EX-Z12FA-P

Amplifier Built-in Ultra-minute Photoelectric Sensor EX-Z SERIES Conforming to EMC Directive No. 1 The World’s in Compactness * Among photoelectric sensors with built-in amplifier, as of June 2015 (survey by our company) (Actual size) 2015.07 panasonic.net/id/pidsx/global Recognition EX-Z SERIES Ultra-minute Photoelectric Sensor Amplifier Built-in The World’s Smallest Size * * Among photoelectric sensors with built-in amplifier, as of June 2015 (survey by our company) Unit volume ratio reduced by about 50%* * As compared to EX-10 series The world’s thinnest* sensor dimension of 3 mm 0.118 in has been achieved by utilizing new semiconductor packaging technology that does not use wire bonding. The small unit size allows installation of sensors in a narrow space where only a conventional fiber sensor head could be installed before. The built-in amplifier also saves on installation space. * Among photoelectric sensors with built-in amplifier, as of June 2015 (survey by our company) EX-Z13□ Sensing range: 500 mm 19.685 in Repeatability: 0.05 mm 0.002 in or less Minimum sensing object: ø1.0 mm ø0.039 in opaque object Front sensing type Approx. 50% smaller in volume ratio than EX-10 EX-Z1□F□ W8 × H14 × D3 mm W0.315 × H0.551 × D0.118 in Side sensing type Approx. 35% smaller EX-Z12□ Sensing range: 200 mm 7.874 in Repeatability: 0.03 mm 0.001 in or less Minimum sensing object: ø0.5 mm ø0.020 in opaque object in volume ratio than EX-10 EX-Z11□ EX-Z1□ Sensing range: 50 mm 1.969 in Repeatability: 0.02 mm 0.001 in or less Minimum sensing object: ø0.3 mm ø0.012 in opaque object W5.5 × H15.9 × D6.5 mm W0.217 × H0.626 × D0.256 in Small-object sensing capability Capable of sensing an extremely small ø0.3 mm ø0.012 in object without slit EX-Z11□ A slit is provided on the front side of the main sensor body. The sensor can detect a ø0.3 mm ø0.012 in object (the smallest-object sensing capability in the industry*) without using an optional slit. * Among photoelectric sensors with built-in amplifier, as of June 2015 (survey by our company) Capability to sense a small ø1.0 mm ø0.039 in object over long distance EX-Z13□ The high-brightness 4-element red LED provides strong light emission stably over a long period of time. In spite of the extremely small size, both front sensing and side sensing units can sense a small ø1.0 mm ø0.039 in object from a long distance of 500 mm 19.685 in. Since the spotlight is clearly visible, the sensing position can be easily confirmed. Clearly visible spotlight Built-in slit EX-Z11□ Slit diameter: 0.3 mm 0.012 in 2 Sensing of end of thin pipe A wide range of applications Examples of applications Inflection resistant cable type available for all models Inflection resistant cable type with improved flex resistance is available for all models. Select the model suitable for your specific application. The standard type comes with lead wires with the same diameter as previous models, but the outside diameter of the cable is 2.0 mm 0.079 in and thinner than the cables of the EX‑10 series. This facilitates cable routing. Detection of parts in parts feeder IP67 protective structure The sensors features an IP67 protective structure to allow their use in process lines where water is used or splashed. Rust-resistant stainless steel sensor mounting brackets and screws are available. Note: If water splashes on the sensor during