MS-SFC-2

NEW Type 2 PLc SIL1 Ultra-slim LIGHT CURTAIN SF2C SERIES Conforming to Machine & EMC Directive Certified Certified by NRTL Conforming to OSHA / ANSI Introducing Type 2 Ultra-slim Light Curtains! Featuring easy installation and reduced wiring Large built-in multi-purpose indicators Includes a large indicator that supports an extensive range of applications via external input. 13.2mm Smart equipment SF2C (with mounting bracket) *The picture is an image. 2013.05 panasonic.net/id/pidsx/global Dramatically less wiring work Slim size for efficient applications Light curtain wiring consists of just five wires each for the emitter and receiver, allowing you to easily implement safety measures in about the same amount of time as with an area sensor. Available work space is expanded from the previous model, and productivity is improved. SF4C Series (Type4) Receiver SF2C Series (Type2) Emitter Receiver Emitter Usable work space approx. 12 % UP (60 mm 2.362 in) Emitter 5 wires Emitter 12 wires Gray cable Gray cable Receiver 12 wires Gray cable (with black line) If the machine opening is 500 mm 19.685 in Previous SF2C Series Functions with just six wires (two each 0 V and 24 V and one each OSSD and SSD output)! Gray cable (with black line) Usable work space Usable work space 95 % (474 mm 18.661 in approx.) 83 % (414 mm 16.299 in) Receiver 5 wires 13.2 mm 0.520 in (including mounting bracket) 43 mm 1.693 in 43 mm (including mounting bracket) 1.693 in Note: Requires a safety circuit architecture that complies with the desired control category implemented using either an SF-C13 Control Unit, a safety relay, or other equipment. 13.2 mm 0.520 in If the machine opening width is 500 mm 19.685 in If the machine opening width is 500 mm 19.685 in ORDER GUIDE Light curtains Hand protection type Model No. (Note 2) Operating range No. of beam Protective height (Note 1) (mm in) PNP output type NPN output type Channels 8 160 6.299 SF2C-H8-P SF2C-H8-N 12 240 9.449 SF2C-H12-P SF2C-H12-N 16 320 12.598 SF2C-H16-P SF2C-H16-N 20 400 15.748 SF2C-H20-P SF2C-H20-N 0.1 to 3m 24 480 18.898 SF2C-H24-P SF2C-H24-N 0.328 to 9.843 in 28 560 22.047 SF2C-H28-P SF2C-H28-N 32 640 25.197 SF2C-H32-P SF2C-H32-N Appearance Min. sensing object ø25 mm ø0.984 in (20 mm 0.787 in beam pitch) Type 10 mm 0.394 in Beam channel No. Protective height Beam pitch 10 mm 20 mm 0.787 in 0.394 in 0.1m 0.328 ft Actual operating range of the light curtain 3m 9.843 ft Setting range of the receiver Receiver cannot be placed in this range Emitter Receiver Receiver Notes: 1) The operating range is the possible setting distance between the emitter and the receiver. 2) The model No. with suffix “E” shown on the label affixed to the product is the emitter, “D” shown on the label is the receiver. Spare parts (Accessories for light curtain) Standard mounting bracket ・ MS-SFC-1 Designation Model No. Description Standard mounting bracket MS-SFC-1 Allows the light curtain to be mounted at the rear with one M5 hexagon-socket-head bolt. Mounting direction of the bracket can be selected between vertical or horizontal (no dead zone). (4 pcs. per set for emitter and receiver) Min. sensing object for regular checking (ø25 mm ø0.984 in) SF4C-TR25 Test rod ø25 Light curtain Light curtain Four bracket set Four M3 (length: 4 mm 0.157 in) countersunk screws OPTIONS M5 hexagon-socket-head bolt ( Purchase separately. ) Standard mounting bracket MS-SFC-1 (Accessory) M3 (length: 4 mm 0.157 in) countersunk screw with loose-proof agent Mounting bracket Designation Model No. Description NA2-N compatible mounting bracket MS-SFC-2 Used when changing over area sensor NA2-N series to the SF2C series. The mounting holes of NA2-N series can continue to be used. Center mounting by a M6 hexagon-socket-head bolt is also possible. (4 pcs. per set for emitter and receiver) Versatile bracket MS-SFC-3 Two ways of mounting are possible. 