LA-511

1129 FIBER SENSORS Laser Collimated Beam Sensor LA SERIES Related Information ■■General terms and conditions.............. F-3 ■■About laser beam........................ P.1593~ ■■Selection guide............................ P.1021~ ■■General precautions...................... P.1595 LASER SENSORS PHOTOELECTRIC SENSORS Conforming to FDA regulations MICRO PHOTOELECTRIC SENSORS (LA-511 only) AREA SENSORS SAFETY LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS LA-510 is classified as a Class 1 Laser Product in IEC / JIS standards. LA-511 is a Class I Laser Product in FDA regulations. Do not look at the laser beam through optical system such as a lens. SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS panasonic.net/id/pidsx/global MEASUREMENT SENSORS STATIC CONTROL DEVICES LASER MARKERS PLC HUMAN MACHINE INTERFACES ENERGY MANAGEMENT SOLUTIONS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS Selection Guide Laser Displacement Magnetic Displacement Contact Displacement Collimated Beam Sensors Metal-sheet Double-feed Detection Digital Panel Controller Other Products HL-T1 LD LA “Class 1” laser beam sensor safe for your eyes BASIC PERFORMANCE FUNCTIONS Safety countermeasures not required LA-510 Easy laser beam alignment This laser collimated beam sensor conforms to the Class 1 laser stipulated in IEC 60825-1 and JIS C 6802. Hence, safety measures such as protective gear are not necessary. Four monitoring LEDs help you to easily align the emitter and the receiver. Receiver front face Precise sensing in wide area “DOWN” lights up Sensing area: 15 × 500 mm 0.591 × 19.685 in Minimum sensing object: ø0.1 mm ø0.004 in Repeatability: 10 µm 0.394 mil or less Emitter Sensing range 500 mm 19.685 in “LEFT” lights up Receiver “RIGHT” lights up “UP” lights up Sensing width 15 mm 0.591 in Minimum sensing object ø0.1 mm ø0.004 in VARIETIES FDA Class I type The monitoring system checks whether the incident beam falls evenly on all the four receiving elements in the receiver window. OPTIONS LA-511 LA-511 conforms to FDA Class I. It is approved for use in U.S.A. by FDA. Versatile mounting The side view attachment (optional) enables versatile mounting styles. Side view attachment Laser Collimated Beam Sensor LA SERIES 1130 APPLICATIONS FIBER SENSORS Accurate positioning of orientation flat Counting number of O-rings Positioning gear on polishing machine LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS Gear Defective OK Chuck Defective SAFETY LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS ORDER GUIDE SENSOR OPTIONS Laser collimated beam sensors Type SIMPLE WIRE-SAVING UNITS Appearance Model No. Class 1 type Sensing range: 500 mm 19.685 in LA-510 Minimum sensing object: ø0.1 mm ø0.004 in Repeatability: 10 μm 0.394 mil or less Sensing width: 15 mm 0.591 in Emitting element: Infrared semiconductor laser diode (Class 1) Conforming standards / regulations Output MEASUREMENT SENSORS IEC and JIS standards NPN open-collector transistor (Comparative output) Analog voltage • Output voltage: 1 to 5 V LA-511 WIRE-SAVING SYSTEMS FDA regulations STATIC CONTROL DEVICES LASER MARKERS PLC Note: The model No. with “P” shown on the label affixed to the product is the emitter, “D” shown on the label is the receiver. HUMAN MACHINE INTERFACES ENERGY MANAGEMENT SOLUTIONS Accessory FA COMPONENTS • MS-LA1 (Sensor mounting bracket) MACHINE VISION SYSTEMS UV CURING SYSTEMS Set of two L-shaped brackets and four M4 (length 8 mm 0.315 in) screws with washers. Note: 2 sets are required to mount the emitter and the receiver. Selection Guide Laser Displacement OPTIONS Designation Side view attachment (Note 1) Digital panel controller (Note 2) Magnetic Displacement Model No. Description LA-SV1 Versatile mounting is possible as the laser beam can be bent at a right angle. • Sensing range: 500 mm 19.685 in • Minimum sensing object: ø0.1 mm ø0.004 in • Repeatability: 20 µm 0.787 mil or less CA2-T2 This is a very small controller which allows two independent threshold level settings. • Supply voltage: 24 V DC ±10 % • No. of inputs: 1 No. (sensor input) • Input range: 1 to 5 V DC • Output: NPN open-collector transistor • Main functions: Threshold level setting function, zero-adjust function, scale setting function, hysteresis setting function, start/hold function, autoreference function, power supply ON-delay function, etc. Notes: 1) Mount LA-SV1 on either the emitter or the receiver. If it is mounted on both sides, the monitor LEDs may not light off perfectly. 