EWA-NF0C15ABR

Slide Potentiometers/EWAK/M/N/P/Q Japan Malaysia Standard Type Slide Potentiometers Type: EWAK/EWAM/EWAN EWAP/EWAQ ■ Features ● Compact size and wave-soldering available ● A large variety: 15.0, 20.0, 30.0, 45.0 and 60.0 mm travel ■ Recommended Applications ● ● ● ● Audio Equipment Video Equipment Home Electrical Appliances Electronic Musical Instruments ■ Explanation of Part Numbers 1 2 3 E W A 4 Product Code 5 6 7 Specifications 8 9 Lever Trims & Dimensions 10 11 12 Taper & Resistance ■ Product Chart Classification Travel Single/Dual Standard part numbers Metal lever Single Dual Single Dual Single Dual Single Dual Single Dual EWAKF EWAKA EWAMF EWAMA EWANF EWANA EWAPF EWAPA EWAQF EWAQA 쑗 쑗 쑗 쑗 쑗 쑗 쑗 쑗 쑗 쑗 15.0 mm 20.0 mm 30.0 mm 45.0 mm 60.0 mm Functions Mounting Midpoint screw hole detent 쑗 쑗 쑗 쑗 쑗 쑗 쑗 쑗 쑗 쑗 쑗 쑗 쑗 쑗 쑗 쑗 쑗 쑗 쑗 쑗 Midpoint tap 쑗 쑗 쑗 쑗 쑗 쑗 쑗 쑗 쑗 쑗 Notes: 1. Standard part numbers are insulated lever types. 2. 쑗 =available ■ Minimum Quantity/Packing Unit EWAK EWAM Minimum Quantity/ Packing Unit EWAN EWAP EWAQ EWAK EWAM Quantity/Carton EWAN EWAP EWAQ 100 100 50 100 50 50 25 1000 1000 500 1000 500 500 250 pcs. pcs. pcs. pcs. pcs. pcs. pcs. pcs. pcs. pcs. pcs. pcs. pcs. pcs. (Tray (Tray (Tray (Tray (Tray (Tray (Tray Pack) Pack) Pack) Pack) Pack) Pack) Pack) Lever length < 20.0 mm Lever length > 21.0 mm Lever length < 20.0 mm Lever length > 21.0 mm Lever length < 20.0 mm Lever length > 21.0 mm Lever length < 20.0 mm Lever length > 21.0 mm Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Nov. 2005 Slide Potentiometers/EWAK/M/N/P/Q ■ Specifications ● Electrical Specifications 1. Power Rating Maximum load which can be continuously applied under 50 °C, is per following chart. For potentiometers operated in ambient temperatures above 50 °C, Power Rating shall be derated in accordance with the figure below. Type 15.0 mm 20.0 mm 30.0 mm 45.0 mm 60.0 mm EWAKF EWAKA EWAMF EWAMA EWANF EWANA EWAPF EWAPA EWAQF EWAQA Power Max. operating voltage Power Max. operating voltage Power Max. operating voltage B 0.03 W 75 V 0.04 W 150 V 0.06 W A, C, D, G 0.02 W 75 V 0.02 W 150 V 0.03 W Rating Taper Power Max. operating voltage Power Max. operating voltage 150 V 0.10 W 150 V 0.05 W 200 V 0.12 W 200 V 150 V 0.06 W 200 V 2. Residual Resistance The minimum resistance at each end of sliding position is the residual resistance (hop-off) (see Chart 1). The minimum resistance at tap position between tap terminal and contactor is the tap residual resistance (See Chart 2.). Chart 1. Residual Resistance Taper Terminal Total Resistance Travel R < 50k
A, C, D B, G 1 to 2 2 to 3 – – 1 to 2 2 to 3 15.0 mm 20.0 mm 30.0 mm 45.0 mm 60.0 mm 15.0 mm 20.0 mm 30.0 mm 45.0 mm 60.0 mm 3
max. 25
max. 10
max. 10
max. 15
max. 20
max. 25
max. 10
max. 10
max. 15
max. 20
max. 25
max. General R> 50 k
25
max. 50
max. (For tone) R 250k
100
max. 100
max. 100
max. 100
max. 3
max. 25
max. 3
max. 25
max. R> 50 k
5
max. 50
max. R 250k
50
max. 100
max. 50
max. 100
max. Standard R < 50k
For volume R < 50k
With LED & for dc use 10
max. 60
max. 25
max. 35
max. 50
max. 60
max. 25
max. 35
max. 50
max. 60
max. R> 50 k
60
max. 100
max. R 250k
100
max. 100
max. 100
max. 100
max. Chart 2. Tap Residual Resistance Total resistance Residual resistance R < 50 k
100
max. 50 k