This product complies with the RoHS Directive (EU 2002/95/EC).
Light Emitting Diodes
LNJ717W83RAS
Surface Mounting Chip LED
TSS-3 Type
Absolute Maximum Ratings Ta = 25°C
Lighting Color
Pure Green
Pure Green
Orange
Blue
Parameter
Symbol
Rating
Unit
PD
65
mW
Forward current
IF
15
mA
Pulse forward current *
IFP
50
mA
Reverse direct current
IRDC
100
mA
Operating ambient temperature
Topr
–30 to +85
°C
Storage temperature
Tstg
–40 to +100
°C
Symbol
Rating
Unit
Power dissipation
PD
70
mW
Forward current
Power dissipation
Note) *: The condition of IFP is duty 10%, Pulse width 1 msec.
Orange
Parameter
IF
20
mA
Pulse forward current *
IFP
60
mA
Reverse voltage
VR
4
V
Operating ambient temperature
Topr
–30 to +85
°C
Storage temperature
Tstg
–40 to +100
°C
Symbol
Rating
Unit
Power dissipation
PD
65
mW
Forward current
IF
15
mA
Note) *: The condition of IFP is duty 10%, Pulse width 1 msec.
Blue
Parameter
Pulse forward current *
IFP
50
mA
Reverse direct current
IRDC
100
mA
Operating ambient temperature
Topr
–30 to +85
°C
Storage temperature
Tstg
–40 to +100
°C
Note) *: The condition of IFP is duty 10%, Pulse width 1 msec.
Electro-Optical Characteristics Ta = 25°C
Pure Green
Parameter
Symbol
Conditions
Min
Typ
Max
Unit
60
90
160
mcd
IF = 5 mA
3.1
3.7
V
λP
IF = 5 mA
525
nm
λd
IF = 5 mA
Δλ
IF = 5 mA
45
nm
Luminous intensity *1
IO
IF = 5 mA
Forward voltage
VF
Peak emission wavelength
Dominant emission wavelength *2
Spectral half band width
Note) *1: Measurement tolerance: ±15%
*2: Measurement tolerance: ±3 nm
Publication date: April 2009
SHD00445CEK
1
This product complies with the RoHS Directive (EU 2002/95/EC).
LNJ717W83RAS
Electro-Optical Characteristics (Continued) Ta = 25°C
Orange
Parameter
Symbol
Conditions
Min
Typ
Max
Unit
20
45
80
mcd
100
µA
2.5
V
Luminous intensity *1
IO
IF = 10 mA
Reverse current
IR
VR = 4 V
Forward voltage
VF
IF = 10 mA
2.0
Peak emission wavelength
λP
IF = 10 mA
630
Dominant emission wavelength *2
λd
IF = 10 mA
Spectral half band width
Δλ
IF = 10 mA
610
nm
620
630
nm
15
nm
Note) *1: Measurement tolerance: ±15%
*2: Measurement tolerance: ±3 nm
Blue
Parameter
Symbol
Conditions
Min
Typ
Max
Unit
15
35
60
mcd
IF = 5 mA
3.1
3.7
V
λP
IF = 5 mA
470
λd
IF = 5 mA
Δλ
IF = 5 mA
Luminous intensity *1
IO
IF = 5 mA
Forward voltage
VF
Peak emission wavelength
Dominant emission wavelength *2
Spectral half band width
465
nm
472
485
nm
30
nm
Note) *1: Measurement tolerance: ±15%
*2: Measurement tolerance: ±3 nm
Pure Green
50
30
Blue
10
Orange
5
3
1
1
3
5
10
30
50
10
50
Forward current IF (mA)
Luminous intensity IO (mcd)
500
300
100
IF VF
100
Relative luminous intensity (%)
IO IF
1 000
30
Pure Green
Blue
Orange
10
5
3
1
100
1.0
Forward current IF (mA)
2.0
3.0
4.0
Pure Green
Orange
Directive characteristics
80
−30°
60
60°
−60°
450
500
550
600
Peak emission wavelength λP (nm)
40°
50°
Pure Green
60°
Orange
20°
−80°
−90°
100
650
30°
40°
−70°
20
10° 20°
80°
−50°
0
400
2
0°
−20° −10°
−40°
40
Pure Green
Blue
1
Orange
0.5
0.3
−20
0
60
40
20
0
40
60
80
100
70°
20
15
Orange
10
Pure Green
Blue
5
80°
Blue
80
20
IF Ta
25
Forward current IF (mA)
Relative luminous intensity (%)
Blue
3
Ambient temperature Ta (°C)
Relative luminous intensity λP
100
5
0.1
5.0
Forward voltage VF (V)
Relative luminous intensity Ta
20
40
60
Relative luminous intensity (%)
SHD00445CEK
80
90°
100
0
0
20
40
60
80
Ambient temperature Ta (°C)
100
This product complies with the RoHS Directive (EU 2002/95/EC).
LNJ717W83RAS
Package (Unit: mm)
KLTFTN6K1740
Pin name
1, 2, 3: Anode
4, 5, 6: Cathode
SHD00445CEK
3
Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any
other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any
other company which may arise as a result of the use of technical information described in this book.
(3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office
equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
– Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body.
– Any applications other than the standard applications intended.
(4) The products and product specifications described in this book are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company.
20080805
很抱歉,暂时无法提供与“LNJ717W83RAS”相匹配的价格&库存,您可以联系我们找货
免费人工找货