FT-KV40

ョㄊ㄃ㄆㄓチヴㄆㄏㄔㄐㄓチヨㄖㄊㄅㄆチャㄐㄐㄌ ビパヒヒハヒパチチチㄑ㄂ㄏ㄂ㄔㄐㄏㄊ㄄ノㄆㄍㄆ㄄ㄕㄓㄊ㄄ノㄘㄐㄓㄌㄔハㄏㄆㄕバㄔㄖㄏㄙ INDEX Fiber Selection Guide Choose by model Choose by shape/application 3 Viewing new models 4 New Product Introduction Tough Fiber Fibers 6 Super Quality 8 Threaded Type 10 Cylindrical Type 12 Sleeve 14 Flat Type 16 Small Spot 18 Narrow Beam 19 Wide Beam 20 Convergent e ective Type etrore ective Type mpli ers 21 22 Chemical-resistant 23 Heat-resistant 24 Vacuum-resistant 26 Liquid Leak / Liquid Detection 28 Fiber Options Fiber Dimensions 2 30 Thru-beam Type 34 etrore ective Type 41 e ective Type 42 Others 51 FX-500 series 56 FX-100 series 66 INDEX 76 Earlier Models Comparison Table 80 GENERAL TERMS AND CONDITIONS Please read this document carefully with respect to our product warranty policy before using our Panasonic Electric Works SUNX products (“Products”). If you have any questions or comments regarding do’s and don’ts of the Products, please consult your local Panasonic Electric Works SUNX authorized dealer for the correct use and application of the Products. 1. PRODUCT MODIFICATION & DISCONTINUANCE: Panasonic Electric Works SUNX expressly reserves the right to modify, including the right to discontinue, any of the Products, prior to their order, from time to time without notice. 2. WARRANTIES: (1) Subject to the exclusions stated in 3 (EXCLUSIONS) herein below, Panasonic Electric Works SUNX warrants the Products to be free of defects in material and workmanship for a period of one (1) year from the date of shipment under normal usage in environments commonly found in manufacturing industry. (2) Any Products found to be defective must be shipped to Panasonic Electric Works SUNX with all shipping costs paid by Purchaser or offered to Panasonic Electric Works SUNX for inspection and examination. Upon examination by Panasonic Electric Works SUNX, Panasonic Electric Works SUNX will, at its sole discretion, repair or replace at no charge, or refund the purchase price of, any Products found to be defective. 3. EXCLUSIONS (1) This warranty does not apply to defects resulting from any cause: (i) which was due to abuse, misuse, mishandling, improper installation, improper interfacing, or improper repair by Purchaser; (ii) which was due to unauthorized modification by Purchaser, in part or in whole, whether in structure, performance or specification; (iii) which was not discoverable by a person with the state-of-the-art scientific and technical knowledge at the time of manufacture; (iv) which was due to an operation or use by Purchaser outside of the limits of operation or environment specified by Panasonic Electric Works SUNX; (v) which was due to Force Majeure; and (vi) which was due to any use or application expressly discouraged by Panasonic Electric Works SUNX in 5 (CAUTIONS FOR SAFE USE) hereunder. (2) This warranty extends only to the first purchaser for application, and is not transferable to any person or entity which purchased from such purchaser for application. (3) The performance data presented in this catalogue is only for guidance and shall not constitute any performance warranty by Panasonic Electric Works SUNX. 4. DISCLAIMERS (1) Panasonic Electric Works SUNX’s sole obligation and liability under this warranty is limited to the repair or replacement, or refund of the purchase price, of a defective Product, at Panasonic Electric Works SUNX’s option. (2) THE REPAIR, REPLACEMENT, OR REFUND IS THE EXCLUSIVE REMEDY OF THE PURCHASER, AND ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF PROPRIETARY RIGHTS, ARE HEREBY EXPRESSLY DISCLAIMED. IN NO EVENT SHALL PANASONIC ELECTRIC WORKS SUNX AND ITS AFFILIATED ENTITIES BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCTS, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANY DAMANGES RESULTING FROM LOSS OF USE, BUSINESS INTERRUPTION, LOSS OF INFORMATION, LOSS OR INACCURACY OF DATA, LOSS OF PROFITS, LOSS OF SAVINGS, THE COST OF PROCUREMENT OF SUBSTITUTED GOODS, SERVICES OR TECHNOLOGIES, OR FOR ANY MATTER ARISING OUT OF OR IN CONNECTION WITH THE USE OR INABILITY TO USE THE PRODUCTS. 5. CAUTIONS FOR SAFE USE (1) The applications shown in this catalogue are only suggestions, and it is Purchaser’s sole responsibility to ascertain the fitness and suitability of the Products for any particular application, as well as to abide by Purchaser’s applicable local laws and regulations, if any. (2) Never use the Products NOT rated or designated as “SAFETY SENSOR” in any application involving risk to life or property. When such a use is made by Purchaser, such Purchaser shall indemnify and hold harmless Panasonic Electric Works SUNX from any liability or damage whatsoever arising out of or in relation to such use. (3) In incorporating the Products to any equipment, facilities or systems, it is highly recommended to employ fail-safe designs, including but not limited to a redundant design, flame propagation prevention design, and malfunction prevention design so as not to cause any risk of bodily injury, fire accident, or social damage due to any failure of such equipment, facilities or systems. (4) The Products are each intended for use only in environments commonly found in manufacturing industry, and, unless expressly allowed in this catalogue, specification or otherwise, shall not be used in, or incorporated into, any equipment, facilities or systems, such as those: (a) which are used for the protection of human life or body parts; (b) which are used outdoors or in environments subject to any likelihood of chemical contamination or electromagnetic influence; (c) which are likely to be used beyond the limits of operations or environments specified by Panasonic Electric Works SUNX in this catalogue or otherwise; (d) which may cause risk to life or property, such as nuclear energy control equipment, transportation equipment (whether on rail or land, or in air or at sea), and medical equipment; (e) which are operated continuously each day for 24 hours; and (f) which otherwise require a high level of safety performance similar to that required in those equipment, facilities or systems as listed in (a) through (e) above. 6. EXPORT CONTROL LAWS In some jurisdictions, the Products may be subject to local export laws and regulations. If any diversion or re-export is to be made, Purchaser is advised to abide by such local export laws and regulations, if any, at its own responsibility. 7. PURCHASER’S TRASFER OBLIGATIONS If Purchaser resell or deliver the Products to a third party, Purchaser must provide such third party with a copy of this document, all specifications, manuals, catalogs, leaflets and written information of any kind provided to Purchaser by Panasonic Electric Works SUNX or its authorized local representative from time to time regarding the Products. 2 New product introduction 7RXJK Fiber Fiber Selection Guide Choose by model 5HWURUHÀHFWLYHW\SH Thru-beam type Fiber Selection Guide Choose by model Choose by shape/ application 9LHZLQJ new models Fibers Super Quality Threaded Type Cylindrical Type 6OHHYH Flat Type Small Spot Narrow Beam Wide Beam &RQYHUJHQW 5HIOHFWLYH Type 5HWURUHIOHFWLYH Type Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions Thru-beam Type 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table Page Model No. FT-140 FT-30 FT-31 FT-31S FT-31W FT-40 FT-42 FT-42S FT-42W FT-43 FT-45X FT-A11 FT-A11W FT-A32 FT-A32W FT-AL05 FT-E13 FT-E23 FT-F93 FT-H13-FM2 FT-H20-J20-S FT-H20-J30-S FT-H20-J50-S FT-H20-M1 FT-H20-VJ50-S FT-H20-VJ80-S FT-H20W-M1 FT-H30-M1V-S FT-H35-M2 FT-H35-M2S6 FT-HL80Y FT-KS40 FT-KV26 FT-KV40 FT-KV40W FT-L80Y FT-R40 FT-R41W FT-R42W FT-S11 FT-S20 FT-S21 FT-S21W FT-S30 FT-S31W FT-S32 FT-V23 FT-V24W FT-V25 FT-V30 FT-V40 FT-V80Y FT-WZ4 FT-WZ7 FT-Z20HBW FT-Z30 FT-Z30E Page Sensing range Dimensions Speci cations P.10 P.9 P.10 P.15 P.10 P.9 P.10 P.15 P.34 Model No. FT-Z30EW FT-Z30H FT-Z30HW FT-Z30W FT-Z40HBW FT-Z802Y Page Sensing range Dimensions Speci cations P.39 P.16 P.40 Model No. FR-KZ22E FR-KZ50E FR-KZ50H FR-Z50HW Sensing range Dimensions Speci cations P.19/P.22 P.41 P.23 P.10 P.20 P.35 5HÀHFWLYHW\SH Page P.12/P.15 Model No. P.28 P.24 P.36 P.26 P.24 P.23 P.19 P.23 P.37 P.10 P.12 P.9 P.12 P.9 P.12 P.38 P.15 P.12 P.23 P.39 P.16 FD-30 FD-31 FD-31W FD-32G FD-32GX FD-40 FD-41 FD-41S FD-41SW FD-41W FD-42G FD-42GW FD-60 FD-61 FD-61G FD-61S FD-61W FD-62 FD-64X FD-A16 FD-AL11 FD-E13 FD-E23 FD-EG30 FD-EG30S FD-EG31 FD-F4 FD-F41 FD-F41Y FD-F71 FD-F8Y FD-FA93 FD-H13-FM2 FD-H18-L31 FD-H20-21 FD-H20-M1 Page Sensing range Dimensions Speci cations P.9 P.11 P.11/P.18 P.9 P.11 P.42 P.15 P.11 P.11/P.18 P.9 P.11 P.43 P.15 P.11 P.20 P.44 P.13/P.15 P.11/P.18 P.15 P.11/P.18 P.45 P.28 P.25 P.46 Model No. FD-H25-L43 FD-H25-L45 FD-H30-KZ1V-S FD-H30-L32 FD-H30-L32V-S FD-H35-20S FD-H35-M2 FD-H35-M2S6 FD-HF40Y FD-L10 FD-L11 FD-L12W FD-L20H FD-L21 FD-L21W FD-L22A FD-L23 FD-L30A FD-L31A FD-L32H FD-R60 FD-S21 FD-S30 FD-S31 FD-S32 FD-S32W FD-S33GW FD-V30 FD-V30W FD-V50 FD-WZ4 FD-WZ7 FD-Z20HBW FD-Z40HBW FD-Z50HW Sensing range Dimensions Speci cations P.25 P.46 P.26 P.25 P.26 P.47 P.25 P.28 P.21 P.11 P.13 P.9 P.48 P.49 P.13 P.15 P.50 P.17 P.19 3 Fiber Selection Guide New product introduction 7RXJK Fiber Choose by quality Choose by shape Super Quality S Threaded Type T Cylindrical Type C The variance of beam intensity and beam axis is extremely small. Standard type which is mounted using nuts. Has a slender shape that is mounted using set screws. 6 6OHHYH Flat Type Suitable for sensing in narrow locations and sensing minute ob ects. Thin and rectangular shape. Installed directly in narrow locations with screws. Fiber Selection Guide Choose by model Choose by shape/ application 9LHZLQJ new models Fibers Super Quality P.8 P.10 P.12 P.14 P.16 Threaded Type Cylindrical Type Choose by beam shape Small Spot S Senses minute ob ects using a spot lens. Narrow Beam Not easily affected by surrounding obstacles. 6OHHYH & &RQYHUJHQW 5HIOHFWLYH7\SH 5 Wide Beam W Senses in the beam band without missing a work. Senses in the limited range only. 5 5HWURUHIOHFWLYH7\SH Ideal for sensing transparent ob ects Flat Type Small Spot Narrow Beam Wide Beam &RQYHUJHQW 5HIOHFWLYH Type 5HWURUHIOHFWLYH Type Chemicalresistant Heatresistant P.18 P.19 P.20 P.21 P.22 &KRRVHE\HQYLURQPHQWSHUIRUPDQFH C Chemical-resistant Heat-resistant Various kinds of liquids can be detected due to the uorine contained resin case Withstands at -60 °C -76 °F to 350 °C 662 °F V Vacuum-resistant Usable in hightemperatures of 300 °C 572 °F and vacuum Vacuumresistant Liquid Leak / Liquid Detection Fiber Options L Liquid Leak / Liquid Detection L Corresponds to various liquid events. Fiber Dimensions Thru-beam Type 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type Others P.23 P.24 P.26 Amplifiers P.28 FX-500 series FX-100 series )LEHUDPSOL¿HUVJXLGDQFH Digital fiber sensor FX-500 series Digital fiber sensor FX-100 series t the industry s leading edge INDEX Super functionality yet economical price Earlier models comparison table P.56 P.66 4 New product introduction 7RXJK Fiber Fiber Selection Guide 9LHZLQJQHZPRGHOV pplies to the ber marked Fiber Selection Guide Choose by model Choose by shape/ application 9LHZLQJ new models Fibers Super Quality Threaded Type F Series Name - in the model name eld P.8~P.29 *1 Type Shape etc. Symbol Details T Thru-beam type D e ective type R etrore ective type Functions/Features Symbol None G S H E HB A Cylindrical Type 6OHHYH Flat Type * Small Spot *1 Excluding liquid leak / liquid detection ber Details General-purpose Coaxial re ective Sleeve Top sensing * Side sensing * Top sensing Bent * lignment is for Flat type Z and KZ only Narrow Beam Wide Beam &RQYHUJHQW 5HIOHFWLYH Type 5HWURUHIOHFWLYH Type Symbol Chemicalresistant Heatresistant None Vacuumresistant Liquid Leak / Liquid Detection Fiber Options R S KS Fiber Dimensions V Thru-beam Type 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type KV E Others EG Amplifiers Z FX-500 series FX-100 series KZ A INDEX Earlier models comparison table AL L F Lead No. 3 4 Treaded type 6 14 4 Elbow or square head 6 1 2 Cylindrical type 3 Narrow beam 4 2 3 Side-view 4 5 4 Narrow beam / Side-view 2 1 Ultra small diameter 2 Coaxial 3 2 3 Flat type 4 5 2 Narrow beam 5 3 Wide beam 1 1 rray 0 1 2 Convergent re ective type 3 9 Liquid leak / Liquid detection 7 Details Details M3 M4 M6 M14 M4 M6 ø1 mm ø1.5 mm ø2.5 or ø3 mm ø3.7 mm ø2 mm ø2.5 or ø3 mm ø4 mm ø5 mm ø4 mm 1.5 × 2 mm Fiber ø0.125 mm Fiber ø0.25 mm M3 Thickness 2 mm Thickness 3 mm Thickness 3.5 mm Thickness 5.2 mm Thickness 2.2 mm Thickness 5.2 mm Sensing width 32 mm Sensing width 10 to 19 mm Sensing width 11.1 mm Sensing width 5.5 mm Sensing range 0 to 10 mm STD Sensing range 11 to 30 mm STD Sensing range 31mm or more STD Mountable on pipe Liquid leak Symbol None W X Y Details General-purpose Sharp bending Stainless- acketed Chemical-resistant 5 6 New product introduction Tough Fiber Fiber Selection Guide Choose by model Tough Fiber Conventional 3 types y ro rolled lled into 1 !! New standard fiber Choose by shape/ application Viewing new models Flexible fiber Fibers Super Quality Threaded Type Cylindrical Type Flexible durability 1 million times 6OHHYH Flat Type Small Spot Narrow Beam Wide Beam &RQYHUJHQW 5HIOHFWLYH Type Sharp bending fiber Bending radius R2 ~R1 mm Tough Fiber Break-free Flexible durability 10 million times (Typical) Bending conditions Bending radius: R10 mm Reciprocating bending: 180° More flexible ~R4 Bending radius R2 mm 5HWURUHIOHFWLYH Type Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions General purpose fiber Bending radius R25mm ed gs are us steel fittin ls. e d o m ll Stainless head of a r e b fi e for th s to RoHS tery nform Clearly co d for secondary bat se u th e g b n re an st C mounting Improved Thru-beam Type 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table ,QWURGXFLQJDWRXJK¿EHUWKDW transcends common knowledge! It has toughness that can be used in moving parts, toughness that can be bent with precision, and high-quality for all purposes. It changes common knowledge about bers. 7 Break-free New product introduction Tough Fiber Flexible durability 10 million times Fiber Selection Guide Choose by model Choose by shape/ application (Typical) Bending conditions Bending radius: R10 mm R0.394 in, Reciprocating bending: 180° Viewing new models Fibers More flexible Ex) FT-31 Super Quality Threaded Type R2 to R4 mm R0.079 to R0.157 in Cylindrical Type Ex) FT-42 6OHHYH Flat Type R R2 mm R0.079 in M3 M4 R4 mm R0.157 in Small Spot R Narrow Beam Wide Beam &RQYHUJHQW 5HIOHFWLYH Type Ø2.2 mm Ø0.087 in Ø1 mm Ø0.039 in 5HWURUHIOHFWLYH Type Chemicalresistant Heatresistant Vacuumresistant Reduced the time for selecting fiber and registration numbers For Designers rs High-q uality ƔHigh-quality in whichever tough fiber you choose! Ɣ Easy selection! Ɣ Reduced risk of breaking and bending during installation! Fo For Buyers Low P Liquid Leak / Liquid Detection Fiber Options rice ƔCost savings! ƔReduced registration numbers! Ɣ Reduced frequency of maintenance stockpiling and replacement! Fiber Dimensions Thru-beam Type 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type Others Amplifiers 5HGXFHGYDULDWLRQLQVHQVLQJ FX-500 series FX-100 series Beams at the ber aperture are uniform, leading to stable sensing. Previous exible ber Previous sharp Generally exible bers and bending ber sharp bending bers are composed of multiple ber cores, often resulting in large variations in light intensity. New ber The new standard ber is composed of a single ber core, achieving uniform light intensity. ƔUniform and highly accurate sensing Ɣ6WDEOHVHQVLQJHYHQLIWKH¿EHULVEHQW INDEX Earlier models comparison table 8 New product introduction Tough Fiber Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Fibers Super Quality Threaded Type Cylindrical Type 6OHHYH Super Quality It is a ber with superior light intensity stability and simple digital management when combined with the FX-500 series ampli er. It offers stable sensing with an extremely small beam axis curvature and gap. FT-40 Digital management is simple due to small differences in body. When combined with the FX-500 series ampli ers, it has up to 4 times improved stability of incident light intensity compared with traditional bers. Management is simple even when replacing ampli ers because the digital display shows the approximate value. Super quality fiber FX-500 series “Stabilized incident light intensities” even in multiple units Flat Type Small Spot Narrow Beam Wide Beam &RQYHUJHQW 5HIOHFWLYH Type 5HWURUHIOHFWLYH Type Chemicalresistant Emitter intensity is also stable due to few curvatures and gaps in the beam axis. Heatresistant Liquid Leak / Liquid Detection Variation in emission intensity of the ber core is controlled down to less than 10 , achieving a stable detection. Beam axis deviation: Thru-beam type within 2°, Re ective type within 3° Beam axis centering precision: within 150 μm Fiber Options Single core standard ber with high exibility Expanded temperature range Fiber Dimensions Thru-beam Type mbient temperature 40 to 70 °C 40 to 158 °F in previous 5HÀHFWLYH Type –55 to +80 °C –67 to +176 °F Others Integrated high-precision plug 5HWURUHÀHFWLYH Type Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table ø2.2 mm ø0.087 inVWDQGDUG¿EHU 1.2 times more than previous The centering precision of the ber core attached to the inserting plug is doubled. s the insertion precision is increased, the variation among units can be greatly suppressed. Centering precision: within 40 μm Previous Stable emission intensity within ±10 % New material Vacuumresistant In general, high- exibility types adopt a multi- ber core which may result in large variation in light emission. 0RUHÀH[LEOH R4 Bending radius Previous is R25 mm R0.984 in R4 mm R0.157 in 1/6 of that of previous 0RUHEHQGDEOH Bending durability Previous is 1,000 times 10 million times 10,000 times more than previous *Bending conditions Bending radius: R10 mm R0.39 in, Reciprocating bending 180° 9 New product introduction Tough Fiber Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Thru-beam type (one pair set) M3 M3 Model No. 7RXJK FT-30 12 M4 M4 Threaded Type Shape of ber head (mm) 7RXJK FT-40 ø1 5 ø1.5 7RXJK FT-S20 10 ø3 ø3 Cylindrical 15 7RXJK FT-S30 10 Fibers Fiber Bending cable radius length : (mm) Free-cut R2 Bending durability R4 Bending durability 2m R2 Bending durability R4 Bending durability Sensing range (mm in) FX-500 series STD 400 15.748 HYPR 1,350 53.150 STD 1,200 47.244 HYPR (Note) 3,600 141.732 STD 400 15.748 HYPR 1,350 53.150 STD 1,200 47.244 HYPR (Note) 3,600 141.732 U-LG LONG F ST H-SP 810 31.890 650 25.591 210 8.268 75 2.953 2,200 86.614 1,700 66.929 530 20.866 190 7.480 810 31.890 650 25.591 210 8.268 75 2.953 2,200 86.614 1,700 66.929 530 20.866 190 7.480 Beam axis FX-101 Beam position/ Optical mbient (Upper value) axis dia. Inclination transmission Protection temp. FX-102 (mm) of beam loss (Lower value) axis 135 5.315 ø0.5 400 15.748 320 12.598 870 34.252 ø1 150 m / 2° 10 IP67 55 to 80 °C 5HWURUHIOHFWLYH Type Chemicalresistant Heatresistant M3 Model No. M4 7RXJK FD-40 Bending durability 14 M6 Threaded ø3 Sensing range (mm in) (Note) Beam axis Optical FX-101 position/ mbient U-LG transmission Protection (Upper value) Inclination of temp. LONG FX-500 series loss FX-102 beam axis F ST (Lower value) H-SP 2m 7RXJK M6 STD 160 6.299 HYPR 600 23.622 R2 FD-60 R4 17 Cylindrical Fiber Bending cable radius length : (mm) Free-cut FD-30 12 M4 ø3 Narrow Beam &RQYHUJHQW 5HIOHFWLYH Type ø1 7RXJK M3 Small Spot Wide Beam 5HÀHFWLYHW\SH Shape of ber head (mm) Cylindrical Type 6OHHYH Note: The ber cable length practically limits the sensing range. Type Threaded Type Flat Type 135 5.315 400 15.748 ø0.5 320 12.598 870 34.252 Super Quality 7RXJK FD-S30 Bending durability 10 STD HYPR 520 20.472 1,550 61.024 STD 160 6.299 HYPR 600 23.622 330 12.992 250 9.843 80 3.150 25 0.984 Liquid Leak / Liquid Detection Fiber Options 45 1.772 155 6.102 900 35.433 740 29.134 140 5.512 260 10.236 420 16.535 90 3.543 330 12.992 250 9.843 80 3.150 25 0.984 Vacuumresistant 150 m / 3° 10 IP67 55 to 80 °C 45 1.772 155 6.102 Fiber Dimensions Thru-beam Type 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type Others Note: The sensing range is speci ed for white non-glossy paper. Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table 7RXJK : It is a ber which possesses both unbreakable (bending radius: R10 mm, reciprocating bending: 180°) and bendable (bending radius: R4 mm or less) features. 10 New product introduction Tough Fiber Threaded Type It is a standard ber which is mounted using nuts. It has reasonable pricing while drastically improving exing performance. With the lens installable type, long distance sensing and microscopic ob ect sensing is possible by installing a lens. protective tube and a sturdy stainless acket type that prevents disconnection are also prepared. Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models FT-R41W FT-42 FT-31/31W/43/42/42W FT-45X/R40 5HÀHFWLYHW\SH!)'5 More user-friendly, high quality ber Fibers Super Quality Threaded Type Cylindrical Type 6OHHYH Flat Type Stainless steel fittings are used for the fiber head of all models. SUS * Some models not included (FT-R41W, FT-R42W, FT-140) 0HWDOIUHH¿EHU FT-41, FD-G60, FD-G40 Application FD-32G Made of resin Metallic particulate production ratio: ERO Effect on magnetic elds: ERO Narrow Beam Wide Beam &RQYHUJHQW 5HIOHFWLYH Type Chemicalresistant Type Shape of ber head (mm) M3 M3 Lens mountable FT-31W R2 Bending durability R1 FT-43 R4 15 5HWURUHÀHFWLYH Type Lens mountable 5HÀHFWLYH Type M4 7RXJK FT-42 Bending durability 15 Lens mountable M4 FT-42W R1 FT-45X R4 15 Lens mountable, Stainless- acketed M4 M4 Threaded Others Square head Elbow 20 Lens mountable 7RXJK 15 FT-R40 M4 M4 R4 Bending durability FT-R41W W7 × H9 × D13.9 R1 With expansion lens M4 FT-R42W Long range W7 × H9 × D14.4 M14 Earlier models comparison table FT-31 M4 Thru-beam Type INDEX 7RXJK Fiber Bending cable radius length : (mm) Free-cut 12 Fiber Dimensions FX-100 series Model No. 12 M3 Fiber Options FX-500 series High precision polishing is accomplished by using the PCTC polishing technique. The specularity of the end face of the ber is 5 times greater. Light intensity is increased, enabling stable sensing. Thru-beam type (one pair set) Vacuumresistant Amplifiers ,PSURYHG specularity *For details, please see our website. Sensing the presence of workpiece Heatresistant Liquid Leak / Liquid Detection The beam axis deviation of each unit is kept within 3 and the beam axis centering accuracy is kept within 150 m. (Within 5 and 90 m for ultra small diameter bers) Makes beam axis ad ustment easier Improves mounting hole machining accuracy Improves sensing accuracy Clearly conforms to RoHS Can be used for secondary battery Improved mounting strength Small Spot 5HWURUHIOHFWLYH Type ,PSURYHGFHQWHULQJDFFXUDF\ With expansion lens M14 7RXJK FT-140 40 R4 Bending durability FX-101 Beam (Upper value) axis dia. FX-102 (mm) (Lower value) Beam axis position/ mbient Inclination Protection temp. of beam axis 130 5.118 340 13.386 150 m / 2° 55 to 80 °C 150 m / 3° 40 to 60 °C 150 m / 2° 55 to 80 °C Sensing range (mm in) (Note 1) FX-500 series STD 315 12.402 HYPR 1,350 53.150 STD 260 10.236 HYPR 990 38.976 STD 1,400 55.118 2 m HYPR (Note 2) 3,600 141.732 STD 1,130 44.488 HYPR (Note 2) 3,600 141.732 STD 800 31.496 HYPR 3,300 129.921 STD 1,200 47.244 1m HYPR (Note 2) 1,600 62.992 STD 930 36.614 HYPR (Note 2) 3,600 141.732 STD 800 31.496 2 m HYPR 3,200 125.984 STD 2,200 86.614 HYPR (Note 2) 3,600 141.732 STD (Note 2) 19,600 771.654 10 m HYPR (Note 2) 19,600 771.654 U-LG LONG F ST H-SP 770 30.315 550 21.654 210 8.268 70 2.756 590 23.228 440 17.323 150 5.906 53 2.087 2,800 110.236 2,100 82.677 770 30.315 240 9.449 2,050 80.709 1,600 62.992 530 20.866 190 7.480 1,900 74.803 1,400 55.118 490 19.291 160 6.299 1,600 62.992(Note 2) 1,600 62.992(Note 2) 630 24.803 200 7.874 1,750 68.898 1,500 59.055 500 19.685 160 6.299 1,800 70.866 1,400 55.118 460 18.110 150 5.906 3,600 141.732(Note 2) 3,500 137.795 1,300 51.181 460 18.110 19,600 771.654(Note 2) 19,600 771.654(Note 2) 16,000 629.921 6,300 248.031 ø0.5 80 3.150 240 9.449 350 13.780 970 38.189 ø1.5 300 11.811 800 31.496 IP67 260 10.236 720 28.346 340 13.386 920 36.220 150 m / 3° 40 to 60 °C 150 m / 2° 55 to 80 °C ø1 270 10.630 740 29.134 250 9.843 710 27.953 510 20.079 2,000 78.740 ø2.2 14,000 551.181 19,600 771.654 ø10 (Note 2) IP40 40 to 60 °C IP67 40 to 70 °C Notes: 1) Note that the sensing range of the free-cut type ber may be reduced by 20 max. depending upon how the ber is cut. 2) The ber cable length practically limits the sensing range. 7RXJK : It is a ber which possesses both unbreakable (bending radius: R10 mm, reciprocating bending: 180°) and bendable (bending radius: R4 mm or less) features. 11 &RD[LDOW\SH)'Ƒ*ƑLQZKLFKKLJKSUHFLVLRQ SRVLWLRQLQJFDQEHDFKLHYHG Fiber options P.32 Fiber Selection Guide Choose by model 3URWHFWLYHWXEH P.33 Choose by shape/ application ·FTP-Ƒ ·FDP-Ƒ Viewing new models 5HÀHFWLYHW\SH Type Shape of ber head (mm) Fibers Model No. 7RXJK M3 FD-31 12 M3 FD-31W 12 Coaxial, Lens mountable M3 7RXJK FD-32G M3 17 Coaxial, Lens mountable, Stainless- acketed M3 FD-32GX Ultra-small diameter 18 Coaxial, Lens mountable M3 FD-EG30 16 Coaxial, Lens mountable M3 FD-EG31 16 7RXJK M4 FD-41 14 FD-41W M4 Threaded M4 14 Coaxial, Lens mountable M4 7RXJK FD-42G 25 Coaxial, Lens mountable M4 FD-42GW 25 M6 FD-62 17 7RXJK M6 FD-61 17 M6 M6 FD-61W 17 Coaxial M6 7RXJK FD-61G 17 Stainless- acketed M6 FD-64X Elbow 22 15 7RXJK FD-R60 M6 Tough Fiber Ÿ P.30~ Ÿ Supports spot lenses and zoom OHQVHV Lens Lens )RUWKUXEHDPW\SH¿EHU )RUUHÀHFWLYHW\SH¿EHU Ÿ It is a coaxial ber that encloses the circumference of the emitter ber at the center with the receiver ber. This is suitable for high-precision positioning. It can perform sensing without affecting the approach direction of the work. New product introduction Fiber Bending cable radius length : (mm) Free-cut Sensing range (mm in) (Note 1, 2) FX-101 U-LG (Upper value) LONG FX-500 series FX-102 F ST (Lower value) H-SP 290 11.417 STD 125 4.921 220 8.661 35 1.378 Bending 80 3.150 140 5.512 HYPR 25 0.984 durability 515 20.276 STD 180 7.087 80 3.150 140 5.512 15 0.591 R1 45 1.772 60 2.362 2 m HYPR 12 0.472 330 12.992 STD 380 14.961 R2 200 7.874 270 10.630 70 2.756 Bending 95 3.740 190 7.480 HYPR 27 1.063 durability 650 25.591 STD 410 16.142 200 7.874 360 14.173 75 2.953 1m R2 100 3.937 210 8.268 HYPR (Note 3) 30 1.181 630 24.803 STD 130 5.118 48 1.890 110 4.331 20 0.787 30 1.181 70 2.756 HYPR 9 0.354 170 6.693 500 mm R4 STD 45 1.772 20 0.787 35 1.378 7 0.276 12 0.472 25 0.984 HYPR 3.5 0.138 85 3.346 290 11.417 STD R2 125 4.921 220 8.661 35 1.378 Bending 80 3.150 140 5.512 HYPR 25 0.984 durability 515 20.276 STD 630 24.803 270 10.630 430 16.929 80 3.150 R1 150 5.906 230 9.055 HYPR 45 1.772 900 35.433 STD 380 14.961 R2 200 7.874 270 10.630 70 2.756 Bending 95 3.740 190 7.480 HYPR 27 1.063 durability 650 25.591 STD 340 13.386 150 5.906 280 11.024 45 1.772 R1 90 3.543 140 5.512 HYPR 25 0.984 670 26.378 2 m STD 1,000 39.370 520 20.472 940 37.008 170 6.693 340 13.386 450 17.717 HYPR R4 110 4.331 1,500 59.055 Bending STD 840 33.071 durability 450 17.717 670 26.378 120 4.724 200 7.874 410 16.142 HYPR 70 2.756 1,400 55.118 STD 630 24.803 270 10.630 430 16.929 80 3.150 R1 150 5.906 230 9.055 HYPR 45 1.772 900 35.433 STD 800 31.496 R4 420 16.535 650 25.591 120 4.724 Bending 200 7.874 350 13.780 HYPR 60 2.362 durability 1,100 43.307 STD 500 19.685 280 11.024 410 16.142 75 2.953 1m R4 160 6.299 220 8.661 HYPR 50 1.969 670 26.378 STD 600 23.622 R4 290 11.417 550 21.654 110 4.331 Bending 190 7.480 240 9.449 2 m HYPR 65 2.559 durability 1,100 43.307 R2 Beam axis position/ mbient Protection Inclination of temp. beam axis 150 m / 3° 55 to 80 °C IP67 40 to 60 °C Super Quality Threaded Type Cylindrical Type 6OHHYH Flat Type Small Spot Narrow Beam 55 to 80 °C &RQYHUJHQW 5HIOHFWLYH Type 5HWURUHIOHFWLYH Type IP40 40 to 70 °C 20 to 60 °C 150 m / 3° Wide Beam Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection 55 to 80 °C IP67 40 to 60 °C Fiber Options 55 to 80 °C Fiber Dimensions 40 to 60 °C 5HWURUHÀHFWLYH Type IP40 Thru-beam Type 5HÀHFWLYH Type Others 150 m / 3° 55 to 80 °C IP67 Amplifiers 40 to 60 °C IP40 FX-500 series FX-100 series INDEX 55 to 80 °C 150 m / 3° IP67 Notes: 1) Note that the sensing range of the free-cut type ber may be reduced by 20 max. depending upon how the ber is cut. 2) The sensing range is speci ed for white non-glossy paper. 3) The allowable cutting range is 700 mm 27.559 in from the end that the ampli er inserted. 7RXJK : It is a ber which possesses both unbreakable (bending radius: R10 mm, reciprocating bending: 180°) and bendable (bending radius: R4 mm or less) features. Earlier models comparison table 12 New product introduction Tough Fiber Cylindrical Type Has a slender shape which can be mounted in narrow locations using set screws. Line up that includes ultra-thin bers with ø0.25 mm tips. Fiber Selection Guide Choose by model FD-S31 FT-S32 Choose by shape/ application Viewing new models Fibers FT-S21/S21W/S31W 5HÀHFWLYHW\SH!)'66 User-friendly, high quality ber Improved centering accuracy and specularity Super Quality Threaded Type Cylindrical Type 6OHHYH Flat Type Stainless steel fittings are used for the fiber head of all models. Clearly conforms to RoHS Can be used for secondary battery Improved mounting strength Small Spot Narrow Beam Wide Beam &RQYHUJHQW 5HIOHFWLYH Type Thru-beam type (one pair set) 5HWURUHIOHFWLYH Type Chemicalresistant Type Shape of ber head (mm) Heatresistant ø1 ø1 Vacuumresistant Model No. 7RXJK ø1.5 R2 7RXJK FT-S21 Bending durability 10 ø1 5 Fiber Options 500 mm FT-S11 6 Liquid Leak / Liquid Detection Fiber Bending cable radius length : (mm) Free-cut ø1.5 FT-S21W R1 10 Others Amplifiers FX-500 series FX-100 series ø2 5 R10 FT-S32 8 FT-S31W 2m Bending durability R1 10 Narrow beam ø0.125mm ø0.25 ø3 ø3 5HÀHFWLYH Type ø3 7RXJK FT-E13 Sleeve part cannot be bent. R2 5 15 Narrow beam ø0.25mm ø0.4 ø3 7RXJK FT-E23 Sleeve part cannot be bent. Bending durability 1m 5 15 ø4 ø4 5HWURUHÀHFWLYH Type Cylindrical Thru-beam Type ø2.5 Side-view Ultra-small diameter Fiber Dimensions ø3 With lens, Long sensing range 7RXJK FT-V40 3 25 R4 Bending durability 2m Sensing range (mm in) (Note 1) FX-500 series STD 90 3.543 HYPR 350 13.780 STD 315 12.402 HYPR 1,350 53.150 STD 260 10.236 HYPR 990 38.976 STD 3,100 122.047 HYPR (Note 2) 3,600 141.732 STD 800 31.496 HYPR 3,300 129.921 STD 15 0.591 HYPR 52 2.047 STD 75 2.953 HYPR 270 10.630 STD 3,500 137.795 HYPR (Note 2) 3,600 141.732 Notes: 1) Note that the sensing range of the free-cut type ber may be reduced by 20 2) The ber cable length practically limits the sensing range. U-LG LONG F ST H-SP 210 8.268 160 6.299 60 2.362 19 0.748 770 30.315 550 21.654 210 8.268 70 2.756 590 23.228 440 17.323 150 5.906 53 2.087 3,600 141.732(Note 2) 3,600 141.732(Note 2) 1,800 70.866 600 23.622 1,900 74.803 1,400 55.118 490 19.291 160 6.299 30 1.181 24 0.945 8 0.315 2 0.079 160 6.299 125 4.921 42 1.654 13 0.512 3,600 141.732(Note 2) 3,600 141.732(Note 2) 2,400 94.488 850 33.465 FX-101 Beam (Upper value) axis dia. FX-102 (mm) (Lower value) Beam axis position/ mbient Inclination Protection temp. of beam axis 40 1.575 ø0.25 90 3.543 150 m IP67 / 2° 130 5.118 340 13.386 55 to 80 °C ø0.5 150 m / 3° 80 3.150 240 9.449 1,100 43.307 3,000 118.110 ø2 260 10.236 720 28.346 ø1 6 0.236 ø0.125 19 0.748 40 to 60 °C IP40 150 m / 3° 40 to 60 °C IP67 40 to 70 °C 22 0.866 ø0.25 80 3.150 1,000 39.370 3,100 122.047 ø2.5 40 to 70 °C IP50 40 to 60 °C max. depending upon how the ber is cut. INDEX Earlier models comparison table 7RXJK : It is a ber which possesses both unbreakable (bending radius: R10 mm, reciprocating bending: 180°) and bendable (bending radius: R4 mm or less) features. 13 New product introduction Tough Fiber Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Fibers Super Quality Threaded Type Cylindrical Type 6OHHYH Flat Type Small Spot Narrow Beam Wide Beam &RQYHUJHQW 5HIOHFWLYH Type 5HÀHFWLYHW\SH ø1 5 Type Shape of ber head (mm) Model No. 7RXJK ø1.5 FD-S21 10 7RXJK ø3 FD-S32 15 ø3 Cylindrical ø3 FD-S32W Fiber Bending cable radius length : (mm) Free-cut 7RXJK FD-S31 10 790 31.102 660 25.984 120 4.724 220 8.661 345 13.583 75 2.953 STD 270 10.630 HYPR 900 35.433 630 24.803 430 16.929 150 5.906 45 1.772 80 3.150 230 9.055 STD 125 4.921 HYPR 515 20.276 290 11.417 220 8.661 80 3.150 25 0.984 35 1.378 140 5.512 R1 STD 150 5.906 HYPR 670 26.378 340 13.386 280 11.024 90 3.543 25 0.984 45 1.772 140 5.512 29 1.142 25 0.984 7 0.276 2 0.079 5 0.197 15 0.591 R4 STD 12 0.472 HYPR 50 1.969 STD 55 2.165 HYPR 170 6.693 120 4.724 80 3.150 30 1.181 9 0.354 20 0.787 70 2.756 R2 Bending durability 1m R4 Bending durability R1 R2 2m Bending durability Coaxial ø3 FD-S33GW ø1 5 ø1.5 ø0.48 FD-E13 Sleeve part cannot be bent. ø3 ø0.63 ø3 Ultra-small diameter 15 15 3 15 5 Sleeve part cannot be bent. FD-E23 130 5.118 110 4.331 37 1.457 11 0.433 STD 80 3.150 HYPR 190 7.480 STD 420 16.535 HYPR 1,200 47.244 15 ø3 Sensing range (mm in) (Note 1, 2) FX-101 U-LG (Upper value) LONG FX-500 series FX-102 F ST (Lower value) H-SP 1m Notes: 1) Note that the sensing range of the free-cut type ber may be reduced by 20 2) The sensing range is speci ed for white non-glossy paper. Beam axis position/ mbient Protection Inclination of temp. beam axis 25 0.984 70 2.756 55 to 80 °C IP67 150 m / 3° Chemicalresistant Heatresistant Vacuumresistant IP40 150 m / 3° 5HWURUHIOHFWLYH Type 40 to 60 °C 55 to 80 °C Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions Thru-beam Type 5HWURUHÀHFWLYH Type 40 to 60 °C 5HÀHFWLYH Type Others IP40 40 to 70 °C max. depending upon how the ber is cut. Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table 7RXJK : It is a ber which possesses both unbreakable (bending radius: R10 mm, reciprocating bending: 180°) and bendable (bending radius: R4 mm or less) features. 14 New product introduction Tough Fiber 6OHHYH It is suitable for sensing in narrow locations and sensing minute ob ects because the ber tip is a thin sleeve. The 40 mm sleeve type can be bent in any direction. Fiber Selection Guide Choose by model FD-41S Choose by shape/ application Viewing new models FT-42S 7KUXEHDPW\SH!)7()7(8OWUDVPDOOGLDPHWHU¿EHU Centering of 1/10 mm or less Ultra-small diameter bers with a compact head ensure precision centering accuracy* to stably detect minute parts. Fibers Super Quality A B *Tolerance of A + Tolerance of B + Tolerance of C Threaded Type C Cylindrical Type 6OHHYH Dimensions UNCLEAR Flat Type Small Spot Narrow Beam 0.09 mm Dimensions unclear Screw Dimensions CLEAR Ex.) FT-E13 Dimensions unclear ø3 mm+0.05 +0.002 ø0.118 in 0 Previous general fiber New standard fiber Extra clearance needs to be added when designing and machining the mounting hole due to unclear dimensions. As a result, mounting variation increases and the beam axis deviates, resulting in a decrease in sensing accuracy or causing the sleeve to bend or break. Highly accurate design and machining are possible due to clear mounting hole dimensions. As a result, mounting variation is minimal, improving sensing accuracy. In addition to this, as the beam axis alignment is not affected when the fiber is changed, readjustment is not necessary. ø0.5 mm+0.05 +0.002 ø0.020 in 0 Screw Dimensions clear Wide Beam &RQYHUJHQW 5HIOHFWLYH Type 5HWURUHIOHFWLYH Type Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection 0LQXWHVHQVLQJRQO\SRVVLEOHZLWKXOWUDVPDOO¿EHU Detection of ne-pitch connector pins Fiber Options Fiber Dimensions Thru-beam Type FT-E13 Detection of tiny chips Ultra-small diameter ber with ø0.125 mm ø0.005 in beam axis is able to detect the insertion or bending of ne-pitch connector pins. Fiber can be installed with only the ø0.25 mm ø0.010 in sleeve close to the minute section. FT-E13 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type Others Amplifiers Stainless steel fittings are used for the fiber head of all models. Application Clearly conforms to RoHS Can be used for secondary battery Improved mounting strength FX-500 series FX-100 series INDEX Fiber options Fiber bender Earlier models comparison table ·FB-1 The ber bender bends the sleeve part of the ber head at the proper radius. Note: Do not bend the sleeve part of any side-view type ber or ultrasmall diameter head type ber. 15 New product introduction Thru-beam type (one pair set) Type Shape of ber head (mm) M3 ø0.88 FT-31S 10 M4 Narrow beam ø0.125mm ø0.25 ø3 7RXJK M4 FT-42S ø1.48 12 5 15 Narrow beam ø0.25mm 7RXJK ø0.4 ø3 FT-E23 Sleeve part cannot be bent. 7RXJK ø2 ø2 FT-V23 20 15 ø1 ø2 7RXJK 1 Sleeve part cannot be bent. FT-V25 15 15 ø1 ø2 ø2 5 R2 Bending durability 1m FT-V24W 15 15 ø1.5 ø2.5 7RXJK 1.3 FT-V30 Sleeve part cannot be bent. R4 Bending durability R2 Bending durability 2m 1 Sleeve part cannot be bent. 2m R4 Bending durability (Note 3) 5 15 1.1 Sleeve part cannot be bent. R2 Bending durability (Note 3) 7RXJK ø3 FT-E13 Sleeve part cannot be bent. ø1 Cylindrical Side-view 7RXJK M3 Sleeve 40mm Ultra-small diameter Threaded Sleeve 40mm Model No. Fiber Bending cable radius length : (mm) Free-cut 20 15 R1 R4 Bending durability Sensing range (mm in) (Note 1, 2) FX-101 U-LG (Upper value) LONG FX-500 series FX-102 FAST (Lower value) H-SP STD 315 12.402 HYPR 1,220 48.031 STD 1,130 44.488 HYPR (Note 2) 3,600 141.732 STD 15 0.591 HYPR 52 2.047 STD 75 2.953 HYPR 270 10.630 STD 450 17.717 HYPR 1,800 70.866 STD 240 9.449 HYPR 900 35.433 STD 110 4.331 HYPR 380 14.961 STD 680 26.772 HYPR 2,200 86.614 Notes: 1) Note that the sensing range of the free-cut type ber may be reduced by 20 2) The ber cable length practically limits the sensing range. 