EVQQ2K01W

Light Touch Switches/EVQP0/Q2/6Q2/7Q2 6 mm Square Thin Type SMD Light Touch Switches Type: EVQP0 EVQQ2 EVQ6Q2 EVQ7Q2 ■ Features ● External dimensions : 6.5 mm× 6.0 mm, Height 1.8 mm (Excluding the push plate) ● With or without ground terminal, height, operating force ● Overstroke travel ■ Recommended Applications ● Operating switches for other electronic equipment ● Operation switches for PC mouse ● Car audio systems ● Game ■ Explanation of Part Numbers 1 2 3 4 P Q 6 Product Code 5 6 7 8 9 0/2 Q 7 Type Operating Force Ground Terminal Product Height Push Plate Color ■ Specifications Travel Type Type Electrical Short Push Travel Overstroke Travel Snap action/Push-on type SPST 10 μA 2 V DC to 20 mA 15 V DC (Resistive load) 100 mΩ max. 100 MΩ min. (at 100 V DC) 250 V AC for 1 minute 10 ms max. (ON, OFF) 0.5 N, 0.8 N,1.0 N, 1.3 N, 0.6 N, 1.0 N 1.6 N, 2.6 N, 3.5 N Rating Contact Resistance Insulation Resistance Dielectric Withstanding Voltage Bouncing Operating Force Mechanical Travel Endurance Operating Life Operating Temperature Storage Temperature Minimum Quantity/Packing Unit Quantity/Carton 0.5 N, 0.8 N, 1.0 N 0.2mm 0.30 mm 1.3 N, 1.6 N, 2.6 N, 3.5 N 0.25mm 0.5 N, 0.8 N : 2,000,000 cycles min. 1.0 N, 1.3 N, 1.6 N : 1,000,000 cycles min. 0.6 N : 2,000,000 cycles min. 2.6 N : 200,000 cycles min. 1.0 N : 1,000,000 cycles min. 3.5 N : 100,000 cycles min. –40 °C to +85 °C –40 °C to +85 °C (Bulk) –20 °C to +60 °C (Taping) H=2.0 mm 4,000 pcs. Embossed Taping (Reel Pack) H=2.5 mm, 3.1 mm 2,000 pcs. Embossed Taping (Reel Pack) H=2.0 mm 20,000 pcs. H=2.5 mm, 3.1 mm 10,000 pcs. Note: Non washable Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately.  LQGXVWULDOSDQDVRQLFFRPDFH 1 © Panasonic Corporation 2019 ANCTB12E 201903-Fd Light Touch Switches/EVQP0/Q2/6Q2/7Q2 ■ Dimensions in mm (not to scale) No. 1 EVQP0 (General dimension tolerance : ± 0.2) ( )dimensions are reference dimensions. Overstroke travel With J-bent terminals Without Ground Terminal φ3 6.5 B' A A' 0.8 4.0 6.0 B (6.6) B B' A A' 4.0 (0.8) 1 min. 1.8 H φ2 (3.2) Circuit Diagram Part Numbers (3.6) (3.2) PWB land pattern for reference Operating Force H=Height Push Plate Color Ground Terminal Operating Life EVQP0N02B 0.6 N 2.5 mm Blue Without 2,000,000 cycles EVQP0Q02Q 1.0 N 2.5 mm Gray Without 1,000,000 cycles No. 2 (General dimension tolerance : ± 0.2) ( )dimensions are reference dimensions. EVQP0 Overstroke travel With J-bent terminals With Ground Terminal (5.1) (4.4) (3.9) 6.5 Ⓐ B B' (3.6) 0.8 4.0 6.0 φ3 A' A Operating part φ2 0.05±0.1 Ⓑ Ground terminal 1 min. 3.3 (6.6) (0.8) 1.8 H The shape of the mounting base is either Ⓐ or Ⓑ. 