MS-DP-5

747 FIBER SENSORS Compact Size Digital Pressure Sensor DP4 SERIES Related Information ■■General terms and conditions............ F-17 ■■Glossary of terms........................ P.1373~ For Gas ■■Sensor selection guide.................. P.661~ ■■General precautions...................... P.1405 LASER SENSORS PHOTOELECTRIC SENSORS Conforming to EMC Directive MICRO PHOTOELECTRIC SENSORS Recognition AREA SENSORS LIGHT CURTAINS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS * Passed the UL 991 Environment Test PARTICULAR USE SENSORS * UL 61010C-1 compatible, Passed the UL 991 Environment Test based on SEMI S2-0200. [Category applicable for semiconductor manufacturing: TWW2, Process Equipment] [Applicable standards: UL 61010C-1] [Additional test / evaluation standards as per intended use: UL 991, SEMI S2-0200] SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS panasonic-electric-works.net/sunx Digital STATIC CONTROL DEVICES ENDOSCOPE LASER MARKERS PLC / TERMINALS HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS New shape makes it most suitable for panel mounting Can be mounted on a DIN rail Can be mounted closely The sensor can be mounted even on a 35 mm 1.378 in width DIN rail by using the optional DIN rail mounting bracket (MS-DP-2). It can be mounted in a narrow space inside of your device. Even when you use more than one sensor at the same time, you can mount them close together in one hole to save both space and man-hours. Mountable from four different directions MACHINE VISION SYSTEMS UV CURING SYSTEMS Flow DP4 40 mm 1.575 in 60 mm 2.362 in MS-DP-2 Supplied with a simple-to-mount panel mounting bracket Selection Guide Pressure/ Digital Display Pressure/ Head-separated Other Products Automatic sensitivity setting A panel mounting bracket MS-DP-1 is enclosed to enable simple mounting of the sensor onto the panel surface, thus contributing to the total cost reduction. Light-weight, compact design A compact form specifically designed for mounting on an equipment panel. It only uses half the space of our conventional product and provides the light weight of just 30 g (cables excluded). Panel mounting bracket MS-DP-1 Accessory The bracket is suitable for a panel with a thickness of 1 to 6 mm  0.035 to 0.236 in. *T  he panel mounting bracket MS-DP-5 (optional) enabling the sensors to be attached to each other laterally is available. 40 mm 1.575 in 20 mm 0.787 in Incorporated with the memory bank function You can store two patterns of set values. Hence, the setup can be changed by a single touch. Compact Size Digital Pressure Sensor DP4 SERIES APPLICATIONS 748 FIBER SENSORS Checking IC absorption Checking degree of vacuum for vacuum molding Checking reference pressure of device LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS DP4-50 LIGHT CURTAINS DP4-50 DP4-52 PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS ORDER GUIDE –101 kPa type ±100 kPa type 0 to 1.000 MPa Compound pressure 0 to –101.3 kPa 1 MPa type Rated pressure range (Note) Vacuum pressure Appearance Positive pressure Type SENSOR OPTIONS • MS-DP-1 (Panel mounting bracket) Pressure port Output DP4-50 NPN open-collector transistor DP4-50P PNP open-collector transistor DP4-52 SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES NPN open-collector transistor ENDOSCOPE DP4-52P PNP open-collector transistor LASER MARKERS DP4-57 NPN open-collector transistor M5 female thread –100.0 to 100.0 kPa Note: The rated pressure range indicates the range for full product performance. Accessory Model No. DP4-57P PNP open-collector transistor PLC / TERMINALS HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS Selection Guide Pressure/ Digital Display Pressure/ Head-separated Flow Other Products DP4 749 FIBER SENSORS Compact Size Digital Pressure Sensor DP4 SERIES OPTIONS LASER SENSORS PHOTOELECTRIC SENSORS Designation MICRO PHOTOELECTRIC