HJ2-AC220/240V-6

TÜV Rheinland To Be Discontinued Last time buy: September 30, 2018 RoHS compliant Relay for control panel of 2c 7A and 4c 5A HJ RELAYS FEATURES TYPICAL APPLICATIONS 1. Economical prices achieved 2. Useful for wide range of applications Gold-plated contact types are capable of switching under low level (1mA: reference value) to powerful high level (7A: 2-pole) loads. 3. Wide range of types available The lineup includes 2-pole and 4-pole products, relays with operating indicator lights, and push-button types. You will also find relays that absorb surge when the coil goes to the off state with diodes (for DC type) or CR circuits (for AC type). Moreover, the availability of a broad range of coil voltages meets a wide range of needs. 4. Sockets and terminal sockets are available. Control panels Power supply units Molding machines Machine tools Welding equipment Agricultural equipment Office equipment Vending machines Communications equipment Amusement machines ORDERING INFORMATION HJ Contact arrangement 2: 2 Form C 4: 4 Form C Operation indication Nil: Without LED indication L: With LED indication Test button Nil: Without a test button T: With a test button Nominal coil voltage AC 12, 24, 48, 100, 120, 200, 220/240 V DC 12, 24, 48, 110 V Surge suppression Nil: Without D: With diode R: With CR circuit Contact surface Nil: Without Au plating 6: With Au plating Notes: 1. Certified by UL/C-UL and TÜV 2. The LED indication color is green for the DC coil and red for the AC coil. –1– ASCTB6E 201709-T To Be Discontinued Last time buy: September 30, 2018 HJ TYPES 1. Au plating type 1) Plug-in type Nominal coil voltage 12V DC 24V DC 48V DC 100/110V DC 12V AC 24V AC 48V AC 100/110V AC 110/120V AC 200/220V AC 220/240V AC 2) Plug-in type (with LED indication) 2 Form C Part No. HJ2-DC 12V-6 HJ2-DC 24V-6 HJ2-DC 48V-6 HJ2-DC110V-6 HJ2-AC 12V-6 HJ2-AC 24V-6 HJ2-AC 48V-6 HJ2-AC100V-6 HJ2-AC120V-6 HJ2-AC200V-6 HJ2-AC220/240V-6 4 Form C Part No. HJ4-DC 12V-6 HJ4-DC 24V-6 HJ4-DC 48V-6 HJ4-DC110V-6 HJ4-AC 12V-6 HJ4-AC 24V-6 HJ4-AC 48V-6 HJ4-AC100V-6 HJ4-AC120V-6 HJ4-AC200V-6 HJ4-AC220/240V-6 Standard packing: Carton: 20 pcs.; Case: 200 pcs. 12V DC 24V DC 48V DC 100/110V DC 2 Form C Part No. HJ2-DC 12V-D-6 HJ2-DC 24V-D-6 HJ2-DC 48V-D-6 HJ2-DC110V-D-6 100/110V AC 110/120V AC 200/220V AC 220/240V AC 12V DC 24V DC 48V DC 100/110V DC 12V AC 24V AC 48V AC 100/110V AC 110/120V AC 200/220V AC 220/240V AC 12V DC 24V DC 100/110V AC 200/220V AC Standard packing: Carton: 20 pcs.; Case: 200 pcs. Nominal coil voltage 100/110V AC 110/120V AC 200/220V AC 220/240V AC 2 Form C Part No. HJ2-L-AC100V-R-6 HJ2-L-AC120V-R-6 HJ2-L-AC200V-R-6 HJ2-L-AC220/240V-R-6 4 Form C Part No. HJ4-L-AC100V-R-6 HJ4-L-AC120V-R-6 HJ4-L-AC200V-R-6 HJ4-L-AC220/240V-R-6 2) Plug-in type (with LED indication) 4 Form C Part No. HJ4-DC 12V HJ4-DC 24V HJ4-DC 48V HJ4-DC110V HJ4-AC 12V HJ4-AC 24V HJ4-AC 48V HJ4-AC100V HJ4-AC120V HJ4-AC200V HJ4-AC220/240V Nominal coil voltage 12V DC 24V DC 48V DC 100/110V DC 12V AC 24V AC 48V AC 100/110V AC 110/120V AC 200/220V AC 220/240V AC 2 Form C Part No. HJ2-L-DC 12V HJ2-L-DC 24V HJ2-L-DC 48V HJ2-L-DC110V HJ2-L-AC 12V HJ2-L-AC 24V HJ2-L-AC 48V HJ2-L-AC100V HJ2-L-AC120V HJ2-L-AC200V HJ2-L-AC220/240V 4 Form C Part No. HJ4-L-DC 12V HJ4-L-DC 24V HJ4-L-DC 48V HJ4-L-DC110V HJ4-L-AC 12V