0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
PF-EXL2-1

PF-EXL2-1

  • 厂商:

    NAIS(松下)

  • 封装:

    -

  • 描述:

    POLARIZING FILTER FOR EX-L291

  • 数据手册
  • 价格&库存
PF-EXL2-1 数据手册
173 FIBER SENSORS Ultra-compact Laser Sensor Amplifier Built-in EX-L200 SERIES Related Information ■■General terms and conditions.............. F-3   Glossary of terms / General precautions.P.1549~ / P.1552~ ■■Selection guide.............................. P.169~ ■■About laser beam........................ P.1593~ LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS Conforming to FDA regulations AREA SENSORS SAFETY LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS This product is classified as a Class 1 Laser Product in IEC / JIS standards and in FDA* regulations. Do not look at the laser beam through optical system such as a lens. PARTICULAR USE SENSORS SENSOR OPTIONS *This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration). SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES LASER MARKERS PLC HUMAN MACHINE INTERFACES ENERGY MANAGEMENT SOLUTIONS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS Selection Guide Amplifier Built-in Amplifierseparated EX-L200 HG-C panasonic.net/id/pidsx/global PNP output type available Interference prevention Introducing ultra-compact amplifier built-in laser sensor Ultra-compact Due to the customized IC and optical design, high precision detection is fulfilled with directivity and visibility achievable only by laser. The laser adopted is Class 1 (IEC / JIS / FDA) laser that is safe to use, so that there is no need to separate the areas of sensor usage. General-purpose photoelectric sensor THRU-BEAM TYPE Minute object detection type EX-L211 Spread the beam and lower its density, thus even a minute object can be detected with a small change in the light received intensity. Spot size: 6 × 4 mm 0.236 × 0.157 in approx. (Visual reference value at a distance from the emitter of 1 m 3.281 ft) Long sensing range type Depth 12 mm 0.472 in W8.2 × H23.4 × D12 mm W0.323 × H0.921 × D0.472 in (Thru-beam type) EX-L212 A long range detection of 3 m 9.843 ft is achieved. High precision detection with minimum beam spread is possible even in a long range. Spot size: 8 × 5.5 mm 0.315 × 0.217 in approx. (Visual reference value at a distance from the emitter of 1 m 3.281 ft) Sensing range Minute object detection type (EX-L211): 1 3.281 m ft Long sensing range type (EX-L212): 3 m 9.843 ft REFLECTIVE TYPE Long sensing range type EX-L291 Achieving ease of installation and 4 m 13.123 ft long sensing range. Spot size: 6 × 4 mm 0.236 × 0.157 in approx. (Visual reference value at a distance from the emitter of 1 m 3.281 ft) Sensing range 4 m 13.123 ft SPOT REFLECTIVE TYPE Minute object detection type EX-L221 Highly precise sensing with minimum 0.01 mm 0.0004 in diameter. Many applications are possible due to the 300 mm 11.811 in long sensing range. Spot size: ø1 mm ø0.039 in or less (Reference value at a distance from the emitter of 300 mm 11.811 in) Sensing range 45 to 300 mm 1.772 to 11.811 in Ultra-compact Laser Sensor EX-L200 SERIES APPLICATIONS Detecting ICs that are out of  position in multiple palettes 174 FIBER SENSORS Confirming arrival of substrate Determining cutting position of sheet LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS SAFETY LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS Sensing unevenly-colored workpieces Sensing glossy or curved-surface workpiece, such as metallic pipes Detecting O-ring PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES LASER MARKERS PLC CONVERGENT REFLECTIVE TYPE Spot type Sensing range EX-L261 Highly precise sensing with minimum 0.01 mm 0.0004 in diameter. Not affected by the background, and able to reliably sense unevenly-colored workpieces. Spot size: ø1 mm ø0.039 in or less (Visual reference value at a sensing distance of 50 mm 1.969 in) Line spot type EX-L262 Able to sense thin, glossy or curved-surface workpieces due to line beam. Spot size: 5 × 1 mm 0.197 × 0.039 in approx. (Visual reference value at a sensing distance of 50 mm 1.969 in) Spot type (EX-L261): 20 to 50 mm 0.787 to 1.969 in Sensing range HUMAN MACHINE INTERFACES ENERGY MANAGEMENT SOLUTIONS FA COMPONENTS Line spot type (EX-L262): MACHINE VISION SYSTEMS 0.787 to 2.756 in UV CURING SYSTEMS 20 to 70 mm Selection Guide Amplifier Built-in Amplifierseparated EX-L200 HG-C 175 FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS SAFETY LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS Ultra-compact Laser Sensor EX-L200 SERIES HIGH PRECISION Highly accurate detection EX-L211/L221 Suitable for positioning and minute object detection A repeatability of 0.02 mm 0.0008 in or less at a range of from 100 to 200 mm 3.937 to 7.874 in makes this type best suitable for positioning applications (typical, EX-L221). Moreover, it boasts a top-class detection precision in the compact laser sensor category with the gold wire of ø0.01 mm ø0.0004 in. Model No. (Minute object detection type) Minimum sensing object (Typical) Repeatability (Typical) EX-L211 (Thru-beam type) ø0.3 mm ø0.012 in 0.01 mm 0.0004 in or less EX-L221 (Spot reflective type) ø0.01 mm ø0.0004 in 0.02 mm 0.0008 in or less Detecting tip of very thin pipe * Typical values when the sensitivity adjuster is optimally adjusted. Dependable technology yields high precision Incorporating a high-precision aspheric glass lens Small receiver aperture for precision detection Light aberrations are reduced and a high definition laser spot is possible by incorporating a molded aspheric glass lens. Errant beams are eliminated by the ø0.5 mm ø0.020 in receiver aperture. Only beams entering the aperture are used, making for high-precision sensing. EX-L211/L212 STATIC CONTROL DEVICES LASER MARKERS The secret to high precision PLC HUMAN MACHINE INTERFACES ENERGY MANAGEMENT SOLUTIONS The secret to high precision Molded aspheric glass lenses ø0.5 mm ø0.020 in slit FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS Stable convergent distance sensing For sensing when background object presents