MS-AJ2-A

PHOTOELECTRIC SENSORS MS-AJ SERIES CY Universal Sensor Mounting Stand MS-AJ Sensor Mounting Stand RT-610 PX-2 Amplifier Built-in Simple mounting and easy adjustment with versatile mounting stand Flexible height adjustment Mountable on vertical or horizontal plane PM Mounting on horizontal plane Flexible angle adjustment Swivel: 360 revolution Micro Conveyor line PM2 150 mm 5.906 in approx. Elevation angle 45 Securely fixed with two M6 screws Mounting on vertical plane Conveyor line NX5 Cable can be neatly threaded into pipe Cable guide EQ-500 VF Multi-voltage Note: The elevation angle is (assembly for fiber). Mountable on aluminum frame 20 for MS-AJ-F Eight models MS-AJ (Basic assembly) It is used to mount CX-4 0 0, CX-20, CX-30, EQ-20, EX-40 and EZ-10 series sensors, and the RF-210 reflector. MS-AJ-A (Lateral arm assembly) A lateral arm is added to the MS-AJ basic assembly. Sensing is possible from above an assembly line. MS-AJ-M (Assembly for reflector) The MS-AJ basic assembly is modified to mount a reflector. It can be used for RF-220 and RF-230 reflector. MS-AJ1 MS-AJ1-A MS-AJ1-M MS-AJ2-M MS-AJ-F (Assembly for fiber) The sensor mounting bracket of MS-AJ-A is replaced with a fiber mounting bracket. It can be used with FD-L51, FD-L52, FD-L53, FD-L54 and M3, M4 or M6 threaded head fiber. Pipe Note: Do not thread the fiber cable into the pipe in case of MS-AJ-F (assembly for fiber). 332 MS-AJ2 MS-AJ2-A MS-AJ1-F MS-AJ2-F Ramco Innovations - 1207 Maple Street, West Des Moines IA USA 50265 - 800-280-6933 - www.ramcoinnovations.com PHOTOELECTRIC SENSORS MS-AJ STRUCTURE 4 H I B A 9 C 2 F 4 B 2 A 9 C (e.g.) CX-400 series E 0 7 0 3 (e.g.) RF-230 G 5 7 J D (e.g.) FD-L52 K 0 0 7 6 D 0 (e.g.) CX-400 series 1 (MS-AJ1B) 8 0 5 1 (MS-AJ2B) CY 0 3 MS-AJ-F (assembly for fiber) includes parts enclosed by the dotted line in place of 4 sensor mounting bracket. F G E 1 (MS-AJ1B) 8 1 (MS-AJ2B) Type Assembly sets Components MS-AJ MS-AJ-A MS-AJ-M MS-AJ-F MS-AJS MS-AJR MS-AJ-R1 MS-AJD MS-FD-1 MS-AJL MS-AJ1B MS-AJ2B MS-AJG MS-AJP Lateral arm Assembly Reflector Reflector Fiber Fiber mounting Arm joint (Base unit) (Base unit) Assembly Sensor Model No. Basic (Cable guide) [Arm (Pipe)] assembly assembly for reflector for fiber mounting unit mounting unit mounting bracket mounting unit bracket unit Designation (Note 2) (Note 2) 1 1 1 1 Base 1 1 1 2 1 2 Arm (Pipe) 1 1 1 1 1 Attachment 1 1 1 1 1 Sensor mounting bracket 1 1 2 2 Cable guide 1 1 1 Arm joint 1 M4 (length 12 mm 0.472 in) hexagon-socket-head bolt 1 3 1 3 1 1 1 2 (Drilube applied product) )( )( )( )( )( )( )( ) 1 1 NX5 8 M4 (length 15 mm 0.591in) hexagon-socket-head bolt 1 1 1 1 1 (Drilube applied product) M4 (length 22 mm 0.866 in) hexagon-socket-head bolt 9 1 1 1 1 1 1 1 (Drilube applied product) 0 