395
FIBER
SENSORS
U-shaped Micro Photoelectric Sensor
Amplifier Built-in
PM-25 SERIES PM-45 SERIES PM-65 SERIES
Related Information
■■General terms and conditions.............. F-3
■■Glossary of terms / General precautions.......P.1549~ / P.1552~
■■Selection guide.............................. P.393~
■■Korea’s S-mark............................... P.1602
LASER
SENSORS
PHOTOELECTRIC
SENSORS
Recognition
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
Certified
(Some models only)
SAFETY LIGHT
CURTAINS /
SAFETY COMPONENTS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
panasonic.net/id/pidsx/global
STATIC
CONTROL
DEVICES
LASER
MARKERS
PLC
HUMAN MACHINE
INTERFACES
ENERGY
MANAGEMENT
SOLUTIONS
FA COMPONENTS
MACHINE VISION
SYSTEMS
UV CURING
SYSTEMS
Selection
Guide
U-shaped
Convergent
Reflective
PM-25/PM-45/
PM-65
PNP output
type available
One step ahead in performance and mounting ease
Three protection circuits standard on all models
PM-25/45/65 SERIES
All models are standardly equipped with the following
protection circuits in their compact bodies. These
protection circuits minimize the possibility of sensor
malfunctions caused by erroneous wiring.
1 Reverse supply polarity protection circuit
2 Reverse output polarity protection circuit
3 Output short-circuit protection circuit
Ample beam emitting / receiving distance of
PM-25/45/65 SERIES
6 mm 0.236 in
The beam emitting and receiving sections are 0.5 mm
0.02 in thinner than those on our conventional models
while their external dimensions are the same. As a
result, the distance between the beam emitting point and
receiving point increased by 1 mm 0.039 in. The wider
distance means less possibility of collision between the
sensing section and sensing object.
13.4 0.528
6 0.236
3.7 0.146
Industry’s first*! IP64 rating
PM-25/45 SERIES
*As of April 2017, in-company survey.
Our original integrated molding method has eliminated
grooves and gaps on the sensing surface and main
body, thus reducing the possibility of malfunctions
caused by splashing water or dust.
No ridges on
sensing surface
No joint seam
Beam marks for easy adjustment
PM-25/45/65 SERIES
The upper-limit and lower-limit positions of beam can
be visually confirmed from the front, back, right and left
sides of the sensor unit. This allows easy adjustment of
the position of sensing object.
Upper-limit position
of beam axis
Lower-limit position
of beam axis
(Unit: mm in)
< Front / back >
Beam width
Beam width marks are provided on
PM25 series and PM45 series.
< Right / left >
U-shaped Micro Photoelectric Sensor
PM-25 SERIES PM-45 SERIES PM-65 SERIES
APPLICATIONS
FIBER
SENSORS
Positioning of a pallet
Sensing the starting point and overrun
of a moving body
Overrun sensing
Sensing the starting point on a
rotating body
Starting
point
Dog
Starting point sensing
Overrun
sensing
Pallet is stopped by sensing the dog*.
The starting
point can be
sensed by
making a slit in
the rotating
body.
The large operation indicator (orange) lights up when the
beam enters. The indicator is easy to see from above and
from the sides.
PM-45 SERIES
Compact size
All new models require significantly less mounting space
than our conventional models when mounted with the same
pitch. What’s more, the new models can directly replace our
conventional models currently in use.
PM-L45
INDUCTIVE
PROXIMITY
SENSORS
10
0.394
26 1.024
18.5 0.728
(Unit: mm in)
All models easy to
mount with M3 screws
PM-25/45/65 SERIES
The sensor unit can be installed with one or two M3 screws.
* M3 screws and washers are not included.
■ Models requiring one M3 screw for installation
PM-F25, PM-R25, PM-F65, PM-R65
■ Models requiring two M3 screws for installation
Models other than above
Resistant to vibrations
and impacts
PM-25/45/65 SERIES
The sections where stress concentrates, such as the
connecting section of the cable and internal circuit, are
covered with a resin. This helps prevent malfunctions
caused by vibrations and impacts.
Resin-filled structure
(cross-sectional view)
PARTICULAR
USE
SENSORS
VARIATION
SENSOR
OPTIONS
Sensors come in various shapes to suit a wide range of
mounting conditions
SIMPLE
WIRE-SAVING
UNITS
PM-25 SERIES
Ultra-small / Cable type
Easy mounting with M2/M3 screws!
NPN output
1 m 3.281 ft cable 3 m 9.843 ft cable
PNP output
1 m 3.281 ft cable
3 m 9.843 ft
cable
1 m 3.281 ft bendingresistant cable
1 m 3.281 ft bendingresistant cable
PM-45 SERIES
Compact size!
15.5 0.610
14.6 0.575
MICRO
PHOTOELECTRIC
SENSORS
PRESSURE /
FLOW
SENSORS
Compact / Cable type
Conventional
model
(L type)
PHOTOELECTRIC
SENSORS
SAFETY LIGHT
CURTAINS /
SAFETY
COMPONENTS
Starting point and overrun is
sensed using the dog* on the base.
Large and easy to see
Multi-angle operation indicator PM-25/45/65 SERIES
LASER
SENSORS
AREA
SENSORS
*“Dog” refers to the sensing object for activating the sensor’s detecting operation.
26 1.024
396
NPN output
1 m 3.281 ft cable 3 m 9.843 ft cable
1 m 3.281 ft bendingresistant cable
PNP output
1 m 3.281 ft cable 3 m 9.843 ft cable
1 m 3.281 ft bendingresistant cable
Compact / Connector built-in type PM-65 SERIES
Easy connection with a single touch using commerciallyavailable connectors
NPN output
Connector attached cable
1 m 3.281 ft, 2 m 6.562 ft,
3 m 9.843 ft, 5 m 16.404 ft
Connector attached bending-resistant cable
1 m 3.281 ft, 2 m 6.562 ft,
3 m 9.843 ft, 5 m 16.404 ft
PNP output
Connector attached cable
1 m 3.281 ft, 2 m 6.562 ft,
3 m 9.843 ft, 5 m 16.404 ft
Connector attached bending-resistant cable
1 m 3.281 ft, 2 m 6.562 ft,
3 m 9.843 ft, 5 m 16.404 ft
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC
CONTROL
DEVICES
LASER
MARKERS
PLC
HUMAN
MACHINE
INTERFACES
ENERGY
MANAGEMENT
SOLUTIONS
FA
COMPONENTS
MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
Selection
Guide
U-shaped
Convergent
Reflective
PM-25/PM-45/
PM-65
397
FIBER
SENSORS
LASER
SENSORS
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
U-shaped Micro Photoelectric Sensor
PM-25 SERIES PM-45 SERIES PM-65 SERIES
Ultra-small / Cable type PM-25 SERIES
Easy mounting with M2/M3 screws!
Cable type
NPN output
1 m 3.281 ft cable 3 m 9.843 ft cable
Built-in connector
PNP output
1 m 3.281 ft cable
3 m 9.843 ft
cable
*
1 m 3.281 ft bendingresistant cable
1 m 3.281 ft bendingresistant cable
Recognition
Certified
* NPN output / 1 m 3.281 ft cable length type only
(Excluding bending-resistant cable type)
AREA
SENSORS
SAFETY LIGHT
CURTAINS /
SAFETY
COMPONENTS
PM-K25
PRESSURE /
FLOW
SENSORS
PM-U25
PM-F25
PM-R25
ORDER GUIDE
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE
SENSORS
PM-L25
Type
Appearance (mm in)
Sensing range
SENSOR
OPTIONS
K type
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
6 0.236
12.3
0.484
23.9
0.941
Model No.
