JR1AF-TM-DC6V

SLIM TYPE POWER RELAYS 28.6 1.126 FEATURES 12.8 .504 • AC coil types and high capacity (16 A) types • Wide insulation distance: 8 mm .315 inch between coil and contact • High dielectric withstanding for transient protection: JR can withstand 10,000 V surge in µs between coil and contact. • High inrush current capability: 1 Form A: 111 A inrush (TV-5), • Slim package for tandem mounting: Header area is 28.6 mm × 12.8 mm 1.126×.504 inch • Molded materials: all 94 V-0 • "TM" and "TMP" types available • TÜV also approved 28.5 1.122 High contact capacity type mm inch JR-RELAYS TMP type TM type SPECIFICATIONS Contact Characteristics Arrangement Initial contact resistance max. (By voltage drop 6 V DC 1 A) High capacity AC coil type type 1 Form A 30 mΩ Contact material Rating (resistive) Silver alloy 10 A 250 V AC 16 A 250 V AC Nominal switching capacity 10 A 30 V DC 16 A 30 V DC Maximum switching power 2,500 VA, 300 W 4,000 VA, 480 W Maximum switching voltage 250 V AC, 30 V DC 250 V AC, 30 V DC Maximum switching current 10 A 16 A Mechanical (180 cpm) Expected Electrical 16 A 250 V AC life (min. operations) (resistive) 10 A 250 V AC (20 cpm) 5×106 — 10 10 — 5 5 AC coil type 1.1 VA/0.9 VA (at 50Hz/60Hz) 530mW Remarks * Specifications will vary with foreign standards certification ratings. *1 Detection current: 10mA *2 Wave is standard shock voltage of ±1.2 × 50µs according to JEC-212-1981 *3 With nominal coil voltage and at maximum switching current *4 Half-wave pulse of sine wave: 11ms; detection time: 10µs *5 Half-wave pulse of sine wave: 6ms *6 Detection time: 10µs *7 Refer to 5. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 24). TYPICAL APPLICATIONS • Microwave ovens • Refrigerators • Copiers • Facsimiles • Air conditioners • Stereo equipment • TV sets • Vending machines • Temperature controllers 98 1,000 Vrms for 1 min. 5,000 Vrms for 1 min. Initial surge voltage between coil and contact*2 Operate time (at nominal voltage)(at 20°C) Release time (without diode) (at nominal voltage)(at 20°C) Temperature rise*3 (at nominal voltage) Functional*4 Shock resistance Destructive*5 Coil Nominal operating power High capacity type 20 cpm Min. 1,000 MΩ at 500 V DC Maximum operating speed Initial insulation resistance Initial Between open contacts breakdown Between contacts and coil voltage*1 Vibration resistance Functional*6 Destructive Conditions for operation, Ambient transport and storage*7 temp. (Not freezing and condensHumidity ing at low temperature) Min. 10,000 V Approx. 10 ms Approx. 6 ms Approx. 2 ms Max. 60°C Max. 45°C (10 A, at 20°C) (16 A, at 20°C) Min. 98 m/s2 {10 G} Min. 980 m/s2 {100 G} 88.2 m/s2 {9 G}, 10 to 55 Hz at double amplitude of 1.5 mm 117.6 m/s2 {12 G}, 10 to 55 Hz at double amplitude of 2.0 mm –50°C to +55°C –50°C to +70°C –58°F to +131°F –58°F to +158°F Unit weight 5 to 85% R.H. Approx. 20 g .71 oz ORDERING INFORMATION Ex. JR 1a TM DC12V Contact arrangement Mounting method Coil voltage 1a: 1 Form A 1aF: High contact capacity (1 Form A) TM: Top mounting Nil: PCB terminal TM: Top mounting TMP: Solder and PC teminal AC 115 V DC 5, 6, 12, 24, 48 V Notes: 1. For UL/CSA recognized types, add suffix UL/CSA. Notes: 2. Standard packing: Carton: 100 pcs. Case: 500 pcs. Notes: 3. 