SENSORS Connector AREA SENSORS Connector attached cable LIGHT CURTAINS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS Model No. Connector Description • CN-63 Connector pin CN-63 Set of 10 housings and 30 connector pins CN-63-C2 Length: 2 m 6.562 ft CN-63-C5 Length: 5 m 16.404 ft MS-DP-2 For installation to 35 mm 1.378 in width DIN rail MS-DP-3 Vertical mounting bracket MS-DP-4 Horizontal mounting bracket MS-DP-5 Enables the sensors to be attached to each other laterally and mounted on the panel. WIRE-SAVING SYSTEMS 3 DIN rail mounting bracket Sensor mounting bracket Horizontal multiple panel mounting bracket 2 • MS-DP-2 Sensor mounting bracket • MS-DP-5 • MS-DP-3 Panel fixing screw (Accessory) ENDOSCOPE LASER MARKERS PLC / TERMINALS HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS Selection Guide Pressure/ Digital Display Pressure/ Head-separated Flow Other Products DP4 MS-DP-5 * The above illustration shows two units connected in sequence. Housing 3 2 1 DIN rail mounting bracket Horizontal multiple panel mounting bracket MEASUREMENT SENSORS STATIC CONTROL DEVICES • CN-63-C2 • CN-63-C5 1 0.2 mm2 3-core cabtyre cable with connector Cable outer diameter: ø3.8 mm ø0.150 in SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS Connector attached cable • MS-DP-4 Label space Designed with a 9 mm 0.354 in label space to enable the labeling of the sensors with a label printer (9 mm 0.354 in width) for sensor number and application data. Compact Size Digital Pressure Sensor DP4 SERIES SPECIFICATIONS Type Item Model No. FIBER SENSORS Vacuum pressure Positive pressure Compound pressure –101 kPa type 1 MPa type ±100 kPa type NPN output PNP output NPN output PNP output NPN output PNP output DP4-50 DP4-50P DP4-52 DP4-52P DP4-57 DP4-57P Type of pressure Rated pressure range Set pressure range Pressure withstandability Gauge pressure 0 to –101.3 kPa 0 to 1.000 MPa –100.0 to 100.0 kPa 5.1 to –101.3 kPa 0.052 to –1.033 kgf/cm2, 0.051 to –1.013 bar 0.74 to –14.70 psi, 38 to –760 mmHg 1.5 to –29.9 inHg –0.050 to 1.050 MPa –0.51 to 10.71 kgf/cm2 –0.50 to 10.50 bar –7.2 to 152.2 psi –101.3 to 105.0 kPa –1.033 to 1.071 kgf/cm2 –1.013 to 1.050 bar –14.68 to 15.22 psi 490 kPa 1.470 MPa 490 kPa Applicable fluid Non-corrosive gas Hysteresis Repeatability Within ±0.2 % F.S. ± 1 digit (within ±3 digits) +10 NPN open-collector transistor PNP open-collector transistor • Maximum sink current: 100 mA • Maximum source current: 100 mA • Applied voltage: 30 V DC or less (between output and 0 V) • Applied voltage: Same as supply voltage (between output and +V) • Residual voltage: 1 V or less (at 100 mA sink current) • Residual voltage: 2 V or less (at 100 mA source current) 0.4 V or less (at 16 mA sink current) DC-12 or DC-13 Output operation Display Displayable pressure range Equipped with 4 types of modes: Hysteresis mode, window comparator mode, automatic sensitivity setting mode, forced output mode (selectable by key operation) 2 ms, 16 ms, 128 ms, 512 ms or less (selectable by key operation) 3 1/2 digit LCD display (with red and green backlight) (Sampling rate: 256 ms, 512 ms, 1,024 ms selectable by key operation) 5.1 to –101.3 kPa 0.052 to –1.033 kgf/cm2, 0.051 to –1.013 bar 0.74 to –14.70 psi, 38 to –760 mmHg 1.5 to –29.9 inHg –0.050 to 1.050 MPa –0.51 to 10.71 kgf/cm2 –0.50 to 10.50 bar –7.2 to 152.2 psi –101.3 to 105.0 kPa –1.033 to 1.071 kgf/cm2 –1.013 to 1.050 bar –14.68 to 15.22 psi Operation display LCD segment is red when the output is ON, and green when the output is OFF Environmental resistance Ambient temperature Ambient humidity EMC Voltage withstandability 3 (Industrial environment) 0 to +50 °C +32 to +122 °F (No dew condensation), Storage: –10 to +60 °C +14 to +140 °F Over ambient temperature range +10 to +40 °C +50 to +104 °F: within ±2 % F.S. of detected pressure at +25 °C +77 °F Over ambient temperature range 0 to +50 °C +32 to +122 °F: within ±5 % F.S. of detected pressure at +25 °C +77 °F Suitable cable Weight Accessories LASER MARKERS HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS Pressure/ Head-separated Temperature characteristics Wire material STATIC CONTROL DEVICES 1,000 V AC for one min. between all supply terminals connected together and enclosure 100 m/s2 acceleration (10 G approx.) in X, Y and Z directions for three times each Cable length MEASUREMENT SENSORS Pressure/ Digital Display Shock resistance Lead wire diameter WIRE-SAVING SYSTEMS EN 61000-6-2, EN 61000-6-4 10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude, in X, Y and Z directions for two hours each Conductor cross-section area SENSOR OPTIONS Selection Guide 50 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure Connecting method INDUCTIVE PROXIMITY SENSORS 35 to 85 % RH, Storage: 35 to 85 % RH Vibration resistance Material PRESSURE / FLOW SENSORS IP40 (IEC) Insulation resistance Pressure port LIGHT CURTAINS PLC / TERMINALS Incorporated Bar display in steps of 14 % F.S. approx. Protection AREA SENSORS ENDOSCOPE Analog bar display Pollution degree MICRO PHOTOELECTRIC SENSORS NO / NC (selectable by key operation) Short-circuit protection Response time PHOTOELECTRIC SENSORS SIMPLE WIRE-SAVING UNITS 40 mA or less Utilization category Output modes Within ±0.2 % F.S. ± 2 digits (within ±6 digits) 12 to 24 V DC –15 %   Ripple P-P 10 % or less Current consumption LASER SENSORS PARTICULAR USE SENSORS 1 digit (however, variable in hysteresis mode) Supply voltage Output 750 M5 female thread Front case: ABS, LCD display: PET, Rear case: PBT [M5 threaded part: Brass (nickel plated)] Connector 0.16 to 0.32 mm2 (AWG#25 to #22) (Note 2) ø1.2 to ø1.8 mm ø0.047 to ø0.071 in Tin plated, soft, twisted copper wire Total length up to 100 m 328.084 ft (less than 10 m 32.808 ft when conforming to CE marking) is possible with 0.3 mm2, or more, cable. Net weight: 30 g approx. Panel mounting bracket (MS-DP-1): 1 set, Pressure unit label: 1 pc. Connector: 1 set (Housing: 1 pc., Connector pin: 3 pcs.) Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 °F. 2) If the wiring is longer than 5 m 16.404 ft, use a cable with a diameter of 0.3 mm2 or more. Flow Other Products DP4 751 Compact Size Digital Pressure Sensor I/O CIRCUIT AND WIRING DIAGRAMS FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS DP4-5□ Color code of connector attached cable D 3 (Brown) +V Load 2 Tr ZD 1 12 to 24 V DC +10 % –15 – (Blue) 0 V Internal circuit INDUCTIVE PROXIMITY SENSORS + (Black) Output 100 mA max. PRESSURE / FLOW SENSORS PARTICULAR USE SENSORS Terminal arrangement diagram Terminal No. Sensor circuit LIGHT CURTAINS NPN output type I/O circuit diagram MICRO PHOTOELECTRIC SENSORS AREA SENSORS DP4 SERIES 0V Users’ circuit Output +V Symbols … D : Reverse supply polarity protection diode ZD: Surge absorption zener diode Tr : NPN output transistor SENSOR OPTIONS DP4-5□P PNP output type I/O circuit diagram Terminal arrangement diagram WIRE-SAVING SYSTEMS Terminal No. Color code of connector attached cable MEASUREMENT SENSORS ENDOSCOPE Sensor circuit STATIC CONTROL DEVICES D ZD Tr HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS 100 mA max. 2 + (Black) Output 12 to 24 V DC +10 % –15 – Load 1 LASER MARKERS PLC / TERMINALS 3 (Brown) +V (Blue) 0 V Internal circuit 0V Users’ circuit PRECAUTIONS FOR PROPER USE • Never use this product as a sensing device for personnel protection. • In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. • The DP4 series is designed for use with noncorrosive gas. It cannot be used with liquid or corrosive gas. UV CURING SYSTEMS Selection Guide Pressure/ Digital Display Pressure/ Head-separated Refer to General precautions. Description 1 Functional description 1 Increment key (UP) 3 Decrement key (DOWN) 4 • In the pressure setting mode, pressing the key