Cable length
PM-K25
1 m 3.281 ft
PM-K25-R
1 m 3.281 ft,
bending-resistant cable
PM-K25-C3
3 m 9.843 ft
MEASUREMENT
SENSORS
PM-K25-P
1 m 3.281 ft
STATIC
CONTROL
DEVICES
PM-L25
1 m 3.281 ft
PM-L25-R
1 m 3.281 ft,
bending-resistant cable
PM-L25-C3
3 m 9.843 ft
PM-L25-P
1 m 3.281 ft
PM-U25
1 m 3.281 ft
PM-U25-R
1 m 3.281 ft,
bending-resistant cable
PM-U25-C3
3 m 9.843 ft
PM-U25-P
1 m 3.281 ft
PM-F25
1 m 3.281 ft
PM-F25-R
1 m 3.281 ft,
bending-resistant cable
PM-F25-C3
3 m 9.843 ft
PM-F25-P
1 m 3.281 ft
PM-R25
1 m 3.281 ft
PM-R25-R
1 m 3.281 ft,
bending-resistant cable
PM-R25-C3
3 m 9.843 ft
PM-R25-P
1 m 3.281 ft
L type
LASER
MARKERS
PLC
12 0.472
12
0.472
13.4
0.528
MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
Selection
Guide
U type
FA
COMPONENTS
F type
ENERGY
MANAGEMENT
SOLUTIONS
Ultra-small / Cable type
HUMAN
MACHINE
INTERFACES
6 0.236
16
0.630
13.4
0.528
11.7 0.461
12.5
0.492
13.4
0.528
U-shaped
PM-25/PM-45/
PM-65
R type
Convergent
Reflective
11.7 0.461
13.4
0.528
12.5
0.492
6 mm 0.236 in
(fixed)
Output
Output operation
NPN open-collector
transistor
PNP open-collector
transistor
NPN open-collector
transistor
PNP open-collector
transistor
NPN open-collector
transistor
Incorporated with 2 outputs:
Light-ON/Dark-ON
PNP open-collector
transistor
NPN open-collector
transistor
PNP open-collector
transistor
NPN open-collector
transistor
PNP open-collector
transistor
Note: The suffix “-R” in the model No. indicates a bending-resistant cable type. The suffix “-C3” indicates a 3 m 9.843 ft cable length type.
OPTIONS
Designation
Model No.
Description
Mounting screw
MS-M2
Mounting screw with washers for the ultra-small type sensor
(50 pcs. lot). It can mount securely as it is spring washer attached.
Mounting screw
• MS-M2
M2 (length 10 mm 0.394 in) screw
with a spring washer
U-shaped Micro Photoelectric Sensor
PM-25 SERIES PM-45 SERIES PM-65 SERIES
398
FIBER
SENSORS
SPECIFICATIONS
LASER
SENSORS
Model No.
Type
Item
NPN output
PM-□25
PNP output
PM-□25-P
Bending-resistant cable
3 m 9.843 ft cable
PM-□25-R
PM-□25-C3
―
―
Sensing range
6 mm 0.236 in (fixed)
Minimum sensing object
INDUCTIVE
PROXIMITY
SENSORS
0.05 mm 0.002 in or less
Repeatability
0.01 mm 0.0004 in or less
Supply voltage
PARTICULAR
USE
SENSORS
5 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption
15 mA or less
SENSOR
OPTIONS
PNP open-collector transistor
NPN open-collector transistor
•• Maximum source current: 50 mA
•• Maximum sink current: 50 mA
•• Applied voltage: 30 V DC or less (between output and +V)
•• Applied voltage: 30 V DC or less (between output and 0 V)
•• Residual voltage: 2 V or less (at 50 mA source current)
•• Residual voltage: 2 V or less (at 50 mA sink current)
1 V or less (at 16 mA source current)
1 V or less (at 16 mA sink current)
Output
Output operation
Incorporated with 2 outputs: Light-ON/Dark-ON
Short-circuit protection
Under light received condition: 20 μs or less
Under light interrupted condition: 80 μs or less
(Maximum response frequency: 3 kHz) (Note 2)
Operation indicator
HUMAN
MACHINE
INTERFACES
IP64 (IEC)
Ambient temperature
(Note 3, 4)
–25 to +55 °C –13 to +131 °F (No dew condensation or icing allowed), Storage: –30 to +80 °C –22 to +176 °F
Ambient humidity
Fluorescent light: 1,000 ℓx or less at the light-receiving face
Voltage withstandability
1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance
20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance
10 to 2,000 Hz frequency, 1.5 mm 0.059 in double amplitude (maximum acceleration 196 m/s2) in X, Y and Z directions for two hours each
Shock resistance
Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, non-modulated)
Material
Enclosure: PBT, Display section: Polycarbonate
0.09 mm2 4-core cabtyre cable, PVC,
1 m 3.281 ft long
Cable
0.1 mm2 4-core bending-resistant cabtyre
cable, PVC, 1 m 3.281 ft long (Note 5, 6)
0.09 mm2 4-core cabtyre cable, PVC,
3 m 9.843 ft long
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (Note 7)
Cable extension
Weight
Net weight: 10 g approx., Gross weight: 15 g approx.
Net weight: 30 g approx.,
Gross weight: 35 g approx.
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F.
2) The response frequency is the value when the disc, given in the figure below, is rotated.
Disc
1.8 mm 0.071 in
Disc
t = 0.2 mm 0.008 in
1.6 mm 0.063 in
MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
15,000 m/s2 acceleration (1,500 G approx.) in X, Y and Z directions three times each
Emitting element
ENERGY
MANAGEMENT
SOLUTIONS
FA
COMPONENTS
5 to 85 % RH, Storage: 5 to 95 % RH
Ambient illuminance
MEASUREMENT
SENSORS
PLC
3
Protection
WIRE-SAVING
SYSTEMS
LASER
MARKERS
Orange LED (lights up under light received condition)
Pollution degree
SIMPLE
WIRE-SAVING
UNITS
STATIC
CONTROL
DEVICES
Incorporated
Response time
AREA
SENSORS
PRESSURE /
FLOW
SENSORS
0.8 × 1.2 mm 0.031 × 0.047 in opaque object
Hysteresis
MICRO
PHOTOELECTRIC
SENSORS
SAFETY LIGHT
CURTAINS /
SAFETY
COMPONENTS
EMC Directive, RoHS Directive
CE marking directive compliance
Environmental resistance
PHOTOELECTRIC
SENSORS
Ultra-small / Cable type
1.6 mm 0.063 in
3) In case the PM-25 series is used at an ambient temperature of +50 °C +122 °F, or more, make sure to mount it on a metal body.
4) Note that the cable of PM-□25-R loses its flexibility when the ambient temperature decreases to about -10 °C +14 F°.
5) The cable of PM-□25-R is a bending-resistant cable usable on a moving base. When the sensor is mounted on a moving base, secure the sensor cable
joint at the unit in place so that stress is not applied to it.
6) When storing PM-□25-R, make sure that the cable does not come into contact with the sensing section or operation indicator.
7) If the cable is extended to 20 m 65.617 ft or longer, confirm that the supply voltage at the end of the cable attached to the sensor is 4.5 V or higher.