3) Bending radius of sleeve part is R10 mm or more. 740 29.134 550 21.654 195 7.677 63 2.480 2,050 80.709 1,600 62.992 530 20.866 190 7.480 30 1.181 24 0.945 8 0.315 2 0.079 160 6.299 125 4.921 42 1.654 13 0.512 1,000 39.370 880 34.646 280 11.024 90 3.543 550 21.654 480 18.898 140 5.512 45 1.772 230 9.055 200 7.874 60 2.362 20 0.787 1,200 47.244 1,000 39.370 340 13.386 100 3.937 130 5.118 340 13.386 Tough Fiber Beam Ambient axis dia. Protection temp. (mm) Choose by model ø0.5 55 to +80 °C 300 11.811 800 31.496 IP67 6 0.236 19 0.748 ø0.125 22 0.866 80 3.150 ø0.25 160 6.299 400 15.748 ø0.75 40 to +70 °C M3 Ultra-small diameter ø0.8 15 FD-EG30S R4 7RXJK M4 M4 Threaded Bending radius (mm) FD-41S ø1.48 FD-41SW ø1.48 12 7RXJK Sleeve 40 mm M6 M6 ø1 5 FD-61S ø2.5 15 R1 (Note 3) 2m Cylindrical Type 95 3.740 260 10.236 35 1.378 90 3.543 40 to +60 °C 180 7.087 480 18.898 55 to +80 °C ø1.0 Bending durability (Note 3) Sleeve part cannot be bent. R4 1m ø0.63 15 FD-E23 5 Sleeve part cannot be bent. ø3 Small diameter 15 15 ø3 ø1.5 7RXJK FD-V30 2 Sleeve part cannot be bent. 15 ø3 15 ø1.5 FD-V30W 2 R2 Bending durability R1 Sleeve part cannot be bent. ø5 15 ø5 7RXJK 20 ø2 Sleeve part cannot be bent. Narrow Beam Wide Beam &RQYHUJHQW 5HIOHFWLYH Type 5HWURUHIOHFWLYH Type max. depending upon how the ber is cut. Chemicalresistant 2.3 FD-V50 R4 Bending durability STD 50 1.969 HYPR 170 6.693 STD 125 4.921 HYPR 515 20.276 STD 80 3.150 HYPR 330 12.992 420 16.535 HYPR FD-E13 15 3 ø3 6OHHYH Flat Type Small Spot IP30 Sensing range (mm in) (Note 1, 2) FX-101 U-LG (Upper value) Protection LONG FX-500 series FX-102 FAST (Lower value) H-SP STD R4 ø1.5 ø0.48 ø3 Ultra-small diameter R2 Bending durability (Note 3) Sleeve 40 mm M4 Side-view 1m Sleeve part cannot be bent. Sleeve 40 mm Cylindrical Model No. Fiber cable length : Free-cut Sleeve 15 mm 12 Super Quality Threaded Type 55 to +80 °C ø0.5 Fibers Heatresistant Shape of ber head (mm) M3 Choose by shape/ application Viewing new models ø1 5HÀHFWLYHW\SH Type Fiber Selection Guide 2m 1,200 47.244 Vacuumresistant Ambient temp. 110 4.331 80 3.150 30 1.181 9 0.354 20 0.787 70 2.756 290 11.417 220 8.661 80 3.150 25 0.984 35 1.378 140 5.512 55 to +80 °C 180 7.087 140 5.512 45 1.772 12 0.472 15 0.591 60 2.362 40 to +60 °C IP40 IP67 790 31.102 660 25.984 130 5.118 220 8.661 360 14.173 75 2.953 40 to +70 °C 55 to +80 °C 29 1.142 25 0.984 7 0.276 2 0.079 5 0.197 15 0.591 STD 55 2.165 HYPR 170 6.693 120 4.724 80 3.150 30 1.181 9 0.354 20 0.787 70 2.756 40 to +70 °C STD 65 2.559 HYPR 240 9.449 130 5.118 120 4.724 35 1.378 14 0.551 25 0.984 75 2.953 55 to +80 °C 40 1.575 30 1.181 10 0.394 2 0.079 6 0.236 20 0.787 220 8.661 210 8.268 75 2.953 25 0.984 40 1.575 100 3.937 STD 12 0.472 HYPR 50 1.969 STD 20 0.787 HYPR 80 3.150 STD 120 4.724 HYPR 370 14.567 Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions Thru-beam Type 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type Others 40 to +60 °C Amplifiers IP40 FX-500 series FX-100 series INDEX IP30 40 to +60 °C 55 to +80 °C Notes: 1) Note that the sensing range of the free-cut type ber may be reduced by 20 max. depending upon how the ber is cut. 2) The sensing range is speci ed for white non-glossy paper. 3) Bending radius of sleeve part is R10 mm R0.394 in or more. 7RXJK : It is a ber which possesses both unbreakable (bending radius: R10 mm, reciprocating bending: 180°) and bendable (bending radius: R4 mm or less) features. Earlier models comparison table 16 New product introduction Tough Fiber Flat Type Since it has a thin, rectangular shape, it can be installed in narrow locations. It is also a ber with good workability and can be mounted directly with screws. Fiber Selection Guide Choose by model FT-Z30H FT-Z30E FT-Z30 Choose by shape/ application Viewing new models Fibers 7KHEXLOWLQ¿EHUJXLGHDOORZVIRUPXOWLSOH installation angles. Mounting with M2 or M3 screw We offer FT-WZ4/Z20HBW, FD-WZ4/Z20HBW, 1 point mounting with M2 screw and FT-WZ7/Z40HBW, FD-WZ7/Z40HBW, 1 point mounting with M3 screw. FT/FD-WZ HBW is equipped with a ber guide feature. Front sensing and side sensing can be selected with one head. Super Quality Threaded Type Space-saving installation Cylindrical Type Top Sensing M2 screw Side Sensing FD-Z20HBW 6OHHYH 10 mm 0.394 in Flat Type 2 mm The metal sleeve ensures tightening strength 0.079 in Small Spot Boss Narrow Beam Wide Beam &RQYHUJHQW 5HIOHFWLYH Type 5HWURUHIOHFWLYH Type Thru-beam type (one pair set) Chemicalresistant Heatresistant Vacuumresistant Type Liquid Leak / Liquid Detection Shape of ber head (mm) Top sensing W3 × H8 × D12 Model No. 7RXJK FT-Z30H Side sensing W3 × H12 × D8 7RXJK FT-Z30E Thru-beam Type STD STD R2 Bending durability (Note 2) R1 W8.5 × H12 × D3 7RXJK Flat FT-Z30 STD R2 Bending durability (Note 2) STD FT-Z30W Amplifiers FX-500 series FX-100 series FT-WZ4 1m With boss Fiber bending type W2 × H10 × D10 Front sensing FT-Z20HBW R1 W14 × H7 × D3.5 FT-WZ7 2m Fiber bending type W3.5 × H14 × D11 FT-Z40HBW 3,600 141.732 1,500 59.055 HYPR Front sensing W10 × H7 × D2 3,600 141.732 2,100 82.677 HYPR Front sensing 3,600 141.732 3,400 133.858 HYPR W8.5 × H12 × D3 Earlier models comparison table STD (Note 2) Front sensing 3,600 141.732 3,500 137.795 HYPR 2m FT-Z30EW 5HÀHFWLYH Type INDEX 3,500 137.795 (Note 2) R1 Side sensing W3 × H12 × D8 5HWURUHÀHFWLYH Type FX-500 series HYPR FT-Z30HW Fiber Dimensions Sensing range (mm in) (Note 1) U-LG LONG FAST H-SP Beam FX-101 Ambient (Upper value) axis dia. Protection temp. (mm) FX-102 (Lower value) R2 Bending durability Top sensing W3 × H8 × D12 Fiber Options Others Fiber Bending cable radius length : (mm) Free-cut (Note 2) 3,600 141.732 STD 530 20.866 HYPR (Note 2) 1,600 62.992 STD 260 10.236 HYPR 1,100 43.307 STD 1,400 55.118 HYPR 3,500 137.795 STD 800 31.496 HYPR 3,300 129.921 Notes: 1) Note that the sensing range of the free-cut type ber may be reduced by 20 2) The ber cable length practically limits the sensing range. 3,600 141.732(Note 2) 3,600 141.732(Note 2) 1,400 55.118 2,600 102.362 3,200 125.984 810 31.890 3,600 141.732(Note 2) 3,600 141.732(Note 2) 1,200 47.244 2,400 94.488 3,200 125.984 740 29.134 3,600 141.732(Note 2) 3,600 141.732(Note 2) 1,400 55.118 2,000 78.740 2,600 102.362 630 24.803 3,600 141.732(Note 2) 3,600 141.732(Note 2) 710 27.953 1,200 47.244 2,300 90.551 410 16.142 3,300 129.921 3,200 125.984 540 21.260 1,000 39.370 1,800 70.866 280 11.024 1,100 43.307 900 35.433 230 9.055 330 12.992 670 26.378 100 3.937 670 26.378 570 22.441 100 3.937 180 7.087 320 12.598 55 2.165 3,300 129.921 2,300 90.551 330 12.992 890 35.039 1,000 39.370 290 11.417 1,900 74.803 1,400 55.118 260 10.236 490 19.291 720 28.346 160 6.299 2×3 IP40 40 to +60 °C ø2 ø1.5 ø0.5 IP67 ø1.5 ø1 IP67 max. depending upon how the ber is cut. 7RXJK : It is a ber which possesses both unbreakable (bending radius: R10 mm, reciprocating bending: 180°) and bendable (bending radius: R4 mm or less) features. 17 New product introduction Tough Fiber Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Fibers Super Quality Threaded Type Cylindrical Type 6OHHYH Flat Type Small Spot Narrow Beam Wide Beam &RQYHUJHQW 5HIOHFWLYH Type 5HWURUHIOHFWLYH Type 5HÀHFWLYHW\SH Type Shape of ber head (mm) Model No. Bending radius (mm) Fiber cable length : Free-cut Front sensing FD-WZ4 W10 × H7 × D2 1m With boss Flat Fiber bending type FD-Z20HBW W2 × H10 × D10 R1 Front sensing FD-WZ7 W14 × H7 × D3.5 2m Fiber bending type FD-Z40HBW W3.5 × H14 × D11 Chemicalresistant Sensing range (mm in) (Note 1, 2) FX-101 FX-500 series Ambient U-LG (Upper value) Protection temp. LONG FX-102 FAST (Lower value) H-SP 1 to 110 0.039 to 4.331 2 to 20 1 to 85 0.039 to 3.346 0.079 to 0.787 3 to 35 0.118 to 1.378 1 to 70 5 to 13 0.197 to 0.512 0.039 to 2.756 STD 2 to 65 0.079 to 2.559 HYPR 1 to 230 0.039 to 9.055 1 to 210 0.039 to 8.268 STD 2 to 30 2 to 85 0.079 to 3.346 1 to 180 0.039 to 7.087 0.079 to 1.181 2 to 55 0.079 to 2.165 1 to 90 HYPR 1 to 340 0.039 to 13.386 3 to 15 0.118 to 0.591 0.039 to 3.543 230 9.055 STD 1 to 55 110 4.331 180 7.087 0.039 to 2.165 1.5 to 65 0.059 to 2.559 160 HYPR 3 to 25 0.118 to 0.984 6.299 430 16.929 IP67 540 21.260 STD 1 to 90 260 10.236 470 18.504 0.039 to 3.543 1 to 160 0.039 to 6.299 0.5 to 240 HYPR 2 to 50 0.079 to 1.969 0.020 to 9.449 760 29.921 IP67 Notes: 1) Note that the sensing range of the free-cut type ber may be reduced by 20 2) The sensing range is speci ed for white non-glossy paper. max. depending upon how the ber is cut. Heatresistant Vacuumresistant Liquid Leak / Liquid Detection Fiber Options 40 to +60 °C Fiber Dimensions Thru-beam Type 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table 18 New product introduction Tough Fiber Fiber Selection Guide Choose by model Small Spot Sensing of minute objects can be performed by combining the ber and spot lens. The spot diameter can also be changed. Choose by shape/ application Viewing new models Applications Packing detection Number of IC pins checking FD-42G/42GW Fibers FD-EG31 Super Quality FX-MR6 (lens) + FD-EG31 (fiber) IC FX-MR5 Threaded Type Discrimination of 0603 chip direction FX-MR3 Cylindrical Type 6OHHYH Flat Type Small Spot Because it s a side-view type, it can be mounted even in narrow spaces. 6PDOOVSRW¿EHUOLQHXS+LJKSUHFLVLRQ¿EHU 6SRWOHQV Narrow Beam Wide Beam Designation Shape of head (mm) Spot diameter (mm in) (Note) &RQYHUJHQW 5HIOHFWLYH Type Lens Distance to focal point Ambient (mm in) (Note) Model No. temp. Model No. 16 5HWURUHIOHFWLYH Type ø0.1 ø0.004 20 to +60 °C FD-EG31 ø4 Chemicalresistant 500 mm ø0.2 ø0.008 Heatresistant Vacuumresistant FX-MR6 20 to +60 °C 40 to +70 °C 7RXJK R2 FD-42G FD-42GW ø0.4 ø0.016 2m 40 to +60 °C R1 R2 FD-32G FD-32GX 55 to +80 °C Bending durability 7RXJK Fiber Options Finest spot lens R4 FD-EG30 7 0.5 0.276 0.020 Liquid Leak / Liquid Detection Fiber Dimensions Applicable bers Fiber cable Bending Ambient length radius Protection temp. : Free-cut (mm) 55 to +80 °C Bending durability 1m R2 15 ø0.15 ø0.006 Thru-beam Type 20 to +60 °C FD-EG31 ø4 500 mm 5HWURUHÀHFWLYH Type ø0.3 ø0.012 5HÀHFWLYH Type FD-EG30 7.5 0.5 0.295 0.020 Others FX-MR3 40 to +70 °C IP40 7RXJK R2 FD-42G FD-42GW ø0.5 ø0.020 Amplifiers Bending durability 2m 7RXJK FX-100 series FD-32GX 20.2 ø0.5 ø0.020 ø4 6 1 0.236 0.039 FX-MR1 40 to +70 °C 27.1 Approx.18.5 to 43 ø0.7 to ø2.0 ø0.028 to ø0.079 Approx. 0.728 to 1.693 oom lens ø7.1 FX-MR2 40 to +70 °C ø0.5 to ø3.0 Approx.13 to 30 ø0.020 to ø0.118 Approx. 0.512 to 1.181 FX-MR5 40 to +70 °C R1 7RXJK R2 FD-42G FD-42G FD-42GW 55 to +80 °C 40 to +60 °C 2m 55 to +80 °C R2 R2 FD-42G 7RXJK W6.3 × H20.3 × D10.3 1m 7RXJK FD-42GW Earlier models comparison table oom lens (Side-view type) Bending durability FD-42GW INDEX R1 40 to +70 °C R2 FD-32G FX-500 series Pinpoint spot lens R4 R1 R2 R1 55 to +80 °C 40 to +60 °C 55 to +80 °C 40 to +60 °C 55 to +80 °C 40 to +60 °C Note: Spot diameter and distance to focal point are speci ed for FX-500/FX-100 series. 7RXJK : It is a ber which possesses both unbreakable (bending radius: R10 mm, reciprocating bending: 180°) and bendable (bending radius: R4 mm or less) features. 19 New product introduction Narrow Beam Tough Fiber Since the beam is narrow, it has a feature by which it is not easily affected by surrounding obstacles even in long distances. Fiber Selection Guide Aperture angle 3° Choose by model Choose by shape/ application Applications Viewing new models FR-KZ50H Fibers FR-KZ22E Super Quality FT-KV40 Thru-beam type (one pair set) Type Shape of ber head (mm) ø3.5 ø3.7 Model No. STD 7RXJK FT-KS40 R2 Narrow beam 20 ø4 7RXJK FT-KV40 3 Bending durability 25 2m ø4 FT-KV40W 3 R1 25 1.5 × 2 7RXJK FT-KV26 2 20 Sensing range (mm in) (Note 1) FX-101 Beam U-LG (Upper value) axis dia. LONG FX-500 series FX-102 (mm) FAST (Lower value) H-SP Fiber Bending cable radius length : (mm) Free-cut R2 Bending durability 3,600 141.732(Note 2) 3,600 141.732 3,600 141.732(Note 2) 2,200 86.614 3,600 141.732(Note 2) 3,600 141.732 HYPR (Note 2) (Note 2) 3,600 141.732 1,200 47.244 STD 3,600 141.732(Note 2) (Note 2) 3,600 141.732 3,600 141.732(Note 2) 3,600 141.732(Note 2) HYPR (Note 2) 3,600 141.732 1,200 47.244 2,200 86.614 3,600 141.732 STD 3,600 141.732(Note 2) (Note 2) (Note 2) 3,600 141.732 3,600 141.732(Note 2) 3,100 122.047 HYPR (Note 2) 3,600 141.732 940 37.008 STD 1,600 62.992 710 27.953 1,200 47.244 135 5.315 440 17.323 560 22.047 HYPR 160 6.299 2,500 98.425 (Note 2) Beam axis position/ Ambient Inclination Protection temp. of beam axis ø2.2 IP40 lters Side sensing Top sensing With Wafer mapping polarizing Narrow beam Model No. ø2.5 40 to +60 °C 0.8° IP30 Bending Fiber cable length radius : Free-cut (mm) R1 W30 × H30 × D0.5 7RXJK ø1 X 1° 0.5° Chemicalresistant Heatresistant Liquid Leak / Liquid Detection U-LG LONG FAST H-SP STD 100 to 1,400 3.937 to 55.118 100 to 990 3.937 to 38.976 100 to 1,200 3.937 to 47.244 100 to 780 3.937 to 30.709 HYPR 100 to 1,900 3.937 to 74.803 100 to 490 3.937 to 19.291 FX-500 series FX-101 Ambient (Upper value) Protection temp. FX-102 (Lower value) 100 to 550 3.937 to 21.654 100 to 830 IP40 3.937 to 32.677 7RXJK Fiber Dimensions 15 to 460 0.591 to 18.110 15 to 200 15 to 310 0.591 to 12.205 15 to 410 0.591 to 16.142 0.591 to 7.874 15 to 220 0.591 to 8.661 15 to 360 HYPR 15 to 570 0.591 to 22.441 15 to 100 0.591 to 3.937 0.591 to 14.173 FR-KZ50H W10.6 × H28 × D10.1 W9.5 × H25 × D5.2 R2 Thru-beam Type 5HWURUHÀHFWLYH Type 2m IP30 Bending durability 40 to +60 °C STD 20 to 800 0.787 to 31.496 20 to 200 20 to 300 0.787 to 11.811 20 to 400 0.787 to 15.748 0.787 to 7.874 20 to 200 0.787 to 7.874 20 to 350 HYPR 20 to 1,000 0.787 to 39.370 20 to 200 0.787 to 7.874 0.787 to 13.780 7RXJK FR-KZ50E Long range Others FX-500 series FX-100 series Sensing range (mm in) (Note 1) Shape of ber head (mm) 5HÀHFWLYH Type Amplifiers W28 × H10.6 × D10.1 5HÀHFWLYHW\SH Type Fiber Options 25 to +55 °C STD FR-KZ22E W4 × H2 × D21.5 &RQYHUJHQW 5HIOHFWLYH Type 5HWURUHIOHFWLYH Type W7.5 × H2.2 × D11.2 W5.2 × H9.5 × D21 Wide Beam Vacuumresistant W5.2 × H9.5 × D16 FR-Z50HW 6OHHYH Flat Type Narrow Beam Sensing range (mm in) (Note 1, 3) Shape of ber head (mm) Cylindrical Type Small Spot 5HWURUHÀHFWLYHW\SH Type Threaded Type Model No. Bending Fiber cable length radius : Free-cut (mm) W5.2 × H9.5 × D16 FD-Z50HW R1 2m FX-101 Ambient U-LG (Upper value) Protection temp. LONG FX-102 FAST (Lower value) H-SP STD 10 to 1,100 0.394 to 43.307 10 to 200 10 to 650 0.394 to 25.591 10 to 1,000 0.394 to 39.370 0.394 to 7.874 40 to 10 to 410 0.394 to 16.142 10 to 530 IP40 +60 °C HYPR 15 to 130 0.591 to 5.118 0.394 to 20.866 10 to 2,500 0.394 to 98.425 FX-500 series Notes: 1) Note that the sensing range of the free-cut type ber may be reduced by 20 max. depending upon how the ber is cut. 2) The ber cable length practically limits the sensing range. 3) The sensing range is the possible setting range for the attached re ector. The ber can detect an object less than setting range for the re ector. Refer to P.22 for the sensing range when FR-Z50HW is used in combination with a re ector (optional). 7RXJK : It is a ber which possesses both unbreakable (bending radius: R10 mm, reciprocating bending: 180°) and bendable (bending radius: R4 mm or less) features. INDEX Earlier models comparison table 20 New product introduction Tough Fiber Fiber Selection Guide Choose by model Wide Beam Senses work with inde nite shape or position in the beam band without missing. It can also be used to determine shape. FT-A11 Choose by shape/ application Viewing new models Applications 6HQVLQJWLQ\PRYLQJREMHFWV Inspecting screw height Control the amount of meandering &RQ¿UPLQJSUHVHQFHRIVOLWPDVN FD-A16 Spot size 2 × 15mm (by a distance of 15mm) FT-A11 Fibers Super Quality FT-A32 Threaded Type Cylindrical Type Type : With slit mask 6OHHYH Flat Type Type : Without slit mask Small Spot Narrow Beam Wide Beam &RQYHUJHQW 5HIOHFWLYH Type 5HWURUHIOHFWLYH Type Thru-beam type (one pair set) Type Shape of ber head (mm) Chemicalresistant Heatresistant Sensing width 32mm Vacuumresistant W5 × H69 × D20 Fiber Options Others Sensing width 32mm STD R2 Bending durability (Note 2) HYPR (Note 2) 3,600 141.732 3,600 141.732 Beam Ambient axis dia. Protection temp. (mm) 3,600 141.732(Note 2) 3,600 141.732(Note 2) 3,600 141.732(Note 2) 2,100 82.677 3,600 141.732 40 to +60 °C 3,600 141.732 3.2 × 32 STD FT-A32W R1 W4.2 × H31 × D13.5 Allows exible wiring Sensing width 11mm (Note 2) 7RXJK FT-A11 FT-A11W R2 Bending durability R1 Array W4.2 × H31 × D13.5 Sensing width 5.5mm (Note 2) HYPR W5 × H69 × D20 Sensing width 11mm Thru-beam Type 5HÀHFWLYH Type FT-A32 FX-500 series FX-101 (Upper value) FX-102 (Lower value) (Note 2) Fiber Dimensions 5HWURUHÀHFWLYH Type 7RXJK U-LG LONG FAST H-SP Allows exible wiring Wide beam Liquid Leak / Liquid Detection Model No. Sensing range (mm in) (Note 1) Fiber Bending cable radius length : (mm) Free-cut 7RXJK FT-AL05 W5 × H15 × D15 R2 Bending durability 2m STD 3,600 141.732 3,600 141.732 3,600 141.732(Note 2) 3,600 141.732(Note 2) 3,600 141.732(Note 2) 3,000 118.110 3,600 141.732(Note 2) 3,600 141.732(Note 2) 3,600 141.732(Note 2) HYPR (Note 2) 3,600 141.732 1,100 43.307 STD 3,600 141.732(Note 2) (Note 2) 3,600 141.732 3,600 141.732(Note 2) 3,600 141.732(Note 2) HYPR (Note 2) 3,600 141.732 1,300 51.181 STD 1,550 61.024 860 33.858 1,500 59.055 500 19.685 HYPR 170 6.693 2,300 90.551 (Note 2) 3,600 141.732 (Note 2) 40 to +55 °C IP40 1,900 74.803 3,600 141.732 40 to +70 °C (Note 2) 2.2 × 11 40 to +55 °C 1,700 66.929 3,400 133.858 250 9.843 660 25.984 0.25 × 5.5 55 to +80 °C Notes: 1) Note that the sensing range of the free-cut type ber may be reduced by 20 max. depending upon how the ber is cut. 2) The ber cable length practically limits the sensing range to 3,600 mm 141.72 in long. 5HÀHFWLYHW\SH Amplifiers FX-500 series Type Shape of ber head (mm) Wide beam FX-100 series 7RXJK FD-A16 W7 × H15 × D30 Array INDEX Earlier models comparison table Model No. 7RXJK FD-AL11 W5 × H20 × D20 Bending Fiber cable length radius : Free-cut (mm) R4 Bending durability R2 Bending durability 2m Sensing range (mm in) (Note 1, 2) FX-101 Ambient U-LG (Upper value) Protection temp. LONG FX-500 series FX-102 FAST (Lower value) H-SP STD 200 7.874 HYPR Cannot use STD 320 12.598 HYPR 670 26.378 Notes: 1) Note that the sensing range of the free-cut type ber may be reduced by 20 2) The sensing range is speci ed for white non-glossy paper. 200 7.874 200 7.874 140 5.512 75 2.953 120 4.724 240 9.449 530 20.866 510 20.079 180 7.087 50 1.969 100 3.937 285 11.220 40 to +60 °C IP40 55 to +80 °C max. depending upon how the ber is cut. 7RXJK : It is a ber which possesses both unbreakable (bending radius: R10 mm, reciprocating bending: 180°) and bendable (bending radius: R4 mm or less) features. 21 &RQYHUJHQW5HÀHFWLYH7\SH New product introduction Tough Fiber It is a ber in which the sensing distance is limited to a speci c range so it is not easily affected by the background. It is effective when work has accumulated or when the background is near. Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Applications 6XEVWUDWHFRQYH\RUV Detecting glass substrate Mounting in handring arms Fibers Mapping fiber FD-L32H Seating FD-L12W Super Quality confirmation fiber FD-L11 Threaded Type FD-L30A Cylindrical Type 6OHHYH Flat Type Small Spot Alignment fiber FD-L22A/L30A/L31A Narrow Beam 5HÀHFWLYHW\SH Type Shape of ber head (mm) Model No. Mapping Fiber cable length : Free-cut W25 × H7.3 × D30 7RXJK Alignment FD-L30A W20 × H29 × D3.8 7RXJK Alignment FD-L31A W23.5 × H29 × D4.5 Bending durability 4m Bending durability HYPR 3m Seating confirmation 7RXJK FD-L23 2m 3m R4 7RXJK FD-L10 Bending durability W12 × H19 × D3 7RXJK FD-L21 W24 × H21 × D4 FD-L21W R2 Bending durability 2m R1 Ultlasmall General purpose W24 × H21 × D4 7RXJK W7.2 × H7.5 × D2 R2 FD-L20H Bending durability FD-L12W R1 W6 × H18 × D14 STD STD FD-L11 Seating confirmation 0 to 43 0 to 1.693 R2 Bending durability 7RXJK W12 × H19 × D3 0 to 43 0 to 1.693 STD 0 to 24 0 to 0.945 HYPR 0 to 31 0 to 1.220 W18 × H29 × D3.8 Seating confirmation 0 to 110 0 to 4.331 4 to 33 0.157 to 1.299 HYPR 3 to 35 0.118 to 1.378 FD-L22A W17 × H29 × D3.8 0 to 56 0 to 2.205 Bending durability 7RXJK Alignment HYPR STD R2 R4 FX-500 series STD R4 FD-L32H Glass substrate detection Bending radius (mm) 1m Wide Beam Sensing range (mm in) (Note 1, 2) 0 to 29 0 to 1.142 HYPR 0 to 30 0 to 1.181 U-LG LONG FAST H-SP FX-101 Ambient (Upper value) Protection temp. FX-102 (Lower value) 0 to 87 0 to 3.425 16 to 30 0 to 74 0 to 2.913 0.630 to 1.181 1 to 38 0.039 to 1.496 0 to 50 Cannot use 0 to 1.969 0 to 43 0 to 1.693 0 to 43 0 to 1.693 0 to 42 0 to 1.654 0 to 29 0 to 1.142 0 to 19 0 to 0.748 0 to 25 0 to 0.984 0 to 30 0 to 1.181 0 to 30 0 to 1.181 0 to 28 0 to 1.102 1.5 to 24 0.059 to 0.945 0 to 28 0 to 1.102 0 to 30 0 to 1.181 0 to 10.5 0 to 0.413 0 to 10 0 to 0.394 0 to 9 0 to 0.354 0 to 8 0 to 0.315 0 to 8 0 to 0.315 0 to 9 0 to 0.354 0 to 5.5 0 to 0.217 0 to 5.5 0 to 0.217 0 to 4.5 0 to 0.177 0 to 4 0 to 0.157 0 to 4.5 0 to 0.177 0 to 5.5 0 to 0.217 1 to 18 0.039 to 0.709 3 to 15 1 to 18 0.039 to 0.709 0.118 to 0.591 2 to 15 0.079 to 0.591 1.5 to 16 3 to 12 0.118 to 0.472 0.059 to 0.630 STD 3 to 14 0.118 to 0.551 HYPR 1.5 to 15 0.059 to 0.591 2 to 15 0.079 to 0.591 7 to 12 2 to 15 0.079 to 0.591 0.276 to 0.472 4 to 14 0.157 to 0.551 3 to 14 6.5 to 10 0.256 to 0.394 0.118 to 0.551 Chemicalresistant Heatresistant Liquid Leak / Liquid Detection 4 to 33 0.157 to 1.299 5 to 30 4 to 33 0.157 to 1.299 0.197 to 1.181 4 to 32 0.157 to 1.260 4 to 33 5 to 25 0.197 to 0.984 0.157 to 1.299 0 to 28 0 to 1.102 0 to 27 0 to 1.063 0 to 24 0 to 0.945 0 to 18 0 to 0.709 5HWURUHIOHFWLYH Type Vacuumresistant 0 to 40 0 to 1.575 0 to 50 0 to 1.969 STD 0 to 9.5 0 to 0.374 HYPR 0 to 11.5 0 to 0.453 STD 0 to 5 0 to 0.197 HYPR 0 to 6 0 to 0.236 STD 1.5 to 16 0.059 to 0.630 HYPR 1 to 19 0.039 to 0.748 STD 23 0.906 HYPR 45 1.772 STD 8 0.315 HYPR 14 0.551 40 to +60 °C &RQYHUJHQW 5HIOHFWLYH Type 0 to +70 °C Fiber Options Fiber Dimensions 20 to +70 °C Thru-beam Type 5HWURUHÀHFWLYH Type IP40 5HÀHFWLYH Type Others 40 to +60 °C Amplifiers FX-500 series FX-100 series 35 1.378 5 to 15 32 1.260 0.197 to 0.591 2 to 15 0.079 to 0.591 1 to 30 5 to 9 0.197 to 0.354 0.039 to 1.181 40 to +70 °C 12.5 0.492 1 to 4.5 12 0.472 0.039 to 0.177 IP30 0.5 to 7 0.020 to 0.276 0.5 to 7 0.5 to 4 0.020 to 0.157 0.020 to 0.276 40 to +60 °C Notes: 1) The sensing range is speci ed for transparent glass 100 × 100 × t0.7 mm 3.937 × 3.937 × t0.028 in (FD-L32H: R edge, FD-L21 and FD-L21W: t2 mm t0.079 in) (FD-L20H: white non-glossy paper, FD-L10: silicon wafers 100 × 100 mm 3.937 × 3.937 in). 2) Note that the sensing range of the free-cut type ber may be reduced by 20 max. depending upon how the ber is cut. 7RXJK : It is a ber which possesses both unbreakable (bending radius: R10 mm, reciprocating bending: 180°) and bendable (bending radius: R4 mm or less) features. INDEX Earlier models comparison table 22 New product introduction Tough Fiber 5HWURUHÀHFWLYH7\SH Compared with the thru-beam type, it is easier to rotate the bers since one side is a re ector. Sensing transparent objects is also its advantage. Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Applications 'HWHFWLQJWUDQVSDUHQW¿OP Detecting wafer Detection of transparent seals on transparent sheet FR-KZ50E Fibers FR-Z50HW Super Quality Threaded Type Cylindrical Type Re ector RF-003 (Accessory for FR-KZ50E) FR-KZ22E 6OHHYH Flat Type Small Spot Narrow Beam 5HWURUHÀHFWLYHW\SH Wide Beam &RQYHUJHQW 5HIOHFWLYH Type Sensing range (mm in) (Note 1, 2) Type Shape of ber head (mm) Model No. Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions Thru-beam Type 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type Others Amplifiers FX-500 series FX-100 series lters With Narrow beam Heatresistant Side sensing Top sensing Chemicalresistant Wafer mapping polarizing 5HWURUHIOHFWLYH Type Bending Fiber cable length radius : Free-cut (mm) W5.2 × H9.5 × D16 FR-Z50HW R1 W30 × H30 × D0.5 U-LG LONG FAST H-SP STD 100 to 1,400 3.937 to 55.118 100 to 990 3.937 to 38.976 100 to 1,200 3.937 to 47.244 100 to 780 3.937 to 30.709 HYPR 100 to 1,900 3.937 to 74.803 100 to 490 3.937 to 19.291 FX-500 series FX-101 Ambient (Upper value) Protection temp. FX-102 (Lower value) 100 to 550 3.937 to 21.654 100 to 830 IP40 3.937 to 32.677 25 to +55 °C W7.5 × H2.2 × D11.2 7RXJK STD 15 to 310 0.591 to 12.205 HYPR 15 to 570 0.591 to 22.441 FR-KZ22E W4 × H2 × D21.5 W5.2 × H9.5 × D21 R2 7RXJK FR-KZ50H W10.6 × H28 × D10.1 W9.5 × H25 × D5.2 15 to 460 0.591 to 18.110 15 to 200 15 to 410 0.591 to 16.142 0.591 to 7.874 15 to 220 0.591 to 8.661 15 to 360 15 to 100 0.591 to 3.937 0.591 to 14.173 2m Bending durability IP30 STD 20 to 300 0.787 to 11.811 HYPR 20 to 1,000 0.787 to 39.370 7RXJK FR-KZ50E 40 to +60 °C 20 to 800 0.787 to 31.496 20 to 200 20 to 400 0.787 to 15.748 0.787 to 7.874 20 to 200 0.787 to 7.874 20 to 350 20 to 200 0.787 to 7.874 0.787 to 13.780 W28 × H10.6 × D10.1 Notes: 1) Note that the sensing range of the free-cut type ber may be reduced by 20 max. depending upon how the ber is cut. 2) The sensing range is the possible setting range for the attached re ector. The ber can detect an object less than setting range for the re ector. 6HQVLQJUDQJHZKHQ)5=+:LVXVHGLQFRPELQDWLRQZLWKDUHÀHFWRURSWLRQDO Re ector model No. RF-230 RF-220 RF-210 HYPR U-LG 100 to 19,000 3.937 to 748.030 100 to 8,000 3.937 to 314.960 100 to 5,500 3.937 to 216.535 100 to 8,000 3.937 to 314.960 100 to 4,700 3.937 to 185.039 100 to 2,700 3.937 to 106.299 Sensing range (mm in) FX-500 series LONG STD FAST 100 to 5,000 3.937 to 196.850 100 to 3,500 3.937 to 137.795 100 to 2,400 3.937 to 94.488 100 to 3,600 3.937 to 141.732 100 to 3,000 3.937 to 118.110 100 to 1,500 3.937 to 59.055 100 to 2,900 3.937 to 114.173 100 to 1,800 3.937 to 70.866 100 to 1,200 3.937 to 47.244 H-SP 100 to 1,400 3.937 to 55.118 100 to 830 3.937 to 32.677 100 to 530 3.937 to 20.866 FX-101 100 to 2,400 3.937 to 94.488 100 to 1,300 3.937 to 51.181 100 to 980 3.937 to 38.583 FX-102 100 to 5,000 3.937 to 196.850 100 to 2,600 3.937 to 102.362 100 to 1,300 3.937 to 51.181 Note: The sensing range of retrore ective type is the possible setting range for the attached re ector. The ber can detect an object less than 100 mm. However, note that if there are any white or highly-re ective surfaces near the ber head, re ected incident light may affect the ber head. If this occurs, adjust the threshold value of the ampli er unit before use. INDEX Fiber option RHÀHFWRUIRU)5=+: P.33 Ÿ Earlier models comparison table 7RXJK : It is a ber which possesses both unbreakable (bending radius: R10 mm, reciprocating bending: 180°) and bendable (bending radius: R4 mm or less) features. 23 New product introduction Chemical-resistant Tough Fiber With the case and ber sheath made of PFA, the ber can be used with various types of chemical liquids. Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Applications 6HQVLQJZDIHULQFRUURVLYHHQYLURQPHQW Detecting wafer cassette in cleaning tank Fibers Cleaning tank Super Quality Threaded Type FT-L80Y Wafer cassette FT-Z802Y Cylindrical Type 6OHHYH Flat Type Small Spot Wafer Narrow Beam Wide Beam &KHPLFDO¿OOHU &RQYHUJHQW 5HIOHFWLYH Type 5HWURUHIOHFWLYH Type Chemicalresistant Heatresistant FT-Z802Y Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Thru-beam type (one pair set) Type Shape of ber head (mm) Model No. Fiber Bending cable radius length : (mm) Free-cut 



 

 W7 × H15 × D13 Sensing range (mm in) (Note 1) FX-500 series STD FT-Z802Y R25 2m 3,100 122.047 HYPR (Note 2) 3,600 141.732 (Note 2) 3,600 141.732 U-LG LONG FAST H-SP Beam FX-101 Ambient (Upper value) axis dia. Protection temp. (mm) FX-102 (Lower value) Fiber Dimensions Thru-beam Type 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type 3,600 141.732(Note 2) 3,600 141.732(Note 2) 520 20.472 1,900 74.803 3,100 122.047 470 18.504 IP67 0 to +60 °C Others Heat-resistant 115 °C Chemical-resistant STD ø5.5 FT-HL80Y HYPR (Note 2) (25) 3,600 141.732 3,600 141.732(Note 2) 3,600 141.732(Note 2) 2,300 90.551 740 29.134 Amplifiers 990 38.976 2,340 92.126 40 to +115 °C ø3.7 FX-500 series FX-100 series ø5.5 FT-L80Y (25) R30 STD (Note 2) 3,600 141.732 2m HYPR (Note 3) (Note 2) 3,600 141.732 3,600 141.732(Note 2) 3,600 141.732(Note 2) 1,100 43.307 2,800 110.236 2,600 102.362 920 36.220 IP67g 40 to +70 °C Side-view STD ø5.5 (25) FT-V80Y 1,300 51.181 HYPR (Note 2) 3,600 141.732 2,800 110.236 2,200 86.614 800 31.496 240 9.449 340 13.386 800 31.496 Notes: 1) Note that the sensing range of the free-cut type ber may be reduced by 20 max. depending upon how the ber is cut. 2) The ber cable length practically limits the sensing range. 3) The allowable cutting range is 500 mm 19.685 in from the end that the ampli er inserted. ø2.8 INDEX Earlier models comparison table 24 New product introduction Tough Fiber Fiber Selection Guide Choose by model Heat-resistant It can be used under environments of -60 to +350 °C -76 to +662 °F. A wide joint type for workability is also prepared. Choose by shape/ application Viewing new models Fibers Applications IC detection within a high temperature handler Detecting glass substrates FT-H20W-M1 Super Quality Threaded Type Cylindrical Type 6OHHYH Flat Type Small Spot Narrow Beam Wide Beam &RQYHUJHQW 5HIOHFWLYH Type 5HWURUHIOHFWLYH Type Chemicalresistant Thru-beam type (one pair set) HeatShape of ber head Type resistant (mm) temp. Lens mountable (FX-LE1/LE2/SV1) Heatresistant Vacuumresistant M4 350 °C Sleeve 60 mm M4 Heat-resistant ø2.1 27 200 °C M4 Thru-beam Type 130 °C M4 23 Lens mountable (FX-LE2 only) M4 Lens mountable (FX-LE1/LE2/SV1) Heat-resistant (joint) M4 23 R10 FT-H20-M1 R25 FT-H13-FM2 2m FT-H20-J20-S (Note 5) 200 mm (Note 3) FT-H20-J30-S (Note 5) 300 mm (Note 3) Side-view ø3.8 Earlier models comparison table FT-H20W-M1 FT-H20-J50-S (Note 5) 200 °C 24 INDEX 2m 1m Others FX-100 series Fiber R25 Sleeve 16 5HÀHFWLYH Type FX-500 series R25 23 Lens mountable (FX-LE1/LE2/SV1) 5HWURUHÀHFWLYH Type FT-H35-M2S6 Sensing range (mm in) (Note 1) FX-101 Beam Ambient U-LG (Upper value) axis dia. temp. LONG FX-500 series FX-102 (mm) FAST (Lower value) H-SP STD 430 16.929 HYPR 1,200 47.244 880 34.646 670 26.378 170 6.693 250 9.843 490 19.291 80 3.150 ø1.2 60 to +350 °C R10 Allows flexible wiring Lens mountable (FX-LE1/LE2/SV1) Fiber Dimensions Amplifiers FT-H35-M2 30 Liquid Leak / Liquid Detection Fiber Options Model No. Bending Fiber cable radius length (mm) : Free-cut FT-H20-VJ50-S (Note 5) Heatresistant side R18 (Note 4) 100 3.937 300 11.811 STD 1,300 51.181 540 21.260 960 37.795 210 8.268 330 12.992 540 21.260 HYPR (Note 2) 1,600 62.992 110 4.331 STD 1,900 74.803 700 27.559 1,300 51.181 250 9.843 410 16.142 700 27.559 HYPR 140 5.512 3,300 129.921 STD 800 mm (Note 3) ø0.8 60 to +200 °C ø1.2 ø1.5 60 to +130 °C ø1.2 60 to +200 °C STD 1,000 39.370 470 18.504 790 31.102 135 5.315 300 11.811 420 16.535 HYPR 90 3.543 1,600 62.992 500 mm (Note 3) ø4 FT-H20-VJ80-S (Note 5) STD 1,000 39.370 470 18.504 840 33.071 300 11.811 HYPR (Note 2) 1,600 62.992 90 3.543 600 23.622 HYPR 2,100 82.677 1,300 51.181 980 38.583 150 5.906 390 15.354 500 19.685 120 4.724 Notes: 1) Note that the sensing range of the free-cut type ber may be reduced by 20 max. depending upon how the ber is cut. 2) The ber cable length practically limits the sensing range. 3) Fiber length ( xed-length) for heat-resistant ber side. Fiber length for ordinary temperature side is 2 m 6.562 ft (free-cut). 4) R25 mm R0.984 in or more for ordinary temperature side. 5) Heat-resistant side ber + ordinary temperature ber (FT-FM2) are sold together as a set. 25 +HDWUHVLVWDQWMRLQW¿EHUVHWFRQWHQWV Heat-resistant side (–60 to +200 °C –76 to +392 °F) * Ordinary temperature (–40 to +70 °C –40 to +158 °F) New product introduction Tough Fiber Ordinary temperature side 100 mm 3.937 in approx. Amplifiers Fiber Selection Guide Choose by model Heat-resistant side fiber Choose by shape/ application Ordinary temperature side fiber (FT-FM2) Nut (resin) Nut (metal), Use when securing to a mounting bracket. Viewing new models 0RGHO1RZKHQRUGHULQJLQGLYLGXDOSDUWVIURPVSDUHSDUWV Heat-resistant side ber one pair set FT-H20-J20, FT-H20-J30, FT-H20-J50, FT-H20-VJ50, FT-H20-VJ80 Fibers Ordinary temperature side ber one pair set FT-FM2 Threaded Type Super Quality Cylindrical Type 5HÀHFWLYHW\SH Heat- Type resistant temp. Shape of ber head (mm) 6OHHYH Model No. Bending Fiber cable radius length : Free-cut (mm) Sensing range (mm in) (Note 1, 2) FX-101 Ambient U-LG (Upper value) temp. LONG FX-500 series FX-102 FAST (Lower value) H-SP Coaxial M6 FD-H35-M2 25 2m Sleeve 60 mm ø2.8 M6 350 °C FD-H35-M2S6 22 Sleeve 90 mm Threaded M4 ø2.1 R10 27 Coaxial M6 200 °C Heat-resistant FD-H35-20S Fiber R25 Sleeve 1m FD-H20-M1 28 Coaxial M4 FD-H20-21 27 130 °C Narrow Beam &RQYHUJHQW 5HIOHFWLYH Type 75 2.953 280 11.024 60 to +350 °C STD 260 10.236 HYPR 840 33.071 550 21.654 440 17.323 140 5.512 45 1.772 85 3.346 200 7.874 STD 330 12.992 HYPR 840 33.071 550 21.654 500 19.685 200 7.874 55 2.165 120 4.724 300 11.811 STD 230 9.055 HYPR 770 30.315 500 19.685 380 14.961 130 5.118 45 1.772 90 3.543 280 11.024 5HWURUHIOHFWLYH Type Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection 60 to +200 °C Fiber Options STD M6 FD-H13-FM2 2m 21 Glass substrate detection convergent re ective 540 21.260 460 18.110 150 5.906 45 1.772 Small Spot Wide Beam R25 STD 260 10.236 HYPR 720 28.346 Flat Type 300 °C FD-H30-L32 R25 2m W19 × H27 × D5 FD-H25-L43 W21 × H33.2 × D5 250 °C 3m FD-H25-L45 W21 × H34.5 × D5 180 °C FD-H18-L31 W19 × H27 × D5 2m 640 25.197 350 13.780 60 to 600 23.622 100 3.937 200 7.874 280 11.024 +130 °C HYPR 65 2.559 880 34.646 STD 30 1.181 2 to 9 17 0.669 60 to 25 0.984 0.079 to 0.354 12 0.472 0 to 17 +300 °C HYPR 1.5 to 6 0.059 to 0.236 0 to 0.669 40 1.575 STD 1 to 30 0.039 to 1.181 4 to 16 20 to 1.5 to 26 0.059 to 1.024 1 to 28 0.039 to 1.102 0.157 to 0.630 1.5 to 24 0.059 to 0.945 4 to 23 +250 °C HYPR 2 to 18 0.079 to 0.709 0.157 to 0.906 Ordinary 1 to 31 0.039 to 1.220 STD 4 to 43 0.157 to 1.693 7 to 35 temp. side: 5 to 42 0.197 to 1.654 4.5 to 43 0.177 to 1.693 0.276 to 1.378 20 to 5 to 40 0.197 to 1.575 7 to 38 +70 °C HYPR 4 to 43.5 0.157 to 1.713 6.5 to 34 0.256 to 1.339 0.276 to 1.496 STD 16 0.630 HYPR 60 2.362 32 1.260 24 0.945 13 0.512 2 to 6.5 0.079 to 0.256 0 to 10 60 to 0 to 0.394 0 to 25 +180 °C 0 to 0.984 Notes: 1) The sensing range of re ective type is the value for white non-glossy paper (50 × 50 mm 1.969 × 1.969 in glass substrate for FD-H30-L32, FD-H18-L31, transparent glass 100 × 100 × t0.7 mm 3.937 × 3.937 × t0.028 in for FD-H25-L43 and FD-H25-L45). 2) Note that the sensing range of the free-cut type ber may be reduced by 20 max. depending upon how the ber is cut. Fiber Dimensions Thru-beam Type 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type Others Amplifiers FX-500 series FX-100 series INDEX Fiber options /HQV)RUWKUXEHDP¿EHU P.30~ Earlier models comparison table 26 New product introduction Tough Fiber Vacuum-resistant Usable in high-temperatures of 300 °C 572 °F vacuum The leakage of FV-BR1 is still less than a very slight 1.33 × 10 10 Pa m3/s He , so that it can be used in vacuums with con dence. Fiber Selection Guide Choose by model FT-H30-M1V-S FD-H30-KZ1V-S Choose by shape/ application FD-H30-L32V-S Viewing new models Applications Highly resistant to repeated bending 'HWHFWLRQRIJODVVVXEVWUDWHLQYDFXXPFKDPEHU Fibers Vacuum resistant convergent reflective fiber Super Quality FD-H30-L32V-S Vacuum resistant long range reflective fiber FD-H30-KZ1V-S Vacuum resistant expansion lens Threaded Type Because it has a bending durability of over 100,000 times (R20 mm R0.79 in), it is highly resistant to repeated bending and is optimal for mounting on moving robot hand. FV-LE1 Cylindrical Type Vacuum resistant thru-beam fiber FT-H30-M1V-S 6OHHYH Flat Type Small Spot Narrow Beam Vacuum resistant thru-beam fiber Wide Beam FT-H30-M1V-S &RQYHUJHQW 5HIOHFWLYH Type Vacuum resistant side-view lens FV-SV2 5HWURUHIOHFWLYH Type Chemicalresistant Heatresistant Vacuumresistant Thru-beam type (one pair set) Liquid Leak / Liquid Detection Sensing range (mm in) Thru-beam Type FX-100 series INDEX Earlier models comparison table FT-H30-M1V-S (Note) R18 1m 30 FX-500 series STD 270 10.630 HYPR 1,000 39.370 FX-101 (Upper value) FX-102 (Lower value) U-LG LONG FAST H-SP 590 23.228 470 18.504 160 6.299 55 2.165 110 4.331 280 11.024 Beam axis dia. (mm) Ambient temp. ø1.2 30 to +300 °C Sensing range (mm in)(Note 2) Type Vacuum-resistant FX-500 series 300 °C Lens mountable (FV-LE1/SV2) M4 Model No. 5HÀHFWLYHW\SH 5HÀHFWLYH Type Amplifiers Shape of ber head (mm) Note: Sold as a set comprising vacuum type ber + photo-terminal (FV-BR1) + ber at atmospheric side (FT-J8). 