M4 nut 3 5 3 5 2 2 2 2 1 A M4 spring washer 1 1 1 1 1 1 1 B M4 plain washer 1 1 1 1 1 1 1 C M3 (length 14 mm 0.551 in) screw with washers 2 2 2 for CX-400, CX-20, CX-30 and EZ-10 series D M3 (length 18 mm 0.709 in) screw with washers for EQ-20 series 2 2 2 E Auxiliary mounting plate for EQ-20 series 1 1 1 F M3 (length 16 mm 0.630 in) screw with washers for EX-40 series 2 2 2 G Auxiliary mounting plate for EX-40 series 1 1 1 H Reflector mounting bracket 1 1 1 I M3 (length 8 mm 0.315 in) screw with washers for RF-220 2 2 2 J M4 (length 8 mm 0.315 in) screw with washers for RF-230 2 2 2 K Fiber mounting bracket 1 1 1 Notes: 1) The numbers shown in the table above indicate the quantities of the respective parts. Notes: 2) One MS-AJ1B, horizontal mounting type, and one MS-AJ2B, vertical mounting type, are included in each assembly set. PM )( PM2 7 )( Micro ( 1 2 3 4 5 6 Amplifier Built-in RT-610 PX-2 7 MS-AJ-A, MS-AJ-F MS-AJ-M (assembly for reflector) includes parts enclosed by the dotted line in place of 4 sensor mounting bracket. Sensor Mounting Stand MS-AJ MS-AJ, MS-AJ-M 0 5 ORDER GUIDE Basic assembly Lateral arm assembly Assembly for reflector Appearance Horizontal mounting type Vertical mounting type Model No. MS-AJ1 MS-AJ1 MS-AJ2 MS-AJ2 Horizontal mounting type MS-AJ1-A Vertical mounting type MS-AJ2-A MS-AJ1-A MS-AJ2-A Horizontal mounting type Vertical mounting type Applicable sensor, reflector and fiber CX-400 series CX-20 series CX-30 series EQ-20 series EX-40 series EZ-10 series RF-210 (Reflector) Designation Appearance Model No. Sensor mounting unit MS-AJS Reflector mounting unit MS-AJR Reflector mounting bracket MS-AJ-R1 Fiber mounting unit MS-AJD Fiber mounting bracket MS-FD-1 Arm joint unit MS-AJL Base unit (Horizontal mounting type) MS-AJ1B Base unit (Vertical mounting type) MS-AJ2B Cable guide MS-AJG Arm (Pipe) MS-AJP MS-AJ1-M MS-AJ1-M MS-AJ2-M MS-AJ2-M Horizontal mounting type MS-AJ1-F Vertical mounting type MS-AJ2-F Assembly for fiber MS-AJ1-F MS-AJ2-F RF-220 (Reflector) RF-230 (Reflector) FD-L51 (Fiber) FD-L52 (Fiber) FD-L53 (Fiber) FD-L54 (Fiber) M3, M4 and M6 threaded head fibers Ramco Innovations - 1207 Maple Street, West Des Moines IA USA 50265 - 800-280-6933 - www.ramcoinnovations.com 333 EQ-500 Type Multi-voltage VF Individual components are also available as follows PHOTOELECTRIC SENSORS MS-AJ PRECAUTIONS FOR PROPER USE Mounting • To mount the universal sensor mounting stand on your equipment, use M6 screws. The tightening torque should be 2.0 Nm or less. CY Mounting on horizontal plane Mounting on vertical plane M6 screws RT-610 PX-2 Amplifier Built-in MS-AJ1B Conveyor line Conveyor line M6 screws MS-AJ2B Adjustment • Arm, attachment, base and arm joint can be adjusted as shown by the arrows in the figure below by loosening