Plastic Film Capacitors
Metallized Polypropylene Film Capacitor
EZPE series
Features
● High safety, Self-healing and Self-protecting function built-in
● Long product life, High reliability
● Low loss, Low ESR
● Flame retardant (Case and sealing resin)
● RoHS compliant
Recommended applications
For DC filtering, DC link circuit
● Solar inverters
● Wind power generation
● Industrial power supplies
● Inverter circuit in appliances (Air Conditioners etc.)
Construction
● Dielectric
● Electrodes
● Plastic case
● Sealing
● Terminals
:Polypropylene film
:Metallized dielectric with segmented pattern
:UL94 V-0
:UL94 V-0
:Tinned wires, 2-pin and 4-pin versions
Explanation of part number
1
2
3
4
E
Z
P
E
Product code
5
Dielectric &
construction
6
Rated voltage
Code
50
80
1B
1D
R.voltage [DC]
500 V
800 V
1100 V
1300 V
7
8
9
Capacitance
10
Pin type
Code
L
M
11
12
T
A
Case type
Suffix
Pin type
2 pin type
4 pin type
Specifications
Category temperature range*1
−40 ℃ to +85 ℃
500 V, 800 V, 1100 V, 1300 V
*2
Rated voltag [DC]
Rated capacitance
Capacitance tolerance
Withstand voltage
Insulation resistanc (IR)
500 V
800 V
1100 V
1300 V
(Derating of rated voltage by more than 70 ℃*3)
10 μF to 110 μF
10 μF to 60 μF
10 μF to 40 μF
10 μF to 25 μF
±10 %
Between terminals:Rated voltage (V) × 150 % 10 s
Terminal to case:2110 V [AC] (50 Hz or 60 Hz), 10 s
CR ≧ 10,000 Ω・F (20 ℃, 500 V [DC], 60 s)
*1 :The temperature of capacitor surface (case)
*2 :Use for DC voltage only
*3 :Refer to the page of “DC voltage derating”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01-Dec-15
EZPE series
Marking
P1±1
4.0±0.5
H±0.5
MArking
4.0±2.0
H±0.5
Dimensions
P2±1
P1±1
ø±0.2
Marking(ex.)
Panasonic
W±0.5
W±0.5
ø±0.2
DC (a)
V
(b)
μF
(a) Rated voltage
(b) Capacitance
(c) Lot No.
(c)
L±0.5
L±0.5
Unit:mm
Rating · Dimensions · Quantity
■ Rated voltage [DC]:500 V at 70 ℃ (450 V at 85 ℃)
Part No.
Capacitance
(μF)
Dimensions (mm)
Permissible current
W
H
L
P1
P2
ø
dv/dt
[V/μs]
Peak
current*1
(Ao-p)
RMS
*2
current
(A rms)
ESR*3
(mΩ)
tan δ*4
(%)
Mass
(g)
EZPE50106LTA
10
20
42
41.5
37.5
–
1.2
21
210
5.0
22.0
0.28
45
EZPE50156LTA
15
20
42
41.5
37.5
–
1.2
21
315
7.5
14.8
0.28
45
EZPE50206LTA
20
20
42
41.5
37.5
–
1.2
21
420
9.5
11.0
0.28
44
EZPE50256LTA
25
20
42
41.5
37.5
–
1.2
21
525
11.0
8.8
0.28
43
EZPE50306MTA
30
20
42
41.5
37.5
10.2
1.2
21
630
12.5
7.0
0.28
43
EZPE50356MTA
35
30
51
41.5
37.5
10.2
1.2
21
735
13.5
6.2
0.28
83
EZPE50406MTA
40
30
51
41.5
37.5