Selection Guide Amplifier Built-in Amplifierseparated Due to convergent distance sensing, the background has very little effect, enabling stable sensing. Sensitivity adjuster allows you to adjust sensitivity to avoid sensing background objects when the distance between the workpiece and background objects is small. EX-L200 HG-C Sensitivity adjuster For sensing unevenly-colored workpieces Able to reliably sense unevenly-colored workpieces. EX-L261/L262 For sensing thin, glossy or curved-surface workpieces (Line spot type EX-L262) Able to sense glossy or curved-surface workpieces, such as PCB and metallic pipes, due to a wide line laser beam. Ultra-compact Laser Sensor EX-L200 SERIES EASY ALIGNMENT 176 FIBER SENSORS EX-L211/L212 Easy beam-axis alignment Visual positioning is easy due to silhouetting a sensing object against a receiver. PHOTOELECTRIC SENSORS Stability indicator (Green) Visually confirm the optimal receiver position, adjusting the beam axis by aligning the objects while watching the red spot on the beam alignment screen. The diagram on the right shows an example with the lead of a mechanical pencil being detected through visual adjustment. LASER SENSORS MICRO PHOTOELECTRIC SENSORS Sensing object (Lead of mechanical pencil) AREA SENSORS SAFETY LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS Bright red spot Beam alignment screen Shadow of sensing object (Lead of mechanical pencil) SENSOR OPTIONS EASY SETTING ENVIRONMENTAL RESISTANCE SIMPLE WIRE-SAVING UNITS Same mounting pitch as ultra-compact photoelectric sensor Strong against water and dust with protection structure IP67 WIRE-SAVING SYSTEMS EX-L200 series has the same mounting pitch as ultracompact photoelectric sensor EX-20 series so that the time taken in designing is saved. The sensor can be used even in environment where water or dust present because of its protection structure IP67. MEASUREMENT SENSORS STATIC CONTROL DEVICES LASER MARKERS Same mounting pitch as ultra-compact photoelectric sensor EX-20 series PLC HUMAN MACHINE INTERFACES ENERGY MANAGEMENT SOLUTIONS Mounting pitch* FA COMPONENTS MACHINE VISION SYSTEMS EX-L200 series * Thru-beam type: 13 mm 0.512 in Reflective type: 16 mm 0.630 in EX-20 series UV CURING SYSTEMS EASY TO USE M3 screw used for secure tightening Sensitivity adjuster (excluding EX-L212□) The mounting holes have metal sleeves inserted to prevent damage to the sensor due to over tightening of the screws. (Tightening torque: 0.5 N·m) A sensitivity adjuster of small size is incorporated to offer strong performance in minute detection or high precision detection. Conductor thickness 1.5 times increased to make wiring easier Low current consumption The lead wire conductor’s thickness is increased to 0.15 mm2 from 0.1 mm2 of the conventional ultra-compact photoelectric sensor. This makes it easier to perform crimpling work on the cables for better workability. In addition, the tensile strength of the crimpling area has become stronger. 0.1 mm2 Conventional ultra-compact photoelectric sensor 0.15 mm2 EX-L200 series Conductive thickness approx. 1.5 times greater EX-L200 HG-C The laser light source contributes to low current consumption, as it is approx. 5 mA lower than a LED light source. Switchable output operation The output operation switching input enables the switching of Light-ON or Dark-ON in one unit. This prevents ordering mistake and reduces the maintenance of spare parts. +V Output Output operation switching input Thru-beam type 0 V: Light-ON, +V or Open: Dark-ON 0V Reflective type 0 V: Dark-ON, +V or Open: Light-ON ( Selection Guide Amplifier Built-in Amplifierseparated ) 177 FIBER SENSORS Ultra-compact Laser Sensor ORDER GUIDE LASER SENSORS SAFETY LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS Minute object detection Thru-beam AREA SENSORS Appearance Long sensing range Minute object detection Sensing range 1 m 3.281 ft Long sensing range Retroreflective MICRO PHOTOELECTRIC SENSORS Type Spot reflective PHOTOELECTRIC SENSORS EX-L200 SERIES 3m 9.843 ft 4 m 13.123 ft (Note 2) 45 to 300 mm 1.772 to 11.811 in Model No. Emission spot size (Typical) Sensitivity adjuster NPN output PNP output EX-L211 EX-L211-P (at a sensing distance of 1 m 3.281 ft) EX-L212 EX-L212-P (at a sensing distance of 1 m 3.281 ft) EX-L291 EX-L291-P (at a sensing distance of 1 m 3.281 ft) EX-L221 EX-L221-P (at a sensing distance of 300 mm 11.811 EX-L261 EX-L261-P (at a sensing distance of 50 mm 1.969 in) Incorporated EX-L262 EX-L262-P (at a sensing distance of 50 mm 1.969 in) Incorporated Approx. 6 × 4 mm 0.236 × 0.157 in Incorporated Approx. 8 × 5.5 mm 0.315 × 0.217 in Approx. 6 × 4 mm 0.236 × 0.157 in ø1 mm ø0.039 in or less in) Incorporated Incorporated SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES LASER MARKERS PLC Convergent reflective SENSOR OPTIONS Sensing range A ENERGY MANAGEMENT SOLUTIONS MACHINE VISION SYSTEMS UV CURING SYSTEMS Selection Guide Amplifier Built-in Amplifierseparated Sensor Sensing object Setting range of the reflector B Reflector Approx. 5 × 1 mm 0.197 × 0.039 in RF-330 (Accessory) With PF-EXL2-1 polarizing filters (Note 3) RF-210 (Optional) With PF-EXL2-1 polarizing filters (Note 3) A 0 to 4 m 0 to 13.123 ft 0 to 4 m 0 to 13.123 ft 0 to 1.8 m 0 to 5.906 ft 0 to 1.2 m 0 to 3.937 ft B 0.2 to 4 m 0.656 to 13.123 ft 0.4 to 4 m 1.312 to 13.123 ft (Note 4) 0.16 to 1.8 m 0.525 to 5.906 ft 0.25 to 1.2 m 0.820 to 3.937 ft (Note 4) 3) Refer to “OPTIONS (p.179)” for the polarizing filter PF-EXL2-1 and the reflector RF-210. 4) When positioning the reflector nearby, the angular characteristic become more narrow. Adjust the angle of a sensor or reflector. 