HJ4-L-AC 24V HJ4-L-AC 48V HJ4-L-AC100V HJ4-L-AC120V HJ4-L-AC200V HJ4-L-AC220/240V Standard packing: Carton: 20 pcs.; Case: 200 pcs. 3) Plug-in type (with a test button) 2 Form C Part No. HJ2-T-DC 12V HJ2-T-DC 24V HJ2-T-AC100V HJ2-T-AC200V 4 Form C Part No. HJ4-L-DC 12V-D-6 HJ4-L-DC 24V-D-6 HJ4-L-DC 48V-D-6 HJ4-L-DC110V-D-6 Standard packing: Carton: 20 pcs.; Case: 200 pcs. Standard packing: Carton: 20 pcs.; Case: 200 pcs. Nominal coil voltage 2 Form C Part No. HJ2-L-DC 12V-D-6 HJ2-L-DC 24V-D-6 HJ2-L-DC 48V-D-6 HJ2-L-DC110V-D-6 6) Plug-in type (with CR and LED indication) 2. Without Au plating type 1) Plug-in type 2 Form C Part No. HJ2-DC 12V HJ2-DC 24V HJ2-DC 48V HJ2-DC110V HJ2-AC 12V HJ2-AC 24V HJ2-AC 48V HJ2-AC100V HJ2-AC120V HJ2-AC200V HJ2-AC220/240V 12V DC 24V DC 48V DC 100/110V DC 4 Form C Part No. HJ4-AC100V-R-6 HJ4-AC120V-R-6 HJ4-AC200V-R-6 HJ4-AC220/240V-R-6 Standard packing: Carton: 20 pcs.; Case: 200 pcs. Nominal coil voltage Nominal coil voltage Standard packing: Carton: 20 pcs.; Case: 200 pcs. 5) Plug-in type (with CR) 2 Form C Part No. HJ2-AC100V-R-6 HJ2-AC120V-R-6 HJ2-AC200V-R-6 HJ2-AC220/240V-R-6 4 Form C Part No. HJ4-L-DC 12V-6 HJ4-L-DC 24V-6 HJ4-L-DC 48V-6 HJ4-L-DC110V-6 HJ4-L-AC 12V-6 HJ4-L-AC 24V-6 HJ4-L-AC 48V-6 HJ4-L-AC100V-6 HJ4-L-AC120V-6 HJ4-L-AC200V-6 HJ4-L-AC220/240V-6 4) Plug-in type (with diode and LED indication) 4 Form C Part No. HJ4-DC 12V-D-6 HJ4-DC 24V-D-6 HJ4-DC 48V-D-6 HJ4-DC110V-D-6 Standard packing: Carton: 20 pcs.; Case: 200 pcs. Nominal coil voltage 12V DC 24V DC 48V DC 100/110V DC 12V AC 24V AC 48V AC 100/110V AC 110/120V AC 200/220V AC 220/240V AC 2 Form C Part No. HJ2-L-DC 12V-6 HJ2-L-DC 24V-6 HJ2-L-DC 48V-6 HJ2-L-DC110V-6 HJ2-L-AC 12V-6 HJ2-L-AC 24V-6 HJ2-L-AC 48V-6 HJ2-L-AC100V-6 HJ2-L-AC120V-6 HJ2-L-AC200V-6 HJ2-L-AC220/240V-6 Standard packing: Carton: 20 pcs.; Case: 200 pcs. 3) Plug-in type (with diode) Nominal coil voltage Nominal coil voltage 4) Plug-in type (with LED indication and a test button) 4 Form C Part No. HJ4-T-DC 12V HJ4-T-DC 24V HJ4-T-AC100V HJ4-T-AC200V Nominal coil voltage 12V DC 24V DC 100/110V AC 200/220V AC 2 Form C Part No. HJ2-L-T-DC 12V HJ2-L-T-DC 24V HJ2-L-T-AC100V HJ2-L-T-AC200V 4 Form C Part No. HJ4-L-T-DC 12V HJ4-L-T-DC 24V HJ4-L-T-AC100V HJ4-L-T-AC200V Standard packing: Carton: 20 pcs.; Case: 200 pcs. –2– ASCTB6E 201709-T To Be Discontinued Last time buy: September 30, 2018 HJ 5) Plug-in type (with diode) 6) Plug-in type (with diode and LED indication) 2 Form C Part No. HJ2-DC 12V-D HJ2-DC 24V-D HJ2-DC 48V-D HJ2-DC110V-D Nominal coil voltage 12V DC 24V DC 48V DC 100/110V DC 4 Form C Part No. HJ4-DC 12V-D HJ4-DC 24V-D HJ4-DC 48V-D HJ4-DC110V-D 12V DC 24V DC 48V DC 100/110V DC Standard packing: Carton: 20 pcs.; Case: 200 pcs. 100/110V AC 110/120V AC 200/220V AC 220/240V AC 4 Form C Part No. HJ4-L-DC 12V-D HJ4-L-DC 24V-D HJ4-L-DC 48V-D HJ4-L-DC110V-D Standard packing: Carton: 20 pcs.; Case: 200 pcs. 7) Plug-in type (with CR) Nominal coil voltage 2 Form C Part No. HJ2-L-DC 12V-D HJ2-L-DC 24V-D HJ2-L-DC 48V-D HJ2-L-DC110V-D Nominal coil voltage 8) Plug-in type (with CR and LED indication) 2 Form C Part No. HJ2-AC100V-R HJ2-AC120V-R HJ2-AC200V-R HJ2-AC220/240V-R 4 Form C Part No. HJ4-AC100V-R HJ4-AC120V-R HJ4-AC200V-R HJ4-AC220/240V-R 2 Form C Part No. HJ2-L-AC100V-R HJ2-L-AC120V-R HJ2-L-AC200V-R