10.2
1.2
21
840
14.5
5.4
0.28
82
EZPE50456MTA
45
30
51
41.5
37.5
10.2
1.2
21
945
15.2
4.9
0.28
81
EZPE50506MTA
50
30
51
41.5
37.5
20.3
1.2
21
1050
16.0
4.4
0.28
80
EZPE50556MTA
55
30
51
41.5
37.5
20.3
1.2
21
1155
16.3
4.1
0.28
79
EZPE50606MTA
60
30
51
41.5
37.5
20.3
1.2
21
1260
16.5
3.9
0.28
77
EZPE50656MTA
65
30
51
57.5
52.5
10.2
1.2
14
910
15.0
6.8
0.44
111
EZPE50706MTA
70
30
51
57.5
52.5
10.2
1.2
14
980
15.5
6.5
0.44
109
EZPE50756MTA
75
30
51
57.5
52.5
20.3
1.2
14
1050
16.0
6.0
0.44
108
EZPE50806MTA
80
30
51
57.5
52.5
20.3
1.2
14
1120
16.5
5.7
0.44
106
EZPE50856MTA
85
35
56
57.5
52.5
20.3
1.2
14
1190
16.7
5.4
0.44
142
EZPE50906MTA
90
35
56
57.5
52.5
20.3
1.2
14
1260
17.0
5.1
0.44
141
EZPE50956MTA
95
35
56
57.5
52.5
20.3
1.2
14
1330
17.5
4.9
0.44
140
EZPE50107MTA
100
35
56
57.5
52.5
20.3
1.2
14
1400
18.0
4.7
0.44
139
EZPE50117MTA
110
35
56
57.5
52.5
20.3
1.2
14
1540
18.5
4.4
0.44
138
Min.
order
Q'ty*5
(PCS)
600
400
200
*1:When rising temperature of capacitor surface by continuous peak current (included pulse current),
use within limit specified for temperature of capacitor surface and self heating temperature rise.
*2:Maximum RMS current @70 ℃, 10 kHz
Use within limit for self heating temperature rise at capacitor surface.
*3:Typical values @ 20 ℃, 10 kHz ESR : less than 2.5×ESR typ
*4:Maximum dissipation factor @ 20 ℃, 1 kHz
*5:Minimum order quantity consists of 4 packing units.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01-Dec-15
EZPE series
Rating · Dimensions · Quantity
■ Rated voltage [DC]:800 V at 70 ℃ (700 V at 85 ℃)
Dimensions (mm)
Permissible current
Capacitance
(μF)
W
H
L
P1
P2
ø
dv/dt
[V/μs]
EZPE80106LTA
10
20
42
41.5
37.5
–
1.2
22
220
EZPE80156MTA
15
20
42
41.5
37.5
10.2
1.2
22
EZPE80206MTA
20
30
51
41.5
37.5
10.2
1.2
EZPE80256MTA
25
30
51
41.5
37.5
10.2
EZPE80306MTA
30
30
51
41.5
37.5
20.3
EZPE80356MTA
35
30
51
57.5
52.5
EZPE80406MTA
40
30
51
57.5
52.5
EZPE80456MTA
45
30
51
57.5
52.5
EZPE80506MTA
50
35
56
57.5
52.5
EZPE80556MTA
55
35
56
57.5
52.5
EZPE80606MTA
60
35
56
57.5
52.5
Part No.
ESR*3
(mΩ)
tan δ*4
(%)
7
15.8
0.22
44
330
9
10.5
0.22
43
22
440
11
7.7
0.22
82
1.2
22
550
13
6.8
0.22
80
1.2
22
660
15
5.3
0.22
78
10.2
1.2
15
525
12
9.7
0.33
110
20.3
1.2
15
600
13
8.3
0.33
107
20.3
1.2
15
675
14
7.0
0.33
104
20.3
1.2
15
750
15
6.3
0.33
140
20.3
1.2
15
825
16
5.9
0.33
138
20.3
1.2
15
900
17
5.6
0.33
136
ESR*3
(mΩ)
tan δ*4
(%)
Peak
current
(Ao-p)
*1
RMS
current*2
(A rms)
Mass
(g)
Min.