changes the setting item. In addition, if pressed for 4 sec., or more, in Set Value 1 (P-1) or Set Value 4 (P-4) setting mode, the setting mode will change to either Set Value 4 (P-4) or Set Value 1 (P-1) setting mode. Mode selection • In the sensing mode, pressing the key continuously for key 4 sec., or more, can set / cancel the key-protect. (MODE) • In the sensing mode, pressing both lncrement key and Mode selection key simultaneously changes the mode to the initial setting mode. Whereas, pressing both Decrement key and Mode selection key simultaneously changes the mode to the supplementary setting mode. 2 4 3 UP DP4 MODE –101.3kPa DOWN • In the initial setting mode and supplementary setting mode, pressing the key changes the setting item. • In the pressure value setting mode, pressing the key changes the set value. • In the sensing mode, pressing the key continuously for 4 sec., or more, displays the peak hold value. • In the initial setting mode and supplementary setting mode, pressing the key changes the set conditions. • In the pressure value setting mode, pressing the key changes the set value. • In the sensing mode, pressing the key continuously for 4 sec., or more, displays the bottom hold value. 2 Operation • If setting is impossible even with pressing the MODE key, verify whether the key-protect function is enabled. Please note that pressing down on the MODE key for an extended moment will enable the key-protect function as soon as the key is released. • If using the window comparator mode, set the pressure value so that there is a difference of 3 digits, or more, between Set Value 1 (P-1) and Set Value 2 (P-2). No output will be possible with a 0 to 2 digit difference. Function 3 1 /2 digit LCD display Displays measured pressure, settings, error with red and green messages and key-protect status. Red display when output is ON. backlight Green display when output is OFF. Flow DP4 +V Symbols … D : Reverse supply polarity protection diode ZD: Surge absorption zener diode Tr : PNP output transistor MACHINE VISION SYSTEMS Other Products Output In the sensing mode, if both keys are simultaneously pressed continuously, zero-point adjustment is done. SIMPLE WIRE-SAVING UNITS Compact Size Digital Pressure Sensor PRECAUTIONS FOR PROPER USE Conditions in use for CE conformity • The DP4 series is a CE conformity product complying with EMC Directive. The harmonized standard with regard to immunity that applies to this product is EN 61000-6-2 and the following condition must be met to conform to that standard. Conditions • The sensor should be connected less than 10 m 32.808 ft from the power supply. • The signal line to connect with this sensor should be less than 30 m 98.425 ft. Setting • The conditions which are set are stored in an EEPROM. Kindly note that the EEPROM has a life span and its guaranteed life is 100,000 write operation cycles. Forced output mode • In the initial setting mode, if the output mode is set to the forced output mode ( ), the output is forcibly maintained at OFF level in the sensing mode, irrespective of Set Value 1 to 3 (P-1 to P-3). Further, if the keys are operated as per the procedure given below, the output can be forcibly switched either ON or OFF without applying pressure at the pressure port. This is convenient for an operation check of the comparative output or for an inspection before commencing work. The diagram below appears when the DP4-50(P) has been used to set the display to “Digital display” (  )  UP DP4 MODE –101.3kPa DOWN • In the sensing mode, press MODE key to change to the forced output mode. • Whenever UP key is pressed, the output state switches to either ON and OFF alternately. • Press MODE key to return to the sensing mode. • Output is kept off at the point where the mode is changed from another output mode to forced output control mode ( ). • Even if output has been