HJ2-L-AC220/240V-R Nominal coil voltage 100/110V AC 110/120V AC 200/220V AC 220/240V AC Standard packing: Carton: 20 pcs.; Case: 200 pcs. 4 Form C Part No. HJ4-L-AC100V-R HJ4-L-AC120V-R HJ4-L-AC200V-R HJ4-L-AC220/240V-R Standard packing: Carton: 20 pcs.; Case: 200 pcs. RATING 1. Coil data 1) AC coils (50/60Hz) Nominal coil current [±20%] Nominal operating power 60Hz 85.4mA 50Hz 60Hz Max. applied voltage (at 70°C 158°F) 12V AC 50Hz 102.9mA 24V AC 48V AC 100/110V AC 110/120V AC 200/220V AC 220/240V AC 54.5mA 30.7mA 11.8mA/13.9mA 10.9mA/12.5mA 6.8mA/8.1mA 6.8mA/7.8mA 45.6mA 25.9mA 10.0mA/11.6mA 9.1mA/10.3mA 5.7mA/6.7mA 5.6mA/6.4mA Approx. 1.2 to 1.5 V A Approx. 1.0 to 1.3 V A 110%V of nominal voltage Nominal coil voltage Pick-up voltage (at 20°C 68°F) Drop-out voltage (at 20°C 68°F) 80%V or less of nominal voltage (Initial) 30%V or more of nominal voltage (Initial) Pick-up voltage (at 20°C 68°F) Drop-out voltage (at 20°C 68°F) 80%V or less of nominal voltage (Initial) 10%V or more of nominal voltage (Initial) 2) DC coils Nominal coil voltage 12V DC 24V DC 48V DC 100/110V DC Nominal operating power Max. applied voltage (at 70°C 158°F) 75mA [±10%] Coil resistance (at 20°C 68°F) 160Ω 37mA [±10%] 18mA [±15%] 9.1mA/10mA [±15%] 650Ω 2,600Ω 11,000Ω 0.9W 110%V of nominal voltage Nominal coil current –3– 1.1W ASCTB6E 201709-T To Be Discontinued Last time buy: September 30, 2018 HJ 2. Specifications Characteristics Contact Rating Item Arrangement Contact resistance (Initial) Contact material Nominal switching capacity (resistive load) Max. switching power (resistive load) Max. switching voltage Max. switching current*4 Nominal operating power Min. switching capacity Au plating type (Reference value)*1 Without Au plating type Insulation resistance (Initial) Specifications 2 Form C 4 Form C Max. 50 mΩ (By voltage drop 6 V DC 1A) Au plating type: Au plating Ag Without Au plating type: Ag 7 A 250V AC, 7 A 30V DC 5 A 250V AC, 5 A 30V DC 1,750 VA 1,250 VA 250V AC, 125V DC 7A 5A 0.9W 1.2 VA 1mA 1V DC 1mA 5V DC Min. 100MΩ (at 500V DC) Measurement at same location as “Breakdown voltage” section. Between open contacts Between contact sets Between contact and coil Temperature rise (coil) (at 70°C 158°F) Operate time*2 1,000 Vrms for 1min. (Detection current: 10mA.) 2,000 Vrms for 1min. (Detection current: 10mA.) 2,000 Vrms for 1min. (Detection current: 10mA.) Max. 60°C 140°F (By resistive method, nominal coil voltage) Max. 20ms (Nominal coil voltage applied to the coil, excluding contact bounce time.) Max. 20ms (Nominal coil voltage applied to the coil, excluding contact bounce time.) (without diode) Min. 100 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10μs.) Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.) 10 to 55 Hz at double amplitude of 1.0 mm (Detection time: 10μs.) 10 to 55 Hz at double amplitude of 1.0 mm Min. 2×107 (at 180 times/min.) Min. 105 (5A 250V AC) Min. 105 (7A 250V AC) Min. 5×105 (5A 250V AC) Min. 2×105 (3A 250V AC) Min. 105 (7A 30V DC) Min. 105 (5A 30V DC) Ambient temperature: –40°C to +70°C –40°F to +158°F Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) 20 times/min. (at nominal switching capacity) Approx. 