order
Q'ty*5
(PCS)
600
400
200
■ Rated voltage [DC]:1100 V at 70 ℃ (920 V at 85 ℃)
Dimensions (mm)
Permissible current
Capacitance
(μF)
W
H
L
P1
P2
ø
dv/dt
[V/μs]
EZPE1B106MTA
10
20
42
41.5
37.5
10.2
1.2
54
540
7.0
12.3
0.20
43
EZPE1B156MTA
15
30
51
41.5
37.5
10.2
1.2
54
810
8.5
8.2
0.20
80
EZPE1B206MTA
20
30
51
41.5
37.5
20.3
1.2
54
1080
10.0
6.3
0.20
76
EZPE1B256MTA
25
30
51
57.5
52.5
10.2
1.2
35
875
8.0
10.7
0.28
107
EZPE1B306MTA
30
30
51
57.5
52.5
20.3
1.2
35
1050
9.0
8.5
0.28
103
EZPE1B356MTA
35
35
56
57.5
52.5
20.3
1.2
35
1225
10.0
7.2
0.28
137
EZPE1B406MTA
40
35
56
57.5
52.5
20.3
1.2
35
1400
11.0
6.5
0.28
134
ESR*3
(mΩ)
tan δ*4
(%)
Part No.
Peak
current*1
(Ao-p)
RMS
*2
current
(A rms)
Mass
(g)
Min.
order
Q'ty*5
(PCS)
600
400
200
■ Rated voltage [DC]:1300 V at 70 ℃ (1100 V at 85 ℃)
Dimensions (mm)
Permissible current
Capacitance
(μF)
W
H
L
P1
P2
ø
dv/dt
[V/μs]
EZPE1D106MTA
10
30
51
41.5
37.5
10.2
1.2
73
EZPE1D156MTA
15
30
51
57.5
52.5
10.2
1.2
EZPE1D206MTA
20
30
51
57.5
52.5
20.3
1.2
EZPE1D256MTA
25
35
56
57.5
52.5
20.3
1.2
Part No.
Peak
current
(Ao-p)
*1
RMS
current*2
(A rms)
Mass
(g)
730
12.0
10.0
0.17
80
50
750
10.0
14.5
0.22
109
50
1000
14.0
11.1
0.22
103
50
1250
17.0
8.5
0.22
136
Min.
order
Q'ty*5
(PCS)
400
200
*1:When rising temperature of capacitor surface by continuous peak current (included pulse current),
use within limit specified for temperature of capacitor surface and self heating temperature rise.
*2:Maximum RMS current @70 ℃, 10 kHz
Use within limit for self heating temperature rise at capacitor surface.
*3:Typical values @ 20 ℃, 10 kHz ESR : less than 2.5×ESR typ
*4:Maximum dissipation factor @ 20 ℃, 1 kHz
*5:Minimum order quantity consists of 4 packing units.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01-Dec-15
Guidelines and precautions regarding the
technical information and use of our products
described in this online catalog.
■ If you want to use our products described in this online catalog for applications requiring special
qualities or reliability, or for applications where the failure or malfunction of the products may directly
jeopardize human life or potentially cause personal injury (e.g. aircraft and aerospace equipment,
traffic and transportation equipment, combustion equipment, medical equipment, accident prevention,
anti-crime equipment, and/or safety equipment), it is necessary to verify whether the specifications of
our products fit to such applications. Please ensure that you will ask and check with our inquiry desk
as to whether the specifications of our products fit to such applications use before you use our products.
■ The quality and performance of our products as described in this online catalog only apply to our
products when used in isolation. Therefore, please ensure you evaluate and verify our products under
the specific circumstances in which our products are assembled in your own products and in which our
products will actually be used.
■ If you use our products in equipment that requires a high degree of reliability, regardless of the
application, it is recommended that you set up protection circuits and redundancy circuits in order
to ensure safety of your equipment.
■ The products and product specifications described in this online catalog are subject to change for
improvement without prior notice. Therefore, please be sure to request and confirm the latest product
specifications which explain the specifications of our products in detail, before you finalize the design
of your applications, purchase, or use our products.
■ The technical information in this online catalog provides examples of our products' typical operations
and application circuits. We do not guarantee the non-infringement of third party's intellectual property
rights and we do not grant any license, right, or interest in our intellectual property.
