LNJ727W83RAA

This product complies with the RoHS Directive (EU 2002/95/EC). Light Emitting Diodes LNJ727W83RAA Surface Mounting Chip LED USS-3 Type  Absolute Maximum Ratings Ta = 25°C  Lighting Color  Pure Green  Pure Green  Orange  Blue Parameter Symbol Rating Unit PD 65 mW Forward current IF 15 mA Pulse forward current * IFP 50 mA Reverse direct current IRDC 100 mA Operating ambient temperature Topr –30 to +85 °C Storage temperature Tstg –40 to +100 °C Symbol Rating Unit Power dissipation PD 55 mW Forward current Power dissipation Note) *: The condition of IFP is duty 10%, Pulse width 1 msec.  Orange Parameter IF 20 mA Pulse forward current * IFP 60 mA Reverse voltage VR 4 V Operating ambient temperature Topr –30 to +85 °C Storage temperature Tstg –40 to +100 °C Symbol Rating Unit Power dissipation PD 65 mW Forward current IF 15 mA Note) *: The condition of IFP is duty 10%, Pulse width 1 msec.  Blue Parameter Pulse forward current * IFP 50 mA Reverse direct current IRDC 100 mA Operating ambient temperature Topr –30 to +85 °C Storage temperature Tstg –40 to +100 °C Note) *: The condition of IFP is duty 10%, Pulse width 1 msec.  Electro-Optical Characteristics Ta = 25°C±3°C  Pure Green Parameter Symbol Conditions Min Typ Max Unit 60 80 120 mcd IF = 5 mA 3.1 3.8 V λP IF = 5 mA 525 λd IF = 5 mA Δλ IF = 5 mA Luminous intensity *1 IO IF = 5 mA Forward voltage VF Peak emission wavelength Dominant emission wavelength *2 Spectral half band width 525 535 45 nm 550 nm nm Note) *1: Measurement tolerance: ±20% *2: Measurement tolerance: ±3 nm Publication date: March 2010 SHD00714CEK 1 This product complies with the RoHS Directive (EU 2002/95/EC). LNJ727W83RAA  Electro-Optical Characteristics (Continued) Ta = 25°C±3°C  Orange Parameter Symbol Conditions Min Typ Max Unit 20 40 80 mcd 100 µA 2.5 V Luminous intensity *1 IO IF = 10 mA Reverse current IR VR = 4 V Forward voltage VF IF = 10 mA 2.0 Peak emission wavelength λP IF = 10 mA 630 Dominant emission wavelength *2 λd IF = 10 mA Spectral half band width Δλ IF = 10 mA 610 nm 620 630 nm 15 nm Note) *1: Measurement tolerance: ±20% *2: Measurement tolerance: ±3 nm  Blue Parameter Symbol Conditions Min Typ Max Unit 5 15 35 mcd IF = 5 mA 3.1 3.8 V λP IF = 5 mA 470 λd IF = 5 mA Δλ IF = 5 mA Luminous intensity *1 IO IF = 5 mA Forward voltage VF Peak emission wavelength Dominant emission wavelength *2 Spectral half band width 465 nm 472 480 nm 30 nm Note) *1: Measurement tolerance: ±20% *2: Measurement tolerance: ±3 nm Forward Current IF (mA) Luminous Intensity IO (mcd) 500 Pure Green 100 Orange Blue 50 10 5 1 1 3 5 IF  VF 100 10 30 50 50 10 5 3 1 100 Blue Pure Green Orange 30 Relative Luminous Intensity  Ta 10 Relative Luminous Intensity (%) IO  I F 1 000 1 2 Forward Current IF (mA) 3 4 80 30° 60 40° 70° 500 550 600 650 90° 700 100 10° 20° 30° 40° 50° 60° Blue 60° 40° Orange 80 70° 20° 80° Pure Green 450 0° 80° 60° Peak Emission Wavelength λP (nm) 2 20° 10° 50° 0 400 0.3 −20 0 60 40 20 0 20 40 60 80 100 IF  Ta 25 Directive Characteristics 20 Orange 0.5 Ambient Temperature Ta (°C) Orange 40 Blue Pure Green 1 Forward Voltage VF (V) Forward Current IF (mA) Relative Luminous Intensity (%) 100 3 0.1 5 Relative Luminous Intensity  λP Blue Pure Green 5 Orange 20 Blue Pure Green 15 10 5 80° 20 40 60 Relative Luminous Intensity (%) SHD00714CEK 80 90° 100 0 −20 0 20 40 60 80 Ambient Temperature Ta (°C) 100 This product complies with the RoHS Directive (EU 2002/95/EC). LNJ727W83RAA  Package (Unit: mm) KLTFTN6K2740  Pin name 1, 2, 3: Anode 4, 5, 6: Cathode SHD00714CEK 3 Request for your special attention and precautions in using the technical information and semiconductors described in this book (1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) The technical information described in this book is intended only to show the main characteristics and application circuit examples of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) The products described in this book are intended to be used for general applications (such as office equipment, communications equipment, measuring instruments and household appliances), or for specific applications as expressly stated in this book. Consult our sales staff in advance for information on the following applications: – Special applications (such as for airplanes, aerospace, automotive equipment, traffic signaling equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. It is to be understood that our company shall not be held responsible for any damage incurred as a result of or in connection with your using the products described in this book for any special application, unless our company agrees to your using the products in this book for any special application. (4) The products and product specifications described in this book are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company. 20100202