34g 1.20 oz Breakdown voltage (Initial) Electrical characteristics Release time*2 Shock resistance Mechanical characteristics Vibration resistance Functional Destructive Functional Destructive Mechanical Expected life Electrical (resistive load) (at 20 times/min.) Conditions for operation, transport and storage*3 (Not freezing and condensing at low temperature) Max. Operating speed Conditions Unit weight Notes: In accordance with the Electrical Appliance and Material Safety Law, you cannot exceed a voltage of 150V AC when using the 4 Form C type. For more information, please inquire. When using low level loads, contact instability may result depending on conditions of use (switching frequency and ambient conditions, etc.); therefore, please use the Au plating type. *1. This value can change due to the switching frequency, environmental conditions and desired reliability level, therefore it is recommended to check this with the actual load. *2. For the AC coil types, the operate/release time will differ depending on the phase. *3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage conditions in NOTES. *4. When using the socket and terminal socket, be sure to verify the max. continuous current. REFERENCE DATA AC resistive load With test button type only AC resistive load 1 DC inductive load L/R=7ms 5 1 0.5 50 AC resistive load DC resistive load 50 100 125 250 Contact voltage, V AC 250V (cos φ =0.4) AC inductive load cos φ =0.4 0.1 10 50 100 125 250 Contact voltage, V –4– AC 250V (cos φ =1) 100 DC inductive load L/R=7ms AC inductive load cos φ =0.4 10 500 3 DC resistive load 0.1 2-(1). Life curve (2 Form C) Life, ×104 10 7 5 0.5 1-(2). Max. switching capacity (4 Form C type) Contact current, A Contact current, A 1-(1). Max. switching capacity (2 Form C type) 10 0 1 2 3 4 5 6 7 Load current, A ASCTB6E 201709-T To Be Discontinued Last time buy: September 30, 2018 HJ 2-(2). Life curve (4 Form C) 3-(1). Coil temperature rise (2 Form C/AC type) 3-(2). Coil temperature rise (2 Form C/DC type) Measured portion: Inside the coil Ambient temperature: 70°C 158°F Measured portion: Inside the coil Ambient temperature: 70°C 158°F 70 AC 250V (cos φ =1) 100 50 AC 250V (cos φ =0.4) 10 0 1 2 60 7A 50 0A 40 30 90 100 110 120 70 70 60 60 Temperature rise, °C Temperature rise, °C Measured portion: Inside the coil Ambient temperature: 70°C 158°F 7A 40 0A 100 10 120 0 282V 80V 0A To digital memory 200V AC 80 90 100 110 120 Coil applied voltage, %V Coil applied voltage, %V 4-(2). AC coil surge voltage waveform (Without CR circuit) 120 4-(1). AC coil surge voltage waveform (With CR circuit) 5A 30 10 110 110 40 20 100 90 Tested sample: HJ4-AC200V-R 50 20 90 80 Coil applied voltage, %V 3-(4). Coil temperature rise (4 Form C/DC type) 80 0 Coil applied voltage, %V Measured portion: Inside the coil Ambient temperature: 70°C 158°F 0 0A 30 10 3-(3). Coil temperature rise (4 Form C/AC type) 30 40 10 80 5A 50 20 Load current, A 50 60 20 0 3 70 Temperature rise, °C Temperature rise, °C Life, ×104 500 5-(1). DC coil surge voltage waveform (Without diode) Tested sample: HJ4-AC200V 5-(2). DC coil surge voltage waveform (With diode) Diode characteristics: Reverse breakdown voltage: 1,000 V Forward current: 1 A ON OFF ON OFF 282V Approx. 260V Approx. 