FP2-X16D2

Partners Home Components Automation Controls Lighting & GPS Downloads Where to Buy Panasonic > Automation Controls Contact News Corporate International Support Live Chat Log In Search... > Products > PLC Programmable Controls > FP2 > Expansion Units PLC Programmable Controls: FP2 Expansion Units Automation Control Products PLC Controls Overview FPe Part Numbers Specifications Expansion Units Dimensions Software FP0R Expansion units for FP2 appear below. FP0 FP? FPX FP2 FP Impulse Controller FPWIN-PRO Software FPWIN-GR Software I/O Units HMI Panels Sensors Laser Markers Servos & Drives UV Curing Systems Machine Vision/ID Products Timers Limit Switches Product name Type FP2 Input Temperature Controllers DC input unit Counters Hour Meters Connection method Number of point Specifications Number 16 points Terminal 12 to 24V DC FP2-X16D2 32 points Connector 24V DC FP2-X32D2 64 points Connector 24V DC FP2-X64D2 6 points Terminal 5 A, 2 points per one common FP2-YR6 16 points Terminal 2 A, 8 points per one common FP2-Y16R 16 points Terminal 0.5 A (12 to 24 V DC), 0.1 A (5 V DC) FP2-Y16T 32 points Connector 0.1A(12 to 24V DC), 50mA (5V DC) FP2-Y32T 64 points Connector 0.1A(12 to 24V DC), 50mA (5V DC) FP2-Y64T 16 points Terminal 0.5 A (12 to 24 V DC), 0.1 A (5 V DC) FP2-Y16P 32 points Connector 0.1A(12 to 24V DC), 50mA (5V DC) FP2-Y32P 64 points Connector 0.1A(12 to 24V DC), 50mA (5V DC) FP2-Y64P Input 24 V DC Output 0.1 A (12 to 24 V DC), 50 mA (5 V DC) FP2XY64D2T Input 24 V DC Output 0.1 A (12 to 24 V DC), 50 mA (5 V DC) with on pulse catch input FP2XY64D7T Input 24 V DC Output 0.1 A (12 to 24 V DC), 50 mA (5 V DC) FP2XY64D2P Input 24 V DC Output 0.1 A (12 to 24 V DC), 50 mA (5 V DC) with on pulse catch input FP2XY64D7P Relay output Power Meters Transistor output FP2 Output unit NPN Transistor output PNP DC input, Transistor output Input 32 points, Output 32 points NPN Connector FP2 I/O mixed unit DC input, Input 32 points, Transistor output PNP Connector Output 32 points Notes: * Pressure welding socket is supplied. A special tool (Part number AXY52000) is needed for connection. * Please purchase separately if you are using a terminal or flat cable socket. ^ Back to top Intelligent Units Analog I/O Unit Product name Specifications Number of I/O points Part Number Channel isolation multi input Voltage range: 1 to 5V, -10 to +10V, -100 to +100mV Resolution: 1/13017(1 to 50V) to 1/65536(Others) Thermocouple: S, J, K, T, R, N type R.T.D.: Pt100, JPt100, Pt1000 FP2 Analog Input unit FP2-AD8X Analog input: 8 ch. R.T.D. input R.T.D.: Pt100, JPt100, Pt1000 FP2-RTD Voltage/Current input Voltage range: 1 to +5 V, -10 to +10V Current range: 4 to 20 mA, -20 to +20mA Resolution: 1/13107 (1 to 5 V, 4 to 20mA) to 1/65536(Others) Voltage range: -10 to +10 V FP2 Analog Output unit Current range: 0 to 20 mA FP2-AD8 Analog output: 4 ch. Resolution: 1/4096 FP2-DA4 ^ Back to top Positioning control and Calculation units Specifications Product name Output type Speed command Number of axes controlled 2 axes, independent Transistor FP2 Positioning unit Multifunction type note 1) 4 axes, independent 2 axes, independent Line driver 4 axes, independent FP2 Positioning unit RTEX FP2 High-speed counter unit FP2 Pulse I/O unit Part Number 1pps to 500kpps FP2-PP21 1pps to 4Mpps FP2-PP22 FP2-PP41 FP2-PP42 2 axes unit FP2-PN2AN 4 axes unit FP2-PN4AN 8 axes unit FP2-PN8AN Dedicated software toolConfigurator PM (English) AFPS66510 8 interrupt inputs 4 -channel high -speed counter 8 comparison outputs Input: 24 NPN output V DC Output: 5 to 24 V DC (0.1 A, 12 points/0.8 A, 4 points) PNP output FP2-HSCT 8 interrupt inputs 4 -channel high -speed counter 8 comparison outputs 4 pulse output channels 4 PWM output channels Input: 24 V DC Output: 5 to 24 V DC (0.1 A, 12 points/0.8 A, 4 points) NPN output FP2-PXYT PNP output FP2-PXYP FP2-HSCP Notes: 1) Previous FP2 positioning units AFP2430 (FP2 -PP2) and AFP2431 (FP2 - PP4) are not compatible with the multi-function type FP2 positioning unit.Please contact us. * Pressure welding socket is supplied. A special tool (part no. AXY52000) is needed for connection. Please purchase separately if you are using a terminal or