set to stay on during forced output control mode, it will be forcibly changed to off at the point where the mode changes back to sensing mode. UP DP4 MODE –101.3kPa DOWN • If the MODE key is pressed in a sensing mode other than forced output mode, the mode will change to pressure value setting mode. • After releasing the MODE key, press the MODE key again continuously until is displayed (4 sec. or more). • Make the setting for Set Values 4 to 6 (P-4 to P-6). Set Values 4 to 6 (P-4 to P-6) correspond to Set Values 1 to 3 (P-1 to P-3) respectively. Peak hold & bottom hold functions • Peak hold and bottom hold functions enable the display of the peak value (maximum pressure value) and the bottom value (minimum pressure value) of the varying measured pressure. These functions are convenient for finding the pressure variation range or for determining the reference for pressure settings. • Please note that the peak value and the bottom value data is erased when it is no longer displayed. 752 Refer to General precautions. Key-protect function • Key-protect is a function which prevents any unintentional change in the conditions which have been entered in each setting mode by making the sensor not to respond to the key operations. • Since the key-protect information is stored in an EEPROM, it is not erased even if the power supply is switched off. • Please take care to remember if the key-protect function has been set. • When the keys are to be operated, make sure that keyprotect is released. FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS LIGHT CURTAINS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS Piping • When connecting a commercial M5 coupling to the pressure port, hold the flat sides of the pressure port with a 13 mm 0.512 in spanner and make sure that the tightening torque is 1 N·m or less. If excessive tightening torque is applied, the commercial fitting may break. 13 mm 0.512 in spanner SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES ENDOSCOPE LASER MARKERS PLC / TERMINALS Mounting • Install the enclosed panel mounting bracket (MS-DP-1) as shown in the figure below. The tightening torque should be 0.15 N·m or less. Further, tighten both the right and the left screw gradually and equally, so that the panel mounting bracket does not tilt. HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS M3 (length 15 mm 0.591 in) panel fixing screw (Accessory) Memory bank function • The memory bank function is a function which allows two types of output to be stored: Set Values 1 to 3 (P-1 to P-3) and Set Values 4 to 6 (P-4 to P-6). This make it possible to change set values quickly. DP4 SERIES Panel mounting bracket (MS-DP-1)(Accessory) Others • Use within the rated pressure range. • Do not apply pressure exceeding the pressure withstandability value. The diaphragm will get damaged and correct operation shall not be maintained. • Do not use during the initial transient time (3 sec. approx.) after the power supply is switched on. • Avoid dust, dirt, and steam. • Take care that the sensor does not come in direct contact with water, oil, grease, or organic solvents, such as, thinner, etc. • Do not insert wires, etc., into the pressure port. The diaphragm will get damaged and correct operation shall not be maintained. • Do not operate the keys with pointed or sharp objects. Selection Guide Pressure/ Digital Display Pressure/ Head-separated Flow Other Products DP4 753 FIBER SENSORS LASER SENSORS Compact Size Digital Pressure Sensor DP4 SERIES DIMENSIONS (Unit: mm in) The CAD data in the dimensions can be downloaded from our website. DP4-5□(P) PHOTOELECTRIC SENSORS Sensor MICRO PHOTOELECTRIC SENSORS 7 0.276 40 1.575 3 1/2 digit LCD display (Green and red) Increment key UP AREA SENSORS MODE LIGHT CURTAINS Mode selection key DOWN 42 1.654 29 1.142 36.5 1.437 (5) (0.197) 20 0.787 M5 female thread Decrement key