5) The sensing range is specified for white non-glossy paper (100 × 100 mm 3.937 × 3.937 in) as the object. M8 pigtailed type and 5 m 16.404 ft cable length type M8 pigtailed type and 5 m 16.404 ft cable length type (standard: 2 m 6.562 ft) are also available. When ordering these types, suffix “-J” for the M8 pigtailed type, “-C5” for the 5 m 16.404 ft cable length type to the model No. Please order the mating cable for the M8 pigtailed type separately. (e.g.) M8 pigtailed type of EX-L211-P is “EX-L211-P-J” 5 m 16.404 ft cable length type of EX-L211-P is “EX-L211-P-C5” · Mating cable (2 cables are required for the thru-beam type.) Type EX-L200 HG-C 20 to 70 mm 0.787 to 2.756 in (Note 5) (Convergent point: 22 mm 0.866 in) Line spot ø1 mm ø0.039 in or less Notes: 1) The model No. with “E” shown on the label affixed to the thru-beam type sensor is the emitter, “D” shown on the label is the receiver. 2) The sensing range is the value for RF-330 reflector. The sensing range represents the actual sensing range of the sensor. The sensing ranges itemized in “ A ” of the table below may vary depending on the shape of sensing object. Be sure to check the operation with the actual sensing object. HUMAN MACHINE INTERFACES FA COMPONENTS 20 to 50 mm 0.787 to 1.969 in (Note 5) (Convergent point: 22 mm 0.866 in) Spot Straight Elbow Model No. Cable length CN-24A-C2 CN-24A-C5 CN-24AL-C2 CN-24AL-C5 2 m 6.562 ft Mating cable · CN-24A-C2 · CN-24A-C5 · CN-24AL-C2 · CN-24AL-C5 5 m 16.404 ft 2 m 6.562 ft 5 m 16.404 ft Package without reflector Retroreflective type is also available without the reflector. Type Retroreflective type M8 pigtailed type 5 m 16.404 ft cable length type Model No. NPN output PNP output EX-L291-Y EX-L291-J-Y EX-L291-C5-Y EX-L291-P-Y EX-L291-P-J-Y EX-L291-P-C5-Y Accessories · MS-EXL2-2 (Mounting plate for thru-beam type): 1 pc. · MS-EXL2-3 (Mounting plate for retroreflective/spot reflective/convergent reflective type): 1 pc. · RF-330 (Reflector): 1 pc. * The illustration is straight type. ø9 mm ø4 mm ø0.354 in ø0.157 in EX-L200 SERIES Ultra-compact Laser Sensor 178 SPECIFICATIONS Model No. Type Item FIBER SENSORS Thru-beam Retroreflective Spot reflective Convergent reflective Minute object detection Long sensing range Long sensing range Minute object detection Spot Line spot NPN output EX-L211 EX-L212 EX-L291 EX-L221 EX-L261 EX-L262 PNP output EX-L211-P EX-L212-P EX-L291-P EX-L221-P EX-L261-P EX-L262-P CE marking directive compliance EMC Directive, RoHS Directive Sensing range 1 m 3.281 ft 4 m 13.123 ft (Note 2) 3 m 9.843 ft 45 to 300 mm 20 to 50 mm 0.787 to 1.969 in 20 to 70 mm 0.787 to 2.756 in 1.772 to 11.811 in (Note 3) (Convergent point: 22 mm 0.866 in) (Note 3) (Convergent point: 22 mm 0.866 in) (Note 3) Emission spot size (Typical) Approx. 6 × 4 mm 0.236 × 0.157 in Approx. 8 × 5.5 mm 0.315 × 0.217 in Approx. 6 × 4 mm 0.236 × 0.157 in Approx. 5 × 1 mm 0.197 × 0.039 in ø1 mm ø0.039 in or less ø1 mm ø0.039 in or less (vertical × horizontal) (vertical × horizontal) (vertical × horizontal) (vertical × horizontal) (at a sensing distance of 300 mm) (at a sensing distance of 50 mm) (at a sensing distance of 1 m) (at a sensing distance of 1 m) (Note 4) (at a sensing distance of 1 m) (Note 4) (at a sensing distance of 50 mm) Sensing object Opaque object of ø2 mm ø0.079 in or more Opaque object of ø3 mm ø0.118 in or more Opaque, translucent object of ø25 mm ø0.984 in or more Opaque, translucent or transparent object (Note 7) Minimum sensing object (Typical) (Note 5) Opaque object of ø0.3 mm ø0.012 in Gold wire of ø0.01 mm ø0.0004 in Hysteresis 20 % or less of operation distance Perpendicular to sensing axis: 0.05 mm 0.0020 in or less Repeatability Perpendicular to sensing axis: 0.2 mm 0.0080 in or less Repeatability (Typical) 0.01 mm 0.0004 in or less (perpendicular to sensing axis) (Note 5) (all area) 0.02 mm 0.0008 in or less (at 100 to 200 mm sensing distance) Supply voltage Emitter: 10 mA or less, Receiver: 10 mA or less Output NPN open-collector transistor • Maximum sink current: 50 mA • Applied voltage: 26.4 V DC or less (between output and 0 V) • Residual voltage: 2 V or less (at 50 mA sink current) 1 V or less (at 16 mA sink current) Output operation Incorporated (short-circuit protection / inverse polarity protection) Response time 0.5 ms or less Operation indicator Stability indicator Power indicator Green LED (lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type) Green LED (lights up when the power is ON) (incorporated on the emitter) Sensitivity adjuster 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure Vibration resistance 10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each Shock resistance Red semiconductor laser Class 1 [IEC / JIS / FDA (Note 6)] (Maximum output: EX-L211□ / EX-L212□ 390 µW, EX-L291□ 0.5 mW, EX-L221□ 2 mW, EX-L261□ 1 mW, EX-L262□ 1.3 mW, Peak emission wavelength: 655 nm 0.026 mil) Material WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES LASER MARKERS HUMAN MACHINE INTERFACES MACHINE VISION SYSTEMS Selection Guide Amplifier Built-in Amplifierseparated Enclosure: Polybutylene terephthalate, Front cover: Acylic, Lens: Glass, Indicator part: Polyarylate 0.15 mm2 4-core (emitter of a thru-beam type: 2-core) cabtyre cable, 2 m 6.562 ft long Cable Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable (thru-beam type: Total 100 m 328.084 ft both emitter and receiver). Cable extension Weight Net weight: Emitter 40 g approx., Receiver 40 g approx., Gross weight: 90 g approx. MS-EXL2-2 (Mounting plate): 2 pcs. Accessories Net weight: 45 g approx., Gross weight: 60 g approx. RF-330 (Reflector): 1 pc. MS-EXL2-3 (Metal plate): 1 pc. MS-EXL2-3 (Mounting plate): 1 pc. Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F. 2) The sensing range is the value for RF-330 reflector. The sensing range represents the actual sensing range of the sensor. The sensing ranges itemized in “ A ” of the table below may vary depending on the shape of sensing object. Be sure to check the operation with the actual sensing object. Sensing range A Sensor SENSOR OPTIONS 1,000 V AC for one min. between all supply terminals connected together and enclosure Insulation resistance Emitting element PARTICULAR USE SENSORS UV CURING SYSTEMS Incandescent light: 3,000 ℓx or less at the light-receiving face Voltage withstandability INDUCTIVE PROXIMITY SENSORS FA COMPONENTS 35 to 85 % RH, Storage: 35 to 85 % RH Ambient illuminance PRESSURE / FLOW SENSORS Continuously variable adjuster –10 to +55 °C +14 to +131 °F (No dew condensation or icing allowed), Storage: –30 to +70 °C –22 to +158 °F Ambient humidity SAFETY LIGHT CURTAINS / SAFETY COMPONENTS ENERGY MANAGEMENT SOLUTIONS IP67 (IEC) Ambient temperature AREA SENSORS Incorporated (Two sensors can be mounted close together.) Continuously variable adjuster (receiver) Protection MICRO PHOTOELECTRIC SENSORS PLC Orange LED (lights up when the output is ON) (incorporated on the receiver for thru-beam type) Automatic interference prevention function Environmental resistance 15 mA or less PNP open-collector transistor • Maximum source current: 50 mA • Applied voltage: 26.4 V DC or less (between output and +V) • Residual voltage: 2 V or less (at 50 mA source current) 1 V or less (at 16 mA source current) Light-ON / Dark-ON selectable by the output operation switching input Short-circuit protection PHOTOELECTRIC SENSORS SIMPLE WIRE-SAVING UNITS 12 to 24 V DC ±10 % Ripple P-P 10 % or less Current consumption LASER SENSORS Sensing object Setting range of the reflector B Reflector RF-330 (Accesory) With PF-EXL2-1 polarizing filters *1 RF-210 (Optional) A 0 to 4 m 0 to 13.123 ft 0 to 4 m 0 to 13.123 ft 0 to 1.8 m 0 to 5.906 ft 0 to 1.2 m 0 to 3.937 ft B 0.2 to 4 m 0.656 to 13.123 ft 0.4 to 4 m 1.312 to 13.123 ft *2 0.16 to 1.8 m 0.525 to 5.906 ft 0.25 to 1.2 m 0.820 to 3.937 ft *2 With PF-EXL2-1 polarizing filters *1 *1 Refer to “OPTIONS” (P.179) for the polarizing filter PF-EXL2-1 and the reflector RF-210. *2 When positioning the reflector nearby, the angular characteristic become more narrow. Adjust the angle of a sensor or reflector. 3) The sensing range is specified for white non-glossy papar (100 × 100 mm 3.937 × 3.937 in) as the object. 4) EX-L212□: In the case sensing distance is 3 m 9.843 ft, the emission spot size is H 17 × W 11 mm H 0.669 × W 0.433 in (visual reference value). EX-L291□: In the case sensing distance is 4 m 13.123 ft, the emission spot size is H 18 × W 10 mm H 0.709 × W 0.394 in (visual reference value). 5) Typical values when the sensitivity adjuster is optimally adjusted. 6) This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration). 7) Make sure to confirm detection with an actual sensor before use. EX-L200 HG-C 179 FIBER SENSORS Ultra-compact Laser Sensor EX-L200 SERIES OPTIONS LASER SENSORS PHOTOELECTRIC SENSORS Designation WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES LASER MARKERS brackets.) Universal sensor mounting bracket Polarizing filter MS-EXL2-6 Compatible bracket for thru-beam type A bracket to easily mount EX-L21□ on the 25.4 mm 1.000 in pitch sensor mounting bracket: Use with the mounting plate attached to the sensor. Two brackets are needed when used for the emitter and the receiver. MS-EXL2-4 It can adjust the height and the angle of the sensor. (The thru-beam type sensor needs two brackets.) PF-EXL2-1 For retroreflective type EX-L291□ Stabilizes sensitivity of the reflective surface. Reflector RF-210 For retroreflective type EX-L291□ Sensing range: 1.8 m 5.906 in (Note) Reflector mounting bracket MS-RF21-1 Protective mounting bracket for RF-210 It protects the reflector from damage and maintains alignment. Two M3 (length 12 mm 0.472 in) screws with washers [stainless steel (SUS)] are attached. Polarizing filter Amplifierseparated EX-L200 Beam-receiving part · MS-EXL2-4 Adjustment ±3° Beam-emitting part Beam-receiving side 360° rotation Beam-emitting side Height adjustment: 15 mm 0.591 in Material: Stainless steel (SUS304) Two M3 (length 14 mm 0.551 in) screws with washers, one M3 (length 10 mm 0.394 in) hexagon-socket head bolt [stainless steel (SUS)], and one M3 hexagon nut [stainless steel (SUS)] are attached. Material: Die-cast zinc alloy I/O CIRCUIT DIAGRAMS NPN output type PNP output type I/O circuit diagram I/O circuit diagram Color code of wire/Terminal No. of pigtailed type (Pink/2) Output operation switching Load input (Note 1, 2, 3) (Black/4) Output (Note 1) (Blue/3) 0 V Internal circuit Color code of wire/Terminal No. of pigtailed type (Brown/1) +V (Brown/1) +V Sensor circuit Selection Guide Amplifier Built-in · PF-EXL2-1 Universal sensor mounting bracket Note: S  et the distance between the reflector and sensor to be at least 0.16 m 0.525 ft. Refer to “ORDER GUIDE (p.177)” for details. UV CURING SYSTEMS · MS-RF21-1 Two M3 (length 12 mm 0.472 in) screws with washers are attached. + – 12 to 24 V DC ±10 % 50 mA max. 50 mA max. Sensor circuit MACHINE VISION SYSTEMS Reflector mounting bracket Material: Stainless steel (SUS304) HUMAN MACHINE INTERFACES FA COMPONENTS 11 mm 0.433 in Two M3 (length 14 mm 0.551 in) screws with washers [stainless steel (SUS)] are attached. PLC ENERGY MANAGEMENT SOLUTIONS · RF-210 12.8 mm 0.504 in Material: Stainless steel (SUS304) · MS-EXL2-6 Reflector 33.3 mm 1.311 in Two M3 (length 14 mm 0.551 in) screws with washers [stainless steel (SUS)] are attached. Back angled mounting bracket INDUCTIVE PROXIMITY SENSORS SIMPLE WIRE-SAVING UNITS Material: Stainless steel (SUS304) MS-EXL2-5 (The thru-beam type sensor needs two Sensor mounting bracket ・MS-EXL2-5 · MS-EXL2-1 brackets.) PRESSURE / FLOW SENSORS SENSOR OPTIONS Sensor mounting bracket MS-EXL2-1 (The thru-beam type sensor needs two AREA SENSORS PARTICULAR USE SENSORS Description Foot angled mounting bracket MICRO PHOTOELECTRIC SENSORS SAFETY LIGHT CURTAINS / SAFETY COMPONENTS Model No. (Black/4) Output (Note 1) (Pink/2) Output Load operation switching input (Note 1, 2, 3) Internal circuit User’s circuit Notes: 1) The emitter of a thru-beam type does not incorporate output (black/4) and output operation switching input (pink/2). 2) B  e able to select either Light-ON or Dark-ON by wiring the output operation switching input (pink/2) as shown in the following table. + – 12 to 24 V DC ±10 % (Blue/3) 0 V User’s circuit Notes: 1) The emitter of a thru-beam type does not incorporate output (black/4) and output operation switching input (pink/2). 