5HWURUHÀHFWLYH Type Others Thru-beam Fiber Dimensions Convergent Re ective re ective Fiber Options Vacuumresistant Type Bending Fiber cable radius length (mm) : Free-cut Shape of ber head (mm) Model No. Bending Fiber cable radius length (mm) : Free-cut 300 °C, Rectangular head W9.5 × H5.2 × D15 U-LG LONG FAST H-SP FX-101 Ambient (Upper value) temp. FX-102 (Lower value) STD FD-H30-KZ1V-S (Note 1) 1m 10 to 340 0.394 to 13.386 25 to 80 20 to 200 0.787 to 7.874 15 to 270 0.591 to 10.630 0.984 to 3.150 20 to 120 0.787 to 4.724 10 to 220 HYPR 20 to 45 0.787 to 1.772 0.394 to 8.661 5 to 500 0.197 to 19.685 3m STD 8 0.315 HYPR 18 0.709 R18 300 °C, Glass substrate detection FD-H30-L32V-S (Note 1) W19 × H5 × D27 FX-500 series 30 to 12 0.472 2.5 to 6.5 +300 °C 10 0.394 0.098 to 0.256 5.5 0.217 0 to 11 1.5 to 3 0.059 to 0.118 0 to 0.433 Notes: 1) Sold as a set comprising vacuum type ber + photo-terminal (FV-BR1) + ber at atmospheric side (FT-J8). 2) The sensing range of re ective type is the value for transparent glass 100 × 100 × t0.7 mm 3.937 × 3.937 × t0.028 in. 27 New product introduction Tough Fiber Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Set contents Vacuum side Atmospheric side Digital fiber sensor Fibers Super Quality Vacuum resistant fibers Threaded Type Atmospheric side fiber (FT-J8) Chamber wall or flange (3.0 to 20 mm 0.118 to 0.787 in thick) Cylindrical Type Photo-terminals (FV-BR1) 6OHHYH Flat Type 0RGHO1RZKHQRUGHULQJLQGLYLGXDOSDUWVIURPUHSDLUSDUWV Ɣ Vacuum resistant ber FT-H30-M1V (one pair set) FD-H30-KZ1V FD-H30-L32V Ɣ Ɣ Photo-terminal FV-BR1 (one pair set) Atmospheric side ber FT-J8 (one pair set) Ɣ Small Spot Mounting bracket for FD-H30-KZ1V(-S) MS-FD-2 Narrow Beam Wide Beam &RQYHUJHQW 5HIOHFWLYH Type 5HWURUHIOHFWLYH Type Fiber options Chemicalresistant /HQV)RUWKUXEHDP¿EHU Heatresistant For thru-beam type ber Designation Vacuum resistant expansion lens (Note 1) Model No. Description Vacuumresistant FX-500 series Ampli er FV-LE1 Fiber Mode HYPR U-LG LONG STD 3,600 3,600 3,400 1,500 FT-H30-M1V-S 141.732 141.732 133.858 59.055 (Note 2) Vacuum resistant side-view lens (Note 1) Liquid Leak / Liquid Detection Increases the sensing range 4 times or more. Ambient temperature: 60 to +350 °C 76 to +662 °F (Note 3) Beam axis dia: ø3.6 mm ø0.142 in Sensing range (mm in) Lens on both sides (Note 4) (Note 2) FAST H-SP 900 35.433 370 14.567 FX-101 FX-102 450 17.717 1,600 62.992 Fiber Dimensions Beam axis is bent by 90°. Ambient temperature: 60 to +300 °C 76 to +572 °F (Note 3) Beam axis dia: ø3.7 mm ø0.146 in Sensing range (mm in) Lens on both sides (Note 4) Fiber Mode Thru-beam Type 5HWURUHÀHFWLYH Type FX-500 series Ampli er FV-SV2 HYPR U-LG LONG STD 3,600 3,600 3,400 1,500 FT-H30-M1V-S 141.732 141.732 133.858 59.055 (Note 2) (Note 2) Fiber Options FAST H-SP 900 35.433 370 14.567 FX-101 FX-102 450 17.717 1,600 62.992 Notes: 1) Be careful when installing the thru-beam type ber equipped with the lens, as the beam envelope becomes narrow and alignment is dif cult. 2) The ber cable length practically limits the sensing range. 3) Refer to P.26 for the ambient temperature of bers to be used in combination. 4) The ber cable length for the FT-H30-M1V-S is 1 m 3.281 ft. The sensing ranges in HYPR, U-LG and LONG of FX-500 series, in );Ƒ take into account the length of the FT-J8 atmospheric side ber. 5HÀHFWLYH Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table 28 New product introduction Tough Fiber Liquid Leak / Liquid Detection It corresponds to various liquid events, from the contact (wetted) type to the pipe mounting type, and up to leak detection. Fiber Selection Guide Choose by model Choose by shape/ application Applications 'HWHFWLQJOLTXLGOHYHOLQDWDQN Viewing new models Leak detection for use in semiconductor GHYLFHPDQXIDFWXULQJ FD-F71 Fibers Super Quality Threaded Type Cylindrical Type 6OHHYH Flat Type Small Spot Narrow Beam Wide Beam &RQYHUJHQW 5HIOHFWLYH Type 5HWURUHIOHFWLYH Type Chemicalresistant Heatresistant Vacuumresistant )RU OLTXLG VXUIDFH OHYHO XSSHU OLPLW VHQVLQJ D ZLWKRXW IOXLG LQFLGHQW OLJKW sensor is recommended. 7KHVHQVRUZLOOWXUQ2))GXULQJDEQRUPDOFRQGLWLRQVH[FHVVIOXLGILEHUGLVFRQQHFWLRQHWF Liquid absent: Beam received (Output ON) Liquid present / fiber is cutoff: Beam not received (Output OFF) FD-FA93 Applicable pipe: Transparent pipe, Outer diameter ø8 mm ø0.315 in or more 7KHVHQVRUZLOOWXUQ2))GXULQJDEQRUPDOFRQGLWLRQVLQVXI¿FLHQWOLTXLG¿EHUGLVFRQQHFWLRQHWF Liquid present: Beam received (Output ON) Liquid absent / fiber is cutoff: Beam not receired (Output OFF) FT-F93 Liquid level sensing Contact type FX-100 series INDEX Earlier models comparison table Pipe-mountable type Amplifiers Shape of ber head (mm) Heat resistant 125 °C Fluorine resin coating ø6 Heat resistant 105 °C Fluorine resin coating ø4 Heat resistant 70 °C Fluorine resin coating throughout the ber ø4 SEMI S2 compliant W20 × H30 × D10 Model No. FD-F8Y Bending radius (mm) Protective tube R40 Fiber R15 FD-HF40Y (Note 2) Protective tube R20 Fiber FD-F41Y R10 (Note 2) 7RXJK FD-F71 Fiber cable length : Free-cut Protective tube R20 Fiber R4 Description FX-500 series (STD mode) FX-101 FX-102 Protection Ambient temp. ø6 mm ø0.236 in 40 to Protective tube: Fluorine resin, length 1,000 mm 39.370 in (not cuttable) IP68 2m Liquid surface not contacted: Beam received, +125 °C (Note 1) Liquid surface contacted: Beam not received ø4 mm ø0.157 in 40 to Protective tube: Fluorine resin, length 500 mm 19.685 in (cuttable) Liquid surface not contacted: Beam received, +105 °C Liquid surface contacted: Beam not received 2m ø4 mm ø0.157 in 40 to Protective tube: Fluorine resin, length 500 mm 19.685 in (cuttable) IP67 +70 °C Liquid surface not contacted: Beam received, Liquid surface contacted: Beam not received 5m 20 to +60 °C Liquid leak detection Leak absent: Beam received, Leak present: Beam interrupted Bending durability Standard W25 × H13 × D20 FD-F41 R10 For 1 mm thick PFA pipe W25 × H13 × D20 Mountable on pipe array ber Liquid sensing Others leak Liquid level sensing Liquid detection 5HÀHFWLYH Type FX-500 series FT-F93 Thru-beam 5HÀHFWLYHW\SH7KUXEHDPW\SH Fiber Options 5HWURUHÀHFWLYH Type For 1 mm 0.039 in thick pipes manufactured by PFA We recommend using the sensor so that the output is ON when liquid is SUHVHQWDWORZHUOLPLWGHWHFWLRQOHYHO Type Thru-beam Type FD-F4 Standard type (When used with the tying bands: ø8 to ø80 mm ø0.315 to ø3.150 in) Liquid Leak / Liquid Detection Fiber Dimensions FD-F41 Strong against air bubbles FD-F41 FD-F4 W6.5 × H28.3 × D17 SEMI S2 compliant FD-F4 7RXJK FD-FA93 7RXJK FT-F93 W23 × H20 × D17 R4 Bending durability Protective tube R20 Fiber R2 Bending durability 2m Applicable pipe diameter: Outer dia. ø6 to ø26 mm ø0.236 to ø1.024 in transparent pipe PVC (vinyl chloride), uorine resin, polycarbonate, acrylic, glass, wall thickness 1 to 3 mm 0.039 to 0.118 in Liquid absent: Beam received, Liquid present: Beam not received Applicable pipe diameter: Outer dia. ø6 to ø26 mm ø0.236 to ø1.024 in transparent pipe PFA ( uorine resin) or equivalently transparent pipe, wall thickness 1 mm 0.039 in Liquid absent: Beam received, Liquid present: Beam not received Applicable pipe diameter: Outer dia. ø8 mm ø0.315 in or more transparent pipe (When used with the tying bands: ø8 to ø80 mm ø0.315 to ø3.150 in) PFA ( uorine resin), including translucent Liquid absent: Beam received, Liquid present: Beam not received Applicable pipe diameter: Outer dia. ø3 to ø10 mm ø0.118 to ø0.394 in transparent pipe PFA ( uorine resin) or equivalently transparent pipe, wall thickness 0.3 to 1 mm 0.012 to 0.039 in Liquid absent: Beam not received, Liquid present: Beam received 40 to +100 °C 40 to +70 °C IP40 40 to +60 °C Notes: 1) The allowable cutting range is 1,000 mm 39.370 in from the end that the ampli er inserted. 2) Liquid in ow prevention joint, protective tube extension joint, ber mounting joint is available. Please refer to next page for details. 7RXJK : It is a ber which possesses both unbreakable (bending radius: R10 mm, reciprocating bending: 180°) and bendable (bending radius: R4 mm or less) features. 29 New product introduction Tough Fiber Fiber Selection Guide Choose by model Accessories Ɣ MS-FD-F7-1 (SUS mounting bracket for FD-F71) Ɣ MS-FD-F7-2 (PVC mounting bracket for FD-F71) Fiber options Designation Choose by shape/ application Viewing new models Fibers Model No. Super Quality Description Threaded Type Protective tube extension joint (Note) Fiber mounting joint (Note) MS-FX-01Y MS-FX-02Y Applicable bers Liquid in ow prevention joint (Note) This joint suppresses false operations due to liquid slip-in from the top of the protective tube. Cylindrical Type The protective tube can be extended. Flat Type 6OHHYH FD-HF40Y FD-F41Y Small Spot The joint is used for mounting bers on a tank. MS-FX-03Y Note: The joint internal ferrule (MS-FX-YF) is available as a spare part. A distorted ferrule may result in leakage. Narrow Beam Wide Beam &RQYHUJHQW 5HIOHFWLYH Type /LTXLGLQÀRZSUHYHQWLRQMRLQW 3URWHFWLYHWXEHH[WHQVLRQMRLQW )LEHUPRXQWLQJMRLQW ‡MS-FX-01Y ‡MS-FX-02Y ‡MS-FX-03Y Chemicalresistant Heatresistant Union nut Ferrule (MS-FX-YF) Union nut Body Ferrule (MS-FX-YF) Ferrule (MS-FX-YF) Body Union nut 5HWURUHIOHFWLYH Type Body Vacuumresistant Liquid Leak / Liquid Detection Ferrule (MS-FX-YF) Union nut Fiber Options Fiber Dimensions Thru-beam Type 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table 30 Fiber options New product introduction Tough Fiber Fiber Selection Guide /HQV)RUWKUXEHDPW\SH¿EHU Designation Model No. Description Increases the sensing range by 5 times or more. Ambient temperature: -60 to +350 °C -76 to +662 °F (Note 3) Beam dia: ø3.6 mm ø0.142 in Sensing range (mm in) [Lens on both sides] Choose by model Choose by shape/ application Fiber Mode FT-43 Super Quality Threaded Type Expansion lens (Note 1) Cylindrical Type Flat Type 5HWURUHIOHFWLYH Type Chemicalresistant Heatresistant For thru-beam type ber &RQYHUJHQW 5HIOHFWLYH Type Thru-beam Type 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type INDEX Earlier models comparison table 3,600 141.732 3,600 141.732 1,600 62.992 2,400 94.488 3,600 141.732 2,200 86.614 3,400 133.858 3,600 141.732 1,500 59.055 1,600 62.992 1,600 62.992 (Note 2) (Note 2) (Note 2) 3,600 141.732 (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) FT-45X 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 (Note 2) (Note 2) (Note 2) (Note 2) 1,600 62.992 1,600 62.992 1,600 62.992 (Note 2) (Note 2) 1,600 62.992 1,600 62.992 (Note 2) (Note 2) 3,600 141.732 3,600 141.732 (Note 2) (Note 2) FT-H20-J50-S FT-H20-J30-S FT-H20-J20-S (Note 2) (Note 2) 1,900 74.803 3,100 122.047 3,600 141.732 3,300 129.921 1,400 55.118 2,000 78.740 3,500 137.795 1,600 62.992 1,600 62.992 (Note 2) (Note 2) 1,300 51.181 1,600 62.992 (Note 2) 850 33.465 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 (Note 2) (Note 2) (Note 2) 1,200 47.244 (Note 2) (Note 2) 3,500 137.795 2,000 78.740 1,600 62.992 500 19.685 1,000 39.370 (Note 2) (Note 2) (Note 2) 3,500 137.795 (Note 2) Tremendously increases the sensing range with large diameter lenses. Ambient temperature: -60 to +350 °C -76 to +662 °F (Note 3) Beam dia: ø9.8 mm ø0.386 in Sensing range (mm in) [Lens on both sides] FX-500 series Ampli er Fiber Mode FT-43 FT-42 FT-42W FT-45X Superexpansion lens (Note 1) FX-LE2 FT-R40 FT-H35-M2 FT-H20W-M1 FT-H20-M1 FT-H20-J50-S FT-H20-J30-S FT-H20-J20-S FX-100 series 3,600 141.732 3,600 141.732 FT-H13-FM2 FX-500 series 3,600 141.732 (Note 2) Others Amplifiers 3,600 141.732 3,600 141.732 FT-H20-M1 Liquid Leak / Liquid Detection Fiber Dimensions H-SP (Note 2) Vacuumresistant Fiber Options FAST 3,600 141.732 FT-H20W-M1 Narrow Beam STD (Note 2) FT-H35-M2 Small Spot LONG 3,600 141.732 FT-R40 6OHHYH U-LG (Note 2) FX-LE1 FX-101 FX-102 HYPR FT-42 FT-42W Fibers Wide Beam FX-500 series Ampli er Viewing new models FX-101 FX-102 HYPR U-LG LONG STD FAST H-SP 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,500 137.795 3,500 137.795 (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,500 137.795 3,500 137.795 (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,500 137.795 3,500 137.795 (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) Notes: 1) Be careful sure to use it only after you have adjusted it suf ciently when installing the thru-beam type ber equipped with the expansion lens, as the beam envelope becomes narrow and alignment is dif cult. 2) The ber cable length practically limits the sensing range. 3) Refer to P.10~ for the ambient temperature of bers to be used in combination. 31 Fiber options New product introduction Tough Fiber /HQV)RUWKUXEHDPW\SH¿EHU Designation Model No. Description Fiber Selection Guide Beam axis is bent by 90°. Ambient temperature: -60 to +300 °C -76 to +572 °F (Note 4) Beam dia: ø2.8 mm ø0.110 in Sensing range (mm in) [Lens on both sides] Mode FT-43 Side-view lens FX-SV1 LONG STD FAST H-SP 3,600 141.732 3,400 133.858 2,600 102.362 1,700 66.929 970 38.189 310 12.205 510 20.079 1,400 55.118 3,600 141.732 3,600 141.732 3,600 141.732 (Note 2) (Note 2) (Note 2) 2,100 82.677 1,150 45.276 370 14.567 500 19.685 1,700 66.929 3,500 137.795 2,700 106.299 1,800 70.866 990 38.976 320 12.598 480 18.898 1,300 51.181 1,600 62.992 1,600 62.992 1,600 62.992 (Note 2) (Note 2) 800 31.496 210 8.268 540 21.260 1,600 62.992 (Note 2) 1,400 55.118 (Note 2) 6OHHYH 3,500 137.795 1,600 62.992 1,600 62.992 1,600 62.992 1,200 47.244 780 30.709 500 19.685 150 5.906 280 11.024 800 31.496 Flat Type (Note 2) 1,500 59.055 950 37.402 560 22.047 190 7.480 140 5.512 400 15.748 Small Spot (Note 2) 1,600 62.992 1,600 62.992 (Note 2) (Note 2) 1,300 51.181 780 30.709 500 19.685 150 5.906 280 11.024 840 33.071 740 29.134 450 17.717 290 11.417 80 3.150 150 5.906 410 16.142 (Note 2) FT-45X For thru-beam type ber FT-H35-M2 FT-H20W-M1 FT-H20-M1 FT-H20-J50-S FT-H20-J30-S FT-H20-J20-S Expansion lens for vacuum ber (Note 1) Vacuumresistant side-view lens (Note 1) 1,600 62.992 (Note 2) 960 37.795 Fibers HYPR U-LG LONG STD FAST H-SP FT-H30-M1V-S 3,600 141.732 3,600 141.732 (Note 2) (Note 2) 3,400 133.858 1,500 59.055 900 35.433 370 14.567 FX-101 FX-102 450 17.717 1,600 62.992 Beam axis is bent by 90°. Ambient temperature: -60 to +300 °C -76 to +572 °F (Note 4) Beam dia: ø3.7 mm ø0.146 in Sensing range (mm in) [Lens on both sides] (Note 3) Narrow Beam Wide Beam &RQYHUJHQW 5HIOHFWLYH Type Vacuumresistant Liquid Leak / Liquid Detection Fiber Options FX-500 series Ampli er Mode HYPR U-LG LONG STD FAST H-SP FT-H30-M1V-S 3,600 141.732 3,600 141.732 (Note 2) (Note 2) 3,400 133.858 1,500 59.055 900 35.433 370 14.567 Fiber Cylindrical Type Heatresistant Mode FV-SV2 Threaded Type Chemicalresistant FX-500 series Ampli er Fiber Super Quality 5HWURUHIOHFWLYH Type Sensing range increases by 4 times or more. Ambient temperature: -60 to +350 °C -76 to +662 °F (Note 4) Beam dia: ø3.6 mm ø0.142 in Sensing range (mm in) [Lens on both sides] (Note 3) FV-LE1 Viewing new models U-LG 3,600 141.732 FT-42W FX-101 FX-102 HYPR (Note 2) FT-42 Choose by shape/ application FX-500 series Ampli er Fiber Choose by model FX-101 FX-102 450 17.717 1,600 62.992 Notes: 1) Be careful sure to use it only after you have adjusted it suf ciently when installing the thru-beam type ber equipped with the expansion lens, as the beam envelope becomes narrow and alignment is dif cult. 2) The ber cable length practically limits the sensing range. 3) The ber cable length for the FT-H30-M1V-S is 1 m 3.28 ft. The sensing ranges in HYPR, U-LG and LONG of FX-500 series, in );Ƒ take into account the length of the FT-J8 atmospheric side ber. 4) Refer to P.10~ for the ambient temperature of bers to be used in combination. Fiber Dimensions Thru-beam Type 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table 32 Fiber options New product introduction Tough Fiber /HQV)RUUHÀHFWLYHW\SH¿EHU Designation Model No. Description Fiber Selection Guide Pinpoint spot of ø0.5 mm ø0.020 in. Enables detection of minute objects or small marks. Pinpoint spot lens Choose by model Distance to focal point: 6 ± 1 mm 0.236 ± 0.039 in Applicable bers: FD-42G, FD-42GW Ambient temperature: -40 to +70 °C -40 to +158 °F (Note) FX-MR1 Choose by shape/ application The spot diameter is adjustable from ø0.7 to ø2 Sensing range mm ø0.028 to ø0.079 in according to how much Screw-in depth Distance to focal point Spot diameter the ber is screwed in. Applicable bers: FD-42G, FD-42GW 7 mm 18.5 mm approx. ø0.7 mm Ambient temperature:-40 to +70 °C 27 mm approx. ø1.2 mm 12 mm -40 to +158 °F (Note) Spot Accessory: MS-EX3 (mounting bracket) 43 mm approx. ø2.0 mm 14 mm diameter Screw-in depth Viewing new models Zoom lens FX-MR2 Distance to focal point Fibers Threaded Type Cylindrical Type 6OHHYH Flat Type Small Spot Narrow Beam Wide Beam For re ective type ber Super Quality Finest spot lens FX-MR3 Distance to focal point Spot diameter Finest spot lens FX-MR6 &RQYHUJHQW 5HIOHFWLYH Type 5HWURUHIOHFWLYH Type Chemicalresistant Heatresistant Sensing range Extremely ne spot of ø0.1 mm ø0.004 in approx. achieved. Applicable bers: FD-EG31, FD-EG30, FD-42G, FD-42GW, FD-32G, FD-32GX Ambient temperature: -20 to +60 °C -4 to +140 °F (Note) Sensing range Screw-in FX-MR2 is converted into a side-view type and depth side-view type FX-MR5 Fiber model No. Distance to focal point Spot diameter Distance to focal point FD-EG31 7.5 ± 0.5 mm ø0.15 mm approx. FD-EG30 7.5 ± 0.5 mm ø0.3 mm approx. FD-42G/42GW 7.5 ± 0.5 mm ø0.5 mm approx. FD-32G/32GX Fiber model No. Distance to focal point Spot diameter FD-EG31 7 ± 0.5 mm ø0.1 mm approx. FD-EG30 7 ± 0.5 mm ø0.2 mm approx. FD-42G/42GW FD-32G/32GX 7 ± 0.5 mm ø0.4 mm approx. Sensing range can be mounted in a very small space. Applicable bers: FD-42G, FD-42GW Ambient temperature: -40 to +70 °C -40 to +158 °F (Note) Zoom lens Vacuumresistant Liquid Leak / Liquid Detection Extremely ne spot of ø0.15 mm ø0.006 in approx. achieved. Applicable bers: FD-EG31, FD-EG30, FD-42G, FD-42GW, FD-32G, FD-32GX Ambient temperature: -40 to +70 °C -40 to +158 °F (Note) Screw-in depth Distance to focal point Spot diameter Spot diameter 8 mm 13 mm approx. ø0.5 mm 10 mm 15 mm approx. ø0.8 mm 14 mm 30 mm approx. ø3.0 mm Note: Refer to P.11~ for the ambient temperature of bers to be used in combination. 0RGHO1RZKHQRUGHULQJKHDWUHVLVWDQW¿EHUVLQGLYLGXDOO\DVUHSODFHPHQWSDUWV Fiber Options Heat-resistant side ber one pair set FT-H20-J20, FT-H20-J30, FT-H20-J50, FT-H20-VJ50, FT-H20-VJ80 0RGHO1RZKHQRUGHULQJYDFXXPUHVLVWDQW¿EHUVLQGLYLGXDOO\DVUHSODFHPHQWSDUWV Fiber Dimensions Thru-beam Type 5HWURUHÀHFWLYH Type Vacuum-resistant ber FD-H30W-M1V (one pair set) FD-H30-KZ1V FD-H30-L32V Fiber at atmospheric side FT-J8 (one pair set) Photo-terminal FV-BR1 (one pair set) Mouting bracket for FD-H30-KZ1V(-S) MS-FD-2 5HÀHFWLYH Type Others Amplifiers FX-500 series FX-100 series INDEX $FFHVVRULHVDWWDFKHGZLWK¿EHUV RF-003 (FR-KZ50E/KZ50H exclusive re ector) RF-13 (Re ective tape) FX-CT1 (Fiber cutter) FX-CT2 (Fiber cutter) FX-CT3 (Fiber cutter) FX-AT2 (Attachment for xed-length ber, Orange) FX-AT3 (Attachment for ø2.2 mm ø0.087 in ber, Clear orange) FX-AT4 (Attachment for ø1 mm ø0.039 in ber, Black) FX-AT5 (Attachment for ø1.3 mm ø0.051 in ber, Gray) FX-AT6 Attachment for ø1 mm ø0.039 in / ø1.3 mm ø0.051 in ( mixed ber, Black / Gray MS-FD-2 (Fiber mounting bracket) Earlier models comparison table RF-003 ) RF-13 FX-AT2 FX-CT1 FX-AT3 MS-FD-2 FX-CT2 FX-AT4 FX-AT5 FX-CT3 FX-AT6 33 Fiber options New product introduction Tough Fiber 3URWHFWLYHWXEH Others Designation Model No. FTP-500 (0.5 m 1.640 ft) FTP-1000 (1 m 3.281 ft) ( ) FT-42 FT-42S FT-42W For M4 thread FTP-1500 (1.5 m 4.921 ft) FTP-N500 (0.5 m 1.640 ft) FTP-N1000 (1 m 3.281 ft) For M3 thread FTP-N1500 (1.5 m 4.921 ft) FDP-500 (0.5 m 1.640 ft) FDP-1000 (1 m 3.281 ft) Protective tube For re ective type ber ( ) For M6 thread FDP-1500 (1.5 m 4.921 ft) FT-43 FT-H13-FM2 Choose by model FT-31 FT-31S FT-31W FD-61 FD-61G FD-61S FD-61W FD-41 FD-41W For M4 thread FD-41S FD-41SW FB-1 The ber bender bends the sleeve part of the ber head at the proper radius. (Note 1) Universal sensor mounting stand (Note 2) MS-AJ1-F Horizontal mounting type MS-AJ2-F Vertical mounting type Single core holder Applicable bers Fiber mounting joint (Note 2) FD-HF40Y FD-F41Y Super Quality 8QLYHUVDOVHQVRUPRXQWLQJVWDQG Threaded Type Using the arm which enables adjustment in the horizontal direction, sensing can also be done from above an assembly line. Cylindrical Type 360° rotation 20° 20° Angle adjustment: ±20° RF-220 &RQYHUJHQW 5HIOHFWLYH Type Heatresistant Vacuumresistant Forward / back adjustment: 130 mm 5.118 in approx. 20° 20° Angle adjustment: ±20° RF-230 Wide Beam Chemicalresistant 360° rotation It is available for FR-Z50HW. Refer to P.22 for the sensing range of FR-Z50HW to be used in combination. Narrow Beam 5HWURUHIOHFWLYH Type ‡MS-AJ2-F 360° rotation RF-210 Height adjustment: 150 mm 5.906 in approx. Mounting hole for M6 screw The protective tube can be extended. The incident light intensity may vary when using a multi-core ber or a thin type sharp bending ber. This holder suppresses the variation in the incident light intensity. (Brown) 6OHHYH Flat Type Small Spot Forward / back adjustment: 130 mm 5.118 in approx. 360° rotation The joint is used for mounting bers on a tank. MS-FX-03Y FX-AT15A Re ector Mounting stand assembly for ber (For M3, M4 or M6 threaded head ber) This joint suppresses false operations due to liquid slip-in from the top of the protective tube. MS-FX-01Y MS-FX-02Y Fibers ‡MS-AJ1-F Fiber bender Protective tube extension joint (Note 2) Viewing new models The protective tube, made of noncorrosive stainless steel, protects the FD-62 inner ber cable from FD-H13-FM2 any external forces. FDP-N1500 (1.5 m 4.921 ft) Liquid in ow prevention joint (Note 2) Choose by shape/ application ‡FB-1 FD-31 FD-31W FDP-N500 (0.5 m 1.640 ft) FDP-N1000 (1 m 3.281 ft) Fiber Selection Guide Fiber bender Applicable bers Protective tube For thru-beam type ber )73Ƒ )'3Ƒ Description Height adjustment: 150 mm 5.906 in approx. Mounting hole for M6 screw Liquid Leak / Liquid Detection Fiber Options Single core holder Notes: 1) Do not bend the sleeve part of any side-view type ber or ultra-small diameter head type ber. 2) The joint internal ferrule (MS-FX-YF) is available as a spare part. A distorted ferrule may result in leakage. ‡FX-AT15A Fiber Dimensions Thru-beam Type /LTXLGLQÀRZSUHYHQWLRQMRLQW 3URWHFWLYHWXEHH[WHQVLRQMRLQW )LEHUPRXQWLQJMRLQW ‡MS-FX-01Y ‡MS-FX-02Y ‡MS-FX-03Y 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type Union nut Others Ferrule (MS-FX-YF) Union nut Body Ferrule (MS-FX-YF) Ferrule (MS-FX-YF) Body Union nut Body Ferrule (MS-FX-YF) Amplifiers FX-500 series Union nut FX-100 series 5HÀHFWRU RF-210 RF-220 11 mm RF-230 8.3 mm 8.3 mm 33.3 mm 50.3 mm 35.3 mm INDEX 12.8 mm 42.3 mm 59.3 mm Earlier models comparison table 34 New product introduction Tough Fiber DIMENSIONS (Unit: mm in) Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the ampli ers. The CAD data in the dimensions can be downloaded from our website. Dimensions are listed in the order of thru-beam type, retrore ective type, and re ective type, and in alphabetic order of the model No. 7KUXEHDPW\SH¿EHUV Free-cut FT-140 Fiber Selection Guide &KRRVH by model &KRRVH E\VKDSH application ø23 ø0.906 19 0.748 ø10 ø0.394 ø10 ø0.394 Lens (PMMA) 17 23 0.906 0.669 8 8 3.5 0.315 0.315 0.138 Viewing QHZPRGHOV Holder (ABS) Toothed lock washer M14 [Iron(Chromed)] Free-cut FT-31 Cylindrical Type Sleeve 2 0.079 ø6.5 ø0.256 2.7 0.106 Flat Type Wide Beam Convergent Reflective Type Retroreflective Type 10 0.394 VacuumUHVLVWDQW Liquid Leak / Liquid Detection Fiber 2SWLRQV Fiber 'LPHQVLRQV Thru-beam Type FX-500 VHULHV FX-100 VHULHV Opposing faces 5.5 0.217 thickness 1.8 0.071 [Brass(Nickel plated)] Free-cut ø1 ø0.039 2.7 0.106 5.5 0.217 40 1.575 Allowable 10 bending 10 0.394 range 0.394 ø0.88 ø0.035 Sleeve [Stainless steel(SUS304)] (ø2) (ø0.079) Model No. tube (PVC) 5 0.197 10 0.394 2,000 78.740 1.8 0.071 (30) (1.181) ø0.5 ø0.020 fiber core × 1 (PMMA) Sheath ø1 ø0.039 (Polyethylene) Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS304)] M3 × 0.5 0.020 End bracket [Stainless steel(SUS303)] Toothed lock washer M3 [Stainless steel(SUS304)] Toothed lock washer M3 [Stainless steel(SUS304)] Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS304)] Free-cut FT-40 ø6.5 ø0.256 2.7 0.106 10 0.394 2 5.5 0.079 0.217 2,000 78.740 1.8 0.071 (30)(1.181) Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS304)] Free-cut FT-42 3 0.118 ø8.5 ø0.335 1 0.039 ø2 3.5 0.138 ø0.079 ø8.5 ø0.335 ø1 ø0.039 (ø2)(ø0.079)Model No. tube(PVC) ø0.5 ø0.020 fiber core × 1 (PMMA) Sheath ø1 ø0.039 (Polyethylene) End bracket [Stainless steel(SUS303)] -0.1 -0.004 ø3 ø0.118 -0.13 -0.005 Mounting reference surface (Screw periphery) ø2 ø0.079 M3 × 0.5 0.020 Toothed lock washer M3 [Stainless steel(SUS304)] 3.5 0.138 2,000 78.740 Resin plug(ABS) (ø4.33) (20) ø2.2 (ø0.170) (0.787) ø0.087 12 0.472 3 0.118 2.4 0.094 1 0.039 ø2 ø0.079 (19.7) (0.776) 10.2 0.402 (0.3) (0.012) ø2.2 ø1.8 (ø3.2) (ø0.126) Model No. tube (PVC) ø0.087 ø0.071 Toothed lock washer M4 [Brass(Nickel plated)] ø4 ø0.157 Mounting reference surface (Screw periphery) End bracket [Brass(Nickel plated)] Opposing faces 7 0.276 thickness 2.4 0.094 [Brass(Nickel plated)] M2.6 × 0.45 0.018 M4 × 0.7 0.028 Free-cut FT-42S 2,000 78.740 12 0.472 2.4 0.094 ø2.2 ø0.087 (30) (1.181) ø1 ø0.039 fiber core × 1 (Acrylic) Sheath ø2.2 ø0.087 (Polyethylene) ø4 ø0.157 -0.1 0.004 -0.13 0.005 Mounting reference surface (Screw periphery) End bracket [Stainless steel(SUS303)] (ø3.2) (ø0.126) Model No. tube (PVC) Toothed lock washer M4 [Stainless steel(SUS304)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] M2.6 × 0.45 0.018 M4 × 0.7 0.028 Free-cut FT-42W ø8.5 ø0.335 7 0.276 3.5 0.138 12 0.472 40 1.575 Allowable 10 bending 10 0.394 range 0.394 5 0.197 2,000 78.740 2.4 0.094 ø2.5 ø0.098 ø1.48 ø0.058 Sleeve[Stainless steel(SUS304)] M4 × 0.7 0.028 Toothed lock washer M4[Stainless steel(SUS304)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] 3 7 0.276 0.118 3.5 0.138 1 0.039 12 0.472 2,000 78.740 2.4 0.094 (30) (1.181) ø2.2 ø0.087 ø2 -0.1 -0.004 ø4 ø0.157 -0.13 -0.005 ø0.079 Mounting reference surface (Screw periphery) M2.6 × 0.45 0.018 M4 × 0.75 0.030 Toothed lock washer M4 [Stainless steel(SUS304)] (ø3.2)(ø0.126) Model No. tube (PVC) ø1 ø0.039 fiber core × 1 (PMMA) Sheath ø2.2 ø0.087 (Polyethylene) End bracket [Stainless steel(SUS303)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] ø2.2 ø0.087 (30) (1.181) (ø3.2)(ø0.126) Model No. tube (PVC) ø1 ø0.039 fiber core × 1 (PMMA) Sheath ø2.2 ø0.087 (Polyethylene) End bracket[Stainless steel(SUS303)] Free-cut FT-43 ø8.5 ø0.335 ø1 ø0.039 (ø2)(ø0.079) Model No. tube (PVC) ø2 ø0.079 ø8.5 ø0.335 7 0.276 3.5 0.138 3 0.118 1 0.039 2,000 78.740 12 0.472 INDEX (DUOLHUPRGHOV FRPSDULVRQ table 0.402 (0.3) (0.012) FT-31S ø0.5 ø0.020 fiber core × 1 (Acrylic) Sheath ø1 ø0.039 (Polyethylene) 5HÀHFWLYH Type $PSOLILHUV (19.7) (0.776) 10.2 ø2.2 ø1.8 (ø2) (ø0.079) Model No. tube (PVC) ø0.087 ø0.071 Toothed lock washer M3 [Brass(Nickel plated)] M3 × 0.5 0.020 ø6.5 ø0.256 FT-31W 5HWURUHÀHFWLYH Type 2WKHUV 10 0.394 ø3 ø0.118 Mounting reference surface (Screw periphery) End bracket [Brass(Nickel plated)] 2,000 78.740 1.8 0.071 (30) (1.181) ø2 ø0.079 ø3 ø0.118 -0.10 -0.004 -0.13 -0.005 Mounting reference surface (Screw periphery) End bracket [Stainless steel(SUS303)] M3 × 0.5 0.020 ChemicalUHVLVWDQW HeatUHVLVWDQW 2,000 78.740 1.8 Resin plug(ABS) 0.071 ø1 (ø4.33)(ø0.170) (20) (0.787) ø0.039 Small Spot Narrow Beam ø2.2 ø0.087 (30) (1.181) Hexagon nut M14 [Brass(Nickel plated)] Super Quality Threaded Type 2 ø6.5 ø0.256 0.079 2.7 0.106 ø2 ø0.079 10,000 393.701 (ø3.2)(ø0.126) Model No. tube (PVC) ø4.5 ø0.177 ø1 ø0.039 fiber core × 1 (PMMA) ø4.5 ø0.276 Sheath ø2.2 ø0.087(Polyethylene) Protector (PVC) M14 × 1 0.039 )LEHUV FT-30 ø2 -0.1 -0.004 ø4 ø0.157 -0.13 -0.005 ø0.079 Mounting reference surface (Screw periphery) M4 × M2.6 × 0.45 0.018 0.7 0.028 Toothed lock washer M4[Stainless steel(SUS304)] 2.4 0.094 (30) (1.181) ø2.2 ø0.087 (ø3.2)(ø0.126) Model No. tube (PVC) ø1.5 ø0.059 fiber core × 1 (PMMA) Sheath ø2.2 ø0.087(Polyethylene) End bracket[Stainless steel(SUS303)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] 35 DIMENSIONS (Unit: mm in) Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the ampli ers. The CAD data in the dimensions can be downloaded from our website. Dimensions are listed in the order of thru-beam type, retrore ective type, and re ective type, and in alphabetic order of the model No. 7KUXEHDPW\SH¿EHUV FT-45X ø2.2 ø0.087 (ø4)(ø0.157) Model No. tube(PVC) Resin plug(ABS) Protective tube Polyolefin tube included SUS304 spiral tube Crimping part 4.2 0.165 Free-cut FT-A11W Lens(Norbornene resin) Sensing face(2.2 × 11)(0.087 × 0.433) 8 0.315 (8) (0.315) (13.5) 9.5 0.374 (0.531) Free-cut FT-A32 Center of beam axis ø0.75 ø0.030 fiber core × 1 (PMMA) Sheath ø1.3 ø0.051 (Polyethylene) Center of beam axis 19 0.748 4 0.157 27 1.063 2,000 78.740 Beam axis 4 0.157 5.2 0.205 (8)(0.315) ø1.3 ø0.051 4.2 0.165 (13.5) 9.5 (0.531) 0.374 5 0.197 2-R 4R 0.1 57 ø1 ø0.039 fiber core × 1 (PMMA) Sheath ø1.3 ø0.051 (Polyethylene) 4 19 0.748 0.157 2-ø3.2 ø0.126 ø6.0 ø0.236 countersinking (on both sides) Enclosure (PC) (19) (0.748) 16 (20) 0.630 (0.787) 4 2-R Free-cut FT-A32W 157 R0. Sensing face(3.2 × 32)(0.126 × 1.260) Lens(Norbornene resin) 4 0.157 65 2.559 2,000 78.740 Beam axis Enclosure(PC) 5.2 0.205 ø1.3 ø0.051 7.3 0.287 12 0.472 2-ø3.2 ø0.126 ø6 ø0.236 countersinking(on both sides) 45 1.772 Free-cut FT-AL05 Center of beam axis (19) (0.748) 16 (20) 0.630 (0.787) Sensing face (3.2 × 32) (0.126 × 1.260) Lens (Norbornene resin) 4 0.157 65 2.559 2,000 78.740 Beam Enclosure(PC) 5.2 axis 0.205 ø1.3 ø0.051 7.3 0.287 .157 12 4 R0 2-R 0.472 Free-cut 1,000 39.370 15 0.591 2-M3 × 0.5 0.020 15 10 0.394 0.591 ø2.2 ø0.087 4.5 0.177 ø0.25 ø0.010 fiber core × 16 (PMMA) Sheath ø2.2 ø0.087 (Polyethylene) Enclosure(PPS) 5.25 0.207 Flat Type Small Spot Narrow Beam Wide Beam Convergent Reflective Type Retroreflective Type ChemicalUHVLVWDQW VacuumUHVLVWDQW Liquid Leak / Liquid Detection Fiber 2SWLRQV Free-cut FT-E23 ø1 (30) ø0.039 (1.181) 5±0.5 0.197±0.020 15 0.591 5±0.5 0.197±0.020 ø0.5 ø0.020 fiber core × 1 (PMMA) Sheath ø1 ø0.039 (Polyethylene) End bracket [Stainless steel (SUS303)] Details of ø3 ø0.118 0 0 -0.1 -0.004 sensing part Mounting reference surface (Periphery) (ø2) (ø0.079) Model No. tube (PVC) End bracket [Stainless steel (SUS303)] ø0.25 ø0.010 0 0 -0.1 -0.004 1,000 39.370 2,000 78.740 2-ø1 ø0.039 Beam-emitting side (Gray) 5.5 0.217 6 0.236 9 0.354 Beam-receiving side (Black) ø0.25 ø0.010 × 4 fiber core (PMMA) Sheath ø1 ø0.039 (Polyethylene) ø3.1 ø0.122 Protective tube (PFA) ø3.1 ø0.122 2WKHUV $PSOLILHUV FX-500 VHULHV FX-100 VHULHV Free-cut 3.5 0.138 3 0.118 7.2 0.283 6 0.236 Enclosure (ABS) ø0.5 ø0.020 × 1 fiber core (PMMA) Sheath ø1 ø0.039 (Polyethylene) FT-H13-FM2 10.3 0.406 5HÀHFWLYH Type 0 0 ø4 ø0.016 -0.1 -0.004 Free-cut Thru-beam Type 5HWURUHÀHFWLYH Type ø0.25 ø0.010 fiber core ×1 (PMMA) FT-F93 Fiber 'LPHQVLRQV 0 0 Details of (ø2) (ø0.079) Model No. tube (PVC) ø3 ø0.118 -0.1 -0.004 sensing part Mounting reference surface (Periphery) ø0.125 ø0.005 fiber core × 1 (PMMA) 20 0.787 12 0.472 1,000 39.370 ø1 (30) ø0.039 (1.181) Sleeve [Stainless steel (SUS304)] Sleeve [Stainless steel (SUS304)] 17 0.669 Cylindrical Type Sensing part(ø0.25 fiber core ø0.010 × 16) FT-E13 23 0.906 Threaded Type HeatUHVLVWDQW 2.5 0.098 2.5 0.098 4.5 Details of 0.177 sensing part 1 0.039 2-ø3.2 ø0.126 ø6 ø0.236 countersinking(on both sides) 45 1.772 2,000 78.740 15 0.591 8 0.315 5 0.197 Head block (LCP) ø1 ø0.039 fiber core × 1 (PMMA) Sheath ø1.3 ø0.051 (Polyethylene) 5 0.197 )LEHUV Sleeve Lens (Norbornene resin) Sensing face (2.2 × 11) (0.087 × 0.433) 19 0.748 Viewing QHZPRGHOV Super Quality 8 0.315 &KRRVH E\VKDSH application ø0.75 ø0.030 fiber core × 1 (PMMA) Sheath ø1.3 ø0.051 (Polyethylene) 2-ø3.2 ø0.126 ø6.0 ø0.236 countersinking (on both sides) Enclosure(PC) 19 4 0.157 0.748 Fiber Selection Guide &KRRVH by model 4 0.157 27 1.063 2,000 78.740 Beam axis 4 0.157 ø1.3 5.2 0.205 ø0.051 R0 .1 57 ø2 ø0.079 M4 × 0.7 0.028 Toothed lock washer M4 Details of sensing part [Stainless steel(SUS304)] 3.5 0.138 Opposing faces 7 0.276 thickness 2.4 0.094 End bracket [Stainless steel(SUS304)] [Stainless steel (SUS303)] ø1 ø0.039 fiber core × 1 (PMMA) ø8.5 ø0.335 Center of beam axis 2R4 3 0.118 1 0.039 2.4 0.094 M2.6 × 0.45 0.018 7 0.276 1,000 39.370 19.7 0.776 (2.5)(0.098) ø2.6 ø0.102 (ø4.33)(ø0.170) (30) 10.2 (1.181) 0.402 Tough Fiber Free-cut FT-A11 20 0.787 12 0.472 New product introduction ø1.5 ø0.059 fiber core × 1 13 0.512 12 0.472 ø3 ø0.118 M4 × 0.7 0.028 Screw tightening face INDEX 2,000 78.740 ø2.2 ø0.087 (Fluorine resin) Opposing faces 7 0.276, thickness 2.4 0.094 Toothed lock washer ø8.5 ø0.335 (DUOLHUPRGHOV FRPSDULVRQ table 36 New product introduction Tough Fiber Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the ampli ers. The CAD data in the dimensions can be downloaded from our website. DIMENSIONS (Unit: mm in) Dimensions are listed in the order of thru-beam type, retrore ective type, and re ective type, and in alphabetic order of the model No. 7KUXEHDPW\SH¿EHUV Free-cut (Note) FT-H20-J20-S FT-H20-J30-S FT-H20-J50-S Fiber Selection Guide &KRRVH by model &KRRVH E\VKDSH application Viewing QHZPRGHOV )LEHUV Super Quality +HDWUHVLVWDQWVLGHXQLWGLDJUDPVLGHYLHZ 3 0.118 2.5 0.098 M2.6 × 0.45 0.018 M4 × 0.7 0.028 End bracket [Brass (nickel plated)] Beam axis ø4 ø0.157 2UGLQDU\WHPSHUDWXUHVLGH¿EHU)7)0FRQQHFWLRQGLDJUDPIURQWYLHZ B (25.8) (1.016) 17 0.669 6 0.236 Cylindrical Type Sleeve 20 0.787 ø2.2 ø0.087 (ø4.0) (ø0.157) Model No. tube (PVC) M4 × 0.7 0.028 Opposing faces 7 0.276, ø1 ø0.039 fiber core × 1 (Acrylic) thickness 3.2 0.126 Outer sheath ø2.2 ø0.087 (Polyethylene) (Polypropylene) Small Spot Model No. A B 185 +30 0 Wide Beam FT-H20-J20-S 200 +25 0 Convergent Reflective Type FT-H20-J30-S 300 +25 11.811 +0.984 0 0 285 +30 11.221 +1.181 0 0 FT-H20-J50-S 500 +25 19.685 +0.984 0 0 +1.181 485 +30 0 19.095 0 ChemicalUHVLVWDQW HeatUHVLVWDQW Fiber 2SWLRQV Fiber 'LPHQVLRQV 5HÀHFWLYH Type 3.5 0.138 2,000 78.740 (25.8) (1.016) 20 17 0.787 0.669 6 0.236 M4 × 0.7 0.028 B 24 0.945 12 0.472 Set screw tightening range ø2.2 ø0.087 Head [Brass (Nickel plated)] (ø4.0) (ø0.157) Model No. tube (PVC) Spring washer [Stainless steel (SUS)] Opposing faces 7 0.276, ø1 ø0.039 fiber core × 1 (Acrylic) thickness 3.2 0.126 Holder Outer sheath ø2.2 ø0.087 (Polyethylene) (Polypropylene) [Brass (Nickel plated)] Prism (BK7) Model No. A B FT-H20-VJ50-S 500 +25 19.685 +0.984 0 0 +1.969 800 +50 31.496 0 0 485 +30 19.095 +1.181 0 0 +55 785 0 30.906 +2.165 0 FT-H20-VJ80-S 150 5.906 16.7 0.657 ø5 ø0.197 Fixing bracket [Brass (nickel plated)] Screw tightening face M2.6 × 0.45 0.018 M4 × 0.7 0.028 3 0.118 18.3 0.720 3.5 0.138 Screw tightening face Fixing plug (PA) Opposing faces 7 0.276, thickness 2.4 0.094 Toothed lock washer ø8.5 ø0.335 ø4 ø0.157 1,000 39.370 11 0.433 ø1.6 ø0.063 150 5.906 19.5 0.768 10 0.394 ø2.2 ø0.087 ø4.33 ø0.170 (PA) Protective tube (PTFE) Opposing faces 7 0.276, thickness 2.4 0.094 Toothed lock washer ø8.5 ø0.335 ø3.6 ø0.142 Mounting cap nut opposing faces 8 0.315 [Stainless steel (SUS)] Joint [Stainless steel (SUS)] Liner+braid tube [Stainless steel (SUS)] FT-H35-M2S6 2,000 78.740 Heat & cold-resistant Ordinary temperature specifications specifications 17 0.669 ø4 ø0.157 M2.6 × 0.45 0.018 M4 × 0.7 0.028 ø1.2 ø0.047 fiber core bundle × 1 Note: The FT-H30-M1V-S is a set with the FT-H30-M1V, photo-terminal FV-BR1, and atmospheric side ber FT-J8. Refer to p.51 for dimensions of the atmospheric side ber and photo-terminals. 