1 Rear mounting which enables beam adjustment 2 Dead zoneless center mounting on aluminum frame (4 pcs. per set for emitter and receiver) Intermediate supporting bracket for versatile bracket MS-SFC-4 Used to support the light curtain in the middle. Be sure to purchase it when using MS-SFC-3 on SF2C-H28-P, SF2C-H28-N, SF2C-H32-P, SF2C-H32-N. (2 pcs. per set for emitter and receiver) Metal protection case Designation Applicable beam channels SF2C-H□ 8 12 16 20 24 28 32 ・ MS-SFCH-8 Metal protection case (2 pcs. per set for emitter and receiver) Model No. MS-SFCH-8 MS-SFCH-12 MS-SFCH-16 MS-SFCH-20 MS-SFCH-24 MS-SFCH-28 MS-SFCH-32 ・ MS-SFCH-□ (Excluding MS-SFCH-8) Control unit Designation Appearance Model No. Slim type control unit SF-C13 Description Use a discrete wire cable to connect to the light curtain. Relay output. Compatible with up to control category 4 (control category 2 when used together with the SF2C series). Beam axis alignment made easy Simple Safety Distance Calculations The emitter has an effective aperture angle of ±5° or less for an operating range of 3 m 9.843 ft. Compared to Type 4 light curtains (which have an effective aperture angle of ±2.5° or less), the SF2C series is easy to align and install. The response time of all finger protection light curtains in the finger type is 20 ms or less. Recalculation of the safety distance is unnecessary for each time light curtain length is changed. Operating range 3m 9.843 ft Effective aperture angle Light weight! 5 ° or less The SF2C series is made of resin that is lighter than the conventional aluminum case type*. Its lightweight body eases the burden on the mounting surface of the equipment and contributes to overall reduced weight during equipment transportation or *Except the cable part overseas shipment. 5 ° or less Includes cables and mounting brackets The SF2C series includes cables (3 m 9.843 ft) for use with all models and standard mounting brackets (MS-SFC-1). Protection structure IP67 An IP67 (IEC) rating is achieved with an ultra-slim size for protection from environmental factors. SPECIFICATIONS Light curtain common specifications Type Model No. Item PNP output type SF2C-H□-P NPN output type SF2C-H□-N Operating range 0.1 to 3 m 0.328 to 9.843 ft Beam pitch 20 mm 0.787 in Min. sensing object ø25 mm ø0.984 in opaque object Effective aperture angle ±5° or less [for an operating range exceeding 3 m 9.843 ft (conforming to IEC 61496-2 / UL 61496-2)] Supply voltage 24 V DC ± 20 % Ripple P-P 10 % or less Control output (OSSD) Max. source current: 200 mA Operation mode Max. sink current: 200 mA ON when all beam channels are received, OFF when one or more beam channels are interrupted (OFF also in case of any malfunction in the light curtain or the synchronization signal) Protection circuit Incorporated Response time OFF response: 20 ms or less, ON response: 80 to 100 ms Lockout output (SSD) Max. source current: 60 mA Max. sink current: 60 mA Operation mode ON during normal operation, OFF during lockout (Note2) Protection circuit Incorporated Pollution degree 3 Operating altitude 2,000 m 6561.680 ft or less (Note3) IP65, IP67 （IEC） Environmental resistance Degree of protection Ambient temperature –10 to +55 °C +14 to +131 °F (No dew condensation or icing allowed), Storage: –25 to +60 °C –13 to +140 °F Ambient humidity 30 to 85 % RH, Storage: 30 to 85 % RH Emitting element Infrared LED (Peak emission wavelength: 850 nm 0.034 mil) 0.16 mm2 5-core heat-resistant PVC cable, 3 m 9.842 ft long Cable Material Enclosure: Polycarbonate alloy, Sensing surface: Polycarbonate alloy, MS-SFC-1 (Standard mounting bracket) : Stainless steel (SUS) MS-SFC-1 (Standard mounting bracket): 1 set, SF4C-TR25 (Test rod): 1 No. Accessories Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 °F. 2) If the emitter enters a lockout state, and light from the emitter enters the receiver, lockout information will be transmitted and lockout output (SSD) will turn OFF. 3) Do not use or storage in environment of more than atmospheric pressure at sea level. Light curtain individual specifications Model No. Type Item PNP output type NPN output type No. of beam channels Current consumption Protective height Min. sensing object ø25 mm ø0.984 in (20 mm 0.787 in beam pitch) SF2C-H8-P SF2C-H8-N SF2C-H12-P SF2C-H12-N SF2C-H16-P SF2C-H16-N SF2C-H20-P SF2C-H20-N SF2C-H24-P SF2C-H24-N SF2C-H28-P SF2C-H28-N SF2C-H32-P SF2C-H32-N 8 12 16 20 24 28 32 160 mm 6.299 in 240 mm 9.449 in 320 mm 12.598 in 400 mm 15.748 in 480 mm 18.898 in 560 mm 22.047 in 640 mm 25.197 in Large multi- purpose indicator lights off