2) B  e able to select either Light-ON or Dark-ON by wiring the output operation switching input (pink/2) as shown in the following table. Type Light-ON Dark-ON Type Light-ON Dark-ON Thru-beam, Retroreflective Connect to 0 V Connect to +V or, Open Thru-beam, Retroreflective Connect to 0 V Connect to +V or, Open HG-C Spot reflective/ Connect to +V or, Open Convergent reflective Connect to 0 V * Insulate the output operation switching input wire (pink/2) when leaving it open. 3) When connecting the mating cable to the pigtailed type, color code of wire is “white”. Spot reflective/ Connect to +V or, Open Convergent reflective * Insulate the output operation switching input wire (pink/2) when leaving it open. 3) W  hen connecting the mating cable to the pigtailed type, color code of wire is “white”. Connector pin position (pigtailed type) Connector pin position (pigtailed type) 2 Sensing mode selection input (Note) 2 Sensing mode selection input (Note) 1 +V 4 Output (Note) 3 0V Note: The emitter of a thru-beam type does not incorporate output and output operation switching input. Connect to 0 V 1 +V 4 Output (Note) 3 0V Note: The emitter of a thru-beam type does not incorporate output and output operation switching input. EX-L200 SERIES Ultra-compact Laser Sensor 180 SENSING CHARACTERISTICS (TYPICAL) Horizontal direction 1,000 39.370 Vertical direction 500 Emitter 19.685 Horizontal direction Emitter L ℓ L Setting distance L (mm in) Setting distance L (mm in) Parallel deviation Angular deviation Vertical direction Emitter 1,000 angular 39.370 deviation Emitter L 500 19.685 Receiver angular deviation Emitter angular deviation 0 40 4 13.123 Receiver angular deviation Emitter θ θ Receiver Receiver Receiver 0 5 0 5 10 10 0.394 0.197 0.197 0.394 (Down) Left Center Right (Up) Operating point ℓ (mm in) Thru-beam type L Receiver Horizontal direction 3 9.843 2 6.562 Vertical direction Emitter 1 3.281 ℓ Horizontal direction Emitter L ℓ Receiver 0 20 0 20 40 Left Center Right Operating point θ ( ° ) 4 13.123 Vertical direction L Emitter angular 3 deviation 9.843 Emitter 2 6.562 Receiver 0 40 20 10 0 10 20 0.787 0.394 0.394 0.787 (Down) Left Right (Up) Center Operating point ℓ (mm in) 4 13.123 Reflector (RF-330) ℓ 2 6.562 L Sensor 4 13.123 Setting distance L (m ft) Setting distance L (m ft) Setting distance L (m ft) 4 13.123 Reflector (RF-330) ℓ 2 6.562 0 20 0.787 10 0 10 20 0.394 0.394 0.787 Left Center Right Operating point ℓ (mm in) L Sensor 0 10 10 0.394 0.394 Down Center Up Operating point ℓ (mm in) 20 0.787 2 6.562 Sensor angular deviation Sensor angular deviation Reflector angular deviation Reflector (RF-330) Reflector (RF-330) θ L Sensor 0 80 L θ Sensor 40 0 40 80 Left Center Right Operating point θ ( ° ) EX-L221□ Left ON Sensing range L (mm in) Setting distance L (mm in) 400 15.748 Right ON 100 × 100 mm 3.937 × 3.937 in Non-glossy paper ℓ L Sensor 0 2 0.079 1 0 1 2 0.039 0.039 0.079 Left Center Right Operating point ℓ (mm in) Sensing range L (mm in) 400 15.748 White 200 7.874 0 200 7.874 Sensing region 100 3.937 N2 N4 N6 Lightness N8 WIRE-SAVING SYSTEMS Reflector angular deviation 4 13.123 2 6.562 Sensor angular deviation STATIC CONTROL DEVICES Sensor angular deviation Reflector angular deviation Reflector (RF-330) Reflector (RF-330) θ Sensor 0 80 MEASUREMENT SENSORS L θ LASER MARKERS L PLC Sensor 40 0 40 Center Down Up Operating point θ ( ° ) 80 N1 N2 N3 N4 N5 N6 N7 N8 N9 HUMAN MACHINE INTERFACES ENERGY MANAGEMENT SOLUTIONS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS Amplifier Built-in 2 4 6 0.079 0.157 0.236 White non-glossy paper side length a (mm in) The graph is drawn for the maximum sensitirity setting. Light SENSOR OPTIONS Selection Guide 100 3.937 The sensing region (typical) is represented by oblique lines in the left figure. However, the sensitivity should be set with an enough margin because of slight variation in products. 300 11.811 0 PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS As the sensing object size becomes smaller than the standard size (white non-glossy paper 100 × 100 mm 3.937 × 3.937 in), the sensing range shortens, as shown in the left graph. For plotting the left graph, the sensitivity has been set such that a 100 × 100 mm 3.937 × 3.937 in white non-glossy paper is just detectable at a distance of 300 mm 11.811 in. 300 11.811 Correlation between lightness and sensing range Dark Receiver 20 0 20 40 PARTICULAR Left Center Right USE Operating point θ ( ° ) SENSORS Correlation between sensing object size and sensing range 400 15.748 100 3.937 SAFETY LIGHT CURTAINS / SAFETY COMPONENTS Spot reflective type Sensing field AREA SENSORS L θ θ • Vertical direction Setting distance L (m ft) • Vertical direction MICRO PHOTOELECTRIC SENSORS SIMPLE WIRE-SAVING UNITS Angular deviation • Horizontal direction Reflector angular deviation 200 7.874 Emitter angular deviation Receiver angular deviation Emitter Retroreflective type Parallel deviations • Horizontal direction 300 11.811 Receiver angular deviation 1 Receiver 3.281 EX-L291□ 0 20 0.787 L LASER SENSORS PHOTOELECTRIC SENSORS Angular deviation Setting distance L (m ft) Parallel deviation ℓ EX-L212□ Thru-beam type Setting distance L (m ft) EX-L211□ FIBER SENSORS Lightness shown on the left may differ slightly from the actual object condition. 8 0.315 Amplifierseparated EX-L200 HG-C 181 Ultra-compact Laser Sensor SENSING CHARACTERISTICS (TYPICAL) FIBER SENSORS N2 PLC EX-L262□ Sensing fields • Horizontal (left and right) direction Selection Guide 80 3.150 Amplifierseparated 100 × 100 mm 3.937 × 3.937 in White non-glossy paper 4.1 mm 0.161 in ℓ 2 0.079 L 1 0 1 2 0.039 0.039 0.079 Left Center Right Operating point ℓ (mm in) 100 × 100 mm 3.937 × 3.937 in White non-glossy paper 13.3 mm 0.524 in ℓ L Max. sensitivity sensing region 50 1.969 5 0 5 0.197 0.197 Down Center Up Operating point ℓ (mm in) 10 0.394 0 Dark N2 N4 N6 Lightness N8 Light N1 N2 N3 N4 N5 N6 N7 N8 N9 5 mm 0.197 in Approx. 3.4 mm 0.134 in Emitting part 0 15 0.591 2 mm 0.079 in Correlation between material and sensing range (face-to-face) 300 11.811 Normal sensitivity 200 7.874 Max. sensitivity 100 3.937 70 2.756 50 1.969 Normal sensitivity sensing region 22 0.866 Approx. 