Light Touch Switches/EVPAS
6 mm Square Long Travel 2 terminals
SMD Light Touch Switches
Type:
EVPAS
■ Features
● External dimensions : 6.0 mm×6.1 mm, Height 5.0 mm
(Including the push plate)
● Steady and low contact resistance (100 mΩ max.)
● Excellent solderability (J-bent-type terminals)
■ Recommended Applications
● Operating switches for car electronic equipments.
● Input on operating switches for telephones, electronic
musical instruments, etc.
■ Explanation of Part Numbers(Standard specification only)
1
2
3
Product Code
4
5
6
7
8
9
Push Plate Color・Product Height
Type
Operating Force・Travel
■ Specifications
Type
Snap action/Push-on type SPST
Rating
10 μA 2 V DC to 50 mA 12 V DC (Resistive load)
Contact Resistance
Electrical
100 mΩ max.
Insulation Resistance
100 MΩ min. (at 100 V DC)
Dielectric Withstanding Voltage
250 V AC for 1 minute
Bouncing
10 ms max. (ON, OFF)
Type
Mechanical
Operating Force
Travel
Operating Life
Endurance
Narrow tolerance
operating force type
Standard type
1.6 N±0.5 N
ー
ー
2.0 N±0.6 N
ー
ー
ー
2.2 N±0.6 N
ー
2.5 N±0.6 N
2.5 N±0.6 N
ー
3.0 N±0.8 N
ー
3.0 N±0.6 N
3.5 N±1.0 N
ー
ー
ー
ー
3.6 N±0.8 N
ー
ー
4.0 N±0.85 N
1.3 mm±0.2 mm
1.0 mm±0.2 mm
1.6 N, 2.0 N, 2.2 N, 2.5 N type: 100,000 cycles min.
3.0 N type: 200,000 cycles min.
3.5 N type: 100,000 cycles min.
3.0 N, 3.6 N with Narrow tolerance type: 300,000 cycles min.
4.0 N with Narrow tolerance type: 200,000 cycles min.
Operating Temperature
–40 °C to +90 °C
–40 °C to +90 °C (Bulk)
–20 °C to +60 °C (Taping)
Storage Temperature
Minimum Quantity/Packing Unit
2,000 pcs. Embossed Taping (Reel Pack)
Quantity/Carton
10,000 pcs.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
ビパビパハパヒ
LQGXVWULDOSDQDVRQLFFRPDFH
1
© Panasonic Corporation 2020
ANCTB38E 201912
Light Touch Switches/EVPAS
■ Dimensions in mm (not to scale)
General dimension tolerance : ± 0.2
( )dimensions are reference dimensions.
EVPAS
(Embossed Taping)
6.0
.2
R0
B
1.4
6.1
A
φ4.6
5.0
3.5
Knob
A
B
1.0±0.3
Circuit diagram
7.0±0.3
8.0±0.1
(4.0)
2.0±0.1
4.0±0.1
PWB land pattern for reference
Part Numbers
Operating Force
Travel
Height
Push Plate Color
Operating Life
EVPASCB1A
2.2 N
1.0 mm
5.0 mm
Black
100,000 cycles
EVPASDB1A
2.5 N
1.0 mm
5.0 mm
Black
100,000 cycles
EVPASAC1A
1.6 N
1.3 mm
5.0 mm
Black
100,000 cycles
EVPASBC1A
2.0 N
1.3 mm
5.0 mm
Black
100,000 cycles
EVPASDC1A
2.5 N
1.3 mm
5.0 mm
Black
100,000 cycles
EVPASKC1A
3.0 N
1.3 mm
5.0 mm
Black
200,000 cycles
EVPASJC1A
3.5 N
1.3 mm
5.0 mm
Black
100,000 cycles
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/
2
© Panasonic Corporation 2020
ANCTB38E 201912
Light Touch Switches/EVPAS
■ Dimensions in mm (not to scale)
General dimension tolerance : ± 0.2
( )dimensions are reference dimensions.
EVPAS
(Embossed Taping)
(Narrow tolerance operating force type)
6
A
B
6.1
1.4
R0.2
φ 4.6
Knob
B
3.5
5
A
Circuit Diagram
1±0.3
6.6±0.3
(4.2)
8±0.1
2±0.1
4±0.1
Land pattern plan
Knob color : BLACK
Solder thickness t=0.15±0.03
Part Numbers
Operating Force
Travel
Height
Push Plate Color
Operating Life
EVPAS4D1A
3.0 N
1.0 mm
5.0 mm
Black
300,000 cycles
EVPAS3D1A
3.6 N
1.0 mm
5.0 mm
Black
300,000 cycles
EVPAS5D1A
4.0 N
1.0 mm
5.0 mm
Black
200,000 cycles
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/
3
© Panasonic Corporation 2020
ANCTB38E 201912
Light Touch Switches/EVPAS
■ Recommended Reflow Soldering Conditions
MAX.
260
Fan or Normal Temp.
Operation Top (°C)
230
180
150
(Normal Temp.)
90±30
40±10
Soldering Time (s)
● Embossed Carrier Taping
Tape width=12.0 mm
t1
Feeding hole
Chip pocket
P2 P0
E
φD0
Taping condition : Lack of products in the middle of taping should be
one MAX, but total quantity specified in the
specifications should be secured.
Peeling off strength of top tape : It should be within 0.2N to 1.0N at
165 degree in peeling off angle.
Joint of carrier tape : One joint per one reel may exist.
B
F
W
A
t2
Chip component
P1
Tape running direction
Unit: mm
Part No.
EVPAS
Height
5.0
A
6.8±0.2
B
7.7±0.2
W
12.0±0.3
F
E
P1
P2
5.5±0.1 1.75±0.10 8.0±0.1
2.0±0.1
P0
4.0±0.1
D0 Dia.
1.5
+0.1
–0
t1
t2
0.4±0.1 5.25±0.20
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/
4
© Panasonic Corporation 2020
ANCTB38E 201912
Requests to customers
Please refer to "the latest product specifications" when designing your product.
Requests to customers :
https://industrial.panasonic.com/ac/e/salespolicies/
Safety Precautions
When using our products, no matter what sort of equipment they might be used for, be sure to
confirm the applications and environmental conditions with our specifications in advance.
Please contact ..........
Electromechanical Control Business Division
1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8506, Japan
industrial.panasonic.com/ac/e/
©Panasonic Corporation 2020
ANCTB38E 201912
Specifications are subject to change without notice.
很抱歉,暂时无法提供与“EVPASFC1A”相匹配的价格&库存,您可以联系我们找货
免费人工找货