Selection
Guide
U-shaped
Convergent
Reflective
PM-25/PM-45/
PM-65
399
FIBER
SENSORS
LASER
SENSORS
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
U-shaped Micro Photoelectric Sensor
PM-25 SERIES PM-45 SERIES PM-65 SERIES
Compact / Cable type PM-45 SERIES
Compact size!
Cable type
NPN output
1 m 3.281 ft cable 3 m 9.843 ft cable
1 m 3.281 ft bendingresistant cable
Built-in connector
PNP output
1 m 3.281 ft cable 3 m 9.843 ft cable
1 m 3.281 ft bendingresistant cable
*
Recognition
Certified
* NPN output / 1 m 3.281 ft cable length type only
AREA
SENSORS
SAFETY LIGHT
CURTAINS /
SAFETY
COMPONENTS
PM-K45
PRESSURE /
FLOW
SENSORS
PM-L45
PM-Y45
Type
Appearance (mm in)
Sensing range
SENSOR
OPTIONS
K type
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
7 0.276
25.4
1.000
21.3
0.839
MEASUREMENT
SENSORS
T type
STATIC
CONTROL
DEVICES
LASER
MARKERS
13.7 0.539
26
1.024
PLC
18.1
0.713
UV
CURING
SYSTEMS
Selection
Guide
U-shaped
Convergent
Reflective
L type
14.6 0.575
26
1.024
7 0.276
6 mm 0.236 in
(fixed)
14.6 0.575
Y type
MACHINE
VISION
SYSTEMS
F type
FA
COMPONENTS
Compact / Cable type
HUMAN
MACHINE
INTERFACES
ENERGY
MANAGEMENT
SOLUTIONS
PM-F45
PM-R45
ORDER GUIDE
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE
SENSORS
PM-T45
13.4
0.528
20.6
0.811
13 0.512
13.7
0.539
21.3
0.839
R type
PM-25/PM-45/
PM-65
13 0.512
13.7
0.539
21.3
0.839
Model No.
Cable length
PM-K45
1 m 3.281 ft
PM-K45-C3
3 m 9.843 ft
PM-K45-P
1 m 3.281 ft
PM-K45-P-C3
3 m 9.843 ft
PM-T45
1 m 3.281 ft
PM-T45-C3
3 m 9.843 ft
PM-T45-P
1 m 3.281 ft
PM-T45-P-C3
3 m 9.843 ft
PM-L45
1 m 3.281 ft
PM-L45-C3
3 m 9.843 ft
PM-L45-P
1 m 3.281 ft
PM-L45-P-C3
3 m 9.843 ft
PM-Y45
1 m 3.281 ft
PM-Y45-C3
3 m 9.843 ft
PM-Y45-P
1 m 3.281 ft
PM-Y45-P-C3
3 m 9.843 ft
PM-F45
1 m 3.281 ft
PM-F45-C3
3 m 9.843 ft
PM-F45-P
1 m 3.281 ft
PM-F45-P-C3
3 m 9.843 ft
PM-R45
1 m 3.281 ft
PM-R45-C3
3 m 9.843 ft
PM-R45-P
1 m 3.281 ft
PM-R45-P-C3
3 m 9.843 ft
Note: The suffix “-C3” in the model No. indicates a 3 m 9.843 ft cable length type.
Output
Output operation
NPN open-collector
transistor
PNP open-collector
transistor
NPN open-collector
transistor
PNP open-collector
transistor
NPN open-collector
transistor
PNP open-collector
transistor
NPN open-collector
transistor
PNP open-collector
transistor
NPN open-collector
transistor
PNP open-collector
transistor
NPN open-collector
transistor
PNP open-collector
transistor
Incorporated with 2 outputs:
Light-ON/Dark-ON
U-shaped Micro Photoelectric Sensor
PM-25 SERIES PM-45 SERIES PM-65 SERIES
400
FIBER
SENSORS
SPECIFICATIONS
LASER
SENSORS
Model No.
Type
Item
3 m 9.843 ft cable
NPN output
PM-□45
PM-□45-C3
PNP output
PM-□45-P
PM-□45-P-C3
EMC Directive, RoHS Directive
CE marking directive compliance
Sensing range
6 mm 0.236 in (fixed)
Minimum sensing object
0.8 × 1.2 mm 0.031 × 0.047 in opaque object
Hysteresis
0.01 mm 0.0004 in or less
Supply voltage
5 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption
15 mA or less
Output operation
Incorporated with 2 outputs: Light-ON/Dark-ON
Short-circuit protection
Incorporated
Under light received condition: 20 μs or less
Under light interrupted condition: 80 μs or less
(Maximum response frequency: 3 kHz) (Note 2)
Response time
Operation indicator
Orange LED (lights up under light received condition)
Pollution degree
3
Protection
–25 to +55 °C –13 to +131 °F (No dew condensation or icing allowed), Storage: –30 to +80 °C –22 to +176 °F
Ambient humidity
5 to 85 % RH, Storage: 5 to 95 % RH
Ambient illuminance
Fluorescent light: 1,000 ℓx or less at the light-receiving face
Voltage withstandability
1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance
20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance
10 to 2,000 Hz frequency, 1.5 mm 0.059 in double amplitude (maximum acceleration 196 m/s2) in X, Y and Z directions for two hours each
Shock resistance
PRESSURE /
FLOW
SENSORS
PARTICULAR
USE
SENSORS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC
CONTROL
DEVICES
LASER
MARKERS
PLC
ENERGY
MANAGEMENT
SOLUTIONS
FA
COMPONENTS
MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
15,000 m/s2 acceleration (1,500 G approx.) in X, Y and Z directions three times each
Emitting element
Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, non-modulated)
Material
Enclosure: PBT, Display section: Polycarbonate
0.09 mm 4-core cabtyre cable, PVC, 1 m 3.281 ft long
Cable
2
0.09 mm 4-core cabtyre cable, PVC, 3 m 9.843 ft long
2
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (Note 3)
Cable extension
Weight
Net weight: 10 g approx., Gross weight: 15 g approx.
Disc
Disc
1.8 mm 0.071 in
t = 0.2 mm 0.008 in
1.6 mm 0.063 in
Selection
Guide
U-shaped
Convergent
Reflective
Net weight: 30 g approx., Gross weight: 35 g approx.
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F.
2) The response frequency is the value when the disc, given in the figure below, is rotated.
SAFETY LIGHT
CURTAINS /
SAFETY
COMPONENTS
HUMAN
MACHINE
INTERFACES
IP64 (IEC)
Ambient temperature
AREA
SENSORS
SENSOR
OPTIONS
NPN open-collector transistor
PNP open-collector transistor
•• Maximum sink current: 50 mA
•• Maximum source current: 50 mA
•• Applied voltage: 30 V DC or less (between output and 0 V)
•• Applied voltage: 30 V DC or less (between output and +V)
•• Residual voltage: 2 V or less (at 50 mA sink current)
•• Residual voltage: 2 V or less (at 50 mA source current)
1 V or less (at 16 mA sink current)
1 V or less (at 16 mA source current)
Output
MICRO
PHOTOELECTRIC
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
0.05 mm 0.002 in or less
Repeatability
Environmental resistance
PHOTOELECTRIC
SENSORS
Compact / Cable type
1.6 mm 0.063 in
3) If the cable is extended to 20 m 65.617 ft or longer, confirm that the supply voltage at the end of the cable attached to the sensor is 4.5 V or higher.