Connector PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS MS-DP-2 DIN rail mounting bracket (Optional) WIRE-SAVING SYSTEMS Assembly dimensions MEASUREMENT SENSORS Variable range STATIC CONTROL DEVICES 40 1.575 2 0.079 (10) (0.394) 2-ø4.5 ø0.177 mounting holes 42 1.654 9 0.354 ENDOSCOPE LASER MARKERS PLC / TERMINALS HUMAN MACHINE INTERFACES 6 0.236 20 0.787 UP MODE DOWN 15 0.591 49 1.929 2-ø4.5 ø0.177 mounting holes 13 0.512 20 0.787 ENERGY CONSUMPTION VISUALIZATION COMPONENTS 52 40 1.575 2.047 9 0.354 40 1.575 52 2.047 Suitable for 35 mm 1.378 in width DIN rail 3 0.118 FA COMPONENTS 6 0.236 Variable range (10) (0.394) 15 0.591 13 0.512 40 1.575 MACHINE VISION SYSTEMS UP MODE DOWN UV CURING SYSTEMS 35 1.378 MS-DP-1 Selection Guide Pressure/ Digital Display 3 0.118 20 0.787 2.9 0.114 Panel mounting bracket (Accessory) Assembly dimensions Panel cut-out dimensions 56 2.205 49 1.929 40 1.575 Pressure/ Head-separated Flow Other Products DP4 Suitable for 35 mm 1.378 in width DIN rail (21.55) 20 13.9 (0.848) 0.787 0.547 60 2.362 +0.5 17 0 0.669 +0.020 0 UP MODE +0.5 DOWN 37 0 1.457 + 0.020 0 +0.5 7 0.276 42 1.654 37 0 1.457 +0.020 0 X +0.5 0 X +0.020 0 Panel fixing screw Material: POM Two M3 (length 15 mm 0.591 in) screws for fitting are attached. X when “n” unit is installed X = 20 × (n –1) + 17 mm X = 0.787 × (n –1) + 0.669 in Note: The panel thickness should be 1 to 6 mm 0.039 to 0.236 in. Compact Size Digital Pressure Sensor DIMENSIONS (Unit: mm in) DP4 SERIES 754 The CAD data in the dimensions can be downloaded from our website. MS-DP-5 Panel mounting bracket (Optional) FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS Assembly dimensions MICRO PHOTOELECTRIC SENSORS AREA SENSORS Panel LIGHT CURTAINS 7 0.276 40 1.575 PRESSURE / FLOW SENSORS 30 1.181 5 0.197 42 1.654 INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS 28.3 1.114 UP 35.3 20 1.390 0.787 MODE DOWN Applicable panel thickness dimensions t = 1 to 6 mm t = 0.039 to 0.236 in SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS Panel fixing screw WIRE-SAVING SYSTEMS Panel cut-out dimensions 37 +0.5 0 1.457 +0.020 MEASUREMENT SENSORS +0.020 X +0.5 0 0 0 17 +0.5 0 0.669 +0.020 0 +0.5 17 0 0.669 +0.020 0 X when “n” unit is installed X = 40 × (n – 1) + 37 mm X = 1.575 × (n – 1) + 1.457 in (n = 12 or less) When installed laterally in sequence. 40 1.575 or more Note: The panel thickness should be 1 to 6 mm 0.039 to 0.236 in. When installing individually MS-DP-3 Sensor mounting bracket (Optional) MS-DP-4 Sensor mounting bracket (Optional) 19.75 0.778 12 0.472 t2 t 0.079 37 1.457 R16 R0.630 36.5 1.437 PLC / TERMINALS HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS t2 t 0.079 Connector (Optional) CN-63-C2  CN-63-C5 (2.3) (0.091) Mating connector Connector pin: BXA-001T-P0.6 manufactured by J.S.T Mfg. Co., Ltd. Housing: XAP-03V-1 manufactured by J.S.T Mfg. Co., Ltd. Crimping tool YC-692R manufactured by J.S.T Mfg. Co., Ltd. Pressure/ Head-separated Connector attached cable (Optional) 2,000 78.740 (CN-63-C5: 5,000 196.850) (9.5) (0.374) (6.5) (0.256) Pressure/ Digital Display 4.5 0.177 Note: Use with the panel mounting bracket (MS-DP-1) included with the sensor. (1.9) (0.075) (6.9) (0.272) ø4.5 ø0.177 mounting holes Material: Cold rolled carbon steel (SPCC)(Nickel plated) (5.0) (0.197) UV CURING SYSTEMS Selection Guide 30° (9.8) (0.386) (9.5) (0.374) 30 1.181 16 0.630 17 28 0.669 1.102 6 0.236 Note: Use with the panel mounting bracket (MS-DP-1) included with the sensor. 65 2.559 17 41 0.669 1.614 Material: Cold rolled carbon steel (SPCC)(Nickel plated) CN-63 LASER MARKERS MACHINE VISION SYSTEMS 24 0.945 57 2.244 37 1.457 ENDOSCOPE FA COMPONENTS 57 2.244 40 1.575 2-ø4.5 ø0.177 mounting holes STATIC CONTROL DEVICES (8.3) (0.327) (5.8) (0.228) XAP-03V-1 manufactured by J.S.T Mfg. Co., Ltd. Flow Other Products DP4 (50) (1.969) (8) (0.315) ø3.8 ø0.150 cable