A variety of high-end functions are included in a compact,
self-contained body for exceptional ease of use
Easy input settings while looking at digital display
The built-in digital display makes it easy to perform sensor setting
while checking displacement values.
5.5 digit, 7-segment LED display
UP key
HL-G125-A-C5 HL-G125-S-J
Easy to embed in machines and production
lines thanks to a built-in controller
20.4
0.803
2-ø 4.5 ø 0.177
51.4
2.024
60
2.362
Beam-receiving axis
47.5
1.870
57 2.244
49.4 1.945
70
47.5 1.8
ft
ø6.85
ø0.270
0.5
m
15°
Equipped on HL-G125-S-J only
ø12.5
ø0.492
4
1. 3
1.6 693
40
ft
Specular reflection type
Equipped on HL-G103A-RS-J only
Lightweight body that can be
installed on movable parts
Its lightweight resin body weighs 70 g approx., which can be
installed on moving parts such as sliders and robot arms.
Cable with superior flexibility is fitted as standard.
Height: 60 mm 2.362 in
Ideal for measuring mirrored objects
62.4
2.457
33
1.299
0
64
1.
ø12.5
ø0.492
43 93
6
1.
HL-G1
2-ø 4.5 ø 0.177
72.3
2.846
Beamreceiving axis
m
Amplifier separated type sensor
Depth: 57 mm
2.244 in
Diffuse reflection type
66.6 2.622
34.41
1.355
Flexible
cable
HL-G105A-RA-C5 HL-G105A-RS-J
5.5 digit LED display (Red)
Alarm indicator (Orange)
Laser emission indicator (Green)
20.4
0.803
64.2 2.528
39.32
1.548
Software tool for sensor
configuration and evaluation
In addition to configuring up to 16 sensors at once, this free tool makes
it easy to gather data needed for analysis, such as received light
waveform monitoring and data buffering. The interface language can
be selected at the time of installation.
● Data buffering
Stores and displays measurement data, which can be superimposed on
previously recorded data for easy comparison and analysis.
● Received light waveform display
Displays the amount of light received by cell from light-receiving element.
● Measured value display
Displays measured values as well as the output state for each terminal.
HMI screen data for sensor
setting and data indication
The GT02 / GT12 series HMI
can be used in combination
with the HL-G1 to allow easy
confirmation of sensor status and
configuration of sensor settings
from a remote location. Japanese,
English, Chinese, and Korean are
supported. For more information
about the GT series, visit our
website or refer to our catalog.
Select from the following HMI
operator panels:
Power supply: 24 V
Communication port: RS422
(RS485)
● AIG02GQ14D
● AIG02MQ15D
● AIG12GQ14D / AIG12GQ15D
● AIG12MQ14D / AIG12MQ15D
66.8
2.630
Beamreceiving axis
7.53°
ø12.5
ø0.492
ø6.85
ø0.270
0.
5
m
4
1. 1.6 3
64 93
0
ft
ø12.5
ø0.492
L
Model No.
L
HL-G1CCJ2
2,000 +2000
78.740 +7.8740
5,000 +5000
196.850 +19.6850
10,000 +1,0000
393.701 +39.3700
20,000 +2,0000
787.402 +78.7400
2013.12
31.2
1.228
Equipped on HL-G108A-RS-J only
Extension cable
HL-G1CCJ10
66.8
2.630
57.4
2.260
Extension cable (optional)
(43 1.693)
ø 12.5
ø 0.492
panasonic.net/id/pidsx/global
ø 6.85 ø 0.270 cable
14-core × 0.1 mm2
Insulator diameter: ø 0.7 mm ø 0.028 in
(RS-422/485 communication cable:
ø 1.0 mm ø 0.039 in)
(50 1.969)
Panasonic Industrial Devices SUNX Co., Ltd.
Global Sales Department
Sensor configuration and evaluation software tool, HMI screen data, function blocks, etc.
Terms of use
Panasonic Industrial Devices SUNX offers no warranty for this software and is not liable for any loss or damage suffered as a result of its use or operation,
whether direct, indirect, incidental, consequential, or unforeseen.
ø6.85
ø0.270
0.5
4
m
1.6 1.693
3
40
ft
2-ø 4.5 ø 0.177
15.05°
HL-G1CCJ□
HL-G1CCJ20
Software is available for download.
Beam-emitting axis
Equipped on HL-G105A-RS-J only
HL-G1CCJ5
62.3 2.453
42.24
1.663
47.5
1.870
10.39°
OUT 1 indicator (Yellow)
OUT 2 indicator (Yellow)
OUT 3 indicator (Yellow)
UP key
DOWN key
Measurement
center distance
82.9 3.264
10.75 0.423
20.4
0.803
69
2.717
59.5
2.343
32.8
1.291
69
2.717
Sensor head
ENTER key
2-ø 4.5 ø 0.177
20.77°
Beamreceiving axis
5.5 digit LED display (Red)
Alarm indicator (Orange)
Laser emission indicator (Green)
UP key
DOWN key
47.5
1.870
Thanks to its IP67 protective
enclosure, the HL-G1 can be used in
the presence of water and dust.
Mounting holes are lined with metal
sleeves, allowing the instrument to be
tightened securely in place with up to
0.8 N·m of torque.
Measurement
center distance
47.3
1.862
13.4
0.528
Beam-emitting axis
HL-G108A-RA-C5 HL-G108A-RS-J
OUT 1 indicator (Yellow)
OUT 2 indicator (Yellow)
OUT 3 indicator (Yellow)
ENTER key
IP67 protective enclosure protects
from water and dust
Sensor head
No.CE-HLG1A-4 December, 2013
2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan
Telephone: +81-568-33-7861
Facsimile: +81-568-33-8591
All Rights Reserved ©Panasonic Industrial Devices SUNX Co., Ltd. 2013
Ŷ
Laser Displacement Sensor
Diffuse reflection type HL-G125Ƒ
Specular reflection type HL-G10ƑAƑ
Measure distances as long as 250mm
30°
4.3 ø 6.85 ø 0.270
0.169
Width: 20.4 mm
0.803 in
New models
UP key
DOWN key
Measurement
center distance
26.3
1.035
17.5
0.689
Beamemitting axis
72.3
2.846
5
0.
DOWN key
Sensor head
OUT 1 indicator (Yellow)
OUT 2 indicator (Yellow)
OUT 3 indicator (Yellow)
ENTER key
UP key
DOWN key
Measurement
center distance
250 9.843
3.8
Beam0.150
emitting axis
6.2°
20.4
0.803
HL-G103A-RA-C5 HL-G103A-RS-J
5.5 digit LED display (Red)
Alarm indicator (Orange)
Laser emission indicator (Green)
OUT 1 indicator (Yellow)
OUT 2 indicator (Yellow)
OUT 3 indicator (Yellow)
ENTER key
Controller installation and mounting space is not required because
controller function is included in sensor unit.
ENTER key
Sensor head
5.5 digit LED display (Red)
Alarm indicator (Orange)
Laser emission indicator (Green)
Compact
For dimensions of the diffuse reflection type (other than the HL-G125□), refer to the HL-G1
catalog or our website. CAD data for dimensional diagrams can be downloaded from our website.
DIMENSIONS (Unit: mm in)
Ŷ
2013.12
panasonic.net/id/pidsx/global
Conforming to
EMC Directive
Conforming to
FDA regulations
Measurement range: 26.3 ±2 mm 1.035 ±0.079 in
0.5 μm 0.020 mil
Resolution:
Linearity:
±0.2 % F.S.
