JVN1AF-4.5V-F

Mechanical Relays Power Relays ( Over 2 A ) / High-capacity DC cut off Relays / Signal Relays ( 2 A or less ) / Microwave Devices / Safety Relays SELECTION GUIDE 2023.4 INDEX ◆ Power relays ( Over 2A ) line up  �������������������� 2 ◆ DC load switching capacity ( reference value )  ������������� 3 ◆ Signal relays ( 2A or less ) line up  ������������������� 4 ◆ Microwave devices line up ����������������������� 6 ◆ Safety relays line up �������������������������� 8 ◆ Power relays ( Over 2A ) selector chart ���������������� 10 ◆ High­capacityDC cut off relays selector chart  ������������ 20 ◆ Signal relays ( 2A or less ) selector chart  ��������������� 21 ◆ Microwave devices selector chart  ������������������ 25 ◆ Safety relays selector chart  ��������������������� 27 ◆ Characteristics ���������������������������� 29 Panasonic Industry Co., Ltd. Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー1ー Panasonic Industry Co., Ltd. 2023 ASCTB445E 202304 Power relays line up Non polarized type power relays 120 A HE­N 100 A 90 A HE PV Contact rating ( Form A Contact ) 50 A 30 A 25 A 20 A HE PV HE LF­G HE­S HE PV LF­G HE­S HE HE­R HE­R LF 16 A LZ JV­N LZ LZ­N LZ­N 15 A 10 A LQ JW LQ JW 8A 6A 5A PF PF LD­P JW PA­N JW JW JW 4A 3A 1 Form A 1 Form C 2 Form A Contact arrangement 2 Form C 2 Form A 4 Form A 4 Form A 1 Form B 1 Form B ( 2a1b ) ( 4a1b ) Polarized type power relays ( with latching ) 100 A DZ­S 60 A DJ­H 30 A 16 A DJ DW DJ DJ Contact rating 15 A 10 A 8A SP DE DSP DK DJ DY DW DK 5A DJ DJ ST DJ DE NC DSP DK SP DY ST DSP 4A S 3A S NC S S S S 1A 1 Form A 1 Form B 1 Form C 2 Form A 2 Form B 2 Form C 1 Form A 1 Form B (1a1b) 4 Form A Contact arrangement 4 Form C 2 Form A 2 Form B ( 2a2b ) Panasonic Industry Co., Ltd. Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー2ー Panasonic Industry Co., Ltd. 2023 3 Form A 1 Form B ( 3a1b ) ASCTB422E 202304 DC load switching capacity (reference value) AC load relays shown below can switch DC load as following chart Appearance Product name Contact LF-G (33A) 1 Form A HE PV (48A) 1 Form A HE PV (90A) Load voltage Electrical expected life(resistive load) Current 30 V DC 33 A 75 V DC 35 A Remarks － － 1 Form A 110 V DC 10 A 60 V DC 80 A － 104 HE-N (120A) HE-S (35A) 1 Form A 2 Form A 60 V DC 120 A － 75 V DC 35 A 1 Form A contact only 110 V DC 10 A 1 Form A contact only 220 V DC 10 A Each 1 Form A contact connected in series This chart is guideline for using DC load. Please test actual condition before use. Maximum DC load switching capacity ■ Conditions: resistive load, electrical expected life of 104 cycles (reference value) LF-G (33Ａ) HE PV (48Ａ) HE-S (1 Form A contact only) HE-S *1 HE PV (90Ａ) HE-N (120Ａ) 120 HE-N (120Ａ) 80 HE PV (90Ａ) Current (A) 60 35 33 HE PV (48Ａ) LF-G (33Ａ) HE-S 30 (1 Form A) 20 10 HE PV (48Ａ) 0 HE-S 0 30 60 75 HE-S *1 (1 Form A) 110 Load voltage (V DC) 220 *1: Each 1 Form A contact connected in series Panasonic Industry Co., Ltd. Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー3ー Panasonic Industry Co., Ltd. 2022 ASCTB423E 202211 Signal relays line up Wide variety of signal relays leading on the global market with high Communication Network Equipment GN • Botton surface area 5.7 × 10.6 mm2 • Coｍpact slim body • High sensitivity 100 mW type GQ ( TH ) GQ • Low profile : 5.2 mm • Coｍpact flat body • High sensitivity 100 mW type • Small size controlled 3.5 A inrush current possible TX • High contact capacity • High dielectric strength OA Equipment / Thermostat Panasonic Industry Co., Ltd. Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー4ー Panasonic Industry Co., Ltd. 2022 ASCTB319E 202211 Signal relays line up performance and quality Signal Relays Security TX ( TH ) TX-S • Controlled • High sensitivity 7.5 A inrush 50 mW type current possible TX-D • Surge Withstand voltage 6,000 V TQ ( SMD ) TQ • Low profile : 5 mm • Low profile : 5.6 mm DS • High switching capacity : 2 A Precision / Industrial Equipment Panasonic Industry Co., Ltd. Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー5ー Panasonic Industry Co., Ltd. 2022 ASCTB319E 202211 Our Our Superior Superior Microwave Microwave Devices Devices Product Product Lineup Lineup Terminal type for PC board MICROWAVE DEVICES HIGH FREQUENCY RELAYS RA Relay RS Relay RN Relay RJ Relay RS Relay Coaxial connector contact terminal COAXIAL SWITCHES RD Coaxial Switch Frequency 13GHz (SP6T) (Up to 26.5GHz, SPDT/Transfer) High capacity load (120W) SPDT Transfer ■ Application High RN (1 Form C) Contact carrying power Communication·Broadcasting (75Ω ) High power 2GHz/150W RD Coaxial Switch 26.5GHz/120W (3GHz) Mobile Communication (Base Station) (50Ω) Low High Frequency Band Small size RS (1 Form C) Measurement (50Ω) 3GHz/10W Min. 106 ope. (50Ω) RA (2 Form C) 1GHz/3W Min. 10×106 ope. Panasonic Industry Co., Ltd. Electromechanical Control Business Division industrial.panasonic.com/ac/e/ Low ー6ー RJ (2 Form C) 5GHz/1W Min. 106 ope. RD Coaxial Switch 26.5GHz/120W (3GHz) Min. 5×106 ope. Panasonic Industry Co., Ltd. 2022 ASCTB341E 202211 Support Support for for Wide Wide Range Range of of Frequencies Frequencies ■ Product lineup Features RA RJ RS RN Impedance Contact (Ω) arrangement 10 million operations For measurement equipment 50 2 Form C 8GHz*1 capable Surface mount terminal available 50 2 Form C Small size microwave relay Silent type available 8GHz capable*2 150W carrying power available (at 2GHz) 50/75 50 RD Frequency range (GHz) 1 2 3 8 13 18 26.5 ※1 1 Form C 1 Form C reversed 1 Form C ※2 1 Form C reversed SPDT Long life and high sensitivity coaxial switch 50 Transfer SP6T *1: Ratings are 5GHz *2: Ratings are 6GHz Panasonic Industry Co., Ltd. Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー7ー Panasonic Industry Co., Ltd. 2022 ASCTB341E 202211 Lineup of Safety relays and Accessories ■ Rich lineup Panasonic safety relays Flat type SF-D SF-Y SF SF-Y SF-M Slim type SF-S 2 poles SF-S 4 poles 1a1b 2a2b 3a1b Contact Configuration ■ Accessories DIN rail terminal sockets are available Spade and ring tongue terminal compatible Compatible with the following types of wire-pressed terminals Spade tongue terminal Max. 6.3 mm Min. 3 mm Ring tongue terminal 4 poles type Max. 6.3 mm Min. 3 mm 6 poles type ■ Forcibly guided contact structure Complies with safety standard ( IEC/EN61810-3 ) Equipped with forcibly guided contact structure that enables detection of contact welding and construction of safety circuit. ・ Designed so that contacts 1 Form A (a) and 1 Form B (b) will not close at the same time. ・ Designed with at least 0.5 mm space between contacts. Panasonic Industry Co., Ltd. Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー8ー 1 Form A (a) contact Guide Panasonic Industry Co., Ltd. 2022 1 Form B (b) contact ASCTB458E 202211 SF-N* SF-S SF-Y SF-Y SF-S SF-D SF-S 6 poles 3a3b 8 poles 4a2b 5a1b 4a4b *SF­N is available for production only in Europe ( Example ) － SF Relay Slim type 4a2b － Coil Condition De­energized Energized “a” contact “b“ contact Guide Armature “a” contact“b“ contactGuide Armature Normal “a” contact welded Contact gap is kept at min. 0.5 mm Contact gap is kept at min. 0.5 mm “b“ contact welded Abnormal Other contact gaps when contacts are welded State of other contacts 3­4 ( b contact ) Welded contact No. 3­4 ( b contact ) 5­6 ( b contact ) 7­8 ( a contact ) 9­10 ( a contact ) 11­12 ( a contact ) 13­14 ( a contact ) 5­6 ( b contact ) 7­8 ( a contact ) 9­10 ( a contact ) 11­12 ( a contact ) 13­14 ( a contact ) － >0.5 >0.5 >0.5 >0.5 － >0.5 >0.5 >0.5 >0.5 >0.5 >0.5 － >0.5 >0.5 >0.5 >0.5 >0.5 >0.5 － － － >0.5: contact gap is kept at min. 0.5 mm .020 inch Empty cells: either ON or OFF － : welded contact Schematic ( BOTTOM VIEW ) Standard Note: The table above shows the state of the other contacts. In case of form a contact weld the coil applied voltage is “Non­energized”. In case of form b contact weld the coil applied voltage is nominal ( energized ). ＋ Note: Contact gaps are shown at the initial state. If the contact transfer is caused by load switching, it is necessary to check the actual loading. － Panasonic Industry Co., Ltd. Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー9ー 1 3 4 7 8 11 12 2 5 6 9 10 13 14 Panasonic Industry Co., Ltd. 2022 ASCTB458E 202211 Power Relays (Over 2A) selector chart [Order of products: Max.contact rating (small to large)] Category Power Relays (~5 A) Product name S RELAYS LD-P RELAYS NC RELAYS 11.2 25.4 12 28 6.9 20.2 10.4 Type of relay 27.8 14.9 25.4 (Height includes standoff unit = mm) 25.4 10.9 Slim (2 Form C) Flat (2 Form C) AG3 Initial of part number • 2 Form A 2 Form B/3 Form A 1 Form B/4 Form A   4A polarized power relays Features Contact arrangement 1 Form A 2 Form C, 4 Form C Twin Single Twin Double layer contact of AgNi-AgSnO2 type +Au clad AgNi type AgNi type +Au clad 4 A 250 V AC 3 A   30 V DC 5 A 277 V AC 3 A   30 V DC 2c: 5 A 250 V AC*1 4c: 4 A 250 V AC*1 5 A   30 V DC 100 μA 100 mV DC 100 mA 5 V DC 100 μA 1 V DC 250 V AC, 48 V DC 277 V AC, 30 V DC 250 V AC, 220 V DC ● − − 200 mW 200 mW 360 mW (2 Form C)*2, 720 mW (4 Form C)*2 Operate [Set] voltage (initial) Max.70% V Max.75% V Max.80% V Release [Reset] voltage (initial) Min.10% V [Max.70% V] Min.5% V Min.10% V Contact material Contact rating (resistive) 30 A 20 A 15 A 10 A 8A 5A 3A Min. switching load (reference value) Max.switching voltage Latching types availability Rated operating power Coil data Time Characteristics (initial) Expected life Dielectric strength (initial) Operate [Set] time (initial) Release [Reset] time (initial) Mechanical life (ope.) Max.15 ms Max.10 ms Max.20 ms Max.10 ms [Max.15 ms] Max.10 ms (with diode) Max.10 ms Min.100 x106 Min.5 x106 Min.50 x106 750 V rms for 1 min 750 V rms for 1 min 1,000 V rms for 1 min Between contact sets 1,000 V rms for 1 min − 1,000 V rms for 1 min Between contact and coil 1,500 V rms for 1 min 4,000 V rms for 1 min 2,000 V rms for 1 min − 10,000 V − -55 to +65°C -40 to +85°C -40 to +70°C (2 Form C)*2 -40 to +55°C (4 Form C) ● Between open contacts Surge withstand voltage (between contact and coil) (initial) Ambient temperature Protective construction • Compliant with IEC/EN60335-1/ EN60079-15 (VDE approved) • 1 Form A 5A slim power relays AW8 • Transistor drive • 2 Form C/4 Form C 5A slim power relays 2 Form A 2 Form B, 3 Form A 1 Form B, 4 Form A Contact shape Contact data ALDP Dust cover − − Flux-resistant − − − Sealed ● ● ● Slim 2 Form C (1.05) Single side stable Unit weight (Approx.) Option Remarks 4-φ1.1 8ｰφ1.2 4 Form C (1.15) 12ｰφ1.3 Safety standards 7.0 14ｰφ1.2 4 Form C 14ｰφ1.2 UL, CSA UL/C-UL, VDE, CQC (Excluding Class F insulation ) UL, CSA 8g 4g 16 g (2 Form C), 19 g (4 Form C: slim), 18 g (4 Form C: Flat) Socket − Socket, Terminal socket − − *1: Dust cover　*2: Max.48 V DC Panasonic Industry Co., Ltd. Electromechanical Control Business Division industrial.panasonic.com/ac/e/ 8ｰφ1.2 4.7 PC board pattern (BOTTOM VIEW) ● indicates input terminal 2.54mm grid 11.5 Flat 2 Form C ー 10 ー Panasonic Industry Co., Ltd. 2023 ASCTB366E 202304 Power Relays (Over 2A) selector chart Category Power Relays (~5 A) Product name Power Relays (~10 A) PA-N RELAYS PF RELAYS 5 5 20 11 20.2 28 15 12.5 Type of relay DS-P RELAYS 10.5 (Height includes standoff unit = mm) APAN3 Initial of part number • Compliant with European standards • 1 Form A 5A Slim power relays •1  Form A/1 Form C 6A Slim power meet IEC61010 reinforced insulation relays Features Contact arrangement Contact material Contact rating (resistive) 30 A 20 A 15 A 10 A 8A 5A 3A Min. switching load (reference value) Twin Single Single AgNi type +Au AgNi type, AgNi type +Au plated AgSnO2 type +Au flashed 5 A 250 V AC 5 A   30 V DC 6 A 250 V AC 6 A 250 V AC No Au plating type Au plating type 100 μA 100ｍ V DC 100 mA 5 V DC 1 mA 1 V DC Dielectric strength (initial) 5 A 250 V AC 5 A   30 V DC 10 mA 5 V DC 10 mA 5 V DC 250 V AC 250 V AC, 125 V DC (0.2 A) − ● 110 mW 170 mW (4.5 to 24 V DC) 217 mW (48 V DC), 175 mW (60 V DC) 300 mW Operate [Set] voltage (initial) Max.70% V Max.70% V Max.80% V Release [Reset] voltage (initial) Min.5% V Min.5% V Min.10% V [Max.80% V] Operate [Set] time (initial) Max.10 ms Max.8 ms Max.10 ms Release [Reset] time (initial) Max.5 ms Max.4 ms Max.5 ms [Max.10 ms] Mechanical life (ope.) Min.20×106 Min.5 x106 Min.50 x106 1,000 V rms for 1 min 1,000 V rms for 1 min 1,000 V rms for 1 min − − 3,000 V rms for 1 min 4,000 V rms for 1 min 3,000 V rms for 1 min 6,000 V 6,000 V 5,000 V -40 to +90°C -40 to +85°C Dust cover − − Flux-resistant − − − Sealed ● ● ● Between open contacts Between contact sets Between contact and coil Surge withstand voltage (between contact and coil) (initial) Ambient temperature Protective construction 8 A 250 V AC 5 A   30 V DC − Rated operating power Expected life 1 Form A 1 Form B, 2 Form A 1 Form A 250 V AC, 110 V DC (0.4 A) Max.switching voltage Time Characteristics (initial) • 1 Form A 8A (AC) 5A(DC), 1 Form A 1 Form B/2 Form A 5A (AC/DC) small polarized power relays 1 Form A, 1 Form C Latching types availability Coil data AGP 1 Form A Contact shape Contact data APF 2,000 V rms for 1 min − -40 to +60°C (1 Form A, 2 Form A) -40 to +65°C (1 Form A 1 Form B) − 1 Form A 1 Form A 2ｰφ1.3 1.2 2ｰφ1 φ1 φ1 φ1.2 φ1.2 5.04 3.78 1.9 6ｰφ1.2 2 coil latching only 21.42 1 Form C 2ｰφ1 1 Form A 1 Form B, 2 Form A 3ｰφ1.3 1.2 PC board pattern (BOTTOM VIEW) ● indicates input terminal 2.54mm grid 3.78 5.04 5.04 21.42 1.9 8ｰφ1.2 2 coil latching only Safety standards Unit weight (Approx.) Option Remarks UL/C-UL, VDE UL/C-UL, VDE 3g 5g 4.5 g Socket − Socket − − − Panasonic Industry Co., Ltd. Electromechanical Control Business Division industrial.panasonic.com/ac/e/ UL/C-UL, VDE ー 11 ー Panasonic Industry Co., Ltd. 2023 ASCTB366E 202304 Power Relays (Over 2A) selector chart Category Power Relays (~10 A) Product name DW RELAYS ST RELAYS 10 24 14 18.8 ADW Initial of part number • 1 Form A 8A/16A (TV-8 rated)* ,   small polarized power relays Features Contact shape Contact material 30 A 20 A 15 A 10 A 8A 5A 3A Min. switching load (reference value) Max.switching voltage Latching types availability Rated operating power Time Characteristics (initial) Expected life Dielectric strength (initial) • TV-3 rated • 1 Form A 1 Form B/2 Form A 8A polarized power relays 1 Form A 1 Form B, 2 Form A ADE • Meet European standards • 1 Form A/2 Form A/1 Form A 1 Form B 10A/8A polarized power relays 1 Form A 1 Form B, 2 Form A 1 Form A Single Single Single AgSnO2 type AgSnO2 type +Au flashed AgSnO2 type 16 A 277 V AC* 10 A 250 V AC 10 A   30 V DC 8 A 250 V AC 5 A   30 V DC 8 A 250 V AC Standard type Inrush type (Low profile type) 100 mA 5 V DC 100 mA 5 V DC 100 mA 5 V DC 250 V AC 277 V AC 8 A 250 V AC 8 A   30 V DC 100 mA 5 V DC 100 mA 5 V DC 250 V AC, 30 V DC 250 V AC, 30 V DC ● (Latching type only) ● ● 200 mW (1 coil latching) 400 mW (2 coil latching) Approx 240 mW 200 mW Operate [Set] voltage (initial) Max.80% V Max.80% V Max.70% V Release [Reset] voltage (initial) Max.80% V Min.10% V [Max.80% V] Min.10% V [Max.70% V] Operate [Set] time (initial) Max.15 ms Max.15 ms Max.10 ms Release [Reset] time (initial) Max.15 ms Max.10 ms [Max.15 ms] Max.5 ms [Max.10 ms] Min.106 Min.10 x106 Min.10 x106 1,000 V rms for 1 min 1,200 V rms for 1 min 1,000 V rms for 1 min − 2,000 V rms for 1 min − 5,000 V rms for 1 min 3,750 V rms for 1 min 5,000 V rms for 1 min 12,000 V 6,000 V 12,000 V -40 to +85°C (Max.8 A) -40 to +70°C (Max.8 to 16 A) -40 to +60°C -40 to +70°C Dust cover − − − Flux-resistant ● − − Sealed − ● ● Mechanical life (ope.) Between open contacts Between contact sets Between contact and coil Surge withstand voltage (between contact and coil) (initial) Ambient temperature Protective construction 12.5 AR2 1 Form A Contact arrangement Coil data 12.5 25 11.3 15.8 (Height includes standoff unit = mm) Contact rating (resistive) 31 10 24 Type of relay Contact data DE RELAYS 4,000 V rms for 1 min Single side stable 6ｰφ1.4 Single side stable Safety standards Unit weight (Approx.) Option Remarks 4 or5ｰφ1.2 3.5 7.5 PC board pattern (BOTTOM VIEW) ● indicates input terminal 2.54mm grid 17.5 2 coil latching only 6ｰφ1.2 2 coil latching 8ｰφ1.4 UL/C-UL, VDE, CQC UL, CSA, VDE UL/C-UL, VDE 8 g (Low profile type: 7.5 g) 10 g 7g − Socket − * TV-8 rated and inrush type: 16 A only − − Panasonic Industry Co., Ltd. Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー 12 ー Panasonic Industry Co., Ltd. 2023 ASCTB366E 202304 Power Relays (Over 2A) selector chart Category Power Relays (~10 A) Product name DK RELAYS DY RELAYS LQ RELAYS 12.5 20 10 Type of relay 16 10 15 20 (Height includes standoff unit = mm) 10 20 15 20 10 Initial of part number AW3 • 1 Form A 10A, 1 Form A 1 Form B/2 Form A 8A small polarized power relays Features Contact shape Contact rating (resistive) 30 A 20 A 15 A 10 A 8A 5A 3A Min. switching load (reference value) Max.switching voltage Expected life Dielectric strength (initial) 10 mA 5 V DC 1 Form A, 1 Form C Single Single AgSnO2 type +Au flashed AgNi type 10 A 125 V AC 5 A 250 V AC 5 A   30 V DC 8 A 250 V AC 8 A   30 V DC 10 mA 5 V DC 10 mA 5 V DC 100 mA 5 V DC 10 mA 5 V DC 250 V AC, 125 V DC (0.2 A) 250 V AC, 125 V DC (0.2 A) ● ● − 200 mW 200 mW 200 mW (1 Form A ), 400 mW (1 Form C) 250 V AC, 30 V DC Max.75% V Operate [Set] voltage (initial) Max.70% V Max.70% V Release [Reset] voltage (initial) Min.10% V [Max.70% V] Min.10% V [Max.70% V] Min.5% V Max.10 ms Max.10 ms Max.20 ms Max.8 ms [Max.10 ms] Max.8 ms [Max.10 ms] Max.20 ms (With diode) Min.50 x106 Min.50 x106 Min.10 x106 1,000 V rms for 1 min 1,000 V rms for 1 min 1,000 V rms for 1 min (1 Form A), 750 V rms for 1 min (1 Form C) Operate [Set] time (initial) Release [Reset] time (initial) Mechanical life (ope.) Between open contacts 4,000 V rms for 1 min − − Between contact sets − Between contact and coil 4,000 V rms for 1 min 4,000 V rms for 1 min 4,000 V rms for 1 min 10,000 V 10,000 V 8,000 V Surge withstand voltage (between contact and coil) (initial) 4,000 V rms for 1 min -40 to +65°C -40 to +70°C -40 to +85°C Dust cover − − − Flux-resistant − − − Sealed ● ● ● Ambient temperature Protective construction 1 Form A 1 Form B 10 A 250 V AC 10 A   30 V DC 8 A 250 V AC 8 A   30 V DC ALQ • Compliant with IEC/EN60335-1* /EN60079-15 (VDE approved) • 1 Form A/1 Form C 10A small power relays Form A Rated operating power Time Characteristics (initial) AgNi type + Au flashed 10 A 250 V AC 10 A   30 V DC Latching types availability Coil data 1 Form A Single AgSnO2 type + Au flashed Contact material Contact data • 1 Form A 10A, 1 Form A 1 Form B 8A small polarized power relays 1 Form A 1 Form B, 2 Form A 1 Form A Contact arrangement ADY 1 Form A 2 coil latching only 2ｰφ1.1 1 Form A 2 coil latching only 2ｰφ1.1 1 Form A 10.16 3ｰφ0.9 4ｰφ1.3 7.62 PC board pattern (BOTTOM VIEW) ● indicates input terminal 2.54mm grid 7.62 3ｰφ0.9 1 Form A 1 Form B, 2 Form A 2 coil latching only 4ｰφ1.1 1 Form A 1 Form B 3ｰφ0.9 2 coil latching only 4ｰφ1.1 1 Form C 10.16 5.08 2.54 5ｰφ1.3 7.62 3ｰφ0.9 Safety standards Unit weight (Approx.) Option Remarks UL, CSA, ( VDE: special order only ) 5g 6g Socket − UL, CSA, VDE UL/C-UL, VDE, CQC 6g 7g Socket − − *1 Form A type is compatible except for the bottom surface Panasonic Industry Co., Ltd. Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー 13 ー Panasonic Industry Co., Ltd. 2023 ASCTB366E 202304 Power Relays (Over 2A) selector chart Category Power Relays (~10 A) Product name Power Relays (~20 A) JW RELAYS SP RELAYS 12.8 28.6 AJW 1 Form A, 1 Form C, 2 Form A, 2 Form C Contact arrangement Contact shape Contact rating (resistive) 30 A 20 A 15 A 10 A 8A 5A 3A 5 A 250 V AC 5 A 30 V DC Standard type 100 mA 5 V DC Max.switching voltage Dielectric strength (initial) 1 Form C, 1 Form A 1 Form B, 1 Form A, 1 Form B 2 Form C, 2 Form A, 2 Form B Single 15 A 250 V AC 10 A   30 V DC 10 A 250 V AC 10 A   30 V DC High capacity type 2c 4c 100 mA 5 V DC 100 mA 5 V DC 100 mA 5 V DC AgSnO2 type + Au flashed AgSnO2 type 16 A 250 V AC 10 A 250 V AC 100 mA 5 V DC 100 mA 5 V DC 250 V AC, 30 V DC − ● ● 300 mW 150 mW (1 coil latching) 250 mW (Single side stable, 2 coil latching) 530 mW 250 V AC Operate [Set] voltage (initial) Max.70% V Max.70% V Max.75% V [Max.70% V] Release [Reset] voltage (initial) Min.10% V Min.10% V [Max.70% V] Min.10% V [Max.70% V] Operate [Set] time (initial) Max.15 ms Max.50 ms Max.20 ms Release [Reset] time (initial) Max.5 ms Max.20 ms [Max.50 ms] Max.20 ms Mechanical life (ope.) Min.5 x106 Min.50 x106 Min.5 x106 1,500 V rms for 1 min 1,000 V rms for 1 min 1,000 V rms for 1 min Between open contacts − 3,000 V rms for 1 min − 5,000 V rms for 1 min 3,000 V rms for 1 min 4,000 V rms for 1 min 10,000 V − 10,000 V -40 to +60°C (Class E) -40 to +85°C (Class B) -50 to +60°C -40 to +70°C Dust cover − ● − Flux-resistant ● − ● Sealed ● Between contact sets 3,000 V rms for 1 min (2 poles) Between contact and coil Surge withstand voltage (between contact and coil) (initial) Ambient temperature Protective construction 4 Form C 250 V AC, 30 V DC Rated operating power Expected life 2 Form C ADJ • 1-pole/2-pole 16A polarized power relays • Clearance and creepage distance   is Min.8mm (Contact and coil) Twin 10 A 250 V AC 10 A   30 V DC Latching types availability Time Characteristics (initial) 1 Form A, 1 Form C Single Min. switching load (reference value) Coil data • 2 Form C 15A, 4 Form C 10A   polarized power relays 1 Form A: AgSnO2 type Stationary: AgSnO2 type +Au flashed 1 Form C, 2 Form A, 2 Form C: AgNi type Movable: AgSnO2 type Contact material 16.5 AR1 • TV-5 rated (1a)* • 1 Form A/1 Form C/2 Form A/ 2 Form C 5A/10A universal power relays Features 13 29 22 20 Initial of part number Contact data 25.6 50 Type of relay (Height includes standoff unit = mm) DJ RELAYS − ●* 10ｰφ2.5 15.24 2 Form C 1 Form A 16ｰφ2.5 4 Form C 3.5 2.4 2 coil latching only φ1.5 2 Form C 7.62 15.24 7.62 20 4ｰφ1.5 φ1.5 1 Form C 10.16 10.16 10.16 10.16 7.6 PC board pattern (BOTTOM VIEW) ● indicates input terminal 2.54mm grid 2,000 V rms for 1 min 2 coil latching only 10.16 10.16 10.16 10.16 Safety standards Unit weight (Approx.) Option Remarks UL, CSA, VDE, CQC (AJW7211 only) UL, CSA, VDE 13 g 50 g Socket UL/C-UL, VDE, CQC 65 g 14 g Terminal socket, Mounting board − − Test button type is available * Please contact our sales representative for details * Please contact our sales representative for details Panasonic Industry Co., Ltd. Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー 14 ー Panasonic Industry Co., Ltd. 2023 ASCTB366E 202304 Power Relays (Over 2A) selector chart Category Power Relays (~20 A) Product name JV-N RELAYS LZ RELAYS Type of relay 12.5 28.8 16 22 LZ-N RELAYS 12.5 28.8 15.7 15.7 10.9 (Height includes standoff unit = mm) AJVN Initial of part number • TV-5 rated • 1 Form A 16A, low profile: 10.9 mm • Low profile: 15.7mm height   power relays for heater control   1 Form A/1 Form C 16A power relays Features Contact arrangement Contact shape Contact material Contact rating (resistive) Min. switching load (reference value) 1 Form A 1 Form A, 1 Form C Single Single Single AgSnO2 type AgSnO2 type AgSnO2 type 16 A 250 V AC 16 A 250 V AC 100 mA 5 V DC 100 mA 5 V DC 100 mA 5 V DC 277 V AC, 110 V DC (0.3 A) 440 V AC 440 V AC − − − 200 mW (4.5 to 48 V DC) 600 mW (100 V DC) 400 mW 400 mW Operate [Set] voltage (initial) Max.75% V (4.5 to 48 V DC) Max.60 V DC (100 V DC) Max.70% V Max.70% V Release [Reset] voltage (initial) Min.5% V (4.5 to 48 V DC) Min.4 V DC (100 V DC) Min.10% V Min.10% V Operate [Set] time (initial) Max.12 ms (4.5 to 48 V DC) Min.8 ms (100 V DC) Max.15 ms Max.15 ms Max.5 ms Max.5 ms Max.5 ms Min. 20 x106 Min.10 x106 Min.106 1,000 V rms for 1 min 1,000 V rms for 1 min 1,000 V rms for 1 min − − − 2,500 V rms for 1 min 5,000 V rms for 1 min 5,000 V rms for 1 min 4,500 V 10,000 V 10,000 V -40 to +70°C, -40 to +60°C (100 V DC) -40 to +85°C (Class B) -40 to +105°C (Class F) -40 to +85°C (Class B) -40 to +105°C (Class F) Max.switching voltage Rated operating power Expected life Dielectric strength (initial) Release [Reset] time (initial) Mechanical life (ope.) Between open contacts Between contact sets Between contact and coil Surge withstand voltage (between contact and coil) (initial) Ambient temperature Protective construction Dust cover − − − Flux-resistant ● ● ● − ●* − Sealed 17.78 1 Form A 20 6ｰφ1.3 20 5 6ｰφ1.3 12.7 1 Form C （R） 2 20 5 2 （R） 1 Form C 5 8ｰφ1.3 7.5 1 PC board pattern (BOTTOM VIEW) ● indicates input terminal 1 Form A 5 7.5 2ｰφ0.9 7.5 Time Characteristics (initial) 1 Form A, 1 Form C 16 A 125 V AC 10 A 277 V AC 10 A   30 V DC Latching types availability Coil data • TV-5 rated and meet EN60335-1   GWT Low profile: 15.7mm height   1 Form A/1 Form C 16A power relays 20 5 5 8ｰφ1.3 7.5 Contact data 30 A 20 A 15 A 10 A 8A 5A 3A ALZN ALZ 10.16 Safety standards Unit weight (Approx.) Option Remarks UL, CSA, VDE UL/C-UL, VDE UL/C-UL, VDE 8g 12 g 11 g − − − − * Please contact our sales representative for details − Panasonic Industry Co., Ltd. Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー 15 ー Panasonic Industry Co., Ltd. 2023 ASCTB366E 202304 Power Relays (Over 2A) selector chart Category Power Relays (~20 A) Product name Power Relays (~30 A) LF RELAYS LF-G RELAYS 15.7 30.1 Type of relay 15.7 30.1 (Height includes standoff unit = mm) • TV-8 rated • 1 Form A 20A power relays for   compress or and invertor load Contact arrangement Contact shape 30 A 20 A 15 A 10 A 8A 5A 3A 1 Form A 1 Form A Single Single AgSnO2 type High capacity 1.8 mm gap type 100 mA 5 V DC 100 mA 5 V DC 100 mA 5 V DC 100 mA 5 V DC 250 V AC 250 V AC 30 A 277 V AC 25 A 277 V AC 1 Form A 2 Form A 100 mA 5 V DC 100 mA 5 V DC 277 V AC, 30 V DC − − − 900 mW 1.4 W 1.7 to 2.7 VA (AC) , 1.92 W (DC) Operate [Set] voltage (initial) Max.70% V Max.70% V Max.70% V Release [Reset] voltage (initial) Min.10% V Min.10% V Min.15% V (AC) , Min.10% V (DC) Rated operating power Max.20 ms Max.20 ms Max.30 ms Max.15 ms (With diode) Max.10 ms Max.30 ms (AC) , Max.10 ms (DC) Min.2 x 106 Min.106 (Contact gap: 1.5 mm) Min.500 x 103 (Contact gap: 1.8 mm) Min.5 x 106 (AC) Min.10 x 106 (DC) 1,000 V rms for 1 min 2,500 V rms for 1 min 2,000 V rms for 1 min − − 5,000 V rms for 1 min 4,000 V rms for 1 min 5,000 V rms for 1 min 10,000 V 6,000 V 10,000 V -50 to +55°C Operate [Set] time (initial) Release [Reset] time (initial) Mechanical life (ope.) Between open contacts Between contact sets Between contact and coil Surge withstand voltage (between contact and coil) (initial) 4,000 V rms for 1 min − -40 to +60°C -40 to +60°C, -40 to +85°C* Dust cover − − ● Flux-resistant ● ● ● (PC board terminal) Sealed − − − Ambient temperature Protective construction High capacity 1.5 mm gap type 2 Form A Single AgSnO2 type standard type Latching types availability Dielectric strength (initial) 1 Form A 20 A 250 V AC Max.switching voltage AHE • 1 Form A 22A/33A Compact power • TV-10/TV-15 rated   relays for solar inverter load • 1 Form A 30A, 2 Form A 25A power relays 22 A 250 V AC 31 A 250 V AC 33 A 250 V AC Min. switching load (reference value) Expected life 35.8 ALFG AgSnO2 type Contact material Time Characteristics (initial) 23.3 ALF Features Coil data 33 23.3 Initial of part number Contact rating (resistive) 50 15.7 30.1 23.3 Contact data HE RELAYS PC board terminal 13.8 φ2 13.8 27.6 φ2 12 PC board pattern (BOTTOM VIEW) ● indicates input terminal φ2 Panel cutout Plug-in terminal type 12 φ2 27.6 φ1.8 12 10 φ1.8 φ1.8 12 10 TM type 2ｰφ4.5 47.6 φ1.8 PC board terminal, Screw teminal type are also available (TMP type is also available) Safety standards 40 2ｰφ4.5 UL/C-UL, VDE UL/C-UL, VDE 23 g 23 g 80 to 120 g Option − − Terminal socket Remarks − * Coil holding voltage is 45 to 85%V − Unit weight (Approx.) UL, CSA, VDE, CQC Panasonic Industry Co., Ltd. Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー 16 ー Panasonic Industry Co., Ltd. 2023 ASCTB366E 202304 Power Relays (Over 2A) selector chart Category Power Relays (30 A~) Product name HE-S RELAYS 36 35A 30 90A 38 33 38 33 40 (Height includes standoff unit = mm) 38.8 AHES AHE • TV-8 / TV-10 rated • 2 Form A/2 Form A 1 Form B 40A compact power relays Features Contact arrangement 1 Form A Single Single AgSnO2 type (Form A) AgNi type +Au flashed (Form B) Contact material • 1 Form A 35A/48A/90A compact power relays for inverter 2 Form A, 2 Form A 1 Form B Contact shape 120 A 60 A 50 A 40 A 30 A 20 A 10 A Min. switching load (reference value) AgSnO2 type (35 A) 48 A 490 V AC 48 A   48 V DC 90 A 277 V AC 90 A   60 V DC 60 A 490 V AC 40 A 277 V AC Form A 35 A type 48 A type 90 A type 100 mA 5 V DC 100 mA 5 V DC 100 mA 5 V DC 100 mA 5 V DC 480 V AC, 110 V DC Max.switching voltage AgNi type (48 A/90 A) 35 A 490 V AC 35 A   48 V DC Latching types availability 490 V AC, 48 V DC − Rated operating power 490 V AC − 1.88 W 1.92 W Max.75% V Max.70% V Coil data Operate [Set] voltage (initial) Release [Reset] voltage (initial) Min.5% V Min.10% V Time Characteristics (initial) Operate [Set] time (initial) Max.30 ms Max.30 ms Release [Reset] time (initial) Max.10 ms Max.10 ms Mechanical life (ope.) Min.5 x 106 Expected life Min.10 x 106 (35 A/48 A) Min.106 (90 A) Between open contacts 2,000 V rms for 1 min (Between open Form A contacts) Between contact sets 5,000 V rms for 1 min (Between Form A contact sets) − Between contact and coil 5,000 V rms for 1 min (Between Form A contact and coil) 5,000 V rms for 1 min Surge withstand voltage (between contact and coil) (initial) 10,000 V (Between From A contact and coil) 10,000 V Ambient temperature -40 to 70°C (Max. carrying current 40 A) -40 to 85°C (Max. carrying current 35 A, transport and storage) * -50 to +55°C, -50 to +85°C* Dust cover − − Flux-resistant ● ● Sealed − − Option Remarks 11 11 Unit weight (Approx.) 