JJM1-12V

JJ-M COMPACT SIZE AUTOMOTIVE RELAY JJ-M RELAYS FEATURES TYPICAL APPLICATIONS • Compact size • Perfect for automobile electrical systems Over 2  105 openings possible with a 14 V DC motor load, an inrush current of 25 A, and steady state current of 5 A. (N.O. side) • Standard terminal pitch employed The terminal array used is identical to that used in small automotive relays. • Plastic sealed type. Plastically sealed for automatic cleaning. • Line-up of 1 Form A and 1 Form C • Power windows • Auto door lock • Electrically powered sun roof • Electrically powered mirror • Cornerring lamp, etc. ORDERING INFORMATION JJM Contact arrangement 1: 1 Form C 1a: 1 Form A Coil voltage (DC) 12 V TYPES Contact arrangement Coil voltage Part No. 1 Form A 12 V DC JJM1a-12V 1 Form C 12 V DC JJM1-12V Standard packing; Carton (tube): 50 pcs.; Case: 1,000 pcs. RATING 1. Coil data Nominal coil voltage Pick-up voltage (at 20C 68F) Drop-out voltage (at 20C 68F) Nominal operating current [10%] (at 20C 68F) Coil resistance [10%] (at 20C 68F) Nominal operating power (at 20C 68F) Usable voltage range 12V DC Max. 7.2 V DC (Initial) Min. 1.0 V DC (Initial) 53.3 mA 225 640 mW 10 to 16V DC Note: Other pick-up voltage types are also available. Please contact us for details. ds_61210_en_jjm: 010113J 1 JJ-M 2. Specifications Characteristics Item Specifications Arrangement Contact 1 Form A 1 Form C Contact resistance (Initial) Typ 5m (By voltage drop 6V DC 1A) Contact material Ag alloy (Cadmium free) Nominal switching capacity (resistive load) N.O.: 35 A (at 20C 68F for 2 minutes), 25 A (at 20C 68F for 1 hour), 30 A (at 85C 185F for 2 minutes), 20 A (at 85C 185F for 1 hour) Max. carrying current (12V DC)*3 Rating N.O.: 20 A 14V DC N.C.: 10 A 14V DC 20 A 14V DC Nominal operating power 640 mW Min. switching capacity (resistive load)*1 1 A 12V DC Insulation resistance (Initial) Electrical characteristics Breakdown voltage (Initial) Min. 100 M (at 500V DC, Measurement at same location as “Break down voltage” section) Between open contacts 500 Vrms for 1 min. (Detection current: 10mA) Between contacts and coil 500 Vrms for 1 min. (Detection current: 10mA) Operate time (at nominal voltage) Max. 10ms (at 20C 68F, excluding contact bounce time) (Initial) Release time (at nominal voltage) Shock resistance Mechanical characteristics Vibration resistance Max. 10ms (at 20C 68F, excluding contact bounce time) (Initial) Min. 100 m/s2 {10G} (Half-wave pulse of sine wave: 11ms; detection time: 10s) Functional Destructive Min. 1,000 m/s2 {100G} (Half-wave pulse of sine wave: 6ms) Functional 10 Hz to 100 Hz, Min. 44.1 m/s2 {4.5G} (Detection time: 10s) Destructive 10 Hz to 500 Hz, Min. 44.1 m/s2 {4.5G}, Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours Min. 107 (at 120 cpm) Mechanical Expected life Min. 105 (at nominal switching capacity) (operating frequency: 1s ON, 9s OFF) Min. 2  105 (at Inrush 25A, Steady 5A 14 V DC) Min. 5  104 (at 20A 14 V DC motor lock) (operating frequency: 0.5s ON, 9.5s OFF) Electrical Ambient temperature: –40C to +85C –40F to +185F, Humidity: 5% R.H. to 85% R.H. (Not freezing and condensing at low temperature) Conditions for operation, transport and storage*2 Conditions N.O.: Min. 105 (at nominal switching capacity) N.C.: Min. 105 (at nominal switching capacity) (operating frequency: 1s ON, 9s OFF) N.O.: Min. 2  105 (at Inrush 25A, Steady 5A 14 V DC), Min. 5  104 (at 20A 14 V DC motor lock) N.C.: Min. 2  105 (at 20A 14 V DC brake currect) (operating frequency: 0.5s ON, 9.5s OFF) Max. operating speed 6 cpm (at nominal switching capacity) Mass Approx. 5g .176 oz Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *2. The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. Refer to “6. Usage, Storage and Transport Conditions“ in AMBIENT ENVIRONMENT section in Relay Technical Information. Please inquire if you will be using the relay in a high temperature atmosphere (110C 230F). *3. Depends on connection conditions. Also, this does not guarantee repeated switching. We recommend that you confirm operation under actual conditions. REFERENCE DATA 1. Coil temperature rise Sample: JJM1-12V, 6pcs Point measured: Inside the coil Contact current: Non current through contact, 5A, 10A, 15A, 