4.7 mm 0.185 in Sensor 0 The sensing region (typical) is represented by oblique lines in the left figure. However, the sensitivity should be set with enough margin because of slight variation in products. Distance to convergent point Sensing range L (mm in) 100 3.937 6.2 mm 0.244 in 20 0.787 Correlation between lightness and sensing range EX-L200 HG-C Normal sensitivity 40 1.575 Sensor 0 Amplifier Built-in 80 3.150 70 2.756 60 2.362 50 1.969 40 1.575 Max. sensitivity 80 3.150 40 1.575 Emitted beam • Vertical (up and down) direction Max. sensitivity Normal sensitivity The bars in the graph indicate the sensing range (typical) for the respective material. However, there is a slight variation in the sensing range depending on the product. Further, if there is a reflective object (conveyor, etc.) in the background of the sensing object, since it affects the sensing, separate it by more than twice the sensing range shown in the left graph, or adjust the sensitivity adjuster. Make sure to confirm detection with an actual sensor. Convergent reflective type 22 0.866 Lightness shown on the left may differ slightly from the actual object condition. 0 Distance to convergent point UV CURING SYSTEMS 0 Lightness shown on the left may differ slightly from the actual object condition. Mirror MACHINE VISION SYSTEMS Light White non-glossy paper Aluminum plate Stainless steel plate (SUS304) FA COMPONENTS N8 N1 N2 N3 N4 N5 N6 N7 N8 N9 Setting distance L (mm in) ENERGY MANAGEMENT SOLUTIONS N4 N6 Lightness Mirror 0 Dark 22 0.866 Substrate 22 0.866 50 1.969 Distance to convergent point Normal sensitivity sensing region White non-glossy paper Aluminum plate Stainless steel plate (SUS304) 50 1.969 300 11.811 Normal sensitivity 200 7.874 Max. sensitivity 100 3.937 Cardboard Max. sensitivity sensing region 2 mm 0.079 in Correlation between material and sensing range (face-to-face) The sensing region (typical) is represented by oblique lines in the left figure. However, the sensitivity should be set with enough margin because of slight variation in products. 100 3.937 Emitting part 0 6 0.236 Correlation between lightness and sensing range LASER MARKERS HUMAN MACHINE INTERFACES 4 0.157 Substrate STATIC CONTROL DEVICES 0 2 0 2 0.079 0.079 Down Center Up Operating point ℓ (mm in) 1 0 1 2 0.039 0.039 0.079 Left Center Right Operating point ℓ (mm in) 20 0.787 Cardboard MEASUREMENT SENSORS Normal sensitivity Black rubber WIRE-SAVING SYSTEMS Max. sensitivity Black rubber 0 2 0.079 Sensing range L (mm in) SIMPLE WIRE-SAVING UNITS Sensor Approx. 4 mm 0.157 in Distance L (mm in) 40 1.575 PARTICULAR USE SENSORS SENSOR OPTIONS Normal sensitivity 60 2.362 50 1.969 40 1.575 Sensing range L (mm in) INDUCTIVE PROXIMITY SENSORS 100 × 100 mm 3.937 × 3.937 in White non-glossy paper 4.1 mm 0.161 in ℓ L 80 3.150 Distance L (mm in) PRESSURE / FLOW SENSORS 100 × 100 mm 3.937 × 3.937 in 80 White non-glossy paper 3.150 ℓ L 13.3 mm 0.524 in Sensor 40 1.575 Max. sensitivity 80 3.150 Emitted beam • Vertical (up and down) direction Sensing range L (mm in) SAFETY LIGHT CURTAINS / SAFETY COMPONENTS Sensing fields • Horizontal (left and right) direction Setting distance L (mm in) AREA SENSORS Convergent reflective type Distance to convergent point MICRO PHOTOELECTRIC SENSORS EX-L261□ Setting distance L (mm in) PHOTOELECTRIC SENSORS Setting distance L (mm in) LASER SENSORS EX-L200 SERIES The bars in the graph indicate the sensing range (typical) for the respective material. However, there is a slight variation in the sensing range depending on the product. Further, if there is a reflective object (conveyor, etc.) in the background of the sensing object, since it affects the sensing, separate it by more than twice the sensing range shown in the left graph, or adjust the sensitivity adjuster. Make sure to confirm detection with an actual sensor. Ultra-compact Laser Sensor PRECAUTIONS FOR PROPER USE EX-L200 SERIES 182 Refer to p.1552~ for general precautions and p.1593~ for information about laser beam. • This catalog is a guide to select a suitable product. Be sure to read the instruction manual attached to the product prior to its use. • Never use this product as a sensing device for personnel protection. • In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. Automatic interference prevention function • Spot reflective type sensor incorporate this function. Up to two sets of sensor can be mounted closely. (Thru-beam type sensor does not have this function.) 2 sensor heads can be mounted adjacently. Note: If two spot reflective type sensor are mounted facing each other, they should be angled so as not to receive the beam from the opposing sensor or to detect its front face. Incorrect Correct • This product is classified as a Class 1 Laser Product in IEC / JIS standards and in FDA* regulations. Do not look at the laser beam through optical system such as a lens. • The following label is attached to the cable. Handle the product according to the instruction given on the warning label. *This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration). Safety standards for laser beam products • A laser beam can harm human being’s eyes, skin, etc., because of its high energy density. IEC has classified laser products according to the degree of hazard and the stipulated safety requirements. EX-L200 series is classified as Class 1 laser. Classification by IEC 60825-1 Classification Class 1 Description Lasers that are safe under reasonably foreseeable conditions of operation, including the use of optical instruments for intrabeam viewing. Safe use of laser products • For the purpose of preventing users from suffering injuries by laser products, IEC 60825-1 (Safety of laser products). Kindly check the standards before use. (Refer to p.1593~ for information about laser beam.) • When mounting this sensor, use a mounting plate (MS-EXL2-2, MS-EXL2-3). Without using the mounting plate, beam misalignment may occur. Also, install the mounting plate in between the sensor and the mounting surface. • The tightening torque should be 0.5 N·m or less. Note: The mounting direction of the mounting plate is fixed. Install in a way so that the bending shape is facing the sensor side. EX-L21□ t 0.8 mm t 0.031 in 8.2 mm 0.323 in MICRO PHOTOELECTRIC SENSORS SAFETY LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS • Do not use during the initial transient time (approx. 