the M4 hexagon-socket-head bolts. MS-AJ Sensor Mounting Stand M4 hexagon-socket-head bolts M4 hexagon-socket-head bolts Others • Do not apply excessive force on any part of the universal sensor mounting stand. • When using this stand, take care that excessive vibration is not applied to the sensor. • After the adjustment, the tightening torque of the M4 hexagon-socket-head bolts should be 1.2 Nm or less. Micro PM DIMENSIONS (Unit: mm in) MS-AJ1 17.8 0.701 12 2-"3.2 "0.126 0.472 mounting holes t2 2-3.2 0.1264.2 0.165 t 0.079 oblong holes 1 0.039 PM2 11.8 0.465 20 0.787 6 0.236 NX5 28 20 1.102 0.787 4 0.157 33 25 20 1.299 0.984 0.787 Attachment (Nylon 6) 3.2 0.126 20 1 0.787 0.039 Sensor mounting bracket [Stainless steel (SUS304)] (147) (5.787)(Note) Cable guide (POM) 45 28 20 1.102 0.787 4 0.157 20 25 33 1.299 0.984 0.787 45 4.2 0.165 M4 hexagonsocket-head bolt Basic assembly 17.8 0.701 12 2-"3.2 "0.126 0.472 mounting holes t2 2-3.2 0.1264.2 0.165 t 0.079 oblong holes 1 0.039 11.8 0.465 20 0.787 6 0.236 "10 "0.394 pipe [Stainless steel (SUS304)] (218) (8.583) VF Multi-voltage MS-AJ2 Basic assembly Cable guide (POM) EQ-500 Threading cable into pipe • When the sensor is mounted on MS-AJ (basic assembly) or on MS-AJ-A (lateral arm assembly), the sensor cable can be threaded through the pipe. However, do not thread the fiber cable through the pipe when a fiber head is mounted on MS-AJ-F (assembly for fiber). Attachment (Nylon 6) 20 1 0.787 0.039 Sensor mounting bracket [Stainless steel (SUS304)] (147) (5.787)(Note) 45 3.2 0.126 45 4.2 0.165 M4 hexagonsocket-head bolt "10 "0.394 pipe [Stainless steel (SUS304)] (210) (8.268) 2-"6.6 "0.260 mounting holes 8 0.315 (44.5) (1.752) 28 1.102 18 0.709 20 0.787 45 1.772 32 1.260 10 0.394 2-"6.6 "0.260 mounting holes Two M3 (length 14 mm 0.551 in) screws with washers, two M3 (length 16 mm 0.630 in) screws with washers, two M3 (length 18 mm 0.709 in) screws with washers, one auxiliary mounting plate for EQ-20 series and one auxiliary mounting plate for EX-40 series are attached. Note: The dimensions in the brackets indicate the adjustable range of the movable part. 334 32 1.260 46 1.811 Base (PA) 25.5 1.004 10 0.394 (36.5) (1.437) 20 0.787 20 0.787 31 1.220 8 15 0.591 0.315 Base (PA) 24.5 0.965 Two M3 (length 14 mm 0.551 in) screws with washers, two M3 (length 16 mm 0.630 in) screws with washers, two M3 (length 18 mm 0.709 in) screws with washers, one auxiliary mounting plate for EQ-20 series and one auxiliary mounting plate for EX-40 series are attached. Note: The dimensions in the brackets indicate the adjustable range of the movable part. Ramco Innovations - 1207 Maple Street, West Des Moines IA USA 50265 - 800-280-6933 - www.ramcoinnovations.com PHOTOELECTRIC SENSORS MS-AJ DIMENSIONS (Unit: mm