2) Refer to p.1143~ the ultra-compact digital panel controller CA2 series. Side view attachment • LA-SV1 Contact Displacement Collimated Beam Sensors Metal-sheet Double-feed Detection Digital Panel Controller Other Products HL-T1 Two M3 (length 10 mm 0.394 in) screws with washers are attached. Digital panel controller • CA2-T2 LD LA 1131 Laser collimated beam sensors AREA SENSORS SAFETY LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS Conforming standards / regulations Min. sensing object Repeatability Selection Guide Laser Displacement Magnetic Displacement Contact Displacement Collimated Beam Sensors Metal-sheet Double-feed Detection Digital Panel Controller Other Products HL-T1 10 µm 0.394 mil or less 12 to 24 V DC ±10 %   Ripple P-P 10 % or less Current consumption Emitter: 35 mA or less, Receiver: 25 mA or less Comparative output NPN open-collector transistor • Maximum sink current: 100 mA • Applied voltage: 30 V DC or less (between comparative output and 0 V) • Residual voltage: 1 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current) Utilization category Response time Output operation Short-circuit protection Analog output Slew rate Temperature characteristics Indicators Remote interlock input Operation Laser emission warning Stable incident beam Laser beam alignment Threshold level Span Pollution degree Ambient temperature Ambient humidity DC-12 or DC-13 0.5 ms or less ON when the incident beam amount is less than the threshold level Incorporated Analog voltage • Output voltage: 1 V (Darkest) to 5 V (Lightest) • Output impedance: 75 Ω 8 V/ms or more Within ±0.1 % F.S./°C (with respect to sensing range at ambient temperature +20 °C +68 °F) Laser is emitted when it is connected to 0 V, but not emitted when connected to +V or kept open Red LED (lights up when the comparative output is ON) Red LED (lights up when laser is being emitted) Green LED (lights up under the stable light received condition) Yellow LED × 4 (light up when laser beam is misaligned) Adjustment of threshold level for the comparative output, 18-turn endless adjuster Adjustment of span for the analog voltage output, 18-turn endless adjuster 3 (Industrial environment) 0 to +50 °C +32 to +122 °F (No dew condensation allowed), Storage: –20 to +70 °C –4 to +158 °F 35 to 85 % RH, Storage: 35 to 85 % RH Ambient illuminance Incandescent light: 10,000 ℓx or less at the light-receiving face Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure Vibration resistance 10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each Shock resistance Emitting element Enclosure earthing Material 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each Infrared semiconductor laser diode (Maximum output: 1.7 mW, Peak emission wavelength: 780 nm 0.031 mil) Capacitor earth Enclosure: Die-cast zinc alloy, Top cover: PPO, Front protection cover: Glass Cable 0.2 mm2 5-core (emitter: 4-core) shielded cable, 3 m 9.843 ft long Cable extension (Note 2) Net weight LD LA ø0.1 mm ø0.004 in opaque object Supply voltage Adjusters UV CURING SYSTEMS LA-511 EMC Directive, RoHS Directive 15 mm 0.591 in Environmental resistance MACHINE VISION SYSTEMS LA-510 500 mm 19.685 in PLC FA COMPONENTS FDA regulations Sensing range STATIC CONTROL DEVICES ENERGY MANAGEMENT SOLUTIONS IEC and JIS standards Sensing width MEASUREMENT SENSORS HUMAN MACHINE INTERFACES Model No. Item CE marking directive compliance WIRE-SAVING SYSTEMS LASER MARKERS Class 1 type Type PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS LA SERIES SPECIFICATIONS FIBER SENSORS LASER SENSORS Laser Collimated Beam Sensor Accessories Extension up to total 50 m 164.042 ft is possible, for both emitter and receiver, with 0.3 mm2, or more, cable. (Synchronization wire cannot be extended.) Emitter: 290 g approx., Receiver: 280 g approx. MS-LA1 (Sensor mounting bracket): 1 set for emitter and receiver Adjusting screwdriver: 1 pc. Crimp contact: 2 pcs. Class 1 identification label: 1 pc. (LA-510 only) Inspection slip: 1 pc. (LA-511 only) Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 °F. 2) LA-510 and LA-511 are CE compliant and complies with EMC directives. EN 61000-6-2 is the applicable standard