PM-25/PM-45/
PM-65
401
FIBER
SENSORS
LASER
SENSORS
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
U-shaped Micro Photoelectric Sensor
PM-25 SERIES PM-45 SERIES PM-65 SERIES
Compact / Connector built-in type PM-65 SERIES
Easy connection with a single touch using commercially-available connectors
Cable type
NPN output
Connector attached cable
1 m 3.281 ft, 2 m 6.562 ft,
3 m 9.843 ft, 5 m 16.404 ft
Connector attached bending-resistant cable
1 m 3.281 ft, 2 m 6.562 ft,
3 m 9.843 ft, 5 m 16.404 ft
Built-in connector
PNP output
Connector attached cable
1 m 3.281 ft, 2 m 6.562 ft,
3 m 9.843 ft, 5 m 16.404 ft
Connector attached bending-resistant cable
1 m 3.281 ft, 2 m 6.562 ft,
3 m 9.843 ft, 5 m 16.404 ft
*
Recognition
Certified
* NPN output type only
AREA
SENSORS
SAFETY LIGHT
CURTAINS /
SAFETY
COMPONENTS
PM-K65
PRESSURE /
FLOW
SENSORS
PM-T65W
PM-L65
PM-Y65
PM-F65
Type
Appearance (mm in)
Sensing range
Model No.
SENSOR
OPTIONS
K type
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
22.4
0.882
26
1.024
13.7 0.539
STATIC
CONTROL
DEVICES
T type
LASER
MARKERS
PLC
HUMAN
MACHINE
INTERFACES
U-shaped
22.4
0.882
16.7 0.657
PM-R65W
L type
13.5 0.531
F type
PM-K65
NPN open-collector
transistor
PM-K65-P
PNP open-collector
transistor
PM-T65
NPN open-collector
transistor
PM-T65-P
PNP open-collector
transistor
PM-T65W
NPN open-collector
transistor
PM-T65W-P
PNP open-collector
transistor
PM-L65
NPN open-collector
transistor
15.7
0.618
PM-L65-P
PNP open-collector
transistor
PM-Y65
NPN open-collector
transistor
PM-Y65-P
PNP open-collector
transistor
PM-F65
NPN open-collector
transistor
PM-F65-P
PNP open-collector
transistor
PM-F65W
NPN open-collector
transistor
PM-F65W-P
PNP open-collector
transistor
PM-R65
NPN open-collector
transistor
PM-R65-P
PNP open-collector
transistor
PM-R65W
NPN open-collector
transistor
PM-R65W-P
PNP open-collector
transistor
6 mm 0.236 in (fixed)
13.4
0.528
13.4
0.528
22.7
0.894
22.4
0.882
13 0.512
13.4
0.528
22.4
0.882
13.5 0.531
R type
Output
Output operation
14.9 0.587
26.2
1.031
14.9 0.587
Convergent
Reflective
PM-25/PM-45/
PM-65
22.4
0.882
Y type
Compact / Connector built-in type
FA
COMPONENTS
Selection
Guide
26
1.024
26
1.024
ENERGY
MANAGEMENT
SOLUTIONS
UV
CURING
SYSTEMS
PM-R65
7 0.276
MEASUREMENT
SENSORS
MACHINE
VISION
SYSTEMS
PM-F65W
ORDER GUIDE
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE
SENSORS
PM-T65
13.4
0.528
22.4
0.882
13 0.512
13.4
0.528
22.4
0.882
Note: P
M-T65W is mounting-compatible with our conventional model “PM-T64W”.
PM-F65W(-P) is mounting-compatible with our conventional model “PM-F54(P)”.
PM-R65W(-P) is mounting-compatible with our conventional model “PM-R54(P)”.
Incorporated with 2 outputs:
Light-ON/Dark-ON
U-shaped Micro Photoelectric Sensor
PM-25 SERIES PM-45 SERIES PM-65 SERIES
402
FIBER
SENSORS
OPTIONS
Designation
LASER
SENSORS
Model No.
Connector
attached cable
Connector
attached cable
Bendingresistant
CN-14A-C1
Length: 1m 3.281 ft
CN-14A-C2
Length: 2m 6.562 ft
CN-14A-C3
Length: 3m 9.843 ft
CN-14A-C5
Length: 5m 16.404 ft
CN-14A-R-C1
Length: 1m 3.281 ft
CN-14A-R-C2
Length: 2m 6.562 ft
CN-14A-R-C3
Length: 3m 9.843 ft
CN-14A-R-C5
Length: 5m 16.404 ft
CN-14A
Connector
Connector attached cable
Description
PHOTOELECTRIC
SENSORS
• CN-14A(-R)-C□
MICRO
PHOTOELECTRIC
SENSORS
0.2 mm2 4-core cabtyre cable with
connector on one end
Cable outer diameter: ø3.7 mm
ø0.146 in
0.2 mm2 4-core cabtyre cable with
connector on one end
Cable outer diameter: ø3.7 mm
ø0.146 in
AREA
SENSORS
SAFETY LIGHT
CURTAINS /
SAFETY
COMPONENTS
Connector
Contact
• CN-14A
Set of 10 housings and 40 contacts
4
Housing
SPECIFICATIONS
Model No.
Mounting-compatible with conventional model (Note 2)
PM-□65
PM-□65W
PNP output
PM-□65-P
PM-□65W-P
EMC Directive, RoHS Directive
CE marking directive compliance
Sensing range
6 mm 0.236 in (fixed)
Minimum sensing object
0.8 × 1.2 mm 0.031 × 0.047 in opaque object
Hysteresis
0.05 mm 0.002 in or less
Repeatability
0.01 mm 0.0004 in or less
Supply voltage
5 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption
15 mA or less
NPN open-collector transistor
PNP open-collector transistor
•• Maximum sink current: 50 mA
•• Maximum source current: 50 mA
•• Applied voltage: 30 V DC or less (between output and 0 V)
•• Applied voltage: 30 V DC or less (between output and +V)
•• Residual voltage: 2 V or less (at 50 mA sink current)
•• Residual voltage: 2 V or less (at 50 mA source current)
1 V or less (at 16 mA sink current)
1 V or less (at 16 mA source current)
Output operation
Incorporated with 2 outputs: Light-ON/Dark-ON
Short-circuit protection
Response time
Incorporated
Under light received condition: 20 μs or less, Under light interrupted condition: 80 μs or less (Maximum response frequency: 3 kHz) (Note 3)
Operation indicator
Environmental resistance
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC
CONTROL
DEVICES
LASER
MARKERS
PLC
HUMAN
MACHINE
INTERFACES
ENERGY
MANAGEMENT
SOLUTIONS
FA
COMPONENTS
MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
Orange LED (lights up under light received condition)
Pollution degree
3
Protection
IP40 (IEC)
Ambient temperature
–25 to +55 °C –13 to +131 °F (No dew condensation or icing allowed), Storage: –30 to +80 °C –22 to +176 °F
Ambient humidity
5 to 85 % RH, Storage: 5 to 95 % RH
Ambient illuminance
Fluorescent light: 1,000 ℓx or less at the light-receiving face
Voltage withstandability
1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance
20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance
10 to 2,000 Hz frequency, 1.5 mm 0.059 in double amplitude (maximum acceleration 196 m/s2) in X, Y and Z directions for two hours each
Shock resistance
15,000 m/s2 acceleration (1,500 G approx.) in X, Y and Z directions three times each
Emitting element
Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, non-modulated)
Material
Enclosure: PBT, Display section: Polycarbonate
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (Note 4)
Cable length
Weight
Net weight: 3 g approx., Gross weight: 3 g approx.
