JC1A-DC12V

VDE COMPACT POWER RELAYS 30.0 1.181 JC JC RELAYS FEATURES 19.0 .748 30.0 1.181 19.0 .748 30.4 1.197 32.4 1.276 PC board type Plug-in type 19.0 .748 • High inrush current capability 1 Form A: 163 A inrush (TV-8) 2 Form A: 111 A inrush (TV-5) • High dielectric withstanding for transient protection: JC can withstand 10,000 V surge in µs between coil and contact. • Electrical life: 1 Form A: 105 ope. at 15 A 250 V AC resistive load 2 Form A: 105 ope. at 10 A 250 V AC resistive load • UL/CSA, VDE, TÜV, SEMKO also approved. COMMENTS ABOUT Cd FREE 32.9 1.295 45.0 1.772 mm inch TM type We have introduced Cadmium free type products to reduce the material which is not good for our environment. (The suffix “F” should be added to the part number.) If you are still using Cadmium containing parts, which don’t have “F” on the suffix of the part number, please use Cadmium free parts from now on. The life of the Cadmium free parts may be shorter than the Cadmium containing parts based on the load condition, so please evaluate the Cadmium free parts with your actual application before use. RoHS Directive compatibility information http://www.nais-e.com/ SPECIFICATIONS Contact Characteristics Arrangement Initial contact resistance, max. (By voltage drop 6 V DC 1 A) Contact material Contact force, min. Maximum switching power Rating Maximum switching voltage (resistive Max. switching current load) Min. switching capacity#1 Expected Mechanical life (min. Electrical 10 A 250 V AC operation) (resistive) 5A 250 V AC 1 Form A 2 Form A 30 mΩ AgSnO2 type 30 g 3,750 VA 2,500 VA 250 V AC 250 V AC 15 A 10 A 100 mA, 5 V DC 5×106 5 10 — — 105 Coil Nominal operating power 900 mW 1,000 mW #1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. Remarks * Specifications will vary with foreign standards certification ratings. *1 Measurement of same location as “Initial breakdown voltage” section *2 Detection current: 10mA *3 Excluding contact bounce time *4 Half-wave pulse of sine wave: 11ms; detection time: 10µs *5 Half-wave pulse of sine wave: 6ms *6 Detection time: 10µs *7 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT Maximum operating speed Initial insulation resistance*1 Between open contacts Initial Between contacts sets breakdown Between contacts and voltage*2 coil Operate time*3 (at nominal voltage) Release time(without diode)*3 (at nominal voltage) Temperature rise (at nominal voltage) Functional*4 Shock resistance Destructive*5 Vibration resistance Functional*6 Destructive Conditions for operation, Ambient transport and storage*7 temp. (Not freezing and condensHumidity ing at low temperature) Unit weight All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd. 20 cpm. Min. 100 MΩ at 500 V DC 2,000 V rms for 1 min. 2,000 Vrms for 1 min. 4,000 Vrms for 1 min. Max. 30 ms Max. 10 ms Max. 55°C 196 m/s2 {20 G} 980 m/s2 {100 G} 98 m/s2 {10 G}, 10 to 55 Hz at double amplitude of 1.6 mm 117.6 m/s2 {12 G}, 10 to 55 Hz at double amplitude of 2 mm –50°C to +60°C –58°F to +140°F 5 to 85%R.H. Approx. 31 g 1.09 oz JC TYPICAL APPLICATIONS ORDERING INFORMATION Ex. JC Automatic garage door openers Microwave ovens Dryers Vending machines Copiers Air conditioners Stereo equipment TV sets 1a F TM DC12V F Contact arrangement Mounting classification Coil voltage Contact material 1a: 1 Form A 2a: 2 Form A Nil: PC board terminal S: Plug-in terminal TM: Top mounting DC 5, 6, 12, 24, 48 V F: AgSnO2 type (Notes) 1. TV rated types available 1 Form A: TV-8; 2 Form A: TV-5. 