JVN1A-12V

JV-N COMPACT FLAT POWER RELAY FOR HEATER LOADS JV-N RELAYS FEATURES 22 .866 16 .630 10.9 .429 Compliance with RoHS Directive • High 16 A capacity The contacts are high capacity 16A, 125 V AC. • Compact, flat type with low 10.9 mm .429 inch height Compact flat type with low surface area of 16 × 22 mm .630 × .866 inch and height of 10.9 mm .429 inch. • High sensitivity at 200 mW High sensitivity at 200 mW coil power consumption. • Represses contact terminal heat The contact terminals are larger and thicker compared to the existing JV relay. This limits the rise in temperature of the terminals when there is a large current flowing to approx. 28°C 62°F (normal current of 16 A). • Conforms to the various safety standards UL/CSA, TÜV approved. About Cd-free contacts We have introduced Cadmium free type products to reduce Environmental Hazardous Substances. (The suffix “F” should be added to the part number) Please replace parts containing Cadmium with Cadmium-free products and evaluate them with your actual application before use because the life of a relay depends on the contact material and load. SPECIFICATIONS Contact Characteristics Arrangement 1 Form A Initial contact resistance, max. Max. 100 mΩ (By voltage drop 6 V DC 1 A) Contact material AgSnO2 type Nominal switching 16 A 125 V AC, 10 A 277 V AC capacity 10 A 30 V DC, 10 A 125 V AC Max. switching power 2,770 VA, 300 W Rating (resistive Max. switching voltage 277 V AC, 30 V DC load) Max. switching current 16 A (AC 125 V), 10 A (DC) Min. switching capacity#1 100 mA, 5 V DC (Reference value) Expected life (min. ope.) 2×107 Mechanical (at 180 cpm) 3×104 Sealed 16 A 125 V AC Electrical at resistive type 10 A 30 V DC 105 load Flux-resistant type 105 (at 20 cpm) 10 A 125 V AC Max. operating speed Operate time*1 (at nominal voltage) Release time*2 (at nominal voltage) Initial insulation resistance Initial breakdown Between open contacts voltage (Detection Between contacts current: 10 mA and coil Surge voltage between contact and coil Temperature rise Conditions in case of operation, transport and storage*8 Coil Nominal operating power 200 mW (DC 4.5 to 48 V) 600 mW (DC 100 V) #1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. Remarks * Specifications will vary with foreign standards certification ratings. *1 Excluding contact bounce time *2 Excluding contact bounce time, without diode *3 By resistive method; nominal voltage applied to the coil; contact carrying current: 16A, at 70°C 158°F *4 Nominal voltage applied to the coil, at 60°C 140°F 5 * Half-wave pulse of sine wave: 11 ms; detection time: 10 µs *6 Half-wave pulse of sine wave: 6 ms *7 Detection time: 10 µs *8 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT. Shock resistance Vibration resistance Functional Destructive Functional Destructive Unit weight All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd. 20 cpm Max. 12 ms (DC 4.5 V to 48 V) Max. 8 ms (DC 100 V) Max. 5 ms Min. 1,000 MΩ (at 500 V DC) 1,000 Vrms for 1 min. 2,500 Vrms for 1 min. 4,500 V Max. 45°C (DC 4.5 V to 48 V) *3 Max. 55°C (DC 100 V)*4 Ambient temperature –40 to 70°C –40 to 158°F (DC 4.5 to 48 V) –40 to 60°C –40 to 140°F (DC 100V) Humidity: 5 to 85 % R.H. (Note freezing and condensing at low temperature) Air pressure: 86 to 106 kPa 200 m/s2{20G}*5 1,000 m/s2{100G}*6 10 to 55 Hz *7 at double amplitude of 1.6 mm 10 to 55 Hz at double amplitude of 2 mm Approx. 8g .28 oz JV-N TYPICAL APPLICATIONS ORDERING INFORMATIONS • AV equipment: TV’s, VTR’s, etc. • OA equipment • HA equipment 1a Ex. JVN F – 4.5 V – F Contact arrangement Protective construction Coil voltage (DC) Contact material 1a: 1 Form A Nil: Sealed type F: Flux-resistant type 4.5, 6, 9, 12,18, 24, 48, 100 V F: AgSnO2 type UL/CSA, TÜV approved type is standard. Please inquire about the previous products (Cadmium containing parts). TYPES AND COIL DATA (at 20°C 68°F) Part No. Sealed type JVN1a-4.5V-F JVN1a-6V-F JVN1a-9V-F JVN1a-12V-F JVN1a-18V-F JVN1a-24V-F JVN1a-48V-F JVN1a-100V-F Flux-resistant type Nominal voltage, V DC Pick-up voltage V DC (max.) Drop-out voltage V DC (min.) Coil resistance, W (±10%) JVN1aF-4.5V-F JVN1aF-6V-F JVN1aF-9V-F JVN1aF-12V-F JVN1aF-18V-F JVN1aF-24V-F JVN1aF-48V-F JVN1aF-100V-F 4.5 6 9 12 18 24 48 100 3.375 4.5 6.75 9 13.5 18 36 60 0.23 0.3 0.45 0.6 0.9 1.2 2.4 4 101 180 405 720 1,620 2,880 11,520 16,600 Nominal operating current, mA (±10%) 44.4 33.3 22.2 16.7 11.1 8.3 4.2 6 Nominal operating power, mW 200 200 200 200 200 200 200 600 Max. allowable voltage, V DC 6.75 9 13.5 18 27 36 72 110 DIMENSIONS mm inch 22 .866 16 .630 PC board pattern 4 .157 12.7 .500 1.0 .039 0.5 .020 1.6 .063 2-0.9 dia. 2-.035 dia. 17.78 .700 0.4 10.5 .016 .413 COM 17.78 .700 NO (R) (R) 2.0 .079 12.7 .500 10.16 .400 Dimension: General tolerance Max. 1mm .039 inch: ±0.2 ±.008 1 to 5mm .039 to .197 inch: ±0.3 ±.012 Min. 5mm .197 inch: ±0.4 ±.016 10.16 .400 2.0 .079 REFERENCE DATA 1. Max. switching power Sample: JVN1aF-12 V-F, 6 pcs. point measured: coil inside Contact current: 16 A AC resistive load 1 9 8 7 operate time 6 5 Max. – x Min. 4 3 release time 2 1 10 100 Contact voltage, V 1,000 0 80 100 120 140 Max. – x Min. 160 Temperature rise, °C operate & release time, ms Contact current, A 3. Coil temperature rise Sample: JVN1aF-12 V-F, 6 pcs. 10 100 16 10 2. Operate/release time 50 40 Ambient temperature 30°C 30 Ambient temperature 70°C 20 10 0 80 Coil applied voltage, %V All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd. 100 120 140 160 Coil applied voltage, %V JV-N 4. Ambient temperature characteristics Sample: JVN1aF-12 V-F, 6 pcs. Variation ratio, % 20 –40 –20 0 Drop-out voltage 10 Pick-up voltage 20 40 60 80 Ambient temperature, °C –10 –20 For Cautions for Use, see Relay Technical Information. All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.