EZA-EG3W11AV

ESD Suppressor, High Withstanding Type ESD Suppressor, High Withstanding Type Type: EZAEG EZAEG3W Features ● Excellent ESD withstanding (Conforms with automotive ESD standards (ISO10605, ● Low capacitance 0.10 pF : 1608 (0603) size ● High rated voltage (DC 50 V) contributes to reduce the risk of communication error ● AEC-Q200 qualified ● RoHS compliant air discharge 15 kV)) Recommended Applications ● High speed data line for ● Automotive Antenna ● Amusement eqipment automotive (CAN, Ethernet, USB, LVDS) Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 10 11 E Z A E G 3 W 1 1 A V Product Code ESD Suppressor Size Code Size mm (inch) 3 1608 (0603) Design Specification Code Design Specification High with standing type W Rated voltage 50 V Construction Insulating ceramic Peak Voltage Code Peak Voltage 11 1000 V Special Feature Code Special Feature A Standard Code V Packaging Methods Packaging Part No. Punched Carrier Taping EZAE3W 4 mm Pitch, 4,000 pcs. Dimensions in mm (not to scale) Terminal electrode L W T a Inner electrode Discharge area (Hollow inside) Part No. (inch size) a Dimensions (mm) L W T a Mass (Weight) [g/1000 pcs.] EZAEG3W 1.60±0.15 0.80±0.15 0.80±0.15 0.30±0.20 (0603) 3.8 Circuit Configuration Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Apr. 2017 ESD Suppressor, High Withstanding Type Ratings Part Number (inch size) Capacitance(1) Peak Voltage(2) Leakage Current(3) Rated Voltage Category Temperature Range EZAEG3W11AV (0603) 0.10+0.10 –0.08 pF 1000 V max. (700 V typ.) 1 µA 50 V max. –55 to +125 °C (1) Capacitance = The capacitance value shall be measured under the conditions specified below. Frequency : 1 MHz±10 %, Voltage : 1 Vrms±0.2 Vrms, Temperature : 25 °C±2 °C (2) Peak Voltage = The peak voltage value shall be measured under the following conditions. ESD test conditions : ISO10605(330 pF-2 kΩ),15 kV air discharge (3) Leakage current = Leakage current value shall be measured at rated voltage (DC50 V) Frequency Characteristics ESD Suppression Voltage Waveform 5 1000 800 -5 Volts (V) Attenuation (dB) 0 -10 -15 600 400 200 -20 -25 0 -30 -200 -20 1 10 100 1000 Frequency(MHz) 10000 0 20 40 60 80 100 120 140 160 180 Times (nSecs) Typical Circuits Requiring Protection ● Automotive network (CAN, Ethernet) ● Automotive antenna Antenna Common mode Choke coil DC cut Capacitor Transceiver IC IF Protected device FET, LNA ESD Suppressor ESD Suppressor TVS Recommended Land Pattern Recommended land pattern design for ESD Suppressor is shown below. ESD Suppressor Part Number (inch size) Dimensions (mm) b c 0.8 to 1.0 2.0 to 2.6 0.8 to 1.0 c EZAEG3W (0603) a a b ■ As for Packaging Methods, Soldering Conditions and Safety Precautions, Please see Data Files Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Apr. 2017