in) Assembly dimensions with CX-400 series, CX-20 series, CX-30 series, EZ-10 series (Mounting part only) 45 Attachment (Nylon 6) 45 25 0.984 CX-400: 25.4 1.000 45 33.3 25 1.311 0.984 45 4.2 0.165 Note: The dimensions in the brackets indicate the adjustable range of the movable part. MS-AJ2-M 11.8 0.465 4.2 0.165 22 0.866 2-M4 2-M3 M4 hexagonsocket-head bolt t 2 t 0.079 45 45 Attachment (Nylon 6) (143.5) (5.650)(Note) (200) (7.874) 4.2 0.165 20 0.787 28 1.102 "10 "0.394 pipe [Stainless steel (SUS304)] 2-"6.6 "0.260 mounting holes 10 0.394 (40) (1.575) 20 0.787 32 1.260 46 1.811 20 0.787 45 45 17 0.669 Assembly for reflector 25 40 50 0.984 1.575 1.969 31.8 20 1.252 0.787 2-M3 (length 14 mm 0.551 in) screws with washers Two M3 (length 8 mm 0.315 in) screws with washers and two M4 (length 8 mm 0.315 in) screws with washers are attached. 32 10 0.394 1.260 2-"6.6 "0.260 mounting holes PM 45 33 1.299 8 0.315 25.5 1.004 24.4 0.961 17 0.669 20 28 t2 1.102 0.787 t 0.079 27 Center of 1.063 sensing 45 15.5 0.610 33 19 1.299 0.748 45 3 0.118 4.2 0.165 Auxiliary mounting plate for EX-40 series 24.8 0.976 18.4 0.724 t2 t 0.079 18 0.709 20 0.787 45 1.772 20 28 1.102 0.787 26.5 1.043 5 0.197 Auxiliary mounting plate for EQ-20 series Base (PA) (44.5) (1.752) 28 1.102 Assembly dimensions with RF-210 (Reflector) (Mounting part only) 11.8 0.465 20 0.787 6 0.236 "10 "0.394 pipe [Stainless steel (SUS304)] PM2 2-M3 (length 16 mm 0.630 in) screws with washers 20 0.787 28 1.102 Base (PA) NX5 6 0.236 (147) (5.787)(Note) (208) (8.189) 4.2 0.165 33 1.299 26.4 1.039 18 0.709 t 2 t 0.079 Center of sensing 4.2 0.165 24.5 0.965 31 1.220 8 15 0.591 0.315 Two M3 (length 8 mm 0.315 in) screws with washers and two M4 (length 8 mm 0.315 in) screws with washers are attached. Note: The dimensions in the brackets indicate the adjustable range of the movable part. Ramco Innovations - 1207 Maple Street, West Des Moines IA USA 50265 - 800-280-6933 - www.ramcoinnovations.com 335 EQ-500 20 28 1.102 0.787 27 1.063 Amplifier Built-in RT-610 PX-2 18 0.709 CX-400: 17.6 0.693 t 2 t 0.079 Assembly dimensions with EX-40 series (Mounting part only) 11.8 0.465 20 0.787 M4 hexagonsocket-head bolt t 2 t 0.079 45 33 25 1.299 0.984 2-M3 (length 18 mm 0.709 in) screws with washers 2-M4 2-M3 25 40 50 0.984 1.575 1.969 Assembly dimensions with EQ-20 series (Mounting part only) 11.8 0.465 20 0.787 6 0.236 22 0.866 Sensor Mounting Stand MS-AJ 2-M3 (length 14 mm 0.551 in) screws with washers Center of sensing 17 0.669 Micro 24 0.945 CX-400: 23.2 0.913 11.8 0.465 20 0.787 6 0.236 11.8 0.465 Assembly for reflector CY MS-AJ1-M Basic assembly Multi-voltage VF MS-AJ1 MS-AJ2 PHOTOELECTRIC SENSORS MS-AJ DIMENSIONS (Unit: mm in) MS-AJ1-M MS-AJ2-M Assembly for reflector CY Assembly dimensions with RF-220 (Reflector) (Mounting