QM4HS-U2C-48V

qm4h.fm Seite 44 Montag, 28. Juni 2004 12:01 12 QM4H Timers DIN 48 SIZE DIGITAL TIMER Possible to set and change the time with front digit switches easily during the power off. Furthermore single unit has a time range of 0.01s to 9990hrs!! FEATURES 1. Possible to set and change the time and the time range even when the power is off. 2. Selectable 8 different time ranges with front digit switches. 3. [QM4H-S Type] It can select the mode with MODE switch. T.D. MODE: Time delay 2C (2 Form C) INST. MODE: Time delay 1C (1 Form C) Instantaneous 1C (1 Form C) [QM4H-G Type] Reset and stop signal input enable to external control. S Type (with MODE switch) G Type PRODUCT TYPES Product name Time delay direction S Type QM4H digital timer Addition G Type QM4H digital timer Time range 0.01s/0.1s/1s/0.1min/ 1min/0.1h/1h/10h (8 time ranges) Operating mode Contact arrangement Operating voltage Part number T.D. mode: Time delay 2C INST. mode: Time delay 1C and Instantaneous 1C (Use MODE switch on front) 12 to 48 V AC/DC QM4HS-U2C-48V Power ON delay 100 to 240 V AC/DC QM4HS-U2C-240V 12 to 48 V AC/DC QM4HG-U1C-48V 100 to 240 V AC/DC QM4HG-U1C-240V Power ON delay (with reset and stop terminals) Time delay 1C Note: Time delay directional subtraction types are also available by order PART NAMES QM4H-S TIMER Time delay indicator MODE switch (QM4H-S type only) Set time display Time setting switch (3 digits) Protective construction: Elapsed time display (OP.LED) MODE T.D. INST. - - - 8 8 8 S - + + + + Time range switch 44 07/2004 QM4H: IP40 with cover AQM4801: IP50 with cover AQM4803: IP64 qm4h.fm Seite 45 Freitag, 11. Juni 2004 9:31 09 QM4H TIME RANGE SETTINGS Time range switch .01 S 0.1 S S 0.1 M M 0.1 H H 10 H Operating time range 0.01s to 9.99s 0.1s to 99.9s 1s to 999s 0.1min. to 99.9min 1min. to 999min 0.1h to 99.9h 1h to 999h 10h to 9990h .01 S 0.1 S .01 S 0.1 S 0.1 M S M 0.1 H H 10 H Note that there are two settings with the same range. SPECIFICATIONS Type QM4H-S Item Rated operating voltage 12 to 48 V AC/DC Rated power consumption 100 to 240 V AC/DC Rating Time accuracy*1 Contact Life*3 Rated frequency Rated control capacity Time range Operation mode Min. input signal width Operating time fluctuation Temperature error Setting error Voltage error Contact arrangement Contact material Mechanical (contact) Electrical (contact) Allowable operating voltage range Breakdown voltage (Initial value) Electrical Insulation resistance (Initial value) Reset time Mechanical Operating conditions Others Functional Destructive Functional Shock resistance Destructive Ambient temperature Ambient humidity Air pressure Mass (Weight) Available standards Operating display Vibration resistance QM4H-G 12 to 48 V AC/DC and 100 to 240 V AC/DC 12 V DC, 48 V DC: Max. 1.5W During time 12 V DC, 48 V DC: Max. 1.0W 12 V AC, 48 V AC: Max. 3.0 VA delay 12 V AC, 48 V AC: Max. 2.0 VA 12 V DC, 48 V DC: Max. 2.5W After time 12 V DC, 48 V DC: Max. 1.5W 12 V AC, 48 V AC: Max. 5.0 VA delay 12 V AC, 48 V AC: Max. 3.5 VA 100 V DC, 240 V DC: Max. 1.5W During time 100 V DC, 240 V DC: Max. 1.0W 100 V AC, 240 V AC: Max. 3.0 VA delay 100 V AC, 240 V AC: Max. 2.5 VA 100 V DC, 240 V DC: Max. 2.0W After time 100 V DC, 240 V DC: Max. 1.8W 100 V AC, 240 V AC: Max. 4.0 VA delay 100 V AC, 240 V AC: Max. 3.2 VA 50/60 Hz common (at AC) 5 A, 