1 min. B' A A' 1 min. 4.0 B (3.3) Circuit Diagram (3.2) (3.6) (3.2) PWB land pattern for reference Part Numbers Operating Force H=Height Push Plate Color Ground Terminal Operating Life EVQP0P02B 0.6 N 2.5 mm Blue With 2,000,000 cycles EVQP0S02Q 1.0 N 2.5 mm Gray With 1,000,000 cycles Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ 2 © Panasonic Corporation 2019 ANCTB12E 201903-Fd Light Touch Switches/EVQP0/Q2/6Q2/7Q2 ■ Dimensions in mm (not to scale) No. 3 EVQQ2/6Q2 (General dimension tolerance : ± 0.2) ( )dimensions are reference dimensions. 6.5 φ3.8 B B' A A' 0.8 4.0 6.0 Short travel With J-bent terminals Without Ground Terminal 1 min. B B' A A' 4.0 (0.8) (6.6) H 1.8 φ3 (3.2) Circuit Diagram Part Numbers EVQQ2B01W EVQQ2B02W EVQQ2B03W EVQ6Q201W EVQ6Q202W EVQ6Q203W EVQQ2F01W EVQQ2F02W EVQQ2F03W EVQQ2K01W EVQQ2K02W EVQQ2K03W EVQQ2P01W EVQQ2P02W EVQQ2P03W EVQQ2U01W EVQQ2U02W EVQQ2U03W EVQQ2Y01W EVQQ2Y02W EVQQ2Y03W Operating Force 0.5 N 0.5 N 0.5 N 0.8 N 0.8 N 0.8 N 1.0 N 1.0 N 1.0 N 1.3 N 1.3 N 1.3 N 1.6 N 1.6 N 1.6 N 2.6 N 2.6 N 2.6 N 3.5 N 3.5 N 3.5 N (3.6) (3.2) PWB land pattern for reference H=Height 2.0 mm 2.5 mm 3.1 mm 2.0 mm 2.5 mm 3.1 mm 2.0 mm 2.5 mm 3.1 mm 2.0 mm 2.5 mm 3.1 mm 2.0 mm 2.5 mm 3.1 mm 2.0 mm 2.5 mm 3.1 mm 2.0 mm 2.5 mm 3.1 mm Push Plate Color Ground Terminal White Without White Without White Without White Without White Without White Without White Without White Without White Without White Without White Without White Without White Without White Without White Without White Without White Without White Without White Without White Without White Without Operating Life 2,000,000 cycles 2,000,000 cycles 2,000,000 cycles 2,000,000 cycles 2,000,000 cycles 2,000,000 cycles 1,000,000 cycles 1,000,000 cycles 1,000,000 cycles 1,000,000 cycles 1,000,000 cycles 1,000,000 cycles 1,000,000 cycles 1,000,000 cycles 1,000,000 cycles 200,000 cycles 200,000 cycles 200,000 cycles 100,000 cycles 100,000 cycles 100,000 cycles Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ 3 © Panasonic Corporation 2019 ANCTB12E 201903-Fd Light Touch Switches/EVQP0/Q2/6Q2/7Q2 ■ Dimensions in mm (not to scale) No. 4 (General dimension tolerance : ± 0.2) ( )dimensions are reference dimensions. EVQQ2/7Q2 Short travel With J-bent terminals With Ground Terminal (5.1) (4.4) (3.9) 6.5 φ3.8 Ⓐ B (3.6) 0.8 4.0 6.0 B' A' A Operating part φ3 0.05±0.1 Ⓑ Ground terminal 1 min. 3.3 (6.6) (0.8) 1.8 H The shape of the mounting base is either Ⓐ or Ⓑ. 1 min. B' A A' Circuit Diagram 1 min. 4.0 B (3.3) (3.2) (3.6) (3.2) PWB land pattern for reference Part Numbers EVQQ2D01W EVQQ2D02W EVQQ2D03W EVQ7Q201W EVQ7Q202W EVQ7Q203W EVQQ2H01W EVQQ2H02W EVQQ2H03W EVQQ2M01W EVQQ2M02W EVQQ2M03W EVQQ2S01W EVQQ2S02W EVQQ2S03W EVQQ2W01W EVQQ2W02W EVQQ2W03W EVQQ2201W EVQQ2202W EVQQ2203W Operating Force 0.5 N 0.5 N 0.5 N 0.8 N 0.8 N 0.8 N 1.0 N 1.0 N 1.0 N 1.3 N 1.3 N 1.3 N 1.6 N 1.6 N 1.6 N 