18 V DC type are also available. Please consult us for details. JR TYPES High contact capacity types 1. PC board teminals (Double terminal layout) Contact arrangement 1a AC coil type 1a Coil voltage 5 V DC 6 V DC 12 V DC 24 V DC 48 V DC Part No. JR1aF-DC5V JR1aF-DC6V JR1aF-DC12V JR1aF-DC24V JR1aF-DC48V Coil voltage 5 V DC 6 V DC 12 V DC 24 V DC 48 V DC Part No. JR1aF-TMP-DC5V JR1aF-TMP-DC6V JR1aF-TMP-DC12V JR1aF-TMP-DC24V JR1aF-TMP-DC48V Coil voltage 5 V DC 6 V DC 12 V DC 24 V DC 48 V DC Part No. JR1aF-TM-DC5V JR1aF-TM-DC6V JR1aF-TM-DC12V JR1aF-TM-DC24V JR1aF-TM-DC48V 115 V AC JR1a-TM-AC115V (Notes) 1. For UL/CSA recognized types, add suffix UL/CSA. 2. Standard packing Carton: 100 pcs., Case 500 pcs. UL CSA TV rating types available Type JR1a AC coil type JR1aF high capacity type UL TV-5 TV-5 CSA TV-5 TV-5 2. "TMP" type Contact arrangement 1a 3. "TM" type Contact arrangement 1a COIL DATA (at 20°C 68°F) Contact arrangement 1 Form A Nominal voltage Pick-up voltage, (max.) (Initial) Drop-out voltage, (min.) (Initial) Coil resistance, Ω (±10%) 5 V DC 6 V DC 12 V DC 24 V DC 48 V DC 4.0 V DC 4.8 V DC 9.6 V DC 19.2 V DC 38.4 V DC 0.5 V DC 0.6 V DC 1.2 V DC 2.4 V DC 4.8 V DC 47 68 270 1,100 4.350 *115 V AC 92 V AC 34.5 V AC — Maximum allowable voltage, (at 70°C 158°F) 5.5 V DC 6.6 V DC 13.2 V DC 26.4 V DC 52.8 V DC 126.5V AC Nominal operating Nominal current, operating power, mA (±10%) mW 106 88 44 22 11 7.8/9.1 530 530 530 530 530 0.9/1.1 VA (60 Hz)/(50 Hz) (60 Hz)/(50 Hz) (at 20°C 68°F) Note: Coil resistance varies ±10% for less than 1,000 Ω coil and ±15% for more than 1,000 Ω. For each ±1°C change in ambient temperature, coil resistance varies ±0.4%. *AC 100 V coil is available only for JR1a-TM type. DIMENSIONS mm inch • JR1aF (DC) PC board pattern (Copper-side view) Relay outline 6-1.3 DIA. 6-.051 DIA. 28.5 1.122 7.5 12.8 .295 .504 0.8 .031 0.5 .020 0.5 .020 0.8 .031 1.45 .057 20 .787 5 .179 28.6 1.126 12.8 .504 7.5 .295 Tolerance: ±0.1 ±.004 1.45 .057 Schematic (BOTTOM VIEW) 4 4 N.O. N.O. 6 6 COM COM 5 .197 20 .787 8 0.4 .016 1 Top view 28.6 1.126 Dimension : Max. 1mm .039 inch 1 to 3mm .039 to .118 inch Min. 3mm .118 inch General tolerance ±0.1 ±.004 ±0.2 ±.008 ±0.3 ±.012 4 6 1 4 6 8 99 JR • JR1aF-TMP (DC) mm inch 2.15±0.5 .085±.020 5.2±0.5 .205±.020 4.75 .187 PC board pattern (Copper-side view) FASTON # 187 0.5 .020 Relay outline 4-1.3 DIA. 4-.051 DIA. 8.5 .335 7.5 12.8 .295 .504 1.45 .057 28.5 1.122 5 .197 20 .787 28.6 1.126 Tolerance: ±0.1 ±.004 Schematic (BOTTOM VIEW) 0.5 .020 0.8 .031 0.5 .020 0.8 .031 Top view 12.8 .504 7.5 .295 6 1.45 .057 1 8 4 4 4 N.O. N.O. 6 6 COM COM 5 .197 20 .787 8 FASTON # 187 28.6 1.126 4 6 N.O. COM 1 0.4 .016 Dimension : Max. 1mm .039 inch 1 to 3mm .039 to .118 inch Min. 3mm .118 inch General tolerance ±0.1 ±.004 ±0.2 ±.008 ±0.3 ±.012 • JR1aF-TM (DC) / JR1a-TM (AC) Panel cutout 2-M3 or 2-M3.5 2-M.118 or 2-M.138 3.8 .150 44.0 1.732 38.0 1.496 Schematic (BOTTOM VIEW) 2.5 .098 28.3 1.114 N.O. 4 COM 6 8.5 .335 0.5 4.75 .020 .187 2.15±0.5 .085±.020 17.5±0.5 5.2±0.5 .689±.020 .205±.020 28.6 1.126 4.75 .187 3.75 .148 1 8 Coil 0.5 .020 7.5±0.5 .295±.020 12.8 .504 FASTON # 187 8 4 6 N.O. COM 1 Dimension : Max. 1mm .039 inch 1 to 3mm .039 to .118 inch Min. 3mm .118 inch General tolerance ±0.1 ±.004 ±0.2 ±.008 ±0.3 ±.012 * JR1a-TM-AC 100 V is not high contact capacity version but has the same dimensions as JR1aF-TM. 100 JR REFERENCE DATA NOTES 1. Coil temperature rise 2. Operate & release time Sample: JR1aF-TM-DC24V Measurement at coil inside and contact portion Ambient temperature: 22°C to 25°C 72°F to 77°F Sample: JR1aF-TM-DC24V 25 Coil inside 16A 10A 5A 0A 40 30 16A Contact portion 20 10A 5A 10 Operate & release time, ms Temperature rise, °C 50 "TM" and "TMP" types of high contact capacity types: When the contact carrying current exceeds 10 A, the soldering connection at terminals is recommended. 20 15 Operate time 10 Max. xMin. 5 Release time 0 80 90 100 110 120 Coil applied voltage, % 0 80 Max. xMin. 90 100 110 120 Coil applied voltage, % For Cautions for Use, see Relay Technical Information 101