JVN1A-6V-F

JV-N Ideal for heater control 1a 16A, 10.9 mm height flat power relays RoHS compliant JV-N RELAYS FEATURES TYPICAL APPLICATIONS • High 16 A capacity The contacts are high capacity 16A, 125 V AC. • Compact, flat type with low 10.9 mm .429 inch height Compact flat type with low surface area of 16 × 22 mm .630 × .866 inch and height of 10.9 mm .429 inch. • High sensitivity at 200 mW High sensitivity at 200 mW coil power consumption. • Represses contact terminal heat The contact terminals are large and thick. This limits the rise in temperature of the terminals when there is a large current flowing to approx. 28°C 62°F (normal current of 16 A). • Conforms to the various safety standards UL, CSA, TÜV approved. • AV equipment: TV’s, VTR’s, etc. • OA equipment • HA equipment ORDERING INFORMATION JVN 1a F Contact arrangement 1a: 1 Form A Protective construction Nil: Sealed type F: Flux-resistant type Nominal coil voltage (DC) 4.5V, 6V, 9V, 12V, 18V, 24V, 48V, 100V Contact material F: AgSnO2 type Note: Certified by UL, CSA and TÜV TYPES Nominal coil voltage 4.5V DC 6V DC 9V DC 12V DC 18V DC 24V DC 48V DC 100V DC Flux-resistant type Part No. JVN1aF-4.5V-F JVN1aF-6V-F JVN1aF-9V-F JVN1aF-12V-F JVN1aF-18V-F JVN1aF-24V-F JVN1aF-48V-F JVN1aF-100V-F Sealed type Part No. JVN1a-4.5V-F JVN1a-6V-F JVN1a-9V-F JVN1a-12V-F JVN1a-18V-F JVN1a-24V-F JVN1a-48V-F JVN1a-100V-F Note: Standard packing; Carton: 100 pcs., Case: 500 pcs. 5V type is also available. Please consult us. ASCTB189E 201202-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ JV-N RATING 1. Coil data Nominal coil voltage Pick-up voltage (at 20°C 68°F) Drop-out voltage (at 20°C 68°F) Nominal operating current [±10%] (at 20°C 68°F) Coil resistance [±10%] (at 20°C 68°F) 4.5V DC 44.4mA 101Ω 6V DC 9V DC 12V DC 18V DC 24V DC 48V DC 100V DC 33.3mA 22.2mA 16.7mA 11.1mA 8.3mA 4.2mA 6 mA 180Ω 405Ω 720Ω 1,620Ω 2,880Ω 11,520Ω 16,600Ω 75%V or less of nominal voltage 5%V or more of nominal voltage Min. 60 VDC Min. 4 VDC Nominal operating power Max. applied voltage (at 20°C 68°F) 200mW 150%V of nominal voltage 600mW 110%V 2. Specifications Characteristics Contact Rating Item Contact material Arrangement Contact resistance (Initial) Nominal switching capacity (resistive load) Max. switching power (resistive load) Max. switching voltage Max. switching current Nominal operating power Min. switching capacity (reference value)*1 Insulation resistance (Initial) Breakdown voltage (Initial) Electrical characteristics Between open contacts Between contact and coil Temperature rise (coil) Surge breakdown voltage*2 (Between contact and coil) (Initial) Operate time (at nominal voltage) (at 20°C 68°F) Release time (at nominal voltage) (at 20°C 68°F) Functional Destructive Functional Vibration resistance Destructive Mechanical (at 180 times/min.) Shock resistance Mechanical characteristics Expected life Conditions Electrical (at 20 times/min.) Conditions for operation, transport and storage*3 Max. operating speed Unit weight Specifications AgSnO2 type 1 Form A Max. 100 mΩ (By voltage drop 6 V DC 1A) 16A 125V AC, 10A 277V AC, 10A 30V DC, 10A 125V AC (Only for Flux-resistance type) 2,770VA, 300W 277V AC, 30V DC 16A (125V AC), 10A (DC) 200mW (4.5 to 48V DC), 600mW (100V DC) 100mA, 5V DC Min. 1,000MΩ (at 500V DC) Measurement at same location as “Breakdown voltage” section. 