Notes: 1) Where measurement conditions have not been specified precisely,
the conditions used were an ambient temperature of +23 °C +73.4 °F.
2) PM-T65W is mounting-compatible with our conventional model “PM-T64W”.
PM-F65W(-P) is mounting-compatible with our conventional model “PM-F54(P)”.
PM-R65W(-P) is mounting-compatible with our conventional model “PM-R54(P)”.
3)
The response frequency is the value when the disc, given in the figure below, is rotated.
Disc
1.8 mm 0.071 in
Disc
Recommended connector
Contact: SPHD-001T-P0.5, Housing: PAP-04V-S
(Manufactured by J.S.T. Mfg. Co., Ltd.)
Note: Contact the manufacturer for details of the recommended products.
Recommended crimping tool
Model No. : YC-610R (Manufactured by J.S.T. Mfg. Co., Ltd.)
Note: Contact the manufacturer for details of the recommended products.
t = 0.2 mm 0.008 in
1.6 mm 0.063 in
PARTICULAR
USE
SENSORS
SIMPLE
WIRE-SAVING
UNITS
Compact / Connector built-in type
NPN output
Output
INDUCTIVE
PROXIMITY
SENSORS
SENSOR
OPTIONS
Type
Item
PRESSURE /
FLOW
SENSORS
1.6 mm 0.063 in
4) If the cable is extended to 20 m 65.617 ft or longer, confirm that the supply
voltage at the end of the cable attached to the sensor is 4.5 V or higher.
Selection
Guide
U-shaped
Convergent
Reflective
PM-25/PM-45/
PM-65
403
U-shaped Micro Photoelectric Sensor
I/O CIRCUIT AND WIRING DIAGRAMS
FIBER
SENSORS
LASER
SENSORS
PHOTOELECTRIC
SENSORS
NPN output type
I/O circuit diagram
MICRO
PHOTOELECTRIC
SENSORS
SAFETY LIGHT
CURTAINS /
SAFETY
COMPONENTS
PRESSURE /
FLOW
SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
Brown
Load
Black (Note)
(Brown) +V
ZD1
ZD2
Tr2
(Black) Output 1
(Note)
Load
50 mA max.
(White) Output 2 (Note)
T r1
D
(Blue) 0 V
Load
+
–
Load
50 mA max.
+
–
White (Note)
5 to 24 V DC
±10 %
5 to 24 V DC
±10 %
Blue
Note: Ensure to insulate the unused output wire.
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE
SENSORS
Wiring diagram (PM-25 series / PM-45 series)
Color code of cable type and
connector attached cable
Sensor circuit
AREA
SENSORS
PM-25 SERIES PM-45 SERIES PM-65 SERIES
Internal circuit
Users’ circuit
Output operation
Note: Ensure to insulate the unused output wire.
Symbols…D: Reverse supply polarity protection diode
ZD1, ZD2: Surge absorption zener diode
Tr1, Tr2: NPN output transistor
WIRE-SAVING
SYSTEMS
Color code
Output operation
Output 1
Black
Light-ON
Output 2
White
Dark-ON
Terminal arrangement diagram (PM-65 series)
MEASUREMENT
SENSORS
STATIC
CONTROL
DEVICES
1
LASER
MARKERS
HUMAN
MACHINE
INTERFACES
ENERGY
MANAGEMENT
SOLUTIONS
MACHINE
VISION
SYSTEMS
Convergent
Reflective
PM-25/PM-45/
PM-65
Designation
1
+V
2
Output 1: Light-ON
3
Output 2: Dark-ON
4
0V
Wiring diagram (PM-25 series / PM-45 series)
Color code of cable type and
connector attached cable
Sensor circuit
D
U-shaped
4
PNP output type
I/O circuit diagram
UV
CURING
SYSTEMS
Selection
Guide
3
Terminal No.
PLC
FA
COMPONENTS
2
(Brown) +V
Tr1
Tr2
ZD1
ZD2
Brown
Black (Note)
+
50 mA max.
(Black) Output 1 (Note)
50 mA max.
(White) Output 2 (Note)
Load
(Blue) 0 V
+
Load
–
White (Note)
5 to 24 V DC
±10 %
Load
–
5 to 24 V DC
±10 %
Load
Blue
Note: Ensure to insulate the unused output wire.
Internal circuit
Users’ circuit
Note: Ensure to insulate the unused output wire.
Symbols…D: Reverse supply polarity protection diode
ZD1, ZD2: Surge absorption zener diode
Tr1, Tr2: PNP output transistor
Output operation
Color code
Output operation
Output 1
Black
Light-ON
Output 2
White
Dark-ON
Terminal arrangement diagram (PM-65 series)
1
2
3
4
Terminal No.
Designation
1
+V
2
Output 1: Light-ON
3
Output 2: Dark-ON
4
0V
U-shaped Micro Photoelectric Sensor
PM-25 SERIES PM-45 SERIES PM-65 SERIES
404
SENSING CHARACTERISTICS (TYPICAL)
FIBER
SENSORS
LASER
SENSORS
PM-25 series
PM-45 series
Sensing position
Sensing position
DarkON
DarkON
DarkON
5.5 mm
0.217 in
8.4 mm
0.331 in
SAFETY LIGHT
CURTAINS /
SAFETY
COMPONENTS
ℓ
2 mm
0.079 in
Beam
axis
0
AREA
SENSORS
7 mm
0.276 in
ℓ
ℓ
2 mm
0.079 in
LightON
MICRO
PHOTOELECTRIC
SENSORS
DarkON
6 mm
0.236 in
ℓ
PHOTOELECTRIC
SENSORS
1
2
3
0.039
0.079
0.118
Operating point ℓ (mm in)
4
0.157
LightON
0
1
2
3
0.039
0.079
0.118
Operating point ℓ (mm in)
4
0.157
LightON
Beam
axis
0
1
2
3
0.039
0.079
0.118
Operating point ℓ (mm in)
PRESSURE /
FLOW
SENSORS
LightON
4
0.157
0
1
2
3
0.039
0.079
0.118
Operating point ℓ (mm in)
4
0.157
PM-65 series
SIMPLE
WIRE-SAVING
UNITS
DarkON
DarkON
WIRE-SAVING
SYSTEMS
8.4 mm
0.331 in
MEASUREMENT
SENSORS
7 mm
0.276 in
ℓ
ℓ
STATIC
CONTROL
DEVICES
2 mm
0.079 in
Beam
axis
0
PARTICULAR
USE
SENSORS
SENSOR
OPTIONS
Sensing position
LightON
INDUCTIVE
PROXIMITY
SENSORS
1
2
3
0.039
0.079
0.118
Operating point ℓ (mm in)
4
0.157
LightON
LASER
MARKERS
0
1
2
3
0.039
0.079
0.118
Operating point ℓ (mm in)
4
0.157
PLC
HUMAN
MACHINE
INTERFACES
PRECAUTIONS FOR PROPER USE
• Never use this product as a sensing device
for personnel protection.
• In case of using sensing devices for personnel
protection, use products which meet laws and
standards, such as OSHA, ANSI or IEC etc.,
for personnel protection applicable in each
region or country.
Refer to p.1552~ for general precautions.
PM-45 series
• The following conditions must be observed when using
screws to mount the sensor unit.
Screw
Spring washer
Flat washer
Tightening torque
M3 screw
1 pc.