part only) 55.3 2.177 38 1.496 12 0.472 PX-2 Amplifier Built-in 11.8 0.465 20 0.787 RT-610 MS-AJ Sensor Mounting Stand M4 hexagon-sockethead bolt t2 t 0.079 45 50.3 1.980 45 28.45 1.120 2-M4 (length 8 mm 0.315 in) screws with washers 210 8.268 (134)(5.276)(Note 1) 4.2 "10 "0.394 pipe 0.165 [Stainless steel (SUS304)] 12 0.472 (33) (1.299) 2-3.2 0.1264.2 0.165 oblong holes 33 1.299 "10 "0.394 pipe [Stainless steel (SUS304)] 18 0.709 (44.5) (1.752) 8 0.315 4.2 28 1.102 0.165 36.3 20 1.429 0.787 (16.5) (0.650) Sensor mounting bracket [Stainless steel (SUS304)] (Note 2) Arm joint 2-"3.2 "0.126 mounting holes (Nylon 6) (147) (5.787) (Note 1) 28 1.102 37 1.457 61.3 2.413 Lateral arm assembly Cable guide (POM) (218) (8.583) 45 4.2 28 1.102 0.165 36.3 20 1.429 0.787 28 1.102 45.3 1.783 6 0.236 PM 71.3 2.807 47 1.850 20 0.787 35.3 1.390 2-M3 (length 8 mm 0.315 in) screws with washers 16.5 0.650 Micro 11.8 0.465 M4 hexagon-sockethead bolt t2 t 0.079 45 50 1.969 MS-AJ1-A PM2 Assembly dimensions with RF-230 (Reflector) (Mounting part only) 20 0.787 45 1.772 (203.5) (8.012) Base (PA) 25.5 1.004 Two M3 (length 14 mm 0.551 in) screws with washers, two M3 (length 16 mm 0.630 in) screws with washers, two M3 (length 18 mm 0.709 in) screws with washers, one auxiliary mounting plate for EQ-20 series and one auxiliary mounting plate for EX-40 series are attached. 32 10 1.260 0.394 2-"6.6 "0.260 mounting holes NX5 Notes: 1) The dimensions in the brackets indicate the adjustable range of the movable part. Notes: 2) Refer to MS-AJ1/AJ2 (basic assembly) for the assembly diagram with the sensor mounting bracket, sensor or reflector. MS-AJ2-A 16.5 0.650 28.45 1.120 12 0.472 Cable guide (POM) (147) (5.787) (Note 1) (210) (8.268) 32 1.260 46 1.811 20 0.787 15 8 0.591 0.315 (33) (1.299) (16.5) (0.650) 33 1.299 Sensor mounting bracket [Stainless steel (SUS304)] (Note 2) Arm joint 2-"3.2 "0.126 mounting holes (Nylon 6) "10 "0.394 pipe [Stainless steel (SUS304)] 10 0.394 (36.5) (1.437) 20 0.787 31 1.220 210 8.268 (134)(5.276)(Note 1) 4.2 "10 "0.394 pipe 0.165 [Stainless steel (SUS304)] 2-3.2 0.1264.2 0.165 oblong holes Base (PA) EQ-500 VF Multi-voltage 6 0.236 Lateral arm assembly 2-"6.6 "0.260 mounting holes (208.5) (8.209) 24.5 0.965 Two M3 (length 14 mm 0.551 in) screws with washers, two M3 (length 16 mm 0.630 in) screws with washers, two M3 (length 18 mm 0.709 in) screws with washers, one auxiliary mounting plate for EQ-20 series and one auxiliary mounting plate for EX-40 series are attached. Notes: 1) The dimensions in the brackets indicate the adjustable range of the movable part. Notes: 2) Refer to MS-AJ1/AJ2 (basic assembly) for the assembly diagram with the sensor mounting bracket, sensor or reflector. 