flat cable socket. * Please refer to "FP SIGMA Product Types" for Motor driver I/F terminal II. ^ Back to top Link/Communication Units Serial Communication/Network Units Product name Part Number Specifications FP2 Multi communication unit Communication block Selectable combination of two interfaces from RS232C/RS422/RS485 detachable serial communication block. FP2-MCU RS232C FP2-CB232 RS422 FP2-CB422 RS485 FP2-CB485 Notes: * FP2 Muti Communication Unit cannot be used alone. Use it with FP2 communication block. ^ Back to top Unit for Serial data controls Product name FP2 Serial data unit Number of channel Specifications The unit can communicate with RS232C device. The serial input/output is executed by sequence instruction. 2 ch. Part Number FP2-SDU Notes: * For wiring, use the accompanying D-SUB connector or a separately sold cable. ^ Back to top Unit for Display panel and Computer interface Product name Number of channel Specifications FP2 Computer communication unit The unit can communicate with a computer in 1: 1 communication. RS232C×2 channels The unit can also be connected with operation display panel. 2 ch. Part Number FP2-CCU Notes: * For wiring, use the accompanying D-SUB connector or a separately sold cable. ^ Back to top Link-related units and software Product name Part Number Specifications FP2 Multi-wire link unit Can connect as the remote I/O system MEWNET -F master station. Perfect for remote I/O systems using many points FP2-MW Direct connection to SUNX Co., Ltd., S-LINK reduced -wiring system CPU unit with 128 points × 1 channel FP2-SL2 FP2 ET-LAN unit Ethernet link unit for FP2/FP2SH Installed on CPU backplane. FP2-ET1 Control Configurater ET ET-LAN unit setting software AFPS32510 FP2 S-Link unit ^ Back to top Backplane Product name Specifications FP2 Backplane Part Number 5-module type (for basic) FP2-BP05 7-module type (for basic and expansion) FP2-BP07 9-module type (for basic and expansion) FP2-BP09 12-module type (for basic and expansion) FP2-BP12 14-module type (for basic and expansion) FP2-BP14 11-module type (for basic) FP2-BP11MH 10-module type (for expansion) FP2-BP10EH 0.6m FP2-EC 2m FP2-EC2 FP2 Backplane H type. FP2 Expansion cable ^ Back to top Power Supply Unit Product name Specifications Part Number Input: 100 to 120 V AC, Output: 2.5 A FP2-PSA1 Input: 200 to 240 V AC, Output: 2.5 A FP2-PSA2 FP2 Power supply unit Input: 100 to 240 V AC, Output: 5 A FP2-PSA3 Input: 24 V DC, Output: 5 A FP2-PSD2 ^ Back to top Optional memories For FP2 Functions Product name Part Number Functions Expansion memory unit F-ROM EP-ROM Clock/Calendar Expansion RAM ROM socket Available Available Not available Not available FP2-EM1 Available Available Available Not available FP2-EM2 Available Available Available Available FP2-EM3 Not available Not available Available Available FP2-EM6 Not available Not available Not available Available FP2-EM7 FLASH-ROM for program copy and ROM operation Equivalent to SST-29EE010 -120-4C-PH Enables writing with the programming tool when attached to the CPU unit. FP2-EM4 EP-ROM for program storage and ROM operation Equivalent to M27C1001 -12F1 A commercially available ROM writer is required. FP2-EM5 ^ Back to top For FP2SH Product name Expansion memory unit ROM for FP2SH standard type CPU unit Socket for fitting ROM to the CPU unit FP2-EM7 FLASH-ROM for program copy and ROM operation Equivalent to SST-29EE020 -150-4C-PH Enables writing with the programming tool when attached to the CPU unit. AFP5208 EP-ROM EP-ROM for program storage and ROM operation Equivalent to M27C2001 -150F1 A commercially available ROM writer is required. AFP5209 F-ROM Backup unnecessary. Perfect for program memory Used for readout when using data memory. AIC50020 SRAM Perfect for data memory Can also be used for program backup. Battery backups. AIC52000 F-ROM IC memory card (Small PC card) for FP2SH CPU unit with IC memory card interface Part Number Specifications ^ Back to top Home Components Automation Controls Lighting & GPS Downloads Where to Buy News Support Copyright © 2010 Panasonic Electric Works Corporation of America, All Rights Reserved. Phone: 1.908.464.3550 Fax: 1.908.464.4128 Partners Corporate Privacy