JV-N
COMPACT FLAT
POWER RELAY FOR
HEATER LOADS
22
.866
JV-N RELAYS
FEATURES
16
.630
10.9
.429
• High 16 A capacity
The contacts are high capacity 16A,
125 V AC.
• Compact, flat type with low 10.9 mm
.429 inch height
Compact flat type with low surface area
of 16 22 mm .630 .866 inch and
height of 10.9 mm .429 inch.
• High sensitivity at 200 mW
High sensitivity at 200 mW coil power
consumption.
• Represses contact terminal heat
The contact terminals are larger and
thicker compared to the existing JV relay.
This limits the rise in temperature of the
terminals when there is a large current
flowing to approx. 28C 62°F (normal
current of 16 A).
• Conforms to the various safety
standards
UL/CSA, TÜV approved.
COMMENTS ABOUT
Cd FREE
We have introduced Cadmium free type
products to reduce the material which is
not good for our environment. (The suffix
“F” should be added to the part number.)
If you are still using Cadmium containing
parts, which don’t have “F” on the suffix
of the part number, please use Cadmium
free parts from now on. The life of the
Cadmium free parts may be shorter than
the Cadmium containing parts based on
the load condition, so please evaluate the
Cadmium free parts with your actual
application before use.
SPECIFICATIONS
Contact
Characteristics
Arrangement
Initial contact resistance, max.
(By voltage drop 6 V DC 1 A)
Contact material
Nominal switching
capacity
Rating
(resistive
load)
Max. switching power
Max. switching voltage
Max. switching current
Min. switching capacity#1
Expected life (min. ope.)
Mechanical (at 180 cpm)
Sealed type
Electrical
16 A 125 V AC,
at resistive 10 A 30 V DC
load
(at 20 cpm) Flux-resistant type
10 A 125 V AC
1 Form A
Max. 100 m
AgSnO2 type
16 A 125 V AC, 10 A 277 V
AC 10 A 30 V DC, 10 A 125 V
AC
2,770 VA, 300 W
277 V AC, 30 V DC
16 A (AC 125 V), 10 A (DC)
100 mA, 5 V DC
2107
Max. operating speed
Operate time* (at nominal voltage)
1
Release time*2 (at nominal voltage)
Initial insulation resistance
Initial breakdown Between open
contacts
voltage
(Detection
Between contacts
current: 10 mA
and coil
Surge voltage between contact and
coil
Temperature rise
105
3105
Conditions in case of operation,
transport and storage*8
Coil
Nominal operating power
200 mW (DC 4.5 to 48 V)
600 mW (DC 100 V)
#1 This value can change due to the switching frequency, environmental conditions,
and desired reliability level, therefore it is recommended to check this with the
actual load.
Remarks
* Specifications will vary with foreign standards certification ratings.
*1 Excluding contact bounce time
*2 Excluding contact bounce time, without diode
*3 By resistive method; nominal voltage applied to the coil; contact carrying current:
16A, at 70C 158F
*4 Nominal voltage applied to the coil, at 60C 140F
*5 Half-wave pulse of sine wave: 11 ms; detection time: 10 s
*6 Half-wave pulse of sine wave: 6 ms
*7 Detection time: 10 s
*8 Refer to “6. Usage, Storage and Transport Conditions“ in AMBIENT
ENVIRONMENT section in Relay Technical Information.
ds_61B07_en_jvn: 010611J
Shock resistance
Vibration
resistance
Unit weight
Functional
Destructive
Functional
Destructive
20 cpm
Max. 12 ms (DC 4.5 V to 48 V)
Max. 8 ms (DC 100 V)
Max. 5 ms
Min. 1,000 M (at 500 V DC)
1,000 Vrms for 1 min.
2,500 Vrms for 1 min.
Min. 4,500 V
Max. 45C (DC 4.5 V to 48 V)
*3 Max. 55C (DC 100 V)*4
Ambient temperature
–40 to 70C –40 to 158F
(DC 4.5 to 48 V)
–40 to 60C –40 to 140F
(DC 100V)
Humidity: 5 to 85 % R.H.
(Note freezing and condensing
at low temperature)
Air pressure: 86 to 106 kPa
Min. 200 m/s2{20G}*5
Min. 1,000 m/s2{100G}*6
10 to 55 Hz *7
at double amplitude of 1.6 mm
10 to 55 Hz at double
amplitude of 2 mm
Approx. 8g .28 oz
1
JV-N
TYPICAL APPLICATIONS
ORDERING INFORMATIONS
• AV equipment: TV’s, VTR’s, etc.
