PMH-30M-AC24V

* Refer to our website for details of product. Timer PMH Timer Related Information RoHS compliance ■■General terms and conditions.............. F-3 ■■Options.......................................... P.1426 ■■Selection guide............................ P.1383~ FIBER SENSORS LASER SENSORS Features • Using a dedicated IC, the operation time variance is ±0.5 %. • Using the slide, time range switching is easy. Moreover, the scale numbers on the dial and time units can be switched automatically. Button position panasonic.net/id/pidsx/global Compact timers with four switchable time ranges 10 10 1 1 M M Type S 10 M type 30 M type 10 H type 30 H type S 0.05 S to 1.0 S 0.15 S to 3.0 S 0.05 M to 1.0 M 0.15 M to 3.0 M 0.5 S to 10 S 1.5 S to 30 S 0.5 M to 10 M 1.5 M to 30 M 0.05 M to 1.0 M 0.15 M to 3.0 M 0.05 H to 1.0 H 0.15 H to 3.0 H 0.5 M to 10 M 1.5 M to 30 M 0.5 H to 10 H 1.5 H to 30 H S: Sec, M: Min, H: Hours • You can use for embedding if you use together with the appropriate flush type mounting frame designed for that purpose (sold separately). Time selectable Operating voltage PMH timer 100 to 120 V AC 200 to 240 V AC 12 V DC 24 V DC 48 V DC 100 to 110 V DC 10 M type Model No. 30 M type Model No. PMH-10M-AC120V PMH-10M-AC220V PMH-10M-DC12V PMH-10M-DC24V PMH-10M-DC48V PMH-10M-DC100V MICRO PHOTOELECTRIC SENSORS AREA SENSORS SAFETY LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS 30 H type Model No. PMH-10H-AC120V PMH-10H-AC220V PMH-10H-DC12V PMH-10H-DC24V PMH-10H-DC48V PMH-10H-DC100V PMH-30H-AC120V PMH-30H-AC220V PMH-30H-DC12V PMH-30H-DC24V PMH-30H-DC48V PMH-30H-DC100V LASER MARKERS PLC HUMAN MACHINE INTERFACES ENERGY MANAGEMENT SOLUTIONS FA COMPONENTS Ordering information Ex. PMH Timer type PMH Timer 10 H type Model No. PMH-30M-AC120V PMH-30M-AC220V PMH-30M-DC12V PMH-30M-DC24V PMH-30M-DC48V PMH-30M-DC100V PHOTOELECTRIC SENSORS STATIC CONTROL DEVICES PRODUCT TYPES Product name 1398 10M 120 V AC Time range 10M 30M 10H 30H 0.05 to 1 s 0.15 to 3 s 0.05 to 1 min 0.15 to 3 min 0.5 to 10 s 1.5 to 30 s 0.5 to 10 min 1.5 to 30 min TIME RANGE Rated operating voltage 0.05 to 1 min 0.15 to 3 min 0.05 to 1 h 0.15 to 3 h 0.5 to 10 min 1.5 to 30 min 0.5 to 10 h 1.5 to 30 h 120 V AC: 100 to 120 V AC 220 V AC: 200 to 240 V AC 12 V DC: 12 V DC 24 V DC: 24 V DC OPERATION MODE Time range Scale intervals 1.0 3.0 10 30 0.05 0.1 0.5 1 Time Switches Set time Timed-out contact (NO) Timed-out contact (NC) ON Counters OFF Hour Meters UP(Yellow) ON OFF OFF UV CURING SYSTEMS Timers ON(Red) Power supply MACHINE VISION SYSTEMS ON ·During UP: Yellow stays on ·During ON: Red stays on PRECAUTIONS DURING USAGE • In order to maintain the characteristics of PHM timer, do not remove the case. • Please use within an ambient temperature range of -10 to +50 °C +14 to 122 °F and in humidity no greater than 85 % RH. • Prevent using PMH timer in such places where flammable or corrosive gas is generated, a lot of dust exists or considerable shock and vibration occur. • Since the main body cover and knob are made of polycarbonate resin, prevent contact with organic solvents such as methyl alcohol, benzene and thinner, or strong alkaline materials such as ammonia and caustic soda. • Do not make direct solder connections to the round pins. • Carefully verify the terminal numbers when wiring the terminal socket and cap. • When rotating the knob, note that there are stoppers located just past the "0" side and the full scale side. Therefore, do not use unreasonable force. • Please use with a time setting that is no less than the minimum time limit. The minimum time limit is indicated on the dial by the mark. • The contacts will not operate if the needle is adjusted to the "0" position when the power is off. • Phase synchronization for AC load switching When timer output contact will be synchronized to the AC power phase, the electrical life may be compromised and locking (contact reset failure) may occur due to contact welding or contact transference. Therefore, please conduct tests using actual equipment. Options Limit Switches Temperature Controllers Solenoids Fan Motors Selection Guide LT4H series QM4H PM4S PM4H series S1DXM-A/M S1DX PMH