PM-F64

429 FIBER SENSORS Connector Built-in U-shaped Micro Photoelectric Sensor PM-64 SERIES Related Information ■■General terms and conditions.............. F-7 ■■Glossary of terms......................... P.1455~ Amplifier Built-in ■■Sensor selection guide................... P.427~ ■■General precautions.................... P.1458~ LASER SENSORS PHOTOELECTRIC SENSORS Conforming to EMC Directive MICRO PHOTOELECTRIC SENSORS Recognition AREA SENSORS LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC ELECTRICITY PREVENTION DEVICES LASER MARKERS PLC HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS panasonic.net/id/pidsx/global Easy connection with a single touch using commercially-available connectors Built-in connector saves space This greatly reduces the amount of space taken up compared to previous models. The dimension between the beam axis and cable bending part has been reduced to half at maximum. UV CURING SYSTEMS Selection Guide U-shaped Convergent Reflective Previous model Connector type PM-□64 25.4 mm 1.000 in 26 mm 1.024 in 22.3 mm 0.878 in PM-24 PM-44/PM-54 The connector connection type eliminates the extra work of soldering and insulation processing. In addition, the connector used is a commercially-available multipurpose connector which is also currently used by the DP-100 series of digital pressure sensors. 23 mm 0.906 in 11 mm 0.433 in 2.1 mm 0.083 in PM-64 Can be connected using commerciallyavailable connectors Approximately 60 % of previous model Detachable Commerciallyavailable connector Digital pressure sensor DP-100 series Connector Built-in U-shaped Micro Photoelectric Sensor PM-64 SERIES APPLICATIONS 430 FIBER SENSORS Positioning of a pallet Sensing the starting point and overrun of a moving body Overrun sensing Dog Starting point sensing Overrun sensing Sensing the starting point on a rotating body The starting point can be sensed by making a slit in the rotating body. LASER SENSORS Starting point Starting point and overrun is sensed using the dog on the base. Pallet is stopped by sensing the dog. Improved maintenance and workability significantly reduces total cost The processing cost of the connector cables can be drastically reduced through the use of commercially-available crimping connectors. Previous model (Soldering: Connector type) • Automation is hard because of soldering. • Insulation processing is required. • A large space is necessary at the terminal area. • Connectors are not reliable (not fully connected or seated). Insulation processing Soldering Previous model (Converted to the cable-type commercially-available connector) Intermediate box Commercially-available connector • Crimping processing is required in two places. • A set of commercially-available connectors is necessary. • There are many processes for cable connections. Crimping processing AREA SENSORS LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC ELECTRICITY PREVENTION DEVICES PLC HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS Suggestion PM-64 series (Commercially-available connectors can be used) MICRO PHOTOELECTRIC SENSORS LASER MARKERS • An intermediate box is required. Crimping processing PHOTOELECTRIC SENSORS • Crimping processing makes automation possible so the connectors are also highly reliable. • Soldering, insulation processing, and an intermediate box are not necessary. • Connectors are widely available. • Mounting in a small space is easy. • Strongly connected using a locking connector. • 1 m 3.281 ft, 2 m 6.562 ft, 3 m 9.843 ft, and 5 m 16.404 ft connector cables are available. MACHINE VISION SYSTEMS UV CURING SYSTEMS Selection Guide U-shaped Convergent Reflective PM-64 PM-24 PM-44/PM-54 431 Connector Built-in U-shaped Micro Photoelectric Sensor PM-64 SERIES ORDER GUIDE FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS Type K type MICRO PHOTOELECTRIC SENSORS Appearance (mm in) AREA