operating Life Endurance Narrow tolerance operating force type Standard type 1.6 N±0.5 N ー ー 2.0 N±0.6 N ー ー ー 2.2 N±0.6 N ー 2.5 N±0.6 N 2.5 N±0.6 N ー 3.0 N±0.8 N ー 3.0 N±0.6 N 3.5 N±1.0 N ー ー ー ー 3.6 N±0.8 N ー ー 4.0 N±0.85 N 1.3 mm±0.2 mm 1.0 mm±0.2 mm 1.6 N, 2.0 N, 2.2 N, 2.5 N type: 100,000 cycles min. 3.0 N type: 200,000 cycles min. 3.5 N type: 100,000 cycles min. 3.0 N, 3.6 N with Narrow tolerance type: 300,000 cycles min. 4.0 N with Narrow tolerance type: 200,000 cycles min. Operating Temperature –40 °C to +90 °C –40 °C to +90 °C (Bulk) –20 °C to +60 °C (Taping) Storage Temperature Minimum Quantity/Packing Unit 2,000 pcs. Embossed Taping (Reel Pack) Quantity/Carton 10,000 pcs. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. ビパビパハパヒ LQGXVWULDOSDQDVRQLFFRPDFH 1 © Panasonic Corporation 2020 ANCTB38E 201912 Light Touch Switches/EVPAS ■ Dimensions in mm (not to scale) General dimension tolerance : ± 0.2 ( )dimensions are reference dimensions. EVPAS (Embossed Taping) 6.0 .2 R0 B 1.4 6.1 A φ4.6 5.0 3.5 Knob A B 1.0±0.3 Circuit diagram 7.0±0.3 8.0±0.1 (4.0) 2.0±0.1 4.0±0.1 PWB land pattern for reference Part Numbers Operating Force Travel Height Push Plate Color Operating Life EVPASCB1A 2.2 N 1.0 mm 5.0 mm Black 100,000 cycles EVPASDB1A 2.5 N 1.0 mm 5.0 mm Black 100,000 cycles EVPASAC1A 1.6 N 1.3 mm 5.0 mm Black 100,000 cycles EVPASBC1A 2.0 N 1.3 mm 5.0 mm Black 100,000 cycles EVPASDC1A 2.5 N 1.3 mm 5.0 mm Black 100,000 cycles EVPASKC1A 3.0 N 1.3 mm 5.0 mm Black 200,000 cycles EVPASJC1A 3.5 N 1.3 mm 5.0 mm Black 100,000 cycles Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ 2 © Panasonic Corporation 2020 ANCTB38E 201912 Light Touch Switches/EVPAS ■ Dimensions in mm (not to scale) General dimension tolerance : ± 0.2 ( )dimensions are reference dimensions. EVPAS (Embossed Taping) (Narrow tolerance operating force type) 6 A B 6.1 1.4 R0.2 φ 4.6 Knob B 3.5 5 A Circuit Diagram 1±0.3 6.6±0.3 （4.2） 8±0.1 2±0.1 4±0.1 Land pattern plan Knob color : BLACK Solder thickness t=0.15±0.03 Part Numbers Operating Force Travel Height Push Plate Color Operating Life EVPAS4D1A 3.0 N 1.0 mm 5.0 mm Black 300,000 cycles EVPAS3D1A 3.6 N 1.0 mm 5.0 mm Black 300,000 cycles EVPAS5D1A 4.0 N 1.0 mm 5.0 mm Black 200,000 cycles Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ 3 © Panasonic Corporation 2020 ANCTB38E 201912 Light Touch Switches/EVPAS ■ Recommended Reflow Soldering Conditions MAX. 260 Fan or Normal Temp. Operation Top (°C) 230 180 150 (Normal Temp.) 90±30 40±10 Soldering Time (s) ● Embossed Carrier Taping Tape width=12.0 mm t1 Feeding hole Chip pocket P2 P0 E φD0 Taping condition : Lack of products in the middle of taping should be one MAX, but total quantity specified in the specifications should be secured. Peeling off strength of top tape : It should be within 0.2N to 1.0N at 165 degree in peeling off angle. Joint of carrier tape : One joint per one reel may exist. B F W A t2 Chip component P1 Tape running direction Unit: mm Part No. EVPAS Height 5.0 A 6.8±0.2 B 7.7±0.2 W 12.0±0.3 F E P1 P2 5.5±0.1 1.75±0.10 8.0±0.1 2.0±0.1 P0 4.0±0.1 D0 Dia. 1.5 +0.1 –0 t1 t2 0.4±0.1 5.25±0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ 4 © Panasonic Corporation 2020 ANCTB38E 201912 Requests to customers Please refer to "the latest product specifications" when designing your product. Requests to customers : https://industrial.panasonic.com/ac/e/salespolicies/ Safety Precautions When using our products, no matter what sort of equipment they might be used for, be sure to confirm the applications and environmental conditions with our specifications in advance. Please contact .......... Electromechanical Control Business Division 1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8506, Japan industrial.panasonic.com/ac/e/ ©Panasonic Corporation 2020 ANCTB38E 201912 Specifications are subject to change without notice.