EVQP9H02M

Light Touch Switches/EVQP2/P9/3P2 4.7 mm×3.5 mm SMD Light Touch Switches Type: EVQP2/EVQP9/EVQ3P2 ■ Features ● External dimensions : 4.7 mm×3.5 mm, Height : Middle Push Travel 2.5 mm Short Push Travel 2.1 mm, 2.5 mm ● High operating force and long operational life ● High mountability with J-bent (4 terminals) ■ Recommended Applications ● Operation switches for portable electronic equipment (Mobile phones, Digital still cameras, Camcorders, Portable audio players, etc.) ● Keyless entry systems (automotive) ● Car audio equipment ■ Explanation of Part Numbers 1 2 3 Product Code 4 5 6 Type Operating Force 7 8 9 Product Height and Push Plate Color ■ Specifications Travel Type Middle Push Travel Type Short Push Travel Snap action / Push-on V DC type SPST Rating 10 μA 2 V DC to 20 mA 15 V DC (Resistive load) Contact Resistance Electrical 100 mΩ max. Insulation Resistance 100 MΩ min. (at 100 V DC) Dielectric Withstanding Voltage 250 V AC (1 minute) Bouncing Mechanical Endurance 10 ms max. (ON, OFF) Operating Force 2.5 N, 3.5 N, 5.0 N 1.0 N, 1.6 N, 2.4 N, 3.5 N, 4.0 N, 5.0 N Travel 0.70 mm±0.20 mm 0.25 mm –0.15 mm Operating Life +0.05 2.5 N:1,000,000 cycles min. 3.5 N: 500,000 cycles min. 5.0 N: 200,000 cycles min. Operating Temperature 1.0 N, 1.6 2.4 3.5 4.0 5.0 N: 1,000,000 N: 500,000 N: 200,000 N: 200,000 N: 200,000 cycles cycles cycles cycles cycles min. min. min. min. min. –40 °C to +85 °C –40 °C to +85 °C (Bulk) –20 °C to +60 °C (Taping) Storage Temperature Minimum Quantity/Packing Unit 4,000 pcs. Embossed Taping (Reel Pack) Quantity/Carton 20,000 pcs. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately.  LQGXVWULDOSDQDVRQLFFRPDFH 1 © Panasonic Corporation 2019 ANCTB19E 201903-Fd Light Touch Switches/EVQP2/P9/3P2 ■ Dimensions in mm (not to scale) No. 1 EVQP2 EVQ3P2 Middle push travel With J-bent terminals Without Ground Terminal (General dimension tolerance±0.2) 2.5 +0.2 –0.1 0.6 +0 5.5 –0.3 4.7±0.1 φ1 .8 1.65±0.1 3.5±0.1 Circuit diagram 1.7±0.1 6.6±0.1 3.7±0.1 0.6±0.1 0.7±0.1 2.7±0.1 PWB land pattern for reference Part Numbers Ground Terminal Operating Force Height Push Plate Color Operating Life EVQP2H02B Without 2.5 N 2.5 mm Blue 1,000,000 cycles EVQP2K02Q Without 3.5 N 2.5 mm Gray 500,000 cycles EVQ3P202K Without 5.0 N 2.5 mm Black 200,000 cycles Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ 2 © Panasonic Corporation 2019 ANCTB19E 201903-Fd Light Touch Switches/EVQP2/P9/3P2 ■ Dimensions in mm (not to scale) No. 2 EVQP2 EVQ3P2 (General dimension tolerance : ± 0.2) 0.55 Middle push travel With J-bent terminals With Ground Terminal Ground terminal 2.5 +0.2 –0.1 0.6 +0 4.7±0.1 5.5 –0.3 φ1 .8 1.65±0.1 Circuit diagram 1.4±0.1 3.5±0.1 1.7±0.1 0.6±0.1 3.7±0.1 1 6.6±0.1 1.7±0.1 2.35±0.1 GND 0.3 0.7±0.1 2.7±0.1 Land pattern plan We recommend to connect the GND land shown in the switch spec. with the GND of your P.C.B for withstanding electric-static discharge. Part Numbers Ground Terminal Operating Force Height Push Plate Color Operating Life EVQP2B02B With 2.5 N 2.5 mm Blue 1,000,000 cycles EVQP2D02Q With 3.5 N 2.5 mm Gray 500,000 cycles EVQP2F02K With 5.0 N 2.5 mm Black 200,000 cycles Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ 3 © Panasonic Corporation 2019 ANCTB19E 201903-Fd Light Touch Switches/EVQP2/P9/3P2 ■ Dimensions in mm (not to scale) No. 3 EVQP2 EVQP9 (General dimension tolerance±0.2) 1.6 Short push travel With J-bent terminals Without Ground Terminal H 0.6 +0 5.5 –0.3 2.6 4.7±0.1 φ2 Circuit diagram 1.65±0.1 3.5±0.1 1.6 6.6±0.1 3.7±0.1 0.6±0.1 0.55 1.7±0.1 Ground terminal 0.7±0.1 2.7±0.1 PWB land pattern for reference Part Numbers Ground Terminal Operating Force H=Height Push Plate Color Operating Life EVQP2002M Without 1.0 N 2.1 mm White 1,000,000 cycles