SENSORS Sensing range Model No. PRESSURE / FLOW SENSORS 13.7 0.539 in MEASUREMENT SENSORS STATIC ELECTRICITY PREVENTION DEVICES LASER MARKERS T type 26 1.024 in 15.5 0.610 in 26.2 1.031 in 5 mm 0.197 in (fixed) 15.7 0.618 in 15.5 0.610 in 22.7 0.894 in 13.8 0.543 in PLC F type HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS 23 0.906 in 14 0.551 in R type UV CURING SYSTEMS NPN open-collector transistor PM-K64P PNP open-collector transistor PM-T64 NPN open-collector transistor PM-T64P PNP open-collector transistor PM-T64W (Note) NPN open-collector transistor PM-L64 NPN open-collector transistor PM-L64P PNP open-collector transistor PM-Y64 NPN open-collector transistor PM-Y64P PNP open-collector transistor PM-F64 NPN open-collector transistor PM-F64P PNP open-collector transistor PM-R64 NPN open-collector transistor PM-R64P PNP open-collector transistor 14 0.551 in 13.4 0.528 in FA COMPONENTS MACHINE VISION SYSTEMS PM-K64 23 0.906 in L type WIRE-SAVING SYSTEMS Small and built-in connector type SIMPLE WIRE-SAVING UNITS 16.7 0.657 in Y type SENSOR OPTIONS 23 0.906 in 26 1.024 in PARTICULAR USE SENSORS Output operation 7 0.207 in 23 0.906 in 26 1.024 in LIGHT CURTAINS / SAFETY COMPONENTS INDUCTIVE PROXIMITY SENSORS Output 23 0.906 in 13.4 0.528 in Incorporated with 2 outputs: Light-ON / Dark-ON Note: PM-T64W is compatible with our conventional PM-T53(B). OPTIONS Selection Guide U-shaped Convergent Reflective PM-64 PM-24 PM-44/ PM-54 Designation Connector attached cable Connector attached cable Flexible cable Connector Model No. Description CN-14A-C1 Length: 1m 3.281 ft CN-14A-C2 Length: 2m 6.562 ft CN-14A-C3 Length: 3m 9.843 ft CN-14A-C5 Length: 5m 16.404 ft CN-14A-R-C1 Length: 1m 3.281 ft CN-14A-R-C2 Length: 2m 6.562 ft CN-14A-R-C3 Length: 3m 9.843 ft CN-14A-R-C5 Length: 5m 16.404 ft CN-14A Set of 10 housings and 40 contacts Connector attached cable • CN-14A(-R)-C□ 0.2 mm2 4-core cabtyre cable with connector on one end Cable outer diameter: ø3.7mm ø0.146 in Recommended connector Contact: SPHD-001T-P0.5, Housing: PAP-04V-S (Manufactured by J.S.T. Mfg. Co., Ltd.) Note: Contact the manufacturer for details of the recommended products. Recommended crimping tool Model No. : YC-610R (Manufactured by J.S.T. Mfg. Co., Ltd.) Note: Contact the manufacturer for details of the recommended products. Connector • CN-14A Contact 4 Housing Connector Built-in U-shaped Micro Photoelectric Sensor PM-64 SERIES SPECIFICATIONS Model No. Type Item FIBER SENSORS T type L type NPN output PM-K64 PM-T64(W) PM-L64 PM-Y64 PM-F64 PM-R64 PNP output PM-K64P PM-T64P PM-L64P PM-Y64P PM-F64P PM-R64P Sensing range Minimum sensing object Y type 5 to 24 V DC ±10 %   Ripple P-P 10 % or less Current consumption 15 mA or less NPN open-collector transistor • Maximum sink current: 50 mA • Applied voltage: 30 V DC or less (between output and 0 V) • Residual voltage: 0.7 V or less (at 50 mA sink current) 0.4 V or less (at 16 mA sink current) Utilization category PNP open-collector transistor • Maximum source current: 50 mA • Applied voltage: 30 V DC or less (between output and +V) • Residual voltage: 0.7 V or less (at 50 mA source current) 0.4 V or less (at 16 mA source current) DC-12 or DC-13 Incorporated with 2 outputs: Light-ON / Dark-ON Under light received condition: 20 µs or less Under light interrupted condition: 100 µs or less (Response frequency: 1 kHz or more) (Note 4) Response time Operation indicator Orange LED (lights up under light received condition) Pollution degree 3 (Industrial environment) –25 to +55 °C –13 to +131 °F (No dew condensation or icing allowed), Storage: –30 to +80 °C –22 to +176 °F Ambient humidity 35 to 85 % RH, Storage: 5 to 95 % RH (Note 5) Ambient illuminance Fluorescent light: 1,000 ℓx at the light-receiving face EMC EN 60947-5-2 Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure Insulation resistance 50 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure