JS1A12F

VDE MINIATURE PC BOARD TYPE POWER RELAY JS JS RELAYS FEATURES 22 .866 • Miniature size with universal terminal footprint • High contact capacity: 10 A • Class B coil insulation type available • TV-5 type available (Standard type) 1 Form A type → TV-5 1 Form C type → TV-5 (N.O. side only) • VDE, TÜV also approved • Sealed construction for automatic cleaning (Standard type) 16 .630 16 .630 mm inch SPECIFICATIONS Contact Characteristics Types Arrangement Initial contact resistance, max. (By voltage drop 6 V DC 1 A) Contact material Nominal switching capacity Rating Max. switching power (resistive Max. switching voltage load) Max. switching current Min. switching capacity#1 Mechanical (at 180 cpm) Electrical at 10 A 125 V AC, 6 A 277 V AC resistive Expected (standard) life (min. 10 A 277 V AC resistive (High power) ope.) 10 A 250 V AC resistive (Standard: at 20 cpm) (High power: at 20 cpm, 105°C 221°F)** Standard type 1 Form A, 1 Form C High power type 1 Form A Max. operating speed 20 cpm Standard High power type type Min. 100 MΩ (at 500 V DC) Types Initial insulation resistance 100 mΩ Silver alloy 10 A 250 V AC 10 A 250 V AC 10 A 125 V AC 10 A 125 V AC 6 A 277 V AC 10 A 277 V AC 2,500 VA 250 V AC, 100 V DC 10 A (AC), 5 A (DC) 100 mA, 5 V DC Initial breakdown voltage*1 Between open contacts Between contacts and coil Operate time*2 (at nominal voltage) Release time(without diode)*2 (at nominal voltage) Temperature rise (at nominal voltage) 107 Shock resistance 105 2×105 Functional*3 Destructive*4 Functional*5 Vibration resistance Destructive 5 × 104 (No contact only) 1.5 × 105 ** Holding voltage should be 60% V of nominal voltage Coil Nominal operating power 360 mW #1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. Remarks *1 Detection current: 10mA *2 Excluding contact bounce time *3 Half-wave pulse of sine wave: 11ms; detection time: 10µs Conditions for operation, transport and storage*6 (Not freezing and condensing at low temperature) Ambient temp.*7 Humidity Unit weight 1,500 Vrms for 1 min. Approx. 10 ms Approx. 10 ms Max. 35°C, resistive, nominal voltage applied to coil. Contact carrying current: 10A, at 85°C 185°F Min. 98 m/s2 {10 G} Min. 980 m/s2 {100 G} Approx. 98 m/s2 {10 G}, 10 to 55 Hz at double amplitude of 1.6 mm Approx. 117.6 m/s2 {12 G}, 10 to 55 Hz at double amplitude of 2 mm –40°C to –40°C to +85°C +105°C –40°F to –40°F to +185°F +221°F 5 to 85% R.H. Approx.12 g .423 oz *4 Half-wave pulse of sine wave: 6ms *5 Detection time: 10µs *6 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT *7 When using relays in a high ambient temperature, consider the pick-up voltage rise due to the high temperature (a rise of approx. 0.4% V for each 1°C 33.8°F with 20°C 68°F as a reference) and use a coil impressed voltage that is within the maximum allowable voltage range. TYPICAL APPLICATIONS 1. Home appliances Air conditioner, heater, etc. 2. Automotive Power-window, car antenna, door-lock, etc. 750 Vrms for 1 min. 3. Office machines PPC, facsimile, etc. 4. Vending machines All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd. JS ORDERING INFORMATION Ex. JS Contact arrangement 1a F Protective construction Nil: Sealed type 1: 1 Form C (Standard) F: Flux-resistant type 1a: 1 Form A (Standard) 1aP: 1 Form A (High Power) B 12V F Coil insulation class Coil voltage (DC) Environmental support Nil: Class E insulation B: Class B insulation 5, 6, 9, 12, 18, 24, 48 V F: RoHS Directive conforming type (AgSnO2 type) Nil: RoHS Directive non-conforming type (AgCdO type) UL/CSA, VDE, TÜV (Standard type only) approved type is standard. Notes: 1. Standard packing: