EVQ6P6B40

Light Touch Switches/EVQP6/6P6/7P6/9P6 4 mm Square SMD Light Touch Switches Type: EVQP6/EVQ6P6/EVQ7P6/EVQ9P6 ■ Features ● External dimensions : 4.1 mm× 4.1 mm Height :Without Push Plate 0.35 mm, With Push Plate 0.58 mm :Without Push Plate·With Ground Terminal 0.43 mm ● Long-life :1,000,000 cycles min. (Operating Force 1.0N, 1.6 N Type) ● Dust-proof structure ■ Recommended Applications ● Operating switches for portable electronic equipment (Mobile phones, Camcorders, Portable audio players, etc.). ■ Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 B Product Code Type・Operating Force Product Height ■ Specifications Type Snap action / Push-on type SPST Rating 10 μA 2 V DC to 20 mA 15 V DC (Resistive load) Contact Resistance 500 mΩ max. Insulation Resistance Electrical 50 MΩ min. (at 100V DC) Dielectric Withstanding Voltage Mechanical 100 V AC for 1 minute Bouncing 3 ms max. (ON) 10 ms max. (OFF) Operating Force 1.0 N, 1.6 N, 2.4 N Travel Endurance 0.20 mm (EVQ7P6 : 0.15 mm) 1.0 N, 1.6 N : 1,000,000 cycles min. 2.4 N : 500,000 cycles min. Operating Life Operating Temperature –20 °C to +70 °C Storage Temperature –40 °C to +85 °C (Bulk) –20 °C to +60 °C (Taping) Minimum Quantity/Packing Unit 10,000 pcs. Embossed Taping (Reel Pack) Quantity/Carton 50,000 pcs. Note: Non washable Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately.  LQGXVWULDOSDQDVRQLFFRPDFH 1 © Panasonic Corporation 2019 ANCTB10E 201903-Fd Light Touch Switches/EVQP6/6P6/7P6/9P6 ■ Dimensions in mm (not to scale) General dimension tolerance : ± 0.1 ( )dimensions are reference dimensions. EVQP6D EVQP6P (4.3) 4.1±0.2 0.35 Marking A' B B' (0.6) (1.7) Surface mount For reflow soldering Without push plate A 0.6 2.9 4.1±0.2 A A' B B' Circuit diagram 0.25 (1.6) (3) 4.7 3.7 (1.4) (1.6) A' (5-φ0.4) B (1.4) (2.4) (3.7) PWB land pattern for reference Operating Force 1.6 N 2.4 N Height 0.35 mm 0.35 mm Operating Life 1,000,000 cycles 500,000 cycles General dimension tolerance : ± 0.1 ( )dimensions are reference dimensions. EVQP6L EVQP6Y 0.58 (4.3) 4.1±0.2 4.1±0.2 2.9 0.6 0.43 8 φ1. A' φ2.6 (Embossed Taping) Surface mount For reflow soldering With push plate B' Part of A-A' terminal is exposed at area. Any land pattern or vias shall not be provided at area. Marking varies according to push force. Part Numbers EVQP6DB35 EVQP6PB35 No. 2 A' (0.8) (0.85) A A (0.85) B' (1.4) (1.9) (1.5) (1.5) (1.4) B 2.2 3.6 (Embossed Taping) (1.3) No. 1 A B B' (0 B .8) B' A A' 0.25 Circuit diagram A' 2.2 3.6 B' B (2-1.6) PWB land pattern for reference Any land pattern or vias shall not be provided at area. (1.6) Part Numbers EVQP6LB55 EVQP6YB55 (1.5) (2.6) B' A (2-0.8) (1.4) (1.9) B A' A (0.85) (1.5) (5-φ0.4) (1.5) (1.4) 4.7 3.7 (3.7) (2.4) (1.4) Operating Force 1.6 N 2.4 N Height 0.58 mm 0.58 mm Operating Life 1,000,000 cycles 500,000 cycles Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ 2 © Panasonic Corporation 2019 ANCTB10E 201903-Fd Light Touch Switches/EVQP6/6P6/7P6/9P6 ■ Dimensions in mm (not to scale) No. 3 General dimension tolerance : ± 0.1 ( )dimensions are reference dimensions. EVQ7P6 EVQ6P6 EVQ9P6 (4.3) 4.1±0.2 (0.5) (2.2) A A' B B' φ2.6 0.25 B B' A A' Circuit diagram 0.43 0.38 –0.1 +0.15 4.7 3.7 0.7 (3.7) (2.4) (1.4) (5-φ0.4) (0.8) B' (1.4) (1.9) B' A A' (1.6) PWB land pattern for reference Part of B-B' terminal is exposed at area. Any land pattern or vias shall not be provided at area. (0.85) (1.5) (1.4) (1.5) B B A' 2.2 3.6 A Operation point 2.35 2.05 GND (0.75) (1.3) Surface mount For reflow soldering Without push plate With Ground Terminal 4.1±0.2 2.9 0.6 (Embossed Taping) (1.6) Part Numbers Operating Force Height Operating Life EVQ7P6B40 1.0 N 0.43 mm 1,000,000 cycles EVQ6P6B40 1.6 N 0.43 mm 1,000,000 cycles EVQ9P6B40 2.4 N 0.43 mm 500,000 cycles Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ 3 © Panasonic Corporation 2019 ANCTB10E 201903-Fd Light Touch Switches/EVQP6/6P6/7P6/9P6 ■ Recommended Reflow Soldering Conditions Operation Top (°C) MAX. 260 Fan or Normal Temp. 230 180 150 (Normal Temp.) 90±30 40±10 Soldering Time (s) ● Embossed Carrier Taping Tape width=12.0 mm t1 Feeding hole Chip pocket P 2 P0 E φD0 B t2 Taping condition : Lack of products in the middle of taping should be one MAX, but total quantity specified in the specifications should be secured. Peeling off strength of top tape : It should be within 0.2N to 1.0N at 165 degree in peeling off angle. Joint of carrier tape : One joint per one reel may exist. F W A P1 Chip component Tape running direction Unit: mm Part No. Height EVQP6 0.35/0.58 EVQ6P6 EVQ7P6 EVQ9P6 0.43 A B W 4.0±0.2 5.0±0.2 12.0 –0.1 +0.3 F E P1 P2 P0 D0 Dia. 5.5±0.1 1.75±0.10 8.0±0.1 2.0±0.1 4.0±0.1 1.5 –0 ■ Recommended Shape of Test Pole Without Push Plate +0.1 t1 t2 +0.2 0.30±0.05 0.5/0.7 –0.1 ■ Recommended Operating Conditions Without Push Plate With Push Plate With Push Plate 0.3 mm max. φ0.8 1.3 φ1.5 Test pole R0.1±0.05 Leaning angle range 90 °±4 ° (vertical direction) Switch R0.1±0.05 R0.1±0.05 Mounting surface Slant 0.3 mm max. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ 4 © Panasonic Corporation 2019 ANCTB10E 201903-Fd Requests to customers Please refer to "the latest product specifications" when designing your product. Requests to customers : https://industrial.panasonic.com/ac/e/salespolicies/ Safety Precautions When using our products, no matter what sort of equipment they might be used for, be sure to confirm the applications and environmental conditions with our specifications in advance. Please contact .......... Electromechanical Control Business Division 1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8506, Japan industrial.panasonic.com/ac/e/ ©Panasonic Corporation 2019 ANCTB10E-1 201903-Fd Specifications are subject to change without notice.