Beam diameter: 0.1 × 0.1 mm 0.004 × 0.004 in
30 mm
1.181 in
50 mm
1.969 in
85 mm
3.346 in
120 mm
4.724 in
250 mm
9.843 in
26.3 mm
1.035 in
47.3 mm
1.862 in
82.9 mm
3.264 in
Measuring range
±4 mm
±0.157 in
±10 mm
±0.394 in
±20 mm
±0.787 in
±60 mm
±2.362 in
±150 mm
±5.906 in
±2 mm
±0.079 in
±5 mm
±0.197 in
±10 mm
±0.394 in
Resolution
0.5 μm
0.020 mil
1.5 μm
0.059 mil
2.5 μm
0.098 mil
8 μm
0.315 mil
20 μm
0.787 mil
0.5 μm
0.020 mil
1.5 μm
0.059 mil
2.5 μm
0.098 mil
Linearity
±0.1 % F.S.
±0.3 % F.S.
Temprerature characteristics
Light source
Beam diameter (Note 2)
Controlling the height of
a dispenser nozzle
Measuring HDD surface fluctuation
Specular reflection type
HL-G105□
HL-G105A□
Measurement range: 50 ±10mm 1.969 ±0.394 in
1.5 μm 0.059 mil
Resolution:
Linearity:
±0.1 % F.S.
Beam diameter: 0.5 × 1.0 mm 0.020 × 0.039 in
Measurement range: 47.3 ±5 mm 1.862 ±0.197 in
1.5 μm 0.059 mil
Resolution:
Linearity:
±0.2 % F.S.
Beam diameter: 0.1 × 0.1 mm 0.004 × 0.004 in
0.1 × 0.1 mm
0.5 ×1.0 mm
0.75 × 1.25 mm 1.0 × 1.5 mm
1.75 × 3.5 mm
0.004 × 0.004 in 0.020 × 0.039 in 0.030 × 0.049 in 0.039 × 0.059 in 0.069 × 0.138 in
Sampling rate
200 μs, 500 μs, 1 ms, 2 ms
Output range: 3.2 to 20.8 mA (normal) / 21.6 mA (at alarm), Load impedance: 300 Ω max.
• Maximum sink current : 50 mA
• Applied voltage : 3 to 24 V DC (between output and 0 V)
• Residual voltage : 2 V or less (at 50 mA of sink current)
HL-G108A□
Multi input
Measurement range: 85 ±20 mm 3.346 ±0.787 in
2.5 μm 0.098 mil
Resolution:
Linearity:
±0.1 % F.S.
Beam diameter: 0.75 ×1.25 mm 0.030×0.049 in
Measurement range: 82.9 ±10 mm 3.264 ±0.394 in
2.5 μm 0.098 mil
Resolution:
Linearity:
±0.2 % F.S.
Beam diameter: 0.2 × 0.2 mm 0.008 × 0.008 in
Communications
interface (high-function
type only)
Indicator
HL-G108□
Open when the output is ON.
NPN open collector output operates when 0 V is connected. PNP open collector output operates when 24 V DC is connected.
NPN output operates when 0 V is connected and NPN is set (depending on settings).
PNP output operates when external power + is connected and PNP is set (depending on settings).
Zero set, zero set off, reset, memory switching, teaching, saving, and laser control according to the input time.
In case NPN output is selected, function varies according to the time 0 V is connected NPN.
In case PNP output is selected, function varies according to the time external power + is connected.
RS-422 or RS-485 (selectable)
Baud rate: 9,600 / 19,200 / 38,400 / 115,200 / 230,400 / 460,800 / 921,600 bps
Data length 8 bit, stop bit length 1 bit, without parity check, BCC check, termination code: CR
Laser emission
Orange LED (lights up when this product cannot measure because of insufficient or excessive light intensity)
Output
Yellow LED x 3
Cable
Cable extension
Weight
HL-G112□
Measurement range: 120 ±60 mm
4.724 ±2.362 in
8 μm 0.315 mil
Resolution:
Linearity:
±0.1 % F.S.
Beam diameter: 1.0 × 1.5 mm
0.039 × 0.059 in
Enclosure: PBT, front cover: acrylic, cable: PVC
Standard type: 0.1 mm2 10-core cabtyre cable, 5 m 16.404 ft long, high functionality type: 14-core cabtyre cable with connector, 0.5 m 1.640 ft long
Extension up to total 20 m 65.617 ft is possible with optional cable (Cable for standard type cannot be extended).
Standard type
Net weight: 70 g approx. (not including cable), 320 g approx. (including cable), gross weight: 380 g approx.
High functionality type
Net weight: 70 g approx. (not including cable), 110 g approx. (including cable), gross weight: 160 g approx.
Warning label: 1 set
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were as follows: supply voltage 24 V DC, ambient temperature
+20 °C +68 °F, sampling rate 500 μs, average number of samples: 1024, measurement center distance, object measured is made of white ceramic
and analog measurement values.
2) This beam diameter is the size at the measurement center distance. These values were defined by using 1/e2 (13.5 %) of the center light intensity.
The results may be affected if there is a slight leakage of light outside the normal spot diameter and if the periphery surrounding the sensing point has
a higher reflectivity than the sensing point itself.
OPTIONS
Diffuse reflection type
HL-G125□
Type
Measurement range: 250 ±150 mm
9.843 ±5.906 in
20 μm 0.787 mil
Resolution:
Linearity:
±0.3 % F.S.
Beam diameter: 1.75 × 3.5 mm
0.069 × 0.138 in
Extension
cable (for High
function type)
Testing sheet slack
0
í0.4
í150
í5.906
0.2
150
5.906
0.2
í0.4
í150
í5.906
í
0
í (Center)
150
5.906
í0.4
í2.0
í0.079
0.2
0
í0.2
0
í0.2
í
0
í (Center)
2.5
5.0
0.197
í0.4
í5.0
í0.197
í
0
í (Center)
2.0
0.079
í0.4
í2.0
í0.079
í
0
í (Center)
2.5
5.0
0.197
Measuring distance L (mm in)
2.0
0.079
Horizontal positioning
0.4
0.1°
0°
í0.1°
6DPSOLQJUDWH ȝV
Average number of
samples: 1024
0
í0.4
í10.0
í0.394
Specular reflection type
í0.2
6DPSOLQJUDWH ȝV
Average number of
samples: 1024
í
0
í (Center)
Measuring distance L (mm in)
0.4
0.2
6DPSOLQJUDWH ȝV
Average number of
VDPSOHV
í0.2
Vertical positioning
0.05°
0°
í0.05°
í
0
HL-G108A-R□
Horizontal positioning
6DPSOLQJUDWH ȝV
Average number of
samples: 1024
0.2
Measuring distance L (mm in)
0.4
0.1°
0°
í0.1°
6DPSOLQJUDWH ȝV
Average number of
VDPSOHV
í0.2
Specular reflection type
0.4
Horizontal positioning
0.4
0.5°
0°
í0.5°
0
Measuring distance L (mm in)
Vertical positioning
í0.4
í5.0
í0.197
6DPSOLQJUDWH ȝV
Average number of
samples: 1024
0
0HDVXULQJGLVWDQFH/ PPin)
0.2
Vertical positioning
0.4
10°
0°
í10°
í0.2
í
0
í (Center)
Specular reflection type
0.2
í
6DPSOLQJUDWH ȝV
Average number of
samples: 1024
0
í0.2
í
0
í (Center)
Measuring distance L (mm in)
10.0
0.394
í0.4
í10.0
í0.394
í
0
í (Center)
Measuring distance L (mm in)
10.0
0.394
IP67 (IEC)
–10 to +45 °C +14 to +113 °F (No dew condensation), Storage: –20 to +60 °C –4 to +140 °F (No dew condensation)
Accessory
Detecting rotating direction of fan
6DPSOLQJUDWH ȝV
Average number of
VDPSOHV
Measuring distance L (mm in)
Red LED 5.5 digit display
Protection
Material
Diffuse reflection type
Horizontal positioning
0.4
10°
0°
í10°
Green LED (lights up during laser emission)
Alarm
Ambient temperature
9HUWLFDOSRVLWLRQLQJ
HL-G105A-R□
Incorporated (automatic restoration)
Digital display
Measuring the
eccentricity of a metal shaft
• Maximum source current : 50 mA
• Residual voltage : 2.8 V or less (at 50 mA of source current)
HL-G103A-R□
Diffuse reflection type
í
Judgment output or alarm output (setting selectable)
NPN transistor, open-collector / PNP transistor, open-collector (selectable)
Specular reflection type
HL-G125□
Current
Diffuse reflection type
L
Measuring
object
0.4
Output range: 0 to 10.5 V (normal) / 11 V (at alarm), Output impedance: 100 Ω
Timing input
Detecting presence of O-ring
0.2 × 0.2 mm
0.008 × 0.008 in
Voltage
Output polarity setting input
L
100 mA max.
