FT-43

Square Head Fiber FT-R□ / FD-R□ NEW Reflective Spot Lens FX-MR7 / FX-MR8 / FX-MR9 Delivering super-high-precision detection with 3 times more light received and 1.3 times the S/N ratio! (compared to previous models) Finest spot lens FX-MR7 M3 fiber FX-MR8 ø0.4 to ø3.5 mm ø0.016 to ø0.138 in Variable spot light 2013.07 panasonic.net/id/pidsx/global M3 fiber FX-MR7 ø0.1 mm ø0.004 in Finest spot light M3 fiber FX-MR9 ø4 mm ø0.157 in Parallel light The product line includes three lenses for chip component detection applications: a finest spot lens, a zoom lens, and a parallel light lens. Featuring an extensive selection of spot diameters and the ability to save space when used with square head fiber Products accommodate a variety of target objects with different shapes, colors, and surface characteristics. Application: Detection of chip component orientation and direction Combination with FX-MR7 ø0.1 mm ø0.004 in : FD-R33EG ø0.15 mm ø0.006 in : FD-R34EG ø0.2 mm ø0.008 in : FD-R32EG ø0.4 mm ø0.016 in : FD-R31G Fiber • M3 coaxial reflective type 1 Lens for M3 fiber • Finest spot : FX-MR7 • Variable spot : FX-MR8 2 Detection of orientation Detection of orientation 0.6mm 0.024 in Left Top Bottom 0.3 mm 0.012 in Right Application: Verification of chip component supply quantity As seen from above Parallel light lens : FX-MR9 Chip component Spot light Finest spot lens FX-MR7 Parallel light lens FX-MR9 About 3 times more light received (compared to previous models) Long-range parallel light Since there is a large difference in the amount of light received in applications such as direction detection, it is easy to set a threshold that will allow stable detection. Additionally, these products offer an S/N ratio that is 1.3 times better than previous models. Depending on the fiber with which it is used, this lens creates parallel light with a spot diameter of approximately ø4 mm ø0.157 in at a sensing range of 0 to 30 mm 0 to 1.181 in. All models Typical FX-501 performance (STD mode) White Black FX-MR7 + FD-R33EG 3,200 digits 1,030 digits FX-MR6 (compared to previous models) + FD-R33EG 1,000 digits 435 digits Zoom lens FX-MR8 Tightening torque 5 times (compared to previous models) The standard aluminum body has been changed to stainless steel (SUS 303) to reduce the likelihood of damage from over-tightening. All models Variable spot diameter Standard lens outer diameter of ø4.3 mm (ø0.169 in) Spot diameters ranging from ø0.4 to ø3.5 mm ø0.016 to ø0.138 in can be achieved by combining the lens with a variety of fibers. Use of the same mounting hardware across the product line means less inventory and lower costs. New square head fiber models for the Tough Series (break-free and bendable*) * These fibers provide a combination of break-free (10 million times bending durability [typical value, when bent back and forth at 180° with a bending radius of R10 mm R0.394 in]) and bendable (bending radius of R2 to R4 mm R0.079 to R0.157 in) characteristics. Compact, space-saving Compact installation Fiber can be installed at a minimum pitch of M3: 6.5 mm 0.256 in or M4: 8.5 mm 0.335 in using needle-nose pliers. Square head fiber heads can be installed cleanly on the side of a conveyor belt. The design makes it less likely for tools and other objects to catch on the fiber cable during installation. Wrench Standard fiber FT-R□ / FD-R□ Needle-nose pliers Tools and other objects can catch on the fiber cable. 