EVQP2002W Without 1.0 N 2.5 mm White 1,000,000 cycles EVQP2202M Without 1.6 N 2.1 mm White 1,000,000 cycles EVQP2202W Without 1.6 N 2.5 mm White 1,000,000 cycles EVQP2402M Without 2.4 N 2.1 mm White 500,000 cycles EVQP2402W Without 2.4 N 2.5 mm White 500,000 cycles EVQP2602M Without 3.5 N 2.1 mm White 200,000 cycles EVQP2602W Without 3.5 N 2.5 mm White 200,000 cycles EVQP9W02M Without 4.0 N 2.1 mm White 200,000 cycles EVQP9W02W Without 4.0 N 2.5 mm White 200,000 cycles EVQP9P02M Without 5.0 N 2.1 mm White 200,000 cycles EVQP9P02W Without 5.0 N 2.5 mm White 200,000 cycles Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ 4 © Panasonic Corporation 2019 ANCTB19E 201903-Fd Light Touch Switches/EVQP2/P9/3P2 ■ Dimensions in mm (not to scale) No. 4 Short push travel With J-bent terminals With Ground Terminal (General dimension tolerance±0.2) 0.55 EVQP2 EVQP9 1.6 Ground terminal H 0.6 +0 5.5 –0.3 2.6 4.7±0.1 φ2 Circuit diagram 1.4±0.1 1.65±0.1 3.5±0.1 1.7±0.1 0.6±0.1 3.7±0.1 1 6.6±0.1 1.7±0.1 2.35±0.1 GND 0.3 0.7±0.1 2.7±0.1 Land pattern plan We recommend to connect the GND land shown in the switch spec. with the GND of your P.C.B for withstanding electric-static discharge. Part Numbers Ground Terminal Operating Force H=Height Push Plate Color Operating Life EVQP2P02M With 1.0 N 2.1 mm White 1,000,000 cycles EVQP2P02W With 1.0 N 2.5 mm White 1,000,000 cycles EVQP2R02M With 1.6 N 2.1 mm White 1,000,000 cycles EVQP2R02W With 1.6 N 2.5 mm White 1,000,000 cycles EVQP2T02M With 2.4 N 2.1 mm White 500,000 cycles EVQP2T02W With 2.4 N 2.5 mm White 500,000 cycles EVQP2V02M With 3.5 N 2.1 mm White 200,000 cycles EVQP2V02W With 3.5 N 2.5 mm White 200,000 cycles EVQP9102M With 4.0 N 2.1 mm White 200,000 cycles EVQP9102W With 4.0 N 2.5 mm White 200,000 cycles EVQP9H02M With 5.0 N 2.1 mm White 200,000 cycles EVQP9H02W With 5.0 N 2.5 mm White 200,000 cycles Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ 5 © Panasonic Corporation 2019 ANCTB19E 201903-Fd Light Touch Switches/EVQP2/P9/3P2 ■ Recommended Reflow Soldering Conditions Fan or Normal Temp. Tape width=12.0 mm 230 180 t1 Feeding hole φD0 Chip pocket P2 P0 E 150 F W A B Operation Top (°C) MAX. 260 ● Embossed Carrier Taping (Normal Temp.) t2 90±30 P1 Chip component Tape running direction 40±10 Taping condition : Lack of products in the middle of taping should be one MAX, but total quantity specified in the specifications should be secured. Peeling off strength of top tape : It should be within 0.2N to 1. ON at 165 degree in peeling off angle. Joint of carrier tape : One joint per one reel may exist. Soldering Time (s) Unit: mm Part No. Height A B W EVQP2 EVQP9 EVQ3P2 2.1 2.5 6.0±0.2 4.7±0.2 12.0±0.3 F E 5.5±0.1 1.75±0.10 8.0±0.1 ■ Recommended Shape of Test Pole Middle Push Travel Type P1 P2 P0 D 0 Dia 2.0±0.1 4.0±0.1 1.5 –0 t2 0.3±0.1 2.7±0.2 ■ Recommended Operating Conditions Short Push Travel Type 0.3 mm max. Test pole φ3.0 +0.1 t1 φ3.3 toφ3.7 Leaning angle range 90 ˚±4 ˚ (vertical direction) Switch Mounting surface Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ 6 © Panasonic Corporation 2019 ANCTB19E 201903-Fd Requests to customers Please refer to "the latest product specifications" when designing your product. Requests to customers : https://industrial.panasonic.com/ac/e/salespolicies/ Safety Precautions When using our products, no matter what sort of equipment they might be used for, be sure to confirm the applications and environmental conditions with our specifications in advance. Please contact .......... Electromechanical Control Business Division 1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8506, Japan industrial.panasonic.com/ac/e/ ©Panasonic Corporation 2019 ANCTB19E-2 201903-Fd Specifications are subject to change without notice.