JVN1AF-5V-F

JV-N COMPACT FLAT POWER RELAY FOR HEATER LOADS 22 .866 JV-N RELAYS FEATURES 16 .630 10.9 .429 • High 16 A capacity The contacts are high capacity 16A, 125 V AC. • Compact, flat type with low 10.9 mm .429 inch height Compact flat type with low surface area of 16  22 mm .630  .866 inch and height of 10.9 mm .429 inch. • High sensitivity at 200 mW High sensitivity at 200 mW coil power consumption. • Represses contact terminal heat The contact terminals are larger and thicker compared to the existing JV relay. This limits the rise in temperature of the terminals when there is a large current flowing to approx. 28C 62°F (normal current of 16 A). • Conforms to the various safety standards UL/CSA, TÜV approved. COMMENTS ABOUT Cd FREE We have introduced Cadmium free type products to reduce the material which is not good for our environment. (The suffix “F” should be added to the part number.) If you are still using Cadmium containing parts, which don’t have “F” on the suffix of the part number, please use Cadmium free parts from now on. The life of the Cadmium free parts may be shorter than the Cadmium containing parts based on the load condition, so please evaluate the Cadmium free parts with your actual application before use. SPECIFICATIONS Contact Characteristics Arrangement Initial contact resistance, max. (By voltage drop 6 V DC 1 A) Contact material Nominal switching capacity Rating (resistive load) Max. switching power Max. switching voltage Max. switching current Min. switching capacity#1 Expected life (min. ope.) Mechanical (at 180 cpm) Sealed type Electrical 16 A 125 V AC, at resistive 10 A 30 V DC load (at 20 cpm) Flux-resistant type 10 A 125 V AC 1 Form A Max. 100 m AgSnO2 type 16 A 125 V AC, 10 A 277 V AC 10 A 30 V DC, 10 A 125 V AC 2,770 VA, 300 W 277 V AC, 30 V DC 16 A (AC 125 V), 10 A (DC) 100 mA, 5 V DC 2107 Max. operating speed Operate time* (at nominal voltage) 1 Release time*2 (at nominal voltage) Initial insulation resistance Initial breakdown Between open contacts voltage (Detection Between contacts current: 10 mA and coil Surge voltage between contact and coil Temperature rise 105 3105 Conditions in case of operation, transport and storage*8 Coil Nominal operating power 200 mW (DC 4.5 to 48 V) 600 mW (DC 100 V) #1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. Remarks * Specifications will vary with foreign standards certification ratings. *1 Excluding contact bounce time *2 Excluding contact bounce time, without diode *3 By resistive method; nominal voltage applied to the coil; contact carrying current: 16A, at 70C 158F *4 Nominal voltage applied to the coil, at 60C 140F *5 Half-wave pulse of sine wave: 11 ms; detection time: 10 s *6 Half-wave pulse of sine wave: 6 ms *7 Detection time: 10 s *8 Refer to “6. Usage, Storage and Transport Conditions“ in AMBIENT ENVIRONMENT section in Relay Technical Information. ds_61B07_en_jvn: 010611J Shock resistance Vibration resistance Unit weight Functional Destructive Functional Destructive 20 cpm Max. 12 ms (DC 4.5 V to 48 V) Max. 8 ms (DC 100 V) Max. 5 ms Min. 1,000 M (at 500 V DC) 1,000 Vrms for 1 min. 2,500 Vrms for 1 min. Min. 4,500 V Max. 45C (DC 4.5 V to 48 V) *3 Max. 55C (DC 100 V)*4 Ambient temperature –40 to 70C –40 to 158F (DC 4.5 to 48 V) –40 to 60C –40 to 140F (DC 100V) Humidity: 5 to 85 % R.H. (Note freezing and condensing at low temperature) Air pressure: 86 to 106 kPa Min. 200 m/s2{20G}*5 Min. 1,000 m/s2{100G}*6 10 to 55 Hz *7 at double amplitude of 1.6 mm 10 to 55 Hz at double amplitude of 2 mm Approx. 