2. Standard packing Carton: 50 pcs.; Case: 200 pcs. 3. UL/CSA, VDE, TÜV, and SEMKO certified products can also be supported. Please consult us. 4. Please inquire about the previous products (Cadmium containing parts). COIL DATA (at 20°C 68°F) Contact Nominal voltage. arrangement V DC 1 Form A 2 Form A Pick-up voltage. V DC (max.) Drop-out voltage. V DC (min.) Coil resistance, Ω(±10%) 4.8 9.6 19.2 38.4 4.8 9.6 19.2 38.4 0.6 1.2 2.4 4.8 0.6 1.2 2.4 4.8 40 160 640 2,560 36 144 576 2,304 6 12 24 48 6 12 24 48 Nominal operating current, mA 150 75 37.5 18.8 166.6 83.3 41.6 20.8 Maximum allowable voltage, V DC (at 60°C) 6.6 13.2 26.4 52.8 6.6 13.2 26.4 52.8 Nominal operating power, W 0.9 0.9 0.9 0.9 1.0 1.0 1.0 1.0 DIMENSIONS mm inch PC board type JC1a Schematic 6 Coil terminal Common terminal 30 1.181 1 5 N.O. terminal 4 .157 1.5 .059 6 14 .551 6.9 .272 PC board pattern (Bottom view) 1.5 .059 14 .551 3 0.4 .016 0.9 DIA. .035 DIA. 0.5 0.5 .020 .020 Relay outline 1 5 2 4 3 10 .394 19 .748 15.2 .598 30 1.181 1 6 7.6 .299 3.1 .122 2-1.2 DIA. HOLES .047 DIA. HOLES 3 2.54×4 19 .100×4 .748 5 2.54×6 .100×6 2.54×3 30 1.181 .100×3 PC board type JC2a 2-1.8 DIA. HOLES .071 DIA. HOLES 3.1 .122 Schematic Coil terminal 6 Common terminal 5 2 N.O. terminal 4 3 1 30 1.181 0.4 .016 4 .157 1.5 .059 14 .551 6.9 .272 1.5 .059 14 .551 6 1 5 2 4 3 10 .394 19 .748 0.9 DIA. .035 DIA. PC board pattern (Bottom view) 0.5 0.5 .020 .020 Relay outline 15.2 .598 30 1.181 1 6 7.6 .299 3.1 .122 2-1.2 DIA. HOLES .047 DIA. HOLES General tolerance: ±0.3 ±.012 All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd. 2 5 3 4 2.54×4 19 .100×4 .748 2.54×6 4-1.8 DIA. HOLES .100×6 2.54×3 3.1 .071 DIA. HOLES .122 30 .100×3 1.181 Tolerance: ±0.1 ±.004 JC Top mount type mm inch 1a 2a 45 1.772 45 1.772 2 .079 2 .079 30.5 1.201 30.5 1.201 1.4 DIA. .055 3.1 .122 2-3.2 DIA. 2-.126 DIA. 2.5 .098 0.5 .020 Accept Faston 187 3.1 .122 Hole spacing 37.6 1.480 3.6 .142 10.7 .421 26.7 1.051 30 1.181 37.6 1.480 2 5 MADE IN JAPAN Schematic 1 3 26.7 1.051 30 1.181 4 10.7 .421 2.5 4.75 .098 .187 8.35 .329 37.6 1.480 2-3.2 DIA. 2-.126 DIA. 6 12 .472 1 19 .748 19 .748 5 6 1 37.6 1.480 Schematic 3 12 .472 2.5 4.75 .098 .187 Hole spacing 6 0.5 .020 Accept Faston 187 9 .354 2 2.5 .098 8.35 .329 0.9 .035 5 3.6 .142 2.4 .094 8.35 .329 MADE IN JAPAN 9 .354 3 8.35 .329 0.9 .035 4 2.4 .094 1.4 DIA. .055 N.O. terminal 3 4 Common terminal 2 5 Coil terminal 1 6 Plug-in type 1a 2a 30 1.181 30 1.181 1.4 DIA. .055 2.5 4.75 .098 .187 19 .748 9 .354 3.1 .122 10.7 .421 3 26.7 1.051 30 1.181 2 Schematic 2.5 .098 5 3 4 2 5 26.7 1.051 0.5 .020 Accept Faston 187 8.35 .329 MADE IN JAPAN 19 .748 9 .354 3.1 .122 10.7 .421 2.5 .098 2.4 .094 0.9 .035 8.35 .329 3 8.35 .329 4 2.4 .094 0.9 .035 1.4 DIA. .055 8.35 .329 0.5 .020 Accept Faston 187 Schematic 30 1.181 MADE IN JAPAN 5 1 6 1 12 .472 6 6 1 2.5 4.75 .098 .187 N.O. terminal 3 4 Common terminal 2 5 Coil terminal 12 .472 1 6 General tolerance: ±0.3 ±.012 REFERENCE DATA JC1a type 1. Maximum value for switching capacity 2. Life curve 3.