EXB-U28300JX

Chip Resistor Array Chip Resistor Array Type: EXB 14V, 18V, 24V, 28V, N8V, 2HV, 34V, V4V, 38V, V8V, S8V Features ● High density 2 resistors in 0.8 mm × 0.6 mm size / 0302 inch size : EXB14V 4 resistors in 1.4 mm × 0.6 mm size / 0502 inch size : EXB18V 2 resistors in 1.0 mm × 1.0 mm size / 0404 inch size : EXB24V 4 resistors in 2.0 mm × 1.0 mm size / 0804 inch size : EXB28V, EXBN8V 8 resistors in 3.8 mm × 1.6 mm size / 1506 inch size : EXB2HV 2 resistors in 1.6 mm × 1.6 mm size / 0606 inch size : EXB34V, EXBV4V 4 resistors in 3.2 mm × 1.6 mm size / 1206 inch size : EXB38V, EXBV8V 4 resistors in 5.1 mm × 2.2 mm size / 2009 inch size : EXBS8V ● Improvement of placement efficiency Placement efficiency of Chip Resistor Array is two, four or eight times of the flat type chip resistor ● Reference Standard…IEC 60115-9, JIS C 5201-9, EIAJ RC-2129 ● AEC-Q200 qualified (EXB2, EXB3) ● RoHS compliant ■ As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions, Please see Data Files Explanation of Part Numbers Product Code Thick Film Chip Resistor Networks 1 2 3 4 5 6 7 8 9 10 11 E X B V 8 V 4 7 2 J V Size and construction No. of Terminal Inch Terminal type 4 4 Terminal Convex/ 1 0201 Array Flat Terminal 8 8 Terminal H 16 Terminal 2 0402 Array Convex 3 0603 Array Terminal Code N V S 0402 Array Concave 0603 Array Terminal 0805 Array Schematics Packaging Methods Resistance Value Resistance Packaging Part No. Isolated The first two digits are Tolerance Code V type significant figures of J ±5 % Embossed Carrier Taping Nil 4 mm pitch, 2,500 pcs. EXBS8V resistance value and 0 Jumper the third one denotes Punched Carrier Taping EXB14V, 18V, the number of zeros X 2 mm pitch, 10,000 pcs. 24V, 28V, N8V following. Jumper is expressed by R00 Punched Carrier Taping EXB2HV, 34V, V 4 mm pitch, 5,000 pcs. 38V, V4V, V8V Example : 222 → 2.2 kΩ Construction (Example : Concave Terminal) Schematics ● Isolated type 14V, 24V, 34V, V4V 2 resistors 18V, 28V, N8V, 38V, V8V, S8V 4 resistors 4 3 8 7 6 5 1 2 1 2 3 4 Protective coating Alumina substrate Thick film resistive element 2HV 8 resistors Electrode (Outer) Electrode (Between) 16 15 14 13 12 11 10 9 1 8 Electrode (Inner) 2 3 4 5 6 7 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Sep. 2014 Chip Resistor Array Ratings Item Specifications Resistance Range 10 Ω to 1 MΩ : E24 series Resistance Tolerance J : ±5 % 14V,24V,V4V,34V 14V,24V,V4V,34V 16 terminal 25 V S8V 100 V 14V,18V 25 V 100 V S8V 200 V T.C.R. ±200×10-6/°C 0.031 W/element Category Temperature Range –55 °C to 125 °C 18V 0.031 W/element (0.1 W/package) Power Rating at 70 °C 24V,28V,V4V,34V,V8V,38V 0.063 W/element S8V 0.1 W/element 2HV 0.063 W/element (0.25 W/package) 14V,18V Jumper Array 14V,N8V 50 V Maximum Overload 2HV (2) Voltage 24V,28V,N8V,38V,34V,V4V,V8V Number of Resistors 