150 5.906 27 1.063 INDEX 17 0.669 2,000 78.740 16.7 0.657 18.3 0.720 ø2.2 ø5 ø0.197 Fixing bracket ø0.087 [Brass (nickel plated)] ø2.9 ø0.114 [Stainless steel (SUS)] Fixing plug (PA) ø4 ø0.157 [Stainless steel (SUS)] Opposing faces 7 0.276, thickness 2.4 0.094 [Stainless steel (SUS)] Toothed lock washer ø8.5 ø0.335 [Stainless steel (SUS)] 18.3 0.720 Free-cut Heat & cold-resistant Ordinary temperature specifications specifications 150 5.906 16.7 0.657 ø2.2 ø2.9 ø0.114 ø0.087 [Stainless steel (SUS)] Fixing plug (PA) ø4 ø0.157 [Stainless steel (SUS)] ø5 ø0.197 Fixing bracket [Brass (Nickel plated)] Opposing faces 7 0.276, thickness 2.4 0.094 [Stainless steel (SUS)] Toothed lock washer ø8.5 ø0.335 [Stainless steel (SUS)] FT-HL80Y 60 2.362 M4 × 0.7 0.028 [Stainless steel (SUS)] 27 1.063 4 0.157 End bracket [Stainless steel (SUS)] Toothed lock washer ø7.6 ø0.299 [Stainless steel (SUS)] ø3 ø0.118 [Stainless steel (SUS)] M4 × 0.7 0.028 3 0.118 30 1.181 Opposing faces 7 0.276, thickness 3.2 0.126 [Stainless steel (SUS)] ø2.1 ø0.083 [Stainless steel (SUS)] Heat & cold-resistant Ordinary temperature specifications specifications ø2.5 ø0.098 M2.6 × 0.45 0.018 ø0.8 ø0.031 fiber core bundle × 1 1,000 39.370 FT-H35-M2 30 1.181 17 0.669 ø1.2 ø0.047 fiber 5 core bundle × 1 0.197 20 0.787 ø2.2 ø0.087 FT-H30-M1V-S $PSOLILHUV (DUOLHUPRGHOV FRPSDULVRQ table 8 0.315 2.2 0.087 1,000 39.370 ø2.9 ø0.114 (Silicone) ø4 ø0.157 [Brass (Nickel plated)] ø1.1 ø0.043 fiber core bundle × 1 M2.6 × 0.45 0.018 M4 × 0.7 0.028 FX-100 VHULHV ø3.5 ø0.138 5.4 0.213 Lock nut (polycarbonate) 2UGLQDU\WHPSHUDWXUHVLGH¿EHU)7)0FRQQHFWLRQGLDJUDPIURQWYLHZ Heat & cold-resistant Ordinary temperature specifications specifications 12 0.472 2WKHUV FX-500 VHULHV 9.3 0.366 FT-H20W-M1 20 0.787 3 0.118 3 0.118 2.5 0.098 ø2.7 ø0.106 Liner + braid tube [stainless steel (SUS304)] Joint bracket [Brass (nickel plated)] Note: Ordinary temperature side ber (FT-FM2) only. FT-H20-M1 Thru-beam Type 5HWURUHÀHFWLYH Type 7.284 +1.181 0 Note: Ordinary temperature side ber (FT-FM2) only. VacuumUHVLVWDQW Liquid Leak / Liquid Detection 7.874 +0.984 0 (100) (3.937) ø3.8 ø0.150 2,000 78.740 Spring washer [Stainless steel (SUS)] Flat Type Retroreflective Type +HDWUHVLVWDQWVLGHXQLWGLDJUDPVLGHYLHZ 24 A 0.945 Heat & cold-resistant Ordinary temperature specifications specifications Opposing faces7 0.276, 5.4 ø3.5 ø0.138 thickness 2.4 0.094 0.213 Lock nut (polycarbonate) Toothed lock washer ø2.7 ø0.106 Liner + braid tube [Stainless steel (SUS304)] ø8.5 ø0.335 Free-cut (Note) FT-H20-VJ80-S 23 0.906 A 12 Joint bracket 0.472 [Brass (nickel plated)] Heat & cold-resistant Ordinary temperature specifications specifications 9.3 ø4 ø0.157 (100) (3.937) 0.366 Threaded Type Narrow Beam FT-H20-VJ50-S (25) (0.984) ø5.5 ø0.217 1,500 59.055 2,000 78.740 500 19.685 (Allowable cutting range) ø2.2 ø0.087 (ø4) (ø0.157) protective tube (Fluorine resin) 37 DIMENSIONS (Unit: mm in) Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the ampli ers. The CAD data in the dimensions can be downloaded from our website. Dimensions are listed in the order of thru-beam type, retrore ective type, and re ective type, and in alphabetic order of the model No. 7KUXEHDPW\SH¿EHUV Free-cut FT-KS40 8 0.315 2,000 78.740 (Set screw tightening range) (30) ø1 ø0.039 (1.181) Beam axis (ø2) (ø0.079) Model No. tube(PVC) ø0.5 ø0.020 fiber core × 1 (PMMA) Sheath ø1 ø0.039 (Polyethylene) ø3.5 ø0.138 ø3.7 ø0.146 Holder(PC) End bracket [Stainless steel(SUS303)] 1.5 1.3 0.059 0.051 (0.5) (0.020) Prism(PC) 2,000 78.740 4-C0.15 C0.006 (30) (1.181) End bracket [Stainless steel (SUS303)] 2 0.079 Fiber Selection Guide &KRRVH by model Mounting reference surface 20 0.787 18 0.709 39 ø1 0.0 ø Beam axis 1.7 0.067 Tough Fiber Free-cut FT-KV26 20 0.787 New product introduction ø1 ø0.039 &KRRVH E\VKDSH application Viewing QHZPRGHOV (ø2)(ø0.079)Model No. tube(PVC) ø0.5 ø0.020 fiber core × 1 (PMMA) Sheath ø1 ø0.039 (Polyethylene) )LEHUV Free-cut FT-KV40, FT-KV40W Free-cut FT-L80Y ø ø0 4 .15 7 2,000 78.740 25 0.984 3.7 0.146 3 0.118 (25) (0.984) ø1 ø0.039 (30) (1.181) ø2.5 ø0.098 Holder (PC) Prism(PC) (ø2)(ø0.079) Model No. tube (PVC) ø0.5 ø0.020 fiber core × 1 (PMMA) Sheath ø1 ø0.039 (Polyethylene) Enclosure (LCP) 1,500 59.055 2,000 78.740 500 19.685 (Allowable cutting range) Prism (PC) 3 0.118 3.3 0.130 ø2.2 ø0.087 (ø4) (ø0.157) protective tube (Fluorine resin) ø5.5 ø0.217 Small Spot C1 C0.039 2-R 2.5 R0. 098 Mounting bracket [Stainless steel(SUS304)] 4.1 0.161 Narrow Beam Wide Beam Convergent Reflective Type ø1 ø0.039 Retroreflective Type (ø2)(ø0.079) Model No. tube(PVC) ø0.5 ø0.020 fiber core × 1 (PMMA) Sheath ø1 ø0.039 (Polyethylene) R 6.5 0.256 4.7 0.185 ø2.5 ø0.098 6.5 0.256 Holder (PC) Cylindrical Type Sleeve 2,000 78.740 3.2 0.126 3.2 0.126 (30) 3.3 (1.181) 0.130 Threaded Type Flat Type Assembly dimensions with MS-FD-3 (attached mounting bracket) 25 0.984 10 0.394 Super Quality ChemicalUHVLVWDQW Enclosure (LCP) 5 0.197 5 0.197 HeatUHVLVWDQW VacuumUHVLVWDQW Free-cut FT-R40 Free-cut FT-R41W Liquid Leak / Liquid Detection 2,000 78.740 ø1.2 ø0.047 Stainless pipe [Stainless steel(SUS304)] 2.4 0.094 25 0.984 20 0.787 ø2.7 ø0.106 (30) (1.181) 97 .1 9 R0 .03 R5 1 ±0 ± 90 °± 12 0.472 5° 5 0.197 1 0.039 3 0.118 ø2.2 ø0.087 7 0.276 ø1 ø0.039 fiber core × 1 (PMMA) Sheath ø2.2 ø0.087 (Polyethylene) (ø3.2) (ø0.126) Model No. tube (PVC) Fixing bracket [Stainless steel(SUS303)] Toothed lock washer M4 [Stainless steel(SUS304)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] End bracket [Stainless steel(SUS303)] ø2 ø0.079 -0.004 ø4 ø0.157 -0.1 -0.13 -0.005 Mounting reference surface (Screw periphery) 9 0.354 Enclosure [Zinc die-cast (ZDC2)] 4.4 0.173 1 0.039 9.5 0.374 8 0.315 2.4 0.094 M4 × 0.7 0.028 7 0.276 ø8.5 ø0.335 3.2 0.126 2,000 78.740 6 0.236 (30) (1.181) Fiber 2SWLRQV (ø3.2) (ø0.126) Model No. tube (PVC) Toothed lock washer M4[Stainless steel(SUS304)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] ø2.2 ø0.087 Fiber 'LPHQVLRQV ø1 ø0.039 fiber core × 1 (PMMA) Sheath ø2.2 ø0.087 (Polyethylene) M4 × 0.7 0.028 M2.6 × 0.45 0.018 ø8.5 ø0.335 Thru-beam Type 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type 2WKHUV 7 0.276 3.2 0.126 $PSOLILHUV Free-cut FT-R42W FT-S11 7 0.276 8 0.315 2.4 0.094 M4 × 0.7 0.028 Enclosure [Zinc die-cast (ZDC2)] 6 0.236 4.4 0.173 1 0.039 10 0.394 0.5 0.020 Lens (PMMA) ø8.5 ø0.335 3.2 0.126 9 0.354 3 Set screw tightening range 0.118 2,000 78.740 (30) (1.181) (ø3.2) (ø0.126) Model No. tube (PVC) Toothed lock washer M4 [Stainless steel(SUS304)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] 7 0.276 ø2.2 ø0.087 ø1 ø0.039 fiber core × 1 (PMMA) Sheath ø2.2 ø0.087 (Polyethylene) 6 0.236 ø1 ø0.039 End bracket [Stainless steel(SUS303)] ø0.25 ø0.010 fiber core × 1 (PMMA) Sheath ø0.7 ø0.028 (Polyethylene) FX-500 VHULHV FX-100 VHULHV 500 19.685 19.5 0.768 (30) (1.181) 10 0.394 ø2.2 ø0.087 (ø4.33) (ø0.170) Resin plug (PA) (ø1.5) (ø0.059) Model No. tube (PVC) INDEX (DUOLHUPRGHOV FRPSDULVRQ table 38 New product introduction Tough Fiber DIMENSIONS (Unit: mm in) Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the ampli ers. The CAD data in the dimensions can be downloaded from our website. Dimensions are listed in the order of thru-beam type, retrore ective type, and re ective type, and in alphabetic order of the model No. 7KUXEHDPW\SH¿EHUV FT-S20 &KRRVH by model &KRRVH E\VKDSH application Super Quality 2,000 78.740 Resin plug (ABS) (20) (0.787) 8 0.315 2 0.079 Set screw 3 tightening range 0.118 ø1 ø0.039 ø1 ø0.039 10.2 0.402 (0.3) (0.012) 2 0.079 8 0.315 2,000 78.740 3 0.118 (Set screw tightening range) ø1 ø0.039 (30) (1.181) ø1.5 ø0.591 -0.07 -0.003 -0.1 -0.004 Mounting reference surface (Periphery) (ø2) (ø0.079) Model No. tube (PVC) ø0.5 ø0.020 Fiber core × 1 (Acrylic) Sheath ø1.0 ø0.039 (Polyethylene) End bracket [Stainless steel(SUS303)] Free-cut FT-S21W FT-S30 Cylindrical Type 8 0.315 2 0.079 Flat Type 2,000 78.740 (Set screw tightening range) 3 0.118 Sleeve Narrow Beam (19.7) (0.776) ø1 (ø4.33)(ø0.170) ø2.2 ø1.8 ø0.039 ø0.087 ø0.071 (ø2) (ø0.079) Model No. tube (PVC) ø1.5 ø0.591 Mounting reference surface (Periphery) End bracket [Stainless steel(SUS303)] Threaded Type Small Spot Viewing QHZPRGHOV )LEHUV Free-cut FT-S21 Fiber Selection Guide (30) (1.181) ø1 ø0.039 2 0.079 ø1 ø0.039 Mounting reference surface (Screw periphery) 2,000 78.740 Resin plug (ABS) (20) (0.787) 8 0.315 ø2 ø0.079 (ø2) (ø0.079) Model No. tube (PVC) ø0.5 ø0.020 fiber core × 1 (PMMA) Sheath ø1 ø0.039 (Polyethylene) End bracket [Stainless steel(SUS303)] -0.003 ø1.5 ø0.059 -0.07 -0.1 -0.004 Set screw 5 tightening range 0.197 (19.7) (0.776) 10.2 0.402 (0.3) (0.012) (ø4.33)(ø0.170) ø2.2 ø1.8 ø2.2 ø0.087 ø0.087 ø0.071 (ø3.2) (ø0.126) Model No. tube (PVC) ø3 ø0.118 Mounting reference surface (Periphery) End bracket [Stainless steel(SUS303)] Wide Beam Convergent Reflective Type Free-cut FT-S31W HeatUHVLVWDQW Liquid Leak / Liquid Detection 8 2,000 78.740 0.315 (Set screw tightening range) 5 ø2.2 ø0.087 0.197 (30)(1.181) 2 0.079 ChemicalUHVLVWDQW VacuumUHVLVWDQW Free-cut FT-S32 Retroreflective Type Screw tightening range (excluding crimping part) ø1 ø0.039 fiber core × 1 (PMMA) Sheath ø2.2 ø0.087 (Polyethylene) Mounting reference surface (Periphery) ø2 ø0.079 2 0.079 ø2 ø0.079 (ø3.2) (ø0.126) Model No. tube(PVC) -0.003 ø3 ø0.118 -0.07 -0.1 -0.004 8 0.315 End bracket [Stainless steel(SUS303)] 2,000 78.740 ø2.2 ø0.087 (30) (1.181) Lens (PMMA) ø2.5 ø0.098 End bracket [Stainless steel(SUS303)] Crimping part (ø3.2)(ø0.126) Model No. tube (PVC) ø1 ø0.039 fiber core × 1 (PMMA) Sheath ø2.2 ø0.087 (Polyethylene) Fiber 2SWLRQV Free-cut FT-V23 Fiber 'LPHQVLRQV 5HWURUHÀHFWLYH Type 1.8 0.071 View A 1.1 0.043 ø ø0 0.8 .0 31 Thru-beam Type 5HÀHFWLYH Type 2WKHUV $PSOLILHUV FX-500 VHULHV FX-100 VHULHV 10 0.394 Set screw tightening range View A 1 0.039 2 0.02 55 ø ø0. Beam axis 15 0.591 20 0.787 ø1 ø0.039 A ø2 ø0.079 Sleeve [Stainless steel(SUS304)] End bracket [Stainless steel(SUS303)] 2,000 78.740 (30) ø1.3 ø0.051 (1.181) (ø2.5) (ø0.098) Model No. tube (PVC) ø0.75 ø0.030 fiber core × 1 (PMMA) Sheath ø1.3 ø0.051 (Polyethylene) Free-cut FT-V25 View A 1.8 0.071 ø ø0 0.5 .0 5 22 10 0.394 Set screw tightening range Set screw tightening range Beam axis 15 0.591 ø1 A ø0.039 15 0.591 ø2 ø0.079 2,000 78.740 (30) (1.181) ø1 ø0.039 (ø2) (ø0.079) Model No. tube (PVC) Sleeve[Stainless steel(SUS304)] End bracket [Stainless steel(SUS303)] ø0.5 ø0.020 fiber core × 1 (PMMA) Sheath ø1 ø0.039 (Polyethylene) Free-cut FT-V30 1.3 0.051 15 0.591 15 0.591 ø2 ø0.079 A 2.3 0.091 View A .1 ø1 Beam axis 3 .04 ø0 ø1 ø0.039 End bracket [Stainless steel(SUS303)] (ø2) (ø0.079) Model No. tube (PVC) ø0.5 ø0.020 fiber core × 1 (PMMA) Sheath ø1 ø0.039 (Polyethylene) 10 Set screw tightening range 0.394 Beam axis 2,000 78.740 (30) ø1 ø0.039 (1.181) A Sleeve [Stainless steel(SUS304)] (DUOLHUPRGHOV FRPSDULVRQ table 10 0.394 1.8 0.071 1 0.039 INDEX Free-cut FT-V24W 20 0.787 ø1.5 ø0.059 ø2.5 Sleeve [Stainless steel(SUS304)] ø0.098 End bracket [Stainless steel(SUS303)] 15 0.591 2,000 78.740 (30) (1.181) ø2.2 ø0.087 (ø3.2) (ø0.126) Model No. tube(PVC) ø1 ø0.039 fiber core × 1 (PMMA) Sheath ø2.2 ø0.087 (Polyethylene) 39 DIMENSIONS (Unit: mm in) Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the ampli ers. The CAD data in the dimensions can be downloaded from our website. Dimensions are listed in the order of thru-beam type, retrore ective type, and re ective type, and in alphabetic order of the model No. 7KUXEHDPW\SH¿EHUV Free-cut FT-V40 7 ø ø0 4 .1 5 3.7 0.146 3 0.118 (8) (0.315) Prism (PC) 12 0.472 2,000 78.740 (Set screw tightening range) (30) (1.181) ø2.5 ø0.098 (25) (0.984) 4.5 0.177 Beam axis mark Fiber Selection Guide &KRRVH by model 500 19.685 (Allowable cutting range) &KRRVH E\VKDSH application Viewing QHZPRGHOV ø2.2 ø0.087 (ø4) (ø0.157) protective tube (Fluorine resin) ø5.5 ø0.217 Sensing part (ø3.2) (ø0.126) Model No. tube (PVC) ø0.75 ø0.030 fiber core × 1 (PMMA) Sheath ø2.2 ø0.087 (Polyethylene) End bracket [Stainless steel(SUS303)] Window name plate (Polyester) Holder (PC) 2,000 78.740 1,500 59.055 ø2.2 ø0.087 Tough Fiber Free-cut FT-V80Y 25 0.984 New product introduction )LEHUV Super Quality Free-cut FT-WZ4 Free-cut FT-WZ7 3.5 2 0.079 0.138 1.2 0.047 0.5 0.020 7 0.276 3.5 0.138 7 0.276 3.5 0.138 1.2 0.047 2,000 78.740 ø3.2 ø0.126 hole, ø5.6 ø0.220 spot facing, 2.2 0.087 deep Inner pipe [Stainless Steel (SUS)] (20 0.787) ø1 ø0.039 Prism (Acrylic) 7 0.276 14 3.5 0.551 0.138 A ø1.3 ø0.051 (ø2 ø0.079) Model No. tube (PVC) Beam axis View A ø5 ø0.020 A Multi-core fiber (Fiber core: Acrylic, Sheath: Polyethylene) 1.05 0.041 ø2.4 Enclosure ø0.094 (Polycarbonate) ø1 View A ø0.039 Multi-core fiber ø0.0375 ø0.001 × 151 Prism (Acrylic) Beam axis (ø2) (ø0.079) Model No. tube (PVC) Multi-core fiber (Fiber core: Acrylic, Sheath: Polyethylene) Free-cut 0.5 0.020 2 0.079 1.05 0.041 10 1,000 39.370 0.394 3.5 0.138 4-R1 R0.039 Free-cut FT-Z30 ø1.5 ø0.059 Beam axis ø0.75 ø0.030 fiber core × 1 (PMMA) Sheath ø1.3 ø0.051 (Polyethylene) Enclosure (PC) 10 0.394 2.5 (ø2.0) (ø0.079) Model No. tube (PVC) 0.098 Inner pipe [Stainless steel(SUS304)] 1 ø0.5 ø0.020 fiber core × 1 (PMMA) 7 0.039 2.1 Sheath ø1 ø0.039 (Polyethylene) 0.083 0.276 5 0.197 Enclosure(PC) ø1 (30) (1.181) ø0.039 Beam axis 0.5 3 0.118 0.020 1.75 0.069 8.5 3.9 0.154 0.335 (ø2.5) (ø0.098) Model No. tube (PVC) 11 0.433 0.5 0.020 7.5 2-ø2.2 ø0.087 Hole 0.295 (30) (1.181) 5.5 0.217 2.2 0.087 12 Reflector (PC) 0.472 0.6 0.024 ø1.3 ø0.051 12 0.472 3.4 11 0.433 0.134 3 0.118 8 0.315 3.5 0.138 Beam axis 2 0.079 Reflector (PMMA) 1.75 0.069 Lens (PMMA) 2,000 78.740 (30) (1.181) ø1.3 ø0.051 Reflector (PC) 2.2 0.087 8.5 0.335 (ø2.5) (ø0.098) 5.5 0.217 7.5 0.295 12 0.472 5.5 0.217 2,000 78.740 ø1.3 2-ø2.2 ø0.087 Hole ø0.051 (30) (1.181) (ø2.5) (ø0.098) Model No. tube (PVC) 3.9 0.154 (ø2.5) (ø0.098) Model No. tube (PVC) Enclosure (PC) Retroreflective Type ChemicalUHVLVWDQW HeatUHVLVWDQW VacuumUHVLVWDQW Liquid Leak / Liquid Detection Thru-beam Type (ø2.5) (ø0.098) 4.3 ø0.75 ø0.030 fiber core × 1 (PMMA) 0.169 1.75 7.5 Sheath ø1.3 ø0.051 (Polyethylene) 3 0.069 0.295 0.118 0.5 0.5 0.020 0.020 11 0.433 Beam axis Enclosure (PC) ø0.75 ø0.030 fiber core × 1 (PMMA) Sheath ø1.3 ø0.051 (Polyethylene) 2-ø2.2 ø0.087 Hole Narrow Beam Fiber 'LPHQVLRQV Small Spot Fiber 2SWLRQV (ø2.5) (ø0.098) 4.3 0.169 2,000 78.740 Center of beam axis Free-cut FT-Z30E Flat Type Convergent Reflective Type ø2.2 ø0.087 Hole, ø3.6 ø0.142 spot facing deep 1.4 0.055 Cylindrical Type Wide Beam 1.05 0.041 Multi-core fiber ø0.075 ø0.003 × 151 FT-Z20HBW Threaded Type Sleeve (20 0.787) 10 0.394 ø1.5 Enclosure ø0.059 (Polycarbonate) 1 0.039 1,000 39.370 ø2.2 ø0.087 hole, ø3.6 ø0.142 spot facing, 1.4 0.055 deep Inner pipe [Stainless steel (SUS)] 2.5 0.098 5 0.197 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type 2WKHUV $PSOLILHUV FX-500 VHULHV Free-cut FT-Z30EW Free-cut FT-Z30H 3 0.118 12 2-ø2.2 ø0.087 0.472 3.4 11 Hole 0.433 0.134 8 0.315 3.5 0.138 2 0.079 Reflector (PMMA) 1.75 0.069 Lens (PMMA) 2,000 78.740 (30) (1.181) ø1.3 ø0.051 (ø2.5) (ø0.098) ø1 ø0.039 fiber core × 1 (PMMA) Sheath ø1.3 ø0.051 (Polyethylene) Beam axis 5.5 0.217 7.5 0.295 (ø2.5) (ø0.098) Model No. tube (PVC) Enclosure (PC) 3 0.118 8 0.315 Lens (PMMA) Beam axis 12 0.472 3.4 11 0.433 0.134 3.5 0.138 5.5 2 0.079 0.217 7.5 1.75 0.295 0.069 Enclosure (PC) 2,000 78.740 (30) (1.181) ø1.3 ø0.051 (ø2.5) (ø0.098) FX-100 VHULHV INDEX ø0.75 ø0.030 fiber core × 1 (PMMA) Sheath ø1.3 ø0.051 (Polyethylene) 2-ø2.2 ø0.087 Hole (ø2.5) (ø0.098) Model No. tube (PVC) (DUOLHUPRGHOV FRPSDULVRQ table 40 New product introduction Tough Fiber DIMENSIONS (Unit: mm in) Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the ampli ers. The CAD data in the dimensions can be downloaded from our website. Dimensions are listed in the order of thru-beam type, retrore ective type, and re ective type, and in alphabetic order of the model No. 7KUXEHDPW\SH¿EHUV Free-cut FT-Z30HW &KRRVH by model &KRRVH E\VKDSH application Viewing QHZPRGHOV 12 0.472 2,000 78.740 (30) 3.4 (1.181) 11 0.433 0.134 (ø2.5)(ø0.098) ø1.3 ø0.051 3 0.118 8 0.315 Beam 3.5 0.138 axis 2-ø2.2 ø0.087 Hole 7.5 0.295 1.75 0.069 Enclosure (PC) )LEHUV (ø2.5) (ø0.098) Model No. tube (PVC) Super Quality Cylindrical Type Sleeve Flat Type Small Spot Narrow Beam Free-cut FT-Z40HBW ø3.2 ø0.126 Hole, ø5.6 ø0.220 11 2,000 78.740 spot facing deep 2.2 0.087 0.433 3.5 0.138 4-R1 R0.039 1 0.039 3.5 0.138 Enclosure (PC) 1.05 0.041 (30) ø1.3 ø0.051 3.5 0.138 (1.181) 7 14 0.276 0.551 (ø2.5) (ø0.098) Model No. tube (PVC) 1.6 Inner pipe [Stainless steel(SUS304)] 0.063 7 2.7 0.106 ø2.4 ø0.094 0.276 Beam axis Wide Beam ø1 ø0.039 × 1 fiber core (PMMA) 0.6 Sheath ø1.3 ø0.051 (Polyethylene) 0.024 Convergent Reflective Type Retroreflective Type Free-cut FT-Z802Y ChemicalUHVLVWDQW HeatUHVLVWDQW VacuumUHVLVWDQW Liquid Leak / Liquid Detection 4 0.157 3 0.118 2-ø3.2 ø0.126 (7.3) (0.287) 13 0.512 (1) (0.039) Fiber 2SWLRQV Fiber 'LPHQVLRQV Thru-beam Type 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type 2WKHUV $PSOLILHUV FX-500 VHULHV FX-100 VHULHV INDEX (DUOLHUPRGHOV FRPSDULVRQ table 2,000 78.740 (5.8) (0.228) 15 0.591 7.5 0.295 6 0.236 7 0.276 Beam axis ø1 ø0.039 fiber core × 1 (PMMA) Sheath ø1.3 ø0.051 (Polyethylene) 2 0.079 5.5 0.217 Lens (PMMA) Threaded Type Free-cut FT-Z30W Fiber Selection Guide ø2.2 ø0.087 3 0.118 Enclosure (PC) Beam axis 11 0.433 0.5 0.020 7.5 1.75 0.069 0.295 8.5 0.335 3.9 0.154 ø1 ø0.039 fiber core × 1 (PMMA) Sheath ø1.3 ø0.051 (Polyethylene) (ø2.5) (ø0.098) Model No. tube (PVC) 0.5 0.020 (30) (1.181) 4.3 0.169 (ø2.5) (ø0.098) ø1.3 ø0.051 2-ø2.2 ø0.087 Hole Reflector(PC) 2.2 0.087 Center of beam axis Reflector(PC) 8.5 0.335 3 0.118 2.2 0.087 5.5 0.217 12 0.472 12 0.472 5.5 0.217 2,000 78.740 2,000 78.740 2-ø2.2 ø0.087 Hole (30) (1.181) 3.9 0.154 4.3 0.169 (ø2.5) (ø0.098) ø1 ø0.039 fiber core × 1 (PMMA) Sheath ø1.3 ø0.051 (Polyethylene) 0.5 0.020 7.5 0.295 11 0.433 Enclosure (PC) Beam axis 1.75 0.069 0.5 0.020 ø1.3 ø0.051 (ø2.5) (ø0.098) Model No. tube (PVC) 41 DIMENSIONS (Unit: mm in) Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the ampli ers. The CAD data in the dimensions can be downloaded from our website. Dimensions are listed in the order of thru-beam type, retrore ective type, and re ective type, and in alphabetic order of the model No. 5HWURUHÀHFWLYHW\SH¿EHUV Free-cut FR-KZ22E 5HÀHFWRU 15.8 0.622 14.7 0.579 0.7 0.028 1.45 0.057 Fiber 5.2 0.205 2-M1.4 × 0.3 0.012 Mounting bracket [Stainless steel(SUS303)] 11 9 7.5 0.433 0.354 0.295 Prism (PC) Base (ABS) 2,000 78.740 (30) 2-ø1 ø0.039 (1.181) (3.7) (0.146) (ø2) (ø0.079) Model No. tube (PVC) Enclosure (ABS) Reflector (PMMA) 11.2 0.441 2.2 0.087 25 0.984 3 0.118 3.7 0.146 9.5 0.374 2,000 78.740 21.5 0.846 7.5 .039 0.295 ) ø0 1.5 (2-ø1 0.059 2 0.079 2 0.079 (30) (1.181) 2-ø1 ø0.039 Beam-receiving side (Black) Beam-emitting 2 0.079 4 side (Gray) 0.157 (ø2) (ø0.079) Model No. tube (PVC) ø0.5 ø0.020 fiber core × 1 (PMMA) Sheath ø1 ø0.039 (Polyethylene) Head block [Stainless steel(SUS303)] 2-M1.4 × 0.3 0.012 4 0.157 1.9 0.075 0.7 0.028 Prism (PC) 1.5 0.059 2 0.079 5 0.197 9 4 0.157 0.354 $VVHPEO\GLPHQVLRQVZLWK06)'DWWDFKHGPRXQWLQJEUDFNHW 12.2 3.7 0.146 0.480 5 0.197 10.2 0.402 4 0.157 21 0.827 5.2 0.205 2,000 78.740 (30) 2-ø1 ø0.039 (1.181) (3.7) (0.146) Beam axis 9.5 0.374 12.2 3.7 0.146 0.480 5 0.197 10.2 0.402 ø0.5 ø0.020 fiber core × 1 (PMMA) Sheath ø1 ø0.039 (Polyethylene) (Accessory for FR-KZ50E) 10.1 0.398 3.3 0.130 6 0.236 Beam axis 5HÀHFWRU RF-003 5 0.197 1.1 0.043 Retroreflective Type 10 0.394 (Effective reflector width) 4 0.157 14 0.551 7 0.276 2-M3 × 0.5 0.020 MS-FD-2 Mounting bracket [Stainless steel(SUS304)] HeatUHVLVWDQW 19 28 1.102 0.748 10 0.394 (Effective reflector width) (2-R) Reflector (Norbornene resin) 1 0.039 Cover[Stainless steel (SUS304)] 3.2 0.126 VacuumUHVLVWDQW Liquid Leak / Liquid Detection 4.3 0.169 Fiber 2SWLRQV Free-cut FR-Z50HW Fiber Lens (BK7) 5.2 0.205 Enclosure(ABS) ø0.5 ø0.020 fiber core × 1 (PMMA) Sheath ø1 ø0.039 (Polyethylene) 5 0.197 1.1 0.043 Beam axis 10 0.394 (Effective reflector width) (2-R) 3.2 0.126 1 0.039 4.3 0.169 Reflector (Norbornene resin) 5HWURUHÀHFWLYH Type 2-ø2.2 ø0.087 Lens (BK7) 9.5 0.374 12.2 0.480 5 0.197 10.2 0.402 4 0.157 ø1 ø0.039 fiber core × 1 (PMMA) Sheath ø2.2 ø0.087 (Polyethylene) 1 0.039 2,000 78.740 15 0.591 2-M3 × 0.5 0.020 6 0.236 Beam axis 14 0.551 7 0.276 FX-100 VHULHV MS-FD-2 Mounting bracket [Stainless steel(SUS304)] 4 0.157 2-ø2.2 ø0.087 Enclosure(PC) 5.2 0.205 5HÀHFWLYHWDSHRF-13 $PSOLILHUV FX-500 VHULHV 3.3 0.130 3.3 0.130 1.2 0.047 5HÀHFWLYH Type 2WKHUV 5.2 0.205 $VVHPEO\GLPHQVLRQVZLWK06)'DWWDFKHGPRXQWLQJEUDFNHW 4.6 0.181 Fiber 'LPHQVLRQV Thru-beam Type 2,000 78.740 Enclosure(PC) 10.6 0.417 10 0.394 (Effective reflector width) 1 0.039 15 0.591 4.6 0.181 9.5 0.374 (Accessory for FR-KZ50H) 28 19 1.102 0.748 ChemicalUHVLVWDQW 3.3 0.130 10.1 0.398 Cover[Stainless steel (SUS304)] 10.6 0.417 Wide Beam Convergent Reflective Type Enclosure(ABS) 5HÀHFWRU RF-003 (ø2) (ø0.079) Model No. tube (PVC) 4 0.157 1.2 0.047 Small Spot Narrow Beam $VVHPEO\GLPHQVLRQVZLWK06)'DWWDFKHGPRXQWLQJEUDFNHW (3.7) (0.146) Threaded Type Flat Type 2-M3 × 0.5 0.020 MS-FD-2 Mounting bracket [Stainless steel(SUS304)] 4 0.157 14 0.551 7 0.276 Prism (PC) ø0.5 ø0.020 fiber core × 1 (PMMA) Sheath ø1 ø0.039 (Polyethylene) 2,000 78.740 (30) 2-ø1 ø0.039 (1.181) 2-ø1 ø0.039 Sleeve Beam axis (2-R) 21 0.827 (30) (1.181) Super Quality 3.3 0.130 (ø2) (ø0.079) Model No. tube (PVC) Enclosure (ABS) (2-R) Viewing QHZPRGHOV (ø2) (ø0.079) Model No. tube (PVC) 3.3 0.130 1.2 0.047 (3.7) (0.146) 5.2 0.205 3.7 0.146 &KRRVH E\VKDSH application Cylindrical Type 9.5 0.374 Free-cut Fiber 2,000 78.740 25 0.984 3 0.118 6 0.236 FR-KZ50H 9.5 0.374 &KRRVH by model )LEHUV Beam axis 2 0.079 Fiber Selection Guide ø0.5 ø0.020 fiber core × 1 (PMMA) Sheath ø1 ø0.039 (Polyethylene) Beam axis Fiber 1 0.039 Tough Fiber Free-cut FR-KZ50E 1.95 0.077 5 0.197 New product introduction INDEX ø1 ø0.039 fiber core × 1 (PMMA) Sheath ø2.2 ø0.087 (Polyethylene) (Accessory for FR-Z50HW) 0.5 0.020 30 1.181 30 1.181 Rear surface (pressure-sensitive adhesive) Reflective surface (Acrylic) (DUOLHUPRGHOV FRPSDULVRQ table 42 Tough Fiber Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the ampli ers. The CAD data in the dimensions can be downloaded from our website. DIMENSIONS (Unit: mm in) New product introduction Dimensions are listed in the order of thru-beam type, retrore ective type, and re ective type, and in alphabetic order of the model No. 5HÀHFWLYHW\SH¿EHUV FD-30 Fiber Selection Guide 2 ø6.5 0.079 ø0.256 2.7 0.106 ø2 ø0.079 &KRRVH by model &KRRVH E\VKDSH application Viewing QHZPRGHOV )LEHUV Super Quality Free-cut FD-31 10 0.394 ø3 ø0.118 Mounting reference surface (Screw periphery) End bracket [Stainless steel(SUS303)] Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS)] 2,000 78.740 Resin plug(ABS) 1.8 0.071 (20) (0.787) ø6.5 ø0.256 (19.7) (0.776) 10.2 0.402 ø1 M3 × 0.5 ø0.039 (ø4.33) 0.020 (ø0.170) Toothed lock washer M3 [Stainless steel(SUS)] ø2.2 ø1.8 ø0.087 ø0.071 (ø2) (ø0.079) Model No. tube (PVC) Free-cut FD-31W Sleeve 2.7 0.106 Flat Type ø6.5 ø0.256 5.5 0.217 2 0.079 10 0.394 1.8 0.071 ø2 End bracket ø0.079 [Stainless steel(SUS303)] (ø2) (ø0.079) Model No. tube (PVC) M3 × 0.5 0.020 Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS304)] Narrow Beam Free-cut 1.2 0.047 17 0.669 12 0.472 2,000 78.740 ø1 ø0.039 Beam-emitting side 30 1.181 1.8 0.071 (ø2) (ø0.079) Model No. tube(PVC) Beam-receiving side ø2.3 ø0.091 Details of M3 × 0.5 sensing part 0.020 2.8 0.110 ø3 ø0.118 Sheath ø1.3 ø0.051 ø1.3 ø0.051 (Polyethylene) End bracket [Stainless steel(SUS303)] Sheath ø1 ø0.039 (Polyethylene) Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS304)] Toothed lock washer M3 [Stainless steel(SUS304)] Beam-receiving ø0.25 ø0.010 fiber core × 9 (PMMA) Beam-emitting ø0.5 ø0.020 fiber core × 1 (PMMA) Convergent Reflective Type Free-cut FD-32GX FD-40 ChemicalUHVLVWDQW 18 0.709 12 0.472 1.2 0.047 ø4.5 ø0.177 ø2.3 ø0.091 HeatUHVLVWDQW Fiber 2SWLRQV M3 × 0.5 0.020 Toothed lock washer M3 [Stainless steel(SUS304)] ø0.5 ø0.020 fiber core × 1 (PMMA) Sheath ø1 ø0.039 (Polyethylene) Toothed lock washer M3 [Stainless steel(SUS304)] Wide Beam Liquid Leak / Liquid Detection ø0.5 ø0.020 Fiber core × 1 (Acrylic) Sheath ø1 ø0.039 (Polyethylene) FD-32G ø6.5 ø0.256 5.5 0.217 2,000 78.740 (30) (1.181) 2-ø1 ø0.039 Small Spot VacuumUHVLVWDQW (ø2) (ø0.079) Model No. tube (PVC) ø3 ø0.118 -0.1 -0.004 -0.13 -0.005 Mounting reference surface (Screw periphery) End bracket [Stainless steel(SUS303)] Cylindrical Type ø1 ø0.039 (30) (1.181) 1.8 0.071 ø2 ø0.079 Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS304)] Threaded Type Retroreflective Type 2,000 78.740 10 0.394 2.7 0.106 (0.3) (0.012) 2 0.079 ø6.5 ø0.256 5.5 0.217 (2.5) (0.098) ø3.8 ø0.150 1,000 39.370 300 11.811 6 0.236 (2.5) (0.098) (30) (1.181) Crimping part Crimping part 12 0.472 ø8.5 0.079 ø0.335 3.5 0.138 ø2.5 ø0.098 (19.7) (0.776) 10.2 0.402 (0.3) (0.012) Beam-receiving side Sheath ø1 ø0.039 (Polyethylene) Sheath ø1.3 ø0.051 (Polyethylene) Intermediate fixing bracket [Stainless steel(SUS303)] (ø5.1) (ø0.201) Model No. tube(PVC) Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS304)] 2 700 27.559 (Allowable cutting range) ø4.5 ø1 Beam-emitting ø0.177 ø0.039 side ø1.3 ø0.051 M3 × 0.5 0.020 End bracket [Stainless steel (SUS303)] Toothed lock washer M3[Stainless steel (SUS304)] 2,000 78.740 Resin plug(ABS) 2.4 (20) 0.094 (0.787) ø4 ø0.157 Mounting reference surface (Screw periphery) End bracket [Brass(Nickel plated)] Opposing faces 7 0.276 thickness 2.4 0.094 [Brass(Nickel plated)] M4 × 0.7 0.028 ø2.2 ø1.8 ø1 ø0.087 ø0.071 ø0.039 (ø4.33) (ø0.170) (ø2) (ø0.079) Model No. tube (PVC) Toothed lock washer M4 [Brass(Nickel plated)] Protective tube (Polyolefin tube included SUS304 spiral tube) Details of sensing part Fiber 'LPHQVLRQV Beam-receiving ø0.25 ø0.010 fiber core × 9 (PMMA) Beam-emitting ø0.5 ø0.020 fiber core × 1 (PMMA) Thru-beam Type 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type Free-cut FD-41 2 0.079 2WKHUV ø8.5 ø0.335 3.5 0.138 $PSOLILHUV FX-500 VHULHV FX-100 VHULHV INDEX (DUOLHUPRGHOV FRPSDULVRQ table Free-cut FD-41S 2,000 78.740 12 0.472 2.4 0.094 ø2.5 ø0.098 (30) (1.181) ø1 ø0.039 (ø2) (ø0.079) Model No. tube (PVC) -0.1 -0.004 ø4 ø0.157-0.13 -0.005 ø0.5 ø0.020 Fiber core × 1 (Acrylic) Sheath ø1 ø0.039 (Polyethylene) Mounting reference surface (Screw periphery) End backet [Stainless steel(SUS303)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] Toothed lock washer M4 [Stainless steel(SUS304)] M4 × 0.7 0.028 Free-cut FD-41SW ø8.5 ø0.335 7 0.276 3.5 10 0.138 0.394 40 1.575 12 0.472 5 Allowable 10 0.197 bending 0.394 range ø2.5 ø0.098 M4 × 0.7 0.028 Toothed lock washer M4 [Stainless steel(SUS304)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] End bracket [Stainless steel(SUS303)] ø1.48 ø0.058 Sleeve [Stainless steel(SUS304)] 2,000 78.740 2-ø1 (30) ø0.039 2.4 0.094 (1.181) (ø2) (ø0.079) Model No. tube(PVC) ø0.5 ø0.020 fiber core × 1 (PMMA) Sheath ø1 ø0.039 (Polyethylene) Free-cut FD-41W 3.5 0.138 ø8.5 ø0.335 7 0.276 40 1.575 10 0.394 Allowable bending range 10 0.394 5 0.197 12 0.472 ø1.48 ø2.5 ø0.098 ø0.058 Sleeve [Stainless steel M4 × 0.7 0.028 (SUS304)] Toothed lock washer M4 [Stainless steel(SUS304)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] End bracket [Stainless steel(SUS303)] 2.4 0.094 2,000 78.740 2-ø1 (30) ø0.039 (1.181) (ø2) (ø0.079) Model No. tube(PVC) ø0.5 ø0.020 fiber core × 1 (PMMA) Sheath ø1 ø0.039 (Polyethylene) ø8.5 ø0.335 2 0.079 7 0.276 3.5 0.138 12 0.472 2.4 0.094 2,000 78.740 (30) (1.181) 2-ø1.3 ø0.051 ø3 ø0.118 End bracket [Stainless steel(SUS303)] Toothed lock washer M4 [Stainless steel(SUS304)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] M4 × 0.7 0.028 (ø2.5) (ø0.098) Model No. tube(PVC) ø1 ø0.039 fiber core × 1 (PMMA) Sheath ø1.3 ø0.051 (Polyethylene) 43 DIMENSIONS (Unit: mm in) Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the ampli ers. The CAD data in the dimensions can be downloaded from our website. Dimensions are listed in the order of thru-beam type, retrore ective type, and re ective type, and in alphabetic order of the model No. 5HÀHFWLYHW\SH¿EHUV Free-cut FD-42G 25 0.984 5 12 0.472 0.197 1.2 0.047 2,000 78.740 (30) (1.181) 2.4 0.094 ø1 ø0.039 ø1.3 ø0.051 ø2.3 ø0.091 Beam-receiving side (ø2) (ø0.079 ) Model No. tube (PVC) ø4 ø0.157 M3 × 0.5 0.020 M4 × 0.7 0.028 Beam-emitting side Sheath ø1 ø0.039 (Polyethylene) Toothed lock washer M4 [Stainless steel(SUS304)] ø8.5 ø0.335 7 0.276 1.2 0.047 25 0.984 5 0.197 12 0.472 2.4 0.094 M3 × 0.5 0.020 M4 × 0.7 0.028 Sheath ø1.3 ø0.051 (Polyethylene) (30) (1.181) 3.5 0.138 &KRRVH E\VKDSH application Viewing QHZPRGHOV )LEHUV Super Quality Threaded Type Details of sensing part Details of sensing part Fiber Selection Guide &KRRVH by model ø1 ø0.039 Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] Toothed lock washer M4 [Stainless steel(SUS304)] End bracket [Stainless steel(SUS303)] 3.5 0.138 2,000 78.740 Beam-emitting side ø1.3 ø0.051 Beam-receiving side ø4 (ø2) (ø0.079) Model No. tube (PVC) ø0.157 Sheath ø1 ø0.039 (Polyethylene) Sheath ø1.3 ø0.051 (Polyethylene) End bracket [Stainless steel(SUS303)] ø2.3 ø0.091 Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] Tough Fiber Free-cut FD-42GW ø8.5 ø0.335 7 0.276 New product introduction Cylindrical Type Beam-receiving ø0.25 ø0.010 fiber core × 9 (PMMA) Beam-receiving ø0.25 ø0.010 fiber core × 9 (PMMA) Beam-emitting ø0.5 ø0.020 fiber core × 1 (PMMA) Beam-emitting ø0.5 ø0.020 fiber core × 1 (PMMA) Sleeve Flat Type Small Spot FD-60 Free-cut FD-61 ø11 ø0.433 15 0.591 2 0.079 5.5 0.217 2 0.079 ø4.5 ø0.177 ø6 ø0.236 Mounting reference surface (Screw periphery) End bracket [Brass(Nickel plated)] Opposing faces 10 0.394 thickness 2 0.079 [Brass(Nickel plated)] 2 0.079 ø11 ø0.433 2,000 78.740 Resin plug(ABS) (20) (0.787) (19.7) (0.776) 10.2 0.402 (0.3) (0.012) ø4.5 ø0.177 15 0.591 2 0.079 2,000 78.740 (30) (1.181) Free-cut -0.1 -0.004 ø6 ø0.236-0.13 -0.005 Mounting reference surface (Screw periphery) End bracket [Stainless steel(SUS303)] Opposing faces 10 0.394 thickness 2 0.079 [Stainless steel(SUS304)] Toothed lock washer M6 [Stainless steel(SUS304)] (ø3.2) (ø0.126) Model No. tube (PVC) ø1 ø0.039 Fiber core × 1 (Acrylic) Sheath ø2.2 ø0.087 (Polyethylene) M6 × 0.75 0.030 2 0.079 ø4.5 ø0.177 15 0.591 2 0.079 (30) (1.181) 2,000 78.740 Free-cut FD-61S 2-ø2.2 ø0.087 Hexagon nut M6 [Stainless steel(SUS304)] Sheath ø2.2 ø0.087 (Polyethylene) Toothed lock washer M6 [Stainless steel(SUS304)] End bracket [Stainless steel(SUS303)] M6 × 0.75 0.030 5.5 0.217 15 0.591 40 1.575 ø11 ø0.433 10 0.394 (ø3.2) (ø0.126) Model No. tube (PVC) Details of sensing part Convergent Reflective Type Retroreflective Type 5.5 10 0.217 0.394 Allowable 5 0.197 bending 10 0.394 range ø2.5 ø0.098 Sleeve [Stainless steel(SUS304)] HeatUHVLVWDQW VacuumUHVLVWDQW Liquid Leak / Liquid Detection ø11 ø0.433 10 0.394 ø2.2 ø0.087 Wide Beam ChemicalUHVLVWDQW ø2.2 ø1.8 ø2.2 (ø4.33) ø0.087 ø0.071 M6 × 0.75 ø0.087 (ø0.170) (ø3.2) (ø0.126) Model No. tube (PVC) 0.030 Toothed lock washer M6 [Brass(Nickel plated)] FD-61G 5.5 0.217 Narrow Beam 2 0.079 2,000 78.740 2-ø2.2 ø0.087 (30) (1.181) Fiber 2SWLRQV Fiber 'LPHQVLRQV Thru-beam Type ø3.5 ø0.138 M6 × 0.75 0.030 Toothed lock washer M6 [Stainless steel(SUS304)] Hexagon nut M6 [Stainless steel(SUS304)] (ø3.2) (ø0.126) Model No. tube (PVC) ø1 ø0.039 fiber core × 1 (PMMA) Sheath ø2.2 ø0.087 (Polyethylene) End bracket [Stainless steel(SUS303)] 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type 2WKHUV Beam-receiving ø0.25 ø0.010 fiber core × 16 (PMMA) $PSOLILHUV Beam-emitting ø1 ø0.039 fiber core × 1 (PMMA) FX-500 VHULHV Free-cut FD-61W Free-cut FD-62 ø11 ø0.433 10 0.394 2 0.079 5.5 0.217 15 0.591 2 0.079 ø4.5 ø0.177 Hexagon nut M6 [Stainless steel(SUS304)] Toothed lock washer M6 [Stainless steel(SUS304)] 2,000 78.740 2-ø2.2 ø0.087 (30) (1.181) ø11 ø0.433 10 0.394 5.5 0.217 (ø3.2) (ø0.126) Model No. tube (PVC) M6 × 0.75 0.030 ø1 ø0.039 fiber core × 1 (PMMA) Sheath ø2.2 ø0.087 (Polyethylene) End bracket [Stainless steel(SUS303)] FX-100 VHULHV -0.1 -0.004 ø6 ø0.236-0.13 -0.005 2 0.079 15 0.591 2 0.079 ø4.5 ø0.177 Hexagon nut M6 [Stainless steel(SUS304)] Mounting reference surface (Screw periphery) Toothed lock washer M6 [Stainless steel(SUS304)] 2,000 78.740 2-ø2.2 ø0.087 (30) (1.181) INDEX (ø3.2) (ø0.126) Model No. tube (PVC) ø1.5 ø0.059 fiber core × 1 (PMMA) Sheath ø2.2 ø0.087 (Polyethylene) End bracket [Stainless steel(SUS303)] M6 × 0.75 0.030 (DUOLHUPRGHOV FRPSDULVRQ table 44 New product introduction Tough Fiber Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the ampli ers. The CAD data in the dimensions can be downloaded from our website. DIMENSIONS (Unit: mm in) Dimensions are listed in the order of thru-beam type, retrore ective type, and re ective type, and in alphabetic order of the model No. 5HÀHFWLYHW\SH¿EHUV FD-64X &KRRVH E\VKDSH application Protective tube Polyolefin tube included SUS304 spiral tube 22 0.866 2 15 0.079 10 0.591 0.394 Viewing QHZPRGHOV Super Quality Threaded Type Cylindrical Type ø3.8 ø0.150 ø4.5 ø4.5 ø0.177 ø0.177 &KRRVH by model )LEHUV Free-cut FD-A16 Fiber Selection Guide Details of sensing part 5.5 0.217 2-ø2.2 ø0.087 4.5 0.177 5.1 0.201 (30) (1.181) (ø5.1) (ø0.201) Resin plug (ABS) Lens (Norbornene resin) 15 0.591 28 1.102 3.6 0.142 2 0.079 2,000 78.740 2-ø2.2 ø0.087 8 0.315 B Beam-receiving side 9 0.354 Beam axis A Beam-emitting side 2-ø3.3 ø0.130 1,000 39.370 6 0.236 (2.5) (0.098) (5.8) (0.228) 2 0.079 10.7 0.421 Enclosure (PC) 7 0.276 11 11.6 7 0.276 0.433 0.457 Crimping part ø11 ø0.433 End bracket M6 × 0.75 0.030 (ø5.1) (ø0.201) Model No. tube (PVC) [Stainless steel(SUS303)] Hexagon nut M6 [Stainless steel(SUS304)] Toothed lock washer M6 [Stainless steel(SUS304)] ø0.25 ø0.010 fiber core × 9 (PMMA) (each beam-emitting part and beam-receiving part) Sheath ø2.2 ø0.087 (Polyethylene) View A View B Beam-emitting ø1 ø0.039 fiber core × 1 (PMMA) Beam-receiving ø0.25 ø0.010 fiber core × 16 (PMMA) Sleeve Flat Type Free-cut FD-AL11 Small Spot Narrow Beam Wide Beam Convergent Reflective Type Retroreflective Type 20 0.787 13 0.512 5 0.197 VacuumUHVLVWDQW 2-M3 × 0.5 0.020 ø0.48 ø0.019 2-ø2.2 ø0.087 2.5 0.098 1 0.039 15 0.591 3 0.118 5 0.197 Details of sensing part ø0.25 ø0.010 × 16 fiber core (PMMA) Sheath ø2.2 ø0.087 (Polyethylene) 5 0.197 2-ø2.2 ø0.087 4.5 0.177 5.1 0.201 4 0.157 (Set screw tightening range) (30) ø1.5 ø0.059 ø0.9 ø0.035 (1.181) 2,000 78.740 2.5 0.098 20 15 0.787 0.591 Head block (LCP) (ø2.5) (ø0.098) 1,000 39.370 6 0.236 (1) (0.039) 10.7 0.421 (3.1) (0.122) Enclosure (PPS) ChemicalUHVLVWDQW HeatUHVLVWDQW FD-E13 7 11 11.6 0.276 0.433 0.457 10.85 0.427 Sleeve[Stainless steel (SUS304)] Resin plug (ABS) (ø2.5) (ø0.098) Model No. tube (PVC) (ø0.9) (ø0.035) Protective tube (Polyolefin) Details of sensing part Sensing part ø0.25 ø0.010 fiber core × 32 (emitter / receiver alternating line) End bracket [Stainless steel(SUS303)] Liquid Leak / Liquid Detection ø0.125 ø0.005 fiber core × 2 (PMMA) (each beam-emitting part and beam-receiving part) Fiber 2SWLRQV FD-EG30 FD-E23 Fiber 'LPHQVLRQV Thru-beam Type ø3 ø0.118 5HWURUHÀHFWLYH Type ø0.63 ø0.025 (30) (1.181) 5 0.197 15 0.591 1,000 39.370 6 0.236 (1) (0.039) (3.4) (0.134) End bracket [Stainless steel(SUS303)] FX-500 VHULHV Details of sensing part 5.5 1.2 0.217 0.047 10.7 0.421 Beam-receiving 7 11 11.6 side 0.276 0.433 0.457 Beam-emitting side (ø3) (ø0.118) Model No. tube (PVC) Sleeve[Stainless steel(SUS304)] 2-ø2.2 ø0.087 4.5 0.177 5.1 0.201 (ø3) (ø0.118) Resin plug (ABS) (ø1.6) (ø0.063)Protective tube (Polyolefin) (ø3) (ø0.118) $PSOLILHUV FX-100 VHULHV 2-ø2.2 ø0.087 4.5 0.177 5.1 0.201 Resin plug (ABS) (ø1.6)(ø0.063) Protective tube (Polyolefin) 5HÀHFWLYH Type 2WKHUV (30) (1.181) 16 0.630 ø6.5 ø2.3 ø0.256 ø0.091 Details of sensing part 2.8 0.110 500 19.685 6 0.236 10.7 (1) (0.039) 0.421 1.8 (3.6) (0.142) 0.071 Beam-receiving 7 11 11.6 side 0.276 0.433 0.457 Beam-emitting side (ø3) (ø0.118) Model No. tube(PVC) M3 × 0.5 0.020 End bracket [Stainless steel(SUS303)] Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS304)] Toothed lock washer M3 [Stainless steel(SUS304)] Beam-emitting ø0.25 ø0.010 fiber core × 1 (PMMA) Beam-receiving ø0.125 ø0.005 fiber core × 9 (PMMA) INDEX Beam-receiving ø0.125 ø0.005 fiber core × 9 (PMMA) Beam-emitting ø0.25 ø0.010 fiber core × 1 (PMMA) (DUOLHUPRGHOV FRPSDULVRQ table 45 Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the ampli ers. The CAD data in the dimensions can be downloaded from our website. DIMENSIONS (Unit: mm in) Dimensions are listed in the order of thru-beam type, retrore ective type, and re ective type, and in alphabetic order of the model No. 5HÀHFWLYHW\SH¿EHUV FD-EG30S Tough Fiber FD-EG31 2-ø2.2 ø0.087 (ø3) (ø0.118) Resin plug (ABS) (ø1.6) (ø0.063) Protective tube (Polyolefin) Sleeve [Stainless steel(SUS304)] 15 0.591 15 0.591 1.8 0.071 1,000 39.370 6 0.236 10.7 (1) (0.039) 0.421 (3.6) (0.142) Beam-receiving 7 11 11.6 side 0.433 0.457 Beam-emitting 0.276 M3 × 0.5 0.020 side (ø3) (ø0.118) Model No. tube(PVC) Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS304)] Toothed lock washer M3 [Stainless steel(SUS304)] End bracket [Stainless steel(SUS303)] ø6.5 ø0.256 Details of sensing part 2.7 0.106 Toothed lock washer M3[Stainless steel(SUS304)] Beam-emitting ø0.125 ø0.005 fiber core × 1 (PMMA) Free-cut FD-F4 FD-F41 500 19.685 (ø3) (ø0.118) Model No. tube (PVC) 6 0.236 13.5 25 0.531 0.984 2-ø3.2 ø0.126 mounting holes 5 0.197 14 0.551 ø1 ø0.039 × 2 (20) (0.787) 14 0.551 (4.44) (0.175) (1.0) (0.039) 2,000 78.740 4 0.157 2,000 78.740 (50) (1.969) Protective tube Range where cutting is not possible (17) Bending prohibited range (0.8) (0.669) (0.031) (10) Crimping part (0.039) (ø1.15) (ø0.045) )LEHUV Super Quality Threaded Type Cylindrical Type Small Spot Narrow Beam Wide Beam ø1 ø0.039 × 2 Primary sheath: Polyethylene Secondary sheath: [PFA(fluorine resin)] Convergent Reflective Type Retroreflective Type ChemicalUHVLVWDQW (ø4) (ø0.157) Protective tube [PFA(fluorine resin)] HeatUHVLVWDQW 13 0.512 VacuumUHVLVWDQW Liquid Leak / Liquid Detection 10 0.394 Free-cut FD-F71 Free-cut FD-F8Y Fiber Emission indicator Viewing QHZPRGHOV Flat Type Free-cut FD-F41Y &KRRVH E\VKDSH application Sleeve Beam-receiving ø0.125 ø0.005 fiber core × 6 (PMMA) Beam-receiving ø0.125 ø0.005 fiber core × 9 (PMMA) 20 0.787 &KRRVH by model 5.1 0.201 (ø2.5) (ø0.098) Resin plug (ABS) (ø1.2)(ø0.047) Protective tube (Polyolefin) 16 500 19.685 0.630 6 0.236 5.5 (1) (0.039) 1.3 0.051 1.8 10.7 0.217 0.421 0.071 (3.1) (0.122) Beam-receiving 7 11 11.6 side 0.276 0.433 0.457 Beam-emitting M3 × 0.5 0.020 side ø6.5 ø0.256 (ø2.5) (ø0.098) Model No. tube (PVC) End bracket [Stainless steel(SUS303)] Details of sensing part 2.8 0.110 Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS304)] Beam-emitting ø0.25 ø0.010 fiber core × 1 (PMMA) 8 0.315 Fiber Selection Guide 2-ø2.2 ø0.087 4.5 0.177 (30) (1.181) ø2.3 ø0.091 4.5 0.177 5.1 0.201 (30) (1.181) ø0.8 ø0.031 5.5 0.217 New product introduction 5,000 196.850 3,000 118.110 30 1.181 7.8 0.307 1,000 39.370 2-ø1 ø0.039 (26) (1.024) (Bending prohibited range) 16 8 0.315 0.630 Beam-emitting side (Gray) Beam-receiving side (Black) ø0.25 ø0.010 fiber core × 4 (PMMA) Sheath ø1 ø0.039 (Polyethylene) (ø3.1) (ø0.122) Protective tube (PFA) 10 20 0.394 0.787 