Short circuit protection
Positioning of wafer
í
Sensor head
Measuring
object
24 V DC ±10 % including ripple 0.5 V (P-P)
Output operation
Inspecting processed
food quantities
0.1 × 0.1 mm
0.004 × 0.004 in
CMOS image sensor
Current consumption
Output
(OUT 1, OUT 2, OUT 3)
+
±0.08 % F.S. / °C
Receiving element
Analog
output
+
Sensor head
±0.2 % F.S.
Red semiconductor laser, Class 2 (Class 1 for specular reflection type) (IEC / JIS / FDA, Laser Notice No. 50)
Max. output: 1 mW (0.39mW for specular reflection type) Peak emission wavelength: 655 nm 0.026 mil
Supply voltage
Diffuse reflection type
í
White ceramic
Horizontal orientation
Error (% F.S.)
Measurement range: 30 ±4 mm 1.181 ±0.157 in
0.5 μm 0.020 mil
Resolution:
Linearity:
±0.1 % F.S.
Beam diameter: 0.1 × 0.1 mm 0.004 × 0.004 in
Measurement center
distance
White ceramic
Vertical orientation
Error (% F.S.)
HL-G103A□
High function type HL-G103-S-J HL-G105-S-J HL-G108-S-J HL-G112-S-J HL-G125-S-J HL-G103A-RS-J HL-G105A-RS-J HL-G108A-RS-J
Error (% F.S.)
HL-G103□
Correlation between measuring distance and error characteristics
Standard type HL-G103-A-C5 HL-G105-A-C5 HL-G108-A-C5 HL-G112-A-C5 HL-G125-A-C5 HL-G103A-RA-C5 HL-G105A-RA-C5 HL-G108A-RA-C5
Error (% F.S.)
Specular reflection type
Specular reflection type
Error (% F.S.)
Item
Diffuse reflection type
Error (% F.S.)
Model No.
Type
For sensing characteristics diagrams for the diffuse reflection type
(other than the HL-G125□), refer to the HL-G1 catalog or our website.
SENSING CHARACTERISTICS (TYPICAL)
Error (% F.S.)
A total of 8 models accommodate a variety of applications
Diffuse reflection type
For more information about I/O circuit diagrams and communication specifications
of the high-function type, refer to the HL-G1 catalog or our website.
SPECIFICATIONS
Error (% F.S.)
Extensive selection
Appearance
Model No.
Description
HL-G1CCJ2
Length: 2 m 6.562 ft, Weight: 130 g approx.
HL-G1CCJ5
Length: 5 m 16.404 ft, Weight: 320 g approx.
HL-G1CCJ10
Length: 10 m 32.808 ft, Weight: 630 g approx.
HL-G1CCJ20
Length: 20 m 65.617 ft, Weight: 1300 g approx.
14-core cabtyre cable
with connector on both
ends
PRECAUTIONS FOR PROPER USE
• This product has been developed / produced for
industrial use.
• Never use this product as a sensing device for
personnel protection.
• In case of using sensing devices for personnel
protection, use products which meet laws and
standards, such as OSHA, ANSI or IEC etc., for
personnel protection applicable in each region or
country.
• Do not operate products using methods other
than the ones described in the instruction manual
included with each product. Control or adjustment
through procedures other than the ones specified
may cause hazardous laser radiation exposure.
• The following label is attached to the product.
Handle the product according to the instruction
given on the warning label.
The Japanes, English, Chinese, Korean warning
label is packed with the sensor.
(
)
• This product is classified as a Class 2
(specular reflection type: Class 1) Laser
Product under IEC / JIS standards and
FDA regulations. Do not look at the laser
beam directly or through an optical system
such as a lens.
(A Class 2 label is shown above.)
Measurement range: 26.3 ±2 mm 1.035 ±0.079 in
0.5 μm 0.020 mil
Resolution:
Linearity:
±0.2 % F.S.
Beam diameter: 0.1 × 0.1 mm 0.004 × 0.004 in
30 mm
1.181 in
50 mm
1.969 in
85 mm
3.346 in
120 mm
4.724 in
250 mm
9.843 in
26.3 mm
1.035 in
47.3 mm
1.862 in
82.9 mm
3.264 in
Measuring range
±4 mm
±0.157 in
±10 mm
±0.394 in
±20 mm
±0.787 in
±60 mm
±2.362 in
±150 mm
±5.906 in
±2 mm
±0.079 in
±5 mm
±0.197 in
±10 mm
±0.394 in
Resolution
0.5 μm
0.020 mil
1.5 μm
0.059 mil
2.5 μm
0.098 mil
8 μm
0.315 mil
20 μm
0.787 mil
0.5 μm
0.020 mil
1.5 μm
0.059 mil
2.5 μm
0.098 mil
Linearity
±0.1 % F.S.
±0.3 % F.S.
Temprerature characteristics
Light source
Beam diameter (Note 2)
Controlling the height of
a dispenser nozzle
Measuring HDD surface fluctuation
Specular reflection type
HL-G105□
HL-G105A□
Measurement range: 50 ±10mm 1.969 ±0.394 in
1.5 μm 0.059 mil
Resolution:
Linearity:
±0.1 % F.S.
Beam diameter: 0.5 × 1.0 mm 0.020 × 0.039 in
Measurement range: 47.3 ±5 mm 1.862 ±0.197 in
1.5 μm 0.059 mil
Resolution:
Linearity:
±0.2 % F.S.
Beam diameter: 0.1 × 0.1 mm 0.004 × 0.004 in
0.1 × 0.1 mm
0.5 ×1.0 mm
0.75 × 1.25 mm 1.0 × 1.5 mm
1.75 × 3.5 mm
0.004 × 0.004 in 0.020 × 0.039 in 0.030 × 0.049 in 0.039 × 0.059 in 0.069 × 0.138 in
Sampling rate
200 μs, 500 μs, 1 ms, 2 ms
Output range: 3.2 to 20.8 mA (normal) / 21.6 mA (at alarm), Load impedance: 300 Ω max.
• Maximum sink current : 50 mA
• Applied voltage : 3 to 24 V DC (between output and 0 V)
• Residual voltage : 2 V or less (at 50 mA of sink current)
HL-G108A□
Multi input
Measurement range: 85 ±20 mm 3.346 ±0.787 in
2.5 μm 0.098 mil
Resolution:
Linearity:
±0.1 % F.S.