ø6 mm ø0.236 in
(small round washer)
0.5 N·m
ENERGY
MANAGEMENT
SOLUTIONS
FA
COMPONENTS
MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
M3 screws
Mounting
Selection
Guide
Spring washer
PM-25 series
• The following conditions must be observed when using
screws to mount the sensor unit.
Screw
Spring washer
Flat washer
Tightening torque
M2 screw
1 pc.
ø4.3 mm ø0.169 in
(small round washer)
0.15 N·m
M3 screw
1 pc.
ø6 mm ø0.236 in
(small round washer)
0.5 N·m
< When using M2 screws for mounting > < When using M3 screws for mounting >
M2 screws
Spring washer
Plain washer
Outer diameter
ø4.3 mm ø0.169 in
M3 screws
Spring washer
Plain washer
Outer diameter
ø6 mm ø0.236 in
When using the optional mounting screw set MS-M2, a
spring washer is included.
• In case the PM-25 series is used at an ambient
temperature of +50 °C +122 °F, or more, make sure to
mount it on a metal body.
Plain washer
Outer diameter
ø6 mm ø0.236 in
U-shaped
Convergent
Reflective
PM-25/PM-45/
PM-65
PM-65 series
• The following conditions must be observed when using
screws to mount the sensor unit.
Screw
M3 screw
Spring washer
Flat washer
Tightening torque
1 pc.
ø6 mm ø0.236 in
(small round washer)
0.5 N·m
M3 screws
Spring washer
Plain washer
Outer diameter
ø6 mm ø0.236 in
405
FIBER
SENSORS
LASER
SENSORS
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
SAFETY LIGHT
CURTAINS /
SAFETY
COMPONENTS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
U-shaped Micro Photoelectric Sensor
PRECAUTIONS FOR PROPER USE
Cable extension
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC
CONTROL
DEVICES
LASER
MARKERS
PLC
HUMAN
MACHINE
INTERFACES
ENERGY
MANAGEMENT
SOLUTIONS
FA
COMPONENTS
MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
U-shaped
Convergent
Reflective
PM-25/PM-45/
PM-65
Connection method
• Insert the connector attached cable CN‑14A-C□ /
CN‑14A-R-C□ in the connector part of this product as
shown in the figure below.
Lock release lever
Total cable length 100 m 328.084 ft
CN-14A-C□ / CN-14A-R-C□
Cable attached
to sensor
+V
Extension cable
Output
+
5 to 24 V DC
±10 %
–
0V
Housing: PAP-04V-S
(Manufactured by J.S.T. Mfg. Co., Ltd.)
Supply voltage: 4.5 V or more
But, when the overall cable length, including the cable
attached to the sensor, is as given below, there is no
need to confirm the voltage.
Conductor cross-section
area of extension cable
Total cable length
0.08 to 0.1 mm2
Up to 5 m 16.404 ft
2
0.2 mm
Up to 10 m 32.808 ft
0.3 mm2
Up to 20 m 65.617 ft
PM-65 series
• Cable extension is possible up to an overall length
of 100 m 328.084 ft with a 0.3 mm2, or more, cable.
However, since a voltage drop shall occur due to the
cable extension, ensure that the power supply voltage at
the end of the connector attached cable of the sensor or
at the sensor terminals is within the rating.
Total cable length 100 m 328.084 ft
Connector
+V
attached cable
Extension cable
Output
+
0V
–
5 to 24 V DC
±10 %
But, when the overall cable length, including the cable
attached to the sensor, is as given below, there is no
need to confirm the voltage.
Conductor cross-section
area of extension cable
Total cable length
0.08 to 0.1 mm2
Up to 5 m 16.404 ft
0.2 mm
Up to 10 m 32.808 ft
0.3 mm
Up to 20 m 65.617 ft
2
2
Connector pin No.
Terminal designation
+V
Output 1 Output 2
0V
Disconnection method
• Press and hold the lock release lever to disconnect the
cable connector.
Note: Pulling the cable without pressing the lock release lever in an attempt
to disconnect the connector can cause wire breakage in the cable or
damage to the connector.
Supply voltage: 4.5 V or more
Selection
Guide
Refer to p.1552~ for general precautions.
Wiring (PM-65 series)
PM-25 series / PM-45 series
• Cable extension is possible up to an overall length
of 100 m 328.084 ft with a 0.3 mm2, or more, cable.
However, since a voltage drop shall occur due to the cable
extension, ensure that the power supply voltage at the
end of the cable attached to the sensor is within the rating.
PARTICULAR
USE
SENSORS
SENSOR
OPTIONS
PM-25 SERIES PM-45 SERIES PM-65 SERIES
When using the product as an S-mark compatible
product in Korea
• The power supply cable and output cable connected to the
product must be less than 10 m 32.808 ft.
Others
• This device has been developed / produced for industrial
use only.
• Since the sensor is intended for
use inside machines, no special
countermeasures have been taken
against extraneous light. Take care
that extraneous light is not directly
incident on the beam receiving
section.
• Do not use during the initial transient time (50 ms) after
the power supply is switched on.
• Note that the cable of PM-□25-R loses its flexibility when
the ambient temperature decreases to about -10 °C +14 °F.
• The cable of PM-□25-R is a bending-resistant cable
usable on a moving base. When the sensor is mounted
on a moving base, secure the sensor cable joint at the
unit in place so that stress is not applied to it.
• When storing PM-□25-R, make sure that the cable
does not come into contact with the sensing section or
operation indicator.
• If the sensor is used in a place having excessive dust,
periodically clean the emitting and receiving sections with
a dry, soft cloth.
• If there is a large surge generating equipment, such as,
motor, solenoid, electromagnetic valve, etc., in the vicinity
of the sensor, use a surge absorber on that equipment.
Further, do not run the sensor cables along power lines
and use a capacitor between +V and 0 V, if required.
Use the sensor after confirming that the surge has been
eliminated.
U-shaped Micro Photoelectric Sensor
PM-25 SERIES PM-45 SERIES PM-65 SERIES
DIMENSIONS (Unit: mm in)
The CAD data can be downloaded from our website.