Emitter: 25 mA or less Receiver: 25 mA or less Large multi- purpose indicator lights up Emitter: 35 mA or less Emitter: 35 mA or less Emitter: 40 mA or less Emitter: 40 mA or less Emitter: 45 mA or less Emitter: 45 mA or less Emitter: 50 mA or less Receiver: 30 mA or less Receiver: 35 mA or less Receiver: 35 mA or less Receiver: 40 mA or less Receiver: 40 mA or less Receiver: 45 mA or less Receiver: 45 mA or less PFHD (Note) Emitter: 30 mA or less Receiver: 30 mA or less Emitter: 35 mA or less Receiver: 35 mA or less PNP output type 3.60×10–9 3.66×10–9 3.73×10–9 3.79×10–9 3.85×10–9 3.92×10–9 3.98×10–9 NPN output type 3.74×10–9 3.80×10–9 3.86×10–9 3.93×10–9 3.99×10–9 4.05×10–9 4.12×10–9 520 g approx. 580 g approx. 640 g approx. MTTFd (Note) Net weight (Total of emitter and receiver) 100 years or more 280 g approx. 340 g approx. 400 g approx. Note: PFHD; Probability of dangerous failure per hour, MTTFd; Mean time to dangerous failure. 460 g approx. I/O CIRCUIT AND WIRING DIAGRAMS Connection example Basic wiring: Min. operation only This is the general configuration using one set of the emitter and receiver facing each other. The control output (OSSD) turns OFF if the light is interrupted, while it automatically turns ON if receive the light. Receiver Emitter Receiver Emitter (Green) Interference prevention output (Green) Interference prevention output (Pink) Test input (Pink) Test input (Orange) Large multi-purpose indicator input (Orange) Large multi-purpose indicator input (Brown) +V (Brown) +V + (Blue) 0 V – – Gray Cable (White) Lockout output（SSD） (Black) Control output (OSSD) Gray Cable (with black line) 24V DC ±20% (Brown) +V (Brown) +V Gray Cable + (Blue) 0 V 24V DC ±20% K1(Note) (Blue) 0 V (White) Lockout output（SSD）Load (Black) Control output (OSSD) Load Gray Cable (with black line) K1(Note) (Blue) 0 V (Gray) Frequency setting input (Gray) Frequency setting input Note: Requires a safety circuit architecture that complies with the desired control category implemented using either an SF-C13 Control Unit, a safety relay, or other equipment. The CAD data in the dimensions can be downloaded from our website. Refer to our web site for the dimensions of mounting bracket etc. DIMENSIONS (Unit: mm in) SF2C-H□ Light curtain Mounting bracket assembly dimensions Mounting drawing for the light curtains using the standard mounting brackets MS-SFC-1 (accessory). 13.2 0.520 (7.7 0.303) t 2 t 0.079 30 10 0.394 1.181 13.2 0.520 (7.7 0.303) t 2 t 0.079 30 10 0.394 1.181 5.4 0.213 5.4 0.213 Display section Display section 13 0.512 (10.5 0.413) (62.75 2.470) (62.75 2.470) DCB A (88 3.465) (88 3.465) Large multi-purpose indicator Beam pitch DCB A Large multi-purpose indicator (88 3.465) Large multi-purpose indicator Beam pitch 20 0.787 16 10 0.394 0.630 16 10 0.394 0.630 ø3.7 Gray Cable Emitter Model No. SF2C-H8□ SF2C-H12□ SF2C-H16□ SF2C-H20□ SF2C-H24□ SF2C-H28□ SF2C-H32□ E ( 88) 1.181 ( 10.5 0.413 ( ) ) 88 3.465 A B Large multi-purpose indicator Large multi-purpose indicator Beam pitch 13 0.512 ( Receiver A B C D E 160 6.299 172 6.772 184 7.244 130 5.118 220 8.661 240 9.449 252 9.921 264 10.394 210 8.268 300 11.811 320 12.598 332 13.071 344 13.543 290 11.417 380 14.961 400 15.748 412 16.220 424 16.693 370 14.567 460 18.110 480 18.898 492 19.370 504 19.842 450 17.717 540 21.260 560 22.047 572 22.520 584 22.992 530 20.866 620 24.409 640 25.197 652 25.669 664 26.142 610 24.016 13 0.512 E Large multi-purpose indicator Beam pitch 88 (3.465 ) Large multi-purpose indicator 10 0.394 ø3.7 Gray Cable (with black line) Emitter 140 5.512 ) 88 (3.465 ) ø3.7 Gray Cable ø3.7 Gray Cable (with black line) 12 0.472 10.5 0.413 20 0.787 10 0.394 panasonic.net/id/pidsx/global Display section 21 0.827 (88 3.465) B A Large multi-purpose indicator 13.2 0.520 (7.7 0.303) t 2 t 0.079 30 1.181 (62.75 2.470) 20 0.787 20 0.787 2013.05 12 0.472 Display section 13 0.512 (10.5 0.413) (62.75 2.470) 13.2 0.520 (7.7 0.303) t 2 t 0.079 30 21 0.827 Receiver Panasonic Industrial Devices SUNX Co., Ltd. Global Sales Department No. CE-SF2C-5 May, 2013 2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan Telephone: +81-568-33-7861 Facsimile: +81-568-33-8591 All Rights Reserved ©Panasonic Industrial Devices SUNX Co., Ltd. 2013 ■ ■