Enclosure (PFA) 1,000 39.370 (Allowable cutting range) Fiber 2SWLRQV Fiber 'LPHQVLRQV Thru-beam Type ø2.2 ø0.087 × 2 (ø6) (ø0.236) protective tube (Fluorine resin) 10 0.394 22 0.866 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type 2WKHUV SUS mounting bracket 17 0.669 10 0.394 17.7 12.2 0.480 0.697 Assembly dimensions 6.2 0.244 0.3 0.012 5.5 0.217 11 0.433 ø4.2 ø0.165 thru-holes Material: PFA Material: Stainless steel (SUS316) 30 1.181 Details of sensing part 10 15 0.394 0.591 PVC mounting bracket 15.5 10.5 0.413 0.610 17 0.669 FD-F71 11.5 0.453 SUS mounting bracket (9.4) (0.370) 10.3 0.406 7.8 0.307 20.3 28.3 0.799 1.114 0.3 0.012 12 0.472 10 0.394 Free-cut FD-FA93 mounting holes (for tying band) 6.5 3 0.118 0.256 0.9 0.035 2.5 0.098 5.2 0.205 22.2 0.874 ø0.25 ø0.010 fiber core × 9 (PMMA) Sheath ø1.3 ø0.051 (Polyethylene) 30 1.181 5.7 0.224 10 0.394 4 0.157 11 Welding part 0.433 Material: PVC 2,000 78.740 25 0.984 FD-F71 11.5 0.453 10 0.394 Sensing part (emitter / receiver alternating line) 17.1 0.673 (ø0.25 ø0.010 fiber core × 18) PVC mounting bracket 2-ø1.3 ø0.051 3 0.118 FX-500 VHULHV FX-100 VHULHV INDEX Enclosure (ABS) 5.2 0.205 Assembly dimensions 8.75 0.344 $PSOLILHUV 2.5 0.098 (DUOLHUPRGHOV FRPSDULVRQ table 46 DIMENSIONS (Unit: mm in) New product introduction Tough Fiber Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the ampli ers. The CAD data in the dimensions can be downloaded from our website. Dimensions are listed in the order of thru-beam type, retrore ective type, and re ective type, and in alphabetic order of the model No. 5HÀHFWLYHW\SH¿EHUV Free-cut FD-H13-FM2 Fiber Selection Guide &KRRVH by model &KRRVH E\VKDSH application Free-cut FD-H18-L31 'HWDLOVRI VHQVLQJSDUW 16 0.630 15 0.591 5 0.197 5.5 0.217 ø1.5 ø0.059 fiber core × 2 7 0.276 10.75 0.423 2,000 78.740 Viewing QHZPRGHOV 2,000 78.740 20 0.787 6.5 0.256 2.7 0.106 A 19 0.748 Screw tightening face ø5 ø0.197 M6 × 0.75 0.030 )LEHUV ø2.2 ø0.087 × 2 (Fluorine resin) Opposing faces 10 0.394, thickness 2 0.079 Toothed lock washer ø11 ø0.433 8 0.315 4 0.157 5 0.197 Super Quality Threaded Type 2-M3 × 0.5 0.020 Head [Stainless steel (SUS)] Holder [Stainless steel (SUS)] View A ø4.6 ø0.181 Cylindrical Type A ø2.2 ø0.087 × 2 (Fluorine resin) End bracket (Brass) Emitter / Receiver fiber ø1.5 ø0.059 × 1 Sleeve Flat Type Small Spot Narrow Beam Wide Beam Convergent Reflective Type Retroreflective Type ChemicalUHVLVWDQW HeatUHVLVWDQW FD-H20-21 FD-H20-M1 'HWDLOVRI VHQVLQJSDUW Beam-receiving part: ø50 μm ø1.969 mil × 440 Beam-emitting part: ø50 μm ø1.969 mil × 440 1,000 39.370 60 35 30 2.362 1.378 ø3.1 1.181 16.7 18.3 ø10 ø0.122 0.657 0.720 ø0.394 5 0.197 ø5 ø0.197 Emitter mark ø4 ø5 ø0.197 ø0.157 ø2.9 ø0.114 M4 × 0.7 Liner + braid tube Joint 0.028 [Stainless steel (SUS)] 27 1.063 20 0.787 5 0.197 ø2.2 ø0.087 Beamemitting side Beam3.5 receiving 0.138 side ø3 ø0.118 Toothed lock washer ø8.5 ø0.335 [Stainless steel (SUS)] Opposing faces 7 0.276, thickness 2.4 0.094 [Stainless steel (SUS)] VacuumUHVLVWDQW Liquid Leak / Liquid Detection 'HWDLOVRI Heat & cold-resistant specifications VHQVLQJSDUW Ordinary temperature specifications Joint [Brass (Nickel plated)] Beam-receiving part: 28 1,000 inside diameter ø1.1 ø0.043 1.102 39.370 25 150 60 ± 5 outside diameter ø1.6 ø0.063 18.3 16.7 5.906 0.984 2.362 ± 0.197 0.657 0.720 Beamfiber core bundle × 1 15 5 0.591 0.197 receiving 5.5 D side 0.217 ø2.2 ø0.087 BeamP ø9 ø0.354 Screw emitting ø6 ø4.2 ø0.165 (Silicone) tightening face side ø0.236 Fixing plug (PA) ø5 End bracket Beam-emitting part: ø3.5 ø0.197 Fixing bracket ø0.138 [Brass (Nickel plated)] ø1.1 ø0.043 fiber [Brass (Nickel plated)] core bundle × 1 M6 × 0.75 Opposing faces 10 0.394, ø2.9 ø0.114 (Silicone) 0.030 thickness 2 0.079 Toothed lock washer ø11 ø0.433 Fiber 2SWLRQV FD-H25-L43 33.2 1.307 21.7 0.854 Thru-beam Type 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type 2WKHUV FD-H25-L45 Fiber 'LPHQVLRQV 5 0.197 4.5 0.177 6.5 0.256 Heat-resistant specifications ø2.9 ø0.114 3,000 118.110 34.5 1.358 23 0.906 19.5 0.768 Ordinary temperature specifications (150) (5.906) 10 0.394 BeamA emitting side (ø4.33) (ø0.170) BeamA receiving side ø2.2 ø0.087 × 2 21 0.827 2 0.079 ø3.8 ø0.150 5 0.197 4.5 0.177 6.5 0.256 Heat-resistant specifications ø2.9 ø0.114 2 0.079 FX-500 VHULHV FX-100 VHULHV INDEX (DUOLHUPRGHOV FRPSDULVRQ table Slit mask [Stainless steel(SUS)] Beam axis Fiber holder (Heat-resistant resin) (24.2) (0.953) View A ø1.2 ø0.047 (Beam-receiving fiber ø1.5 ø0.059) fiber core × 1 10 0.394 BeamA emitting side (ø4.33) (ø0.170) BeamA receiving side ø2.2 ø0.087 × 2 ø3.8 ø0.150 2-mounting holes for M3 countersunk head screw Prism(BK7) Enclosure (Heat-resistant resin) ø5 ø0.197 19.5 0.768 Tube [Stainless steel(SUS)] 2-mounting holes for M3 countersunk head screw Prism(BK7) Ordinary temperature specifications (150) (5.906) 21 0.827 Tube [Stainless steel(SUS)] $PSOLILHUV 3,000 118.110 Slit mask [Stainless steel(SUS)] Beam axis Fiber holder (Heat-resistant resin) Enclosure (Heat-resistant resin) ø5 ø0.197 View A (24.2) (0.953) ø1.2 ø0.047 (Beam-receiving fiber ø1.5 ø0.059) fiber core × 1 Resin plug(PA) Resin plug(PA) Fixing bracket [Brass(Nickel plated)] Fixing bracket [Brass(Nickel plated)] 47 DIMENSIONS (Unit: mm in) Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the ampli ers. The CAD data in the dimensions can be downloaded from our website. Dimensions are listed in the order of thru-beam type, retrore ective type, and re ective type, and in alphabetic order of the model No. 5HÀHFWLYHW\SH¿EHUV FD-H30-KZ1V-S 15 0.591 1,000 39.370 30 1.181 11 0.433 ø4 ø0.157 ø3.6 ø0.142 9.5 0.374 2-ø1 ø0.039 vent holes 20 0.787 7 0.276 4 0.157 ø4 ø0.157 10.75 0.423 Mounting cap nut opposing faces 8 0.315 [Stainless steel (SUS)] Joint [Stainless steel (SUS)] End bracket [Stainless steel (SUS)] Enclosure [Stainless steel (SUS)] 4.6 0.181 2,000 78.740 16.7 0.657 16.7 6.5 0.657 0.256 ø5 ø4 ø2.9 ø0.197 ø0.157 ø0.114 4 0.157 Tube [Stainless steel (SUS)] 4.6 0.181 t 1.2 t 0.047 5 0.197 2-M3 × 0.5 0.020 ø4 ø0.157 12.2 0.480 10.2 0.402 14 0.551 )LEHUV Super Quality Threaded Type Holder [Stainless steel (SUS)] View A ø4.6 ø0.181 Emitter / Receiver fiber ø1.2 ø0.047 fiber core × 1 4 0.157 3.3 0.130 4 0.157 Viewing QHZPRGHOV Cylindrical Type 3.3 0.130 6 0.236 &KRRVH E\VKDSH application End bracket [Stainless steel (SUS)] 2-M3 × 0.5 0.020 Head [Stainless steel (SUS)] Assembly dimensions with MS-FD-2 (attached mounting bracket) 15 0.591 &KRRVH by model 18.3 0.720 A ø2.2 ø0.087 Fixing plug (PA) Fixing bracket [Brass (Nickel plated)] ø2.7 ø0.106 5.2 0.205 Fiber Selection Guide A 8 0.315 19 0.748 Liner + braid tube [Stainless steel (SUS)] 9.5 0.374 Tough Fiber FD-H30-L32 21.7 (0.854 ) Glass lens (BK7) New product introduction Sleeve Flat Type Small Spot Mounting bracket (MS-FD-2) 7 0.276 [Stainless steel (SUS)] Narrow Beam 5.2 0.205 Wide Beam Note: The FD-H30-KZ1V-S is a set with the FD-H30-KZ1V, photo-terminal FV-BR1, and atmospheric side ber FT-J8. Refer to p.51 for dimensions of the atmospheric side ber and photo-terminals. Convergent Reflective Type Retroreflective Type FD-H30-L32V-S 7 0.276 20 0.787 (1.2 0.047) 8 0.315 16.7 (0.657 ) ø3.6 ø0.142 30 1.181 11 0.433 'HWDLOVRI VHQVLQJSDUW 4 0.157 ø4 ø0.157 Mounting cap nut opposing faces 8 0.315 [Stainless steel (SUS)] End bracket [Stainless steel (SUS)] Liner + braid tube 2-M3 × 0.5 0.020 Enclosure [Stainless steel (SUS)] [Stainless steel (SUS)] Holder [Stainless steel (SUS)] 4 0.157 ø4.6 ø0.181 ChemicalUHVLVWDQW 90 3.543 Allowable bending range 5 0.197 10 Beam-receiving part: 0.394 ø50 μm ø1.969 mil × 380 27 1.063 20 0.787 10 0.394 ø4 ø0.157 ø2.1 ø0.083 [Stainless steel (SUS)] ø3 ø0.118 Joint [Stainless steel (SUS)] Rod prism (BK7) 5 0.197 3,000 118.110 6.5 0.256 ø4 ø0.157 10.75 0.423 19 0.748 FD-H35-20S 1,000 39.370 35 60 1.378 30 2.362 16.7 18.3 1.181 0.657 0.720 ø2.2 5 ø0.087 0.197 ø5 ø0.197 ø2.9 ø0.114 Resin plug (PA) ø10 ø0.394 Joint ø3.1 ø5 ø0.197 ø0.122 M4 × 0.7 0.028 Liner + braid tube [Stainless steel (SUS)] Opposing faces 7 0.276, thickness 2.4 0.094 [Stainless steel (SUS)] Toothed lock washer ø8.5 ø0.335 [Stainless steel (SUS)] Beam-emitting part: ø50 μm ø1.969 mil × 380 3.4 (0.134 ) ø2.7 ø0.106 Liquid Leak / Liquid Detection Fiber 2SWLRQV Thru-beam Type FD-H35-M2 'HWDLOVRI VHQVLQJSDUW Heat & cold-resistant Ordinary temperature specifications specifications 3 22 2,000 Beam-receiving part: 0.118 0.866 78.740 inside diameter ø1.8 ø0.071 150 30 60 ± 5 outside diameter ø2.2 ø0.087 5.906 1.181 2.362 ± 0.197 17 fiber core bundle × 1 5 0.669 0.197 5HWURUHÀHFWLYH Type 16.7 0.657 D ø5 ø0.197 ø4 ø0.157 [Stainless steel (SUS)] M6 × 0.75 0.030 [Stainless steel (SUS)] FD-H35-M2S6 ø1.8 ø0.071 fiber core bundle × 1 emitting and receiving VacuumUHVLVWDQW Fiber 'LPHQVLRQV Note: The FD-H30-L32V-S is a set with the FD-H30-L32V, photo-terminal FV-BR1, and atmospheric side ber FT-J8. Refer to p.51 for dimensions of the atmospheric side ber and photo-terminals. 'HWDLOVRI VHQVLQJSDUW HeatUHVLVWDQW Heat & cold-resistant Ordinary temperature specifications specifications 2,000 22 60 78.740 0.866 2.362 60 ± 5 30 150 2.362 ± 0.197 1.181 5.906 5 17 5 0.197 0.669 0.197 Beam-emitting part: ø1.3 ø0.051 fiber core bundle × 1 16.7 0.657 Beamreceiving side ø2.2 ø0.087 Beamemitting side Fixing plug (PA) Fixing bracket [Brass (Nickel plated)] Opposing faces 10 0.394, thickness 2 0.079 [Stainless steel (SUS)] Toothed lock washer ø11 ø0.433 [Stainless steel (SUS)] ø5 ø0.197 [Stainless steel (SUS)] ø10 ø0.394 ø3 ø0.118 ø5 ø0.197 (Silicone) ø3.8 ø0.150 [Stainless steel (SUS)] ø2.8 ø0.110 [Stainless steel (SUS)] ø4 ø0.157 [Stainless steel (SUS)] M6 × 0.75 0.030 [Stainless steel (SUS)] Toothed lock washer ø11 ø0.433 [Stainless steel (SUS)] ø10 ø0.394 Joint [Brass ø3 ø0.118 (Nickel plated)] (Silicone) 2WKHUV P $PSOLILHUV FX-500 VHULHV FX-100 VHULHV ø5 ø0.197 ø5 ø0.197 5HÀHFWLYH Type Free-cut FD-HF40Y 18.3 0.720 18.3 0.720 INDEX 500 ø2.2 ø0.087 ø3.8 ø0.150 Fixing plug (PA) [Stainless steel (SUS)] ø5 ø0.197 Fixing bracket [Stainless steel (SUS)] [Brass (Nickel plated)] Opposing faces 10 0.394, thickness 2 0.079 [Stainless steel (SUS)] 2,000 78.740 19.685 (50) (1.969) Protective tube Range where cutting is not possible (4.44) (0.175) (1.0) (0.039) (0.8) (0.031) (ø1.15) (ø0.045) (17) Bending prohibited range (0.669) (10) Crimping part (0.394) (ø4) (ø0.157) Protective tube [PFA(fluorine resin)] ø1 ø0.039 × 2 (Polyethylene) (DUOLHUPRGHOV FRPSDULVRQ table 48 New product introduction Tough Fiber DIMENSIONS (Unit: mm in) Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the ampli ers. The CAD data in the dimensions can be downloaded from our website. Dimensions are listed in the order of thru-beam type, retrore ective type, and re ective type, and in alphabetic order of the model No. 5HÀHFWLYHW\SH¿EHUV Free-cut FD-L10 Fiber Selection Guide &KRRVH by model &KRRVH E\VKDSH application Viewing QHZPRGHOV 19 0.748 7 0.276 2 0.079 Lens (PMMA) 12 0.472 4.5 0.177 Slit mask [Stainless steel (SUS304-CSP-H)] 2.5 0.8 0.031 0.098 3 0.118 ø0.75 ø0.030 fiber core × 1 (PMMA) 2,000 78.740 Sheath ø1.3 ø0.051 (Polyethylene) 3.5 0.138 ø1.3 ø0.051 ø1 ø0.039 Beam-receiving side (7) (0.276) Beam-emitting side ø0.5 ø0.020 fiber core × 1 (PMMA) Sheath ø1 ø0.039 (Polyethylene) Enclosure (PC) 12 0.472 Free-cut Free-cut FD-L20H 0.5 0.020 7 0.276 1.5 0.059 Sleeve Flat Type 7.2 0.283 (ø2) (ø0.079) Model No. tube (PVC) Mounting holes for M2 countersunk head screw 2-ø1 ø0.039 Beam axis 2 0.079 Wide Beam 2,000 78.740 2.5 0.098 13 0.512 18 0.709 Enclosure (PC) Prism (PC) Narrow Beam 14 0.551 1,000 39.370 2.5 0.098 (30) (5) (0.197) (1.181) 0.5 0.020 Lens (PMMA) Free-cut FD-L21 21 0.827 6.5 7 0.256 0.276 3 0.118 HeatUHVLVWDQW 6 0.236 Free-cut FD-L21W 24 0.945 16 0.630 2,000 78.740 2-mounting holes for M3 countersunk head screw 3 0.118 2-ø1 ø0.039 ø0.5 ø0.020 fiber core × 1 (PMMA) Sheath ø1 ø0.039 (Polyethylene) (19) (0.748) 21 0.827 6.5 7 0.256 0.276 Front film (Polyester) Enclosure (ABS) 4 0.157 (19) (0.748) 0.5 ø0.020 × 1 fiber øcore (Acrylic) Sheath ø1 ø0.039 (Polyethylene) Free-cut FD-L22A 29 1.142 6.5 18 0.709 2.5 0.098 0.256 Free-cut FD-L23 2,000 78.740 2-ø1.3 ø0.051 (15.3) 10 0.394 (0.602) 12 0.472 2 0.079 Enclosure (ABS) 2-mounting holes for M3 countersunk head screw 3.8 0.150 Beam axis 2WKHUV 2.5 0.098 Beam-emitting side (Gray) Beam-receiving side (Black) 2-mounting holes for M3 countersunk head screw 3.8 0.150 Beam axis (4.88) (0.192) ø0.25 ø0.010 fiber core × 9 (PMMA) Sheath ø1.3 ø0.051 (Polyethylene) 3,000 118.110 2-ø1.3 ø0.051 Beam-emitting side (Gray) (16.3) (0.642) Beam-receiving (4.8) (0.189) side (Black) ø0.25 ø0.010 fiber core × 9 (PMMA) Sheath ø1.3 ø0.051 (Polyethylene) (1.8) (0.071) Enclosure (PC) Free-cut FD-L30A (1.8) (0.071) Free-cut FD-L31A 29 1.142 18 0.709 6.5 2.5 0.098 0.256 INDEX 2-mounting holes for M3 countersunk head screw 3.8 0.150 Beam axis 3,000 118.110 3 0.118 2-ø1.3 ø0.051 Beam-emitting side (Gray) (17.3) (0.681) Beam-receiving side (Black) (5.3) (0.209) 20 0.787 (DUOLHUPRGHOV FRPSDULVRQ table 29 1.142 6.5 18 0.709 0.256 18 0.709 $PSOLILHUV FX-100 VHULHV Front film (Polyester) (2) (0.079) Thru-beam Type FX-500 VHULHV Beam axis Enclosure (ABS) Fiber 'LPHQVLRQV 17 0.669 2-ø1 ø0.039 Beam axis (2) (0.079) 4 0.157 Fiber 2SWLRQV 2,000 78.740 2-mounting holes for M3 countersunk head screw 16 0.630 24 0.945 Liquid Leak / Liquid Detection 5HÀHFWLYH Type ø0.5 ø0.020 fiber core × 1 (PMMA) Sheath ø1 ø0.039 (Polyethylene) ChemicalUHVLVWDQW 5HWURUHÀHFWLYH Type 2-ø1 ø0.039 Enclosure (ABS) ø0.5 ø0.020 fiber core × 1 (PMMA) Sheath ø1 ø0.039 (Polyethylene) 1.5 0.059 ø1.6 ø0.063 3 8 2-ø 0.11 ø Small Spot VacuumUHVLVWDQW 8 0.315 0.6 2.9 0.024 0.114 2-mounting holes for M3 countersunk head screw Enclosure (PC) 3 0.118 Beam (1.15) (0.045) axis 2-mounting holes for M3 countersunk head screw FD-L12W Cylindrical Type Retroreflective Type ø0.75 ø0.030 fiber core × 1 (PMMA) 2,000 78.740 3.5 Sheath ø1.3 ø0.051 (Polyethylene) 0.138 ø1.3 ø0.051 ø1 ø0.039 Beam-receiving side (7) (0.276) Beam-emitting side ø0.5 ø0.020 × 1 fiber core (Acrylic) Sheath ø1 ø0.039 (Polyethylene) (1.15) (0.045) Super Quality Convergent Reflective Type 19 0.748 7 0.276 2 0.079 Lens (PMMA) )LEHUV Threaded Type Free-cut FD-L11 ø0.25 ø0.010 fiber core × 9 (PMMA) Sheath ø1.3 ø0.051 (Polyethylene) (1.95) (0.077) 29 1.142 6.5 18 0.709 0.256 3,000 118.110 (2.1) (0.083) 2-ø2.2 ø0.087 Beam-emitting side 23.5 0.925 (19.4) (0.764) Beam-receiving side ø1 ø0.039 fiber core × 1 (PMMA) Sheath ø2.2 ø0.087 (Polyethylene) 2-mounting holes for M3 countersunk head screw 4.5 0.177 Beam axis ø0.25 ø0.010 fiber core × 16 (PMMA) Sheath ø2.2 ø0.087 (Polyethylene) Enclosure (ABS) Enclosure (ABS) (2.3) (0.091) 49 DIMENSIONS (Unit: mm in) Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the ampli ers. The CAD data in the dimensions can be downloaded from our website. Dimensions are listed in the order of thru-beam type, retrore ective type, and re ective type, and in alphabetic order of the model No. 5HÀHFWLYHW\SH¿EHUV Free-cut FD-L32H 25 0.984 (8) (0.315) 15 0.591 15 0.591 7.5 0.295 7.3 0.287 25 0.984 20 0.787 2,000 78.740 M6 × 0.75 0.030 2-ø3.2 ø0.126 mounting holes ø5.7 ø0.224 spot facing deep 2.6 0.102 3-ø3.2 ø0.126 (0.5 0.020 deep, on both sides) 2 0.079 ø4.5 ø0.177 Hexagon nut M6 [Stainless steel (SUS304)] (30) Fixing bracket (1.181) [Stainless steel(SUS303)] (ø3.2) (ø0.126) Model No. tube (PVC) R5±1 ø5 ø0.197 R0.197±0.039 ø1.2 ø0.047 5 0.197 ø1 ø0.039 fiber core × 1 (PMMA) Sheath ø2.2 ø0.087 (Polyethylene) ø1.2 ø0.047 Stainless steel pipe 90°±5 [Stainless steel(SUS304)] End bracket [Stainless steel(SUS303)] 5 0.197 Toothed lock 13 washer M6 0.512 [Stainless steel (SUS304)] -0.1 -0.004 2 0.079 ø6 ø0.236-0.13 -0.005 Mounting reference surface (Screw periphery) (30) (1.181) ø1 ø0.039 ø1.5 ø0.059 2 0.079 Details of sensing part 8 0.315 2-ø2.2 ø0.087 Sheath ø1 ø0.039 (Polyethylene) End bracket [Stainless steel (SUS303)] 2 0.079 8 0.315 4 Set screw tightening range 0.157 (ø2.5) (ø0.098) 4.5 0.177 1,000 39.370 6 10.7 (1) (0.039) 0.236 0.421 (3.1) (0.122) ø2 ø0.079 7 11 11.6 0.276 0.433 0.457 Resin plug (ABS) (ø2.5) (ø0.098) Model No. tube (PVC) Super Quality Threaded Type Small Spot Narrow Beam 5.1 0.201 ø1 ø0.039 )LEHUV Sleeve FD-S30 (Set screw tightening range) Viewing QHZPRGHOV Flat Type 4 0.157 &KRRVH E\VKDSH application Cylindrical Type ø11 ø0.433 10 0.394 FD-S21 Fiber Selection Guide &KRRVH by model 2-ø2.2 ø0.087 2-ø2.2 ø0.087 ø1.5 ø0.059 fiber core × 1 (PMMA) Sheath ø2.2 ø0.087 (Polyethylene) Enclosure (ABS) Lens (Norbornene resin) 4,000 157.480 4.5 0.177 (16.7) (0.657) Tough Fiber Free-cut FD-R60 30 1.181 6.5 0.256 New product introduction 2,000 78.740 Resin plug(ABS) (20) (0.787) ø3 ø0.118 Mounting reference surface (Periphery) Wide Beam (19.7) (0.776) 10.2 0.402 (0.3) (0.012) ø2.2 ø0.087 (ø4.33) (ø0.170) ø1 ø0.039 (ø2) (ø0.079) Model No. tube (PVC) ø1.8 ø0.071 Convergent Reflective Type Retroreflective Type ChemicalUHVLVWDQW HeatUHVLVWDQW End bracket [Stainless steel (SUS303)] VacuumUHVLVWDQW Liquid Leak / Liquid Detection ø0.25 ø0.010 fiber core × 2 (PMMA) (each beam-emitting part and beam-receiving part) Fiber 2SWLRQV Free-cut FD-S31 Free-cut FD-S32 2 0.079 8 0.315 ø2 ø0.079 2,000 78.740 ø1 4 0.157 (Set screw tightening range) ø0.039 (30) (1.181) 2.7 0.106 2,000 78.740 (30) (1.181) 15 0.591 7 0.276 End bracket [Stainless steel (SUS303)] End bracket [Stainless steel (SUS303)] (ø2) (ø0.079) Model No. tube (PVC) ø0.5 ø0.020 Fiber core × 1 (Acryic) Sheath ø1 ø0.039 (Polyethylene) Thru-beam Type 2-ø1.3 ø0.051 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type ø3 ø0.118 ø3 ø0.118 -0.07 -0.003 -0.1 -0.004 Mounting reference surface (Periphery) Fiber 'LPHQVLRQV (ø2.5) (ø0.098) Model No. tube (PVC) ø1 ø0.039 fiber core × 1 (PMMA) Sheath ø1.3 ø0.051 (Polyethylene) 2WKHUV $PSOLILHUV Free-cut FD-S32W Free-cut FD-S33GW 2.7 0.106 15 0.591 7 0.276 15 0.591 7 0.276 2,000 78.740 (30) (1.181) 2,000 78.740 (30) (1.181) Beam-emitting side End bracket [Stainless steel (SUS303)] ø1.3 ø0.051 (ø2.5) (ø0.098) Model No. tube (PVC) ø1 ø0.039 fiber core × 1 (PMMA) Sheath ø1.3 ø0.051 (Polyethylene) Details of sensing part ø3 ø0.118 End bracket [Stainless steel (SUS303)] FX-100 VHULHV ø1 ø0.039 2-ø1.3 ø0.051 ø3 ø0.118 FX-500 VHULHV INDEX Beam-receiving side (ø2) (ø0.079) Model No. tube (PVC) Sheath ø1 ø0.039 (Polyethylene) Sheath ø1.3 ø0.051 (Polyethylene) 2.7 0.106 Beam-receiving ø0.25 ø0.010 fiber core × 9 (PMMA) Beam-emitting ø0.5 ø0.020 fiber core × 1 (PMMA) (DUOLHUPRGHOV FRPSDULVRQ table 50 New product introduction Tough Fiber DIMENSIONS (Unit: mm in) Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the ampli ers. The CAD data in the dimensions can be downloaded from our website. Dimensions are listed in the order of thru-beam type, retrore ective type, and re ective type, and in alphabetic order of the model No. 5HÀHFWLYHW\SH¿EHUV Free-cut FD-V30 Fiber Selection Guide 2.8 0.110 &KRRVH by model &KRRVH E\VKDSH application Super Quality Threaded Type ø3 ø0.118 Sleeve [Stainless steel(SUS303)] End bracket [Stainless steel (SUS303)] View A Shielding plate (Polyester) Free-cut FD-V50 4.5 0.177 10 0.394 Set screw tightening range 15 0.591 20 0.787 A ø5 ø0.197 ø2 ø0.079 2,000 78.740 2-ø2.2 ø0.087 (30) (1.181) Sleeve [Stainless steel(SUS304)] End bracket [Stainless steel (SUS303)] (ø3.2) (ø0.126) Model No. tube (PVC) 5 0.197 Free-cut 2 0.079 3.5 0.138 2.5 0.098 2.2 0.087 10 4 0.157 0.394 1,000 39.370 ø2.2 ø0.087 hole, ø3.6 ø0.142 spot facing, 1.4 0.055 deep 2-ø1 4-R1 R0.039 (30) ø0.039 (1.181) Beam axis (DUOLHUPRGHOV FRPSDULVRQ table (ø3) (ø0.118) Model No. tube (PVC) 1 0.039 3.5 3.5 0.138 0.138 1.2 0.047 7 0.276 14 6.5 2.2 0.087 0.551 0.256 7 0.276 2,000 78.740 ø3.2 ø0.126 hole, ø5.6 ø0.220 spot facing, 2.2 0.087 deep Inner pipe [Stainless steel (SUS)] Multi-core fiber (Fiber core: acrylic, Sheath: polyethylene) (20) (0.787) 3.5 0.138 Beam axis A A ø1.3 ø 0.051 × 2 Prism (Acrylic) (ø3.2) (ø0.118) Model No. tube (PVC) 1.05 0.041 Multi-core fiber ø0.075 ø0.003 × 151 Free-cut FD-Z50HW ø0.5 ø0.020 fiber core × 1 (PMMA) 0.6 0.024 Sheath ø1 ø0.039 (Polyethylene) 11 0.433 ø2.4 ø0.094 7 0.276 Beam axis ø1 ø0.039 fiber core × 1 (PMMA) 0.9 Sheath ø1.3 ø0.051 (Polyethylene) 0.035 2,000 78.740 Enclosure (PC) 5.2 0.205 Beam axis 2-ø1.3 ø0.051 (ø2.5) (ø0.098) Model 2.7 0.106 No. tube (PVC) 1.6 0.063 1 0.039 4.6 0.181 9.5 0.374 2,000 78.740 3.5 4-R1 R0.039 0.138 Enclosure (PC) (30) (2.2) (0.087) (1.181) 3.5 0.138 2.2 0.087 14 6.5 0.256 0.551 15 0.591 Lens (BK7) Free-cut ø3.2 ø0.126 hole, ø5.6 ø0.220 spot facing, 2.2 0.087 deep 1 3.5 0.138 0.039 1.05 0.041 Inner pipe [Stainless steel(SUS304)] 1.05 0.041 A A ø1 ø 0.039 × 2 Free-cut ø1 View A ø0.039 FD-Z40HBW INDEX Prism Beam (Acrylic) axis ø2.4 ø0.094 Enclosure (Polycarbonate) (2.2) (0.087) (ø2) (ø0.079) Model No. tube (PVC) Inner pipe ø1.5 [Stainless steel(SUS304)] Enclosure (PC) ø0.059 7 1 0.039 2.1 0.083 0.276 7 0.276 (20) (0.787) FD-Z20HBW 2WKHUV FX-100 VHULHV 2 0.079 2.5 0.098 1.2 0.047 2.2 10 4 0.157 0.087 0.394 Multi-core fiber ø0.0375 ø0.001 × 151 1.7 0.067 0.5 0.020 1.05 0.041 1,000 39.370 ø2.2 ø0.087 hole, ø3.6 ø0.142 spot facing, 1.4 0.055 deep Inner pipe [Stainless steel (SUS)] Multi-core fiber (Fiber core: Acrylic, Sheath: Polyethylene) FD-WZ7 2.3 0.091 3 0.118 5HÀHFWLYH Type FX-500 VHULHV 7 0.276 View A ø0.5 ø0.020 ø0.75 ø0.030 fiber core × 1 (PMMA) Sheath ø2.2 ø0.087 (Polyethylene) View A 5HWURUHÀHFWLYH Type $PSOLILHUV 5 0.197 3.5 0.138 ø1.5 Enclosure ø0.059 (Polycarbonate) Thru-beam Type 0.5 0.020 Beam axis 10 0.394 Fiber 'LPHQVLRQV Free-cut FD-WZ4 Shielding plate (Polyester) Fiber 2SWLRQV (ø2) (ø0.079) Model No. tube (PVC) ø0.5 ø0.020 fiber core × 1 (PMMA) Sheath ø1 ø0.039 (Polyethylene) View A Shielding plate (Polyester) VacuumUHVLVWDQW Liquid Leak / Liquid Detection End bracket [Stainless steel (SUS303)] 1.3 0.051 Retroreflective Type HeatUHVLVWDQW 2,000 78.740 2-ø1 ø0.039 (30) (1.181) ø3 ø0.118 2 0.079 2.5 0.098 1.3 0.051 Convergent Reflective Type ChemicalUHVLVWDQW 15 0.591 ø1.5 ø0.059 Sleeve [Stainless steel(SUS304)] (ø2) (ø0.079) Model No. tube (PVC) ø0.5 ø0.020 fiber core × 1 (PMMA) Sheath ø1 ø0.039 (Polyethylene) 2 0.079 2.5 0.098 Small Spot Wide Beam Beam axis 15 0.591 A Set screw tightening range 10 0.394 2.8 0.110 2,000 78.740 2-ø1 ø0.039 (30) (1.181) Flat Type Narrow Beam Set screw tightening range 15 0.591 ø1.5 ø0.059 A Cylindrical Type Sleeve 10 0.394 Beam axis 15 0.591 Viewing QHZPRGHOV )LEHUV Free-cut FD-V30W 2-ø2.2 ø0.087 ø1 ø0.039 fiber core × 1 (PMMA) Sheath ø2.2 ø0.087 (Polyethylene) Assembly dimensions with MS-FD-2 (attached mounting bracket) Lens (BK7) 9.5 0.374 4.6 0.181 12.2 0.480 5 0.197 10.2 0.402 1 0.039 15 2,000 78.740 0.591 2-M3 × 0.5 0.020 3.3 0.130 4 0.157 3.3 0.130 1.2 0.047 6 0.236 Beam axis 14 0.551 4 0.157 7 0.276 5.2 0.205 MS-FD-2 Mounting bracket [Stainless steel(SUS304)] Enclosure (PC) 2-ø2.2 ø0.087 ø1 ø0.039 fiber core × 1 (PMMA) Sheath ø2.2 ø0.087 (Polyethylene) 51 DIMENSIONS (Unit: mm in) Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the ampli ers. The CAD data in the dimensions can be downloaded from our website. New product introduction Tough Fiber 9DFXXPUHVLVWDQW$WPRVSKHULFVLGH¿EHU Free-cut FT-J8 (Accessory for vacuum-resistant ber) Photo-terminal side Fiber Selection Guide Amplifier side &KRRVH by model 2,000 78.740 4 0.157 10 0.394 ø3.6 ø0.142 &KRRVH E\VKDSH application ø2.2 ø0.087 11 0.433 Viewing QHZPRGHOV Mounting cap nut opposing faces 8 0.315 [Stainless steel (SUS)] ø4 ø0.157 Joint [Brass (C3604) (Nickel plated)] )LEHUV Super Quality Threaded Type Cylindrical Type Fiber bender (Optional) FB-1 FTP- Protective tube (Optional) FDP- FTP- , FDP-N 52 2.047 40 1.575 L 15 0.591 15 0.591 3 0.118 20 0.787 ø15 ø0.591 Wide Beam ø4.5 ø0.177 spiral tube [Stainless steel (SUS)] Material: PP (Containing steel blade) Chamber wall or flange M4 × 0.7 0.028 internal thread, 5 0.197 deep FTP-N ø5.5 to ø6.0 ø0.217 to ø0.236 M5 × 0.8 0.031 thread [Stainless steel (SUS)] 5 0.197 ø3.8 ø0.150 spiral tube [Stainless steel (SUS)] ø5 ø0.197 [Brass (Nickel plated)] M2.6 × 0.45 0.018 internal thread, 3 0.118 deep M6 × 0.75 0.030 thread [Stainless steel (SUS)] FDPL 15 0.591 3 0.118 15 0.591 ø7 ø0.276 spiral tube [Stainless steel (SUS)] ø8 ø0.315 [Brass (Nickel plated)] M6 × 0.75 0.030 internal thread, 5 0.197 deep Vacuum-resistant side-view lens (Optional) 4.7 0.185 10.5 0.413 HeatUHVLVWDQW Liquid Leak / Liquid Detection Fiber 2SWLRQV Thru-beam Type M10 × 1 0.039 thread [Brass (Nickel plated)] 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type FTP-1000, FTP-N1000, FDP-N1000, FDP-1000 FTP-1500, FTP-N1500, FDP-N1500, FDP-1500 9.5 0.374 7.3 0.287 3.6 0.142 ø18 ø0.709 Length L FTP-500, FTP-N500, FDP-N500, FDP-500 4.5 0.177 ChemicalUHVLVWDQW M3 × 0.5 0.020 internal thread, 5 0.197 deep Model No. Material: Enclosure .......Aluminum alloy (A6061-T6) Lens...............BK-7 Lens (BK7) Retroreflective Type Fiber 'LPHQVLRQV 3.7 0.146 Enclosure [Stainless steel (SUS)] ø11 ø0.433 3.7 0.146 ø4 ø0.157 FV-SV2 15 0.591 Convergent Reflective Type VacuumUHVLVWDQW Vacuum-resistant expansion lens (Optional) ø3.6 ø0.142 lens ø1 ø0.039 vent hole 2 0.079 14 0.551 M5 × 0.8 0.031 thread O-ring Spring washer ø10 ø0.394 Opposing faces 8 0.315, thickness 3 0.118 9.2 0.362 6 0.236 4 0.157 L 15 0.591 Hole FV-LE1 M8 × 1 0.039 thread [Brass (Nickel plated)] ø6 ø0.236 [Brass (Nickel plated)] FV-BR1 Photo-terminal (for vacuum-resistant) (with vacuum-resistant ber) Mounting hole Small Spot Narrow Beam 8.6 0.341 36 +10 1.417 +0.039 0 6 0.236 2 0.079 Sleeve Flat Type Length L 500 +100 19.685 +0.394 0 1,000 +100 39.370 +0.394 0 1,500 +100 59.055 +0.394 0 2WKHUV $PSOLILHUV Heat resistant adhesive FX-500 VHULHV 2-ø3.1 ø0.122 FX-100 VHULHV 2.8 0.110 6.6 0.260 ø1 ø0.039 vent hole 5.5 0.217 3.6 0.142 M2.6 × 0.45 0.018, 3.2 0.126 deep INDEX (DUOLHUPRGHOV FRPSDULVRQ table 52 New product introduction Tough Fiber DIMENSIONS (Unit: mm in) Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the ampli ers. The CAD data in the dimensions can be downloaded from our website. FX-AT2 Attachment for xed-length ber (Accessory for xed-length ber) &KRRVH by model (Accessory for ø2.2 mm ø0.087 in ber) 8 0.315 6 0.236 Fiber Selection Guide Attachment for ø2.2 mm ø0.087 in ber FX-AT3 &KRRVH E\VKDSH application Material: POM )LEHUV FX-AT4 20.5 0.807 3.5 0.138 6.5 2 0.256 0.079 ø2.2 ø0.087 Material: Holder ....PA (Nylon 66) Ground...POM Small Spot Convergent Reflective Type 3 0.118 4 0.157 20.5 0.807 3.5 0.138 15 7 0.591 0.276 5 0.197 1.7 0.067 ø2.2 ø0.087 VacuumUHVLVWDQW Material: Holder .............PA (Nylon 66) Ground ............POM Fiber 'LPHQVLRQV 9.2 0.362 Thru-beam Type FX-500 VHULHV FX-100 VHULHV 15 7 0.591 0.276 5 0.197 1.7 0.067 ø2.2 ø0.087 Fiber cutter (Accessory for free-cut type ber) FX-CT2 ø4.3 ø0.169 Material: Enclosure ........... Brass (Nickel plated) Lens ................... Glass 8 0.315 45 1.772 ø1.4 ø0.055 25 0.984 Material: ABS Super-expansion lens (Optional) FX-LE2 22.2 0.874 17 0.669 8 5 0.315 0.197 Lens Knurled surface ø9 ø0.354 ø7 ø0.276 ø12 ø10.2 ø0.472 ø0.402 M2.6 × 0.45 0.018 internal thread, 3 0.118 deep 6 0.236 M4 × 0.7 0.028 internal thread, 6 0.236 deep Material: Enclosure ........... Stainless steel (SUS303) Lens ................... Glass Pinpoint spot lens (Optional) FX-MR1 ø4 ø0.157 Lens Lens Effective dia.: ø3.3 ø0.130 Zoom lens (Optional) FX-MR2 27.1 1.067 20 0.787 Mounting drawing with FD-G4 7 0.276 4.5 0.177 ø8 ø0.315 ø7.1 ø0.280 20.2 0.795 11 0.433 INDEX ø6 ø0.236 (DUOLHUPRGHOV FRPSDULVRQ table ø1.4 ø0.055 ø1.4 ø0.055 5 0.197 ø1.1 ø0.043 2WKHUV $PSOLILHUV ø2.2 ø0.087 6.5 0.256 14.6 0.575 Expansion lens (Optional) FX-LE1 ø4 ø0.157 5HÀHFWLYH Type 2 0.079 ø2.2 ø0.087 6.5 0.256 5 0.197 HeatUHVLVWDQW 5HWURUHÀHFWLYH Type 2 0.079 (Accessory for ø1 mm ø0.039 in / ø1.3 mm ø0.051 in mixed ber) ChemicalUHVLVWDQW Fiber 2SWLRQV 3.5 0.138 Material: Holder .............PA (Nylon 66) Ground ............POM FX-AT6 Attachment for ø1 mm ø0.039 in / ø1.3 mm ø0.051 in mixed ber Retroreflective Type Liquid Leak / Liquid Detection 3 0.118 4 0.157 ø1.1 ø0.043 Narrow Beam Wide Beam (Accessory for ø1.3 mm ø0.051 in ber) 20.5 0.807 ø1.1 ø0.043 5 0.197 7 15 0.591 0.276 5 0.197 1.7 0.067 ø2.2 ø0.087 Sleeve Flat Type Attachment for ø1.3 mm ø0.051 in ber FX-AT5 (Accessory for ø1 mm ø0.039 in ber) Cylindrical Type 11.2 16 0.441 0.630 Material: Polycarbonate Attachment for ø1 mm ø0.039 in ber 3 0.118 4 0.157 5 0.197 4 0.157 7 0.276 7 0.276 Super Quality Threaded Type 8.2 0.323 14 0.551 7 13 0.276 0.512 Viewing QHZPRGHOV 9.1 0.358 7.5 0.295 2-ø2.3 ø0.091 ℓ = 36 to 37 1.417 to 1.457 Note: In order to obtain a ø0.5 mm ø0.02 in spot, it is necessary to keep M4 × 0.7 0.028 internal “ ”, in the above gure, within the thread, 6 0.236 deep speci ed range. Material: Enclosure ........... Aluminum (Black ALMITE) Lens ................... Glass M4 × 0.7 0.028 internal thread, 6 0.236 deep Material: Enclosure ........... Aluminum (Black ALMITE) Lens ................... Glass 53 DIMENSIONS (Unit: mm in) Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the ampli ers. The CAD data in the dimensions can be downloaded from our website. Finest spot lens (Optional) FX-MR3 6.3 0.248 Mounting drawing with FD-EG30 15 0.591 ℓ = 27.5 1.083 4 0.157 5 0.197 ø4 ø0.157 Zoom lens (Optional) FX-MR5 ø5 ø0.197 lens 3.3 0.130 &KRRVH by model &KRRVH E\VKDSH application 8 0.315 3 0.118 2.5 0.098 4.5 0.177 M3 × 0.5 0.020 internal thread 2-M3 × 0.5 0.020 thru-hole threads Material: Enclosure ........... Aluminum (Black ALMITE) Lens ................... Glass Material: Enclosure ........... PBT (Black) Lens ................... Glass Viewing QHZPRGHOV 7 0.276 Knurled Note: When inserting the ber, insert fully till it stops. Tough Fiber Fiber Selection Guide 10.3 0.406 20.3 0.799 New product introduction M4 × 0.7 0.028 internal thread, 11 0.433 deep 3.15 0.124 )LEHUV Super Quality NT-FX-MR5 (exclusive nut) is attached. Threaded Type Finest spot lens (Optional) FX-MR6 Side-view lens (Optional) FX-SV1 Sleeve Mounting drawing with FD-EG31 ø4 ø0.157 Flat Type Rod prism Flat knurl M3 × 0.5 0.020 ø4 ø0.157 ø5 ø0.197 16 0.630 Small Spot Narrow Beam M2.6 × 0.45 0.018 internal thread, 3 0.118 deep 5 0.197 Material: Enclosure ........... Aluminum (Black ALMITE) Lens ................... Acrylic Knurled surface 8 0.315 2.5 0.098 ℓ = 28.5 1.122 Lens Cylindrical Type Wide Beam Convergent Reflective Type Material: Enclosure ........... Brass (Nickel plated) Lens ................... Glass Retroreflective Type ChemicalUHVLVWDQW Note: When inserting the ber, insert fully till it stops. HeatUHVLVWDQW MS-EX3 Mounting bracket for FX-MR2 (Accessory for FX-MR2) 0.5 0.020 Fiber mounting bracket MS-FD-2 Accessory for FD-Z50HW, FR-KZ50E/KZ50H/Z50HW, FD-H30-KZ1V-S 4 0.157 9.8 0.386 4.9 0.193 Anti-slip rubber sheet (8 × 9.5 × 1) (0.315 × 0.374 × 0.039) t1.2 10 0.394 16 0.630 23 0.906 Liquid Leak / Liquid Detection 2-M3 × 0.5 0.020 8.7 0.343 0.8 8.5 0.031 0.335 2-ø3.5 ø0.138 mounting holes VacuumUHVLVWDQW 4 0.157 12.2 0.480 10.2 0.402 5 0.197 6 0.236 3.3 0.130 4 0.157 3.3 0.130 7 0.276 Fiber 2SWLRQV Fiber 'LPHQVLRQV Thru-beam Type Material: Stainless steel (SUS304) 14 0.551 Material: Brass (Nickel plated) 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type Fiber mounting bracket MS-FD-3 Re ector for FR-KZ50E/KZ50H RF-003 Accessory for FT-KV40/FT-KV40W (11) (0.433) 3.2 0.126 3.3 0.130 C1 C0.039 R2.5 R0.098 Accessory for FR-KZ50E/KZ50H 10.1 5 0.398 0.197 3.3 0.130 3-R0.5 R0.020 5 0.197 10 0.394 5 0.197 R1.6 R0.063 (88°) (90°) 19 0.748 3.2 0.126 3.9 0.154 (88°) (90°) 2WKHUV Cover [Stainless steel (SUS304)] 10.6 0.417 1.1 0.043 10 0.394 (Effective reflector width) 10 0.394 19 28 (Effective reflector width) 0.748 1.102 $PSOLILHUV FX-500 VHULHV FX-100 VHULHV 1 0.039 3.2 0.126 4.3 0.169 Reflector (Norbornene resin) INDEX 3.5 0.138 0.4 0.016 6.9 0.272 6.9 0.272 Material: Stainless steel (SUS304) (DUOLHUPRGHOV FRPSDULVRQ table 54 New product introduction Tough Fiber DIMENSIONS (Unit: mm in) Refer to the FX-500 series (p.64), FX-100 series (p.74) for dimensions of the ampli ers. The CAD data in the dimensions can be downloaded from our website. Re ector (Optional) RF-210 33.3 1.311 Fiber Selection Guide 35.3 1.390 12.8 0.504 &KRRVH by model &KRRVH E\VKDSH application M3 nut mounting holes (for mounting at the back) Reflector 11 0.433 Viewing QHZPRGHOV 34.3 42.3 1.350 1.665 8 0.315 )LEHUV 25 0.984 10 0.394 2-ø3.4 ø0.134 holes, 6 0.236 deep (for mounting at the back) 2-M3 nut mounting holes (for mounting at the side) Material: Acrylic (Re ector) ABS (Base) Two M3 (length 8 mm 0.315 in) screws with washers and two nuts are attached. Flat Type Re ector (Optional) RF-230 Narrow Beam 50.3 1.980 Wide Beam Convergent Reflective Type Retroreflective Type ChemicalUHVLVWDQW 49.3 59.3 1.941 2.335 (30) (1.181) HeatUHVLVWDQW VacuumUHVLVWDQW Liquid Leak / Liquid Detection 10 0.394 5 0.197 40 1.575 Material: Acrylic (Re ector) ABS (Base) Fiber 2SWLRQV Fiber 'LPHQVLRQV Thru-beam Type 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type 2WKHUV $PSOLILHUV FX-500 VHULHV FX-100 VHULHV INDEX (DUOLHUPRGHOV FRPSDULVRQ table 3.3 0.130 25 0.984 Material: Acrylic (Re ector) ABS (Base) Threaded Type Small Spot 4 0.157 2-ø3.4 ø0.134 thru-holes (for mounting at the side) Super Quality Sleeve (21) (0.827) Base 3.2 0.126 Cylindrical Type Re ector (Optional) RF-220 3.3 0.130 2-ø4.6 ø0.181 mounting holes 8.3 0.327 2-ø3.6 ø0.142 mounting holes 8.3 0.327 55 56 Digital Fiber Sensor 1HZSURGXFW introduction Tough Fiber Fiber Selection Guide FX-500 SERIES At the industry’s leading edge Choose by model Choose E\VKDSH DSSOLFDWLRQ Conforming to EMC Directive Viewing new models Listing Certified Fibers 6XSHU Quality Threaded 7\SH Cylindrical 7\SH Sleeve Flat 7\SH Small 6SRW Narroe Beam Wide Beam Convergent 5HIOHFWLYH 7\SH 5HWURUHIOHFWLYH 7\SH Chemicalresistant Heatresistant Vacuumresistant +LJKVWDELOLW\'HFUHDVHWKHYDULDWLRQDPRQJ¿EHUVHQVRUV When the FX-500 series is used together with our super quality ber, the incident light intensity variation among units is decreased to only 1/4 of that of conventional models. By being close to absolute values instead of modi ed digital values, changes in detection that could not be found in the past can now be monitored. Super quality fiber FX-500 series Incident light intensity /LTXLG/HDN Liquid Detection Fiber 2SWLRQV 1/4 Unify the threshold value Fiber Dimensions Thru-beam 7\SH Incident light intensities are stable. Threshold Incident light value intensity Previous amplifier Can control by using just one threshold value. incident light intensity variation [from previous] Threshold Incident light value intensity Incident light intensity L D MODE 5HWURUHÀHFWLYH 7\SH Large variation in incident light intensity. Variation in the threshold value L D MODE 5HÀHFWLYH 7\SH L Requires setting different threshold values for each sensor. D MODE Others L D MODE $PSOLILHUV FX-500 series FX-100 series H y p e r 0D[ȝVUHVSRQVHWLPH HYPRPRGHLQFRUSRUDWHG Performing minute object detection when using a small diameter ber is now possible with a high response time and longer sensing range. FX-500 in combination with small diameter bers which can handle challenging detections, allows super long sensing range. INDEX 7RXJK FX-500 FD-41 Previous FD-NFM2 HYPR mode Earlier models FRPSDULVRQ table FX-301 (LONG mode) Note: When using FD-NFM2. Max. 5.7 times! (Note) longer than the previous model 57 $GLIIHUHQWDFFXUDF\6KDUSGHWHFWLRQZLWKVXSSUHVVHGK\VWHUHVLV FX-500 with its accurate detection catches fractional difference in light intensity, ful lling high precision and lowhysteresis applications. 1HZSURGXFW introduction Highly accurate detection while avoiding saturation H-01 mode Long range detection of small objects with small difference in light intensity H-02 mode Tough Fiber Fiber Selection Guide Choose by model Choose E\VKDSH DSSOLFDWLRQ Retroreflective type fiber Viewing new models Fibers FT-A11 6XSHU Quality Reflector Threaded 7\SH Display adjustment setting ,QFLGHQWOLJKWLQWHQVLW\WRDFRPSUHKHQVLEOHYDOXH 'LVSOD\DGMXVWPHQWVHWWLQJ Cylindrical 7\SH Sleeve The display can be corrected to show any value using the display adjustment settings. It is effective in using multiple units with the same condition. Flat 7\SH Current incident light intensity Unify incident light intensity into any value Small 6SRW Narroe Beam %XLOWLQORJLFIXQFWLRQV1R3/&QHFHVVDU\VDYLQJPDWHULDODQGSURJUDPPLQJFRVWV Wide Beam /RJLFDOFDOFXODWLRQIXQFWLRQV Convergent 5HIOHFWLYH 7\SH Three logical calculations (AND, OR, XOR), are selectable using Output 1 of multiple FX-500 series ampli ers. A PLC is not required which helps to reduce material and programming and costs. (TXLSSHGZLWKW\SHVWLPHUV Calculation of two neighboring amplifiers Lower side Output 1 Calculation result output Upper side Output 1 Normal operation Time chart 5HWURUHIOHFWLYH 7\SH For L-ON Beamreceived Beaminterrupted ON OFF Sensing condition T1 ON-delay Communication direction (Up to 12 units) Calculation of two outputs in one amplifier FX-502(P) / 505(P)-C2 ONE-SHOT Detection ber Output 1 Calculation result output Output 2 Normal output operation Calculation of one amplifier and external input T1 OFF-delay T1 T1 ON OFF T1 ON-delay % OFF-delay T1 ON-delay % ONE-SHOT T1 ON OFF T2 T2 Chemicalresistant Heatresistant Vacuumresistant /LTXLG/HDN Liquid Detection ON OFF ON OFF Fiber 2SWLRQV FX-502(P) / 505(P)-C2 Timer period: 0.05 ms to 32 s "!"!