3.5 mm 0.138 in Clean installation! Space is required. Extensive selection of product variants We offer an extensive selection of variants representing a total of seven models. The FD-□EG features higher coaxial precision for increased precision when used with lenses. Thru-beam type: 2 models Reflective type: 5 models M4 : FT-R43 M3 : FT-R31 M4 : FD-R41 M3: FD-R31G FD-R32EG FD-R34EG FD-R33EG (Fiber core : ø0.5 mm ø0.020 in) (Fiber core : ø0.25 mm ø0.010 in) (Fiber core : ø0.175 mm ø0.007 in) (Fiber core : ø0.125 mm ø0.005 in) Use for long-range sensing or spot detection by attaching a lens Thru-beam type fibers Sensing range 3,600 mm 141.732 in (Note 1, 2) With a longrange lens Advantages of using a lens • Narrow beam • Long-range sensing capability • Increased thru-beam capability Lens (For thru-beam type fiber) Sensing range Beam axis (mm in) (Note 1) dia. (mm in) [Lens on both sides] Lens Designation 3,600 141.732 ø3.6 ø0.142 Expansion lens (Note 2) ø9.8 ø0.386 Super-expansion lens 950 37.402 Applicable fiber Model No. Model No. FX-LE1 FX-LE2 FT-R43 FX-SV1 ø2.8 ø0.110 Side-view lens Notes: 1) The sensing ranges are the values when used in combination with an FX-500 series amplifier (in STD mode). 2) The fiber cable length practically limits the sensing range. Introducing square R1 mm (R0.039 in) (sharp bending) fiber We now offer a sharp bending fiber featuring a low level of light fluctuations, even when bent at R1 mm R0.039 in. It is also available with a lens capable of long-range sensing. FT-R41W FT-R42W FT-R42W (With lens) R1 mm R0.039 in Lens Fiber head • Resistant to dust and particulate matter. • Tip dimensions can be shortened. Semi-custom fibers that flexibly meet diverse needs Custom-ordered products are available with different fiber lengths and sleeve lengths in order to respond quickly to different requirements. Contact your nearest our office for details on model numbers, standard prices and delivery periods. ORDER GUIDE Type (mm in) M3 M3 W5.5 × H8 × D16 W0.217 × H0.315 × D0.630 Lens mountable Thru-beam M4 Model No. M4 W7 × H9 × D13.5 W0.276 × H0.354 × D0.531 M4 W7 × H9 × D13.9 W0.276 × H0.354 × D0.547 With expansion lens M4 Square head W7 × H9 × D14.4 W0.276 × H0.354 × D0.566 Coaxial, lens mountable M3 M3 W5.5 × H8 × D16 W0.217 × H0.315 × D0.630 Coaxial, lens mountable M3 W5.5 × H8 × D16 W0.217 × H0.315 × D0.630 Coaxial, lens mountable M3 W5.5 × H8 × D16 W0.217 × H0.315 × D0.630 Coaxial, lens mountable M3 W5.5 × H8 × D16 W0.217 × H0.315 × D0.630 M4 M4 W7 × H9 × D13.5 W0.276 × H0.354 × D0.531 Bending radius Fiber cable length : Free-cut R2 mm R0.079 in  FT-R31 R4 mm R0.157 in Bending durability  FT-R41W 2m 6.562 ft R1 mm R0.039 in  FT-R42W  FD-R31G R2 mm R0.079 in Bending durability  FD-R32EG 500 