50ms) after the power supply is switched ON. • In case the load and this sensor are connected to different power supplies, be sure to turn ON the power from the sensor. • The cable may break by applying excess stress in low temperature. • Do not allow any water, oil fingerprints, etc., which may refract light, or dust, dirt, etc., which may block light, to stick to the emitting/receiving surfaces of the sensor head. In case they are present, wipe them with a clean, soft cloth or lens paper. Do not use this sensor in places having excessive vapor, dust, etc., or where it may come in contact with corrosive gas. • Take care that the sensor does not come in direct contact with oil, grease, organic solvents, such as, thinner etc., or strong acid, and alkaline. • Make sure that the power is OFF while cleaning the emitting/receiving windows of the sensor head. • This device is using a laser which has high directional quality. Therefore the beam possibly be out of alignment by the mounting condition of this device or distortion of housing etc. Make sure to adjust the beam axe alignment before use. MEASUREMENT SENSORS STATIC CONTROL DEVICES LASER MARKERS PLC HUMAN MACHINE INTERFACES ENERGY MANAGEMENT SOLUTIONS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS Selection Guide Amplifier Built-in Amplifierseparated EX-L200 Mounting 13 mm 0.512 in PHOTOELECTRIC SENSORS SENSOR OPTIONS Others Warning label LASER SENSORS AREA SENSORS Cautions for laser beams Proof label FIBER SENSORS EX-L291□/L221□/L261□/262□ Mounting plate MS-EXL2-2 (Accessory) Mounting plate MS-EXL2-3 (Accessory) 16 mm 0.630 in t 0.8 mm t 0.031 in M3 screw 8.2 mm Screws are not attached. 0.323 in Purchase separately. ( ) HG-C 183 FIBER SENSORS LASER SENSORS Ultra-compact Laser Sensor DIMENSIONS (Unit: mm in) AREA SENSORS 8.2 0.323 Operation indicator (Orange) (Note 1) 6.4 0.252 9.3 0.366 PRESSURE / FLOW SENSORS PLC HUMAN MACHINE INTERFACES ENERGY MANAGEMENT SOLUTIONS FA COMPONENTS Sensitivity adjuster 2.8 0.110 (Note 2) 8.2 0.323 6.4 0.252 18.6 23.4 0.732 0.921 13 0.512 9.3 0.366 9.3 0.366 Beamreceiving part Beamemitting part 2-ø3.2 ø0.126 mounting holes 4.1 0.161 M8 connector ( ) 32 (1.260 ) Notes: 1  ) It is the laser radiation indicator (green) on the emitter. 2) It is incorporated in EX-L211(-P)-J only. EX-L291(-P)-J EX-L221(-P) Sensor Stability indicator (Green) 13 0.512 Operation indicator (Orange) 2.5 0.098 13.3 0.524 21.6 27.4 0.850 1.079 Sensitivity adjuster 16 0.630 6.4 0.252 8.2 0.323 6.4 0.252 2.8 0.110 2.8 0.110 8.3 0.327 Beamreceiving part 2.8 0.110 2.5 0.098 2.8 0.110 6.9 0.272 13.3 0.524 21.6 27.4 0.850 1.079 16 0.630 8.3 0.327 2-ø3.2 ø0.126 mounting holes 4.3 0.169 6.4 0.252 ø3.7 ø0.146 cable, 2 m 6.562 ft long 4-core × 0.15 mm2 insulator dimeter: ø1.0 mm ø0.004 in 4.3 0.169 Sensitivity adjuster 13 0.512 Operation indicator (Orange) Beamemitting part 2-ø3.2 ø0.126 mounting holes UV CURING SYSTEMS ø3.7 ø0.146 cable ( ) 200 7.874 Assembly dimensions with polarizing filter (PF-EXL2-1) 2 Mounting drawing with EX-L291(-P) M8 connector 32 (1.260 ) 4 1 3 View A Selection Guide Stability indicator (Green) Amplifier Built-in 8.6 0.339 6.4 0.252 Operation indicator (Orange) EX-L200 HG-C 9.3 0.366 13 0.512 200 7.874 Sensor MACHINE VISION SYSTEMS Amplifierseparated 2.8 0.110 ø3.7 ø0.146 cable 4.1 0.161 Stability indicator (Green) 6.9 0.272 18.6 23.4 0.732 0.921 6.2 0.244 EX-L291(-P) EX-L221(-P) 6.4 0.252 Sensitivity adjuster 2.8 0.110 (Note 2) Beam axis Notes: 1) It is the laser radiation indicator (green) on the emitter. 2) It is incorporated in EX-L211(-P) only. 8.2 0.323 12 Operation indicator 0.472 (Orange) (Note 1) 2.5 0.098 2.8 0.110 2-ø3.2 ø0.126 mounting holes STATIC CONTROL DEVICES LASER MARKERS 2.5 0.098 12 0.472 ø3.7 ø0.146 cable, 2 m 6.562 ft long 4-core (emitter: 2-core) × 0.15 mm2 insulator dimeter: ø1.0 mm ø0.004 in SENSOR OPTIONS Sensor Stability indicator (Green) 6.2 0.244 PARTICULAR USE SENSORS MEASUREMENT SENSORS EX-L211(-P)-J EX-L212(-P)-J Beam axis INDUCTIVE PROXIMITY SENSORS WIRE-SAVING SYSTEMS Sensor Stability indicator (Green) SAFETY LIGHT CURTAINS / SAFETY COMPONENTS SIMPLE WIRE-SAVING UNITS The CAD data can be downloaded from our website. EX-L211(-P) EX-L212(-P) PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS EX-L200 SERIES 2.5 0.098 7.2 13.6 0.283 0.535 6.4 0.252 Beamreceiving part 21.6 27.4 0.850 1.079 Beamemitting part 13.4 0.528 Sensitivity adjuster 2.8 0.110 8.3 0.327 2-ø3.2 ø0.126 mounting holes 4.3 0.169 ø3.7 ø0.146 cable, 2 m 6.562 ft long 4-core × 0.15 mm2 insulator dimeter: ø1.0 mm ø0.004 in Sensor Stability indicator (Green) 8.2 0.323 6.4 0.252 2.8 0.110 16 0.630 EX-L261(-P) EX-L262(-P) Beamreceiving part Beamemitting part Operation indicator (Orange) 2.5 0.098 6.9 0.272 13.3 0.524 21.6 27.4 0.850 1.079 13.5 0.531 13 0.512 Sensitivity adjuster 2.8 0.110 2.8 0.110 16 0.630 8.3 0.327 2-ø3.2 ø0.126 mounting holes 6.4 0.252 4.8 0.189 ø3.7 ø0.146 cable, 2 m 6.562 ft long Ultra-compact Laser Sensor DIMENSIONS (Unit: mm in) RF-330 EX-L200 SERIES 184 The CAD data can be downloaded from our website. RF-210 Reflector (Accessory for EX-L291□) Reflector (Optional) 33.3 1.311 2-ø3.2 ø0.126 mounting holes 30 1.181 24 0.945 32 1.260 2-ø3.4 ø0.134 thru-holes (for mounting at the side) 25 0.984 10 0.394 2-ø3.4 ø0.134 holes, 6 0.236 deep (for mounting at the back) Material: Acrylic (Reflector) ABS (Base) Two M3 (length 8 mm 0.315 in) screws with washers and two nuts are attached. MS-RF21-1 2-M3 nut mounting holes (for mounting at the side) Reflector mounting bracket for RF-210 (Optional) 23 0.906 5.5 0.217 Assembly dimensions Material: Stainless steel (SUS304) Two M3 (length 12 mm 0.472 in) screws with washers are attached. 