1,000 Vrms for 1 min. (Detection current: 10 mA) 2,500 Vrms for 1 min. (Detection current: 10 mA) Max. 45°C 113°F (4.5 to 48V DC), Max. 55°C 131°F (100V DC) [By resistive method, nominal coil voltage applied to the coil; contact carrying current: 16A, at 70°C 158°F (4.5 to 48V DC), at 60°C 140°F (100V DC)] 4,500 V Max. 12 ms (4.5 to 48V DC), Max. 8 ms (100V DC) (excluding contact bounce time.) Max. 5 ms (excluding contact bounce time) (Without diode) 200 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10µs.) 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.) 10 to 55 Hz at double amplitude of 1.6 mm (Detection time: 10µs.) 10 to 55 Hz at double amplitude of 2.0 mm Min. 2×107 Min. 3×104 (sealed type, 16A 125V AC), Min. 5×104 (sealed type, 10A 277V AC), Min. 105 (sealed type, 10A 30V DC), Min. 105 (Flux-resistant type, 10A 125V AC) Ambient temperature: –40°C to +70°C –40°F to +158°F (4.5 to 48V DC), –40°C to +60°C –40°F to +140°F (100V DC), Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature), Air pressure: 86 to 106kPa 20 times/min. (at nominal switching capacity) Approx. 8 g .28 oz * Specifications will vary with foreign standards certification ratings. Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *2. Wave is standard shock voltage of ±1.2×50µs according to JEC-212-1981 *3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage conditions in NOTES. Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ ASCTB189E 201202-T JV-N REFERENCE DATA 1. Max. switching power 2. Coil temperature rise 3. Operate/release time Sample: JVN1aF-12 V-F, 6 pcs. point measured: coil inside Contact current: 16 A Sample: JVN1aF-12 V-F, 6 pcs. 10 AC resistive load 16 10 1 operate & release time, ms Temperature rise, °C Contact current, A 100 50 40 Ambient temperature 30°C 30 Ambient temperature 70°C 20 9 8 7 operate time 6 5 Max. – x Min. 4 3 release time 2 10 1 10 100 0 1,000 80 Contact voltage, V 0 100 120 140 160 Coil applied voltage, %V 80 100 120 140 Max. – x Min. 160 Coil applied voltage, %V 4. Ambient temperature characteristics Sample: JVN1aF-12 V-F, 6 pcs. Variation ratio, % 20 –40 –20 0 Drop-out voltage 10 Pick-up voltage 20 40 60 80 Ambient temperature, °C –10 –20 DIMENSIONS (mm inch) The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/ PC board pattern External dimensions CAD Data 22 .866 16 .630 0.4 10.5 .016 .413 4 .157 12.7 .500 1.0 .039 COM 0.5 .020 1.6 .063 NO (R) 17.78 .700 2.0 .079 12.7 .500 Dimension: Less than 1mm .039inch: Min. 1mm .039inch less than 5mm .197 inch: Min. 5mm .197 inch: 10.16 .400 2-0.9 dia. 2-.035 dia. 17.78 .700 (R) 10.16 .400 2.0 .079 General tolerance ±0.2 ±.008 ±0.3 ±.012 ±0.4 ±.016 SAFETY STANDARDS File No. E43028 UL/C-UL (Recognized) Contact rating 16A 125V AC, 16A 277V AC, 10A 30V DC 0.3A 110V DC, 1/10HP 125V AC, 1/10HP 277V AC File No. LR26550 CSA (Certified) Contact rating 16A 125V AC, 16A 277V AC, 10A 30V DC 0.3A 110V DC, 1/10HP 125V AC, 1/10HP 277V AC TÜV (Certified) File No. Rating B 11 05 16A 250V AC (cosφ =0.4) 13461 304 10A 30V DC (0ms) For Cautions for Use. ASCTB189E 201202-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/