20A Resistance method, ambient temperature 85C 185F 2. Max. switching capability (Resistive load, initial) (N.O. side: room temperature) 120 40 20A 100 15A 80 10A 5A Non current through contact 60 40 Coil applied voltage, VDC 60 Switching voltage, VDC Temperature rise, °C 3. Ambient temperature and operating voltage range 50 40 30 20 35 30 25 20 15 10 20 10 0 0 12 14 16 Coil applied voltage, V 2 5 0 10 20 30 40 Switching current, A 50 0 −40 −20 Pick-up voltage (cold start) 0 20 40 60 8085 100 120 Ambient temperature, °C ds_61210_en_jjm: 010113J JJ-M 4. Distribution of pick-up and drop-out voltage 5. Distribution of operate time 6. Distribution of release time Sample: JJM1-12V, 100pcs Sample: JJM1-12V, 100pcs Sample: JJM1-12V, 100pcs * Without diode Pick-up voltage Drop-out voltage 50 Quantity, n Quantity, n 60 40 70 70 60 60 50 50 Quantity, n 70 40 40 30 30 30 20 20 20 10 10 10 0 0 1.5 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 2.0 2.5 3.0 3.5 4.0 4.5 0 5.0 0 0.5 1.0 1.5 Time, ms Voltage, V 2.0 2.5 3.0 3.5 Time, ms 7-(1). Electrical life test (at resistive load) Sample: JJM1-12V Quantity: n = 6 (NC = 3, NO = 3) Load: Resisitive load (NC side: 10A 14 V DC, NO side: 20 A 14 V DC); Operating frequency: ON 1s, OFF 9s Ambient temperature: Room temperature Pick-up and drop-out voltage, V 7 Contact welding: 0 time Miscontact: 0 time 6 5 Max. X Min. Pick-up voltage 4 3 Drop-out voltage Max. 2 X Min. 1 0 0 5 10 No. of operations, × 104 Change of pick-up and drop-out voltage Circuit : Tested sample 8 Pick-up and drop-out voltage, V Sample: JJM1-12V, 6pcs. Load: Inrush 25A, Steady 5A, Brake current 18A 14V DC, Power window motor load (Free condition). Operating frequency: ON 0.5s, OFF 9.5s Ambient temperature: Room temperature Change of contact resistance 50 Contact welding: 0 time Miscontact: 0 time 7 Max. X Min. 6 5 Pick-up voltage 4 Drop-out voltage 3 Max. X Min. 2 Contact resistance, mΩ 7-(2). Electrical life test (Motor free) N.C. side N.O. side 40 30 20 Max. X(N.C.) Min. Max. X(N.O.) Min. 10 M 1 0 5 No. of operations, × 104 Circuit : Tested sample Pick-up and drop-out voltage, V Sample: JJM1-12V, 6pcs. Load: 20A, 14VDC, Power window motor actual load (lock condition). Operating frequency: ON 1s, OFF 5s Ambient temperature: Room temperature 7 Contact welding: 0 time Miscontact: 0 time 6 5 10 20 Change of contact resistance 50 Max. X Min. Pick-up voltage 4 Drop-out voltage 3 0 No. of operations, × 104 Change of pick-up and drop-out voltage 7-(3). Electrical life test (Motor lock) 0 10 Max. X Min. 2 Contact resistance, mΩ 0 N.C. side N.O. side 40 30 20 Max. Max. X(N.C.) X(N.O.) Min. 10 M 1 0 ds_61210_en_jjm: 010113J 0 2.5 No. of operations, × 104 5 0 0 2.5 5 No. of operations, × 104 3 JJ-M Change of pick-up and drop-out voltage 7-(4). Electrical life test (Lamp load) Sample: JJM1-12V, 6pcs. Load: 27W+21W, steady min. 4A, Lamp actual load Operating frequency: ON 2s, OFF 13s Ambient temperature: Room temperature Change of contact resistance Circuit : 50 N.C. side N.O. side 9 Contact resistance, mΩ Pick-up and drop-out voltage, V 10 8 Pick-up voltage 7 Max. X Min. 6 5 4 Drop-out voltage 3 Max. X Min. 2 40 30 20 Max. Max. X(N.O.) X(N.C) Min. Min. 10 1 0 0 5 0 10 0 5 10 No. of operations, × 104 No. of operations, × 104 Load current waveform Inrush current: 42A, Steady current: 4.4A 10A 10ms DIMENSIONS (mm inch) CAD Data Data from our Web site. Download CAD External dimensions CAD Data 15.5 .610 Schematic (Bottom view) PC board pattern (Bottom view) 1a 1a 12 .472 13.9 .547 3-1.4 dia. 3-.055 dia. NO COM COIL 0.4 .016 3.5 .138 2.5 .098 A 2-0.3 2-.012 2-0.4 2-.016 1c 10.0 1.2 .394 .047 4-1.4 dia. 4-.055 dia. NO 10.2 .402 4-1.0 4-.039 1.6±0.3 .063±.012 COIL NC 10.0 .394 1.5 dia. .059 dia. 2.5 .098 * Dimensions (thickness and width) of terminal is measured before pre-soldering. Intervals between terminals is measured at A surface level. Dimension: Max. 1mm .039 inch: 1 to 3mm .039 to .118 inch: Min. 3mm .118 inch: 10.2 .402 1c COM 0.3 .012 2.5 .098 10.0 .394 1.5 dia. .059 dia. General tolerance 0.1 .004 0.2 .008 0.3 .012 10.2 .402 Tolerance: 0.1 .004 Note:  Marked terminal is only for 1 Form C type For Cautions for Use, see Relay Technical Information. 4 ds_61210_en_jjm: 010113J