Beam diameter: 0.75 ×1.25 mm 0.030×0.049 in
Measurement range: 82.9 ±10 mm 3.264 ±0.394 in
2.5 μm 0.098 mil
Resolution:
Linearity:
±0.2 % F.S.
Beam diameter: 0.2 × 0.2 mm 0.008 × 0.008 in
Communications
interface (high-function
type only)
Indicator
HL-G108□
Open when the output is ON.
NPN open collector output operates when 0 V is connected. PNP open collector output operates when 24 V DC is connected.
NPN output operates when 0 V is connected and NPN is set (depending on settings).
PNP output operates when external power + is connected and PNP is set (depending on settings).
Zero set, zero set off, reset, memory switching, teaching, saving, and laser control according to the input time.
In case NPN output is selected, function varies according to the time 0 V is connected NPN.
In case PNP output is selected, function varies according to the time external power + is connected.
RS-422 or RS-485 (selectable)
Baud rate: 9,600 / 19,200 / 38,400 / 115,200 / 230,400 / 460,800 / 921,600 bps
Data length 8 bit, stop bit length 1 bit, without parity check, BCC check, termination code: CR
Laser emission
Orange LED (lights up when this product cannot measure because of insufficient or excessive light intensity)
Output
Yellow LED x 3
Cable
Cable extension
Weight
HL-G112□
Measurement range: 120 ±60 mm
4.724 ±2.362 in
8 μm 0.315 mil
Resolution:
Linearity:
±0.1 % F.S.
Beam diameter: 1.0 × 1.5 mm
0.039 × 0.059 in
Enclosure: PBT, front cover: acrylic, cable: PVC
Standard type: 0.1 mm2 10-core cabtyre cable, 5 m 16.404 ft long, high functionality type: 14-core cabtyre cable with connector, 0.5 m 1.640 ft long
Extension up to total 20 m 65.617 ft is possible with optional cable (Cable for standard type cannot be extended).
Standard type
Net weight: 70 g approx. (not including cable), 320 g approx. (including cable), gross weight: 380 g approx.
High functionality type
Net weight: 70 g approx. (not including cable), 110 g approx. (including cable), gross weight: 160 g approx.
Warning label: 1 set
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were as follows: supply voltage 24 V DC, ambient temperature
+20 °C +68 °F, sampling rate 500 μs, average number of samples: 1024, measurement center distance, object measured is made of white ceramic
and analog measurement values.
2) This beam diameter is the size at the measurement center distance. These values were defined by using 1/e2 (13.5 %) of the center light intensity.
The results may be affected if there is a slight leakage of light outside the normal spot diameter and if the periphery surrounding the sensing point has
a higher reflectivity than the sensing point itself.
OPTIONS
Diffuse reflection type
HL-G125□
Type
Measurement range: 250 ±150 mm
9.843 ±5.906 in
20 μm 0.787 mil
Resolution:
Linearity:
±0.3 % F.S.
Beam diameter: 1.75 × 3.5 mm
0.069 × 0.138 in
Extension
cable (for High
function type)
Testing sheet slack
0
í0.4
í150
í5.906
0.2
150
5.906
0.2
í0.4
í150
í5.906
í
0
í (Center)
150
5.906
í0.4
í2.0
í0.079
0.2
0
í0.2
0
í0.2
í
0
í (Center)
2.5
5.0
0.197
í0.4
í5.0
í0.197
í
0
í (Center)
2.0
0.079
í0.4
í2.0
í0.079
í
0
í (Center)
2.5
5.0
0.197
Measuring distance L (mm in)
2.0
0.079
Horizontal positioning
0.4
0.1°
0°
í0.1°
6DPSOLQJUDWH ȝV
Average number of
samples: 1024
0
í0.4
í10.0
í0.394
Specular reflection type
í0.2
6DPSOLQJUDWH ȝV
Average number of
samples: 1024
í
0
í (Center)
Measuring distance L (mm in)
0.4
0.2
6DPSOLQJUDWH ȝV
Average number of
VDPSOHV
í0.2
Vertical positioning
0.05°
0°
í0.05°
í
0
HL-G108A-R□
Horizontal positioning
6DPSOLQJUDWH ȝV
Average number of
samples: 1024
0.2
Measuring distance L (mm in)
0.4
0.1°
0°
í0.1°
6DPSOLQJUDWH ȝV
Average number of
VDPSOHV
í0.2
Specular reflection type
0.4
Horizontal positioning
0.4
0.5°
0°
í0.5°
0
Measuring distance L (mm in)
Vertical positioning
í0.4
í5.0
í0.197
6DPSOLQJUDWH ȝV
Average number of
samples: 1024
0
0HDVXULQJGLVWDQFH/ PPin)
0.2
Vertical positioning
0.4
10°
0°
í10°
í0.2
í
0
í (Center)
Specular reflection type
0.2
í
6DPSOLQJUDWH ȝV
Average number of
samples: 1024
0
í0.2
í
0
í (Center)
Measuring distance L (mm in)
10.0
0.394
í0.4
í10.0
í0.394
í
0
í (Center)
Measuring distance L (mm in)
10.0
0.394
IP67 (IEC)
–10 to +45 °C +14 to +113 °F (No dew condensation), Storage: –20 to +60 °C –4 to +140 °F (No dew condensation)
Accessory
Detecting rotating direction of fan
6DPSOLQJUDWH ȝV
Average number of
VDPSOHV
Measuring distance L (mm in)
Red LED 5.5 digit display
Protection
Material
Diffuse reflection type
Horizontal positioning
0.4
10°
0°
í10°
Green LED (lights up during laser emission)
Alarm
Ambient temperature
9HUWLFDOSRVLWLRQLQJ
HL-G105A-R□
Incorporated (automatic restoration)
Digital display
Measuring the
eccentricity of a metal shaft
• Maximum source current : 50 mA
• Residual voltage : 2.8 V or less (at 50 mA of source current)
HL-G103A-R□
Diffuse reflection type
í
Judgment output or alarm output (setting selectable)
NPN transistor, open-collector / PNP transistor, open-collector (selectable)
Specular reflection type
HL-G125□
Current
Diffuse reflection type
L
Measuring
object
0.4
Output range: 0 to 10.5 V (normal) / 11 V (at alarm), Output impedance: 100 Ω
Timing input
Detecting presence of O-ring
0.2 × 0.2 mm
0.008 × 0.008 in
Voltage
Output polarity setting input
L
100 mA max.
Short circuit protection
Positioning of wafer
í
Sensor head
Measuring
object
24 V DC ±10 % including ripple 0.5 V (P-P)
Output operation
Inspecting processed
food quantities
0.1 × 0.1 mm
0.004 × 0.004 in
CMOS image sensor
Current consumption
Output
(OUT 1, OUT 2, OUT 3)
+
±0.08 % F.S. / °C
Receiving element
Analog
output
+
Sensor head
±0.2 % F.S.
Red semiconductor laser, Class 2 (Class 1 for specular reflection type) (IEC / JIS / FDA, Laser Notice No. 50)
Max. output: 1 mW (0.39mW for specular reflection type) Peak emission wavelength: 655 nm 0.026 mil
Supply voltage
Diffuse reflection type
í
White ceramic
Horizontal orientation
Error (% F.S.)
Measurement range: 30 ±4 mm 1.181 ±0.157 in
0.5 μm 0.020 mil
Resolution:
Linearity:
±0.1 % F.S.
