EXBN8V101JX

Chip Resistor Array Chip Resistor Array Type: EXB 14V, 18V, 24V, 28V, N8V, 2HV, 34V, V4V, 38V, V8V, S8V Features ● High density 2 resistors in 0.8 mm × 0.6 mm size / 0302 inch size : EXB14V 4 resistors in 1.4 mm × 0.6 mm size / 0502 inch size : EXB18V 2 resistors in 1.0 mm × 1.0 mm size / 0404 inch size : EXB24V 4 resistors in 2.0 mm × 1.0 mm size / 0804 inch size : EXB28V, EXBN8V 8 resistors in 3.8 mm × 1.6 mm size / 1506 inch size : EXB2HV 2 resistors in 1.6 mm × 1.6 mm size / 0606 inch size : EXB34V, EXBV4V 4 resistors in 3.2 mm × 1.6 mm size / 1206 inch size : EXB38V, EXBV8V 4 resistors in 5.1 mm × 2.2 mm size / 2009 inch size : EXBS8V ● Improvement of placement efficiency Placement efficiency of Chip Resistor Array is two, four or eight times of the flat type chip resistor ● Reference Standard…IEC 60115-9, JIS C 5201-9, EIAJ RC-2129 ● AEC-Q200 qualified (EXB2, EXB3) ● RoHS compliant ■ As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions, Please see Data Files Explanation of Part Numbers Product Code Thick Film Chip Resistor Networks 1 2 3 4 5 6 7 8 9 10 11 E X B V 8 V 4 7 2 J V Code 14 18 24 28 2H 34 38 N8 V4 V8 S8 Inch 0201×2 0201×4 0402×2 0402×4 0602×8 0603×2 0603×4 0402×4 0603×2 0603×4 0805×4 Construction Convex Terminal Flat Terminal Convex Terminal Convex Terminal Convex Terminal Convex Terminal Convex Terminal Concave Terminal Concave Terminal Concave Terminal Concave Terminal Schematics Packaging Methods Resistance Value Resistance Packaging Part No. Isolated The first two digits are Tolerance Code V type significant figures of J ±5 % Embossed Carrier Taping Nil 4 mm pitch, 2,500 pcs. EXBS8V resistance value and 0 Jumper the third one denotes Punched Carrier Taping EXB14V, 18V, the number of zeros X 2 mm pitch, 10,000 pcs. 24V, 28V, N8V following. Jumper is expressed by R00 Punched Carrier Taping EXB2HV, 34V, V 4 mm pitch, 5,000 pcs. 38V, V4V, V8V Example : 222 → 2.2k Ω Construction (Example : Concave Terminal) Schematics ● Isolated type Protective coating 14V, 24V, 34V, V4V 18V, 28V, N8V, 38V, V8V, S8V 2 resistors 4 resistors 2HV 8 resistors 4 3 8 7 6 5 16 15 14 13 12 11 10 9 1 2 1 2 3 4 1 8 Alumina substrate Thick film resistive element Electrode (Outer) Electrode (Between) Electrode (Inner) 2 3 4 5 6 7 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Feb. 2018 Chip Resistor Array Ratings [For Resistor] Part No. (inch size) Power Rating Limiting Element Maximum Overload Resistance (1) (2) Voltage Voltage at 70 °C Tolerance (W / element) (V) (V) (%) EXB14V 0.031 (0201×2) 0.031 EXB18V (0201×2) (0.1 W / package) EXB24V 0.063 (0402×2) EXB28V 0.063 (0402×4) 0.063 EXB2HV (0602×8) (0.25 W / package) EXB34V 0.063 (0603×2) EXB38V 0.063 (0603×4) EXBN8V 0.031 (0402×4) EXBV4V 0.063 (0603×2) EXBV8V 0.063 (0603×4) EXBS8V 0.1 (0805×4) Resistance Range (Ω) T.C.R. –6 (×10 /°C) Category AEC-Q200 Temperature Range Grade (°C) 12.5 25 ±5 10 to 1M (E24) –55 to +125 – 12.5 25 ±5 10 to 1M (E24) –55 to +125 – 50 100 ±5 1 to 1M (E24) –55 to +125 Grade 1 50 100 ±5 1 to 1M (E24) –55 to +125 Grade 1 25 50 ±5 50 100 ±5 1 to 1M (E24) 50 100 ±5 10 Ω to1M Ω : 1 to 1M (E24) ±200 –55 to +125 Grade 1 50 100 ±5 10 to 1M (E24) –55 to +125 – 50 100 ±5 10 to 1M (E24) –55 to +125 – 50 100 ±5 10 to 1M (E24) –55 to +125 – 100 200 ±5 10 to 1M (E24) –55 to +125 – 10 to 1M (E24)