250V AC (resistive load) 0.01s to 9990h, Selection of 8 range: 0.01s/0.1s/1s/0.1min/1min/0.1h/1h/10h Power ON delay Power ON delay (with reset and stop terminals) — 20ms (Reset and Stop inputs)*4 ±(0.01%+0.05s) in case of power on start ±(0.005%+0.03s) in case of input reset start*2 Operating voltage: 85 to 110% V Temperature: –10 to +55°C +14 to 131°F (20°C 68°F) Stopped time: 0.1 sec to 1 hour T.D. mode: Time delay 2C INST. mode: Time delay 1C and Time delay 1C Instantaneous 1C (Use MODE switch on front) Silver alloy Min. 107 5 Min. 10 (at rated control vltage) 85 to 110% of rated operating voltage Between live and dead metal parts, between input and output, between contact sets, between contacts Min. 100 MΩ (at 500 V DC megger) Between live and dead metal parts: 2, 000 Vrms for 1 min Between input and output: 2, 000 Vrms for 1 min Between contact sets: 2, 000 Vrms for 1 min Between contacts: 1, 000 Vrms for 1 min Max. 0.1s 10 to 55 Hz: 1 cycle/min. single amplitude of 0.25 mm .010 inch (10 min on 3 axes) 10 to 55 Hz: 1 cycle/min. single amplitude of 0.375 mm .015 inch (1h on 3 axes) 98 m/s2 (4 times on 3 axes) 980 m/s2 (5 times on 3 axes) –10°C to 55°C +14°F to +131°F Max. 85% RH (non-condensing) 860 to 1060 hPa Approx. 130 g 4.59 oz Approx. 120 g 4.23 oz UL, C-UL, CE LED (red), During time delay: blinking, After time delay: OFF During time delay After time delay During time delay After time delay Notes: 1. Unspecified measuring conditions are rated operating voltage (in case of DC type, ripple rate of 5% or less), ambient temp. 20°C 68°F, and stop time 1 second. 2. Reset start applies to QM4H-G type. 3. Excluding switches 4. Note that if the QM4H-G type is set to zero “0” and a STOP signal is input, output will begin when the power is turned on. 45 07/2004 qm4h.fm Seite 46 Donnerstag, 1. Juli 2004 3:10 15 QM4H DIMENSIONS • S Type (units: mm inch) Tolerance: ±1.0 .039 • G Type 48 1.890 6 .236 72.5 2.854 Terminal layouts and Wiring diagrams • QM4H-S Type 12.9 .508 NC NC NO QM4H-S TIMER NO 4 QM4H-G TIMER 3 MODE MODE T.D. INST. - - - - - - - - 8 8 8 S 8 8 8 S + + + + + + + + 5 6 2 44.5 1.752 7 1 8 COM COM Operating voltage TD mode: Time delay 2C INST mode: Time delay 1C and Instantaneous 1C *Use MODE switch on front MODE 9.5 .374 Panel cut-out dimensions (85.4) (3.362) T.D. Panel Mounting Diagram Notes: 1. Operating voltage signs in parentheses ( ) indicate the polarity of the DC type. Mounting frame (AQM4812: supplied) (AT8-DA4 can also be used for mounting frame. Sold separately) Mounting screw (supplied with mounting frame) 45+0.6 0 1.772+.024 0 INST. 2. is a time delay contact. 45+0.6 0 1.772+.024 0 is an instantaneous contact. • QM4H-G Type 45+0.6 0 1.772+.024 0 STOP NC RESET NO 4 5 3 A 6 2 Dimensions A when n products are installed continuously: +.024 A = (48∗n–2.5 +0.6 0 ) A = (1.890∗n–.098 0 ) 7 1 8 COM Panel (Thickness: 1 to 5 mm .039 to .197 inch) COM Operating voltage OPERATION MODE • QM4H-S Type 1) T.D. mode • QM4H-G Type ON ON Power supply OFF Power supply T ON Time delay contact (N.O. contact) 1-3 or 6-8 ON Reset 1-3 ON ON OFF Stop 1-4 ta Time delay contact (N.O. contact) 6-8 OP.LED 2) INST. mode T ON t1 t2 ON OP.LED ON Time delay contact (N.O. contact) 6-8 T: Setting time OFF Power supply T Lit ON OFF ON Instantaneous contact (N.O. contact) 1-3 OFF Blinking t1+t2 = T ta