Beam diameter: 0.1 × 0.1 mm 0.004 × 0.004 in
Measurement center
distance
White ceramic
Vertical orientation
Error (% F.S.)
HL-G103A□
High function type HL-G103-S-J HL-G105-S-J HL-G108-S-J HL-G112-S-J HL-G125-S-J HL-G103A-RS-J HL-G105A-RS-J HL-G108A-RS-J
Error (% F.S.)
HL-G103□
Correlation between measuring distance and error characteristics
Standard type HL-G103-A-C5 HL-G105-A-C5 HL-G108-A-C5 HL-G112-A-C5 HL-G125-A-C5 HL-G103A-RA-C5 HL-G105A-RA-C5 HL-G108A-RA-C5
Error (% F.S.)
Specular reflection type
Specular reflection type
Error (% F.S.)
Item
Diffuse reflection type
Error (% F.S.)
Model No.
Type
For sensing characteristics diagrams for the diffuse reflection type
(other than the HL-G125□), refer to the HL-G1 catalog or our website.
SENSING CHARACTERISTICS (TYPICAL)
Error (% F.S.)
A total of 8 models accommodate a variety of applications
Diffuse reflection type
For more information about I/O circuit diagrams and communication specifications
of the high-function type, refer to the HL-G1 catalog or our website.
SPECIFICATIONS
Error (% F.S.)
Extensive selection
Appearance
Model No.
Description
HL-G1CCJ2
Length: 2 m 6.562 ft, Weight: 130 g approx.
HL-G1CCJ5
Length: 5 m 16.404 ft, Weight: 320 g approx.
HL-G1CCJ10
Length: 10 m 32.808 ft, Weight: 630 g approx.
HL-G1CCJ20
Length: 20 m 65.617 ft, Weight: 1300 g approx.
14-core cabtyre cable
with connector on both
ends
PRECAUTIONS FOR PROPER USE
• This product has been developed / produced for
industrial use.
• Never use this product as a sensing device for
personnel protection.
• In case of using sensing devices for personnel
protection, use products which meet laws and
standards, such as OSHA, ANSI or IEC etc., for
personnel protection applicable in each region or
country.
• Do not operate products using methods other
than the ones described in the instruction manual
included with each product. Control or adjustment
through procedures other than the ones specified
may cause hazardous laser radiation exposure.
• The following label is attached to the product.
Handle the product according to the instruction
given on the warning label.
The Japanes, English, Chinese, Korean warning
label is packed with the sensor.
(
)
• This product is classified as a Class 2
(specular reflection type: Class 1) Laser
Product under IEC / JIS standards and
FDA regulations. Do not look at the laser
beam directly or through an optical system
such as a lens.
(A Class 2 label is shown above.)
Measurement range: 26.3 ±2 mm 1.035 ±0.079 in
0.5 μm 0.020 mil
Resolution:
Linearity:
±0.2 % F.S.
Beam diameter: 0.1 × 0.1 mm 0.004 × 0.004 in
30 mm
1.181 in
50 mm
1.969 in
85 mm
3.346 in
120 mm
4.724 in
250 mm
9.843 in
26.3 mm
1.035 in
47.3 mm
1.862 in
82.9 mm
3.264 in
Measuring range
±4 mm
±0.157 in
±10 mm
±0.394 in
±20 mm
±0.787 in
±60 mm
±2.362 in
±150 mm
±5.906 in
±2 mm
±0.079 in
±5 mm
±0.197 in
±10 mm
±0.394 in
Resolution
0.5 μm
0.020 mil
1.5 μm
0.059 mil
2.5 μm
0.098 mil
8 μm
0.315 mil
20 μm
0.787 mil
0.5 μm
0.020 mil
1.5 μm
0.059 mil
2.5 μm
0.098 mil
Linearity
±0.1 % F.S.
±0.3 % F.S.
Temprerature characteristics
Light source
Beam diameter (Note 2)
Controlling the height of
a dispenser nozzle
Measuring HDD surface fluctuation
Specular reflection type
HL-G105□
HL-G105A□
Measurement range: 50 ±10mm 1.969 ±0.394 in
1.5 μm 0.059 mil
Resolution:
Linearity:
±0.1 % F.S.
Beam diameter: 0.5 × 1.0 mm 0.020 × 0.039 in
Measurement range: 47.3 ±5 mm 1.862 ±0.197 in
1.5 μm 0.059 mil
Resolution:
Linearity:
±0.2 % F.S.
Beam diameter: 0.1 × 0.1 mm 0.004 × 0.004 in
0.1 × 0.1 mm
0.5 ×1.0 mm
0.75 × 1.25 mm 1.0 × 1.5 mm
1.75 × 3.5 mm
0.004 × 0.004 in 0.020 × 0.039 in 0.030 × 0.049 in 0.039 × 0.059 in 0.069 × 0.138 in
Sampling rate
200 μs, 500 μs, 1 ms, 2 ms
Output range: 3.2 to 20.8 mA (normal) / 21.6 mA (at alarm), Load impedance: 300 Ω max.
• Maximum sink current : 50 mA
• Applied voltage : 3 to 24 V DC (between output and 0 V)
• Residual voltage : 2 V or less (at 50 mA of sink current)
HL-G108A□
Multi input
Measurement range: 85 ±20 mm 3.346 ±0.787 in
2.5 μm 0.098 mil
Resolution:
Linearity:
±0.1 % F.S.
Beam diameter: 0.75 ×1.25 mm 0.030×0.049 in
Measurement range: 82.9 ±10 mm 3.264 ±0.394 in
2.5 μm 0.098 mil
Resolution:
Linearity:
±0.2 % F.S.
Beam diameter: 0.2 × 0.2 mm 0.008 × 0.008 in
Communications
interface (high-function
type only)
Indicator
HL-G108□
Open when the output is ON.
NPN open collector output operates when 0 V is connected. PNP open collector output operates when 24 V DC is connected.
NPN output operates when 0 V is connected and NPN is set (depending on settings).
PNP output operates when external power + is connected and PNP is set (depending on settings).
Zero set, zero set off, reset, memory switching, teaching, saving, and laser control according to the input time.
In case NPN output is selected, function varies according to the time 0 V is connected NPN.
In case PNP output is selected, function varies according to the time external power + is connected.
RS-422 or RS-485 (selectable)
Baud rate: 9,600 / 19,200 / 38,400 / 115,200 / 230,400 / 460,800 / 921,600 bps
Data length 8 bit, stop bit length 1 bit, without parity check, BCC check, termination code: CR
Laser emission
Orange LED (lights up when this product cannot measure because of insufficient or excessive light intensity)
Output
Yellow LED x 3
Cable
Cable extension
Weight
HL-G112□
Measurement range: 120 ±60 mm
4.724 ±2.362 in
8 μm 0.315 mil
Resolution:
Linearity:
±0.1 % F.S.
Beam diameter: 1.0 × 1.5 mm
0.039 × 0.059 in
Enclosure: PBT, front cover: acrylic, cable: PVC
Standard type: 0.1 mm2 10-core cabtyre cable, 5 m 16.404 ft long, high functionality type: 14-core cabtyre cable with connector, 0.5 m 1.640 ft long
Extension up to total 20 m 65.617 ft is possible with optional cable (Cable for standard type cannot be extended).
Standard type
Net weight: 70 g approx. (not including cable), 320 g approx. (including cable), gross weight: 380 g approx.
High functionality type
Net weight: 70 g approx. (not including cable), 110 g approx. (including cable), gross weight: 160 g approx.
