EVQP42B3M

Light Touch Switches/EVQP4 6.2 mm×2.5 mm Side-operational Edge Mount Light Touch Switches Type: EVQP4 ■ Features ● External dimensions : 6.2 mm× 2.55 mm (Excluding the push plate), Height 3.5 mm (Printed circuit board being as low as 1.35 mm) ● Side-operational Middle Travel ( 0.7 mm ) with a high operating force (5.0 N) ● Improved soldering strength in the operating direction when mounted on PC board edge ■ Recommended Applications ● Operation switches for portable electronic equipment (Mobile phones, Digital still cameras, Camcorders Portable audio players, etc.) ● Keyless entry (car electronics) ● Car audio equipment ■ Explanation of Part Numbers 1 2 3 Product Code 4 5 6 7 8 B 3 Operating Force Type 9 Push Plate Color ■ Specifications Travel Type Middle Travel Type Short Travel Snap action / Push-on type SPST Rating 10 μA 2 V DC to 20 mA 15 V DC (Resistive load) Contact Resistance 100 mΩ max. Insulation Resistance Electrical 100 MΩ min. (at 100 V DC) Dielectric Withstanding Voltage 250 V AC for 1 minute Bouncing Operating Force Mechanical 10 ms max. (ON, OFF) 2.5 N, 3.5 N, 5.0 N Travel 0.70 mm±0.2 mm Push Strength Endurance Operating Life 1.0 N, 1.6 N, 2.4 N, 3.5 N 0.25 mm +0.05 –0.15 mm 50 N (1 minute) 2.5 N:1,000,000 cycles min. 3.5 N: 500,000 cycles min. 5.0 N: 200,000 cycles min. Operating Temperature 1.0 N, 1.6 N: 1,000,000 cycles min. 2.4 N: 500,000 cycles min. 3.5 N: 200,000 cycles min. –40 °C to +85 °C –40 °C to +85 °C (Bulk) –20 °C to +60 °C (Taping) Storage Temperature Minimum Quantity/Packing Unit 2,500 pcs. Embossed Taping (Reel Pack) Quantity/Carton 12,500 pcs. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately.  LQGXVWULDOSDQDVRQLFFRPDFH 1 © Panasonic Corporation 2019 ANCTB27E 201903-Fd Light Touch Switches/EVQP4 ■ Dimensions in mm (not to scale) No. 1 General dimension tolerance : ± 0.2 ( )dimensions are reference dimensions. 2.7±0.1 2.55 EVQP4 Middle travel 2 1 6.0±0.1 2 P.W.B. 3 _0.1 2.5 +0.2 5.7±0.1 _0 6.2 +0.4 2 4 _0 5.1+0.1 x. ma .5 0.05 max. 0 0.3 max. R 5.8±0.1 7.0±0.1 1.65±0.1 1.25±0.1 0.45±0.1 _0.1 3.4 +0.2 4.8±0.1 3.1±0.1 1 0.3 max. 0.1 max. 0.4±0.2 1.35±0.1 _0.1 3.5 +0.2 4 3.1±0.1 1 3 2.05±0.1 φ 1. 8 Circuit diagram PWB land pattern for reference ＊ Height from surface of PCB : 1.35 mm Part Numbers Operating Force Height Push Plate Color Operating Life EVQP4HB3B 2.5 N 3.5 mm Blue 1,000,000 cycles EVQP4KB3Q 3.5 N 3.5 mm Gray 500,000 cycles EVQP4MB3K 5.0 N 3.5 mm Black 200,000 cycles No. 2 General dimension tolerance : ± 0.2 ( )dimensions are reference dimensions. 2.7±0.1 EVQP4 2 1 2.55 Short travel φ2 Circuit diagram 1 6.0±0.1 P.W.B. 2 2 3 4 _0 5.1+0.1 x. ma 0.05 max. .5 0 0.3 max. R 5.8±0.1 7.0±0.1 1.65±0.1 1.25±0.1 0.45±0.1 +0.2 3.0 _0.1 +0.2 2.1 _0.1 2.6 4.8±0.1 5.7±0.1 _0 6.2 +0.4 3.1±0.1 3.1±0.1 2.05±0.1 1 0.3 max. 0.1 max. 1.35±0.1 _0.1 3.5 +0.2 0.4±0.2 4 1.6 3 PWB land pattern for reference ＊ Height from surface of PCB : 1.35 mm Part Numbers Operating Force Height Push Plate Color Operating Life EVQP40B3M 1.0 N 3.5 mm Natural 1,000,000 cycles EVQP42B3M 1.6 N 3.5 mm Natural 1,000,000 cycles EVQP44B3M 2.4 N 3.5 mm Natural 500,000 cycles EVQP46B3M 3.5 N 3.5 mm Natural 200,000 cycles Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ 2 © Panasonic Corporation 2019 ANCTB27E 201903-Fd Light Touch Switches/EVQP4 ■ Recommended Reflow Soldering Conditions Operation Top (°C) MAX. 260 Fan or Normal Temp. 230 180 150 (Normal Temp.) 90±30 40±10 Soldering Time (s) ● Embossed Carrier Taping Tape width=12.0 mm t1 Feeding hole Chip pocket P2 P0 E φD0 B t2 Chip component Taping condition : Lack of products in the middle of taping should be one MAX, but total quantity specified in the specifications should be secured. Peeling off strength of top tape : It should be within 0.2N to 1.0N at 165 degree in peeling off angle. Joint of carrier tape : One joint per one reel may exist. F W A P1 Tape running direction Unit: mm Part No. EVQP4 Height 3.5 A 6.5±0.2 B 3.9±0.2 W 12.0±0.3 F E 5.5±0.1 1.75±0.10 P1 8.0±0.1 P2 2.0±0.1 P0 4.0±0.1 D0 Dia. 1.5 +0.1 –0 t1 t2 0.4±0.1 3.75±0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ 3 © Panasonic Corporation 2019 ANCTB27E 201903-Fd Requests to customers Please refer to "the latest product specifications" when designing your product. Requests to customers : https://industrial.panasonic.com/ac/e/salespolicies/ Safety Precautions When using our products, no matter what sort of equipment they might be used for, be sure to confirm the applications and environmental conditions with our specifications in advance. Please contact .......... Electromechanical Control Business Division 1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8506, Japan industrial.panasonic.com/ac/e/ ©Panasonic Corporation 2019 ANCTB27E-1 201903-Fd Specifications are subject to change without notice.