18V,28V,N8V,38V,V8V,S8V 4 element 8 element 12.5 V Limiting Element 2HV (1) Voltage 24V,28V,N8V,38V,34V,V4V,V8V 2 element 2HV Specifications 14V,18V 4 terminal Number of Terminals 18V,28V,N8V,38V,V8V,S8V 8 terminal 2HV Item 0.5 A Rated Current 2HV,24V,28V,N8V,38V,34V,V4V,V8V Maximum Overload Current 50 V 1A S8V 2A 14V,18V 1A 2HV,24V,28V,N8V,38V,34V,V4V,V8V 2A S8V 4A (1) Rated Continuous Working Voltage (RCWV) shall be determined from RCWV=√Power Rating × Resistance Value, or Limiting Element Voltage listed above, whichever less. (2) Overload (Short-time Overload) Test Voltage (SOTV) shall be determined from SOTV=2.5 × Power Rating or max. Overload Voltage listed above whichever less. –55 °C Rated Load (%) Power Derating Curve For resistors operated in ambient temperatures above 70 °C, power rating shall be derated in accordance with the figure on the right. 70 °C 100 80 60 40 20 125 °C 0 –60 –40 –20 0 20 40 60 80 100 120 140 160 180 Ambient Temperature (°C) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Sep. 2014 Chip Resistor Array Dimensions in mm (not to scale) (1) Convex Terminal type EXB14V, 24V, 34V EXB28V, 38V A2 G P T P L G B B G W W G B A1 B A1 T L EXB2HV G B W G B A1 A2 P T L Dimensions (mm) Part No. (inch size) L EXB14V (0201×2) EXB24V (0402×2) 0.80 W ±0.10 ±0.10 1.00 ±0.10 1.00 1.60 3.80 0.45 ±0.10 0.35 ±0.10 0.35 ±0.10 0.35 ±0.10 0.65 ±0.15 ±0.10 0.65 ±0.15 0.45 1.60 3.20 0.15 ±0.10 0.35 1.60 1.60 EXB38V (0603×4) — 0.40 0.35 ±0.10 ±0.20 EXB34V (0603×2) B ±0.10 ±0.10 ±0.20 A2 ±0.10 ±0.10 1.00 A1 0.35 0.35 ±0.10 ±0.10 2.00 EXB2HV (0402×8) ±0.10 0.60 ±0.10 EXB28V (0402×4) T ±0.15 0.50 ±0.15 0.50 — P ±0.10 (0.50) 0.15 ±0.10 (0.65) 0.25 0.18 ±0.10 ±0.10 — ±0.10 0.5 ±0.10 1.2 ±0.10 2.0 ±0.10 9.0 ±0.20 3.5 ±0.20 7.0 0.20 ±0.10 (0.50) 0.25 0.30 ±0.10 (0.50) 0.30 ±0.20 (0.80) 0.30 ±0.20 (0.80) 0.35 0.30 ±0.15 0.45 0.30 Mass (Weight) [g/1000 pcs.] G ( ) Reference (2) Concave Terminal type EXBV4V EXBN8V, V8V, S8V A2 P L G G B B G W W G B A1 B A1 P T T L Dimensions (mm) Part No. (inch size) L EXBN8V (0402×4) 2.00 W ±0.10 ±0.10 ±0.10 1.00 +0.20 –0.10 1.60 ±0.10 ±0.10 0.60 ±0.10 ±0.10 0.60 ±0.10 0.80 ±0.15 0.60 +0.20 0.60 1.60 EXBV8V (0603×4) 3.20 –0.10 +0.20 1.60 –0.10 EXBS8V (0805×4) +0.20 –0.10 +0.20 –0.10 ±0.20 2.20 A1 0.30 0.45 +0.20 –0.10 EXBV4V (0603×2) 5.08 T 0.70 A2 ±0.10 0.30 — ±0.10 0.60 ±0.15 0.80 B 0.20 ±0.15 P (0.50) ±0.15 3.0 ±0.15 5.0 ±0.15 10 ±0.15 30 0.30 ±0.15 (0.80) 0.45 0.30 ±0.15 (0.80) 0.45 0.50 ±0.15 0.30 (1.27) 0.55 ( ) Reference (3) Flat Terminal type G EXB18V A2 B G W B A1 Mass (Weight) [g/1000 pcs.] G P T L Dimensions (mm) Part No. (inch size) L W T A1 A2 B P G Mass (Weight) [g/1000 pcs.] EXB18V (0201×4) 1.40±0.10 0.60±0.10 0.35±0.10 0.20±0.10 0.20±0.10 0.10±0.10 (0.40) 0.20±0.10 1.0 ( ) Reference Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Sep. 2014