8g .28 oz 1 JV-N TYPICAL APPLICATIONS ORDERING INFORMATIONS • AV equipment: TV’s, VTR’s, etc. • OA equipment • HA equipment 1a Ex. JVN F 4.5 V F Contact arrangement Protective construction Coil voltage (DC) Contact material 1a: 1 Form A Nil: Sealed type F: Flux-resistant type 4.5, 6, 9, 12,18, 24, 48, 100 V F: AgSnO2 type UL/CSA, TÜV approved type is standard. Please inquire about the previous products (Cadmium containing parts). TYPES AND COIL DATA (at 20C 68F) Part No. Sealed type JVN1a-4.5V-F JVN1a-6V-F JVN1a-9V-F JVN1a-12V-F JVN1a-18V-F JVN1a-24V-F JVN1a-48V-F JVN1a-100V-F Flux-resistant type Nominal voltage, V DC Pick-up voltage V DC (max.) Drop-out voltage V DC (min.) Coil resistance, W (10%) JVN1aF-4.5V-F JVN1aF-6V-F JVN1aF-9V-F JVN1aF-12V-F JVN1aF-18V-F JVN1aF-24V-F JVN1aF-48V-F JVN1aF-100V-F 4.5 6 9 12 18 24 48 100 3.375 4.5 6.75 9 13.5 18 36 60 0.23 0.3 0.45 0.6 0.9 1.2 2.4 4 101 180 405 720 1,620 2,880 11,520 16,600 DIMENSIONS(mm inch) Nominal operating current, mA (10%) 44.4 33.3 22.2 16.7 11.1 8.3 4.2 6 Nominal operating power, mW 200 200 200 200 200 200 200 600 Max. allowable voltage, V DC 6.75 9 13.5 18 27 36 72 110 CAD Data Data from our Web site. Download CAD CAD Data 22 .866 16 .630 PC board pattern 4 .157 12.7 .500 1.0 .039 0.5 .020 1.6 .063 2-0.9 dia. 2-.035 dia. 17.78 .700 0.4 10.5 .016 .413 COM 17.78 .700 NO (R) (R) 2.0 .079 12.7 .500 10.16 .400 Dimension: General tolerance Max. 1mm .039 inch: 0.2 .008 1 to 5mm .039 to .197 inch: 0.3 .012 Min. 5mm .197 inch: 0.4 .016 10.16 .400 2.0 .079 REFERENCE DATA 1. Max. switching power Sample: JVN1aF-12 V-F, 6 pcs. point measured: coil inside Contact current: 16 A AC resistive load 1 9 8 7 operate time 6 5 Max. — x Min. 4 3 release time 2 1 10 100 Contact voltage, V 2 1,000 0 80 100 120 140 Max. — x Min. 160 Coil applied voltage, %V Temperature rise, °C operate & release time, ms Contact current, A 3. Coil temperature rise Sample: JVN1aF-12 V-F, 6 pcs. 10 100 16 10 2. Operate/release time 50 40 Ambient temperature 30°C 30 Ambient temperature 70°C 20 10 0 80 100 120 140 160 Coil applied voltage, %V ds_61B07_en_jvn: 010611J JV-N 4. Ambient temperature characteristics 5. Life curve Sample: JVN1aF-12 V-F, 6 pcs. Operation frequency: 20 times/min. Ambient temperature: room temperature -40 -20 0 100 Drop-out voltage 10 Pick-up voltage 20 40 60 80 Ambient temperature, °C 125V AC resistive load Life, ×104 Variation ratio, % 20 10 277V AC resistive load -10 -20 1 4 6 8 10 12 14 16 18 Contact current, A SAFETY STANDARDS File No. E43028 UL/C-UL (Recognized) Contact rating 16A 125V AC, 16A 277V AC, 10A 30V DC 0.3A 110V DC, 1/10HP 125V AC, 1/10HP 277V AC File No. LR26550 CSA (Certified) Contact rating 16A 125V AC, 16A 277V AC, 10A 30V DC 0.3A 110V DC, 1/10HP 125V AC, 1/10HP 277V AC TÜV (Certified) File No. Rating B 08 07 16A 250V AC (cos=0.4) 13461 250 10A 30V DC (0ms) For Cautions for Use, see Relay Technical Information. ds_61B07_en_jvn: 010611J 3