Warning label: 1 set
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were as follows: supply voltage 24 V DC, ambient temperature
+20 °C +68 °F, sampling rate 500 μs, average number of samples: 1024, measurement center distance, object measured is made of white ceramic
and analog measurement values.
2) This beam diameter is the size at the measurement center distance. These values were defined by using 1/e2 (13.5 %) of the center light intensity.
The results may be affected if there is a slight leakage of light outside the normal spot diameter and if the periphery surrounding the sensing point has
a higher reflectivity than the sensing point itself.
OPTIONS
Diffuse reflection type
HL-G125□
Type
Measurement range: 250 ±150 mm
9.843 ±5.906 in
20 μm 0.787 mil
Resolution:
Linearity:
±0.3 % F.S.
Beam diameter: 1.75 × 3.5 mm
0.069 × 0.138 in
Extension
cable (for High
function type)
Testing sheet slack
0
í0.4
í150
í5.906
0.2
150
5.906
0.2
í0.4
í150
í5.906
í
0
í (Center)
150
5.906
í0.4
í2.0
í0.079
0.2
0
í0.2
0
í0.2
í
0
í (Center)
2.5
5.0
0.197
í0.4
í5.0
í0.197
í
0
í (Center)
2.0
0.079
í0.4
í2.0
í0.079
í
0
í (Center)
2.5
5.0
0.197
Measuring distance L (mm in)
2.0
0.079
Horizontal positioning
0.4
0.1°
0°
í0.1°
6DPSOLQJUDWH ȝV
Average number of
samples: 1024
0
í0.4
í10.0
í0.394
Specular reflection type
í0.2
6DPSOLQJUDWH ȝV
Average number of
samples: 1024
í
0
í (Center)
Measuring distance L (mm in)
0.4
0.2
6DPSOLQJUDWH ȝV
Average number of
VDPSOHV
í0.2
Vertical positioning
0.05°
0°
í0.05°
í
0
HL-G108A-R□
Horizontal positioning
6DPSOLQJUDWH ȝV
Average number of
samples: 1024
0.2
Measuring distance L (mm in)
0.4
0.1°
0°
í0.1°
6DPSOLQJUDWH ȝV
Average number of
VDPSOHV
í0.2
Specular reflection type
0.4
Horizontal positioning
0.4
0.5°
0°
í0.5°
0
Measuring distance L (mm in)
Vertical positioning
í0.4
í5.0
í0.197
6DPSOLQJUDWH ȝV
Average number of
samples: 1024
0
0HDVXULQJGLVWDQFH/ PPin)
0.2
Vertical positioning
0.4
10°
0°
í10°
í0.2
í
0
í (Center)
Specular reflection type
0.2
í
6DPSOLQJUDWH ȝV
Average number of
samples: 1024
0
í0.2
í
0
í (Center)
Measuring distance L (mm in)
10.0
0.394
í0.4
í10.0
í0.394
í
0
í (Center)
Measuring distance L (mm in)
10.0
0.394
IP67 (IEC)
–10 to +45 °C +14 to +113 °F (No dew condensation), Storage: –20 to +60 °C –4 to +140 °F (No dew condensation)
Accessory
Detecting rotating direction of fan
6DPSOLQJUDWH ȝV
Average number of
VDPSOHV
Measuring distance L (mm in)
Red LED 5.5 digit display
Protection
Material
Diffuse reflection type
Horizontal positioning
0.4
10°
0°
í10°
Green LED (lights up during laser emission)
Alarm
Ambient temperature
9HUWLFDOSRVLWLRQLQJ
HL-G105A-R□
Incorporated (automatic restoration)
Digital display
Measuring the
eccentricity of a metal shaft
• Maximum source current : 50 mA
• Residual voltage : 2.8 V or less (at 50 mA of source current)
HL-G103A-R□
Diffuse reflection type
í
Judgment output or alarm output (setting selectable)
NPN transistor, open-collector / PNP transistor, open-collector (selectable)
Specular reflection type
HL-G125□
Current
Diffuse reflection type
L
Measuring
object
0.4
Output range: 0 to 10.5 V (normal) / 11 V (at alarm), Output impedance: 100 Ω
Timing input
Detecting presence of O-ring
0.2 × 0.2 mm
0.008 × 0.008 in
Voltage
Output polarity setting input
L
100 mA max.
Short circuit protection
Positioning of wafer
í
Sensor head
Measuring
object
24 V DC ±10 % including ripple 0.5 V (P-P)
Output operation
Inspecting processed
food quantities
0.1 × 0.1 mm
0.004 × 0.004 in
CMOS image sensor
Current consumption
Output
(OUT 1, OUT 2, OUT 3)
+
±0.08 % F.S. / °C
Receiving element
Analog
output
+
Sensor head
±0.2 % F.S.
Red semiconductor laser, Class 2 (Class 1 for specular reflection type) (IEC / JIS / FDA, Laser Notice No. 50)
Max. output: 1 mW (0.39mW for specular reflection type) Peak emission wavelength: 655 nm 0.026 mil
Supply voltage
Diffuse reflection type
í
White ceramic
Horizontal orientation
Error (% F.S.)
Measurement range: 30 ±4 mm 1.181 ±0.157 in
0.5 μm 0.020 mil
Resolution:
Linearity:
±0.1 % F.S.
Beam diameter: 0.1 × 0.1 mm 0.004 × 0.004 in
Measurement center
distance
White ceramic
Vertical orientation
Error (% F.S.)
HL-G103A□
High function type HL-G103-S-J HL-G105-S-J HL-G108-S-J HL-G112-S-J HL-G125-S-J HL-G103A-RS-J HL-G105A-RS-J HL-G108A-RS-J
Error (% F.S.)
HL-G103□
Correlation between measuring distance and error characteristics
Standard type HL-G103-A-C5 HL-G105-A-C5 HL-G108-A-C5 HL-G112-A-C5 HL-G125-A-C5 HL-G103A-RA-C5 HL-G105A-RA-C5 HL-G108A-RA-C5
Error (% F.S.)
Specular reflection type
Specular reflection type
Error (% F.S.)
Item
Diffuse reflection type
Error (% F.S.)
Model No.
Type
For sensing characteristics diagrams for the diffuse reflection type
(other than the HL-G125□), refer to the HL-G1 catalog or our website.
SENSING CHARACTERISTICS (TYPICAL)
Error (% F.S.)
A total of 8 models accommodate a variety of applications
Diffuse reflection type
For more information about I/O circuit diagrams and communication specifications
of the high-function type, refer to the HL-G1 catalog or our website.
SPECIFICATIONS
Error (% F.S.)
Extensive selection
Appearance
Model No.
Description
HL-G1CCJ2
Length: 2 m 6.562 ft, Weight: 130 g approx.
HL-G1CCJ5
Length: 5 m 16.404 ft, Weight: 320 g approx.
HL-G1CCJ10
Length: 10 m 32.808 ft, Weight: 630 g approx.
HL-G1CCJ20
Length: 20 m 65.617 ft, Weight: 1300 g approx.
14-core cabtyre cable
with connector on both
ends
PRECAUTIONS FOR PROPER USE
• This product has been developed / produced for
industrial use.
• Never use this product as a sensing device for
personnel protection.
• In case of using sensing devices for personnel
protection, use products which meet laws and
standards, such as OSHA, ANSI or IEC etc., for
personnel protection applicable in each region or
country.
• Do not operate products using methods other
than the ones described in the instruction manual
included with each product. Control or adjustment
through procedures other than the ones specified
may cause hazardous laser radiation exposure.
• The following label is attached to the product.