that covers immunities relating to use of this product, but in order to comply with this standard, the following conditions must be satisfied. Conditions • This sensor should be connected less than 10 m 32.808 ft from the power supply. • The signal line to connect with this sensor should be less than 30 m 98.425 ft. Laser Collimated Beam Sensor LA SERIES 1132 I/O CIRCUIT AND WIRING DIAGRAMS FIBER SENSORS LA-510  LA-511 Laser collimated beam sensor I/O circuit diagram PHOTOELECTRIC SENSORS Wiring diagram MICRO PHOTOELECTRIC SENSORS Emitter Color code Enclosure D (Brown) +V Sensor circuit Shield + *1 Emitter 12 to 24 V DC ±10 % – (Pink) Remote interlock Pink Users’ circuit Receiver Enclosure D Sensor circuit Tr + 12 to 24 V DC ±10 % 75 Ω PRESSURE / FLOW SENSORS Orange/Violet INDUCTIVE PROXIMITY SENSORS Shield PARTICULAR USE SENSORS Shield SENSOR OPTIONS Orange/Violet SIMPLE WIRE-SAVING UNITS Brown WIRE-SAVING SYSTEMS Receiver Shield (White) Analog voltage output Load Z D1 Z D2 C Internal circuit + 12 to 24 V DC ±10 % – Load Shield Black (Black) Comparative 100 mA max. output (Blue) 0 V White To analog input circuit + Users’ circuit Symbols … D : Reverse supply polarity protection diode ZD1, ZD2: Surge absorption zener diode C : Capacitor (0.022 μF) Tr: NPN output transistor – 12 to 24 V DC ±10 % MEASUREMENT SENSORS STATIC CONTROL DEVICES LASER MARKERS Blue *1 SAFETY LIGHT CURTAINS / SAFETY COMPONENTS Blue (Brown) +V (Orange/Violet) Sync. + – *1 – (Blue) 0 V Internal circuit AREA SENSORS Brown (Orange/Violet) Sync. C LASER SENSORS • Remote interlock Laser emission: Connection to 0 V Laser emission halt: Connection to +V, or open PLC HUMAN MACHINE INTERFACES ENERGY MANAGEMENT SOLUTIONS FA COMPONENTS SENSING CHARACTERISTICS (TYPICAL) Correlation between setting distance and excess gain Correlation between transverse deviation and output voltage 100 MACHINE VISION SYSTEMS Correlation between interrupted beam width and output voltage 8 8 6 6 Correlation between ambient temperature and output voltage variation rate UV CURING SYSTEMS 10 5 4 2 500 mm 19.685 in Receiver Emitter 1 0 0.5 1 1.5 2 2.5 1.640 3.281 4.921 6.562 8.202 Setting distance L (m ft) 0 10 0.394 Output voltage variation rate (%) 10 Output voltage (V) Output voltage (V) Excess gain 50 4 2 5 Selection Guide Laser Displacement 0 Magnetic Displacement Contact Displacement –5 ℓ 5 0 5 10 0.197 0.197 0.394 Left Center Right Deviation ℓ (mm in) 0 5 0.197 10 0.394 15 20 0.591 0.787 (Lightest) (Darkest) Interrupted beam width D (mm in) –10 0 32 30 10 20 40 50 68 86 104 Ambient temperature (°C °F) 50 122 Collimated Beam Sensors Metal-sheet Double-feed Detection Digital Panel Controller Other Products HL-T1 LD LA 1133 FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS SAFETY LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS Laser Collimated Beam Sensor LA SERIES PRECAUTIONS FOR PROPER USE Refer to p.1595 for general precautions and p.1593~ for information about laser beam. Laser collimated beam sensor • This catalog is a guide to select a suitable product. Be sure to read the instruction manual attached to the product prior to its use. • Never use this product as a sensing device for personnel protection. • In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. • This product is classified as a Class 1 Laser Product in IEC / JIS standards and a Class I Laser Product in FDA regulations. Do not look at the laser beam through optical system such as a lens. • The following label is enclosed with this product. Handle the product according to the instruction given on the warning label. Class 1 type STATIC CONTROL DEVICES The English warning label based on FDA regulations is pasted on the FDA regulations conforming type. LASER MARKERS PLC HUMAN MACHINE INTERFACES ENERGY MANAGEMENT SOLUTIONS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS Selection Guide Laser Displacement Magnetic Displacement Contact Displacement Collimated Beam Sensors Metal-sheet Double-feed Detection Digital Panel Controller Other Products HL-T1 LD LA Mounting • The emitter and the receiver must face each other with proper slit orientation so that the beam can be received. • The tightening torque should be 1.17 N·m or less. When mounting the sensor with the attached sensor mounting bracket, the sensor must be fixed on both sides. Align the