336 Ramco Innovations - 1207 Maple Street, West Des Moines IA USA 50265 - 800-280-6933 - www.ramcoinnovations.com PHOTOELECTRIC SENSORS MS-AJ DIMENSIONS (Unit: mm in) "10 "0.394 pipe [Stainless steel (SUS304)] 7 0.276 6 0.236 9 0.354 25.5 1.004 (203.5) (8.012) Base (Note 2) (PA) Notes: 1) The dimensions in the brackets indicate the adjustable range of the movable part. Notes: 2) Refer to MS-AJ (basic assembly) for the assembly diagram with the base. 28.45 1.120 16.5 0.650 6 0.236 210 8.268 (134)(5.276)(Note1) "10 "0.394 pipe [Stainless steel (SUS304)] 12 0.472 (33) (1.299) (147) (5.787) (Note1) Base (Note 2) (PA) 4-M30.5 0.020 mounting holes (16.5) (0.650) 20 0.787 CY t2 t 0.079 33 1.299 41.5 1.634 25 0.984 20 0.787 "10 "0.394 pipe [Stainless steel (SUS304)] 4 0.157 8 0.315 t2 t 0.079 33 1.299 21 0.827 1.5 0.059 4.5 0.177 24.5 0.965 31 1.220 15 8 0.591 0.315 55 Opposing faces10 0.394, 35 2.165 thickness 2 0.079 1.378 (45) (1.772) (28.5) (1.122) 15 0.591 22 0.866 23.5 0.925 5 0.197 "3.5 "0.138 (10) (0.394) Toothed lock washer "11 "0.433 Note: The above diagram is in case of M6 threaded head fiber. EQ-500 Notes: 1) The dimensions in the brackets indicate the adjustable range of the movable part. Notes: 2) Refer to MS-AJ (basic assembly) for the assembly diagram with the base. 22 0.866 M60.75 0.030 10 0.394 (208.5) 2-"6.6 "0.260 (8.209) mounting holes 55 2.165 6.5 41.5 0.256 1.634 31 1.220 16 0.630 22 0.866 22 0.866 Assembly dimensions with FD-FM2 (Mounting part only) Arm joint (Nylon 6) (36.5) (1.437) 32 1.260 46 1.811 20 0.787 4 4 0.157 0.157 13 0.512 13 "4 "0.157 0.512 mounting hole Assembly dimensions with FD-L51 (Mounting part only) 33 1.299 Fiber mounting bracket [Stainless steel (SUS304)] 20 0.787 8 0.315 3.2 0.126 35 1.378 55 2.165 Assembly for fiber Cable guide (POM) (210) (8.268) 13.5 0.531 18.5 0.728 22 0.866 Material: Stainless steel (SUS304) 32 10 1.260 0.394 2-"6.6 "0.260 mounting holes MS-AJ2-F 8 0.315 5.5 0.217 PM 25.5 1.004 22 0.866 40 PM2 20 8 0.787 0.315 45 1.772 R14 R0.551 13 0.512 18 0.709 (44.5) (1.752) 28 1.102 M3 threaded head fiber mounting hole M4 threaded head fiber mounting hole M6 threaded head fiber mounting hole 2-M30.5 0.02 4-M30.5 0.020 4.2 8 3.2 0.126 0.165 0.315 Arm joint (Nylon 6) NX5 (218) (8.583) 4-M30.5 0.020 mounting holes t2 t 0.079 33 1.299 Fiber mounting bracket [Stainless steel (SUS304)] (147) (5.787) (Note1) (16.5) (0.650) Amplifier Built-in RT-610 PX-2 Cable guide (POM) Fiber mounting bracket / MS-FD-1 (33) (1.299) Sensor Mounting Stand MS-AJ 6 0.236 210 8.268 (134)(5.276)(Note1) "10 "0.394 pipe [Stainless steel (SUS304)] 12 0.472 Assembly for fiber Micro 28.45 1.120 16.5 0.650 MS-AJ1-F MS-AJ2-F Assembly for fiber Multi-voltage VF MS-AJ1-F Ramco Innovations - 1207 Maple Street, West Des Moines IA USA 50265 - 800-280-6933 - www.ramcoinnovations.com 337