LNJ167W87RA

LNJ167W87RA Surface Mounting Chip LED  Lighting Color  Pure Green  Pure Green  Red Symbol Rating Unit Power dissipation PD 75 mW Forward current IF 20 mA Pulse forward current * IFP 70 mA Reverse voltage VR 5 V Operating ambient temperature Topr –30 to +85 °C Storage temperature Tstg –40 to +100 °C M Di ain sc te on na tin nc ue e/ d Parameter yp e  Absolute Maximum Ratings Ta = 25°C ) ESS Type  Red Parameter Power dissipation Forward current Pulse forward current * Reverse voltage Operating ambient temperature Storage temperature M ma ain int ten en an an ce ce /D typ isc e, ont ma inu int ed en in an clu ce de typ s f e, ollo pla wi ne ng d d fou isc r P on rod tin uc ue t l d t ife yp cy ed cle , d st isc ag on e. tin ue dt Note) *: The condition of IFP is duty 10%, Pulse width 1 msec. Symbol Rating Unit PD 55 mW IF 20 mA IFP 60 mA VR 4 V Topr –30 to +85 °C Tstg –40 to +100 °C Note) *: The condition of IFP is duty 10%, Pulse width 1 msec.  Electro-Optical Characteristics Ta = 25°C±3°C  Pure Green Symbol Luminous intensity *1 Forward current Forward voltage Peak emission wavelength Spectral half band width (p lan Dominant emission wavelength *2 ed Parameter Conditions Min Typ Max Unit 18.0 90.0 180.0 mcd 100 mA 3.3 V IO IF = 5 mA IR VR = 5 V VF IF = 5 mA 3.0 λP IF = 5 mA 520 λd IF = 5 mA Δλ IF = 5 mA 518 525 40 nm 533 nm nm Note) *1: Measurement tolerance: ±20% *2: Measurement tolerance: ±3 nm Publication date: May 2014 Ver. AEK 1 LNJ167W87RA  Electro-Optical Characteristics (Continued) Ta = 25°C±3°C  Red Parameter Symbol Conditions Min Typ Max Unit 11.0 15.0 52.0 mcd 100 mA 2.30 V Luminous intensity *1 IO IF = 5 mA Reverse current IR VR = 4 V Forward voltage VF IF = 5 mA 1.95 Peak emission wavelength λP IF = 5 mA 638 Dominant emission wavelength *2 λd IF = 5 mA Spectral half band width Δλ IF = 5 mA 615 nm 628 634 nm 20 nm M Di ain sc te on na tin nc ue e/ d Note) *1: Measurement tolerance: ±20% *2: Measurement tolerance: ±3 nm IO  IF Pure Green Red 1 Red 10 10 1 1 000 Ta = 25°C 10 1 102 Forward current IF (mA) 1.0 Pure Green 2.0 3.0 4.0 10 5.0 80 25 Directive characteristics 30r 40r X Y 0r 20r 10r 450 500 550 600 650 90r 100 60 80 100 IF  Ta 60r 70r Red Pure Green 40 20 0 20 40 60 Relative luminous intensity (%) 80 10 5 80r 90r 100 0 0 20 40 60 80 100 Ambient temperature Ta (°C) (p lan ed Peak emission wavelength λP (nm) 50r 20r 60 Pure Green Red 15 40r Red 80 30r 40r 70rPure Green 80r 0 400 40 20 60r 60r 20 10r 20r 80r 50r 40 20 Y X 60 0 Red Ambient temperature Ta (°C) F 100 Ta = 25°C IF = 5 mA −20 Forward voltage VF (V) Red Pure Green Pure Green 100 Relative luminous intensity  λP Relative luminous intensity (%) Relative luminous intensity  Ta F 102 IF  VF 100 Ta = 25°C M ma ain int ten en an Forward current I (mA) an ce ce /D typ isc e, ont ma inu int ed en in an clu ce de typ s f e, ollo pla wi ne ng d d fou isc r PRelative luminous intensity (%) Forward current I (mA) on rod tin uc ue t l d t ife yp cy ed cle , d st isc ag on e. tin ue dt yp e) Luminous intensity IO (mcd) 103 Ver. AEK 2 (p lan ed M ma ain int ten en an an ce ce /D typ isc e, ont ma inu int ed en in an clu ce de typ s f e, ollo pla wi ne ng d d fou isc r P on rod tin uc ue t l d t ife yp cy ed cle , d st isc ag on e. tin ue dt Ver. AEK ) yp e M Di ain sc te on na tin nc ue e/ d LNJ167W87RA  Package (Unit: mm) 3 Request for your special attention and precautions in using the technical information and semiconductors described in this book (1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) The technical information described in this book is intended only to show the main characteristics and application circuit examples of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information de-scribed in this book. e) M ma ain int ten en an an ce ce /D typ isc e, ont ma inu int ed en in an clu ce de typ s f e, ollo pla wi ne ng d d fou isc r P on rod tin uc ue t l d t ife yp cy ed cle , d st isc ag on e. tin ue dt yp M Di ain sc te on na tin nc ue e/ d (3) The products described in this book are intended to be used for general applications (such as office equipment, communications equipment, measuring instruments and household appliances), or for specific applications as expressly stated in this book. Please consult with our sales staff in advance for information on the following applications, moreover please exchange documents separately on terms of use etc.: Special applications (such as for in-vehicle equipment, airplanes, aerospace, automotive equipment, traffic signaling equipment, combustion equipment, medical equipment and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Unless exchanging documents on terms of use etc. in advance, it is to be understood that our company shall not be held responsible for any damage incurred as a result of or in connection with your using the products described in this book for any special application. (4) The products and product specifications described in this book are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most upto-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. We do not guarantee quality for disassembled products or the product re-mounted after removing from the mounting board. When using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) When reselling products described in this book to other companies without our permission and receiving any claim of request from the resale destination, please understand that customers will bear the burden. (8) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company. (p lan ed No.010618