EVPBD6C1A000

Light Touch Switches/EVPBD/0B 6 mm Square Middle Travel 2 terminals SMD Light Touch Switches Type: EVPBD/EVP0B ■ Features ● External dimensions : 6.0 mm×6.0 mm, Height 4.0 mm ● Sharp feeling and silent by metal dome and rubber dome ■ Recommended Applications ● Operating switches for car electronic equipment, car audio systems, etc. ● Steering switches ■ Explanation of Part Numbers 1 2 3 4 0 5 7 B D B Product Code 6 Type C Operating Force 8 9 10 11 12 A 0 0 0 Product Height ■ Specifications Type Snap action/Push-on type SPST Rating 10 μA 2 V DC to 20 mA 15 V DC (Resistive load) Contact Resistance Electrical 500 mΩ max. Insulation Resistance 100 MΩ min. (at 100 V DC) Dielectric Withstanding Voltage 250 V AC for 1 minute Bouncing Mechanical Endurance 10 ms max. (ON, OFF) Operating Force 3.5 N, 7.0 N Travel 0.75 mm, 0.80 mm Operating Life 100,000 cycles min. Operating Temperature –40 °C to +90 °C –40 °C to +90 °C (Bulk) –20 °C to +60 °C (Taping) Storage Temperature Minimum Quantity/Packing Unit 2,000 pcs. Embossed Taping (Reel Pack) 10,000 pcs. Quantity/Carton Note: Non washable Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 2019.07 industrial.panasonic.com/ac/e/ 1 © Panasonic Corporation 2019 ANCTB40E 201907-Fd Light Touch Switches/EVPBD/0B ■ Dimensions in mm (not to scale) EVPBD EVP0B (Embossed Taping) General dimension tolerance : ± 0.2 ( )dimensions are reference dimensions. 4 2.5 A B 1.4 6±0.1 6±0.1 φ3 1±0.3 A B Circuit diagram 7±0.3 8 2- 2 4 Land pattern plan Solder thickness t=0.15±0.03 （5） Part Numbers Operating Force Travel Height Operating Life EVPBD6C1A000 3.5 N 0.75 mm 4.0 mm 100,000 cycles EVP0BDC1A000 7.0 N 0.80 mm 4.0 mm 100,000 cycles Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ 2 © Panasonic Corporation 2019 ANCTB40E 201907-Fd Light Touch Switches/EVPBD/0B ■ Recommended Reflow Soldering Conditions Operation Top (°C) MAX. 260 Fan or Normal Temp. 230 180 150 (Normal Temp.) 90±30 40±10 Soldering Time (s) Reflow temperature may vary by location even in the same reflow condition. Please check the reflow temperature at terminals and at the top of a switch to make sure the both temperatures are withiin the specification. If even one of them is out of the specifi cations, please adjust. ● Embossed Carrier Taping Tape width=12.0 mm (A=12.0 mm) D E H B φG J I A C F t Tape running direction Part No. EVPBD EVP0B Height 4.0 A B 12.0±0.3 1.75±0.10 Taping condition : Lack of products in the middle of taping should be one MAX, but total quantity specified in the specifications should be secured. Peeling off strength of top tape : It should be within 0.2N to 1.0N at 165 degree in peeling off angle. Joint of carrier tape : One joint per one reel may exist. C D E F 5.5±0.1 8.0±0.1 4.0±0.1 2.0±0.1 G 1.5 +0.1 -0 H I J 6.3±0.2 7.5±0.2 4.25±0.20 Unit: mm t 0.4±0.1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ 3 © Panasonic Corporation 2019 ANCTB40E 201907-Fd Requests to customers Please refer to "the latest product specifications" when designing your product. Requests to customers : https://industrial.panasonic.com/ac/e/salespolicies/ Safety Precautions When using our products, no matter what sort of equipment they might be used for, be sure to confirm the applications and environmental conditions with our specifications in advance. Please contact .......... Electromechanical Control Business Division 1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8506, Japan industrial.panasonic.com/ac/e/ ©Panasonic Corporation 2019 ANCTB40E 201907-Fd Specifications are subject to change without notice.