630V 200V AC To digital memory 12V DC 12V DC –5– To digital memory To digital memory Reverse breakdown voltage: 1,000 V Forward current: 1 A ASCTB6E 201709-T To Be Discontinued Last time buy: September 30, 2018 HJ DIMENSIONS (mm inch) The CAD data of the products with a 1. Plug-in type (2 Form C) (including diode/CR) CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/ External dimensions CAD Data Max. 28 1.102 Schematic (Bottom view) Standard type Max. 21.5 .846 Max. 35 1.378 1 5 4 8 9 13 0.5 .020 0.5 .020 4 8 12 9 12 9 12 14 13 14 (–)13 14(+) 13 (–) 6.8 .268 13 9 1 5 Dimension: Less than 1mm .039inch: Min. 1mm .039inch less than 3mm .118 inch: Min. 3mm .118 inch: 5 8 5 8 9 12 14 (+) 9 12 14 Max. 28 1.102 1 5 8 5 8 9 12 14 (+) 9 12 1 5 2 6 LED AC type 4 8 1 5 2 6 3 7 1 5 13 14 2.5 .098 13 (–) 6.8 .268 2 3 Dimension: Less than 1mm .039inch: Min. 1mm .039inch less than 3mm .118 inch: Min. 3mm .118 inch: 3 7 4 8 (–)13 14(+) CR AC type 1 2 3 4 5 6 7 8 5 6 7 8 9 10 11 12 14 (+) 9 10 11 12 14 1 13 (–) 2 6 9 10 11 12 14 4 Diode/LED DC type 4.4 13.2 .173 .520 LED DC type 4 8 13 14 9 10 11 12 3 7 Diode DC type 13 4 8 3 7 2 6 14 9 10 11 12 1 1 5 13 9 10 11 12 0.5 .020 5.8+0.4 −0.2 .228+.016 −.008 4 Schematic (Bottom view) Standard type Max. 21.5 .846 0.5 .020 CR/LED AC type Tolerance ±0.1 ±.004 ±0.2 ±.008 ±0.3 ±.012 Max. 35 1.378 16.8 .661 12.7 .500 6.4 .252 13 4 4 External dimensions CAD Data CR AC type 1 1 13 (–) 4 8 4 Diode/LED DC type 14 12 4 8 2.5 .098 13.2 .520 2. Plug-in type (4 Form C) (including diode/CR) 1 5 Diode DC type 5.8+0.4 −0.2 .228+.016 −.008 LED DC type 1 5 1 16.8 .661 12.7 .500 6.4 .252 LED AC type 2 3 13 CR/LED AC type 4 1 2 3 4 5 6 7 8 5 6 7 8 9 10 11 12 14 (+) 9 10 11 12 13 14 Tolerance ±0.1 ±.004 ±0.2 ±.008 ±0.3 ±.012 –6– ASCTB6E 201709-T To Be Discontinued Last time buy: September 30, 2018 HJ 3. Plug-in type with a test button (2 Form C) External dimensions CAD Data Max. 28 1.102 Schematic (Bottom view) Standard type Max. 21.5 .846 Max. 38 1.496 Max. 36 1.417 12 14 LED DC type 1 5 4 8 9 12 9 12 13 14 (–)13 14(+) Dimension: Less than 1mm .039inch: Min. 1mm .039inch less than 3mm .118 inch: Min. 3mm .118 inch: 13 9 9 13 1 5 4 8 6.8 .268 14 12 4 8 2.5 .098 0.5 .020 5.8+0.4 −0.2 .228+.016 −.008 13.2 .520 1 5 4 8 LED AC type 0.5 .020 16.8 .661 12.7 .500 6.4 .252 1 5 Tolerance ±0.1 ±.004 ±0.2 ±.008 ±0.3 ±.012 4. Plug-in type with a test button (4 Form C) External dimensions CAD Data Max. 28 1.102 Schematic (Bottom view) Standard type Max. 21.5 .846 1 5 2 6 3 7 4 8 9 10 11 12 Max. 38 1.496 13 Max. 36 1.417 14 LED AC type 0.5 .020 1 5 2 6 3 7 LED DC type 4 8 1 5 9 10 11 12 14 9 10 11 12 13 3 7 4 8 9 10 11 12 14 (–)13 14(+) 6.8 .268 4.4 13.2 .173 .520 13 1 2 3 4 5 6 7 8 16.8 .661 12.7 .500 6.4 .252 2.5 .098 0.5 .020 5.8+0.4 −0.2 .228+.016 −.008 2 6 Dimension: Less than 1mm .039inch: Min. 1mm .039inch less than 3mm .118 inch: Min. 3mm .118 inch: Tolerance ±0.1 ±.004 ±0.2 ±.008 ±0.3 ±.012 SAFETY STANDARDS File No. Certification authority: UL/C-UL File No. 2 Form C E43149* 7A 250V AC, 7A 30V DC R50049126 4 Form C E43149* 5A 250V AC, 5A 30V DC R50049126 Certification authority: TÜV 7A 250V AC (cosφ =1.0), 7A 30V DC (0ms) Test button type: 10A 250V AC (cosφ =1.0), 10A 30V DC (0ms) 5A 250V AC (cosφ =1.0), 5A 30V DC (0ms) * CSA standard: Certified by C-UL –7– ASCTB6E 201709-T To Be Discontinued Last time buy: September 30, 2018 HJ NOTES 1. For cautions for use, please read “General Application Guidelines”. 2. Coil applied voltage Please refer to “RATING” about coil input power supply. 