Vibration resistance 10 to 2,000 Hz frequency, 1.5 mm 0.059 in amplitude in X, Y and Z directions for two hours each Shock resistance 15,000 m/s2 acceleration (1,500 G approx.) in X, Y and Z directions for three times each Emitting element Infrared LED (Peak emission wavelength: 940 nm 0.037 mil, non-modulated) Material MICRO PHOTOELECTRIC SENSORS LIGHT CURTAINS / SAFETY COMPONENTS 0.01 mm 0.0004 in or less (Note 3) Output operation PHOTOELECTRIC SENSORS 0.8 × 1.8 mm 0.031 × 0.071 in opaque object Repeatability Ambient temperature R type AREA SENSORS 0.05 mm 0.002 in or less (Note 2) Supply voltage F type 5 mm 0.197 in (fixed) Hysteresis Environmental resistance LASER SENSORS Small and built-in connector type K type Output 432 PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC ELECTRICITY PREVENTION DEVICES LASER MARKERS PLC HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS Enclosure: PBT, Slit cover: Polycarbonate Cable length Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (Note 6) Weight Net weight: 3 g approx. Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F. 2) This is the value when a sensing object is moved in a lateral direction to the U-shape. 3) This is the value when a sensing object is moved in a lateral direction to the U-shape and when the inserting length of the sensing board is 5 mm 0.197 in. 4) The response frequency is the value when the disc, given in the figure below, is rotated. Disk Disk Selection Guide U-shaped Convergent Reflective 1.8 mm 0.071 in PM-64 PM-24 t = 0.2 mm 0.008 in 1.6 mm 0.063 in 1.6 mm 0.063 in 5) 5-35% RH in an ambient temperature of +23 °C +73.4 °F. 6) Confirm that the sensor terminal voltage is more than 4.5 V when using an extension of over 20 m 65.617 ft. PM-44/ PM-54 433 Connector Built-in U-shaped Micro Photoelectric Sensor I/O CIRCUIT AND WIRING DIAGRAMS FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS PM-□64(W) NPN output type I/O circuit diagram MICRO PHOTOELECTRIC SENSORS LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC ELECTRICITY PREVENTION DEVICES (Brown) +V ZD1 (Black) Output 1 Load (Note 1,2) 50 mA max. (White) Output 2 (Note 1,2) Tr1 ZD2 Tr2 MACHINE VISION SYSTEMS UV CURING SYSTEMS – 5 to 24 V DC ±10 % 1 Users’ circuit Notes: 1) Make sure to connect terminals correctly as the sensor does not incorporate a reverse polarity protection circuit. Further, the output is not incorporated with a short-circuit protection circuit. Do not connect it directly to a power supply or a capacitive load. Faulty wiring may result in damage. 2) Ensure to insulate the unused output wire. U-shaped Convergent Reflective I/O circuit diagram 1 +V 2 Output1: Light-ON 3 Output2: Dark-ON 4 0V Terminal arrangement diagram Color code of connector attached cable (Brown) +V ZD1 Tr1 ZD2 50 mA max. (Black) Output 1 (Note 1,2) 50 mA max. Tr2 (White) Output 2 (Note 1,2) Load (Blue) 0 V Internal circuit + Load – 5 to 24 V DC ±10 % 1 Users’ circuit Notes: 1) Make sure to connect terminals correctly as the sensor does not incorporate a reverse polarity protection circuit. Further, the output is not incorporated with a short-circuit protection circuit. Do not connect it directly to a power supply or a capacitive load. Faulty wiring may result in damage. 2) Ensure to insulate the unused output wire. SENSING CHARACTERISTICS (TYPICAL) PM-K64(P)  PM-L64(P) Sensing position PM-44/ PM-54 Designation PNP output type PM-64 PM-24 4 3 PM-□64P Symbols … ZD1, ZD2 : Surge absorption zener diode Tr1,Tr2 : PNP output transistor Selection Guide 2 Symbols … ZD1, ZD2 : Surge absorption zener diode Tr1,Tr2 : NPN output transistor ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS + Terminal No. Internal circuit Sensor circuit HUMAN MACHINE INTERFACES Load 50 mA max. (Blue) 0 V LASER MARKERS PLC Terminal arrangement diagram Color code of connector attached cable Sensor