2.6 N 2.6 N 2.6 N 3.5 N 3.5 N 3.5 N H=Height 2.0 mm 2.5 mm 3.1 mm 2.0 mm 2.5 mm 3.1 mm 2.0 mm 2.5 mm 3.1 mm 2.0 mm 2.5 mm 3.1 mm 2.0 mm 2.5 mm 3.1 mm 2.0 mm 2.5 mm 3.1 mm 2.0 mm 2.5 mm 3.1 mm Push Plate Color Ground Terminal With White With White With White With White With White With White With White With White With White With White With White With White With White With White With White With White With White With White With White With White With White Operating Life 2,000,000 cycles 2,000,000 cycles 2,000,000 cycles 2,000,000 cycles 2,000,000 cycles 2,000,000 cycles 1,000,000 cycles 1,000,000 cycles 1,000,000 cycles 1,000,000 cycles 1,000,000 cycles 1,000,000 cycles 1,000,000 cycles 1,000,000 cycles 1,000,000 cycles 200,000 cycles 200,000 cycles 200,000 cycles 100,000 cycles 100,000 cycles 100,000 cycles Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ 4 © Panasonic Corporation 2019 ANCTB12E 201903-Fd Light Touch Switches/EVQP0/Q2/6Q2/7Q2 ■ Recommended Reflow Soldering Conditions ● Embossed Carrier Taping Fan or Normal Temp. Tape width=12.0 mm 230 180 Feeding hole t1 φD0 Chip pocket P2 P0 E 150 F W A B Operation Top (°C) MAX. 260 t2 (Normal Temp.) 90±30 40±10 P1 Chip component Tape running direction Taping condition : Lack of products in the middle of taping should be one MAX, but total quantity specified in the specifications should be secured. Peeling off strength of top tape : It should be within 0.2N to 1. ON at 165 degree in peeling off angle. Joint of carrier tape : One joint per one reel may exist. Soldering Time (s) Unit: mm Part No. Height EVQQ2 EVQ6Q2 EVQ7Q2 2.0 2.5/3.1 EVQP0 2.5 A B W 6.7±0.2 7.4±0.2 12.0±0.3 F E P2 P0 D0 Dia 2.0±0.1 4.0±0.1 1.5+0.1 ‒0 t1 t2 2.2±0.2 5.5±0.1 1.75±0.10 8.0±0.1 0.30±0.05 3.2±0.2 2.8±0.2 ■ Recommended Shape of Test Pole 2 mm Type P1 ■ Recommended Operating Conditions 2.5 mm, 3.1 mm Type 0.3 mm max. φ3 +0 –0.5 φ4 +0.5 –0 Test pole Leaning angle range 90 °±4 ° (vertical direction) Switch R0.1 mm±0.05 mm R0.1 mm±0.05 mm Mounting surface Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ 5 © Panasonic Corporation 2019 ANCTB12E 201903-Fd Requests to customers Please refer to "the latest product specifications" when designing your product. Requests to customers : https://industrial.panasonic.com/ac/e/salespolicies/ Safety Precautions When using our products, no matter what sort of equipment they might be used for, be sure to confirm the applications and environmental conditions with our specifications in advance. Please contact .......... Electromechanical Control Business Division 1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8506, Japan industrial.panasonic.com/ac/e/ ©Panasonic Corporation 2019 ANCTB12E-3 201903-Fd Specifications are subject to change without notice.