Handle the product according to the instruction
given on the warning label.
The Japanes, English, Chinese, Korean warning
label is packed with the sensor.
(
)
• This product is classified as a Class 2
(specular reflection type: Class 1) Laser
Product under IEC / JIS standards and
FDA regulations. Do not look at the laser
beam directly or through an optical system
such as a lens.
(A Class 2 label is shown above.)
A variety of high-end functions are included in a compact,
self-contained body for exceptional ease of use
Easy input settings while looking at digital display
The built-in digital display makes it easy to perform sensor setting
while checking displacement values.
5.5 digit, 7-segment LED display
UP key
HL-G125-A-C5 HL-G125-S-J
Easy to embed in machines and production
lines thanks to a built-in controller
20.4
0.803
2-ø 4.5 ø 0.177
51.4
2.024
60
2.362
Beam-receiving axis
47.5
1.870
57 2.244
49.4 1.945
70
47.5 1.8
ft
ø6.85
ø0.270
0.5
m
15°
Equipped on HL-G125-S-J only
ø12.5
ø0.492
4
1. 3
1.6 693
40
ft
Specular reflection type
Equipped on HL-G103A-RS-J only
Lightweight body that can be
installed on movable parts
Its lightweight resin body weighs 70 g approx., which can be
installed on moving parts such as sliders and robot arms.
Cable with superior flexibility is fitted as standard.
Height: 60 mm 2.362 in
Ideal for measuring mirrored objects
62.4
2.457
33
1.299
0
64
1.
ø12.5
ø0.492
43 93
6
1.
HL-G1
2-ø 4.5 ø 0.177
72.3
2.846
Beamreceiving axis
m
Amplifier separated type sensor
Depth: 57 mm
2.244 in
Diffuse reflection type
66.6 2.622
34.41
1.355
Flexible
cable
HL-G105A-RA-C5 HL-G105A-RS-J
5.5 digit LED display (Red)
Alarm indicator (Orange)
Laser emission indicator (Green)
20.4
0.803
64.2 2.528
39.32
1.548
Software tool for sensor
configuration and evaluation
In addition to configuring up to 16 sensors at once, this free tool makes
it easy to gather data needed for analysis, such as received light
waveform monitoring and data buffering. The interface language can
be selected at the time of installation.
● Data buffering
Stores and displays measurement data, which can be superimposed on
previously recorded data for easy comparison and analysis.
● Received light waveform display
Displays the amount of light received by cell from light-receiving element.
● Measured value display
Displays measured values as well as the output state for each terminal.
HMI screen data for sensor
setting and data indication
The GT02 / GT12 series HMI
can be used in combination
with the HL-G1 to allow easy
confirmation of sensor status and
configuration of sensor settings
from a remote location. Japanese,
English, Chinese, and Korean are
supported. For more information
about the GT series, visit our
website or refer to our catalog.
Select from the following HMI
operator panels:
Power supply: 24 V
Communication port: RS422
(RS485)
● AIG02GQ14D
● AIG02MQ15D
● AIG12GQ14D / AIG12GQ15D
● AIG12MQ14D / AIG12MQ15D
66.8
2.630
Beamreceiving axis
7.53°
ø12.5
ø0.492
ø6.85
ø0.270
0.
5
m
4
1. 1.6 3
64 93
0
ft
ø12.5
ø0.492
L
Model No.
L
HL-G1CCJ2
2,000 +2000
78.740 +7.8740
5,000 +5000
196.850 +19.6850
10,000 +1,0000
393.701 +39.3700
20,000 +2,0000
787.402 +78.7400
2013.12
31.2
1.228
Equipped on HL-G108A-RS-J only
Extension cable
HL-G1CCJ10
66.8
2.630
57.4
2.260
Extension cable (optional)
(43 1.693)
ø 12.5
ø 0.492
panasonic.net/id/pidsx/global
ø 6.85 ø 0.270 cable
14-core × 0.1 mm2
Insulator diameter: ø 0.7 mm ø 0.028 in
(RS-422/485 communication cable:
ø 1.0 mm ø 0.039 in)
(50 1.969)
Panasonic Industrial Devices SUNX Co., Ltd.
Global Sales Department
Sensor configuration and evaluation software tool, HMI screen data, function blocks, etc.
Terms of use
Panasonic Industrial Devices SUNX offers no warranty for this software and is not liable for any loss or damage suffered as a result of its use or operation,
whether direct, indirect, incidental, consequential, or unforeseen.
ø6.85
ø0.270
0.5
4
m
1.6 1.693
3
40
ft
2-ø 4.5 ø 0.177
15.05°
HL-G1CCJ□
HL-G1CCJ20
Software is available for download.
Beam-emitting axis
Equipped on HL-G105A-RS-J only
HL-G1CCJ5
62.3 2.453
42.24
1.663
47.5
1.870
10.39°
OUT 1 indicator (Yellow)
OUT 2 indicator (Yellow)
OUT 3 indicator (Yellow)
UP key
DOWN key
Measurement
center distance
82.9 3.264
10.75 0.423
20.4
0.803
69
2.717
59.5
2.343
32.8
1.291
69
2.717
Sensor head
ENTER key
2-ø 4.5 ø 0.177
20.77°
Beamreceiving axis
5.5 digit LED display (Red)
Alarm indicator (Orange)
Laser emission indicator (Green)
UP key
DOWN key
47.5
1.870
Thanks to its IP67 protective
enclosure, the HL-G1 can be used in
the presence of water and dust.
Mounting holes are lined with metal
sleeves, allowing the instrument to be
tightened securely in place with up to
0.8 N·m of torque.
Measurement
center distance
47.3
1.862
13.4
0.528
Beam-emitting axis
HL-G108A-RA-C5 HL-G108A-RS-J
OUT 1 indicator (Yellow)
OUT 2 indicator (Yellow)
OUT 3 indicator (Yellow)
ENTER key
IP67 protective enclosure protects
from water and dust
Sensor head
No.CE-HLG1A-4 December, 2013
2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan
Telephone: +81-568-33-7861
Facsimile: +81-568-33-8591
All Rights Reserved ©Panasonic Industrial Devices SUNX Co., Ltd. 2013
Ŷ
Laser Displacement Sensor
Diffuse reflection type HL-G125Ƒ
Specular reflection type HL-G10ƑAƑ
Measure distances as long as 250mm
30°
4.3 ø 6.85 ø 0.270
0.169
Width: 20.4 mm
0.803 in
New models
UP key
DOWN key
Measurement
center distance
26.3
1.035
17.5
0.689
Beamemitting axis
72.3
2.846
5
0.
DOWN key
Sensor head
OUT 1 indicator (Yellow)
OUT 2 indicator (Yellow)
OUT 3 indicator (Yellow)
ENTER key
UP key
DOWN key
Measurement
center distance
250 9.843
3.8
Beam0.150
emitting axis
6.2°
20.4
0.803
HL-G103A-RA-C5 HL-G103A-RS-J
5.5 digit LED display (Red)
Alarm indicator (Orange)
Laser emission indicator (Green)
OUT 1 indicator (Yellow)
OUT 2 indicator (Yellow)
OUT 3 indicator (Yellow)
ENTER key
Controller installation and mounting space is not required because
controller function is included in sensor unit.
ENTER key
Sensor head
5.5 digit LED display (Red)
Alarm indicator (Orange)
Laser emission indicator (Green)
Compact
For dimensions of the diffuse reflection type (other than the HL-G125□), refer to the HL-G1
catalog or our website. CAD data for dimensional diagrams can be downloaded from our website.