Carton: 100 pcs. Case: 500 pcs. 2. When ordering TV rated (TV-5) types, add suffix -TV. 3. Contact arrangement 1aP type is Flux-resistant type only (class B or class F insulation). Please consult us for coil insulation class F. COIL DATA Nominal Nominal Drop-out Coil Max. Pick-up operating High Power type Nominal operating allowable voltage, resistance, voltage, current, Flux-resistant voltage, V DC (max.) V DC (min.) Ω (±10%) mA (±10%) power, mW voltage (at 20°C (at 20°C V DC (at 20°C (at 85°C (at 20°C type (at 20°C 68°F) 68°F) 68°F) 68°F) 185°F) 1 Form A 68°F) JS1aPF-B-5V (-F) 5 3.5 0.5 69.4 72 JS1aPF-B-6V (-F) 6 4.2 0.6 100 60 130%V JS1aPF-B-9V (-F) 9 6.3 0.9 225 40 of 360 JS1aPF-B-12V (-F) 12 8.4 1.2 400 30 nominal JS1aPF-B-18V (-F) 18 12.6 1.8 900 20 voltage JS1aPF-B-24V (-F) 24 16.8 2.4 1,600 15 JS1aPF-B-48V (-F) 48 33.6 4.8 6,400 7.5 Part No. Standard type Sealed type 1 Form A 1 Form C Flux-resistant type 1 Form A 1 Form C JS1a-5V (-F) JS1-5V (-F) JS1aF-5V (-F) JS1F-5V (-F) JS1a-6V (-F) JS1-6V (-F) JS1aF-6V (-F) JS1F-6V (-F) JS1a-9V (-F) JS1-9V (-F) JS1aF-9V (-F) JS1F-9V (-F) JS1a-12V (-F) JS1-12V (-F) JS1aF-12V (-F) JS1F-12V (-F) JS1a-18V (-F) JS1-18V (-F) JS1aF-18V (-F) JS1F-18V (-F) JS1a-24V (-F) JS1-24V (-F) JS1aF-24V (-F) JS1F-24V (-F) JS1a-48V (-F) JS1-48V (-F) JS1aF-48V (-F) JS1F-48V (-F) DIMENSIONS mm inch Schematic (Bottom view) 1a N.O. 16 .630 0.4 .016 3.9 .154 0.24 .009 COIL 1c N.O. 0.8 .031 0.8 .031 COIL 0.4 .016 2 16 .630 1.2 .047 2.3 .091 COM 3 N.O. 12 .472 1 4 N.C. 5 N.C. PC board pattern (Bottom view) 1a (Standard, High Power) 4-1.3 dia. 4-.051 dia. 0.4 .016 2 .079 COM 12.2 .480 22 .866 12 .472 Note: Terminal No. 4 is only for Standard 1 Form C type General tolerance: ±0.3 ±.012 2 .079 12.2 .480 1c (Standard) 5-1.3 dia. 5-.051 dia. 12 .472 2 .079 12.2 .480 Tolerance: ±0.1 ±.004 All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd. JS REFERENCE DATA 1. Maximum value for switching capacity 2. Operate/release time 3. Life curve Sample: 25 pcs., JS1-12V Ambient temperature: Room temperature 100 10 1 DC resistive load 10 Operate time 125V AC resistive load 8 Life, ×104 AC resistive load Operate/release time, ms Contact current, A 100 6 4 Max. – x Min. Max. – x Min. Release time 2 10 30 0 100 80 100 Contact voltage, V 10 120 1 140 0 1 2 3 4 5 6 7 8 9 4-(1). Coil temperature rise 4-(2). Coil temperature rise 5. Ambient temperature characteristics Sample: 5 pcs., JS1a-24V Measured portion: Inside the coil Contact current: 5 A Sample: 5 pcs., JS1a-24V Measured portion: Inside the coil Contact current: 10 A Sample: 6 pcs., JS1-12V Changing ration, % 60 60 26°C 70°C 85°C 40 30 Temperature rise, °C 50 70°C 85°C 40 10 30 20 –10 10 10 –20 100 120 140 0 160 100 120 140 Ambient temperature °C 160 Coil applied voltage, %V Coil applied voltage, %V 6. Electrical life test (10 A 125 V AC, resistive load) Change of pick-up and drop-out voltage Change of contact resistance 100 (Circuit) Contact welding detection and Mis-contacting detection circuit Pick-up/drop-out voltage, V 10 Sample: 6 pcs., JS1-12V Operating speed: 20 cpm Ambient temperature: room temperature 10A 125V AC Drop-out voltage 20 40 60 80 20 0 Pick-up voltage 20 –60 –40 –20 0 8 Pick-up voltage Contact resistance, mΩ Temperature rise, °C 26°C 50 Max. – x Min. 6 4 Contact on the N.C. side Contact on the N.O. side 80 60 40 Drop-out voltage Max. – x Min. 2 0 10 Contact current, A Coil applied voltage, %V 5 0 10 No. of operations, ×10 Max. Max. – x– x Min. Min. 20 4 For Cautions for Use, see Relay Technical Information All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd. 5 10 No. of operations, ×104