$
%
$

$
%
  timers. External input (sensor, contact, PLC, etc.) Synchronization ber Fiber Dimensions Output 1 Calculation result output Thru-beam 7\SH 6PRRWKVHWXSFKDQJHVE\GDWDEDQNV Setup conditions can be saved and loaded to make setup changes easy at worksite that manufactures multiple models. $QRSWLFDOFRPPXQLFDWLRQIXQFWLRQDOORZV VHQVRUVWREHDGMXVWHGVLPXOWDQHRXVO\ The optical communication function allows the data that is currently set to be copied and saved all at once for all ampli ers connected together from the right side. 5HWURUHÀHFWLYH 7\SH 5HÀHFWLYH 7\SH Others $PSOLILHUV FX-500 series Single copy & save operation for all amplifiers Optical communication window 5HPRWHFRQWUROLPSURYHVZRUN );3 );3& HI¿FLHQF\E\H[WHUQDOLQSXW Various types of functions, such as teaching and data load/save, can be performed by PLC external signal, using external input*. * The FX-502 (P) switches Output 2 for an external input. FX-100 series INDEX 1RQHHGWRVSHFLI\DPDLQXQLWRUVXEXQLW ust use a main cable or a sub cable to distinguish the two. This reduces the costs of inventory management. Earlier models FRPSDULVRQ table 58 &KRRVH E\PRGHO &KRRVH E\VKDSH DSSOLFDWLRQ 9LHZLQJ QHZPRGHOV )LEHUV 6XSHU 4XDOLW\ 7KUHDGHG 7\SH Type Appearance Emitting element Model No. Standard type )LEHU 6HOHFWLRQ *XLGH $PSOL¿HUV Quick-connection cable is not supplied with FX-501(P) and FX-502(P). Please order it separately. FX-501 NPN open-collector transistor FX-501P PNP open-collector transistor NPN open-collector transistor 2 outputs FX-502 Red LED FX-502P PNP open-collector transistor 2 outputs FX-505-C2 NPN open-collector transistor 2 outputs, analog output FX-505P-C2 PNP open-collector transistor 2 outputs, analog output &\OLQGULFDO 7\SH 6OHHYH )ODW 7\SH 6PDOO 6SRW &RQYHUJHQW 5HIOHFWLYH 7\SH 5HWURUHIOHFWLYH 7\SH &KHPLFDO UHVLVWDQW /LTXLG/HDN /LTXLG'HWHFWLRQ )LEHU 2SWLRQV 7KUXEHDP 7\SH 5HWURUHÀHFWLYH 7\SH 5HÀHFWLYH 7\SH Model No. CN-73-C1 Main cable (3-core) Sub cable (1-core) Description CN-73-C5 CN-71-C1 Length: 1 m 3.281 ft CN-71-C2 Length: 2 m 6.562 ft CN-71-C5 0.15 mm 1-core cabtyre cable, with connector on one end Cable outer diameter: ø3.0 mm ø0.118 in Length: 5 m 16.404 ft Connectable to a main cable up to 15 cables. 2 (DUOLHUPRGHOV FRPSDULVRQ WDEOH CN-71-CƑ 0DLQFDEOH Type Model No. CN-74-C1 Main cable (4-core) CN-74-C2 CN-72-C1 Sub cable (2-core) CN-72-C2 CN-72-C5 Description CN-74-CƑ Length: 1 m 3.281 ft 0.15 mm2 4-core cabtyre cable, with connector Length: 2 m 6.562 ft on one end Cable outer diameter: ø3.0 mm ø0.118 in Length: 5 m 16.404 ft Length: 1 m 3.281 ft 0.15 mm2 2-core cabtyre cable, with connector on one end Length: 2 m 6.562 ft Cable outer diameter: ø3.0 mm ø0.118 in Length: 5 m 16.404 ft Connectable to a main cable up to 15 cables. 6XEFDEOH CN-72-CƑ (QGSODWHV End plates are not supplied with the ampli er. Please order them separately when the ampli ers are mounted in cascade. Model No. $PSOLILHUV INDEX 6XEFDEOH )RU);(P) Quick-connection cable is not supplied with the ampli er. Please order it separately. Appearance FX-100 VHULHV CN-73-CƑ Length: 1 m 3.281 ft 0.15 mm2 3-core cabtyre cable, with connector Length: 2 m 6.562 ft on one end Cable outer diameter: ø3.0 mm ø0.118 in Length: 5 m 16.404 ft CN-73-C2 2WKHUV FX-500 VHULHV Incorporated 0DLQFDEOH Type CN-74-C5 )LEHU 'LPHQVLRQV Incorporated (Switchable with Output 2) )RU);(P) Quick-connection cable is not supplied with the ampli er. Please order it separately. +HDW UHVLVWDQW 9DFXXP UHVLVWDQW External input 4XLFNFRQQHFWLRQFDEOHV 1DUURH %HDP :LGH %HDP Output – 2-output type 7RXJK )LEHU ORDER GUIDE Cable type 1HZSURGXFW LQWURGXFWLRQ MS-DIN-E Description When cascading multiple ampli ers, or when it moves depending on the way it is installed on a DIN rail, these end plates clamp ampli ers into place on both sides. Make sure to use end plates when cascading multiple ampli ers together. Two pcs. per set 59 OPTIONS 1HZSURGXFW LQWURGXFWLRQ $PSOL¿HUPRXQWLQJEUDFNHW Designation Model No. Ampli er mounting bracket MS-DIN-2 Description Mounting bracket for ampli er 7RXJK )LEHU MS-DIN-2 )LEHU 6HOHFWLRQ *XLGH &KRRVH E\PRGHO $FFHVVRU\ &KRRVH E\VKDSH DSSOLFDWLRQ Communication window seal 9LHZLQJ QHZPRGHOV FX-MB1 (Ampli er protection seal) 10 sets of 2 communication window seals and 1 connector seal Connector seal )LEHUV 6XSHU 4XDOLW\ 7KUHDGHG 7\SH &\OLQGULFDO 7\SH 6OHHYH )ODW 7\SH 6PDOO 6SRW 1DUURH %HDP :LGH %HDP &RQYHUJHQW 5HIOHFWLYH 7\SH 5HWURUHIOHFWLYH 7\SH &KHPLFDO UHVLVWDQW +HDW UHVLVWDQW 9DFXXP UHVLVWDQW /LTXLG/HDN /LTXLG'HWHFWLRQ )LEHU 2SWLRQV )LEHU 'LPHQVLRQV 7KUXEHDP 7\SH 5HWURUHÀHFWLYH 7\SH 5HÀHFWLYH 7\SH 2WKHUV $PSOLILHUV FX-500 VHULHV FX-100 VHULHV INDEX (DUOLHUPRGHOV FRPSDULVRQ WDEOH 60 1HZSURGXFW LQWURGXFWLRQ SPECIFICATIONS 7RXJK )LEHU &KRRVH E\PRGHO &KRRVH E\VKDSH DSSOLFDWLRQ 9LHZLQJ QHZPRGHOV Model No. )LEHU 6HOHFWLRQ *XLGH Type Item 2-output type Cable type (Analog output type) NPN output FX-501 FX-502 FX-505-C2 PNP output FX-501P FX-502P FX-505P-C2 +10 12 to 24 V DC-15 % Ripple P-P 10 % or less Supply voltage Power consumption Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage, excluding analog output of cable type) ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage, excluding analog output of cable type) Output (2-output type and cable type: Output 1, Output 2) NPN open-collector transistor PNP open-collector transistor Maximum sink current: 100 mA Maximum source current: 100 mA (2-output type and cable type are 50 mA) (Note 2) (2-output type and cable type are 50 mA) (Note 2) Applied voltage: 30 V DC or less (between output and 0 V) Applied voltage: 30 V DC or less (between output and +V) Residual voltage: 2 V or less (Note 3) (at maximum sink current) Residual voltage: 2 V or less (Note 3) (at maximum source current) )LEHUV Output points 6XSHU 4XDOLW\ 7KUHDGHG 7\SH &\OLQGULFDO 7\SH Standard type 1 point 2 points Output operation Switchable either Light-ON or Dark-ON by L/D mode Short-circuit protection Incorporated Response time H-SP: 25 s or less, FAST: 60 s or less, STD: 250 s or less, LONG: 2 ms or less, U-LG: 4 ms or less, HYPR: 24 ms or less, selectable Analog output (Cable type only) Output current: 4 to 20 mA approx. [H-SP, FAST STD: At 0 to 4,000 digits, LONG: At 0 to 8,000 digits (Note 4)], Response time: 2 ms or less, Zero point: Within 4 mA ±1 % F.S., Span: Within 16 mA ±5 % F.S., Linearity: Within ±3 % F.S., Load resistance: 0 to 250 External input (2-output type only, switchable with Output 2) – NPN non-contact input Signal condition High: +8 V to +V DC or Open Low: 0 to +1.2 V DC (at 0.5 mA source current) Input impedance: 10 k approx. &RQYHUJHQW 5HIOHFWLYH 7\SH Possible external input function – 5HWURUHIOHFWLYH 7\SH Sensitivity setting &KHPLFDO UHVLVWDQW Incident light intensity display range 6OHHYH )ODW 7\SH 6PDOO 6SRW 1DUURH %HDP :LGH %HDP H-SP / FAST / STD: 0 to 4,000, LONG: 0 to 8,000, U-LG / HYPR: 0 to 9,999 Incorporated with variable OFF-delay / ON-delay /ONE SHOT / ON-delay OFF-delay / ON-delay ONE SHOT timer, switchable either effective or ineffective Timer function /LTXLG/HDN /LTXLG'HWHFWLRQ Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode] Interference prevention function Incorporated (Note 5), selectable either automatic interference prevention or different frequency Various settings 7KUXEHDP 7\SH Protection 5HÀHFWLYH 7\SH 2WKHUV Incorporated with variable OFF-delay / ON-delay /ONE SHOT timer, switchable either effective or ineffective Light emitting amount selection function )LEHU 'LPHQVLRQV 5HWURUHÀHFWLYH 7\SH Incorporated with variable OFF-delay / ON-delay /ONE SHOT / ON-delay OFF-delay / ON-delay ONE SHOT timer, switchable either effective or ineffective Timer range “ms”: 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx., Timer range “sec.”: 0.5 s approx., 1 to 32 s approx., 1 s approx., Timer range “1/10 ms”: 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx., each output is set individually Timer period )LEHU 2SWLRQV Emission halt / Teaching (Full-auto, Limit, 2-point) / Logic operation setting / Copy lock / Display adjustment / Data bank load / Data bank save, selectable 2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment +HDW UHVLVWDQW 9DFXXP UHVLVWDQW PNP non-contact input Signal condition High: +4 V to +V DC (at 3 mA sink current) Low: 0 to +0.6 V DC or Open Input impedance: 10 k approx. Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold tracking setting, etc. IP40 (IEC) -10 to +55 °C +14 to +131 °F [If 4 to 7 units are mounted in cascade: -10 to +50 °C +14 to +122 °F or if 8 to 16 units (cable type: 8 to 12 units) are mounted in cascade: -10 to +45 °C +14 to +113 °F] (No dew condensation or icing allowed), Storage: -20 to +70 °C -4 to +158 °F Ambient temperature Emitting element (modulated) Red LED (Peak emission wavelength: 643 nm 0.025 mil) Material Enclosure, Case cover: Polycarbonate, Switch: TPEE Cable – 0.15 mm2 6-core cabtyre cable, 2 m 6.562 ft long $PSOLILHUV Cable extension – Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (however, supply voltage 12 V DC) FX-500 VHULHV Weight Net weight: 15 g approx., Gross weight: 70 g approx. Net weight: 60 g approx., Gross weight: 100 g approx. FX-100 VHULHV INDEX Accessory FX-MB1 (Ampli er protection seal): 1 set Notes: 1) Where measurement conditions have not been speci ed precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F. 2) 50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type) 3) In case of using the quick-connection cable (cable length 5 m 16.404 ft) (optional). 4) If display adjustment was conducted, it is not in this range. 5) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below. Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units. Number of sensor heads mountable closely (Unit: set) (DUOLHUPRGHOV FRPSDULVRQ WDEOH Response time H-SP FAST STD LONG U-LG HYPR IP-1 0 2 4 8 8 12 61 ,2&,5&8,7$1':,5,1*',$*5$06 1HZSURGXFW LQWURGXFWLRQ NPN output type FX-501 ,2FLUFXLWGLDJUDP :LULQJGLDJUDP Terminal No. Color code of quick-connection cable Color code of quick-connection cable )LEHU 6HOHFWLRQ *XLGH Brown (Note 1) (Brown) +V (Note 1) Sensor circuit 1 Load Load + 2 12 to 24 V DC +10   % – 100 mA max. (Note 2) 3 – -15 12 to 24 V DC +10   % -15 Blue (Note 1) Note: The quick-connection sub cable does not have brown lead wire and blue lead wire. (Blue) 0 V (Note 1) Internal circuit + Black (Black) Output User’s circuit Notes: 1) The quick-connection sub cable does not have +V (brown) and 0 V (blue). The power is supplied from the connector of the main cable. 2) 50 mA max., if ve ampli ers, or more, are connected together. )LEHUV 2 Output 6XSHU 4XDOLW\ 3 0V 7KUHDGHG 7\SH :LULQJGLDJUDP Color code of quick-connection cable Sensor circuit 2 3 12 to 24 V DC +10   % – (Black) Output – Load Blue (Note 1) -15 Load (Blue) 0 V (Note 1) Internal circuit + Black + 12 to 24 V DC +10   % -15 Note: The quick-connection sub cable does not have brown lead wire and blue lead wire. User’s circuit Notes: 1) The quick-connection sub cable does not have +V (brown) and 0 V (blue). The power is supplied from the connector of the main cable. 2) 50 mA max., if ve ampli ers, or more, are connected together. 7HUPLQDODUUDJHPHQWGLDJUDP 1 +V 2 Output 3 0V :LULQJGLDJUDP 6PDOO 6SRW 1DUURH %HDP :LGH %HDP &RQYHUJHQW 5HIOHFWLYH 7\SH &KHPLFDO UHVLVWDQW +HDW UHVLVWDQW NPN output type Terminal No. 6OHHYH 5HWURUHIOHFWLYH 7\SH FX-502 ,2FLUFXLWGLDJUDP &\OLQGULFDO 7\SH )ODW 7\SH Brown (Note 1) (Brown) +V (Note 1) 100 mA max. (Note 2) 9LHZLQJ QHZPRGHOV +V Color code of quick-connection cable 1 &KRRVH E\VKDSH DSSOLFDWLRQ 1 PNP output type Terminal No. &KRRVH E\PRGHO 7HUPLQDODUUDJHPHQWGLDJUDP FX-501P ,2FLUFXLWGLDJUDP 7RXJK )LEHU Color code of quick-connection cable 9DFXXP UHVLVWDQW /LTXLG/HDN /LTXLG'HWHFWLRQ Color code of quick-connection cable Brown (Note 1) (Brown) +V (Note 1) Sensor circuit 1 4 2 (White) Output 2 / External input 50 mA max. (Note 2) (Black) Output 1 50 mA max. (Note 2) 3 White Load Load + – External input + – Black 12 to 24 V DC +10   % -15 Blue (Note 1) 12 to 24 V DC +10   % User’s circuit 7HUPLQDODUUDJHPHQWGLDJUDP Notes: 1) The quick-connection sub cable does not have +V (brown) and 0 V (blue). The power is supplied from the connector of the main cable. 2) 25 mA max., if ve ampli ers, or more, are connected together. 1 +V 2 Output 1 3 0V )LEHU 2SWLRQV -15 External input Note: The quick-connection sub cable does not have brown lead wire and blue lead wire. (Blue) 0 V (Note 1) Internal circuit Load Load )LEHU 'LPHQVLRQV 7KUXEHDP 7\SH 5HWURUHÀHFWLYH 7\SH 4 Output 2 / External input 5HÀHFWLYH 7\SH 2WKHUV PNP output type FX-502P ,2FLUFXLWGLDJUDP :LULQJGLDJUDP Terminal No. Color code of quick-connection cable Brown (Note 1) (Brown) +V (Note 1) 1 Sensor circuit 50 mA max. (Note 2) 2 4 (Black) Output 1 50 mA max. (Note 2) (White) Output 2 / External input External input + – Black 12 to 24 V DC +10   % -15 Load Load 3 Internal circuit Color code of quick-connection cable (Blue) 0 V (Note 1) User’s circuit Notes: 1) The quick-connection sub cable does not have +V (brown) and 0 V (blue). The power is supplied from the connector of the main cable. 2) 25 mA max., if ve ampli ers, or more, are connected together. White Blue Load Load (Note 1) External input + 12 to 24 V DC +10   – % -15 Note: The quick-connection sub cable does not have brown lead wire and blue lead wire. $PSOLILHUV FX-500 VHULHV FX-100 VHULHV INDEX 7HUPLQDODUUDJHPHQWGLDJUDP 1 +V 2 Output 1 3 0V (DUOLHUPRGHOV FRPSDULVRQ WDEOH 4 Output 2 / External input 62 ,2&,5&8,7$1':,5,1*',$*5$06 1HZSURGXFW LQWURGXFWLRQ 7RXJK )LEHU NPN output type FX-505-C2 ,2FLUFXLWGLDJUDP :LULQJGLDJUDP Color code (Brown) +V &KRRVH E\PRGHO (Pink) External input &KRRVH E\VKDSH DSSOLFDWLRQ 9LHZLQJ QHZPRGHOV Sensor circuit )LEHU 6HOHFWLRQ *XLGH Brown Load Load (Black) Output 1 + – (White) Output 2 Black 12 to 24 V DC 10 % 15 Load Load White + Pink – (Blue) 0 V (Gray) Analog output (4 to 20 mA) Blue Load (0 to 250 Ω) Load (0 to 250 Ω) Gray Internal circuit )LEHUV 12 to 24 V DC 10 % 15 User’s circuit 6XSHU 4XDOLW\ 7KUHDGHG 7\SH &\OLQGULFDO 7\SH 6OHHYH ,2FLUFXLWGLDJUDP )ODW 7\SH 1DUURH %HDP :LGH %HDP &KHPLFDO UHVLVWDQW +HDW UHVLVWDQW 9DFXXP UHVLVWDQW /LTXLG/HDN /LTXLG'HWHFWLRQ )LEHU 2SWLRQV )LEHU 'LPHQVLRQV 7KUXEHDP 7\SH 5HWURUHÀHFWLYH 7\SH 5HÀHFWLYH 7\SH 2WKHUV $PSOLILHUV FX-500 VHULHV FX-100 VHULHV INDEX (DUOLHUPRGHOV FRPSDULVRQ WDEOH Color code Brown (Black) Output 1 + (White) Output 2 Load (Pink) External input &RQYHUJHQW 5HIOHFWLYH 7\SH 5HWURUHIOHFWLYH 7\SH :LULQJGLDJUDP (Brown) +V Sensor circuit 6PDOO 6SRW PNP output type FX-505P-C2 (Blue) 0 V – 12 to 24 V DC 10 % 15 Black Load (0 to 250 Ω) Blue Gray Internal circuit User’s circuit + White Load (Gray) Analog output (4 to 20 mA) Pink Load – 12 to 24 V DC 10 % 15 Load Load (0 to 250 Ω) 63 PRECAUTIONS FOR PROPER USE Never use this product as a sensing device for personnel protection. In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. :LULQJ Make sure that the power supply is OFF while adding or removing the ampli ers. Note that if a voltage exceeding the reted range is applied, or if an AC power supply is directly connected, the product may get burnt or damaged. Note that short-circuit of the load or wrong wiring may burn or damage the product. Do not run the wires together with high-voltage lines or power lines, or put them in the same raceway. This can cause malfunction due to induction. Verify that the supply voltage variation is within the rating. If power is supplied from a commercial switching regulator, ensure that the frame ground (F.G.) terminal of the power supply is connected to an actual ground. In case noise generating equipment (switching regulator, inverter motor, etc.) is used in the vicinity of this product, connect the frame ground (F.G.) terminal of the equipment to an actual ground. Make sure to use the quick-connection cable (optional) for the connection of the controller. Extension up to total 100 m 328.084 ft is possible with 0.3 mm2 or more, cable. However, in order to reduce noise, make the wiring as short as possible. Make sure that stress by forcible bending or pulling is not applied to the sensor cable joint and ber cable. Refer to the “PRO mode operation manual” on our website for details. 2WKHUV Our products have been developed / produced for industrial use only. The speci cation may not be satis ed in a strong magnetic eld. The ultra long distance (U-LG, HYPR) mode is more likely to be affected by extraneous noise since the sensitivity of that is higher than the other modes. Make sure to check the environment before use. Do not use during the initial transient time (H-SP, FAST, STD: 0.5 sec., LONG, U-LG, HYPR: 1 sec.) after the power supply is switched ON. These sensors are only for indoor use. Avoid dust, dirt, and steam. Make sure that the product does not come in contact with oil, grease, organic solvents such as thinner, etc., strong acid or alkaline. This product cannot be used in an environment containing in ammable or explosive gases. Never disassemble or modify this product. This product adopts EEPROM. Settings cannot be done 100 thousand times or more because of the EEPROM's lifetime. 1HZSURGXFW LQWURGXFWLRQ 7RXJK )LEHU )LEHU 6HOHFWLRQ *XLGH &KRRVH E\PRGHO &KRRVH E\VKDSH DSSOLFDWLRQ 9LHZLQJ QHZPRGHOV )LEHUV 6XSHU 4XDOLW\ 7KUHDGHG 7\SH &\OLQGULFDO 7\SH 6OHHYH )ODW 7\SH 6PDOO 6SRW 1DUURH %HDP :LGH %HDP &RQYHUJHQW 5HIOHFWLYH 7\SH 5HWURUHIOHFWLYH 7\SH &KHPLFDO UHVLVWDQW +HDW UHVLVWDQW 9DFXXP UHVLVWDQW /LTXLG/HDN /LTXLG'HWHFWLRQ )LEHU 2SWLRQV )LEHU 'LPHQVLRQV 7KUXEHDP 7\SH 5HWURUHÀHFWLYH 7\SH 5HÀHFWLYH 7\SH 2WKHUV $PSOLILHUV FX-500 VHULHV FX-100 VHULHV INDEX (DUOLHUPRGHOV FRPSDULVRQ WDEOH 64 1HZSURGXFW LQWURGXFWLRQ 7RXJK )LEHU ',0(16,2168QLWPPin) FX-501(P) &KRRVH E\PRGHO &KRRVH E\VKDSH DSSOLFDWLRQ Communication window 10 0.394 )ODW 7\SH 6PDOO 6SRW 27.8 1.094 22.7 0.894 62.5 2.461 2 0.079 10.4 0.409 Digital display (Green / Red) 1.1 0.043 7 0.276 10.5 0.413 24 0.945 36.5 1.437 3 75 2.953 0.118 Suitable for 35 mm 1.378 in width DIN rail Notes: 1) 2) 3) 4) 8.2 0.323 Output 2 operation indicator (Orange) 10 Beam- 0.394 emitting part Beamreceiving part 5.7 0.224 &\OLQGULFDO 7\SH 6OHHYH MODE key 32 1.260 28 20.8 1.102 0.819 7 0.276 Beamreceiving part Ampli er FX-505P-C2 MODE key Output 1 operation indicator (Orange) Setting switch (Note 4) )LEHUV FX-505-C2 Output selection indicator (Yellow) Output 2 operation indicator (Orange) (Note 1) Beamemitting part 7KUHDGHG 7\SH 8.2 0.323 10.4 62.5 2.461 0.409 2 0.079 Digital display (Green / Red) Output 1 operation indicator (Orange) (Note 2) 9LHZLQJ QHZPRGHOV 6XSHU 4XDOLW\ Ampli er FX-502(P) Output selection indicator (Yellow) (Note 1) )LEHU 6HOHFWLRQ *XLGH The CAD data in the dimensions can be downloaded from our website. Communication window 32 28 1.260 1.102 20.8 7 0.276 0.819 3 0.118 ø3.7 ø0.146 cable 2 m 6.562 ft (Note) 10.5 0.413 9.2 0.362 5.7 0.224 3.95 0.156 (Note 3) FX-502(P) only FX-501(P): Operation indicator FX-501(P): 3-pin, FX-502(P): 4-pin The shape of setting switch will be changed from production at the end of November, 2011. Please see drawing below. 27.8 1.094 22.7 0.894 7 0.276 Setting switch (Note) 24 0.945 36.5 1.437 75 2.953 Suitable for 35 mm 1.378 in width DIN rail 3.95 0.156 2.8 0.110 Note: The shape of setting switch and cable will be changed from production at the end of November, 2011. Please see drawing below. 1DUURH %HDP :LGH %HDP &RQYHUJHQW 5HIOHFWLYH 7\SH 5HWURUHIOHFWLYH 7\SH &KHPLFDO UHVLVWDQW +HDW UHVLVWDQW $IWHUWKHPRGL¿FDWLRQ Output selection indicator (Yellow) (Note 1) Setting switch Communication window 10 Beam- 0.394 emitting part )LEHU 2SWLRQV Beamreceiving part 5HWURUHÀHFWLYH 7\SH 5HÀHFWLYH 7\SH 2WKHUV $PSOLILHUV FX-500 VHULHV FX-100 VHULHV INDEX (DUOLHUPRGHOV FRPSDULVRQ WDEOH MODE key Output 2 operation indicator (Orange) (Note 1) /LTXLG/HDN /LTXLG'HWHFWLRQ 7KUXEHDP 7\SH Output selection indicator (Yellow) 8.2 0.323 62.5 2.461 2 0.079 9.95 0.392 MODE key Output 1 operation indicator (Orange) Output 1 operation indicator (Orange) (Note 2) 9DFXXP UHVLVWDQW )LEHU 'LPHQVLRQV 8.2 0.323 $IWHUWKHPRGL¿FDWLRQ 9.95 62.5 2.461 0.392 2 0.079 Digital display (Green / Red) 27.8 1.094 22.7 0.894 32 1.260 28 20.8 1.102 0.819 7 0.276 Notes: 1) FX-502(P) only 2) FX-501(P): Operation indicator 3) FX-501(P): 3-pin, FX-502(P): 4-pin Digital display (Green / Red) 1.1 0.043 7 0.276 10.5 0.413 5.7 0.224 24 0.945 36.5 1.437 3 75 2.953 0.118 Suitable for 35 mm 1.378 in width DIN rail Output 2 operation indicator (Orange) 3.95 0.156 (Note 3) 10 Beam- 0.394 emitting part Beamreceiving part Communication window 27.8 1.094 22.7 0.894 7 0.276 32 28 1.260 1.102 20.8 7 0.276 0.819 ø4 ø0.157 6 core cable 2 m 6.562 ft 10.5 0.413 9.2 0.362 5.7 0.224 3 0.118 Setting switch 24 0.945 36.5 1.437 75 2.953 Suitable for 35 mm 1.378 in width DIN rail 3.95 0.156 2.8 0.110 65 ',0(16,2168QLWPPin) CN-73-CƑ The CAD data in the dimensions can be downloaded from our website. Main cable (Optional) CN-74-CƑ Length L Model No. CN-71-CƑ Sub cable (Optional) CN-72-CƑ 1HZSURGXFW LQWURGXFWLRQ 7RXJK )LEHU Length L Length L L (Note 2) &1& 1,000 39.370 &1& 2,000 78.740 &1& 5,000 196.850 50 1.969 ø3 ø0.118 cable ( 14 0.551 2.54 0.100 ) 2.9 (0.114 ) 10 0.394 6 0.236 2.54 0.100 Notes: 1) CN-74-C only 2) CN-73-C : 3-core 7 0.276 10 0.394 13.6 0.535 3 0.118 &1& 39.370 &1& 2,000 78.740 &1& 5,000 196.850 (Note 2) 14 (0.551 ) 3 0.118 ( 2.9 0.114 ) 10 0.394 6 0.236 ( ) 12 10.5 (0.472 ) 0.413 2.54 0.100 2.65 0.104 )LEHU 6HOHFWLRQ *XLGH &KRRVH E\PRGHO ø3 ø0.118 cable 2.54 0.100 7.2 0.283 50 1.969 L 1,000 (Note 1) 0.2 0.008 2.65 0.104 Length L ( ) 12 10.5 (0.472 ) 0.413 (Note 1) Model No. &KRRVH E\VKDSH DSSOLFDWLRQ 9LHZLQJ QHZPRGHOV )LEHUV 0.2 0.008 Notes: 1) CN-72-C only 2) CN-71-C : 1-core 7 0.276 10 0.394 13.6 0.535 3 0.118 6XSHU 4XDOLW\ 7.2 0.283 7KUHDGHG 7\SH &\OLQGULFDO 7\SH 6OHHYH Ampli er mounting bracket (Optional) MS-DIN-2 21.6 0.850 16 0.630 5.2 0.205 End plate (Optional) MS-DIN-E 6PDOO 6SRW 2.75 0.108 3.2 0.126 1DUURH %HDP 10 0.394 8.5 0.335 3.2 0.126 0.4 0.016 ø1.8 ø0.071 7.5 0.295 4.2 0.165 5.2 0.205 35 1.378 2 0.079 2 0.079 2-ø3.2 ø0.126 holes Material: Cold rolled carbon steel (SPCC) (Uni-chrome plated) 5 0.197 27 1.063 M3 (length 18 mm 0.709 in) pan head screws 3 0.118 15 0.591 60 2.362 3 0.118 5.6 M3 square nut 0.220 24.7 0.972 t1 t 0.039 )ODW 7\SH 1.6 0.063 32 1.260 Material: Polycarbonate 4 0.157 Suitable for 35 mm 1.378 in width DIN rail :LGH %HDP &RQYHUJHQW 5HIOHFWLYH 7\SH 5HWURUHIOHFWLYH 7\SH &KHPLFDO UHVLVWDQW +HDW UHVLVWDQW 9DFXXP UHVLVWDQW /LTXLG/HDN /LTXLG'HWHFWLRQ )LEHU 2SWLRQV )LEHU 'LPHQVLRQV 7KUXEHDP 7\SH 5HWURUHÀHFWLYH 7\SH 5HÀHFWLYH 7\SH 2WKHUV $PSOLILHUV FX-500 VHULHV FX-100 VHULHV INDEX (DUOLHUPRGHOV FRPSDULVRQ WDEOH 66 Digital Fiber Sensor 1HZSURGXFW LQWURGXFWLRQ 7RXJK )LEHU )LEHU 6HOHFWLRQ *XLGH FX-100 SERIES 7DNLQJ¿EHUVHQVRUVWRWKHQH[WOHYHO &KRRVH E\PRGHO &KRRVH E\VKDSH DSSOLFDWLRQ Conforming to EMC Directive 9LHZLQJ QHZPRGHOV Listing )LEHUV 6XSHU 4XDOLW\ 7KUHDGHG 7\SH &\OLQGULFDO 7\SH 6OHHYH FX-100 series has been modi cated from uly 2011 production. The color of enclosure has been changed from white to dark gray and the protection cover has been attached. )ODW 7\SH 6PDOO 6SRW 1DUURH %HDP &RQYHUJHQW 5HIOHFWLYH 7\SH 5HWURUHIOHFWLYH 7\SH &KHPLFDO UHVLVWDQW +HDW UHVLVWDQW 6DYLQJVSDFHZLWKDZLGWKRIPP0.354 in ,PSURYHGVWDELOLW\RYHUERWKORQJWHUPV Very slim at only 9 mm 0.354 in. This is much thinner than existing ber sensors. Even if the difference is small when only using one unit, when using many units this makes a very large difference. Utilizes the standard Panasonic Electric Works SUNX digital ber sensor element “Four-chemical emitting element” for light emission. The light emission is guaranteed to be stable over long periods of time. [Stable sensing comparison] 9DFXXP UHVLVWDQW 9 mm 0.354 in /LTXLG/HDN /LTXLG'HWHFWLRQ )LEHU 2SWLRQV 7KUXEHDP 7\SH 5HWURUHÀHFWLYH 7\SH FX-100 Three-chemical emitting element Long-term stability Time 7HDFKLQJXVLQJ212))EXWWRQV )LEHU 'LPHQVLRQV Light-emitting amount :LGH %HDP SET mode Simply press the ON button when an object is present and OFF when it is not. Thru-beam type / Retroreflective type 5HÀHFWLYH 7\SH 5HVROYHVYDULDWLRQLQLQFLGHQWOLJKWLQWHQVLW\GLVSOD\ PRO mode *(7$IXQFWLRQ Even when performing the same sensing operation, there may be variances in the digital values of the ber amp. Given value can be corrected with the GETA function, so the apparent variation can be eliminated. 2WKHUV Variations in the amount of light received Object present ON Object absent OFF $PSOLILHUV FX-500 VHULHV FX-100 VHULHV Reflective type Unify at 500 using the GETA function ,1'(; (DUOLHUPRGHOV FRPSDULVRQ WDEOH Object present ON Object absent OFF 67 6WDEOHGHWHFWLRQE\ aWWHQXDWLRQIXQFWLRn SET mode If the light receiving level becomes saturated when sensing over short distances or when sensing transparent objects or minute objects, the light emitting amount can be reduced so that stable sensing can be provided without needing to change the response time. Light reduction: 3 levels plus an automatic mode 6HWWLQJFRS\IXQFWLRQWRUHGXFHPDQKRXUV PRO mode DQGKXPDQHUURU By cable wiring, the master sensor settings can be copied along with data transmissions. By synchronizing the settings on all the devices, trouble from setting errors can be prevented. Light emitting amount changed Master side Color of lead wire of attached connector cable + – (White) External input Copy SET mode Slave side 12 to 24 V DC ±10 % (Brown) +V 7KUHDGHG 7\SH &RSLDEOHVHWWLQJ Threshold value, output operation setting, timer operation setting, timer period setting, light-emitting amount selection setting (attenuation function), shift setting, ECO setting, digital display inversion setting, and threshold value margin setting (alert function) *The copy unit SC-SU1 which can copy settings in one touch is available. (optional) 0XOWLIXQFWLRQH[WHUQDOLQSXW PRO mode Settings such as emission halt, limit / auto teaching, 2-point teaching and ECO settings can be carried out via external input. Also, the threshold value can be memorized. (Brown) +V 9LHZLQJ QHZPRGHOV 6XSHU 4XDOLW\ (Blue) 0 V The emitted light and output indicator flash at the same frequency. &KRRVH E\PRGHO )LEHUV (White) External input The emission frequencies can be set separately for each unit in order to avoid interference. The emitted light ashes while setting is in progress, so that you can see at a glance which ber sensor is currently being set. )LEHU 6HOHFWLRQ *XLGH (Blue) 0 V (Black) Output );Ƒ: Interference prevention for up to 3 units );Ƒ: Interference prevention for up to 4 units 7RXJK )LEHU &KRRVH E\VKDSH DSSOLFDWLRQ (Brown) +V (Black) Output ,QWHUIHUHQFHSUHYHQWLRQIXQFWLRQ 1HZSURGXFW LQWURGXFWLRQ (OHFWULFLW\FRQVXPSWLRQVDYLQJ SRVVLELOLWLHV &\OLQGULFDO 7\SH 6OHHYH )ODW 7\SH 6PDOO 6SRW 1DUURH %HDP :LGH %HDP &RQYHUJHQW 5HIOHFWLYH 7\SH ECO After setting, if about 20 seconds go by without any key operations taking place the digital display will turn off and energy consumption is kept under 600 mW. (When illuminated it is under 720 mW) 5HWURUHIOHFWLYH 7\SH &KHPLFDO UHVLVWDQW +HDW UHVLVWDQW 9DFXXP UHVLVWDQW /LTXLG/HDN /LTXLG'HWHFWLRQ &RPPHUFLDOO\DYDLODEOHFRQQHFWRUVDUH XVHGVRWKDWOHDGWLPHDQGVSDUHSDUW QXPEHUVFDQERWKEHUHGXFHG )LEHU 2SWLRQV (Black) Output (White) External input (Blue) 0 V External input lines are equipped as standard PLC etc. The connectors used are commercially-available connectors, so that processing costs and lead time required for carrying out processing after purchase of the sensors can be greatly reduced. The same connection parts as the DP-100 series of digital pressure sensors and the PM-64 series of micro photoelectric sensors can be used. &RPPHUFLDOO\DYDLODEOHSUHVV¿WFRQQHFWRUVDUH XVHGVRWKDWWKHSURFHVVLQJFRVWVIRUFRQQHFWLRQ FDEOHVFDQEHJUHDWO\UHGXFHG )LEHU 'LPHQVLRQV 7KUXEHDP 7\SH 5HWURUHÀHFWLYH 7\SH 5HÀHFWLYH 7\SH 2WKHUV $PSOLILHUV FX-500 VHULHV Commercially-available connector FX-100 VHULHV ,1'(; (DUOLHUPRGHOV FRPSDULVRQ WDEOH 68 1HZSURGXFW LQWURGXFWLRQ 7RXJK )LEHU ORDER GUIDE $PSOL¿HUV Type Appearance )LEHU 6HOHFWLRQ *XLGH M8 plug-in connector type Cable set (Note 1) 9LHZLQJ QHZPRGHOV Standard type &KRRVH E\VKDSH DSSOLFDWLRQ M8 plug-in connector type &KRRVH E\PRGHO )LEHUV 6XSHU 4XDOLW\ 7KUHDGHG 7\SH 6PDOO 6SRW 1DUURH %HDP :LGH %HDP &RQYHUJHQW 5HIOHFWLYH 7\SH 5HWURUHIOHFWLYH 7\SH &KHPLFDO UHVLVWDQW +HDW UHVLVWDQW 9DFXXP UHVLVWDQW /LTXLG/HDN /LTXLG'HWHFWLRQ )LEHU 2SWLRQV )LEHU 'LPHQVLRQV 7KUXEHDP 7\SH 5HWURUHÀHFWLYH 7\SH 5HÀHFWLYH 7\SH 2WKHUV M8 plug-in connector type M8 plug-in connector type )ODW 7\SH Cable set (Note 1) 6OHHYH FX-101-Z (Note 3) NPN open-collector transistor FX-101P (Note 2) PNP open-collector transistor FX-101P-Z (Note 3) PNP open-collector transistor FX-101-CC2 NPN open-collector transistor FX-101P-CC2 PNP open-collector collector transistor FX-102 (Note 2) NPN open-collector transistor FX-102-Z (Note 3) NPN open-collector transistor FX-102P (Note 2) PNP open-collector transistor FX-102P-Z (Note 3) PNP open-collector transistor FX-102-CC2 NPN open-collector transistor FX-102P-CC2 PNP open-collector transistor * Only include cable set type FC-FX-1 (Protection cover) * It have been attached from the production at July, 2011. OPTIONS 0FRQQHFWRUDWWDFKHGFDEOH Designation Model No. CN-14A-C1 Connector attached cable Description 3 m 9.843 ft 5 m 16.404 ft CN-14A-R-C1 1 m 3.281 ft CN-14A-R-C2 2 m 6.562 ft CN-14A-R-C3 3 m 9.843 ft CN-14A-R-C5 5 m 16.404 ft M8 connector attached cable CN-24A-C2 2 m 6.562 ft CN-24A-C5 5 m 16.404 ft Connector CN-14A Set of 10 housings and 40 contacts End plates Copy unit ø4 ø0.157 CN-14A-C2 (Note 1) 2 m 6.562 ft CN-14A-C5 Connector attached cable (Flexible type) &1$&Ƒ 31.4 1.236 1 m 3.281 ft CN-14A-C3 $PSOLILHUV FX-100 VHULHV NPN open-collector transistor CN-14A-C2 Connector attached cable 2 m 6.562 ft Notes: 1) The connector attached cable CN-14A-C2 is supplied with the ampli er. 2) Make sure to use the optional connector attached cable CN-14A(-R)&Ƒ or the connector CN-14A, or a connector manufactured by J.S.T. Mfg. Co., Ltd. (contact: SPHD-001T-P0.5, housing: PAP-04V-S) 3) Make sure to use the optional M8 connector attached cable &1$&Ƒ. Ampli er MS-DIN-4 mounting bracket FX-500 VHULHV Output FX-101 (Note 2) Red LED Long sensing range type &\OLQGULFDO 7\SH $FFHVVRU\ Emitting element Model No. 0.2 mm2 4-core cabtyre cable with connector on one end Cable outer diameter: ø3.7 mm ø0.146 in M8 connector attached cable CN-24A-C□ Fixing ring For M8 plug-in connector type The connector on one end Cable outer diameter: ø4 mm ø0.157 in $PSOL¿HUPRXQWLQJ EUDFNHW MS-DIN-4 Mounting bracket for ampli er Two pcs. per set When it moves depending on the way it is installed on a DIN rail, these end plates ensure that all ampli ers are mounted together in a secure and fully connected manner. SC-SU1 Copy the controller settings to other controllers. MS-DIN-E ø9 ø0.354 Note: The connector attached cable CN-14A-C2 is supplied with the cable set type);Ƒ&&. &RQQHFWRU DWWDFKHGFDEOH CN-14A(-R)&Ƒ INDEX 5HFRPPHQGHGFRQQHFWRU Contact: SPHD-001T-P0.5, Housing: PAP-04V-S (Manufactured by J.S.T. Mfg. Co., Ltd.) Note: Contact the manufacturer for details of the recommended products. (DUOLHUPRGHOV FRPSDULVRQ WDEOH &RQQHFWRU CN-14A Contact 5HFRPPHQGHGFULPSLQJWRRO Model No.: YC-610R (Manufactured by J.S.T. Mfg. Co., Ltd.) Note: Contact the manufacturer for details of the recommended products. Housing 69 SPECIFICATIONS Model No. Type Item 1HZSURGXFW LQWURGXFWLRQ Standard type Long sensing range type Cable set Cable set NPN output FX-101(-Z) (Note 5) FX-101-CC2 FX-102(-Z) (Note 5) FX-102-CC2 PNP output FX-101P(-Z) (Note 5) FX-101P-CC2 FX-102P(-Z) (Note 5) FX-102P-CC2 Supply voltage Power consumption Output 12 to 24 V DC ±10 % Incorporated 7KUHDGHG 7\SH NPN non-contact input Signal condition High: +8 V to +V DC or Open Low: 0 to +2 V DC (Source current 0.5 mA or less) Input impedance: 10 k approx. PNP non-contact input Signal condition High: +4 V to +V DC (Sink current 0.5 to 3 mA) Low: 0 to +0.6 V DC or Open Input impedance: 10 k approx. Emission frequency 0: 250 μs or less (factory default setting) Emission frequency 1: 450 μs or less Emission frequency 2: 500 μs or less Emission frequency 3: 600 μs or less &\OLQGULFDO 7\SH 6OHHYH )ODW 7\SH 6PDOO 6SRW 1DUURH %HDP :LGH %HDP &RQYHUJHQW 5HIOHFWLYH 7\SH Orange LED (lights up when the output is ON) 4 digits (green) + 4 digits (red) LCD display 5HWURUHIOHFWLYH 7\SH Incorporated &KHPLFDO UHVLVWDQW ON-delay / OFF-delay timer, switchable either effective or ineffective [Timer period: 1 ms, 5 ms, 10 ms, 20 ms, 40 ms, 50 ms, 100 ms, 500 ms, 1,000 ms] +HDW UHVLVWDQW 3–level + Auto setting 9DFXXP UHVLVWDQW Attenuation function Environmental resistance Emission frequency 1: 2.5 ms or less (factory default setting) Emission frequency 2: 2.8 ms or less Emission frequency 3: 3.2 ms or less Emission frequency 4: 5.0 ms or less 2-point teaching / Limit teaching / Full-auto teaching Fine sensitivity adjustment function Incorporated Emission frequency selection method (Note 2) (Functions at emission frequency 1, 2 or 3) Incorporated Emission frequency selection method (Note 2) (Functions at emission frequency 1, 2, 3 or 4) –10 to +55 °C +14 to +131 °F (If 4 to 7 units are mounted close together: –10 to +50 °C +14 to +122 °F, if 8 to 16 units are mounted close together: –10 to +45 °C +14 to +113 °F) (No dew condensation or icing allowed), Storage: –20 to +70 °C –4 to +158 °F Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH Ambient illuminance Voltage withstandability 9LHZLQJ QHZPRGHOV 6XSHU 4XDOLW\ Digital display Ambient temperature &KRRVH E\VKDSH DSSOLFDWLRQ Selectable either Light-ON or Dark-ON, at SET mode Operation indicator Interference prevention function &KRRVH E\PRGHO )LEHUV Sensitivity setting Timer function )LEHU 6HOHFWLRQ *XLGH NPN open-collector transistor PNP open-collector transistor Maximum sink current: 100 mA Maximum source current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Applied voltage: 30 V DC or less (between output and +V) Residual voltage: 1.5 V or less (at 100 mA sink current) Residual voltage: 1.5 V or less (at 100 mA source current) Short-circuit protection Response time Ripple P-P 10 % or less Normal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage) ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage) Output operation External input 7RXJK )LEHU /LTXLG/HDN /LTXLG'HWHFWLRQ )LEHU 2SWLRQV Incandescent light: 3,000 x at the light-receiving face 1,000 V AC for one min. between all supply terminals connected together and enclosure (Note 3) )LEHU 'LPHQVLRQV Insulation resistance 20 M , or more, with 250 V DC megger between all supply terminals connected together and enclosure (Note 3) Vibration resistance 10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each 7KUXEHDP 7\SH Shock resistance 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for ve times each 5HWURUHÀHFWLYH 7\SH Emitting element (modulated) Red LED (Peak emission wavelength: 632 nm 0.025 mil) 5HÀHFWLYH 7\SH Material Enclosure: Polycarbonate, Key switch: Polycarbonate, Fiber lock lever: PBT Connecting method Cable length Weight Accessory Connector (Note 4) 2WKHUV Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. Net weight: 15 g approx. Gross weight: 35 g approx. Net weight: 15 g approx. Gross weight: 75 g approx. Net weight: 15 g approx. Gross weight: 35 g approx. FC-FX-1 (Protection cover): 1 pc. (Note 6) FC-FX-1 FC-FX-1 (Protection cover): 1 pc. (Note 6) CN-14A-C2 (Protection cover): 1 pc. (Note 6) (Connector attached cable, 2 m 6.562 ft long): 1 pc. Net weight: 15 g approx. Gross weight: 75 g approx. FC-FX-1 (Protection cover): 1 pc. (Note 6) CN-14A-C2 (Connector attached cable, 2 m 6.562 ft long): 1 pc. Notes: 1) Where measurement conditions have not been speci ed precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F. 2) When using the interference prevention function, set the emission frequencies for the ampli ers to be covered by the interference prevention function to different frequency values. However, the interference prevention function does not operate at emission frequency 0 (factory default setting) for the FX-101(P)(-Z) / FX-101(P)-CC2. 