19 R0.8 1.6 1.6 Safety standards 4 24 4 24 2ｰφ2 32 32 UL/C-UL, VDE, CQC UL, CSA, VDE 64 g R0.9 1.2 R0.6 32 UL/C-UL, VDE 80 g − 85 g − * When using at 55°C or higher, the coil holding voltage should be 30 to 60% V. * Coil holding voltage is 50 to 60%V Panasonic Industry Co., Ltd. Electromechanical Control Business Division industrial.panasonic.com/ac/e/ 20 12 13.3 23.5 6ｰφ2 R0.8 19 6.5 1.8 4.7 90A Type 48A Type 35A Type 2‒φ1.6 2‒φ2.2 3.6 2‒φ1.6 21.3 PC board pattern (BOTTOM VIEW) ● indicates input terminal 22.9 7.6 21.3 7.6 2 Form A 1 Form B 8.4 18.6 2 Form A 1.3 Protective construction 2,000 V rms for 1 min 8.4 18.6 Dielectric strength (initial) 33 36.3 36.3 Initial of part number Contact rating (resistive) 48A 38 Type of relay Contact data HE RELAYS PV TYPE ー 17 ー Panasonic Industry Co., Ltd. 2023 ASCTB366E 202304 Power Relays (Over 2A) selector chart Category Power Relays (30 A~) Product name DJ-H RELAYS DZ-S RELAYS 15 39 38.5 50 30 40 17.5 30.2 Type of relay HE-N RELAYS 43 (Height includes standoff unit = mm) ADJH Initial of part number Features • Meet IEC62055-31 UC3   1 Form A 90A power latching relays • High capacity 120A 490V AC   1 Form A power relays 1 Form A 1 Form A 1 Form A Single Single Single AgSnO2 type AgSnO2 type AgNi type 90 A 276 V AC 120 A 490 V AC 100 mA 125 V AC 100 mA 5 V DC Contact shape Contact material Contact rating (resistive) 120 A 60 A 50 A 40 A 30 A 20 A 10 A 50 A 277 V AC Min. switching load (reference value) 100 mA 5 V DC 480 V AC 276 V AC 800 V AC ● (Latching only) ● (Latching only) − 1 W (1 coil latching) 2 W (2 coil latching) 1.5 W (1 coil latching) 3 W (2 coil latching) 2.5 W Max.75% V Max.switching voltage Latching types availability Rated operating power Coil data Time Characteristics (initial) Expected life Dielectric strength (initial) Operate [Set] voltage (initial) Max.75% V Max.70% V Release [Reset] voltage (initial) Max.75% V Max.70% V Min.5% V Operate [Set] time (initial) Max.20 ms Max.20 ms Max.30 ms Release [Reset] time (initial) Max.20 ms Max.20 ms Max.10 ms Min.106 Min.100 x 103 Min.106 1,500 V rms for 1 min 2,000 V rms for 1 min 2,000 V rms for 1 min − − − 4,000 V rms for 1 min 4,000 V rms for 1 min 5,000 V rms for 1 min 12,000 V 12,000 V 10,000 V -40 to +85°C -40 to +85°C -40 to +55°C*1 -40 to +85°C*2 Mechanical life (ope.) Between open contacts Between contact sets Between contact and coil Surge withstand voltage (between contact and coil) (initial) Ambient temperature Protective construction AHE6 • 1 Form A 50A latching relays for   lighting and motor load Contact arrangement Contact data ADZS Dust cover − ● − Flux-resistant ● − ● Sealed − − − 25.9 27.5 R0.3 19.4 6.75 3.6 2ｰφ2.8 2 coil latching only Safety standards Unit weight (Approx.) Option Remarks 6 − 1.2 （R） UL/C-UL, VDE − UL/C-UL, VDE 31 g 45 g 115 g − − − IEC62055-31 UC3 *1: Coil holding voltage is 40 to 100%V (at 20°C) *2: Coil holding voltage is 50 to 60%V (at 85°C) Reverse polarity type is available Panasonic Industry Co., Ltd. Electromechanical Control Business Division industrial.panasonic.com/ac/e/ 32 18.75 7.5 5 PC board pattern (BOTTOM VIEW) ● indicates input terminal 5 2.8 2 or 3ｰφ1.2 ー 18 ー Panasonic Industry Co., Ltd. 2023 ASCTB366E 202304 Power Relays (Over 2A) selector chart Category Power Relays (30 A~) Product name HE-R RELAYS 58.0 35.0 47.0 Type of relay 58.0 (Height includes standoff unit = mm) Contact arrangement 4 Form A, 4 Form A 1 Form B Contact shape Single Form A contact: AgSnO2 type Form B contact: Au plated AgNi type Contact material Contact rating (resistive) 120 A 60 A 50 A 40 A 30 A 20 A 10 A Min. switching load (reference value) 40 A 480 V AC (Form A) Form A contact: 100 mA 24 V DC Form B contact:   10 mA   5 V DC 480 V AC Max.switching voltage Latching types availability − Rated operating power Expected life Max. 5% V Operate [Set] time (initial) Max. 50 ms Release [Reset] time (initial) Max. 30 ms Min. 100 x 103 Mechanical life (ope.) Between contact sets Between contact and coil Surge withstand voltage (between contact and coil) (initial) Ambient temperature Protective construction Max. 75% V Operate [Set] voltage (initial) Release [Reset] voltage (initial) Between open contacts Dielectric strength (initial) 4W 2,000 Vrms for 1 min (Between open Form A contacts) 5,000 V rms for 1 min (Between Form A contact sets) 5,000 V rms for 1 min (Between Form A contact and coil) 10,000 V (Between From A contact and coil) –40 to 55°C, –40 to 85°C * Dust cover − Flux-resistant ● Sealed − 2.5 PC board pattern (BOTTOM VIEW) ● indicates input terminal 12.9 13.5 13.5 13.5 28.8 14.6 R0.5 1.0 1.6 4 Form A 1 Form B type only Safety standards UL/C-UL, VDE Unit weight (Approx.) approx. 180 g Option Remarks R0.8 11.0 21.0 Time Characteristics (initial) AHER • Compact size 4 Form A and 1 Form B 40A power relays for EVSE and industrial equipment Features Coil data 47.0 4 Form A １Form B Initial of part number Contact data 35.0 4 Form A − * Coil holding voltage is 35 to 50% V Panasonic Industry Co., Ltd. Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー 19 ー Panasonic Industry Co., Ltd. 2023 ASCTB366E 202304 High-capacity DC cut off Relays selector chart Category High-capacity DC cut off relays Product name HE-V RELAYS 50 41 Type of relay 39.4 (Height includes standoff unit = mm) AHEV Initial of part number • High capacity Max. 1,000 V DC, 20 A cut-off power relay Features 2 Form A Contact arrangement Contact shape Single Contact material Contact data Contact rating (resistive) AgNi type 100 A 80 A 60 A 40 A 20 A 10 A 5A Min. switching load (reference value) 100 mA 5 V DC Latching types availability − Rated operating power Coil data Time Characteristics (initial) Expected life Dielectric strength (initial) 1.92 W Max. 70% V Operate [Set] voltage (initial) Release [Reset] voltage (initial) Min. 5% V Operate [Set] time (initial) Max. 30 ms Release [Reset] time (initial) Max. 10 ms Min. 106 Mechanical life (ope.) Between open contacts 2,000 V rms for 1 min Between contact sets 4,000 V rms for 1 min Between contact and coil 5,000 V rms for 1 min Surge withstand voltage (between contact and coil) (initial) 10,000 V -40 to +55°C -40 to +85°C *2 Ambient temperature Protective construction *1 25 A 600 V DC 20 A 800 V DC Dust cover − Flux-resistant ● Sealed − 10-φ2.1 15.15 10.25 16.5 40 PC board pattern (BOTTOM VIEW) ● indicates input terminal 4.4 4.4 4.4 4.4 13.2 37.6 Safety standards UL/C-UL, VDE 120 g Unit weight (Approx.) Option socket − *1: Each 1 Form A contact connected in series *2: When coil holding voltage is 33 to 60% of rated coil voltage Remarks Panasonic Industry Co., Ltd. Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー 20 ー Panasonic Industry Co., Ltd. 2023 ASCTB280E 202304 Signal Relays ( 2 A or less ) selector chart Category Signal Relays ( 2 A or less ) Product name GN RELAYS GQ RELAYS 5.7 10.6 Type of relay ( Height includes standoff unit: mm ) 5.7 10.6 7.2 10.6 7.2 10.6 9 GQ RELAYS ( TH type ) 5.2 5.2 7.2 10.6 10 7.2 10.6 5.4 AGN2 Initial of part number • High sensitivity 100 mW type • 2 Form C and 1 A Compact, Slim body type relays Features Contact arrangement Contact shape Contact material Contact data Contact rating ( resistive ) 4 3 2 1 A A A A Min. switching load ( reference value ) AGQ2 • High sensitivity 100 mW type • 2 Form C and 1 A Compact flat body type relays AGQ2 •S  mall size controlled 3.5 A inrush current possible • 2.4 V coil voltage type newly available DC battery operation 2 Form C 2 Form C 2 Form C Crossbar Twin Crossbar Twin Crossbar Twin Stationary: AgPd ＋ Au­clad Movable  : AgPd Stationary: AgPd ＋ Au­clad Movable  : AgPd AgNi ＋ Au­plating 2 A   30 V DC 2 A   30 V DC 10 µA 10 mV DC 10 µA 10 mV DC 1 A   30 V DC 10 µA 10 mV DC Latching types availability ● ● ● 1.5, 3, 4.5, 6, 9, 12, 24 V DC 1.5, 3, 4.5, 6, 9, 12, 24 V DC 1.5, 2.4, 3, 4.5, 6, 9, 12, 24 V DC Single side stable: 140 mW ( 1.5 to 12 V DC ), 230 mW ( 24 V DC ) Latching type & High sensitivity: 100 mW ( 1.5 to 12 V DC ), 120 mW ( 24 V DC ) Single side stable: 140 mW ( 1.5 to 12 V DC ), 230 mW ( 24 V DC ) Latching type & High sensitivity: 100 mW ( 1.5 to 12 V DC ), 120 mW ( 24 V DC ) Single side stable: 140 mW ( 1.5 to 12 V DC ), 230 mW ( 24 V DC ) Latching type: 100 mW ( 1.5 to 12 V DC ), 120 mW ( 24 V DC ) Operate [ Set ] voltage ( initial ) Max. 75% V, Max. 80% V ( High sensitivity ) Max. 75% V, Max. 80% V ( High sensitivity ) Max. 75 % V [ Max. 75 % V ] Rated coil voltage Coil data 5.4 Rated operating power Release [ Reset ] voltage ( initial ) Min. 10% V [ Max. 75% V ] Min. 10% V [ Max. 75% V ] Min. 10 % V [ Max. 75 % V ] Time characteristics ( initial ) Operate [ Set ] time ( initial ) Max. 4 ms Max. 4 ms Max. 4 ms Expected life Mechanical life ( ope. ) Dielectric strength ( initial ) Between open contacts Between contact and coil Between contact sets 1,000 Vrms for 1 min 1,000 Vrms for 1 min 1,000 Vrms for 1 min Between open contacts 1,500 V 10 × 160 µs ( FCC Part 68 ) 1,500 V 10 × 160 µs ( FCC Part 68 ) 1,500 V ( 10 × 160 µs ) ( FCC Part 68 ) 2,500 V 2 × 10 µs 2,500 V 2 × 10 µs 2,500 V 2 × 10 µs ( Telcordia ) －40 to ＋85 ℃/ －40 to ＋70 ℃ ( High sensitivity ) －40 to ＋85 ℃/ －40 to ＋70 ℃ ( High sensitivity ) －40 to ＋85 ℃ Dust cover − − − Flux­resistant − − − Sealed ● ●   750 Vrms for 1 min   750 Vrms for 1 min   750 Vrms for 1 min 1,500 Vrms for 1 min 1,500 Vrms for 1 min 1,500 Vrms for 1 min φ0.85 φ0.85 PC board terminal PC board terminal 3.2 2.2 3.2 2.2 2.2 3.1 6.74 0.8 5.3 PC board pattern ( BOTTOM VIEW ) ● indicates input terminal Surface-mount terminal A type （TOP VIEW） Safety standards 2.2 3.2 2.2 φ0.85 PC board terminal 3.2 2.2 2.2 0.8 Surface-mount terminal A type （TOP VIEW） 2.2 5.08 2.2 3.2 3.2 2.2 ● 3.2 2.2 2.2 0.8 2.66 Protective construction Max. 4 ms Min. 50 × 106 6.74 Ambient temperature Max. 4 ms Min. 50 × 106 5.08 Between contact and coil Max. 4 ms Min. 50 × 106 2.66 Surge withstand voltage ( initial ) Release [ Reset ] time ( initial ) Surface-mount terminal A type （TOP VIEW） UL/C­UL, BSI UL/C­UL, BSI UL/C­UL, BSI 1g 1g 1g Option − − − Remarks − − − Unit weight ( Approx. ) Panasonic Industry Co., Ltd. Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー 21 ー Panasonic Industry Co., Ltd. 2023 ASCTB39E 202304 Signal Relays ( 2 A or less ) selector chart Category Signal Relays ( 2 A or less ) Product name TX RELAYS TX RELAYS ( TH type ) 7.4 15 15 7.4 15 Contact shape Contact material Contact rating ( resistive ) 4 3 2 1 A A A A Min. switching load ( reference value ) Coil data Rated operating power 8.4 ATX2 •C  ontrolled 7.5 A inrush current possible •2  Form C Compact body type relays ATXS2 •H  igh sensitivity 50 mW type • 2 Form C and 1 A Compact body type relays 2 Form C 2 Form C 2 Form C Crossbar Twin Crossbar Twin Crossbar Twin Ag ＋ Au­plating Standard: Ag ＋ Au­clad Standard: Ag ＋ Au­clad Standard 2 A   30 V DC 2 A   30 V DC 1 A   30 V DC 10 µA 10 mV DC Latching types availability Rated coil voltage 7.4 15 8.4 ATX2 •2  , 000 V rms dielectric strength • 2 Form C and 2 A relays Contact arrangement Contact data 8.2 7.4 15 8.4 Initial of part number Features 7.4 15 8.2 8.2 Type of relay ( Height includes standoff unit: mm ) TX­S RELAYS 7.4 10 µA 10 mV DC 10 µA 10 mV DC ● ● ● 1.5, 3, 4.5, 5, 6, 9, 12, 24, 48 V DC ( 48 V ; Only single side stable type ) 1.5, 2.4, 3, 4.5, 5, 6, 9, 12, 24, 48 V DC ( 48 V; Only single side stable type, 2.4 V; Only latching type ) 1.5, 3, 4.5, 6, 9, 12, 24 V DC Single side stable: 140 mW ( 1.5 to 24 V DC ), 270 mW ( 48 V DC ) Latching type: 200 mW ( 1.5 to 24 V DC ) Single side stable: 140 mW ( 1.5 to 24 V DC ), 270 mW ( 48 V DC ) Latching type: 140 mW ( 1.5 to 24 V DC ) Single side stable: 50 mW ( 1.5 to 12V DC ), 70 mW ( 24 V DC ) Latching type: 70 mW ( 1.5 to 12V DC ), 150 mW ( 24 V DC ) Operate [ Set ] voltage ( initial ) Max. 75% V Max. 75% V Max. 80% V Release [ Reset ] voltage ( initial ) Min. 10% V [ Max. 75% V ] Min. 10% V [ Max. 75% V ] Min. 10% V [ Max. 80% V ] Time characteristics ( initial ) Operate [ Set ] time ( initial ) Max. 4 ms Max. 4 ms Max. 5 ms Release [ Reset ] time ( initial ) Max. 4 ms Max. 4 ms Max. 5 ms Expected life Mechanical life ( ope. ) Min. 100 × 106 Min. 100 × 106 Min. 50 × 106 Dielectric strength ( initial ) Between open contacts 1,000 Vrms for 1 min 1,000 Vrms for 1 min   750 Vrms for 1 min Between contact and coil 2,000 Vrms for 1 min 2,000 Vrms for 1 min 1,800 Vrms for 1 min Between contact sets 1,000 Vrms for 1 min 1,000 Vrms for 1 min 1,000 Vrms for 1 min Between open contacts 1,500 V 10 × 160 µs ( FCC Part 68 ) 1,500 V 10 × 160 µs ( FCC Part 68 ) 1,500 V 10 × 160 µs ( FCC Part 68 ) 2,500 V 2 × 10 µs 2,500 V 2 × 10 µs 2,500 V 2 × 10 µs －40 to ＋85 ℃ ( 1.5 to 24 V DC ) / －40 to ＋70 ℃ ( 48 V DC ) －40 to ＋85 ℃ ( 1.5 to 24 V DC ) / －40 to ＋70 ℃ ( 48 V DC ) －40 to ＋70 ℃ Dust cover − − − Flux­resistant − − − Sealed ● ● φ1 2.54 φ1 φ1 PC board terminal 5.08 2.54 2.54 PC board terminal 5.08 2.54 2.54 1 1 3.16 3.16 1 2.54 5.08 5.08 2.54 PC board terminal 5.08 2.54 2.54 7.24 PC board pattern ( BOTTOM VIEW ) ● indicates input terminal 2.54 5.08 5.08 2.54 ● 5.08 2.54 3.16 Protective construction 7.24 Ambient temperature 5.08 Between contact and coil 7.24 Surge withstand voltage ( initial ) Surface-mount terminal SA type Single side stable （TOP VIEW） Surface-mount terminal SA type Single side stable （TOP VIEW） Surface-mount terminal SA type Single side stable （TOP VIEW） UL/C­UL, BSI UL/C­UL, BSI UL/C­UL, BSI 2g 2g 2g Option − − − Remarks − − − Safety standards Unit weight ( Approx. ) Panasonic Industry Co., Ltd. Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー 22 ー Panasonic Industry Co., Ltd. 2023 ASCTB39E 202304 Signal Relays ( 2 A or less ) selector chart Category Signal Relays ( 2 A or less ) Product name TX­D RELAYS TQ RELAYS* 15 Type of relay ( Height includes standoff unit: mm ) 7.4 15 ATXD2 •6  ,000 V Surge withstand voltage type • 2 Form A, 2 A and High dielectric strength type relays Features Contact arrangement 4 3 2 1 • 5.6 mm Low profile •2  Form C 2 A Surface­mount type relays 2 Form C 2 Form C Crossbar Twin Standard: Ag ＋ Au­clad Ag ＋ Au­clad AgNi ＋ Au­clad 2 A   30 V DC 2 A   30 V DC 1 A   30 V DC 10 µA 10 mV DC Latching types availability Coil data • 5 mm Low profile • 2 Form C, 1 A type relays ATQ Crossbar Twin Min. switching load ( reference value ) Rated operating power ATQ 2 Form C A A A A Rated coil voltage 5.6 Crossbar Twin Contact shape Contact material 9 14 5 8.4 Initial of part number Contact rating ( resistive ) 9 14 8.2 Contact data TQ RELAYS ( SMD ) 7.4 10 µA 10 mV DC 10 µA 10 mV DC ● ● ● 1.5, 3, 4.5, 6, 9, 12, 24 V DC 3, 4.5, 5, 6, 9, 12, 24, 48 V DC ( 48 V ; Only single side stable type ) 1.5, 3, 4.5, 5, 6, 9, 12, 24, 48 V DC ( 48 V; Only single side stable type ) 2 Form C Single side stable: 200 mW ( 1.5 to 12 V DC ), 230 mW ( 24 V DC ) 2 Form C Latching type: 150 mW ( 1.5 to 12 V DC ), 170 mW ( 24 V DC ) 2 Form C Single side stable: 140 mW ( 3 to 12 V DC ) 200 mW ( 24 V DC ), 300 mW ( 48 V DC ) Single side stable: 140 mW ( 1.5 to 12 V DC ) 200 mW ( 24 V DC ), 300 mW ( 48 V DC ) Operate [ Set ] voltage ( initial ) Max. 75% V Max. 75% V Max. 75% V Release [ Reset ] voltage ( initial ) Min. 10% V [ Max. 75% V ] Min. 10% V [ Max. 75% V ] Min. 10% V [ Max. 75% V ] Time characteristics ( initial ) Operate [ Set ] time ( initial ) Max. 4 ms Max. 3 ms Max. 4 ms Max. 4 ms Max. 3 ms Max. 4 ms Expected life Mechanical life ( ope. ) Min. 100 × 106 Min. 100 × 106 Min. 100 × 106 Dielectric strength ( initial ) Between open contacts 1,000 Vrms for 1 min   750 Vrms for 1 min 1,000 Vrms for 1 min Between contact and coil 3,000 Vrms for 1 min 1,000 Vrms for 1 min 1,500 Vrms for 1 min Between contact sets 1,000 Vrms for 1 min 1,000 Vrms for 1 min 1,500 Vrms for 1 min Between open contacts 1,500 V 10 × 160 µs ( FCC Part 68 ) 1,500 V 10 × 160 µs ( FCC Part 68 ) 1,500 V 10 × 160 µs ( FCC Part 68 ) Between contact and coil 6,000 V 1.2 × 50 µs − 2,500 V 2 × 10 µs －40 to ＋85℃ －40 to ＋70 ℃ －40 to ＋85 ℃ ( 1 A or less for use over 70 ℃ ) Dust cover − − − Flux­resistant − − − Sealed ● ● ● 2.54 5.08 5.08 2.54 2.54 PC board terminal 5.08 2.54 2.54 7.24 PC board pattern ( BOTTOM VIEW ) ● indicates input terminal 2.54 10.16 1 φ1 PC board terminal Surface-mount terminal SA type Single side stable （TOP VIEW） Safety standards 1 Surface-mount SA type （TOP VIEW） UL/C­UL, BSI UL/C­UL UL/C­UL 2g 1.5 g 2g − − − MBB contact available MBB contact available − Unit weight ( Approx. ) Option Remarks 10.16 2.94 φ1 7.62 Protective construction 9.56 Ambient temperature 3.16 Surge withstand voltage ( initial ) Release [ Reset ] time ( initial ) * Standard PC board terminal and self­clinching terminal. Panasonic Industry Co., Ltd. Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー 23 ー Panasonic Industry Co., Ltd. 2023 ASCTB39E 202304 Signal Relays ( 2 A or less ) selector chart Category Signal Relays ( 2 A or less ) Product name DS RELAYS 9.9 15 Type of relay ( Height includes standoff unit: mm ) 9.9 AG2 Initial of part number • High sensitivity 200 mW type • 1 Form C, 2 A type relays Features Contact arrangement 1 Form C Contact shape Twin Contact material Contact data Contact rating ( resistive ) Ag ＋ Au­clad 4 3 2 1 A A A A Min. switching load ( reference value ) 2 A   30 V DC 10 µA 10 mV DC Latching types availability Rated coil voltage Rated operating power Coil data Time characteristics ( initial ) Expected life Dielectric strength ( initial ) Surge withstand voltage ( initial ) Single side stable: 400 mW ( Standard ), 200 mW ( High sensitivity ) Latching type: 360 mW ( Standard ), 180 mW ( High sensitivity ) Operate [ Set ] voltage ( initial ) Max. 70% V, Max. 80% V ( High sensitivity ) Release [ Reset ] voltage ( initial ) Min. 10% V [ Max. 70% V , Max. 80% V ( High sensitivity ) ] Operate [ Set ] time ( initial ) Max. 10 ms Release [ Reset ] time ( initial ) Max. 5 ms [ Max. 10 ms ] Mechanical life ( ope. ) Min. 100 × 106 ( Single side stable ), Min.   10 × 106 ( 2 coil latching ) Between open contacts 1,000 Vrms for 1 min ( Standard ),   500 Vrms for 1 min ( High sensitivity ) Between contact and coil 1,500 Vrms for 1 min ( Standard ), 1,000 Vrms for 1min ( High sensitivity ) Between contact sets − Between open contacts − Between contact and coil − Ambient temperature Protective construction ● 1.5, 3, 5, 6, 9, 12, 24, 48 V DC －40 to ＋70 ℃ Dust cover − Flux­resistant − Sealed ● 5.08 7.62 PC board pattern ( BOTTOM VIEW ) ● indicates input terminal 7.62 2.54 φ0.9 PC board terminal Single side stable Safety standards Unit weight ( Approx. ) UL, CSA 3g Option − Remarks − Panasonic Industry Co., Ltd. Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー 24 ー Panasonic Industry Co., Ltd. 2023 ASCTB39E 202304 Microwave Devices Selector Chart Category Microwave Devices Product name RA RELAYS Type of relay (Height includes standoff unit = mm) RJ RELAYS 9.0 14.0 8.2 14.0 9.7 14.7 5.9 Contact data 8.2 8.0 ARJ ARS 8 GHz max. capable, 1 W carrying power ( at 5 GHz ), 50 Ω impedance and 2 Form C relays 3 GHz capable, 10 W carrying power ( at 3 GHz ), 50 W/75 Ω impedance and 1 Form C relays 1 Form C 2 Form C 2 Form C Ag alloy / Au­clad Ag alloy Au Au 3 W ( at 1 GHz ) 1 W ( at 5 GHz ) 10 W ( at 3 GHz ) ● ● ● 1.5, 3, 4.5, 5, 6, 9, 12, 24, 48 V DC ( 48 V: Only single side stable ) 3, 4.5, 12, 24 V DC 3, 4.5, 9, 12, 24 V DC Contact material Contact input power Latching types availability Coil data 8.6 14.0 7.2 1 GHz capable, 3 W carrying power ( at 1 GHz ), 50 Ω impedance and 2 Form C relays Contact arrangement Rated coil voltage 8.6 14.0 9.0 ARA Initial of part number Features RS RELAYS 140 mW ( 1.5 to 12 V ) 200 mW ( 24 V ) 300 mW ( 48 V ) Rated operating power ( Single ) 200 mW ( –L ) 200 mW ( –L2 ) 400 mW ( Single ) 200 mW ( –L2 ) 150 mW Max. 75 % V Max. 75 % V Max. 75 % V Release [ Reset ] voltage ( initial ) Min. 10 % V Min. 10 % V Min. 10 % V Operate [ Set ] time ( initial ) Max. 4 ms ( about 2 ms ) Max. 5 ms Max. 10 ms Release [ Reset ] time ( initial ) Max. 4 ms ( about 1 ms ) Max. 5 ms Max. 6 ms Min. 100×106 Min. 10×106 Min. 5×106 Min. 10×106 Min. 106 Between open contacts 750 V rms for 1 min 500 V rms for 1 min 500 V rms for 1 min Between contact and coil 1,000 V rms for 1 min 500 V rms for 1 min 1,000 V rms for 1 min ­40 to +85 ℃ ­30 to +70 ℃ ­40 to +70 ℃ ­40 to +60 ℃ ( silent ) Dust cover ­ ­ ­ Flux­resistant ­ ­ ­ Sealed ● ● ● 5.9 8.2 8 14.7 14.0 0.3 8.6 9.00 12.10 1.70 : Relay terminals : Ground. Note that soldering is required. : Ground. Note that you must determine the necessity of solder based on effect of heat when soldering. : Ground. Note that some extra work is required due to the effect of lifting when soldering. : Earth for metal case 13.46 10.16 6.86 3.30 1.50 6­1.10 8­0.80 11.70 1.10 8.20 0.90 12.40 14.90 Safety standards 0.90 1.50 0.80 For glue­pad 2.00 11.40 10.40 8.89 6.40 7.02 2.0 2.54 50 Ω type E layout 13.50 3.30 1.50 PC board pattern ( TOP VIEW ) ■ indicates input terminal 14.0 8.90 9.56 12.50 2.94 1.70 1.50 1.0 14.0 75 Ω type E layout 13.46 10.16 6.86 9­0.80 1.27 3.30 11.70 1.95 Bottom ( mm ) 1.95 Height ( Height includes standoff unit = mm ) 9.7 Dimensions Protective construction Ambient temperature Min. 300×103 ( 75 Ω ) Min. 106 ( 50 Ω ) 1.30 Electrical life 2.00 3.81 Mechanical life 9.0 Surge withstand Expected life voltage ( initial ) Operate [ Set ] voltage ( initial ) 3­1.00 2­0.90 3.20 1.27 ­ ­ ­ 2g 3g 2g Option ­ ­ ­ Remarks ­ ­ Reverse contact type available. Unit weight ( Approx. ) Panasonic Industry Co., Ltd. Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー 25 ー Panasonic Industry Co., Ltd. 2023 ASCTB281E 202304 Microwave Devices Selector Chart Category Microwave Devices Product name Type of relay (Height includes standoff unit = mm) RN RELAYS RD COAXIAL SWITCHES 9.6 14.6 10.0 ARN Initial of part number 8 GHz max. capable, 150 W carrying power ( at 2 GHz ), compact SMD type, 50 Ω impedance and 1 Form C relays Contact data Features Contact arrangement SPDT, Transfer, SP6T Au Au Max. 150 W ( at 2 GHz ) Max. 120 W ( at 3 GHz ) Latching types availability Coil data 26.5 GHz max. coaxial switches coming in SPDT, Transfer, and SP6T types 1 Form C Contact material Contact input power ARD ● ● Rated coil voltage 4.5, 12, 24 V DC 4.5, 5, 12, 24 V DC ( 4.5 V: Excepting Latching with TTL driver , 5 V: Latching with TTL driver ) Rated operating power ( Single ) 320 mW ( –L2 ) 400 mW ( SPDT, SP6T ) 840 mW ( Transfer ) 1,540 mW Operate [ Set ] voltage ( initial ) Max. 75 % V ­ Release [ Reset ] voltage ( initial ) Min. 10 % V ­ Max. 15 ms ( SPDT ) Max. 20 ms ( Transfer, SP6T ) Max. 5 ms Release [ Reset ] time ( initial ) Max. 5 ms ­ Mechanical life Min. 10 Min. 5 × 106 Electrical life Min. 103 Min. 5 × 106 ( SPDT ) Between open contacts 500 V rms for 1 min 500 V rms for 1 min Between contact and coil 500 V rms for 1 min 500 V rms for 1 min 6 ­40 to +85 ℃ ­55 to +85 ℃ Dust cover ­ ­ Flux­resistant ● ­ Sealed ­ ­ 10 ­ Height ( Height includes standoff unit = mm ) 14.6 Safety standards Unit weight ( Approx. ) Option Remarks 14.90 5.00 11­1.60 3.17 2.90 9.90 5.00 PC board pattern ( TOP VIEW ) ■ indicates input terminal ­ 9.6 Bottom ( mm ) 2． 90 Dimensions Protective construction Ambient temperature 9.64 Surge withstand voltage ( initial ) Expected life Operate [ Set ] time ( initial ) 8.89 ­ 4­0.80 ­ ­ 2.5 g ­ ­ ­ Reverse contact type available. ­ Panasonic Industry Co., Ltd. Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー 26 ー Panasonic Industry Co., Ltd. 2023 ASCTB281E 202304 Safety Relays Selector Chart Category Safety Relays Product name SF­M RELAYS Type of relay ( Height includes standoff unit = mm ) SF RELAYS Slim type 13 40 14.0 33.0 SF­Y RELAYS 13 50 28.6 14.5 24 24 7.8 31 28.6 39 14.5 ASFM0 Initial of part number Features Slim type safety relays 1 Form A 1 Form B 4 poles: 2 Form A 2 Form B, 3 Form A 1 Form B 6 poles: 4 Form A 2 Form B, 5 Form A 1 Form B, 3 Form A 3 Form B 4 poles: 2 Form A 2 Form B, 3 Form A 1 Form B 6 poles: 4 Form A 2 Form B, 5 Form A 1 Form B Single Single Single RTⅡ: Au flashed AgNi type RTⅢ: Au flashed AgSnO2 type Au flashed AgSnO2 type Au flashed AgNi type N.O. contact 6 A 250 V AC 6 A 30 V DC 6 A 250 V AC 6 A 30 V DC 6 A 250 V AC 6 A 30 V DC 1 mA 10 V DC 1 mA 5 V DC 10 mA 10 V DC 30 20 15 10 8 5 3 A A A A A A A Minimum ( For Reference ) N.C. contact 4 A 250 V AC 4 A 30 V DC 1 mA 10 V DC ­ ­ ­ Nominal coil voltage 3, 5, 12, 16, 18, 21, 24 V DC 12, 24, 48 V DC 5, 12, 16, 18, 21, 24 V DC Rated operating power 270 mW ( When input ) 100 mW ( When retained ) 670 mW Max. 75 % Max. 75 ％ V Max. 75 ％ V Release [ Reset ] voltage ( initial ) Min. 10 % V Min. 10 ％ V Min. 15 ％ V Operate [ Set ] time ( initial ) Max. 15 ms Max. 20 ms Max. 20 ms Release [ Reset ] time ( initial ) Max. 10 ms Max. 20 ms Max. 10 ms Mechanical life ( ope. ) Min. 10×10 Min. 10×10 Min. 10×106 Between open contacts 1,500 Vrms for 1 min 1,500 Vrms for 1 min 1,500 Vrms for 1 min Between contact and coil NC contact ( 3­4 terminal ) ­ coil; NO contact ( 5­6 terminal ) ­ coil; 2,500 Vrms for 1 min 4,000 Vrms for 1 min 4,000 Vrms for 1 min NC contact ( 5­6 terminal ) ­ coil; NO contact ( 7­8 terminal ) ­ coil; 2,500 Vrms for 1 min 4,000 Vrms for 1 min ­ ­ ­ ­40 to +85 ℃ ­40 to +85 ℃ ­40 to +70 ℃ ­ ­ ­ Flux­resistant ● ( RTⅡ ) ● ­ Sealed ● ( RTⅢ ) ­ ● ( RTⅢ ) *1 7.8 24 Dust cover height ( mm ) Including Standoff 6 50 ( 6 poles ) 33 40 ( 4 poles ) 14 Bottom ( mm ) 14.5 31 39 28.6 6 Ambient temperature Protective construction 500 mW Operate [ Set ] voltage ( initial ) Surgewithstandvoltage ( initial ) Between contact and coil External dimension 360 mW 28.6 Dielectric strength Expected Time life characteristics ( initial ) Coil data Latching types availability 13 Contactdata Contact shape Contact rating chart Maximum ( cos φ= 1 ) AG1Y0 AG1S Compact Relay Family with Forcibly Guided Contacts Contact arrangement Contact material 6 poles 4 poles Flat type safety relays ( 1 Form A 1Form B ) 11.43 5.08 5.08 6 poles Safety standards UL/C­UL, TÜV 5.08 5.08 20 g 23 g 4.3 4 poles UL/C­UL, Korean S, TÜV, CQC 6.5 g 6.25 10.5 6.25 7.6 14 ‒φ1.6 4.3 10.65 5.15 4.3 14‒φ1.4 7.6 4.3 13.97 (1.83) Unit weight (Approx.) 5.08 6.25 10.5 6.25 10‒φ1.6 4 poles 6­φ1.2 10.16 12.0 13.7 11.43 5.08 10.65 5.15 4.3 28.0 6.25 4.1 Suggested PC board pattern ( BOTTOM VIEW ) ●: coil terminal 13.97 (1.83) 4.3 10.16 10‒φ1.4 6 poles UL/C­UL, TÜV 19 g 23 g Option ­ Sockets, DIN rail terminal socket ­ Remarks ­ With LED indication type available ­ *1: According to EN 61810­1:2015, table 2 Panasonic Industry Co., Ltd. Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー 27 ー Panasonic Industry Co., Ltd. 2023 ASCTB274E 202304 Safety Relays Selector Chart Category Safety Relays Product name SF RELAYS Type of relay ( Height includes standoff unit = mm ) SF RELAYS Double Contact Type 25 53.3 25 53.3 16.5 16.5 Features 3 Form A 1 Form B Contactdata Contact shape Contact material 30 20 15 10 8 5 3 16.5 4 Form A 4 Form B AG10 Flat type safety relays ( double contact ) Flat type safety relays Contact arrangement Contact rating chart Maximum ( cos φ= 1 ) 2 Form A 2 Form B AG103 Initial of part number 33 53.3 2 Form A 2 Form B 4 Form A 4 Form B Single Double Contact Au flashed AgSnO2 type Au flashed AgSnO2 type A A A A A A A 100 mA 5 V DC 100 mA 5 V DC ­ ­ 5, 12, 24, 48, 60 V DC 5, 12, 24, 48, 60 V DC 500 mW 500 mW Operate [ Set ] voltage ( initial ) Max. 80 % V Max. 75 % V Release [ Reset ] voltage ( initial ) Min. 10 % V Min. 10 % V Expected Time life characteristics 6 A 250 V AC 6 A 30 V DC Operate [ Set ] time ( initial ) Max. 30 ms Max. 30 ms Release [ Reset ] time ( initial ) Max. 15 ms Max. 15 ms Mechanical life ( ope. ) Min. 10×106 Min. 10×106 Dielectric strength ( initial ) Minimum ( For Reference ) 6 A 250 V AC 6 A 30 V DC Latching types availability Between open contacts 2,500 Vrms for 1 min 1,300 Vrms for 1 min Between contact and coil 2,500 Vrms for 1 min 2,500 Vrms for 1 min ­ ­ ­40 to +70 ℃ ­40 to +70 ℃ ­ ­ Rated operating power Surgewithstandvoltage ( initial ) Between contact and coil Dust cover Flux­resistant ­ ­ Sealed ● ● 16.5 16.5 53.3 53.3 Bottom ( mm ) 25 ( 2 Form A 2 Form B ) height ( mm ) Including Standoff 25 External dimension Protective construction Ambient temperature 33 ( 4 Form A 4 Form B) Coil data Nominal coil voltage 10­φ1.4 holes 2.54 2.54 2 Form A 2 Form B 2.54 18­φ1.4 holes 2.54 Suggested PC board pattern ( BOTTOM VIEW ) ●: coil terminal 10­φ1.4 holes 2.54 2.54 3 Form A 1 Form B 4 Form A 4 Form B Safety standards Unit weight (Approx.) UL/C­UL, TÜV UL/C­UL, TÜV 38 g 38 g 47 g Option ­ ­ Remarks ­ ­ Panasonic Industry Co., Ltd. Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー 28 ー Panasonic Industry Co., Ltd. 2023 ASCTB274E 202304 Characteristics ■ UL Coil Insulation Coil Insulation Relay UL­B LQ, LZ, LZ­N, JW UL­F LD­P, LF­G, LQ, LZ, LZ­N,HE,HE­PV, HE­N , HE­S, HE­V ■ TV rated TV rated Relay TV­2 ­ TV­3 ST, LQ ( 1 Form A ) * TV­4 ­ TV­5 LZ, LZ­N, JW TV­8 DW ( Inrush type ), LF, HE­S ( STD type N.O. ) TV­10 HE ( 2 Form A ), HE­S ( Long life type N.O. ) TV­15 HE ( 1 Form A ), HE­PV ( 35 A ) * For TV­3 type, please contact our sales representative for details. ■ Surge voltage between contact and coil Surge voltage Relay 5,000 V DS­P 6,000 V ST, PF, LF­G, PA­N 8,000 V LQ 10,000 V LF, LD­P,LZ, LZ­N, JW, HE, HE­PV, HE­N, HE­S, HE­V, DJ, DK, DY, HE­R 12,000 V DE, DW ■ High frequency characteristics Relay Arrangement RD COAXIAL SWITCH SPDT Transfer SP6T Min. 80 dB ( 1 to 4 GHz ) SPDT Min. 60 dB ( 12.4 to 18 GHz ) Transfer Min. 80 dB ( 1 to 4 GHz ) SP6T Isolation Max. 0.2 dB ( 1 to 4 GHz ) SPDT Max. 0.5 dB ( 12.4 to 18 GHz ) Transfer Max. 0.2 dB ( 1 to 4 GHz ) SP6T Insertion loss RN RELAY 1 Form C Min. 30 dB ( 3 to 6 GHz ) Max. 0.5 dB ( 3 to 6 GHz ) RJ RELAY 2 Form C Min. 30 dB ( 5 GHz ) ( Between contact sets ) Max. 0.5 dB ( 5 GHz ) RA RELAY 2 Form C Min. 30 dB ( 1 GHz ) ( Between contact sets ) Max. 0.3 dB ( 1 GHz ) RS RELAY 1 Form C Min. 30 dB ( 3 GHz ) 50 Ω Surface­mount terminal Max. 0.5 dB ( 3 GHz ) 50 Ω Surface­mount terminal Min. 35 dB ( 3 GHz ) 75 Ω PC board terminal Max. 0.35 dB ( 3 GHz ) 75 Ω PC board terminal ■ Terminal socket SP, NC, HE, SFS ■ Socket S, ST, NC, PA­N,DK, DS­P, JW, SFS ■ LED operation indication type SFS SAFETY STANDARDS Each standard may be updated at any time, so please check our Website for the latest information. https://www3.panasonic.biz/ac/e/service/export/information/standards/relay/index.jsp?c=search Panasonic Industry Co., Ltd. Electromechanical Control Business Division industrial.panasonic.com/ac/e/ ー 29 ー Panasonic Industry Co., Ltd. 2023 ASCTB443E 202304 Please refer to "the latest product specifications" when designing your product. •Requests to customers: https://industrial.panasonic.com/ac/e/salespolicies/ ■Global Sales Network Information: industrial.panasonic.com/ac/e/salesnetwork Electromechanical Control Business Division 1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8506, Japan industrial.panasonic.com/ac/e/ ©Panasonic Industry Co., Ltd. 2023 Specifications are subject to change without notice. ASCTB444E 202304 2023.4