3. LED display Operation is displayed by the light emitted from the LED. The LED may remain briefly lit if voltage remains after the relay opens. 4. Switching lifetime The switching lifetime is defined under the standard test condition specified in the JIS* C 5442 standard (temperature 15 to 35°C 59 to 95°F, humidity 25 to 75%). Check this with the real device as it is affected by coil driving circuit, load type, activation frequency, activation phase,ambient conditions and other factors. Also, be especially careful of loads such as those listed below. 1) When used for AC load-operating and the operating phase is synchronous. Rocking and fusing can easily occur due to contact shifting. 2) High-frequency load-operating When high-frequency opening and closing of the relay is performed with a load that causes arcs at the contacts, nitrogen and oxygen in the air is fused by the arc energy and HNO3 is formed. This can corrode metal materials. Three countermeasures for these are listed here. (1) Incorporate an arc-extinguishing circuit. (2) Lower the operating frequency (3) Lower the ambient humidity 5. Usage, transport and storage conditions 1) Temperature, humidity and pressure during usage, storage and transport (1) Temperature: –40 to +70°C –40 to +158°F (2) Humidity: 5 to 85% RH (Avoid freezing and condensation.) The humidity range varies with the temperature. Use within the range indicated in the graph below. Temperature and humidity range for usage, transport, and storage Humidity, %R.H. 85 5 –40 –40 (Avoid condensation when used at temperatures higher than 0°C 32°F) 0 +32 Temperature, °C °F Push For Lock For Release 70 +158 (3) Atmospheric pressure: 86 to 106 kPa 2) Condensation Condensation forms when there is a sudden change in temperature under high temperature and high humidity conditions. Condensation will cause deterioration of the relay insulation. 3) Freezing Condensation or other moisture may freeze on the relay when the temperatures is lower than 0°C 32°F. This causes problems such as sticking of movable parts or operational time lags. 4) Low temperature, low humidity environments The plastic becomes brittle if the relay is exposed to a low temperature, low humidity environment for long periods of time. –8– 1 Release 2) To lock to one side turn 90° counterclockwise while pushing lock and turn 90° clockwise to release. Tolerance range (Avoid freezing when used at temperatures lower than 0°C 32°F) 6. Operation method for test button 1) Push and release 1 gently to confirm relay switching. 3) Do not use the test button for anything other than testing, such as when checking the circuit. 7. Diode characteristics 1) Reverse breakdown voltage: 1,000 V 2) Forward current: 1A 8. Diode and CR built-in type Since the diode and CR inside the relay coil are designed to absorb the counter emf, the element may be damaged if a large surge, etc., is applied to the diode and CR. If there is the possibility of a large surge voltage from the outside, please implement measures to absorb it. 9. Please connect DC coil types with LED and built-in diode correctly by verifying the coil polarity (“+” and “– ”). Connecting with reverse polarity will cause the LED not to light and damage the built-in diode due to its specification. ASCTB6E 201709-T