• OA equipment
• HA equipment
1a
Ex. JVN
F
4.5 V
F
Contact arrangement
Protective construction
Coil voltage (DC)
Contact material
1a: 1 Form A
Nil: Sealed type
F: Flux-resistant type
4.5, 6, 9, 12,18,
24, 48, 100 V
F: AgSnO2 type
UL/CSA, TÜV approved type is standard.
Please inquire about the previous products (Cadmium containing parts).
TYPES AND COIL DATA (at 20C 68F)
Part No.
Sealed type
JVN1a-4.5V-F
JVN1a-6V-F
JVN1a-9V-F
JVN1a-12V-F
JVN1a-18V-F
JVN1a-24V-F
JVN1a-48V-F
JVN1a-100V-F
Flux-resistant
type
Nominal
voltage,
V DC
Pick-up
voltage
V DC (max.)
Drop-out
voltage
V DC (min.)
Coil
resistance,
W (10%)
JVN1aF-4.5V-F
JVN1aF-6V-F
JVN1aF-9V-F
JVN1aF-12V-F
JVN1aF-18V-F
JVN1aF-24V-F
JVN1aF-48V-F
JVN1aF-100V-F
4.5
6
9
12
18
24
48
100
3.375
4.5
6.75
9
13.5
18
36
60
0.23
0.3
0.45
0.6
0.9
1.2
2.4
4
101
180
405
720
1,620
2,880
11,520
16,600
DIMENSIONS(mm inch)
Nominal
operating
current,
mA (10%)
44.4
33.3
22.2
16.7
11.1
8.3
4.2
6
Nominal
operating
power,
mW
200
200
200
200
200
200
200
600
Max.
allowable
voltage,
V DC
6.75
9
13.5
18
27
36
72
110
CAD Data
Data from our Web site.
Download CAD
CAD Data
22
.866
16
.630
PC board pattern
4
.157
12.7
.500
1.0
.039
0.5
.020
1.6
.063
2-0.9 dia.
2-.035 dia.
17.78
.700
0.4 10.5
.016 .413
COM
17.78
.700
NO
(R)
(R)
2.0
.079
12.7
.500
10.16
.400
Dimension:
General tolerance
Max. 1mm .039 inch:
0.2 .008
1 to 5mm .039 to .197 inch: 0.3 .012
Min. 5mm .197 inch:
0.4 .016
10.16
.400
2.0
.079
REFERENCE DATA
1. Max. switching power
Sample: JVN1aF-12 V-F, 6 pcs.
point measured: coil inside
Contact current: 16 A
AC resistive load
1
9
8
7
operate time
6
5
Max.
—
x
Min.
4
3
release time
2
1
10
100
Contact voltage, V
2
1,000
0
80
100
120
140
Max.
—
x
Min.
160
Coil applied voltage, %V
Temperature rise, °C
operate & release time, ms
Contact current, A
3. Coil temperature rise
Sample: JVN1aF-12 V-F, 6 pcs.
10
100
16
10
2. Operate/release time
50
40
Ambient temperature 30°C
30
Ambient temperature 70°C
20
10
0
80
100
120
140
160
Coil applied voltage, %V
ds_61B07_en_jvn: 010611J
JV-N
4. Ambient temperature characteristics
5. Life curve
Sample: JVN1aF-12 V-F, 6 pcs.
Operation frequency: 20 times/min.
Ambient temperature: room temperature
-40
-20
0
100
Drop-out
voltage
10
Pick-up
voltage
20 40 60 80
Ambient
temperature, °C
125V AC resistive load
Life, ×104
Variation
ratio, %
20
10
277V AC
resistive load
-10
-20
1
4
6
8
10
12
14
16
18
Contact current, A
SAFETY STANDARDS
File No.
E43028
UL/C-UL (Recognized)
Contact rating
16A 125V AC, 16A 277V AC, 10A 30V DC
0.3A 110V DC, 1/10HP 125V AC, 1/10HP 277V AC
File No.
LR26550
CSA (Certified)
Contact rating
16A 125V AC, 16A 277V AC, 10A 30V DC
0.3A 110V DC, 1/10HP 125V AC, 1/10HP 277V AC
TÜV (Certified)
File No.
Rating
B 08 07
16A 250V AC (cos=0.4)
13461 250 10A 30V DC (0ms)
For Cautions for Use, see Relay Technical Information.
ds_61B07_en_jvn: 010611J
3