PM-K25□
Sensor
Operation indicator (Orange)
23.9
0.941
18.7
0.736
13.4
0.528
6
0.236
2 0.079
12 6
0.472 0.236
8
0.315
5.5 Beam
0.217 axis
5 0.197
2-ø3.2 ø0.126
mounting holes
ø6
ø0.236
13.4
0.528
6
0.236
Beam size:
1.2 × 0.8 0.047 × 0.031
AREA
SENSORS
SAFETY LIGHT
CURTAINS /
SAFETY
COMPONENTS
PRESSURE /
FLOW
SENSORS
Operation indicator (Orange)
2
0.079
INDUCTIVE
PROXIMITY
SENSORS
6
0.236
Beam size:
1.2 × 0.8 0.047 × 0.031
4 0.157
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
PM-L25(-P)
PM-U25□
Sensor
PM-F25□
Sensor
Operation indicator (Orange)
Operation indicator (Orange)
2 0.079
5.5 Beam
0.217 axis
16
0.630
11.5
0.453
2-ø3.2 ø0.126
mounting holes
Operation indicator (Orange)
Beam size:
1.2 × 0.8 0.047 × 0.031
3
0.118
11.7
0.461
6.2
0.244
Beam size:
1.2 × 0.8 0.047 × 0.031 1.5 0.059
(2 0.079)
5
3.2 0.126 0.197
ø2
ø0.079
1.6
0.063
Elongated
mounting hole
1.95 0.077
ø2.5 ø0.098 cable
8
0.315
PM-U25(-P)
12.5 12 8 0.315
0.492 0.472
R1.6
R0.063
ø2.5 ø0.098 cable
MEASUREMENT
SENSORS
STATIC
CONTROL
DEVICES
6 Beam
0.236 axis
Beam
axis
13.4
0.528
6
0.236
PARTICULAR
USE
SENSORS
SENSOR
OPTIONS
ø2.5 ø0.098 cable
2
0.079
PM-K25(-P)
6 3 0.118
0.236
LASER
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
1.6
0.063
3.2
0.126
10 12
0.394 0.472
ø2.5 ø0.098 cable
FIBER
SENSORS
PHOTOELECTRIC
SENSORS
1.75
0.069
2-elongated mounting holes
Beam
axis
6
0.236
8 0.315
Sensor
Operation indicator (Orange)
Operation indicator
(Orange)
5.5 Beam
12.3 0.217 axis
0.484
1.7
0.067
PM-L25□
3
0.118
3 0.118
6 Beam
0.236 axis
406
4
0.157
6.7
0.264
13.4
0.528
6
0.236
LASER
MARKERS
Operation indicator
(Orange)
Beam 5.5
axis 0.217
PLC
HUMAN
MACHINE
INTERFACES
ENERGY
MANAGEMENT
SOLUTIONS
FA
COMPONENTS
2
0.079
ø4.8
ø0.189
MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
PM-F25(-P)
PM-R25□
Sensor
Selection
Guide
U-shaped
Convergent
Reflective
Beam 6
axis 0.236
Operation indicator
(Orange)
PM-25/PM-45/
PM-65
4
0.157
6.7
0.264
Operation indicator
(Orange)
5.5 Beam
0.217 axis
2 0.079
13.4
0.528
6
0.236
Beam size:
1.5
0.059 1.2 × 0.8 0.047 × 0.031
R1.6
(2 0.079)
R0.063
12
8 0.315 0.472 12.5
0.492
ø2.5 ø0.098 cable
ø4.8
ø0.189
PM-R25(-P)
5 0.197 3.2 0.126
Elongated
mounting hole
1.6 0.063
11.7
0.461
6.2
0.244
3
0.118
ø2
ø0.079
1.95 0.077
407
FIBER
SENSORS
LASER
SENSORS
U-shaped Micro Photoelectric Sensor
DIMENSIONS (Unit: mm in)
Sensor
25.4
1.000
19
0.748
MICRO
PHOTOELECTRIC
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE
SENSORS
PM-T45□
Sensor
Operation indicator (Orange)
3.5
0.138
7
0.276
AREA
SENSORS
PRESSURE /
FLOW
SENSORS
The CAD data can be downloaded from our website.
PM-K45□
PHOTOELECTRIC
SENSORS
SAFETY LIGHT
CURTAINS /
SAFETY
COMPONENTS
PM-25 SERIES PM-45 SERIES PM-65 SERIES
Operation indicator (Orange)
2-ø3.2 ø0.126
mounting holes
19
0.748
13.4
0.528
6
0.236
Operation indicator
(Orange)
2-ø3.8 ø0.150
mounting holes
6
Beam size:
1.2 × 0.8 0.047 × 0.031 0.236
2
0.079
Beam
axis
15.2
0.598
2-elongated
mounting holes
PM-T45
PM-K45
PM-L45□
Sensor
STATIC
CONTROL
DEVICES
26 1.024
Sensor
7
0.276
Operation indicator (Orange)
ø2.5 ø0.098 cable
5 0.197
1.5
0.059
14.6
0.575
6
2 Beam size:
0.079 1.2 × 0.8 0.047 × 0.031 0.236
Beam
axis
9
0.354 12.6
0.496
8.4 0.331
7.2 0.283
UV
CURING
SYSTEMS
ø2.5 ø0.098 cable
Operation indicator (Orange)
19 0.748
13.4
0.528
6
0.236
2-ø3.2 ø0.126
mounting holes
2-ø3.5 ø0.138 mounting holes
7.5 0.295
7 0.276
20.6 6
0.811 0.236
2-elongated mounting holes
4
0.157
ENERGY
MANAGEMENT
SOLUTIONS
MACHINE
VISION
SYSTEMS
3.5
0.138
3.5 0.138
10 7 0.276 3.2 0.126
0.394
HUMAN
MACHINE
INTERFACES
PM-Y45□
Operation indicator (Orange)
19 0.748
PLC
FA
COMPONENTS
2.5
0.098
ø2.5 ø0.098 cable
WIRE-SAVING
SYSTEMS
LASER
MARKERS
8.4 0.331
3.2 0.126
Operation indicator
(R)
(Orange)
4.3
0.169
ø2.5 ø0.098 cable
SIMPLE
WIRE-SAVING
UNITS
MEASUREMENT
SENSORS
2
0.079
0.244
5.5
0.217
SENSOR
OPTIONS
19 0.748
6
0.236
13
17.2
18.1 0.677 0.512
0.713
6.2
Beam
axis
13.8
0.543
8.4 0.331
17.2
21.3 0.677
0.839
11 0.433
13.7
0.539
13.4
0.528
6
0.236
26 1.024
Beam size:
1.2 × 0.8 0.047 × 0.031
4.5
0.177
13.4
0.528
6
0.236
14.6
0.575
2 0.079
8.4 0.331
Beam size:
1.2 × 0.8 0.047 × 0.031
2
0.079
Beam
axis
12.6
0.496
4.5
0.177
2.5
0.098
Operation indicator (Orange)
2
0.079
PM-L45
Selection
Guide
PM-F45□
Sensor
PM-R45□
Sensor
PM-Y45
U-shaped
Operation indicator (Orange)
Convergent
Reflective
Operation indicator
(Orange)
PM-25/PM-45/
PM-65
Operation indicator
(Orange)
8.4 0.331
13.6
0.535
2.5 0.098
13.7
0.539
13.4
0.528
6
0.236
Beam size:
1.2 × 0.8 0.047 × 0.031
2
0.079
Beam
axis
15.2
0.598
9 0.354
7
0.276
2-ø3.5 ø0.138
mounting holes
ø2.5 ø0.098 cable
13
0.512
7
0.276
6 0.236
17.2
0.677 21.3
0.839
Beam size:
1.2 × 0.8 0.047 × 0.031
6 0.236
17.2
21.3 0.677
0.839
13
0.512
7
0.276
2
0.079
9 0.354
7
0.276
Beam
axis
15.2
0.598
2-ø3.5 ø0.138
mounting holes
ø2.5 ø0.098 cable
PM-R45
PM-F45
13.7
0.539
13.4
0.528
6
0.236
Operation indicator
(Orange)
8.4 0.331
13.6
0.535
2.5 0.098
U-shaped Micro Photoelectric Sensor
PM-25 SERIES PM-45 SERIES PM-65 SERIES
DIMENSIONS (Unit: mm in)
The CAD data can be downloaded from our website.