slit orientation Sensor mounting bracket MS-LA1 (Accessory) Wiring • In LA-510 and LA-511, capacitor earth is used to enhance the noise characteristics. In case there is a high frequency noise generating equipment, such as, an ultrasonic welding machine, etc., near the sensor head and if the mounting base is electrically conducting (metallic, etc.), then insulate the sensor head from the mounting base. Do not use a power supply having a single-winding transformer (auto-transformer) as this can be dangerous. Safety standards for laser beam products • A laser beam can harm human being’s eyes, skin, etc., because of its high energy density. IEC has classified laser products according to the degree of hazard and the stipulated safety requirements. LA-510 is identified as a “Class 1” laser product. Classification by IEC 60825-1 Classification Class 1 Description Lasers that are safe under reasonably foreseeable conditions of operation, including the use of optical instruments for intrabeam viewing. Note: R  efer to p.1594 for information about Laser Beam for the classification in FDA regulations. Safe use of laser products • For the purpose of preventing users from suffering injuries by laser products, IEC 60825-1 (Safety of laser products). Please check the standards before use. (Refer to p.1593~ for information about laser beam.) Others • The sensor’s output is proportional to the amount of laser beam received. Since there is some variation in the light intensity at the center and the periphery of the sensing area, take care that “output = dimension” may not hold. • For stable operation, use the sensor 10 min., or more, after switching on the power supply. Laser Collimated Beam Sensor DIMENSIONS (Unit: mm in) LA SERIES 1134 The CAD data can be downloaded from our website. LA-510 LA-511 Laser collimated beam sensor 30 1.181 Emitter 16 0.630 9.5 0.374 75 2.953 32 26 1.260 1.024 13.7 0.539 3.2 0.126 40 (3.2) (0.126) 1.575 2-M4 × 0.7 0.028, 10 0.394 deep (on both sides) 31.8 1.252 4-M3 × 0.5 0.020, 6 0.236 deep Span adjuster Operation indicator (Red) ø5.7 ø0.224 cable, 75 3 m 9.843 ft long 2.953 5 0.197 32 26 1.260 1.024 13.7 0.539 31.8 1.252 Laser beam alignment monitor elements 3.2 0.126 40 (3.2) (0.126) 1.575 2-M4 × 0.7 0.028, 10 0.394 deep (on both sides) Assembly dimensions 7 0.276 19 0.748 4 0.157 4.2 0.165 13 0.512 20 0.787 t 1.6 t 0.063 STATIC CONTROL DEVICES 19 7 9 0.748 0.276 0.354 50 1.969 13 0.512 ENERGY MANAGEMENT SOLUTIONS 4.2 0.165 7 0.276 FA COMPONENTS MACHINE VISION SYSTEMS t 1.6 t 0.063 Beam axis 13 0.512 23.5 0.925 Selection Guide Side view attachment (Optional) 32 1.260 SENSOR OPTIONS UV CURING SYSTEMS 41.8 1.646 25.8 1.016 LA-SV1 Mounting surface 5 0.197 for LA-510 or LA-511 PARTICULAR USE SENSORS HUMAN MACHINE INTERFACES 29 1.142 4 0.157 27.8 1.094 Set of two L-shaped brackets and four M4 (length 8 mm 0.315 in) screws with washers INDUCTIVE PROXIMITY SENSORS PLC 7 20 0.276 0.787 Material: Cold rolled carbon steel (SPCC) (Uni-chrome plated) PRESSURE / FLOW SENSORS LASER MARKERS (72) 58 (2.835) 2.283 7 0.276 7 9 0.276 0.354 SAFETY LIGHT CURTAINS / SAFETY COMPONENTS MEASUREMENT SENSORS Sensor mounting bracket (Accessory for LA-510 and LA-511) 50 1.969 42 4.2 1.654 0.165 MICRO PHOTOELECTRIC SENSORS WIRE-SAVING SYSTEMS 2-M4 × 0.7 0.028, 4 0.157 deep MS-LA1 PHOTOELECTRIC SENSORS SIMPLE WIRE-SAVING UNITS Laser beam receiving part (15 × 1) (0.591 × 0.039) 4-M3 × 0.5 0.020, 6 0.236 deep 2-M4 × 0.7 0.028, 4 0.157 deep LASER SENSORS AREA SENSORS 16 0.630 4.4 0.173 1.8 0.071 Laser beam alignment monitor 32 1.260 26 1.024 ø5.7 ø0.224 cable, 3 m 9.843 ft long 5 0.197 6 0.236 Threshold level adjuster 12.4 0.488 Laser emission warning indicator (Red) 32 1.260 26 1.024 Laser beam emitting part 7.5 18.5 0.295 30 1.181 0.728 12.4 0.488 Receiver FIBER SENSORS Laser Displacement Magnetic Displacement Assembly dimensions Contact Displacement Collimated Beam Sensors Metal-sheet Double-feed Detection 32 1.260 Digital Panel Controller 3 0.118 26 1.024 8 0.315 Other Products 32 1.260 (0.6) (0.024) 32 1.260 32 1.260 (112) (4.409) 75 2.953 32 1.260 2-ø3.4 ø0.134 mounting holes Beam axis Material: Glass (Front protection cover, Aluminum evaporated mirror) Polyetherimide (Enclosure) Two M3 (length 10 mm 0.394 in) screws with washers are attached. 47.8 1.882 Beam axis HL-T1 5 0.197 LD LA