sensing operation, it may sense water as an object. IP67 (IEC) Detection of presence / absence of test tube tray Options A variety of mounting brackets are available! A spacer for mounting at the back (1 type) for through-wall sensing and sensor mounting brackets (3 types) are available to meet a diversity of sensor installation needs. Spacer for mounting at the back (for front sensing type only) Operation indicator (orange) can be checked from the rear side. Through-wall detection Detection of LED lead 3 Ultra-minute Photoelectric Sensor EX-Z SERIES ORDER GUIDE Type Appearance Model No. (Note) Sensing range NPN output 50 mm 1.969 in 500 mm 19.685 in Inflection resistant cable Thru-beam Front sensing 200 mm 7.874 in 50 mm 1.969 in 200 mm 7.874 in 500 mm 19.685 in 50 mm 1.969 in 500 mm 19.685 in Inflection resistant cable Side sensing 200 mm 7.874 in 50 mm 1.969 in 200 mm 7.874 in 500 mm 19.685 in PNP output Output operation EX-Z11FA EX-Z11FA-P Light-ON EX-Z11FB EX-Z11FB-P Dark-ON EX-Z12FA EX-Z12FA-P Light-ON EX-Z12FB EX-Z12FB-P Dark-ON EX-Z13FA EX-Z13FA-P Light-ON EX-Z13FB EX-Z13FB-P Dark-ON EX-Z11FA-R EX-Z11FA-P-R Light-ON EX-Z11FB-R EX-Z11FB-P-R Dark-ON EX-Z12FA-R EX-Z12FA-P-R Light-ON EX-Z12FB-R EX-Z12FB-P-R Dark-ON EX-Z13FA-R EX-Z13FA-P-R Light-ON EX-Z13FB-R EX-Z13FB-P-R Dark-ON EX-Z11A EX-Z11A-P Light-ON EX-Z11B EX-Z11B-P Dark-ON EX-Z12A EX-Z12A-P Light-ON EX-Z12B EX-Z12B-P Dark-ON EX-Z13A EX-Z13A-P Light-ON EX-Z13B EX-Z13B-P Dark-ON EX-Z11A-R EX-Z11A-P-R Light-ON EX-Z11B-R EX-Z11B-P-R Dark-ON EX-Z12A-R EX-Z12A-P-R Light-ON EX-Z12B-R EX-Z12B-P-R Dark-ON EX-Z13A-R EX-Z13A-P-R Light-ON EX-Z13B-R EX-Z13B-P-R Dark-ON Note: Mounting bracket is not supplied with the sensor. Please select from the range of optional sensor mounting brackets (MS-EXZ-□). Note: The model No. with “E” shown on the label affixed to the thru-beam type sensor is the emitter, “D” shown on the label is the receiver. OPTIONS Designation Sensor mounting bracket Spacer for mounting at the back Model No. Description MS-EXZ-1 L-shaped mounting bracket (SUS304) for front sensing and side sensing types (2 sets are required) MS-EXZ-2 Mounting bracket (SUS304) for front sensing type (2 sets are required) MS-EXZ-3 Mounting bracket (SUS304) for side sensing type (2 sets are required) MS-EXZ-4 Spacer for mounting at the back (polyacetal) for front sensing type Sensor mounting bracket • MS-EXZ-1 Material: S  tainless steel (SUS304) Two M2 (length 4 mm 0.157 in) pan head screws and two M2 (length 8 mm 0.315 in) pan head screws are attached. 4 Spacer for mounting at the back • MS-EXZ-2 • MS-EXZ-3 • MS-EXZ-4 Material: S  tainless steel (SUS304) Material: Stainless steel (SUS304) Two M2 (length 4 mm 0.157 in) pan head screws are attached. Two M2 (length 8 mm 0.315 in) pan head screws are attached. Material: Polyacetal M2 (length: 10 mm 0.394 in) screws, nuts, spring washers and flat washers are attached. (20 pieces each) Ultra-minute Photoelectric Sensor EX-Z SERIES SPECIFICATIONS Type Item Model No. (Note 2) Thru-beam Front sensing Side sensing Light-ON EX-Z11FA(-P)(-R) Dark-ON EX-Z11FB(-P)(-R) Sensing distance Minimum sensing object Front sensing Side sensing EX-Z11A(-P)(-R) EX-Z12FA(-P)(-R) EX-Z11B(-P)(-R) EX-Z12FB(-P)(-R) Side sensing EX-Z12A(-P)(-R) EX-Z13FA(-P)(-R) EX-Z13A(-P)(-R) EX-Z12B(-P)(-R) EX-Z13FB(-P)(-R) EX-Z13B(-P)(-R) 50 mm 1.969 in 200 mm 7.874 in 500 mm 19.685 