PM-K65 PM-K65-P
Sensor
PM-T65 PM-T65-P
Sensor
Operation indicator (Orange)
26 1.024
20 0.787
6.5
0.256
Beam size:
1.2 × 0.8 0.047 × 0.031
26 1.024
20 0.787
6
7
0.276 0.236
Beam
axis
2
0.079
22.4
0.882
8.3
0.327
3.7 0.146
Sensor
4.1 0.161
1.6 0.063
26 1.024
20 0.787
6.5
0.256
Beam size:
1.2 × 0.8 0.047 × 0.031
6
0.236
(2 0.079)
3
0.118
6 13.4
0.236 0.528
4 0.157
Beam axis
Operation indicator
(Orange)
10
0.394
14.9
0.587
Sensor
13.4
0.528
6
0.236
Beam size:
1.2 × 0.8 0.047 × 0.031
9 0.354
12.9 0.508
HUMAN
MACHINE
INTERFACES
ENERGY
MANAGEMENT
SOLUTIONS
FA
COMPONENTS
Operation indicator (Orange)
MACHINE
VISION
SYSTEMS
7.2 0.283
20 0.787
LASER
MARKERS
PLC
6.5
0.256
Beam
axis
MEASUREMENT
SENSORS
STATIC
CONTROL
DEVICES
Beam
axis
2-mounting
holes
8.4 0.331
Operation indicator
(Orange)
PM-T65W(-P)
Sensor
7
6
15.7 0.276 0.236
0.618
3.2
0.126
(2 0.079)
INDUCTIVE
PROXIMITY
SENSORS
SIMPLE
WIRE-SAVING
UNITS
26.2 1.031
Beam axis
PRESSURE /
FLOW
SENSORS
WIRE-SAVING
SYSTEMS
20 0.787
3.9 0.154
1.7 0.067
13 0.512
MICRO
PHOTOELECTRIC
SENSORS
SENSOR
OPTIONS
Operation indicator (Orange)
7.4 0.291
6
0.236
PM-Y65 PM-Y65-P
7
0.276
PM-L65 PM-L65-P
2-elongated
mounting holes
PHOTOELECTRIC
SENSORS
PARTICULAR
USE
SENSORS
PM-T65(-P)
PM-T65W PM-T65W-P
7.4
0.291
14
0.551
Beam
axis
2
0.079
Beam
axis
PM-K65(-P)
2.3 0.091
Operation indicator (Orange)
6 13.4
0.236 0.528
13.7
0.539
2-mounting holes
2 0.079
3.7 0.146
20 0.787
8.4
0.331
LASER
SENSORS
SAFETY LIGHT
CURTAINS /
SAFETY
COMPONENTS
Beam size: 1.2 × 0.8 0.047 × 0.031
6
0.236
Operation indicator (Orange)
Operation indicator (Orange)
FIBER
SENSORS
AREA
SENSORS
13
0.512
4.1
0.161
13.8
0.543
16.7
0.657
7.4 0.291
1.6 0.063
Beam
8.4 0.331 axis
22.4
3.2 0.126
0.882
7.4 0.291
22.4 0.882
8.4
8.3
0.331
0.327
2-elongated mounting holes
6.2 3.2 0.126
0.244
3.5 0.138
2-ø3.2 ø0.126 mounting holes
13.4
0.528
6
0.236
408
UV
CURING
SYSTEMS
2-ø3.2 ø0.126 mounting holes
26.2 1.031
PM-F65 PM-F65-P
Sensor
PM-L65(-P)
Selection
Guide
U-shaped
Operation indicator (Orange)
2-ø3.5 ø0.138
mounting holes
7
0.276
Operation indicator (Orange)
6.5 0.256 6 0.236
2.5 0.098
3.5 0.138
7
0.276
22.7 Beam
0.894 axis
6
0.236
3 0.118
Beam size:
1.2 × 0.8 0.047 × 0.031
3
0.118
Operation indicator (Orange)
13.4
0.528
6
0.236
Beam
14.9 8.4 0.331 axis
0.587
2
0.079
6.5
0.256
ø2.4 ø0.094
16.3
0.642
8.3
7.7
0.303 0.327
4.1 0.161
PM-Y65(-P)
2.5
0.098
Beam size:
1.2 × 0.8 0.047 × 0.031
13.4
0.528
6
(2 0.079)
0.236
8.4
3.2
0.331
0.126
3.7 2.1
22.4
0.146 0.083 0.882
Operation indicator (Orange)
12.9
0.508
Beam
axis
7
0.276
13.5
0.531
Elongated mounting hole
PM-F65(-P)
Beam
axis
Convergent
Reflective
PM-25/PM-45/
PM-65
409
FIBER
SENSORS
LASER
SENSORS
U-shaped Micro Photoelectric Sensor
DIMENSIONS (Unit: mm in)
AREA
SENSORS
SAFETY LIGHT
CURTAINS /
SAFETY
COMPONENTS
13.7
0.539
7
0.276
Sensor
Beam
axis
13.4
0.528
6
0.236
Operation indicator
(Orange)
13
0.512
7
0.276
8.3 0.327
(2 0.079)
9 0.354
13.6 7
0.535 0.276
Beam
axis
11.4
0.449
Sensor
Operation indicator (Orange)
PLC
6.5 0.256
6 0.236
(2 0.079)
13
0.512
7
0.276
Beam size:
1.2 × 0.8 0.047 × 0.031
Operation indicator (Orange)
2-ø3.5 ø0.138
mounting holes
9 0.354
11.4
0.449
7 0.276 13.6
0.535
PM-R65W(-P)
U-shaped
Convergent
Reflective
PM-25/PM-45/
PM-65
16.3
0.642
3.7 0.146
4.1 0.161
7
0.276
13.5
0.531
Elongated
mounting hole
13.4
0.528
6
0.236
8.3 0.327
Connector attached cable (Optional)
35
1.378
50
1.969
8
0.315
8
0.315
2.5 0.098
ø3.7 ø0.146 cable
Beam
axis
22.4
0.882
CN-14A-C□ CN-14A-R-C□
L
13.7
0.539
7
0.276
Beam
axis
UV
CURING
SYSTEMS
Selection
Guide
3.2
0.126
PM-R65(-P)
PM-R65W PM-R65W-P
LASER
MARKERS
MACHINE
VISION
SYSTEMS
8.4 0.331
PM-F65W(-P)
STATIC
CONTROL
DEVICES
FA
COMPONENTS
ø2.4
ø0.094
2.5 0.098
2.1
0.083
WIRE-SAVING
SYSTEMS
ENERGY
MANAGEMENT
SOLUTIONS
Operation indicator (Orange)
13.4
0.528
6
0.236
8.3 0.327 7.7 0.303
SIMPLE
WIRE-SAVING
UNITS
HUMAN
MACHINE
INTERFACES
6
6.5
0.236 0.256
22.4
0.882
SENSOR
OPTIONS
MEASUREMENT
SENSORS
3
0.118
3
0.118
Beam size:
1.2 × 0.8 0.047 × 0.031
6.5 0.256
6 0.236
(2 0.079)
2-ø3.5 ø0.138
mounting holes
22.4
0.882
PARTICULAR
USE
SENSORS
Sensor
Beam
axis
Beam size:
1.2 × 0.8 0.047 × 0.031
2.5 0.098
PM-R65 PM-R65-P
Operation indicator (Orange)
Operation indicator (Orange)
Beam
axis
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
The CAD data can be downloaded from our website.
PM-F65W PM-F65W-P
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
PM-25 SERIES PM-45 SERIES PM-65 SERIES
• Length L
Model No.
Length L
CN-14A(-R)-C1
1,000 39.370
CN-14A(-R)-C2
2,000 78.740
CN-14A(-R)-C3
3,000 118.110
CN-14A(-R)-C5
5,000 196.850
410
MEMO
工商网监
湘ICP备2023018690号