■ If any of our products, product specifications and/or technical information in this online catalog is to
be exported or provided to non-residents, the laws and regulations of the exporting country,
especially with regard to security and export control, shall be observed.
■ The switchover date for compliance with the RoHS Directive/REACH Regulations varies depending
on the part number or series of our products.
■ When you use the inventory of our products for which it is unclear whether those products are
compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the website
inquiry form and contact us.
We do not take any responsibility for the use of our products outside the scope of the
specifications, descriptions, guidelines and precautions described in this online catalog.
16-Apr-21
Plastic Film Capacitors
PRECAUTION AND WARNING
● Please consult us in case that demand the specification of our company without fail and do the confirmation of the use
condition and that exceeds the entry value and be indistinct when you use it.
● The film capacitors contain a film based dielectric which may be flammable under certain operating conditions.
When in use, they can either emit smoke and/or ignite should the product be defective. It is recommended covering the
surrounding resin with flame-resistant materials or case as needed particularly.
● In the event of troubles of other parts on the circuit such as shortening and opening, provide with proper means for
preventing excessive voltage, current or temperature exceeding the rating from being applied to the film capacitor.
● Prior to use, please make sure that failure of the film capacitors does not have any negative effects on other preventing
electronic circuit components and devices that would possibly cause damage. Proper safety measures should be taken
using fail-safe protective circuit designs to help prevent other devices of becoming unsafe.
Example:
a . State in which basic performance of automobiles (run, turn and stop)
b . False operations
c . Smoke emission/ignitions
● The Film Capacitor listed in this catalog(except for automotive series) are designed and manufactured specifically for
general electronic devices, including audio-video equipment, home appliance, office equipment and data communication
equipment etc.. Accordingly, it is strongly recommended that the user contact us in advance it the parts are to be used for
the following devices(items 1 -12), which require having advanced security measures.
The capacitor for automotive can be used for automobiles such as xEV.
(1) Transport equipment (motor vehicles, airplanes, trains, ships, traffic signal controllers)
(2) Medical equipment (life-support equipment, pacemakers for the heart, dialysis controllers)
(3) Aircraft equipment, Aerospace Equipment (airplanes, artificial satellites, rockets, etc.)
(4) Submarine equipment (submarine repeating equipment, etc.)
(5) Generation control equipment (equipment for atomic/hydraulic/heat power plants)
(6) Information processing equipment (large scale computer system)
(7) Electric heating appliance, Burning apparatus
(8) Rotary motion equipment
(9) Security systems
(10) Robots
(11) Lighting equipment
(12) And any similar types of equipment
● If used in a specific appliance that requires an extremely high reliability directly relating with any life-supporting equipment
like electronic aviation controllers, automotive driving controllers and engine controllers, please consult us and use
within the conditions designated in the specification. However the chip type capacitor should not be used in these
appliances.
Note:
1. Technical information in this catalog is intended to convey examples of typical performances and/or applications,
and is not intended to convey patents rights, if any.
2. For the products, which are controlled items subject to the Foreign Exchange and Foreign Trade Control Law,
the export permission according to the Law is necessary.
3. Note of ozone depleting substances of class1 (ODS) under the Montreal Protocol is used in manufacturing
process of Device Solutions Business Division, Panasonic Industry Co., Ltd.
■ AEC-Q200 compliant
The products are tested based on all or part of the test conditions and methods defined in AEC-Q200.
Please consult with Panasonic for the details of the product specification and specific evaluation test results,
etc., and please review and approve Panasonic's product specification before ordering.
✽ Intellectual property right
We, Panasonic Group are providing the product and service that customers can use without anxiety,
working positively on the protection of our products under intellectual property rights.
Representative patents relating to xEV Film capacitors are as follows :
US Paten
No.7027286, No.8315031, No.8861177, No.9240279, No.10475585
JP Patent No.4784464, No.4930099, No.4946618, No.5391797
15-Dec-20