in ø0.3 mm ø0.012 in opaque object (Completely beam interrupted object) Setting distance between emitter and receiver: 50 mm 1.969 in ø0.5 mm ø0.02 in opaque object (Completely beam interrupted object) Setting distance between emitter and receiver: 200 mm 7.874 in ø1.0 mm ø0.039 in opaque object (Completely beam interrupted object) Setting distance between emitter and receiver: 500 mm 19.685 in Hysteresis ‒ Repeatability (Perpendicular to sensing axis) 0.02 mm 0.001 in or less 0.03 mm 0.001 in or less Supply voltage 0.05 mm 0.002 in or less 12 to 24 V DC ±10 % Ripple P-P 10 % or less Current consumption Emitter: 10 mA or less, Receiver: 10 mA or less NPN open-collector transistor • Maximum sink current: 20 mA • Applied voltage: 30 V DC or less (between output and 0 V) • Residual voltage: 1.5 V or less (at 20 mA sink current) Output Short-circuit protection PNP open-collector transistor • Maximum source current: 20 mA • Applied voltage: 30 V DC or less (between output and +V) • Residual voltage: 1.5 V or less (at 20 mA source current) Incorporated Response time 0.5 ms or less Operation indicator Orange LED (Lights up when the sensing output is ON) Stability indicator Green LED (Lights up under the stable light received condition or the stable dark condition) Protection Environment resistance Front sensing IP67 (IEC) Ambient temperature -10 to +55 °C 14 to +131 °F (No dew condensation or icing allowed), Storage: -30 to +70 °C -22 to +158 °F Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH Ambient illuminance Incandescent light: 5,000 ℓx at the light-receiving face Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure Insulation resistance 20 MΩ or more, with 250 V DC megger between all supply terminals connected together and enclosure Vibration resistance 10 to 500 Hz frequency, 3 mm 0.118 in amplitude in X, Y and Z directions for two hours each 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each Shock resistance Light emitting element Red LED (Peak emission wavelength: 650 nm 0.026 mil, modulated) Grounding Floating Material Enclosure: PBT, Lens: Polycarbonate, Metallic part: Stainless steel (SUS304) (SUS301 for rear side of front sensing type) 0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long Cable (Note 3) Extension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver). Cable extension Weight Net weight (each emitter and receiver): 15 g approx., Gross weight: 35 g approx. Accessories M2 mounting screws: 1 set (front sensing type: 6 mm 0.236 in in length; side sensing type: 10 mm 0.394 in in length) Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23°C 73°F. 2) Model Nos. having the “-P” are PNP output type and model Nos. having the “-R” are inflection resistant cable type. 3) The inflection resistant cable type has a 0.1 mm2 3-core (thru-beam type emitter: 2-core) flexible cabtyre cable, 2 m 6.562 ft long. PRECAUTIONS FOR PROPER USE •• Never use this product as a sensing device for personnel protection. •• In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. Mounting •• In case of mounting on tapped holes (Unit: mm in) Side sensing 8.5 0.335 Front sensing Sensing direction M2 screw (length 10 0.394) (accessory) Sensing 8.5 direction 0.335 M2 × 0.4 0.016 hole tapped, 5 0.197 deep M2 × 0.4 0.016 hole tapped, 7 0.276 deep The tightening torque should be 0.2 N·m or less. M2 screw (length 6 0.236) (accessory) •• In