circuit AREA SENSORS PM-64 SERIES DarkON DarkON 9 mm 0.354 in ℓ 7 mm 0.276 in ℓ 2.6 mm 0.102 in LightON 0 Beam axis 1 2 3 0.039 0.079 0.118 Operating point ℓ (mm in) 4 0.157 LightON 1 2 3 0.039 0.079 0.118 Operating point ℓ (mm in) 4 0.157 2 3 4 Terminal No. Designation 1 +V 2 Output1: Light-ON 3 Output2: Dark-ON 4 0V Connector Built-in U-shaped Micro Photoelectric Sensor PRECAUTIONS FOR PROPER USE PM-64 SERIES 434 Refer to p.1458~ for general precautions. LASER SENSORS Cable extension • Never use this product as a sensing device for personnel protection. • In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. • Cable extension is possible up to an overall length of 100 m 328.084 ft with a 0.3 mm2, or more, cable. However, since a voltage drop shall occur due to the cable extension, ensure that the power supply voltage at the end of the cable attached to the sensor or at the sensor terminals is within the rating. Make sure to connect terminals correctly as the sensor does not incorporate a reverse polarity protection circuit. Further, the output is not incorporated with a short-circuit protection circuit. Do not connect it directly to a power supply or a capacitive load. Faulty wiring may result in damage. Mounting • When fixing the sensor with screws, use M3 screws and the tightening torque should be 0.5 N·m or less. Further, use small, round type plain washers (ø6 mm ø0.236 in). Total cable length 100 m 328.084 ft Connector +V attached cable Extension cable Output Supply voltage: 4.5 V or more 0V + – 5 to 24V DC ±10 % But, when the overall cable length, including the cable attached to the sensor, is as given below, there is no need to confirm the voltage. ) Wiring Connection method • Insert the connector attached cable CN-14A(-R)-C□ in the connector part of this product as shown in the right figure. 1 2 3 4 Connector pin No. Terminal designation 1 +V 2 Projection CN-14A(-R)-C□ Housing: PAP-04V-S Manufactured by J.S.T. Mfg. Co., Ltd. ( 3 Output 1 Output 2 ) 4 0V Disconnection method MICRO PHOTOELECTRIC SENSORS AREA SENSORS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS Conductor crosssection area of extension cable Total cable length SIMPLE WIRE-SAVING UNITS 0.08 to 0.1 mm2 Up to 5 m 16.404 ft WIRE-SAVING SYSTEMS 2 0.2 mm Up to 10 m 32.808 ft 0.3 mm2 Up to 20 m 65.617 ft Others ( PHOTOELECTRIC SENSORS LIGHT CURTAINS / SAFETY COMPONENTS M3 screws Spring washer Plain washer Outer diameter ø6 mm ø0.236 in FIBER SENSORS • Since the sensor is intended for use inside machines, no special countermeasures have been taken against extraneous light. Take care that extraneous light is not directly incident on the beam receiving section. • Do not use during the initial transient time (50 ms) after the power supply is switched on. • If the sensor is used in a place having excessive dust, periodically clean the emitting and receiving sections with a dry, soft cloth. • If there is a large surge generating equipment, such as, motor, solenoid, electromagnetic valve, etc., in the vicinity of the sensor, use a surge absorber on that equipment. Further, do not run the sensor cables along power lines and use a capacitor between +V and 0 V, if required. Use the sensor after confirming that the surge has been eliminated. MEASUREMENT SENSORS STATIC ELECTRICITY PREVENTION DEVICES LASER MARKERS PLC HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS Selection Guide U-shaped Convergent Reflective • Pressing the projection of the connector attached cable, pull out the connector. PM-64 Note: Take care that if the cable is pulled out without pressing the projection, the cable may break. PM-44/ PM-54 PM-24 435 FIBER SENSORS LASER SENSORS Connector Built-in U-shaped Micro Photoelectric Sensor DIMENSIONS (Unit: mm in) AREA SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS Sensor 26 1.024 20 0.787 PM-T64(P) Sensor 13.7 0.539 7 0.276 3.5 0.138 