DIMENSIONS (Unit: mm in)
Ŷ
2013.12
panasonic.net/id/pidsx/global
Conforming to
EMC Directive
Conforming to
FDA regulations
A variety of high-end functions are included in a compact,
self-contained body for exceptional ease of use
Easy input settings while looking at digital display
The built-in digital display makes it easy to perform sensor setting
while checking displacement values.
5.5 digit, 7-segment LED display
UP key
HL-G125-A-C5 HL-G125-S-J
Easy to embed in machines and production
lines thanks to a built-in controller
20.4
0.803
2-ø 4.5 ø 0.177
51.4
2.024
60
2.362
Beam-receiving axis
47.5
1.870
57 2.244
49.4 1.945
70
47.5 1.8
ft
ø6.85
ø0.270
0.5
m
15°
Equipped on HL-G125-S-J only
ø12.5
ø0.492
4
1. 3
1.6 693
40
ft
Specular reflection type
Equipped on HL-G103A-RS-J only
Lightweight body that can be
installed on movable parts
Its lightweight resin body weighs 70 g approx., which can be
installed on moving parts such as sliders and robot arms.
Cable with superior flexibility is fitted as standard.
Height: 60 mm 2.362 in
Ideal for measuring mirrored objects
62.4
2.457
33
1.299
0
64
1.
ø12.5
ø0.492
43 93
6
1.
HL-G1
2-ø 4.5 ø 0.177
72.3
2.846
Beamreceiving axis
m
Amplifier separated type sensor
Depth: 57 mm
2.244 in
Diffuse reflection type
66.6 2.622
34.41
1.355
Flexible
cable
HL-G105A-RA-C5 HL-G105A-RS-J
5.5 digit LED display (Red)
Alarm indicator (Orange)
Laser emission indicator (Green)
20.4
0.803
64.2 2.528
39.32
1.548
Software tool for sensor
configuration and evaluation
In addition to configuring up to 16 sensors at once, this free tool makes
it easy to gather data needed for analysis, such as received light
waveform monitoring and data buffering. The interface language can
be selected at the time of installation.
● Data buffering
Stores and displays measurement data, which can be superimposed on
previously recorded data for easy comparison and analysis.
● Received light waveform display
Displays the amount of light received by cell from light-receiving element.
● Measured value display
Displays measured values as well as the output state for each terminal.
HMI screen data for sensor
setting and data indication
The GT02 / GT12 series HMI
can be used in combination
with the HL-G1 to allow easy
confirmation of sensor status and
configuration of sensor settings
from a remote location. Japanese,
English, Chinese, and Korean are
supported. For more information
about the GT series, visit our
website or refer to our catalog.
Select from the following HMI
operator panels:
Power supply: 24 V
Communication port: RS422
(RS485)
● AIG02GQ14D
● AIG02MQ15D
● AIG12GQ14D / AIG12GQ15D
● AIG12MQ14D / AIG12MQ15D
66.8
2.630
Beamreceiving axis
7.53°
ø12.5
ø0.492
ø6.85
ø0.270
0.
5
m
4
1. 1.6 3
64 93
0
ft
ø12.5
ø0.492
L
Model No.
L
HL-G1CCJ2
2,000 +2000
78.740 +7.8740
5,000 +5000
196.850 +19.6850
10,000 +1,0000
393.701 +39.3700
20,000 +2,0000
787.402 +78.7400
2013.12
31.2
1.228
Equipped on HL-G108A-RS-J only
Extension cable
HL-G1CCJ10
66.8
2.630
57.4
2.260
Extension cable (optional)
(43 1.693)
ø 12.5
ø 0.492
panasonic.net/id/pidsx/global
ø 6.85 ø 0.270 cable
14-core × 0.1 mm2
Insulator diameter: ø 0.7 mm ø 0.028 in
(RS-422/485 communication cable:
ø 1.0 mm ø 0.039 in)
(50 1.969)
Panasonic Industrial Devices SUNX Co., Ltd.
Global Sales Department
Sensor configuration and evaluation software tool, HMI screen data, function blocks, etc.
Terms of use
Panasonic Industrial Devices SUNX offers no warranty for this software and is not liable for any loss or damage suffered as a result of its use or operation,
whether direct, indirect, incidental, consequential, or unforeseen.
ø6.85
ø0.270
0.5
4
m
1.6 1.693
3
40
ft
2-ø 4.5 ø 0.177
15.05°
HL-G1CCJ□
HL-G1CCJ20
Software is available for download.
Beam-emitting axis
Equipped on HL-G105A-RS-J only
HL-G1CCJ5
62.3 2.453
42.24
1.663
47.5
1.870
10.39°
OUT 1 indicator (Yellow)
OUT 2 indicator (Yellow)
OUT 3 indicator (Yellow)
UP key
DOWN key
Measurement
center distance
82.9 3.264
10.75 0.423
20.4
0.803
69
2.717
59.5
2.343
32.8
1.291
69
2.717
Sensor head
ENTER key
2-ø 4.5 ø 0.177
20.77°
Beamreceiving axis
5.5 digit LED display (Red)
Alarm indicator (Orange)
Laser emission indicator (Green)
UP key
DOWN key
47.5
1.870
Thanks to its IP67 protective
enclosure, the HL-G1 can be used in
the presence of water and dust.
Mounting holes are lined with metal
sleeves, allowing the instrument to be
tightened securely in place with up to
0.8 N·m of torque.
Measurement
center distance
47.3
1.862
13.4
0.528
Beam-emitting axis
HL-G108A-RA-C5 HL-G108A-RS-J
OUT 1 indicator (Yellow)
OUT 2 indicator (Yellow)
OUT 3 indicator (Yellow)
ENTER key
IP67 protective enclosure protects
from water and dust
Sensor head
No.CE-HLG1A-4 December, 2013
2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan
Telephone: +81-568-33-7861
Facsimile: +81-568-33-8591
All Rights Reserved ©Panasonic Industrial Devices SUNX Co., Ltd. 2013
Ŷ
Laser Displacement Sensor
Diffuse reflection type HL-G125Ƒ
Specular reflection type HL-G10ƑAƑ
Measure distances as long as 250mm
30°
4.3 ø 6.85 ø 0.270
0.169
Width: 20.4 mm
0.803 in
New models
UP key
DOWN key
Measurement
center distance
26.3
1.035
17.5
0.689
Beamemitting axis
72.3
2.846
5
0.
DOWN key
Sensor head
OUT 1 indicator (Yellow)
OUT 2 indicator (Yellow)
OUT 3 indicator (Yellow)
ENTER key
UP key
DOWN key
Measurement
center distance
250 9.843
3.8
Beam0.150
emitting axis
6.2°
20.4
0.803
HL-G103A-RA-C5 HL-G103A-RS-J
5.5 digit LED display (Red)
Alarm indicator (Orange)
Laser emission indicator (Green)
OUT 1 indicator (Yellow)
OUT 2 indicator (Yellow)
OUT 3 indicator (Yellow)
ENTER key
Controller installation and mounting space is not required because
controller function is included in sensor unit.
ENTER key
Sensor head
5.5 digit LED display (Red)
Alarm indicator (Orange)
Laser emission indicator (Green)
Compact
For dimensions of the diffuse reflection type (other than the HL-G125□), refer to the HL-G1
catalog or our website. CAD data for dimensional diagrams can be downloaded from our website.
DIMENSIONS (Unit: mm in)
Ŷ
2013.12
panasonic.net/id/pidsx/global
Conforming to
EMC Directive
Conforming to
FDA regulations
工商网监
湘ICP备2023018690号