3) The voltage withstandability and the insulation resistance values given in the above table are for the ampli er only. 4) Connector attached cable CN-14A-C2 is not attached to the models that have no “-CC2” at the end of the model Nos. Make sure to use the optional connector attached cable CN-14A(-R)&Ƒ or the connector CN-14A, or a connector manufactured by J.S.T. Mfg., Ltd. (contact: SPHD-001T-P0.5, housing: PAP-04V-S). 5) Model Nos. having the suf x “-Z” are M8 plug-in connector type. Make sure to use the optional M8 attached connector cable &1$&Ƒ. 6) Protection cover FC-FX-1 has been attached from the production at July, 2011. $PSOLILHUV FX-500 VHULHV FX-100 VHULHV INDEX (DUOLHUPRGHOV FRPSDULVRQ WDEOH 70 ,2&,5&8,7$1':,5,1*',$*5$06 1HZSURGXFW LQWURGXFWLRQ 7RXJK )LEHU );Ƒ(=&&) NPN output type ,2FLUFXLWGLDJUDP 7HUPLQDODUUDQJHPHQWGLDJUDP )LEHU 6HOHFWLRQ *XLGH Terminal No. &KRRVH E\PRGHO &KRRVH E\VKDSH DSSOLFDWLRQ 1 Sensor circuit 2 Tr +8 V )ODW 7\SH 3 :LGH %HDP &RQYHUJHQW 5HIOHFWLYH 7\SH 5HWURUHIOHFWLYH 7\SH *1 FX-500 VHULHV FX-100 VHULHV INDEX (DUOLHUPRGHOV FRPSDULVRQ WDEOH 0V Terminal No. 1 or 3 Function +V 2 Output Non-voltage contact or NPN open-collector transistor External input 4 0V High (+8 V to +V DC, or open): Ineffective Low [0 to +2 V DC (source current 0.5 mA or less)]: Effective );Ƒ3(=&&) PNP output type ,2FLUFXLWGLDJUDP 7HUPLQDODUUDQJHPHQWGLDJUDP Terminal No. &RQQHFWRUW\SH Color code of cable with connector 1 Sensor circuit 3 *1 100 mA max. 2 D 4 (Black) Output (Blue) 0 V Load + – 12 to 24 V DC ±10 % Function +V 1 (White) External input ZD Tr Terminal No. (Brown) +V Internal circuit $PSOLILHUV 4 *1 )LEHU 2SWLRQV 2WKHUV External input 0SOXJLQFRQQHFWRUW\SH /LTXLG/HDN /LTXLG'HWHFWLRQ 5HÀHFWLYH 7\SH Output 3 Symbols … D : Reverse supply polarity protection diode ZD: Surge absorption zener diode Tr : NPN output transistor 9DFXXP UHVLVWDQW 5HWURUHÀHFWLYH 7\SH 2 (Blue) 0 V +HDW UHVLVWDQW 7KUXEHDP 7\SH 12 to 24 V DC ±10 % Users’ circuit &KHPLFDO UHVLVWDQW )LEHU 'LPHQVLRQV + – Function +V 1 (White) External input Internal circuit 6PDOO 6SRW 1DUURH %HDP Load 100 mA max. 4 6XSHU 4XDOLW\ 6OHHYH (Black) Output ZD )LEHUV &\OLQGULFDO 7\SH Terminal No. (Brown) +V D 9LHZLQJ QHZPRGHOV 7KUHDGHG 7\SH &RQQHFWRUW\SH Color code of cable with connector 2 Output 3 External input 4 0V Users’ circuit 0SOXJLQFRQQHFWRUW\SH Symbols … D : Reverse supply polarity protection diode ZD: Surge absorption zener diode Tr : PNP output transistor Terminal No. 1 *1 +V 2 Non-voltage contact or PNP open-collector transistor or High [ +4 V to +V DC (sink current 0.5 to 3 mA)]: Effective Low (0 to +0.6 V DC, or open): Ineffective 3 Function 4 Output External input 0V 71 Refer to the “Operation Guide” on our website for details pertaining to operating instructions for the ampli er. PRECAUTIONS FOR PROPER USE Never use this product as a sensing device for personnel protection. In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. 8VLQJLQFRPELQDWLRQZLWKWKH););VHULHV The FX-100 series does not use the horizontal connectors that are used with the FX-300 / FX-410 series. Please note that horizontal connection cannot be performed using a connector attached cable. In addition, the optical communication function is not equipped on the FX-100 series, so it is unable to perform interference prevention for use with the FX-300 / FX-410 series. If using the FX-100 series together with the FX-300 / FX-410 series side-by-side, please set the same models together in groups. 0RXQWLQJ :KHQXVLQJD',1UDLO! +RZWRPRXQWWKHDPSOL¿HU Fit the rear part of the mounting section of the ampli er on a 35 mm 1.378 in width DIN rail. Press down the rear part of the mounting section of the unit on the 35 mm 1.378 in width DIN rail and t the front part of the mounting section to the DIN rail. Make sure that the power supply is OFF while adding or removing the ampli ers. Note that if a voltage exceeding the reted range is applied, or if an AC power supply is directly connected, the product may get burnt or damaged. Note that short-circuit of the load or wrong wiring may burn or damage the product. Do not run the wires together with high-voltage lines or power lines, or put them in the same raceway. This can cause malfunction due to induction. Verify that the supply voltage variation is within the rating. If power is supplied from a commercial switching regulator, ensure that the frame ground (F.G.) terminal of the power supply is connected to an actual ground. In case noise generating equipment (switching regulator, inverter motor, etc.) is used in the vicinity of this product, connect the frame ground (F.G.) terminal of the equipment to an actual ground. Make sure to use the quick-connection cable (optional) for the connection of the controller. Extension up to total 100 m 328.084 ft is possible with 0.3 mm2 or more, cable. However, in order to reduce noise, make the wiring as short as possible. 2 Operation indicator (Orange) )LEHU 6HOHFWLRQ *XLGH &KRRVH E\PRGHO &KRRVH E\VKDSH DSSOLFDWLRQ 9LHZLQJ QHZPRGHOV )LEHUV 6XSHU 4XDOLW\ 7KUHDGHG 7\SH &\OLQGULFDO 7\SH 6OHHYH )ODW 7\SH 6PDOO 6SRW 1DUURH %HDP :LGH %HDP &RQYHUJHQW 5HIOHFWLYH 7\SH 5HWURUHIOHFWLYH 7\SH ON key / Setting value UP key OFF key / Setting value DOWN key &KHPLFDO UHVLVWDQW +HDW UHVLVWDQW MODE key 35 mm 1.378 in width DIN rail +RZWRUHPRYHWKHDPSOL¿HU Push the ampli er forward. Lift up the front part of the ampli er to remove it. 7RXJK )LEHU :LULQJ 3DUWGHVFULSWLRQ 1 1HZSURGXFW LQWURGXFWLRQ 9DFXXP UHVLVWDQW Digital display (Green) (Threshold value) Digital display (Red) (Incident light intensity) /LTXLG/HDN /LTXLG'HWHFWLRQ 1 2 6HWWLQJPRGH Setting mode appears after the MODE key is pressed for 2 sec. in RUN mode. Note: Take care that if the front part is lifted without pushing the ampli er forward, the hook on the rear portion of the mounting section is likely to break. :KHQXVLQJVFUHZVZLWKZDVKHUV! Use M3 screws with washers for mounting. The tightening torque should be 0.5 N·m or less. Setting item Factory setting Teaching mode Output operation setting Timer operation setting M3 screw with washer Timer setting Description Threshold value can be set in 2-point teaching, limit teaching, or full-auto teaching. [Dark-ON] Light-ON or Dark-ON can be set. 7KUXEHDP 7\SH 5HÀHFWLYH 7\SH 2WKHUV [Without timer] Without timer, ON delay timer, or OFF delay timer can be set. In case of setting ON-delay timer or OFF-delay $PSOLILHUV can be set. When timer is not set, this mode is FX-500 VHULHV [ON-delay timer: 10 ms] timer in the timer operation setting mode, timer Level 3 Setting for reduced intensity of emission amount is possible when the incident light intensity is saturated. );Ƒ Emission frequency setting )LEHU 'LPHQVLRQV 5HWURUHÀHFWLYH 7\SH [OFF-delay timer: 10 ms] not displayed. Emission amount setting )LEHU 2SWLRQV 0 (Response time: 250 μs or less) );Ƒ 1 (Response time: 2.5 ms or less) FX-100 VHULHV INDEX In case of using the ber heads in parallel, interference can be prevented by setting different emission frequency. However, when emission frequency 0 is set, interference cannot be prevented. Response time corresponds to emission frequency. (DUOLHUPRGHOV FRPSDULVRQ WDEOH 72 1HZSURGXFW LQWURGXFWLRQ 7RXJK )LEHU PRECAUTIONS FOR PROPER USE 352PRGH PRO mode appears after the MODE key is pressed for 4 sec. in RUN mode. )LEHU 6HOHFWLRQ *XLGH &KRRVH E\PRGHO &KRRVH E\VKDSH DSSOLFDWLRQ Setting item Factory setting Shift setting 9LHZLQJ QHZPRGHOV )LEHUV External input setting 6XSHU 4XDOLW\ 7KUHDGHG 7\SH &\OLQGULFDO 7\SH 6OHHYH )ODW 7\SH 6PDOO 6SRW 1DUURH %HDP :LGH %HDP &RQYHUJHQW 5HIOHFWLYH 7\SH 5HWURUHIOHFWLYH 7\SH &KHPLFDO UHVLVWDQW Threshold value-storing setting mode (Note 2) Threshold value follow-up cycle setting (Note 3) GETA function setting (Note 4, 5) [OFF] [OFF] [OFF] +HDW UHVLVWDQW 9DFXXP UHVLVWDQW /LTXLG/HDN /LTXLG'HWHFWLRQ )LEHU 2SWLRQV )LEHU 'LPHQVLRQV 7KUXEHDP 7\SH 5HWURUHÀHFWLYH 7\SH ECO setting Digital display inversion setting Threshold value margin setting [OFF] [OFF] [OFF] 5HÀHFWLYH 7\SH 2WKHUV Setting copy $PSOLILHUV FX-500 VHULHV FX-100 VHULHV INDEX (DUOLHUPRGHOV FRPSDULVRQ WDEOH Reset Description Shift amount can be selected from 0 to 80 % in the limit teaching. Select 0 % when it is desired [Shift amount 15 %] to set the present incident light intensity as a threshold value. External input can be selected from emission halt, limit teaching [+], limit teaching [-], full-auto teaching, ECO (Note 1), 2-point teaching or emission amount test. When setting the incident ”, output turns ON / light intensity test “ OFF every 100ms when the rate of incident [Emission halt] light intensity and threshold value is less than half of the set shift amount (for example, when the rate of incident light intensity and threshold value is within ±10 % for 20 % of shift amount) at external input. [NO] [NO] Threshold value set at the limit teaching, full-auto teaching or 2-point teaching by external input is stored. When selecting Auto in the emission amount setting mode, the set emission amount level is also stored. When incident light intensity exceeds threshold value, this mode can change the threshold value with each set cycle depending on variations of the incident light intensity. The follow-up shift amount is same as the one set in the shift setting mode. However, the threshold value is not stored. Variations can be reduced by correcting the present incident light intensity in each ampli er to a target value. Target value to offset incident light intensity can be selected from 0 to 2,000 by 100 unit each. For example, if the target value is set to 2,000 when the incident light intensity is 1,500, the incident light intensity becomes 2,000. It is possible to light up / turn off the digital display. When ECO setting mode is ON, the display turns off in 20 sec. approx. in RUN mode. To light up the display again, press any key for 2 sec. or more. Digital display can be inverted. Margin for threshold value to the present incident light intensity can be checked. When there is no margin, it is possible to make the digital display blink. : Set to “OFF”: does not function. : Green blinks. : Red blinks. : Red and green blink. : When conducting limit teaching or 2-point teaching by external input, in case the rate of reference incident light intensity and threshold value after teaching is 200% or more, or in case it is less than half of the shift amount, output turns ON / OFF every 100 ms. (Note 6) The settings of the master side ampli er can be copied to the slave side ampli er. For details, refer to “6HWWLQJFRS\IXQFWLRQ”. Returns to default settings (factory settings.) Notes: 1) When ECO is selected at the external input setting mode, key operation on the main body is invalid during external input. 2) This mode is not indicated unless any of “ ”, “ ”, ” or “ ” is set at the external input setting mode. “ 3) If the incident light intensity becomes “300” or less, the follow-up operation stops. In that condition, threshold value [digital display (green)] blinks. This function can be used when thru-beam type or retrore ective type ber is applied to this product. If re ective type ber is applied, the function cannot be used depending on use conditions. 4) If MODE key is pressed in RUN mode when GETA function is used, the incident light intensity before setting GETA function is displayed on the red digital display for 2 sec. approx. 5) When GETA function is used in saturation of incident light intensity (4,000 or more,) “ ” is indicated on the red digital display. Correction value is up to 4,000. 6) This mode does not operate unless any of “ ”, “ ” or ” is set at the external input setting mode. “ Refer to the “Operation Guide” on our website for details pertaining to operating instructions for the ampli er. 6HWWLQJFRS\IXQFWLRQ This can copy the settings of the master side ampli er to the slave side ampli er. Be sure to use the setting copy function between the identical models (Between );Ƒ models or );Ƒ models). This function cannot be used between different models. Only one sensor can be connected on slave side with a master side sensor for the setting copy function. Threshold value, output operation setting, timer operation setting, timer setting, light-emitting amount setting, shift setting, external input setting, threshold value margin setting, ECO setting, digital display inversion setting, and threshold value margin setting can be copied. 6HWWLQJSURFHGXUHV! Set the setting copy mode of the master side ampli er to “Copy sending ON”, and press the MODE key so that “ ” is shown on the digital display and the sensor is in copy ready state. For the setting method, refer to “Operation guide”. Turn off the master side ampli er. Connect the master side ampli er with the slave side ampli er as shown below. Color code of cable with connector Master side amplifier (Brown) +V (Black) Input (White) External input + – 12 to 24V DC ±10 % (Blue) 0 V Slave side amplifier (Brown) +V (Black) Input (White) External input (Blue) 0 V Turn on the master side ampli er and the slave side ampli er at the same time. (Note) “ ” is shown on the green digital display of the master side ampli er and 4-digit code is shown on the red digital display of it, then the copying starts. During copy communication, “ ” is shown on the green digital display of the slave side ampli er, and the ongoing copy communication indicator (“ ” “ ” “ ” ” “ ” “ ” “ ” “ ”) is displayed on “ the red digital display. When the copying is completed, “ ” is shown on the green digital display of the slave side ampli er, while the 4-digit code (the same code as the master side ampli er) is shown on the red digital display of it. Turn off the power of the master side ampli er and the slave side ampli er and disconnect the wire. * If copying the settings to another ampli er repeatedly, follow the steps to . Note: Take care that if the power is not turned on at the same time, the setting contents may not be copied. 7RFDQFHOWKHVHWWLQJFRS\PRGHRIWKHPDVWHUVLGHDPSOL¿HU! While the slave side ampli er is disconnected, turn on the power of the master side ampli er. Press the MODE key for 2 sec. approx. 73 Refer to the “Operation Guide” on our website for details pertaining to operating instructions for the ampli er. PRECAUTIONS FOR PROPER USE 2WKHUV &RGHVHWWLQJIXQFWLRQ The code setting function makes it possible to set the output operation, timer operation, amount of light emitted, frequency of light emitted, ECO setting, external input, and amount of shift by selecting a code of one’s choice. While in the RUN Mode, pressing and holding both the ON key ( ) and OFF key ( ) simultaneously for 4 seconds will switch to the code setting function. Output Timer operation (Note 1) 2nd digit 3rd digit Emission frequency 4th digit Emission External ECO amount input setting FX-101Ƒ FX-102Ƒ Shift (Note 1) 5% non 0 1 Emission halt ond 10 ms 1 2 Limit teaching [+] Level 3 (OFF) D-ON 7DEOHRITXLFNVHWWLQJQXPEHUV! No. Output operation Timer non Level 3 (OFF) D-ON non Level 2 (ON) D-ON ofd 10 ms Level 3 (OFF) D-ON ofd 10 ms Level 2 (ON) D-ON ofd 40 ms Level 3 (OFF) D-ON ofd 40 ms Level 2 (ON) D-ON ond 10 ms Level 3 (OFF) D-ON ond 10 ms Level 2 (ON) D-ON ond 40 ms Level 3 (OFF) D-ON ond 40 ms Level 2 (ON) L-ON ond 40 ms Level 2 (ON) L-ON ond 40 ms Level 3 (OFF) L-ON ond 10 ms Level 2 (ON) L-ON ond 10 ms Level 3 (OFF) L-ON ofd 40 ms Level 2 (ON) L-ON ofd 40 ms Level 3 (OFF) L-ON ofd 10 ms Level 2 (ON) L-ON ofd 10 ms Level 3 (OFF) L-ON non Level 2 (ON) L-ON non Level 3 (OFF) &KRRVH E\PRGHO &KRRVH E\VKDSH DSSOLFDWLRQ 2 ond 40 ms 3 OFF Limit teaching [-] ofd 10 ms 3 4 Full-auto teaching ofd 40 ms 0 1 ECO 6XSHU 4XDOLW\ 7KUHDGHG 7\SH &\OLQGULFDO 7\SH 6OHHYH 10 % )ODW 7\SH 6PDOO 6SRW 1DUURH %HDP 15 % 20 % 25 % Emission amount setting D-ON )LEHU 6HOHFWLRQ *XLGH )LEHUV 1st digit 4XLFNVHWWLQJIXQFWLRQ The quick setting function makes it possible to set the content of the SET Mode (output operation, timer operation, amount of light emitted, and frequency of light emitted) simply by selecting a setting number. While in the RUN Mode, pressing and holding both the ON key ( ) and OFF key ( ) simultaneously for 2 seconds will switch to the quick setting function. 7RXJK )LEHU 9LHZLQJ QHZPRGHOV &RGHWDEOH! Code Our products have been developed / produced for industrial use only. Do not use during the initial transient time (0.5 sec.) after the power supply is switched on. Take care that the product is not directly exposed to uorescent lamp from a rapid-starter lamp, a high frequency lighting device or sunlight etc., as it may affect the sensing performance. This product is suitable for indoor use only. Avoid dust, dirt, and steam. Take care that the product does not come in contact with oil, grease, organic solvents, such as thinner, etc., strong acid or alkaline. This product cannot be used in an environment containing in ammable or explosive gases. Never disassemble or modify this product. EEPROM is adopted to this product. It is not possible to conduct teaching 100 thousand times or more, because of the EEPROM’s lifetime. 1HZSURGXFW LQWURGXFWLRQ :LGH %HDP &RQYHUJHQW 5HIOHFWLYH 7\SH 5HWURUHIOHFWLYH 7\SH &KHPLFDO UHVLVWDQW +HDW UHVLVWDQW 1 2 Emission halt 30 % ond 10 ms 2 3 Limit teaching [+] 35 % ond 40 ms 3 4 Limit teaching [-] 40 % ofd 10 ms 0 1 Full-auto teaching 45 % 50 % non Level 2 (ON) L-ON ofd 40 ms ON 1 2 ECO 2 3 2-point teaching /LTXLG/HDN /LTXLG'HWHFWLRQ OFF 4 Incident light intensity test 0 1 2-point teaching ON 1 2 Incident light intensity test Auto 2 3 3 4 )LEHU 2SWLRQV )LEHU 'LPHQVLRQV Level 1 3 9DFXXP UHVLVWDQW Notes: 1) When the present setting is out of the code setting range, “ ” is shown. When “ ” is selected, the set content of the digit is not changed. 2) The factory setting is “ ”. 7KUXEHDP 7\SH 5HWURUHÀHFWLYH 7\SH 5HÀHFWLYH 7\SH 2WKHUV $PSOLILHUV FX-500 VHULHV FX-100 VHULHV INDEX (DUOLHUPRGHOV FRPSDULVRQ WDEOH 74 1HZSURGXFW LQWURGXFWLRQ 7RXJK )LEHU ',0(16,2168QLWPPLQ) );Ƒ  );Ƒ )LEHU 6HOHFWLRQ *XLGH 0.8 0.031 &KRRVH E\PRGHO &KRRVH E\VKDSH DSSOLFDWLRQ Ampli er 48 1.890 30 1.181 20 13.2 0.787 0.520 6 0.236 2.7 0.106 0.7 0.028 66.2 2.606 9 0.354 7 0.276 Digital display (Green, Red) 3 0.118 10 ø3.2 ø0.126 6.5 0.256 1DUURH %HDP 7 0.276 1 0.039 0.8 0.031 4 0.157 3 0.118 ø6.5 ø0.256 10 30 0.3941.181 10 0.394 ø3.2 ø0.126 3.2 2 0.126 50 1.969 35 1.378 65.5 2.579 14.5 0.571 6 0.236 1.1 0.043 8.1 0.319 0.394 66.2 2.606 9 0.354 2 0.079 10 30 0.394 1.181 0.8 0.031 4 0.157 6PDOO 6SRW 6.5 0.256 14.5 0.571 0.079 3.2 8.1 0.126 0.319 2 0.079 50 1.969 35 1.378 65.5 2.579 Suitable for 35 mm 1.378 in width DIN rail Suitable for 35 mm 1.378 in width DIN rail Note: The protection cover has been attached from the production at July, 2011. Note: The protection cover has been attached from the production at July, 2011. Ampli er mounting bracket (Optional) MS-DIN-4 ø7.2 mm ø0.283 in spot facing, 4 0.157 deep ø3.2 ø0.126 3.2 0.126 9DFXXP UHVLVWDQW 9.25 0.364 2.75 0.108 3 0.118 15 0.591 ø6.2 mm ø0.244 in spot facing, 3 0.118 deep 1 0.039 15 0.591 4 0.157 5 0.197 Material: PBT M3 (Iength 18 mm 0.709 in) pan head screws 60 2.362 3 0.118 6.2 mm 0.244 in spot facing, 3 0.118 deep 3.2 0.126 ø3.2 ø0.126 M3 square nut 5.6 0.220 24.7 0.972 9 0.354 1.6 0.063 11.5 0.453 )LEHU 2SWLRQV End plate (Optional) MS-DIN-E 7.2 mm 0.283 in spot facing, 4 0.157 deep +HDW UHVLVWDQW )LEHU 'LPHQVLRQV OFF key / Setting value DOWN key ON key / Setting value UP key MODE key 4.1 Operation indicator (Orange) 0.161 0.75 0.030 2 0.079 6 0.236 1.1 0.043 )ODW 7\SH /LTXLG/HDN /LTXLG'HWHFWLRQ 2.7 0.106 0.75 0.030 6OHHYH &KHPLFDO UHVLVWDQW 0.8 0.031 OFF key / Setting value DOWN key ON key / Setting value UP key MODE key Digital display (Green, Red) &\OLQGULFDO 7\SH 5HWURUHIOHFWLYH 7\SH 6 0.236 6 0.236 0.427 48 1.890 30 1.181 20 13.2 0.787 0.520 0.7 0.028 6XSHU 4XDOLW\ &RQYHUJHQW 5HIOHFWLYH 7\SH Ampli er FX-102(P)-Z 10.85 )LEHUV :LGH %HDP FX-101(P)-Z 6 0.236 4.1 Operation indicator (Orange) 0.161 9LHZLQJ QHZPRGHOV 7KUHDGHG 7\SH The CAD data in the dimensions can be downloaded from our website. 1 0.039 24.5 0.965 35 1.378 32 1.260 4 0.157 Suitable for 35 mm 1.378 in width DIN rail Material: Polycarbonate 7KUXEHDP 7\SH 5HWURUHÀHFWLYH 7\SH &1$&Ƒ  &1$5&Ƒ 5HÀHFWLYH 7\SH 2WKHUV $PSOLILHUV FX-500 VHULHV FX-100 VHULHV INDEX (DUOLHUPRGHOV FRPSDULVRQ WDEOH (0.3158 ) 35 1.378 ( ) Connector attached cable (Optional) L CN-14A-C2 is attached FX-101(P)-CC2 / FX-102(P)-CC2 Length L 50 1.969 ( ) (0.3158 ) ø3.7 ø0.146 cable Model No. CN-14A(-R)-C1 CN-14A(-R)-C2 CN-14A(-R)-C3 CN-14A(-R)-C5 Length L 1,000 39.370 2,000 78.740 3,000 118.110 5,000 196.850 75 76 INDEX 1HZSURGXFW LQWURGXFWLRQ 7RXJK Fiber Fiber 6HOHFWLRQ Guide Choose by model Choose by shape/ DSSOLFDWLRQ 9LHZLQJ new models Fibers Super Quality Threaded Type &\OLQGULFDO Type 6OHHYH Flat Type Small Spot Narrow Beam C CN-14A CN-14A-C1 CN-14A-C2 CN-14A-C3 CN-14A-C5 CN-14A-R-C1 CN-14A-R-C2 CN-14A-R-C3 CN-14A-R-C5 CN-71-C1 CN-71-C2 CN-71-C5 CN-72-C1 CN-72-C2 CN-72-C5 CN-73-C1 CN-73-C2 CN-73-C5 CN-74-C1 CN-74-C2 CN-74-C5 FX-100 Connector P.68 FX-100 Connector Attached Cable P.68/P.74 FX-100 Connector Attached Cable (Flexible) FX-500 Quick-connection Cable P.58/P.64 Wide Beam &RQYHUJHQW 5HIOHFWLYH Type 5HWURUHIOHFWLYH Type &KHPLFDO resistant Heatresistant 9DFXXP resistant Liquid Leak / /LTXLG'HWHFWLRQ Fiber Options Fiber Dimensions Thru-beam Type 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models FRPSDULVRQ table F FB-1 FC-FX-1 FD-30 FD-31 FD-31W FD-32G FD-32GX FD-40 FD-41 FD-41S FD-41SW FD-41W FD-42G FD-42GW FD-60 FD-61 FD-61G FD-61S FD-61W FD-62 FD-64X FD-A16 FD-AL11 FD-E13 FD-E23 Fiber Bender FX-100 Protection Cover Super Quality Fiber Threaded Type Fiber Threaded / Small Spot Type Fiber P.14/P.33/P.51 P.68 P.9/P.42 P.11/P.42 P.11/P.18/P.42 Super Quality Fiber Threaded Type Fiber P.9/P.42 P.11/P.42 Sleeve Fiber P.15/P.42 Threaded Type Fiber P.11/P.42 Threaded / Small Spot Type Fiber Super Quality Fiber P.11/P.18/P.43 P.9/P.43 Threaded Type Fiber P.11/P.43 Sleeve Fiber P.15/P.43 Threaded Type Fiber P.11/P.43 P.11/P.44 Wide Beam Fiber P.20/P.44 Cylindrical / Sleeve Fiber P.13/P.15/P.44 FD-EG30 Threaded / Small Spot Type Fiber P.11/P.18/P.44 FD-EG30S Sleeve Fiber FD-EG31 Threaded / Small Spot Type Fiber P.11/P.18/P.45 FD-F4 FD-F41 FD-F41Y FD-F71 FD-F8Y FD-FA93 Liquid Leak / Liquid Detection Fiber P.28/P.45 P.15/P.45 FD-G40 FD-G60 FD-H13-FM2 FD-H18-L31 FD-H20-21 FD-H20-M1 FD-H25-L43 FD-H25-L45 FD-H30-KZ1V FD-H30-KZ1V-S FD-H30-L32 FD-H30-L32V FD-H30-L32V-S FD-H35-20S FD-H35-M2 FD-H35-M2S6 FD-HF40Y FD-L10 FD-L11 FD-L12W FD-L20H FD-L21 FD-L21W FD-L22A FD-L23 FD-L30A FD-L31A FD-L32H FD-R60 FD-S21 FD-S30 FD-S31 FD-S32 FD-S32W FD-S33GW FD-V30 FD-V30W FD-V50 FD-WZ4 FD-WZ7 FD-Z20HBW FD-Z40HBW FD-Z50HW FDP-1000 FDP-1500 FDP-500 FDP-N1000 FDP-N1500 FDP-N500 FR-KZ22E FR-KZ50E FR-KZ50H FR-Z50HW FT-140 FT-30 FT-31 FT-31S FT-31W FT-40 FT-41 FT-42 FT-42S Metal-free Fiber Heat-resistant Fiber P.10/Website P.25/P.46 Vacuum-resistant Fiber P.27/P.32 P.26/P.47 P.25/P.47 P.27/P.32 P.26/P.47 Heat-resistant Fiber P.25/P.47 Liquid Leak / Liquid Detection Fiber P.28/P.47 Convergent Reflective Type Fiber P.21/P.48 Vacuum-resistant Fiber Heat-resistant Fiber Threaded Type Fiber Cylindrical Fiber Super Quality Fiber P.21/P.49 P.11/P.49 P.13/P.49 P.9/P.49 Cylindrical Fiber P.13/P.49 Sleeve Fiber P.15/P.50 Flat Type Fiber P.17/P.50 Narrow Beam Fiber P.19/P.50 Protective Tube (For Reflective Type Fiber) P.33/P.51 Narrow Beam / Retroreflective Type Fiber Threaded Type Fiber Super Quality Fiber Threaded Type Fiber Sleeve Fiber Threaded Type Fiber Super Quality Fiber Metal-free Fiber Threaded Type Fiber Sleeve Fiber P.19/P.22/P.41 P.10/P.34 P.9/P.34 P.10/P.34 P.15/P.34 P.10/P.34 P.9/P.34 P.10/Website P.10/P.34 P.15/P.34 77 INDEX FT-42W FT-43 FT-45X FT-A11 FT-A11W FT-A32 FT-A32W FT-AL05 FT-E13 FT-E23 FT-F93 FT-H13-FM2 FT-H20-J20 FT-H20-J20-S FT-H20-J30 FT-H20-J30-S FT-H20-J50 FT-H20-J50-S FT-H20-M1 FT-H20-VJ50 FT-H20-VJ50-S FT-H20-VJ80 FT-H20-VJ80-S FT-H20W-M1 FT-H30-M1V FT-H30-M1V-S FT-H35-M2 FT-H35-M2S6 FT-HL80Y FT-J8 FT-KS40 FT-KV26 FT-KV40 FT-KV40W FT-L80Y FT-R40 FT-R41W FT-R42W FT-S11 FT-S20 FT-S21 FT-S21W FT-S30 FT-S31W FT-S32 FT-V23 FT-V24W FT-V25 FT-V30 FT-V40 FT-V80Y FT-WZ4 FT-WZ7 FT-Z20HBW FT-Z30 FT-Z30E FT-Z30EW FT-Z30H FT-Z30HW FT-Z30W FT-Z40HBW FT-Z802Y 1HZSURGXFW LQWURGXFWLRQ Threaded Type Fiber P.10/P.34 P.10/P.35 Wide Beam Fiber P.20/P.35 Protective Tube (For Thru-beam Type Fiber) FV-BR1 Photo-terminal for Vacuum-resistant Fiber P.27/P.32/P.51 Vacuum-resistant Expansion Lens Vacuum-resistant Side-view Lens P.27/P.31/P.51 Chemical-resistant Fiber P.23/P.37 Threaded Type Fiber P.10/P.37 Cylindrical Fiber Super Quality Fiber P.12/P.37 P.9/P.38 FV-LE1 FV-SV2 FX-101 FX-101-CC2 FX-101P FX-101P-CC2 FX-102 FX-102-CC2 FX-102P FX-102P-CC2 FX-501 FX-501P FX-502 FX-502P FX-505-C2 FX-505P-C2 FX-AT15A FX-AT2 FX-AT3 FX-AT4 FX-AT5 FX-AT6 FX-CT1 FX-CT2 FX-CT3 FX-LE1 FX-LE2 FX-MB1 FX-MR1 FX-MR2 FX-MR3 FX-MR5 FX-MR6 Cylindrical Fiber P.12/P.38 FX-SV1 Cylindrical / Sleeve Fiber Liquid Leak / Liquid Detection Fiber Heat-resistant Fiber P.12/P.15/P.35 P.28/P.35 P.24/P.35 P.25/P.32 P.24/P.36 P.25/P.32 P.24/P.36 P.25/P.32 P.24/P.36 P.25/P.32 P.24/P.36 P.25/P.32 P.24/P.36 Vacuum-resistant Fiber P.27/P.32 P.26/P.36 Heat-resistant Fiber P.24/P.36 Chemical-resistant Fiber P.23/P.36 Fiber for Atmospheric Side Narrow Beam Fiber Super Quality Fiber Cylindrical Fiber Sleeve Fiber Cylindrical Fiber Chemical-resistant Fiber P.27/P.32/P.51 P.19/P.37 P.33/P.51 Fiber 6HOHFWLRQ Guide Choose by model Choose by shape/ DSSOLFDWLRQ 9LHZLQJ new models Fibers P.68/P.74 Super Quality Threaded Type &\OLQGULFDO Type Digital Fiber Sensor 6OHHYH Flat Type P.58/P.64 Small Spot Narrow Beam Fiber Single-core Holder P.33 Wide Beam &RQYHUJHQW 5HIOHFWLYH Type Fiber Attachment P.32/P.52 5HWURUHIOHFWLYH Type &KHPLFDO resistant Fiber Cutter P.32 P.32/P.52 P.32 Lens for Thru-beam Type Fiber P.30/P.52 FX-500 Fiber Amplifier Protection Seal Side-view Lens for Thru-beam Type Fiber 9DFXXP resistant Liquid Leak / /LTXLG'HWHFWLRQ P.59 P.18/P.32/P.52 Lens for Reflective Type Fiber Heatresistant P.18/P.32/P.53 P.31/P.53 Fiber Options Fiber Dimensions Thru-beam Type P.9/P.38 5HWURUHÀHFWLYH Type P.12/P.38 5HÀHFWLYH Type P.15/P.38 P.12/P.39 P.23/P.39 M Flat Type Fiber P.16/P.40 P.23/P.40 Others MS-AJ1-F MS-AJ2-F MS-DIN-2 MS-DIN-4 Universal Sensor Mounting Stand MS-DIN-E End Plate MS-EX3 FX-MR2 Mounting Bracket MS-FD-2 P.16/P.39 Chemical-resistant Fiber 7RXJK Fiber FTP-1000 FTP-1500 FTP-500 FTP-N1000 FTP-N1500 FTP-N500 MS-FD-3 MS-FD-F7-1 MS-FD-F7-2 MS-FX-01Y MS-FX-02Y MS-FX-03Y MS-FX-YF FX-500 Amplifer Mounting Bracket FX-100 Amplifer Mounting Bracket Fiber Mounting Bracket P.33 P.59/P.64 P.68/P.74 P.58/P.64/P.68/ P.74 P.53 Liquid Inflow Prevention Joint Protective Tube Extension Joint Fiber Mounting Joint Joint Internal Ferrulre FX-500 series FX-100 series P.27/P.32/P.53 P.53 FD-F71 SUS Mounting Bracket FD-F71 PVC Mounting Bracket Amplifiers INDEX P.29 P.29/P.33 Earlier models FRPSDULVRQ table 78 INDEX 1HZSURGXFW LQWURGXFWLRQ 7RXJK Fiber R RF-003 Fiber 6HOHFWLRQ Guide Choose by model Choose by shape/ DSSOLFDWLRQ RF-13 RF-210 RF-220 RF-230 FR-KZ50E/KZ50H Exclusive Reflector Reflective Tape Reflector P.32/P.53 P.32 P.22/P.33/P.54 9LHZLQJ new models S Fibers Super Quality Threaded Type &\OLQGULFDO Type 6OHHYH Flat Type Small Spot Narrow Beam Wide Beam &RQYHUJHQW 5HIOHFWLYH Type 5HWURUHIOHFWLYH Type &KHPLFDO resistant Heatresistant 9DFXXP resistant Liquid Leak / /LTXLG'HWHFWLRQ Fiber Options Fiber Dimensions Thru-beam Type 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models FRPSDULVRQ table SC-SU1 Copy Unit P.68 79 80 Earlier Models Comparison Table New product introduction Advantages of switching to recommended replacements Tough Fiber Fiber Selection Guide Choose by model The quality of many models has been improved by shortening their bending radii and achieving better bending