10 0.394 3.5 0.138 46 1.811 25 0.984 MS-EXL2-1 MACHINE VISION SYSTEMS 16 0.630 14° 3-M3 × 0.5 0.020 2.5 0.098 13 0.512 16 0.630 3 0.118 3.05 0.120 t 1.5 t 0.059 UV CURING SYSTEMS Assembly dimensions 2 Mounting drawing with the receiver of EX-L211□/L212□ 1.2 0.047 11.6 0.457 3 0.118 2.5 0.098 2.5 0.098 10° 13 0.512 t 1.2 t 0.047 FA COMPONENTS Sensor mounting bracket (Optional) Foot angled mounting bracket 43 1.693 ENERGY MANAGEMENT SOLUTIONS 13 0.512 12.5 7.5 0.492 0.295 SIMPLE WIRE-SAVING UNITS HUMAN MACHINE INTERFACES 46 1.811 25 0.984 13 0.512 3.2 0.126 SENSOR OPTIONS LASER MARKERS 20° 10 0.394 R7.5 R0.295 ø25 t 1.2 ø0.984 t 0.047 12.5 0.492 3.5 0.138 PARTICULAR USE SENSORS PLC 3.2 0.126 8 0.315 2 0.079 INDUCTIVE PROXIMITY SENSORS STATIC CONTROL DEVICES 30° 20° 16 0.630 PRESSURE / FLOW SENSORS MEASUREMENT SENSORS ø36 50 ø1.417 1.969 30° SAFETY LIGHT CURTAINS / SAFETY COMPONENTS WIRE-SAVING SYSTEMS 23 0.906 5.5 0.217 ø36 50 ø1.417 1.969 3.2 0.126 R13 R0.512 AREA SENSORS Base 3.2 0.126 Material: Acrylic (Reflector) ABS (Base) 1 MICRO PHOTOELECTRIC SENSORS M3 nut mounting holes (for mounting at the back) Reflector 11 0.433 23 45 37 1.772 1.457 0.906 LASER SENSORS PHOTOELECTRIC SENSORS 12.8 0.504 5.5 0.217 4.2 0.165 FIBER SENSORS 3.2 0.126 3.5 0.138 Beamreceiving part Mounting drawing with EX-L291□/L221□/L261□/L262□ 12 0.472 ( 3.2 24.1 0.126 0.949 7.5 0.295 12.5 0.492 2 0.079 8 0.315 16 0.630 R13 R0.512 14° ) B Amplifier Built-in A 13 0.512 11.6 0.457 3 0.118 Material: Stainless steel (SUS304) Two M3 (length 14 mm 0.551 in) screws with washers [stainless steel (SUS)] are attached. 33 1.299 43 1.693 26.5 t 1.2 1.043 t 0.047 24.1 ( 0.949 ) 3.2 0.126 7.5 0.295 12.5 0.492 2 0.079 8 0.315 3.2 0.126 3.5 0.138 16 0.630 35.4 29 1.394 1.142 43 1.693 23.5 0.925 t 1.2 t 0.047 Model No. A B EX-L291□ / L221□ 13 0.512 13.5 0.532 2.2 0.087 2.7 0.106 EX-L261□ / L262□ Amplifierseparated EX-L200 HG-C 16 0.630 R13 R0.512 Beam-receiving part 14° Beam-emitting part 13 0.512 3.05 3.1 0.120 0.122 26.5 1.043 Selection Guide 185 Ultra-compact Laser Sensor DIMENSIONS (Unit: mm in) FIBER SENSORS LASER SENSORS MS-EXL2-2 PHOTOELECTRIC SENSORS 1.5 0.059 SAFETY LIGHT CURTAINS / SAFETY COMPONENTS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES LASER MARKERS PLC 2.6 0.102 Beamemitting part 3.05 0.120 UV CURING SYSTEMS Selection Guide 1 0.039 Beam-receiving part 1 0.039 3.5 0.138 3.05 0.120 t 0.8 t 0.031 *W  ithout using the mounting plate, beam misalignment may occur. Note: S  crews are not attached. Purchase separately. MS-EXL2-4 Universal sensor mounting bracket (Optional) 1.5 0.059 1 4 0.157 11.2 0.441 1.5 0.059 9.5 0.374 8.4 0.331 3° 14 0.551 ø8.5 ø0.335 15.5 0.610 2-hexagon nut seats 3 0.118 15 0.591 2-ø3.2 ø0.126 mounting holes 6 0.236 3.05 0.120 3.45 0.136 3-M3 × 0.5 0.020 3.8 0.150 12 0.472 5.5 0.217 13 0.512 5.5 0.217 30 1.181 ø8.5 ø0.335 3 2 13 0.512 25.5 1.004 3.05 31.5 0.120 1.240 ENERGY MANAGEMENT SOLUTIONS MACHINE VISION SYSTEMS 2.6 0.102 Material: Stainless steel (SUS304) HUMAN MACHINE INTERFACES FA COMPONENTS 4.9 0.193 Beam-emitting part * Without using the mounting plate, beam misalignment may occur. Note: Screws are not attached. Purchase separately. 28.5 25.5 1.122 1.004 9 0.354 16 21.8 0.630 0.858 Material: Stainless steel (SUS304) 4.1 0.161 Assembly dimensions 2.8 0.110 1 0.039 2-ø3.05 ø0.120 2.8 0.110 2.6 0.102 1.5 0.059 4.9 0.193 3.5 0.138 t 0.8 t 0.031 INDUCTIVE PROXIMITY SENSORS SENSOR OPTIONS 9 0.354 Mounting plate (Accessory for EX-L291□/L221□/L26□) 10.6 0.417 Mounting drawing with the emitter 13 18.8 0.512 0.740 PRESSURE / FLOW SENSORS MS-EXL2-3 Assembly dimensions 2.8 0.110 2-ø3.05 ø0.120 2.8 2.6 0.110 0.102 1 0.039 AREA SENSORS The CAD data can be downloaded from our website. Mounting plate (Accessory for EX-L211□/L212□) 10.6 0.417 MICRO PHOTOELECTRIC SENSORS PARTICULAR USE SENSORS EX-L200 SERIES 14 0.551 1.5 0.059 19.5 0.768 t 1.5 t 0.059 ø3.3 ø0.130 thru-holes 4 0.157 Material: Die-cast zinc alloy 2.5 0.098 10° 2.5 0.098 16 0.630 2.5 0.098 Material: Stainless steel (SUS) Material: Die-cast zinc alloy Two M3 (length 14 mm 0.551 in) screws with washers [stainless steel (SUS)], one M3 (length 10 mm 0.394 in) hexagon socket-head bolt [stainless steel (SUS)], and one M3 hexagon nut [stainless steel (SUS)] are attached. Assembly dimensions Assembly dimensions Mounting drawing with the receiver of EX-L211□/L212□ Mounting drawing with EX-L291□/L221□ Amplifier Built-in Amplifierseparated EX-L200 2.3 (8.8) 0.091 (0.346) (6.7) (0.264) 3.8 0.150 5.1 0.201 3 0.118 HG-C Beam-receiving part 13 0.512 6.5 0.256 (15) (0.591) (Note) 31.5 1.240 ø8.5 ø0.335 30 1.181 12 15 0.591 0.472 2-ø3.2 ø0.126 mounting holes 14 0.551 6 0.236 9.5 0.374 19.5 0.768 Note: This is the adjustable range of the movable part. (6.7) (0.264) Beam-receiving part (8.8) (0.346) 2.3 0.091 2.8 0.110 5.9 0.232 3 0.118 (15) 16 (0.591) (Note) 0.630 31.5 1.240 10.5 0.413 Beam-emitting part 4.1 0.161 ø8.5 ø0.335 30 1.181 12 15 0.591 0.472 2-ø3.2 ø0.126 mounting holes 14 0.551 6 0.236 9.5 0.374 19.5 0.768 Note: This is the adjustable range of the movable part. Ultra-compact Laser Sensor DIMENSIONS (Unit: mm in) MS-EXL2-5 Back angled mounting bracket 2 3-M3 × 0.5 0.020 14.2 0.559 3.4 0.134 R13 R0.512 16.4 13 24 0.6460.512 0.945 3 0.118 3.05 0.120 3.05 0.120 8 0.315 FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS t1.2 t0.047 14° 186 The CAD data can be downloaded from our website. Sensor mounting bracket (Optional) 1 EX-L200 SERIES 4.5 0.177 16.5 0.650 3 0.118 3 3.2 0.118 0.126 2.5 0.098 16 0.630 13 0.512 t1.5 t0.059 2.5 0.098 2.5 0.098 MICRO PHOTOELECTRIC SENSORS AREA SENSORS SAFETY LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS 10° 8.8 0.346 18.5 0.728 Material: Stainless steel (SUS304) Two M3 (length 14 mm 0.551 in) screws with washers [stainless steel (SUS)] are attached. INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES LASER MARKERS PLC HUMAN MACHINE INTERFACES ENERGY MANAGEMENT SOLUTIONS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS Selection Guide Amplifier Built-in Amplifierseparated EX-L200 HG-C
PF-EXL2-1 价格&库存

很抱歉,暂时无法提供与“PF-EXL2-1”相匹配的价格&库存,您可以联系我们找货

免费人工找货