mm 1.640 ft R4 mm R0.157 in  FD-R34EG  FD-R33EG  FD-R41 FX-500 series STD 270 10.630 HYPR   1,000 39.370 STD   720 28.346 HYPR 3,000 118.110 STD   800 31.496 HYPR 3,200 125.984 STD 2,200 86.614 HYPR (Note   3)  3,600 141.732 STD  170 6.693 HYPR   530 20.866 STD   45 1.772 HYPR  170 6.693 STD   38 1.496 HYPR   130 5.118 STD   19 0.748 HYPR   84 3.307 STD  210 8.268 HYPR   710 27.953   Bending durability  FT-R43 Sensing range (mm in) (Note 1, 2) R2 mm R0.079 in 2m Bending durability 6.562 ft U-LG LONG FAST H-SP 580 22.835 440 17.323 160 6.299 55 2.165 1,600 62.992 1,100 43.307 430 16.929 130 5.118 1,800 70.866 1,400 55.118 460 18.110 150 5.906 3,600 141.732 (Note 3) 3,500 137.795 1,300 51.181 460 18.110 310 12.205 260 10.236 85 3.346 27 1.063 110 4.331 92 3.622 30 1.181 9 0.354 90 3.543 70 2.756 23 0.906 7 0.276 44 1.732 33 1.299 11 0.433 3 0.118 430 16.929 320 12.598 100 3.937 34 1.339 FX-101 (Upper value) FX-102 (Lower value) 100 3.937 340 13.386 210 8.268 640 25.197 250 9.843 710 27.953 510 20.079 2,000 78.740 45 1.772 150 5.906 20 0.787 68 2.677 17 0.669 60 2.362 7 0.276 22 0.866 60 2.362 170 6.693 Beam axis (Fiber core) Ambient Protection dia. temp. (mm in) ø0.5 ø0.020 IP67 −55 to +80 °C −67 to +176 °F IP40 −40 to +60 °C −40 to +140 °F ø1 ø0.039 ø2.2 ø0.087 Emitter ø0.5 ø0.020 −55 to +80 °C −67 to +176 °F Emitter ø0.25 ø0.010 −40 to +70 °C −40 to +158 °F IP40 Emitter ø0.175 ø0.007 −20 to +60 °C −4 to +140 °F Emitter ø0.125 ø0.005 ø0.75 ø0.030 IP67 −55 to +80 °C −67 to +176 °F Notes: : R0.394 in) and bendable (bending radius of R4 mm R0.157 in or less) characteristics. Lens (For M3 Fiber) Spot diameter (mm in) Type Lens Shape Model No. (mm in) Distance to focal point (mm in) Shape ø0.1 ø0.004 approx. ø0.15 ø0.006 approx. ø0.2 ø0.008 approx. Finest spot lens 7 ± 0.5 0.276 ± 0.020 ø5 ø0.197 15.3 0.209 FX-MR7 ø0.4 ø0.016 approx. Spot diameter (mm in) Type ø0.4 to ø2.2 ø0.016 to ø0.087 approx. 10 to 30 ø5 ø0.197 ø0.5 to ø2.5 ø0.020 to ø0.098 approx. 0.394 to1.181 15 0.591 FX-MR8 ø0.8 to ø3.5 ø0.031 to ø0.138 approx. Parallel light lens 2013.07 ø4.0 ø0.157 approx. 0 to 30 0 to 1.181 10 0.394 ø5 ø0.197 panasonic.net/id/pidsx/global FX-MR9 Model No. ø0.125 ø0.005 FD-R33EG ø0.125 ø0.005 FD-EG31 ø0.175 ø0.007 FD-R34EG ø0.25 ø0.010 FD-R32EG ø0.25 ø0.010 FD-EG30 ø0.5 ø0.020 FD-R31G ø0.5 ø0.020 FD-32G ø0.5 ø0.020 FD-32GX ø0.5 ø0.020 FD-42G ø0.5 ø0.020 FD-42GW Lens Shape Model No. Emitting (mm in) core (mm in) Sensing range (mm in) ø0.4 to ø2.0 ø0.016 to ø0.079 approx. Zoom lens Fiber Emitting core (mm in) Model No. ø0.125 ø0.005 FD-R33EG, FD-EG31 ø0.175 ø0.007 FD-R34EG ø0.25 ø0.010 FD-R32EG, FD-EG30 ø0.5 ø0.020 FD-R31G, FD-32G, FD-32GX, FD-42G, FD-42GW ø0.125 ø0.005 FD-R33EG, FD-EG31 ø0.175 ø0.007 FD-R34EG ø0.25 ø0.010 FD-R32EG, FD-EG30 ø0.5 ø0.020 FD-R31G, FD-32G, FD-32GX, FD-42G, FD-42GW Panasonic Industrial Devices SUNX Co., Ltd. Global Sales Department No. PCE-FXMR July, 2013 2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan Telephone: +81-568-33-7861 Facsimile: +81-568-33-8591 All Rights Reserved ©Panasonic Industrial Devices SUNX Co., Ltd. 2013 ■ ■