case of using attached screws and nuts (Unit: mm in) Side sensing 8.5 0.335 Sensing direction Front sensing Nut Spring washer Flat washer M2 screw (length 10 0.394) Thickness of mounting plate: 2 0.079 or less (accessory) Nut Spring washer Flat washer Sensing 8.5 direction 0.335 Thickness of mounting plate: 2 0.079 or less M2 screw (length 6 0.236) (accessory) The tightening torque should be 0.2 N·m or less. Other ••Do not use during the initial transient time (0.5 sec. approx.) after the power supply is switched on. 5 Ultra-minute Photoelectric Sensor EX-Z SERIES I/O CIRCUIT DIAGRAMS NPN output type PNP output type I/O circuit diagram I/O circuit diagram Color code D2 Tr (Brown) +V (Brown) +V Load (Black) Output (Note) + − 20 mA max. ZD Sensor circuit Sensor circuit D1 Color code 12 to 24 V DC ±10 % (Blue) 0 V Internal circuit Users’ circuit Note: The emitter does not incorporate the output. ZD Tr 20mA max. + D1 (Black) Output (Note) Load (Blue) 0 V Internal circuit Users’ circuit D2 − 12 to 24 V DC ±10 % Note: The emitter does not incorporate the output. Symbols … D1: Reverse supply polarity protection diode D2: Reverse output polarity protection diode ZD: Surge absorption zener diode Tr: NPN output transistor Symbols … D1: Reverse supply polarity protection diode D2: Reverse output polarity protection diode ZD: Surge absorption zener diode Tr: PNP output transistor SENSING CHARACTERISTICS (TYPICAL) EX-Z11F□   EX-Z11□ Parallel deviation Thru-beam type Angular deviation 20 Emitter 0.787 ℓ L Receiver 10 0 10 20 0.394 0.394 0.787 Left Center Right Operating position ℓ (mm in) 60 2.362 40 1.575 20 0.787 Emitter Receiver θ L 0 100 50 0 ℓ 600 23.622 Receiver L 400 15.748 6 Angular deviation 800 31.496 Emitter θ 600 23.622 Receiver L 400 15.748 200 7.874 0 100 3.937 Thru-beam type Setting distance L (mm in) Setting distance L (mm in) Emitter 100 Left Center Right Operating angle θ (°) EX-Z13F□   EX-Z13□ Parallel deviation 50 50 0 50 100 1.969 1.969 3.937 Left Center Right Operating position ℓ (mm in) 200 7.874 0 100 50 0 50 Left Center Right Operating angle θ (°) 100 200 7.874 100 3.937 Emitter ℓ 0 100 3.937 Receiver L 50 0 50 100 1.969 1.969 3.937 Left Center Right Operating position ℓ (mm in) Setting distance L (mm in) 40 1.575 800 31.496 Angular deviation Emitter Receiver Setting distance L (mm in) 60 2.362 0 20 0.787 Parallel deviation Thru-beam type 80 3.150 Setting distance L (mm in) Setting distance L (mm in) 80 3.150 EX-Z12F□   EX-Z12□ 200 7.874 θ L 100 3.937 0 100 50 0 50 Left Center Right Operating angle θ (°) 100 Ultra-minute Photoelectric Sensor DIMENSIONS (Unit: mm in) EX-Z SERIES The CAD data can be downloaded from the website. EX-Z11F□   EX-Z12F□   EX-Z13F□ Operation indicator (Orange) 1.75 0.069 1.75 0.069 Beam-emitting part Beam-receiving part 2-ø2.2 ø0.087 mounting holes ø2.2 ø0.087 mounting holes 3 0.118 2.225 0.088 2.225 0.088 ø2.0 ø0.079 cable, 2 m 6.562 ft long 4.45 0.175 ø2.0 ø0.079 cable, 2 m 6.562 ft long 4.45 0.175 8 0.315 3 0.118 8 0.315 Emitter Receiver EX-Z11□   EX-Z12□   EX-Z13□ Sensor 6.5 0.256 6.5 0.256 ø2.0 ø0.079 cable, 2 m 6.562 ft long 8.5 0.335 8.5 0.335 ø2.0 ø0.079 cable, 2 m 6.562 ft long 0.4 0.016 Stability indicator (Green) Beam-receiving part 1 0.039 Operation indicator (Orange) Beam-emitting part 2.2 0.087 1.75 0.069 Stability indicator (Green) 4.25 0.167 4.25 0.167 1.75 0.069 Operation