7 0.276 3 0.118 Beam axis 2-ø3.2 ø0.126 mounting holes LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS The CAD data in the dimensions can be downloaded from our website. PM-K64(P) PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS PM-64 SERIES 13.4 0.528 5 0.197 7 0.276 Operation indicator (Orange) 2.6 0.102 6.8 0.268 Beam axis width: 0.8 0.031 26 1.024 Beam axis 9 0.354 Locking 3.2 13.8 part 0.126 0.543 23 0.906 7.4 0.291 6.2 4.1 0.244 0.161 3.2 0.126 (2.1 0.083 ) 3.7 0.146 1.7 0.067 20 0.787 SIMPLE WIRE-SAVING UNITS Beam axis width: 0.8 0.031 13 0.512 1.6 0.063 20 0.787 13.4 0.528 5 0.197 2.6 0.102 Beam axis 9 0.354 23 0.906 7.4 0.291 2-mounting oblong holes Connector attached cable CN-14A(-R)-C□ (Optional) Beam axis Operation indicator (Orange) 10.5 0.413 2.1 0.083 ( Locking part 2-mounting oblong holes ) Connector attached cable CN-14A(-R)-C□ (Optional) WIRE-SAVING SYSTEMS MEASUREMENT SENSORS PM-T64W Sensor STATIC ELECTRICITY PREVENTION DEVICES 16.7 0.657 10 0.394 LASER MARKERS PLC 7 0.276 HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS Selection Guide Beam axis width: 0.8 0.031 4.1 0.161 3.2 0.126 13 0.512 6 0.236 4 0.157 Beam axis 23 0.906 20 0.787 26 1.024 1.6 0.063 (2.1 0.083) Locking part 2-mounting oblong holes Sensor PM-44/ PM-54 9 0.354 Beam axis PM-L64 9 0.354 7.2 0.283 20 0.787 2-ø3.2 ø0.126 mounting holes PM-F64(P) Center of beam axis and boss Beam axis width: 0.8 0.031 Connector attached cable CN-14A(-R)-C□ (Optional) Sensor 6.5 0.256 2.5 0.098 Operation indicator (Orange) 13.4 0.528 5 0.197 7 0.276 2.5 0.098 2.6 0.102 9 0.354 23 0.906 6.4 0.252 Beam axis width: 0.8 0.031 2.6 0.102 12.9 0.508 PM-L64 Beam axis and boss Beam axis Beam axis 15.5 0.610 Beam axis width: 0.8 0.031 7 0.276 Locking part 12.8 0.504 13.8 0.543 5 0.197 6.4 0.252 3 0.118 Operation indicator (Orange) 2.1 (0.083 ) Connector attached cable CN-14A(-R)-C□ (Optional) 12.8 0.504 13.4 0.528 5 0.197 2-ø3.5 ø0.138 mounting holes 3.5 0.138 7 0.276 22.7 0.894 Operation indicator (Orange) Locking part Connector attached cable CN-14A(-R)-C□ (Optional) PM-Y64(P) 7 0.276 Beam axis 2-mounting oblong holes 9 15.5 0.354 0.610 10.5 0.413 3.5 0.138 7 15.7 0.276 0.618 3.2 0.126 2.6 8.3 0.102 0.327 Beam axis 9 0.354 26.2 1.031 20 0.787 2.1 (0.083 ) 13.4 0.528 5 0.197 7.4 0.291 U-shaped PM-24 2.6 0.102 Sensor 1.7 0.067 3.7 0.146 Operation indicator (Orange) Convergent Reflective PM-64 PM-L64(P) ø2.4 ø0.094 Center of beam axis and boss 16.3 0.642 8.2 0.323 Locking part Connector attached cable CN-14A(-R)-C□ (Optional) 2.1 ( 0.083 ) 7 0.276 14 0.551 ø3.2 ø0.126 mounting holes Connector Built-in U-shaped Micro Photoelectric Sensor DIMENSIONS (Unit: mm in) PM-64 SERIES The CAD data in the dimensions can be downloaded from our website. PM-R64(P) PHOTOELECTRIC SENSORS 3 0.118 MICRO PHOTOELECTRIC SENSORS Beam axis and boss 7 0.276 Operation indicator (Orange) Center of beam axis and boss 2.5 0.098 2.6 0.102 7 0.276 AREA SENSORS Center of beam axis and boss 13.4 0.528 5 0.197 LIGHT CURTAINS / SAFETY COMPONENTS Beam axis width: 0.8 0.031 PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS 16.3 23 0.642 0.906 9 0.354 8.2 0.323 7 0.276 14 0.551 ø3.2 ø0.126 mounting holes PARTICULAR USE SENSORS 2.1 (0.083 ) Locking part SENSOR OPTIONS Connector attached cable CN-14A(-R)-C□ (Optional) SIMPLE WIRE-SAVING UNITS CN-14A-C□   CN-14A-R-C□ Connector attached cable (Optional) L ( ) 35 1.378 8 0.315 ( ) FIBER SENSORS LASER SENSORS Sensor ø2.4 ø0.094 436 ( ) 50 1.969 8 0.315 ø3.7 ø0.146 cable ( ) • Length L Model No. Length L CN-14A(-R)-C1 1,000 39.370 CN-14A(-R)-C2 2,000 78.740 CN-14A(-R)-C3 3,000 118.110 CN-14A(-R)-C5 5,000 196.850 WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC ELECTRICITY PREVENTION DEVICES LASER MARKERS PLC HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS Selection Guide U-shaped Convergent Reflective PM-64 PM-24 PM-44/ PM-54