performance. The number of part numbers has been reduced, letting you reduce the part numbers to keep track of and service parts to keep on hand. We have reduced our environmental impact further by making ber end bracket out of stainless steel and plastic, which contain no RoHS substances. Choose by shape/ application Subjected models Viewing new models Discontinued models Stopping taking order date : 31 Mar., 2012 Type Discontinued models Model No. Bending radius (mm) Shape of fiber head (mm) Fibers Recommended replacements Bend- Sensing ing range dura- FX-500 bility STD (mm in) ➡ Model No. Shape of fiber head (mm) Bend- Sensing Main points of difference from ing range discontinued models dura- FX-500 bility STD (mm in) 7RXJK Super Quality R25 FD-A15 Threaded Type − 200 7.874 FD-A16 Sleeve − 280 11.024 FD-AL11 R25 FD-AFM2E − 280 11.024 FD-AL11 M6 Wide Beam R25 FD-B8 − 490 19.291 FD-62 FD-E12 Chemicalresistant R10 15 3 − 12 0.472 15 3 R25 − 15 5 55 2.165 FD-E23 15 5 Sleeve part cannot be bent. Sleeve part cannot be bent. Liquid Leak / Liquid Detection High precision • Coaxial Lens mountable（FX-MR3、FX-MR6） Coaxial, Lens mountable Reflective type Vacuumresistant R4 − 12 0.472 ・Split amplifier insertion section configuration ⇒ Changed to integrated light emitting/receiving configuration R4 − 55 2.165 ・Split amplifier insertion section configuration ⇒ Changed to integrated light emitting/receiving configuration − ・Split amplifier insertion section configuration ⇒ Changed to 48 integrated light emitting / receiving 1.890 configuration ・End bracket total length 17 mm ⇒ Changed to 16 mm M3 R25 − 40 1.575 − ・Split amplifier insertion section configuration ⇒ Changed to integrated 20 light emitting/receiving configuration ・End bracket total length 17 mm ⇒ 0.787 Changed to 16 mm ・Protective tube outside diameter ø1.6 ⇒ Changed to ø1.2 R4 − ・Split amplifier insertion section configuration ⇒ Changed to integrated 20 light emitting/receiving configuration ・End bracket total length 17 mm ⇒ 0.787 Changed to 16 mm ・Protective tube outside diameter ø1.6 ⇒ Changed to ø1.2 R4 − 50 1.969 ・Split amplifier insertion section configuration ⇒ Changed to integrated light emitting /receiving configuration ・Sleeve size ø0.5 ⇒ Changed to ø0.8 R4 − 50 1.969 ・Split amplifier insertion section configuration ⇒ Changed to integrated light emitting/receiving configuration M3 High precision • Coaxial Lens mountable（FX-MR3、FX-MR6） Light emitting fiber element φ0.175 M3 R4 FD-EG30 16 17 FD-EG2 ・End bracket total length for the M6 part only: 15 mm ⇒ Changed to 17 mm (M6 part/15 mm + ø4.5 area/2 mm ) Coaxial, Lens mountable R10 − 24 0.945 M3 R4 FD-EG31 16 17 Thru-beam Type High precision • Coaxial Lens mountable（FX-MR3、FX-MR6） Light emitting fiber element φ0.125 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type FD-EG3 Coaxial, Lens mountable R10 M3 − 20 0.787 M3 FD-EG31 16 17 Others M3 FD-EN500S1 FX-500 series Sleeve 15 mm φ0.5 15 15 R25 − − Coaxial Sleeve 15 mm 15 − 50 1.969 FD-EG30S W20×H30×D10 FD-F705 INDEX R4 (Protective ○ Liquid leak tube detection R20) R10 W6.5×H28.3×D17 φ0.8 15 7RXJK Liquid − detection SEMI S2 compliant W20×H30×D10 FD-F71 7RXJK Mountable on pipe • Array fiber FD-FA90 M3 Sleeve part cannot be bent. Sleeve part cannot be bent. SEMI S2 compliant φ0.8 15 R25 15 M3 Sleeve part cannot be bent. φ0.8 M3 FD-ENM1S1 FX-100 series Earlier models comparison table FD-EG30S Sleeve part cannot be bent. Amplifiers ・Cable lead out orientation changed 320 ・Metal casing material (brass) ⇒ 12.598 Changed to plastic (PPS) φ3 φ0.65 φ3 φ0.65 FD-E22 Fiber Dimensions 520 20.472 320 ・Cable lead out orientation changed ・Metal case material (brass) ⇒ 12.598 Changed to plastic (PPS) Sleeve part cannot be bent. Coaxia FD-EG1 ○ φ1.5 φ0.48 FD-E13 Sleeve part cannot be bent. Heatresistant R4 17 φ1.5 φ0.5 Retroreflective Type ○ M6 15 Convergent Reflective Type R2 W5×H20×D20 W5×H20×D20 Narrow Beam ○ 7RXJK Side sensing Small Spot R2 W5×H20×D20 W5×H20×D20 Flat Type ○ 7RXJK R25 FD-AFM2 200 7.874 R4 W7×H15×D30 W7×H15×D30 Top sensing Cylindrical Type Fiber Options Bending radius (mm) R4 (Protective ○ Liquid leak tube detection R20) Array fiber R4 FD-FA93 W6.5×H28.3×D17 ○ Liquid detection 81 Earlier Models Comparison Table Type Discontinued models Model No. Bending radius (mm) Shape of fiber head (mm) New product introduction Recommended replacements Bend- Sensing ing range dura- FX-500 bility STD (mm in) ➡ Model No. Shape of fiber head (mm) Bending radius (mm) Bend- Sensing Main points of difference from ing range discontinued models dura- FX-500 bility STD (mm in) 7RXJK M6 FD-61 Coaxial M6 R25 FD-FM2 − 420 16.535 20 R4 17 7RXJK Coaxial M6 R4 FD-61G 17 Sleeve 90 mm FD-FM2S M6 φ2.5 20 7RXJK R25 （Sleeve R10） − R25 （Sleeve R10） − 380 14.961 FD-61S 380 14.961 FD-61S M6 φ2.5 20 FD-G4 R25 M4 − 140 5.512 M6 φ2.5 FD-42G ・End bracket total length of 20 mm for the (M6 part/15 mm + ø3.5 area/5 mm) ⇒ Changed to 17 mm (M6 part/15 mm + ø4.5 area/2 mm) R4 （Sleeve R10） ○ R4 （Sleeve R10） ○ 420 ・The sleeve length 90 mm type 16.535 supports semi-custom products. M6 φ2.5 420 16.535 FD-G6 M3 − 140 5.512 R2 ○ 200 7.874 FD-G6X M3 R25 − 170 6.693 M3 R2 ○ 200 7.874 − ・Stainless steel mesh jacket 200 covering the stainless steel spiral tube used as a protective cover for 7.874 the fiber ⇒Changed to plastic (polyolefin) 17 Coaxial • Lens mountable Stainless-jacketed M3 W6×H18×D14 FD-L4 15.5 0.610 R25 − R10 1.5 to 16 − 0.059 to 0.630 R2 18 18 Wide Beam 7RXJK FD-L20H 23 0.906 Reflective type FD-L41 W24×H21×D4 R4 FD-L43 − 0 to 24 0 to 0.945 Heatresistant R2 R2 ○ 0 to 24 0 to 0.945 Fiber Options R4 ○ 0 to 9.5 0 to 0.374 Fiber Dimensions ○ 0 to 5 0 to 0.197 W17×H29×D3.8 7RXJK R10 FD-L44 − 0 to 9.5 0 to 0.374 Seating confirmation FD-L11 W12×H19×D3 W12×H19×D3 7RXJK Glass substrate detection • Seating confirmation R10 FD-L44S − 0 to 5 0 to 0.197 R4 FD-L10 7RXJK R4 − 0 to 40 0 to 1.575 FD-L30A R25 W23.5×H29×D4.5 Glass substrate detection • Mapping R25 4 to 44 − 0.157 to 1.732 1 to 56 − 0.039 to 2.205 W25×H7.3×D30 Glass substrate detection • Seating confirmation − FD-L31A W23.5×H29×D4.5 0 to 29 0 to 1.142 R25 12 φ1.48 ・Previous no flexing distance specifications ⇒ Specification wording changed to state flexing ±2 degrees (Reference: Discontinued model ±2 degrees specification is 10 mm to 32 mm) Mapping R4 FD-L32H ○ 0 to 56 0 to 2.205 ○ 0 to 29 0 to 1.142 − R25 （Sleeve R10） 120 4.724 − FX-500 series FX-100 series INDEX Seating confirmation R2 FD-L23 R2 ○ ・End bracket total length of 17 mm for 125 the (M4 part/12 mm + ø2.5 area/5 mm) 4.921 ⇒ Changed to 14 mm (M4 part/12 mm + ø2.5 area/2 mm) R2 （Sleeve R10） ○ 125 ・The sleeve length 90 mm type 4.921 supports semi-custom products. M4 FD-41 14 7RXJK 120 4.724 Amplifiers W25×H7.3×D30 7RXJK 17 FD-NFM2S Others W18×H29×D3.8 M4 M4 R4 4 to 33 ○ 0.157 to 1.299 Alignment 7RXJK R4 Sleeve 90 mm ○ W20×H29×D3.8 W18×H29×D3.8 FD-NFM2 0 to 43 0 to 1.693 R4 7RXJK Glass substrate detection • Alignment FD-L47 5HÀHFWLYH Type Alignment W20×H29×D3.8 FD-L46 5HWURUHÀHFWLYH Type W12×H19×D3 Glass substrate detection • Alignment FD-L45A Liquid Leak / Liquid Detection Thru-beam Type Seating confirmation W12×H19×D3 FD-L45 Vacuumresistant Alignment FD-L22A W17×H29×D3.8 Glass substrate detection • Seating confirmation Chemicalresistant 1.5 to 16 ○ 0.059 to 0.630 W24×H21×D4 7RXJK Glass substrate detection • Alignment Retroreflective Type ○ 7RXJK FD-L21 Convergent Reflective Type R2 W6×H18×D14 Glass substrate detection Super Quality Narrow Beam Coaxial • Lens mountable FD-32G FD-32GX Fibers Small Spot 17 Metal-jacketed Lens mountable（FX-MR3、FX-MR6） Coaxial Viewing new models Sleeve 25 7RXJK R25 Choose by shape/ application Flat Type 25 Lens mountable（FX-MR3、FX-MR6） Coaxial Choose by model Cylindrical Type Coaxial • Lens mountable M4 Fiber Selection Guide Threaded Type Sleeve 40 mm 20 7RXJK Minute objects can be detected due to the small spot beam. Coaxial • Lens mountable （FX-MR1/MR2/MR3/MR5/MR6） 420 ○ 16.535 Sleeve 40 mm 20 7RXJK Sleeve 40 mm FD-FM2S4 ○ ・End bracket total length of 20 mm for the (M6 part/15 mm + ø3.5 area/5 mm) 450 ⇒ Changed to 17 mm (M6 part/15 mm 17.717 + ø4.5 area/2 mm) ・Coaxial cable used for wiring ⇒ Changed to parallel type Tough Fiber Sleeve 40 mm M4 FD-41S 12 φ1.48 Earlier models comparison table 82 Earlier Models Comparison Table New product introduction Discontinued models Type Tough Fiber Model No. Fiber Selection Guide Shape of fiber head (mm) Sleeve 40 mm Choose by model FD-NFM2S4 Bending radius (mm) R25 （Sleeve − R10） M4 12 Choose by shape/ application Recommended replacements Bend- Sensing ing range dura- FX-500 bility STD (mm in) φ1.48 ➡ Model No. 7RXJK 120 4.724 Shape of fiber head (mm) Bending radius (mm) Bend- Sensing Main points of difference from ing range discontinued models dura- FX-500 bility STD (mm in) Sleeve 40 mm M4 FD-41S 12 R2 （Sleeve ○ R10） φ1.48 7RXJK Viewing new models φ1.5 R4 FD-P2 ○ 15 80 3.150 Fibers FD-S21 φ1.5 ○ ・Split amplifier insertion section configuration ⇒ Changed to integrated 80 light emitting/receiving configuration ・End bracket total length 15 mm ⇒ 3.150 Changed to 10 mm ・PVC outer covering material for fiber ⇒ Changed to PE R2 ○ ・End bracket shape is 12 mm for the M3 part only ⇒ Changed to a total length 125 of 12 mm (M3 part/10 mm + ø2 area/2 4.921 mm ) ・PVC outer covering material for fiber ⇒ Changed to PE R4 ○ R2 10 7RXJK Super Quality M3 R4 FD-P40 Threaded Type ○ 12 Cylindrical Type 45 1.772 FD-31 120 4.724 FD-S32 M3 12 7RXJK φ3 R4 FD-P50 Sleeve ○ 15 Flat Type φ3 15 15 R4 FD-P60 Narrow Beam ○ M4 120 4.724 Wide Beam M4 ○ ○ ・End bracket total length of 15 mm for 450 the M6 part only ⇒ Changed to 17 mm (M6 part/15 mm + ø4.5 area/2 mm) 17.717 ・PVC outer covering material for fiber ⇒ Changed to PE R4 − ・End bracket total length of 19 mm for the (M6 part/15 mm + crimped area/4 mm) ⇒ Changed to 22 mm (ø4.5 area/2 mm + M6 part/15 mm + crimped area/5 mm) 280 ・Split amplifier insertion section 11.024 configuration ⇒ Changed to integrated light emitting/receiving configuration ・Stainless steel mesh jacket covering the stainless steel spiral tube used as a protective cover for the fiber ⇒ Changed to plastic (polyolefin) R4 ○ 290 11.417 R4 ○ 420 16.535 R2 FD-41 FD-P80 M6 R4 Retroreflective Type ○ 280 11.024 14 M6 R4 FD-61 17 15 Chemicalresistant Heatresistant Vacuumresistant Reflective type FD-P81X Stainless-jacketed Metal-jacketed M6 R10 FD-64X 220 8.661 FD-R60 7RXJK 15 R25 − M6 Thru-beam Type R25 FD-S80 − 15 M6 FD-S32 15 0.8 R25 − 120 4.724 15 FD-V50 2.3 φ2 R4 ○ R2 ○ 125 4.921 ・End bracket shape is 8 mm for the ø2.5 part only ⇒ Changed to 10 mm (ø3 part/ 8 mm + ø2 area/2 mm) R2 ○ 125 4.921 ・End bracket shape is 12 mm for the M3 part only ⇒ Changed to a total length of 12 mm (M3 part /10 mm + ø2 area/2 mm) ○ ・End bracket shape is 12 mm for the M4 part only ⇒ Changed to a total length 450 of 17 mm (M6 part/15 mm + ø4.5 17.717 area/2 mm) ・Fiber cable outside diameter ø1.3 ⇒ Changed to ø2.2 R2 ○ ・End bracket total length is 12 mm for 125 the M4 part only ⇒ Changed to 14 mm (M4 part/12 mm + ø2.5 area/2 mm) 4.921 ・Fiber cable outside diameter ø1.3 ⇒ Changed to ø1 R2 ○ ・From sleeve end to optical axis 65 center position is 0.7 mm ⇒ Changed to 2 mm 2.559 ・End sleeve length of 10 mm ⇒ Changed to 15 mm 7RXJK φ2.5 R25 FD-SNFM2 − 8 120 4.724 FD-S31 120 4.724 FD-31 M3 10 7RXJK M3 R25 FD-T40 FX-100 series φ5 ・From sleeve end to optical axis center position is 0.8 mm ⇒ 120 Changed to 2.3 mm 4.724 ・A D-shaped surface that makes it easy to align with the optical axis has been added 20 Sleeve part cannot be bent. Sleeve part cannot be bent. Amplifiers φ3 7RXJK φ5φ2 Others FX-500 series 380 14.961 15 20 FD-SFM2SV2 15 7RXJK φ3 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type 22 15 FD-R80 Fiber Dimensions M6 270 − 10.630 − 12 M3 12 7RXJK M6 R4 FD-61 INDEX 17 M4 R25 FD-T80 − 12 380 14.961 7RXJK M4 Earlier models comparison table FD-41 14 15 10 FD-V41 φ3 φ1.5 ・End bracket total length of 15 mm for the (M4 part/12 mm + ø3 area/3 mm) ⇒ Changed to 14 mm (M4 part/12 mm + ø2.5 area/2 mm) ・PVC outer covering material for fiber ⇒ Changed to PE 125 4.921 7RXJK Convergent Reflective Type Fiber Options 420 ・PVC outer covering material for 16.535 fiber ⇒ Changed to PE 7RXJK Small Spot Liquid Leak / Liquid Detection 125 4.921 7RXJK Small diameter 0.7 Sleeve part cannot be bent. R25 − 65 2.559 FD-V30 Small diameter 15 15 φ3 φ1.5 2 Sleeve part cannot be bent. 83 Earlier Models Comparison Table Type Discontinued models Model No. Bending radius (mm) Shape of fiber head (mm) Recommended replacements Bend- Sensing ing range dura- FX-500 bility STD (mm in) ➡ Model No. 7RXJK R1 （Sleeve − R10） M4 φ1.48 12 Shape of fiber head (mm) M4 7RXJK R1 （Sleeve − R10） φ1.48 − 15 ・End bracket total length is 15 mm for the M6 part only ⇒ Changed to 17 mm (M6 part/ 15 mm + ø4.5 area/2 mm) R1 270 − 10.630 ・End bracket total length is 15 mm for the M6 part only ⇒ Changed to 17 mm (M6 part/ 15 mm + ø4.5 area/2 mm) R2 200 7.874 17 7RXJK FD-WG4 Minute objects can be detected due to the small spot beam. Coaxial • Lens mountable （FX-MR1/MR2/MR3/MR5/MR6） M4 FD-42G R2 − ○ Sleeve M4 150 5.906 R1 − R1 10 to 650 ・Stainless steel unit casing material − 0.394 to ⇒ Changed to plastic (PC) 25.591 R2 1.5 to 16 ○ 0.059 to 0.630 R1 3 to 14 0.118 to 0.551 Small Spot 25 R1 FD-WKZ1 W5.2×H9.5×D15 20 to 490 − 0.787 to 19.291 W5.2×H9.5×D15 FD-Z50HW 7RXJK FD-L21 Glass substrate detection R1 FD-WL41 W24×H21×D4 2.5 to 14 − 0.098 to 0.551 W24×H21×D4 FD-L21W − Reflective type W24×H21×D4 R1 FD-WL48 − W7.2×H7.5×D2 7.5 0.295 FD-L12W R1 FD-WS8 − 15 250 9.843 φ3 Coaxial φ3 R2 − 150 5.906 420 16.535 R1 − 270 10.630 R1 − 150 5.906 R2 ○ 125 4.921 ・End bracket total length is 12 mm for the M3 part only ⇒ Changed to 12 mm (M3 part/ 10 mm + ø2 area /2 mm) 5HWURUHÀHFWLYH Type − 80 3.150 ・End bracket total length is 12 mm for the M3 part only ⇒ Changed to 12 mm (M3 part/ 10 mm + ø2 area/ 2 mm) Others R1 ○ 125 4.921 ・End bracket total length is 12 mm for the M4 part only ⇒ Changed to 14 mm (M4 part/12 mm + ø3 area/ 2 mm) Amplifiers R2 R1 270 − 10.630 ・End bracket total length is 12 mm for the M4 part only ⇒ Changed to 14 mm (M4 part/12 mm + ø3 area/ 2 mm) 7RXJK M3 R1 FD-WT4 − 12 M3 12 80 3.150 FD-31W M3 12 7RXJK M4 FD-41 M4 R1 FD-WT8 − 14 14 250 9.843 M4 FD-41W 14 7RXJK FD-V30 φ3 φ2 2 R2 ○ Sleeve part cannot be bent. 15 15 FD-WV42 Small diameter 15 15 φ3 φ1.5 1 R1 − 16 0.630 Sleeve part cannot be bent. FD-V30W 15 φ3 15 φ1.5 2 Sleeve part cannot be bent. Heatresistant ○ 15 FD-31 Chemicalresistant R4 Coaxial φ3 15 Retroreflective Type 8 0.315 φ3 FD-S33GW Convergent Reflective Type − 15 FD-WSG4 Wide Beam R1 15 FD-S32W Narrow Beam Vacuumresistant W7.2×H7.5×D2 7RXJK FD-S32 φ3 Threaded Type Flat Type Coaxial • Lens mountable FD-42GW Long sensing range • Rectangular head Super Quality Cylindrical Type Coaxial • Lens mountable M4 Fibers 25 150 5.906 25 Viewing new models 450 17.717 M6 FD-61W 80 3.150 ○ 17 250 9.843 Fiber Selection Guide Choose by model R4 M6 FD-61 R1 Tough Fiber Choose by shape/ application M4 12 M6 125 4.921 Sleeve 40 mm FD-41SW FD-W8 Bend- Sensing Main points of difference from ing range discontinued models dura- FX-500 bility STD (mm in) R2 （Sleeve ○ R10） φ1.48 12 80 3.150 Bending radius (mm) Sleeve 40 mm FD-41S Sleeve 40 mm FD-W44 New product introduction R1 − Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions Thru-beam Type ・From sleeve end to optical axis center position is 1 mm ⇒ Changed to 2 mm 65 ・End sleeve thickness of ø2 ⇒ Changed to ø1.5 2.559 ・A D-shaped surface that makes it easy to align with the optical axis has been added ・From sleeve end to optical axis center position is 1 mm ⇒ Changed to 2 mm 20 ・End sleeve thickness of ø2 ⇒ Changed to ø1.5 0.787 ・A D-shaped surface that makes it easy to align with the optical axis has been added 5HÀHFWLYH Type FX-500 series FX-100 series INDEX Earlier models comparison table 84 Earlier Models Comparison Table New product introduction Discontinued models Type Tough Fiber Model No. Fiber Selection Guide Choose by shape/ application Viewing new models Bend- Sensing ing range dura- FX-500 bility STD (mm in) R1 2.5 to 65 − 0.098 to 2.559 Fiber bending type Reflective type Choose by model Shape of fiber head (mm) FD-WZ4HB W2×H10×D10 Fiber bending type R1 FD-WZ7HB Recommended replacements Bending radius (mm) W3.5×H14×D11 1 to 150 − 0.039 to 5.906 FR-KV1 Sleeve Flat Type Retroreflective type Cylindrical Type − R10 20 to 200 − 0.787 to 7.874 FR-KZ21 R10 20 to 200 − 0.787 to 7.874 R1 100 to 990 − 3.937 to 38.976 W10.6×H28×D10.1 W10.6×H28×D10.1 W9.5×H5.2×D15 FR-WKZ11 W30×H30×D0.5 Wide Beam FT-A30 Retroreflective Type Sensing width 32 mm R10 − W5×H69×D20 Chemicalresistant FT-A8 W4.2×H31×D13.5 Top sensing 3600 141.732 R10 3600 − 141.732 R25 − Vacuumresistant Liquid Leak / Liquid Detection W5×H15×D15 FT-AFM2 860 33.858 Side sensing W5×H15×D15 Fiber Options FT-B8 Others FD-Z40HBW − 260 10.236 R2 ○ 15 to 310 ・Unit side installation screw 0.591 to positions have been moved back 1 12.205 mm from the front edge R2 ○ 20 to 300 0.787 to 11.811 R2 ○ 20 to 300 0.787 to 11.811 R1 ○ 100 to 990 3.937 to 38.976 R2 ○ ・Fiber cable outside diameter ø2.2 3600 ⇒ Changed to ø1.3 141.732 ・Optical cable diameter of 3 × 32 ⇒ Changed to 3.2 × 32 R2 ○ 3600 ・Fiber cable outside diameter ø2.2 141.732 ⇒ Changed to ø1.3 R2 ○ 860 ・Cable lead out orientation changed ・Metal casing material (brass) ⇒ 33.858 Changed to plastic (PPS) R2 ○ 860 ・Cable lead out direction changed ・Metal casing material (brass) ⇒ 33.858 Changed to plastic (PPS) R4 ○ W7.5×H2.2×D11.2 FR-KZ22E 7RXJK W9.5×H5.2×D21 FR-KZ50H W10.6×H28×D10.1 7RXJK W9.5×H25×D5.2 FR-KZ50E W28×H10.6×D10.1 W5.2×H9.5×D16 FR-Z50HW W30×H30×D0.5 FT-A32 − 860 33.858 Sensing width 32 mm W5×H69×D20 FT-A11 7RXJK FT-AL05 Sensing width 11 mm W4.2×H31×D13.5 Sensing width 5.5 mm W5×H15×D15 7RXJK FT-AL05 Sensing width 5.5 mm W5×H15×D15 Lens mountable Lens mountable （FX-LE1/LE2/SV1） M4 R25 − 1250 49.213 M4 FT-43 15 Beam dia. φ0.125 mm φ0.25 φ3 FT-E12 Sleeve part cannot be bent. ○ R2 ○ ・Set length type ⇒ Changed to free cut type 75 ・Fiber cable outside diameter ø1.2 ⇒ Changed to ø1 2.953 ・End bracket length of 10 mm ⇒ Changed to 15 mm R2 (Protective tube R20) ○ Liquid detection R4 ○ 19600 771.654 R4 ○ 1130 44.488 φ0.25φ3 R5 − − R2 FT-E13 Beam dia. φ0.25 mm 5 15 7RXJK φ0.4φ3 5 10 Amplifiers FT-F902 FX-100 series Mountable on pipe SEMI S2 compliant W23×H20×D17 R5 − − FT-E23 5 15 Sleeve part cannot be bent. 7RXJK R4 (Protective tube R20) Liquid ○ detection R25 19600 − 771.654 M14 SEMI S2 compliant W23×H20×D17 FT-F93 7RXJK With lens FT-FM10L Beam dia. φ0.25 mm φ0.4φ3 Sleeve part cannot be bent. With long range lens M14 FT-140 40 23 INDEX 7RXJK Lens mountable （FX-LE1/LE2/SV1） M4 FT-FM2 R25 − 1100 43.307 Lens mountable M4 FT-42 15 15 Earlier models comparison table Sleeve 90 mm M4 FT-FM2S φ1.48 12 Sleeve 40 mm M4 FT-FM2S4 φ1.48 12 7RXJK R25 1100 （Sleeve − 43.307 R10） FT-42S R25 1100 （Sleeve − 43.307 R10） FT-42S Sleeve 40 ｍｍ R4 1130 ・The sleeve length 90 mm type （Sleeve ○ 44.488 supports semi-custom products. R10） 12 M4 φ1.48 7RXJK 1400 55.118 ・Fiber length 500 mm /set length type ⇒ Changed to fiber length 1 m/free cut type 15 ・Fiber cable outside diameter ø1.2 ⇒ 0.591 Changed to ø1 ・End bracket length of 10 mm ⇒ Changed to 15 mm Beam dia. φ0.125 mm Sleeve part cannot be bent. FT-E22 FX-500 series R1 W3.5×H14×D11 7RXJK Thru-beam type 5HÀHFWLYH Type 2 to 85 − 0.079 to 3.346 W2×H10×D10 15 Thru-beam Type 5HWURUHÀHFWLYH Type R25 FT-AFM2E Fiber Dimensions R1 Fiber bending type 7RXJK Wide area sensing Sensing width 11 mm Heatresistant FD-Z20HBW Bend- Sensing Main points of difference from ing range discontinued models dura- FX-500 bility STD (mm in) 7RXJK Wide area sensing Convergent Reflective Type Bending radius (mm) W4×H2×D21.5 W9.5×H25×D5.2 FR-KZ21E Shape of fiber head (mm) Fiber bending type W4×H2×D21.5 W9.5×H5.2×D21 Small Spot Narrow Beam 20 to 310 0.787 to 12.205 R10 Super Quality Threaded Type Model No. 7RXJK W7.5×H2.2×D11.2 Fibers ➡ Sleeve 40 ｍｍ M4 φ1.48 R4 1130 （Sleeve ○ 44.488 12 R10） 85 Earlier Models Comparison Table Type Discontinued models Shape of fiber head (mm) Model No. φ3.5 φ3.7 FT-K8 Recommended replacements Bending radius (mm) Bend- Sensing ing range dura- FX-500 bility STD (mm in) R25 3600 − 141.732 20 ➡ Model No. Shape of fiber head (mm) 7RXJK FT-KS40 R10 2 540 − 21.260 FT-KV26 2 R25 − 3 3600 141.732 FT-KV40 3 M3 R25 − 15 10 Sleeve 40 mm M3 FT-NFM2S4 φ0.88 10 310 12.205 M3 FT-31 7RXJK FT-31S R25 310 （Sleeve − 12.205 R10） FT-31S 330 12.992 FT-S21 7RXJK Sleeve 40 ｍｍ M3 φ0.88 ○ 10 10 Sleeve 40 ｍｍ M3 φ0.88 7RXJK R4 R2 12 R25 310 （Sleeve − 12.205 R10） φ1.5 FT-P2 R2 ・Fiber cable outside diameter ø2.2 ⇒ Changed to ø1 3600 ・Metal end material (stainless steel) ⇒ ○ 141.732 Changed to plastic (LCP), set screw fastening specifications ⇒ Changed to MS-FD-3 fastener specifications 7RXJK FT-NFM2 φ0.88 ○ 25 25 10 φ1.5 R2 （Sleeve ○ R10） 315 ・The sleeve length 90 mm type 12.402 supports semi-custom products. R2 （Sleeve ○ R10） 315 12.402 R4 FT-P40 ○ 10 160 6.299 ・Fiber length 1 m/Set length type ⇒ 315 Changed to fiber length 2 m/free cut type 12.402 ・Fiber exterior cover material of PVC ⇒ Changed to PE R2 ○ ・End bracket total length of 10 mm for 315 the M3 part ⇒ Changed to 12 mm (M3 part/10 mm + ø2 area/2 mm) 12.402 ・Fiber exterior cover material of PVC ⇒ Changed to PE R4 ・Fiber exterior cover material of 1130 PVC ⇒ Changed to PE ○ 44.488 ・Fiber cable outside diameter ø1.25 ⇒ Changed to ø2.2 M4 R4 Thru-beam type FT-P60 ○ 350 13.780 Lens mountable M4 FT-42 15 15 7RXJK Lens mountable（FX-LE1/LE2/SV1） M4 FT-P80 R4 ○ 810 31.890 Lens mountable M4 R4 FT-42 M4 FT-P81X R10 − φ1 R4 ○ 6 880 34.646 90 3.543 − ・Stainless steel mesh jacket covering 1200 the stainless steel spiral tube used as 47.244 a protective cover for the fiber ⇒ Changed to plastic (polyolefin) M4 R4 FT-45X 20 7RXJK FT-S11 14 R25 − φ1 780 30.709 FT-R40 R25 − 1100 43.307 FT-S32 8 φ2.5 − 2600 102.362 FT-S32 8 570 22.441 FT-V30 0.8 Sleeve part cannot be bent. R25 − φ1.5 R25 FT-SNFM2 − 8 310 12.205 R10 ○ 3100 122.047 ○ ・From sleeve end to optical axis center 680 position is 0.8 ⇒ Changed to 1.3 mm 26.772 ・D-shaped surface that makes it easy to align with the optical axis has been added FX-100 series R4 R2 ○ 315 ・End bracket total length of ø1.5 /8 mm ⇒ Changed to 12 mm (ø1 12.402 area/2 mm + ø1.5/8 mm) INDEX R4 ・End bracket total length of 12.5 mm for the (M2.6 part/2.5 mm + M3 part/10 1130 mm) ⇒ Changed to 15 mm (M2.6 part ○ 44.488 /3 mm + M4 part/12 mm) ・Fiber cable outside diameter ø1.3 ⇒ Changed to ø2.2 R4 ○ 10 7RXJK Lens mountable （FX-LE1/SV1） M3 FT-T80 R25 − Lens mountable M4 1100 43.307 FT-42 3500 137.795 FT-V40 15 12.5 7RXJK φ4 FT-V10 R25 3 25 − φ4 3 25 Fiber Options ・End bracket total length of 14 mm for the (M2.6 part/3 mm + M4 part/11 mm) ⇒ Changed to 15 mm (M2.6 part/3 mm + M4 part/12 mm) 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type Others 20 15 φ1.5 Liquid Leak / Liquid Detection 3100 ・Optical cable diameter of ø1 ⇒ 122.047 Changed to ø2.2 φ1.5φ2.5 FT-S21 Vacuumresistant ○ 8 7RXJK Heatresistant R10 φ2.5 Sleeve part cannot be bent. Chemicalresistant 930 36.614 8 20 15 Retroreflective Type ○ φ2.5 1.3 Convergent Reflective Type R4 15 7RXJK φ1.5φ2.5 FT-SFM2SV2 Wide Beam Thru-beam Type Long sensing range • with lens R25 Sleeve Flat Type ○ M4 Long sensing range • with lens FT-SFM2L Cylindrical Type Fiber Dimensions Long sensing range • with lens φ2.5 FT-SFM2 Threaded Type R2 Lens mountable M4 Super Quality 90 3.543 6 7RXJK Lens mountable（FX-LE1/LE2） FT-R80 1130 ・Fiber exterior cover material of 44.488 PVC ⇒ Changed to PE Lens mountable • Stainless-jacketed 20 FT-PS1 ○ 15 15 Lens mountable（FX-LE1/LE2/SV1） Metal-jacketed Fibers Narrow Beam ○ 12 7RXJK Lens mountable（FX-LE1/LE2/SV1） M3 FT-31 Choose by model Small Spot R2 10 Fiber Selection Guide Viewing new models ・End bracket total length of 15 mm for 315 the (M3 part/10 mm + ø2 area/5 mm ○ 12.402 ⇒ Changed to 12 mm (M3 part/10 mm + ø2 area/2 mm) 7RXJK M3 710 27.953 R2 20 Tough Fiber Choose by shape/ application 1.5×2 φ4 FT-KV8 M3 R2 3600 ・Fiber cable outside diameter ø2.2 ○ 141.732 ⇒ Changed to ø1 7RXJK Side-view type with small light dispersion φ4 FT-NFM2S Bend- Sensing Main points of difference from ing range discontinued models dura- FX-500 bility STD (mm in) 20 20 Sleeve 90 mm Bending radius (mm) φ3.5 φ3.7 7RXJK W2×H1.5×D20 FT-KV1 New product introduction 3500 137.795 Amplifiers FX-500 series Earlier models comparison table 86 Earlier Models Comparison Table New product introduction Discontinued models Type Tough Fiber Model No. Shape of fiber head (mm) Bending radius (mm) Fiber Selection Guide Recommended replacements Bend- Sensing ing range dura- FX-500 bility STD (mm in) ➡ Model No. Shape of fiber head (mm) Bending radius (mm) Bend- Sensing Main points of difference from ing range discontinued models dura- FX-500 bility STD (mm in) 7RXJK Choose by model φ1 φ2 FT-V22 Choose by shape/ application ○ R2 ○ ・End bracket outside diameter of 240 ø2.5 ⇒ Changed to ø2 ・From sleeve end to optical axis 9.449 center position is 0.6 ⇒ Changed to 1 mm R2 ・End bracket total length of 15 mm for the (M3 part/10 mm + crimped 315 area/5 mm) ⇒ Changed to 12 mm ○ 12.402 (ø2 area/2 mm + M3 part/10 mm) ・Fiber cable outside diameter ø2.2 ⇒ Changed to ø1 R1 260 − 10.236 R4 ○ 1130 44.488 R1 − 800 31.496 R2 ○ ・Fiber cable outside diameter ø2.2 ⇒ 3600 Changed to ø1.3 141.732 ・Optical cable diameter of 3 × 32 ⇒ Changed to 3.2 × 32 R1 − ・Fiber cable outside diameter ø2.2 ⇒ 3600 Changed to ø1.3 141.732 ・Optical cable diameter of 3 × 32 ⇒ Changed to 3.2 × 32 R2 ○ 3600 ・Fiber cable outside diameter ø2.2 141.732 ⇒ Changed to ø1.3 R1 − 3600 Fiber cable outside diameter ø2.2 141.732 ⇒ Changed to ø1.3 R2 ・Fiber cable outside diameter ø2.2 ⇒ Changed to ø1 3600 ・Metal end material (stainless steel) ⇒ ○ Changed to plastic (LCP), set screw 141.732 fastening specifications ⇒ Changed to MS-FD-3 fastener specifications R1 ・Fiber cable outside diameter ø2.2 ⇒ Changed to ø1 3600 ・Metal end material (stainless steel) ⇒ − Changed to plastic (LCP), set screw 141.732 fastening specifications ⇒ Changed to MS-FD-3 fastener specifications R1 − 800 31.496 R1 − 2200 86.614 R1 − 800 ・End bracket total length of 15 mm 31.496 ⇒ Changed to 10 mm φ1 φ2 0.6 Sleeve part cannot be bent. ・Fiber length 1 m/Set length type ⇒ Changed to fiber length 2 m/free cut type 450 ・From sleeve end to optical axis center 17.717 position is 0.6 ⇒ Changed to 1.1 mm ・D-shaped surface that makes it easy to align with the optical axis has been added R25 − 300 11.811 1.1 FT-V23 R4 Sleeve part cannot be bent. 20 15 20 15 Viewing new models 7RXJK φ1 φ2.5 FT-V41 0.6 Sleeve part cannot be bent. Fibers R25 − 200 7.874 1 FT-V25 Sleeve part cannot be bent. 10 15 Super Quality φ1 φ2 15 15 7RXJK Threaded Type M3 FT-31 Cylindrical Type 12 M3 R1 FT-W4 Sleeve − 15 250 9.843 Flat Type M3 FT-31W Small Spot 12 Narrow Beam 7RXJK Wide Beam Convergent Reflective Type M4 FT-W8 R10 − M4 15 7RXJK Heatresistant Sensing width 32 mm FT-A32 Thru-beam type Fiber Options Lens mountable FT-42W Chemicalresistant Liquid Leak / Liquid Detection M4 15 790 31.102 15 Retroreflective Type Vacuumresistant Lens mountable FT-42 Lens mountable （FX-LE1/LE2/SV1） W5×H69×D20 FT-WA30 Sensing width 32 mm R1 W5×H69×D20 3600 − 141.732 Sensing width 32 mm FT-A32W W5×H69×D20 7RXJK Sensing width 11 mm FT-A11 Fiber Dimensions Thru-beam Type Sensing width 11 mm R1 FT-WA8 − W4.2×H31×D13.5 W4.2×H31×D13.5 3600 141.732 5HWURUHÀHFWLYH Type Sensing width 11 mm FT-A11W W4.2×H31×D13.5 5HÀHFWLYH Type 7RXJK Others φ4 FT-KV40 Amplifiers φ4 R1 FT-WKV8 − 3 FX-500 series FT-KV40W R1 FT-WR80 − W7×H9×D13.9 3 25 M4 660 25.984 FT-R41W 2200 86.614 FT-R42W W7×H9×D13.9 With lens With long range lens M4 R1 FT-WR80L − W7×H9×D14.6 FT-WS3 25 φ4 25 M4 Earlier models comparison table 3 3600 141.732 FX-100 series INDEX ・End bracket total length of 15 mm for the (M3 part/10 mm + crimped area/5 mm) ⇒ Changed to 12 mm (ø2 area/2 mm + M3 part/10 mm) ・Fiber cable outside diameter ø2.2 ⇒ Changed to ø1 φ3 15 M4 W7×H9×D14.4 R1 − 790 31.102 FT-S31W φ3 10 87 Earlier Models Comparison Table Type Discontinued models Model No. Shape of fiber head (mm) Bending radius (mm) New product introduction Recommended replacements Bend- Sensing ing range dura- FX-500 bility STD (mm in) ➡ Model No. Shape of fiber head (mm) 7RXJK φ1.5 FT-S21 φ1.5 FT-WS4 R1 − 8 Bending radius (mm) Bend- Sensing Main points of difference from ing range discontinued models dura- FX-500 bility STD (mm in) R2 315 ・End bracket shape of ø1.5/8 mm ○ ⇒ Changed to 10 mm (ø1 part/2 12.402 mm + ø1.5 part/8 mm) R1 260 ・End bracket shape of ø1.5/8 mm − ⇒ Changed to 10 mm (ø1 part/2 10.236 mm + ø1.5 part/8 mm) R1 − 10 250 9.843 φ1.5 FT-S21W 10 φ2.5 R1 FT-WS8 − 8 790 31.102 10 Long sensing range • with lens Long sensing range • with lens φ3 R1 FT-WS8L φ3 FT-S31W − 8 3300 129.921 φ2.5 FT-S32 FT-V25 φ1 φ2 1 R1 − 15 15 Sleeve part cannot be bent. Sleeve part cannot be bent. 100 3.937 FT-V24W W2×H10×D10 R1 − 210 8.268 15 15 φ1 φ2 1 − 790 31.102 R1 Thru-beam type FT-Z40HBW Top sensing W8.5×H12×D3 R1 − 1300 51.181 W3×H12×D8 Side sensing R2 2100 ・Black casing color ⇒ Changed to ○ translucent, protective seal 82.677 eliminated R1 3400 − 133.858 Side sensing 7RXJK R1 − 3300 129.921 Top sensing Top sensing 7RXJK W8.5×H12×D3 R4 ○ 1200 47.244 W3×H12×D8 2000 78.740 R4 ○ R4 2100 ○ 82.677 Top sensing FT-Z30H Super Quality Threaded Type Cylindrical Type Sleeve Flat Type Small Spot Narrow Beam Wide Beam Convergent Reflective Type Retroreflective Type Chemicalresistant Heatresistant Side sensing Top sensing Liquid Leak / Liquid Detection R2 ○ 3500 137.795 Fiber Options R1 − 3400 133.858 R2 3500 ○ 137.795 Fiber Dimensions Thru-beam Type 5HWURUHÀHFWLYH Type 5HÀHFWLYH Type R1 − 3500 137.795 Others R2 ○ 2100 ・Black casing color ⇒ Changed to translucent, protective seal 82.677 eliminated Amplifiers W8.5×H12×D3 FX-500 series W3×H12×D8 FT-Z30E 7RXJK Top sensing Fibers 1500 ・Black casing color ⇒ Changed to translucent, protective seal 59.055 eliminated W3×H8×D12 FT-Z30 7RXJK Side sensing Viewing new models − W3×H8×D12 FT-Z30HW Top sensing Choose by shape/ application W3×H12×D8 FT-Z30H Top sensing Choose by model R1 W3×H12×D8 FT-Z30EW FT-Z8H − Fiber Selection Guide Vacuumresistant FT-Z30E Side sensing W3×H8×D12 R1 800 31.496 W8.5×H12×D3 7RXJK FT-Z8E 260 10.236 Top sensing FT-Z30W FT-Z8 − W8.5×H12×D3 FT-Z30 Top sensing FT-WZ8H R1 W3.5×H14×D11 7RXJK W3×H8×D12 110 ・D-shaped surface that makes it easy to align with the optical axis 4.331 has been added − Fiber bending type W3.5×H14×D11 FT-WZ8E 240 ・D-shaped surface that makes it easy to align with the optical axis 9.449 has been added R1 15 15 W2×H10×D10 FT-Z20HBW Fiber bending type FT-WZ8 ○ ・End bracket shape of ø3 ⇒ 3100 Changed to ø2.5 ・ 122.047 Bending radius of 1 mm ⇒ Changed to 10 mm Fiber bending type Fiber bending type FT-WZ7HB R2 φ1 φ2 1 Sleeve part cannot be bent. FT-WZ4HB ○ 8 7RXJK FT-WV42 R10 800 ・End bracket shape of ø2.5/8 mm ⇒ Changed to 10 mm (ø2 part/2 31.496 mm + ø3 part/8 mm) Tough Fiber R2 ○ 3500 137.795 FX-100 series R2 ○ 3500 137.795 INDEX W3×H8×D12 Earlier models comparison table 88 ワㄆㄘチヱㄓㄐㄅㄖ㄄ㄕ ヤㄐㄎㄎㄖㄏㄊ㄄㄂ㄕㄊㄐㄏチヶㄏㄊㄕチㄇㄐㄓチヰㄑㄆㄏチワㄆㄕㄘㄐㄓㄌ ヵㄉㄆチㄅㄊㄈㄊㄕ㄂ㄍチㄔㄆㄏㄔㄐㄓチ㄄㄂ㄏチ㄃ㄆチ㄄ㄐㄏㄏㄆ㄄ㄕㄆㄅチㄅㄊㄓㄆ㄄ㄕㄍㄚチ ㄕㄐチㄕㄉㄆチピチㄕㄚㄑㄆㄔチㄐㄇチㄐㄑㄆㄏチㄏㄆㄕㄘㄐㄓㄌヂ ヰㄕㄉㄆㄓチㄕㄚㄑㄆㄔチㄐㄇチ㄂ㄏ㄂ㄍㄐㄈチㄊㄏㄑㄖㄕチㄔㄆㄏㄔㄐㄓㄔチ㄄㄂ㄏチ㄂ㄍㄔㄐチ㄃ㄆチ㄄ㄐㄏㄏㄆ㄄ㄕㄆㄅヂ ヰㄏチㄔ㄂ㄍㄆチㄔㄐㄐㄏ ヴ㄄㄂ㄕㄕㄆㄓㄆㄅチㄅㄊㄈㄊㄕ㄂ㄍチㄔㄆㄏㄔㄐㄓㄔチ㄄㄂ㄏチ㄃ㄆチ㄄ㄆㄏㄕㄓ㄂ㄍㄍㄚチㄎ㄂ㄏ㄂ㄈㄆㄅチ㄂ㄏㄅチㄔㄆㄕチㄕㄉㄓㄐㄖㄈㄉチ㄂ㄏチㄐㄑㄆㄏチㄏㄆㄕㄘㄐㄓㄌハ モㄑㄑㄍㄊ㄄㄂㄃ㄍㄆ ュㄊㄈㄊㄕ㄂ㄍチヴㄆㄏㄔㄐㄓ ヱㄍㄆ㄂ㄔㄆチ㄄ㄐㄏㄕ㄂㄄ㄕチハハハハハハハハハハ ュㄊㄈㄊㄕ㄂ㄍチョㄊ㄃ㄆㄓチヴㄆㄏㄔㄐㄓ ュㄊㄈㄊㄕ㄂ㄍチロ㄂ㄔㄆㄓチヴㄆㄏㄔㄐㄓ ュㄊㄈㄊㄕ㄂ㄍチヱㄓㄆㄔㄔㄖㄓㄆチヴㄆㄏㄔㄐㄓ ヱ㄂ㄏ㄂ㄔㄐㄏㄊ㄄チユㄍㄆ㄄ㄕㄓㄊ㄄チヸㄐㄓㄌㄔチヴヶワヹチヤㄐハネチロㄕㄅハ ビフピヒノヒチヶㄔㄉㄊㄚ㄂ㄎ㄂ノ㄄ㄉㄐネチレ㄂ㄔㄖㄈ㄂ㄊノㄔㄉㄊネチモㄊ㄄ㄉㄊネチフベプノパペパヒネチル㄂ㄑ㄂ㄏ ƛ ヵㄆㄍㄆㄑㄉㄐㄏㄆホチヌベヒノブプベノピピノヘビヒヒチ ƛ ョ㄂㄄ㄔㄊㄎㄊㄍㄆホチヌベヒノブプベノピピノビプピヒ ヨㄍㄐ㄃㄂ㄍチヴ㄂ㄍㄆㄔチデチヮ㄂ㄓㄌㄆㄕㄊㄏㄈチュㄊㄗㄊㄔㄊㄐㄏ ƛ ヵㄆㄍㄆㄑㄉㄐㄏㄆホチヌベヒノブプベノピピノヘベプヒチ ƛ ョ㄂㄄ㄔㄊㄎㄊㄍㄆホチヌベヒノブプベノピピノベブペヒ ㄑ㄂ㄏ㄂ㄔㄐㄏㄊ㄄ノㄆㄍㄆ㄄ㄕㄓㄊ㄄ノㄘㄐㄓㄌㄔハㄏㄆㄕバㄔㄖㄏㄙ モㄍㄍチンㄊㄈㄉㄕㄔチンㄆㄔㄆㄓㄗㄆㄅチ チヱ㄂ㄏ㄂ㄔㄐㄏㄊ㄄チユㄍㄆ㄄ㄕㄓㄊ㄄チヸㄐㄓㄌㄔチヴヶワヹチヤㄐハネチロㄕㄅハチビパヒヒ ワㄐハチヤユノョリャユンヨヶリュユノヘチヰ㄄ㄕㄐ㄃ㄆㄓネチビパヒヒ ヴㄑㄆ㄄ㄊㄇㄊ㄄㄂ㄕㄊㄐㄏㄔチ㄂ㄓㄆチㄔㄖ㄃ㄋㄆ㄄ㄕチㄕㄐチ㄄ㄉ㄂ㄏㄈㄆチㄘㄊㄕㄉㄐㄖㄕチㄏㄐㄕㄊ㄄ㄆハ ヱㄓㄊㄏㄕㄆㄅチㄊㄏチル㄂ㄑ㄂ㄏ