indicator (Orange) 2-ø2.2 ø0.087 mounting holes 2.5 0.098 4.25 0.167 3.5 0.138 3.5 0.138 1 0.039 0.4 0.016 2.2 0.087 12 0.472 1.5 0.059 12 0.472 1.5 0.059 14 0.551 8.5 0.335 4.25 0.167 4.25 0.167 Operation indicator (Orange) 8.5 0.335 12 0.472 14 0.551 Stability indicator (Green) 4.4 0.173 Stability indicator (Green) 12 0.472 4.4 0.173 1.75 0.069 1.75 0.069 Sensor 2-ø2.2 ø0.087 mounting holes 2.9 0.114 2.9 0.114 5.5 0.217 5.5 0.217 2.5 0.098 4.25 0.167 Emitter Sensor mounting bracket (Optional) Material: Stainless steel (SUS304) Two M2 (length 4 mm 0.157 in) pan head screws and two M2 (length 8 mm 0.315 in) pan head screws are attached. 4-M2 × 0.4 0.016 thru-hole threads 15 0.591 8 0.315 3.2 0.126 3.5 0.138 1.4 0.055 8.5 0.335 1.4 0.055 6.25 0.246 3.2 0.126 1.75 0.069 1.75 0.069 4.75 0.187 1.2 0.047 8.5 0.335 4-M2 × 0.4 0.016 thru-hole threads 18.7 0.736 9 0.354 12 0.472 8.5 0.335 6.8 0.268 12 0.472 15 0.591 3.2 0.126 MS-EXZ-2 3.3 0.130 Sensor mounting bracket (Optional) 10.5 0.413 7 0.276 8 0.315 1.4 0.055 MS-EXZ-1 Receiver 6.8 0.268 Material: Stainless steel (SUS304) Two M2 (length 4 mm 0.157 in) pan head screws are attached. 7 Ultra-minute Photoelectric Sensor EX-Z SERIES DIMENSIONS (Unit: mm in) MS-EXZ-3 The CAD data can be downloaded from the website. Sensor mounting bracket (Optional) MS-EXZ-4 17.7 0.697 7.5 0.295 3.2 0.126 1.2 0.047 5.1 0.201 8.5 0.335 12 0.472 7.25 0.285 2-ø2.2 ø0.087 1.7 0.067 2.8 0.110 12 0.472 3.5 0.138 8.5 0.335 9.9 0.390 1.4 0.055 8 0.315 1.4 0.055 15 0.591 3.2 0.126 3.5 0.138 Spacer for mounting at the back (Optional) 4.5 0.177 Material: Polyacetal 2-M2 × 0.4 0.016 thru-hole threads Set of 10 pieces M2 (length: 10 mm 0.394 in) screws, nuts, spring washers and flat washers are attached. (20 pieces each) 6.8 0.268 Material: Stainless steel (SUS304) Two M2 (length 8 mm 0.315 in) pan head screws are attached. EX Family Products Ultra-slim Photoelectric Sensor Amplifier Built-in EX-10SERIES Ver.2 Ultra-thin dimension • Only 3.5 mm 0.138 in thick • Long sensing range of 1 m 3.281 ft • High speed response of 0.5 ms Ultra-compact Photoelectric Sensor Amplifier Built-in EX-20SERIES Ver.2 Threaded Miniature Photoelectric Sensor EX-30SERIES Ver.2 Easy installation with M3 screws • Equipped with sensitivity adjuster • Long sensing range of 2 m 6.562 ft • Red spotlight for easy confirmation of sensing point Amplifier Built-in One-point mounting • Simple design with sensing axis corresponding with mounting hole • Can be installed using the same thread size (M4 for thru-beam type, M6 for reflective type) as that of standard fiber Disclaimer The applications described in the catalog are all intended for examples only. The purchase of our products described in the catalog shall not be regarded as granting of a license to use our products in the described applications. We do NOT warrant that we have obtained some intellectual properties, such as patent rights, with respect to such applications, or that the described applications may not infringe any intellectual property rights, such as patent rights, of a third party. Please contact: 2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan Global Sales Department ■Telephone: +81-568-33-7861 ■Facsimile: +81-568-33-8591 panasonic.net/id/pidsx/global All Rights Reserved © No. CE-EXZ-10 July, 2015 Specifications are subject to change without notice. 2015 Printed in Japan