-(1) Coil temperature rise Point measured: Inside the coil Ambient temperature: 26°C 79°F AC resistive load DC resistive load 1 DC inductive load (L/R = 7 ms) 250 V AC resistive load 30 V DC resistive load 100 250 V AC inductive load (cosϕ = 0.4) 10 0.1 30 V DC inductive load (L/R = 7 ms) Temperature rise, °C Contact current, A AC inductive load (cosϕ = 0.4) Life, × 104 80 15 10 70 nt rre 60 5A cu 1 nt rre 0A cu 1 50 nt rre 5A 40 cu nt rre 30 No cu 20 1 10 100 400 Contact voltage, V 0 5 10 15 Contact current, A All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd. 0 80 90 100 110 120 130 140 Coil applied voltage, %V JC 3.-(3) Coil temperature rise Point measured: Inside the coil Ambient temperature: 40°C 104°F Point measured: Inside the coil Ambient temperature: 60°C 140°F 70 60 50 t en urr c 5A 1 A 10 nt e urr c 40 t en urr c 5A 30 20 No 0 80 80 70 60 50 1 cu c 5A nt No 0 80 t en urr 20 nt rre A 10 40 t 90 100 110 120 130 140 t en urr c 5A 30 en rr cu 4. Operate / release time Operate and release time, ms 80 Temperature rise, °C Temperature rise, °C 3.-(2) Coil temperature rise e urr c 90 100 110 120 130 140 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 4 3 2 1 0 Operate time Max. Min. Release time 80 100 Coil applied voltage, %V Coil applied voltage, %V Coil applied voltage, %V Max. Min. 120 JC2a type 1. Maximum value for switching capacity 2. Life curve 3.-(1) Coil temperature rise Point measured: Inside the coil Ambient temperature: 26°C 79°F 1 DC inductive load (L/R = 7 ms) 100 Life, × 104 Contact current, A AC resistive AC load inductive load DC resistive load (cosϕ = 0.4) 250 V AC resistive load 30 V DC resistive load 10 0.1 Temperature rise, °C 80 10 250 V AC inductive load (cosϕ = 0.4) 0 100 250 400 Contact voltage, V 2 4 6 8 10 12A 80 70 60 nt nt rre rre cu No t n rre cu 40 30 cu r 5A 20 0 t ren 3A 80 cu 90 100 110 120 130 140 Coil applied voltage, %V Temperature rise, °C Point measured: Inside the coil Ambient temperature: 60°C 140°F Temperature rise, °C 3.-(3) Coil temperature rise Point measured: Inside the coil Ambient temperature: 40°C 104°F 8A 1 8A nt 0A 8A cu 1 0 rr cu c nt 3 A No t n rre cu rre 5A 80 t en e urr 30 20 nt t en urr c No rre 3A cu 80 cu 90 100 110 120 130 140 4. Operate / release time rre 60 40 cu Coil applied voltage, %V 70 nt rr cu 40 0 80 50 t rre 5A en 50 Contact current, A 3.-(2) Coil temperature rise 50 60 cu 20 90 100 110 120 130 140 Coil applied voltage, %V Operate and release time, ms 10 nt rre 0A 30 30 V DC inductive load (L/R = 7 ms) 0.01 1 nt 70 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 3 2 1 0 Operate time Max. Min. Release time 80 All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd. Max. Min. 100 120 Coil applied voltage, %V JC ACCESSORIES JC1-SS JC2-SS JC1-PS JC2-SS JC2-PS mm inch Tolerance: ±0.5 ±.020 9±0.2 .354±.008 26 1.024 9±0.2 .354±.008 Faston187 0.25 .010 7.6±0.2 .299±.008 0.25 .010 7.6±0.2 .299±.008 35 1.378 16±0.2 .630±.008 36 1.417 16±0.2 .630±.008 JC2-PS 2.0 .079 4.75 .187 7.5 .295 18.7 .736 12±0.2 .472±.008 22 .866 22.3 .878 16.2 .638 12±0.2 .472±.008 5 .197 JC1-PS 4-2.4 DIA. 4-.094 DIA. JC2-PS 9 .354 9 .354 7.6 .299 7.6 .299 6-2.4 DIA. 6-.094 DIA. 32.3 1.272 15.45 .608 15.45 .608 13.1 .516 Panel cutout 13.1 .516 PC board Pattern Tolerance: ±0.1 ±.004 Tolerance: ±0.1 ±.004 (Note) Outward dimensions and chassis cutout dimensions for JC1-SS and JC1-PS are same as those of JC2-SS and JC2-PS respectively. UL/CSA approved type is standard. For Cautions for Use, see Relay Technical Information All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.